aptitude-robot-1.5.5/0000755000175000017500000000000014165301205011462 500000000000000aptitude-robot-1.5.5/etc/0000755000175000017500000000000014165301205012235 500000000000000aptitude-robot-1.5.5/etc/aptitude-robot/0000755000175000017500000000000014165301205015177 500000000000000aptitude-robot-1.5.5/etc/aptitude-robot/pkglist.d/0000755000175000017500000000000014165301205017076 500000000000000aptitude-robot-1.5.5/etc/aptitude-robot/pkglist.d/README.txt0000644000175000017500000000026212042773671020530 00000000000000Place package lists in this directory. Files with periods in their name are ignored. If no package list file is placed here, aptitude-robot will perform `aptitude install ~U`. aptitude-robot-1.5.5/etc/aptitude-robot/triggers.pre/0000755000175000017500000000000014165301205017612 500000000000000aptitude-robot-1.5.5/etc/aptitude-robot/triggers.pre/README.txt0000644000175000017500000000031612042773671021244 00000000000000Scripts in this directory are executed before aptitude is run. Files with periods in their name are ignored. If in doubt do not place a script here. It would be executed every time aptitude-robot is run. aptitude-robot-1.5.5/etc/aptitude-robot/triggers.post/0000755000175000017500000000000014165301205020011 500000000000000aptitude-robot-1.5.5/etc/aptitude-robot/triggers.post/README.txt0000644000175000017500000000031512042773671021442 00000000000000Scripts in this directory are executed after aptitude is run. Files with periods in their name are ignored. If in doubt do not place a script here. It would be executed every time aptitude-robot is run. aptitude-robot-1.5.5/etc/aptitude-robot/triggers.post/90-cleanup.example0000755000175000017500000000041013003242406023156 00000000000000#!/bin/sh echo '----- 90-cleanup: package cache and config file cleanup' # Purge all packages that have been removed. In a managed environment we do # not want to carry around obsolete config files. # aptitude -y -q purge '~c' apt-get clean dpkg --clear-avail aptitude-robot-1.5.5/etc/aptitude-robot/options.d/0000755000175000017500000000000014165301205017114 500000000000000aptitude-robot-1.5.5/etc/aptitude-robot/options.d/10-remove-level-maximum0000644000175000017500000000046412412354663023267 00000000000000# Tell aptitude's resolver that we prefer updating, installing or # keeping packages over removing them. # # See http://aptitude.alioth.debian.org/doc/en/ch02s03s05.html#secDependencyResolutionHints -o Aptitude::ProblemResolver::Remove-Level=maximum -o Aptitude::ProblemResolver::Hints::=reject !~M :UNINST aptitude-robot-1.5.5/LICENSE0000644000175000017500000010437112757426511012432 00000000000000 GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things. To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it. For the developers' and authors' protection, the GPL clearly explains that there is no warranty for this free software. For both users' and authors' sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users' freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS 0. Definitions. "This License" refers to version 3 of the GNU General Public License. "Copyright" also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. "The Program" refers to any copyrightable work licensed under this License. Each licensee is addressed as "you". "Licensees" and "recipients" may be individuals or organizations. To "modify" a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a "modified version" of the earlier work or a work "based on" the earlier work. A "covered work" means either the unmodified Program or a work based on the Program. To "propagate" a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well. To "convey" a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying. An interactive user interface displays "Appropriate Legal Notices" to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion. 1. Source Code. The "source code" for a work means the preferred form of the work for making modifications to it. "Object code" means any non-source form of a work. A "Standard Interface" means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. The "System Libraries" of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A "Major Component", in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it. The "Corresponding Source" for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the work's System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work. For example, Corresponding Source includes interface definition files associated with source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work. The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source. The Corresponding Source for a work in source code form is that same work. 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you. Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary. 3. Protecting Users' Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures. When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work's users, your or third parties' legal rights to forbid circumvention of technological measures. 4. Conveying Verbatim Copies. You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program. You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions: a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to "keep intact all notices". c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it. d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so. A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an "aggregate" if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation's users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate. 6. Conveying Non-Source Forms. You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways: a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange. b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge. c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord with subsection 6b. d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements. e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. A "User Product" is either (1) a "consumer product", which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, "normally used" refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of use of the product. "Installation Information" for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made. If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has been installed in ROM). The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network. Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying. 7. Additional Terms. "Additional permissions" are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions. When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission. Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms: a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or d) Limiting the use for publicity purposes of names of licensors or authors of the material; or e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors. All other non-permissive additional terms are considered "further restrictions" within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying. If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the additional terms that apply to those files, or a notice indicating where to find the applicable terms. Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way. 8. Termination. You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11). However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice. Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10. 9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so. 10. Automatic Licensing of Downstream Recipients. Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. An "entity transaction" is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party's predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. 11. Patents. A "contributor" is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor's "contributor version". A contributor's "essential patent claims" are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor version. For purposes of this definition, "control" includes the right to grant patent sublicenses in a manner consistent with the requirements of this License. Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, a "patent license" is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To "grant" such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party. If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. "Knowingly relying" means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient's use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it. A patent license is "discriminatory" if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007. Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law. 12. No Surrender of Others' Freedom. If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program. 13. Use with the GNU Affero General Public License. Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such. 14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU General Public License "or any later version" applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation. If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the Program. Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version. 15. Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. Limitation of Liability. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 17. Interpretation of Sections 15 and 16. If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively state the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . Also add information on how to contact you by electronic and paper mail. If the program does terminal interaction, make it output a short notice like this when it starts in an interactive mode: Copyright (C) This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, your program's commands might be different; for a GUI interface, you would use an "about box". You should also get your employer (if you work as a programmer) or school, if any, to sign a "copyright disclaimer" for the program, if necessary. For more information on this, and how to apply and follow the GNU GPL, see . The GNU General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. But first, please read . aptitude-robot-1.5.5/configure0000755000175000017500000032371714165301201013322 00000000000000#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.71 for Aptitude Robot 1.5.5. # # Report bugs to . # # # Copyright (C) 1992-1996, 1998-2017, 2020-2021 Free Software Foundation, # Inc. # # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh as_nop=: if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1 then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else $as_nop case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi # Reset variables that may have inherited troublesome values from # the environment. # IFS needs to be set, to space, tab, and newline, in precisely that order. # (If _AS_PATH_WALK were called with IFS unset, it would have the # side effect of setting IFS to empty, thus disabling word splitting.) # Quoting is to prevent editors from complaining about space-tab. as_nl=' ' export as_nl IFS=" "" $as_nl" PS1='$ ' PS2='> ' PS4='+ ' # Ensure predictable behavior from utilities with locale-dependent output. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # We cannot yet rely on "unset" to work, but we need these variables # to be unset--not just set to an empty or harmless value--now, to # avoid bugs in old shells (e.g. pre-3.0 UWIN ksh). This construct # also avoids known problems related to "unset" and subshell syntax # in other old shells (e.g. bash 2.01 and pdksh 5.2.14). for as_var in BASH_ENV ENV MAIL MAILPATH CDPATH do eval test \${$as_var+y} \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done # Ensure that fds 0, 1, and 2 are open. if (exec 3>&0) 2>/dev/null; then :; else exec 0&1) 2>/dev/null; then :; else exec 1>/dev/null; fi if (exec 3>&2) ; then :; else exec 2>/dev/null; fi # The user is always right. if ${PATH_SEPARATOR+false} :; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac test -r "$as_dir$0" && as_myself=$as_dir$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then printf "%s\n" "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Use a proper internal environment variable to ensure we don't fall # into an infinite loop, continuously re-executing ourselves. if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then _as_can_reexec=no; export _as_can_reexec; # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 fi # We don't want this to propagate to other subprocesses. { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="as_nop=: if test \${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1 then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else \$as_nop case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi " as_required="as_fn_return () { (exit \$1); } as_fn_success () { as_fn_return 0; } as_fn_failure () { as_fn_return 1; } as_fn_ret_success () { return 0; } as_fn_ret_failure () { return 1; } exitcode=0 as_fn_success || { exitcode=1; echo as_fn_success failed.; } as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } if ( set x; as_fn_ret_success y && test x = \"\$1\" ) then : else \$as_nop exitcode=1; echo positional parameters were not saved. fi test x\$exitcode = x0 || exit 1 blah=\$(echo \$(echo blah)) test x\"\$blah\" = xblah || exit 1 test -x / || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1" if (eval "$as_required") 2>/dev/null then : as_have_required=yes else $as_nop as_have_required=no fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null then : else $as_nop as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac as_found=: case $as_dir in #( /*) for as_base in sh bash ksh sh5; do # Try only shells that exist, to save several forks. as_shell=$as_dir$as_base if { test -f "$as_shell" || test -f "$as_shell.exe"; } && as_run=a "$as_shell" -c "$as_bourne_compatible""$as_required" 2>/dev/null then : CONFIG_SHELL=$as_shell as_have_required=yes if as_run=a "$as_shell" -c "$as_bourne_compatible""$as_suggested" 2>/dev/null then : break 2 fi fi done;; esac as_found=false done IFS=$as_save_IFS if $as_found then : else $as_nop if { test -f "$SHELL" || test -f "$SHELL.exe"; } && as_run=a "$SHELL" -c "$as_bourne_compatible""$as_required" 2>/dev/null then : CONFIG_SHELL=$SHELL as_have_required=yes fi fi if test "x$CONFIG_SHELL" != x then : export CONFIG_SHELL # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 fi if test x$as_have_required = xno then : printf "%s\n" "$0: This script requires a shell more modern than all" printf "%s\n" "$0: the shells that I found on your system." if test ${ZSH_VERSION+y} ; then printf "%s\n" "$0: In particular, zsh $ZSH_VERSION has bugs and should" printf "%s\n" "$0: be upgraded to zsh 4.3.4 or later." else printf "%s\n" "$0: Please tell bug-autoconf@gnu.org and $0: https://github.com/elmar/aptitude-robot/issues about $0: your system, including any error possibly output before $0: this message. Then install a modern shell, or manually $0: run the script under such a shell if you do have one." fi exit 1 fi fi fi SHELL=${CONFIG_SHELL-/bin/sh} export SHELL # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS ## --------------------- ## ## M4sh Shell Functions. ## ## --------------------- ## # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_nop # --------- # Do nothing but, unlike ":", preserve the value of $?. as_fn_nop () { return $? } as_nop=as_fn_nop # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`printf "%s\n" "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || printf "%s\n" X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null then : eval 'as_fn_append () { eval $1+=\$2 }' else $as_nop as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null then : eval 'as_fn_arith () { as_val=$(( $* )) }' else $as_nop as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith # as_fn_nop # --------- # Do nothing but, unlike ":", preserve the value of $?. as_fn_nop () { return $? } as_nop=as_fn_nop # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi printf "%s\n" "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || printf "%s\n" X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_lineno_1=$LINENO as_lineno_1a=$LINENO as_lineno_2=$LINENO as_lineno_2a=$LINENO eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { printf "%s\n" "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # If we had to re-execute with $CONFIG_SHELL, we're ensured to have # already done that, so ensure we don't try to do so again and fall # in an infinite loop. This has already happened in practice. _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } # Determine whether it's possible to make 'echo' print without a newline. # These variables are no longer used directly by Autoconf, but are AC_SUBSTed # for compatibility with existing Makefiles. ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac # For backward compatibility with old third-party macros, we provide # the shell variables $as_echo and $as_echo_n. New code should use # AS_ECHO(["message"]) and AS_ECHO_N(["message"]), respectively. as_echo='printf %s\n' as_echo_n='printf %s' rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= # Identity of this package. PACKAGE_NAME='Aptitude Robot' PACKAGE_TARNAME='aptitude-robot' PACKAGE_VERSION='1.5.5' PACKAGE_STRING='Aptitude Robot 1.5.5' PACKAGE_BUGREPORT='https://github.com/elmar/aptitude-robot/issues' PACKAGE_URL='https://github.com/elmar/aptitude-robot' ac_subst_vars='LTLIBOBJS LIBOBJS AM_BACKSLASH AM_DEFAULT_VERBOSITY AM_DEFAULT_V AM_V CSCOPE ETAGS CTAGS am__untar am__tar AMTAR am__leading_dot SET_MAKE AWK mkdir_p MKDIR_P INSTALL_STRIP_PROGRAM STRIP install_sh MAKEINFO AUTOHEADER AUTOMAKE AUTOCONF ACLOCAL VERSION PACKAGE CYGPATH_W am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir runstatedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking enable_silent_rules ' ac_precious_vars='build_alias host_alias target_alias' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' runstatedir='${localstatedir}/run' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *=) ac_optarg= ;; *) ac_optarg=yes ;; esac case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: \`$ac_useropt'" ac_useropt_orig=$ac_useropt ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: \`$ac_useropt'" ac_useropt_orig=$ac_useropt ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -runstatedir | --runstatedir | --runstatedi | --runstated \ | --runstate | --runstat | --runsta | --runst | --runs \ | --run | --ru | --r) ac_prev=runstatedir ;; -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \ | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \ | --run=* | --ru=* | --r=*) runstatedir=$ac_optarg ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: \`$ac_useropt'" ac_useropt_orig=$ac_useropt ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: \`$ac_useropt'" ac_useropt_orig=$ac_useropt ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) as_fn_error $? "unrecognized option: \`$ac_option' Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. printf "%s\n" "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && printf "%s\n" "$as_me: WARNING: invalid host type: $ac_option" >&2 : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) printf "%s\n" "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir runstatedir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || printf "%s\n" X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures Aptitude Robot 1.5.5 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/aptitude-robot] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of Aptitude Robot 1.5.5:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-silent-rules less verbose build output (undo: "make V=1") --disable-silent-rules verbose build output (undo: "make V=0") Report bugs to . Aptitude Robot home page: . _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`printf "%s\n" "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`printf "%s\n" "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for configure.gnu first; this name is used for a wrapper for # Metaconfig's "Configure" on case-insensitive file systems. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else printf "%s\n" "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF Aptitude Robot configure 1.5.5 generated by GNU Autoconf 2.71 Copyright (C) 2021 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## ac_configure_args_raw= for ac_arg do case $ac_arg in *\'*) ac_arg=`printf "%s\n" "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append ac_configure_args_raw " '$ac_arg'" done case $ac_configure_args_raw in *$as_nl*) ac_safe_unquote= ;; *) ac_unsafe_z='|&;<>()$`\\"*?[ '' ' # This string ends in space, tab. ac_unsafe_a="$ac_unsafe_z#~" ac_safe_unquote="s/ '\\([^$ac_unsafe_a][^$ac_unsafe_z]*\\)'/ \\1/g" ac_configure_args_raw=` printf "%s\n" "$ac_configure_args_raw" | sed "$ac_safe_unquote"`;; esac cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by Aptitude Robot $as_me 1.5.5, which was generated by GNU Autoconf 2.71. Invocation command line was $ $0$ac_configure_args_raw _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac printf "%s\n" "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`printf "%s\n" "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done { ac_configure_args0=; unset ac_configure_args0;} { ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Sanitize IFS. IFS=" "" $as_nl" # Save into config.log some information that might help in debugging. { echo printf "%s\n" "## ---------------- ## ## Cache variables. ## ## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 printf "%s\n" "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo printf "%s\n" "## ----------------- ## ## Output variables. ## ## ----------------- ##" echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`printf "%s\n" "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac printf "%s\n" "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then printf "%s\n" "## ------------------- ## ## File substitutions. ## ## ------------------- ##" echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`printf "%s\n" "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac printf "%s\n" "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then printf "%s\n" "## ----------- ## ## confdefs.h. ## ## ----------- ##" echo cat confdefs.h echo fi test "$ac_signal" != 0 && printf "%s\n" "$as_me: caught signal $ac_signal" printf "%s\n" "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h printf "%s\n" "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. printf "%s\n" "#define PACKAGE_NAME \"$PACKAGE_NAME\"" >>confdefs.h printf "%s\n" "#define PACKAGE_TARNAME \"$PACKAGE_TARNAME\"" >>confdefs.h printf "%s\n" "#define PACKAGE_VERSION \"$PACKAGE_VERSION\"" >>confdefs.h printf "%s\n" "#define PACKAGE_STRING \"$PACKAGE_STRING\"" >>confdefs.h printf "%s\n" "#define PACKAGE_BUGREPORT \"$PACKAGE_BUGREPORT\"" >>confdefs.h printf "%s\n" "#define PACKAGE_URL \"$PACKAGE_URL\"" >>confdefs.h # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. if test -n "$CONFIG_SITE"; then ac_site_files="$CONFIG_SITE" elif test "x$prefix" != xNONE; then ac_site_files="$prefix/share/config.site $prefix/etc/config.site" else ac_site_files="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi for ac_site_file in $ac_site_files do case $ac_site_file in #( */*) : ;; #( *) : ac_site_file=./$ac_site_file ;; esac if test -f "$ac_site_file" && test -r "$ac_site_file"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 printf "%s\n" "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" \ || { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "failed to load site script $ac_site_file See \`config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special files # actually), so we avoid doing that. DJGPP emulates it as a regular file. if test /dev/null != "$cache_file" && test -f "$cache_file"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 printf "%s\n" "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 printf "%s\n" "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Auxiliary files required by this configure script. ac_aux_files="missing install-sh" # Locations in which to look for auxiliary files. ac_aux_dir_candidates="${srcdir}/build-aux" # Search for a directory containing all of the required auxiliary files, # $ac_aux_files, from the $PATH-style list $ac_aux_dir_candidates. # If we don't find one directory that contains all the files we need, # we report the set of missing files from the *first* directory in # $ac_aux_dir_candidates and give up. ac_missing_aux_files="" ac_first_candidate=: printf "%s\n" "$as_me:${as_lineno-$LINENO}: looking for aux files: $ac_aux_files" >&5 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in $ac_aux_dir_candidates do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac as_found=: printf "%s\n" "$as_me:${as_lineno-$LINENO}: trying $as_dir" >&5 ac_aux_dir_found=yes ac_install_sh= for ac_aux in $ac_aux_files do # As a special case, if "install-sh" is required, that requirement # can be satisfied by any of "install-sh", "install.sh", or "shtool", # and $ac_install_sh is set appropriately for whichever one is found. if test x"$ac_aux" = x"install-sh" then if test -f "${as_dir}install-sh"; then printf "%s\n" "$as_me:${as_lineno-$LINENO}: ${as_dir}install-sh found" >&5 ac_install_sh="${as_dir}install-sh -c" elif test -f "${as_dir}install.sh"; then printf "%s\n" "$as_me:${as_lineno-$LINENO}: ${as_dir}install.sh found" >&5 ac_install_sh="${as_dir}install.sh -c" elif test -f "${as_dir}shtool"; then printf "%s\n" "$as_me:${as_lineno-$LINENO}: ${as_dir}shtool found" >&5 ac_install_sh="${as_dir}shtool install -c" else ac_aux_dir_found=no if $ac_first_candidate; then ac_missing_aux_files="${ac_missing_aux_files} install-sh" else break fi fi else if test -f "${as_dir}${ac_aux}"; then printf "%s\n" "$as_me:${as_lineno-$LINENO}: ${as_dir}${ac_aux} found" >&5 else ac_aux_dir_found=no if $ac_first_candidate; then ac_missing_aux_files="${ac_missing_aux_files} ${ac_aux}" else break fi fi fi done if test "$ac_aux_dir_found" = yes; then ac_aux_dir="$as_dir" break fi ac_first_candidate=false as_found=false done IFS=$as_save_IFS if $as_found then : else $as_nop as_fn_error $? "cannot find required auxiliary files:$ac_missing_aux_files" "$LINENO" 5 fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. if test -f "${ac_aux_dir}config.guess"; then ac_config_guess="$SHELL ${ac_aux_dir}config.guess" fi if test -f "${ac_aux_dir}config.sub"; then ac_config_sub="$SHELL ${ac_aux_dir}config.sub" fi if test -f "$ac_aux_dir/configure"; then ac_configure="$SHELL ${ac_aux_dir}configure" fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 printf "%s\n" "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 printf "%s\n" "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 printf "%s\n" "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 printf "%s\n" "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 printf "%s\n" "$as_me: former value: \`$ac_old_val'" >&2;} { printf "%s\n" "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 printf "%s\n" "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`printf "%s\n" "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 printf "%s\n" "$as_me: error: changes in the environment can compromise the build" >&2;} as_fn_error $? "run \`${MAKE-make} distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## ## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu am__api_version='1.16' # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 printf %s "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if test ${ac_cv_path_install+y} then : printf %s "(cached) " >&6 else $as_nop as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac # Account for fact that we put trailing slashes in our PATH walk. case $as_dir in #(( ./ | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir/" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test ${ac_cv_path_install+y}; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 printf "%s\n" "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 printf %s "checking whether build environment is sane... " >&6; } # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". as_fn_error $? "ls -t appears to fail. Make sure there is not a broken alias in your environment" "$LINENO" 5 fi if test "$2" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$2" = conftest.file ) then # Ok. : else as_fn_error $? "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5 printf "%s\n" "yes" >&6; } # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi rm -f conftest.file test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`printf "%s\n" "$program_transform_name" | sed "$ac_script"` # Expand $ac_aux_dir to an absolute path. am_aux_dir=`cd "$ac_aux_dir" && pwd` if test x"${MISSING+set}" != xset; then MISSING="\${SHELL} '$am_aux_dir/missing'" fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 printf "%s\n" "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 printf %s "checking for $ac_word... " >&6; } if test ${ac_cv_prog_STRIP+y} then : printf %s "(cached) " >&6 else $as_nop if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 printf "%s\n" "$STRIP" >&6; } else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 printf %s "checking for $ac_word... " >&6; } if test ${ac_cv_prog_ac_ct_STRIP+y} then : printf %s "(cached) " >&6 else $as_nop if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 printf "%s\n" "$ac_ct_STRIP" >&6; } else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for a race-free mkdir -p" >&5 printf %s "checking for a race-free mkdir -p... " >&6; } if test -z "$MKDIR_P"; then if test ${ac_cv_path_mkdir+y} then : printf %s "(cached) " >&6 else $as_nop as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do as_fn_executable_p "$as_dir$ac_prog$ac_exec_ext" || continue case `"$as_dir$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir ('*'coreutils) '* | \ 'BusyBox '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir$ac_prog$ac_exec_ext break 3;; esac done done done IFS=$as_save_IFS fi test -d ./--version && rmdir ./--version if test ${ac_cv_path_mkdir+y}; then MKDIR_P="$ac_cv_path_mkdir -p" else # As a last resort, use the slow shell script. Don't cache a # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. MKDIR_P="$ac_install_sh -d" fi fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 printf "%s\n" "$MKDIR_P" >&6; } for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 printf %s "checking for $ac_word... " >&6; } if test ${ac_cv_prog_AWK+y} then : printf %s "(cached) " >&6 else $as_nop if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then ac_cv_prog_AWK="$ac_prog" printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 printf "%s\n" "$AWK" >&6; } else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } fi test -n "$AWK" && break done { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 printf %s "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`printf "%s\n" "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if eval test \${ac_cv_prog_make_${ac_make}_set+y} then : printf %s "(cached) " >&6 else $as_nop cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering ...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5 printf "%s\n" "yes" >&6; } SET_MAKE= else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null # Check whether --enable-silent-rules was given. if test ${enable_silent_rules+y} then : enableval=$enable_silent_rules; fi case $enable_silent_rules in # ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=1;; esac am_make=${MAKE-make} { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 printf %s "checking whether $am_make supports nested variables... " >&6; } if test ${am_cv_make_support_nested_variables+y} then : printf %s "(cached) " >&6 else $as_nop if printf "%s\n" 'TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 printf "%s\n" "$am_cv_make_support_nested_variables" >&6; } if test $am_cv_make_support_nested_variables = yes; then AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AM_BACKSLASH='\' if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE='aptitude-robot' VERSION='1.5.5' printf "%s\n" "#define PACKAGE \"$PACKAGE\"" >>confdefs.h printf "%s\n" "#define VERSION \"$VERSION\"" >>confdefs.h # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # mkdir_p='$(MKDIR_P)' # We need awk for the "check" target (and possibly the TAP driver). The # system "awk" is bad on some platforms. # Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AMTAR='$${TAR-tar}' # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar pax cpio none' am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' # Variables for tags utilities; see am/tags.am if test -z "$CTAGS"; then CTAGS=ctags fi if test -z "$ETAGS"; then ETAGS=etags fi if test -z "$CSCOPE"; then CSCOPE=cscope fi # POSIX will say in a future version that running "rm -f" with no argument # is OK; and we want to be able to make that assumption in our Makefile # recipes. So use an aggressive probe to check that the usage we want is # actually supported "in the wild" to an acceptable degree. # See automake bug#10828. # To make any issue more visible, cause the running configure to be aborted # by default if the 'rm' program in use doesn't match our expectations; the # user can still override this though. if rm -f && rm -fr && rm -rf; then : OK; else cat >&2 <<'END' Oops! Your 'rm' program seems unable to run without file operands specified on the command line, even when the '-f' option is present. This is contrary to the behaviour of most rm programs out there, and not conforming with the upcoming POSIX standard: Please tell bug-automake@gnu.org about your system, including the value of your $PATH and any error possibly output before this message. This can help us improve future automake versions. END if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then echo 'Configuration will proceed anyway, since you have set the' >&2 echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 echo >&2 else cat >&2 <<'END' Aborting the configuration process, to ensure you take notice of the issue. You can download and install GNU coreutils to get an 'rm' implementation that behaves properly: . If you want to complete the configuration process using your problematic 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM to "yes", and re-run configure. END as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 fi fi ac_config_files="$ac_config_files Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 printf "%s\n" "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test ${\1+y} || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then if test "x$cache_file" != "x/dev/null"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 printf "%s\n" "$as_me: updating cache $cache_file" >&6;} if test ! -f "$cache_file" || test -h "$cache_file"; then cat confcache >"$cache_file" else case $cache_file in #( */* | ?:*) mv -f confcache "$cache_file"$$ && mv -f "$cache_file"$$ "$cache_file" ;; #( *) mv -f confcache "$cache_file" ;; esac fi fi else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 printf "%s\n" "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' # Transform confdefs.h into DEFS. # Protect against shell expansion while executing Makefile rules. # Protect against Makefile macro expansion. # # If the first sed substitution is executed (which looks for macros that # take arguments), then branch to the quote section. Otherwise, # look for a macro that doesn't take arguments. ac_script=' :mline /\\$/{ N s,\\\n,, b mline } t clear :clear s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g t quote s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g t quote b any :quote s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g s/\[/\\&/g s/\]/\\&/g s/\$/$$/g H :any ${ g s/^\n// s/\n/ /g p } ' DEFS=`sed -n "$ac_script" confdefs.h` ac_libobjs= ac_ltlibobjs= U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`printf "%s\n" "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 printf %s "checking that generated files are newer than configure... " >&6; } if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: done" >&5 printf "%s\n" "done" >&6; } : "${CONFIG_STATUS=./config.status}" ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { printf "%s\n" "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 printf "%s\n" "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh as_nop=: if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1 then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else $as_nop case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi # Reset variables that may have inherited troublesome values from # the environment. # IFS needs to be set, to space, tab, and newline, in precisely that order. # (If _AS_PATH_WALK were called with IFS unset, it would have the # side effect of setting IFS to empty, thus disabling word splitting.) # Quoting is to prevent editors from complaining about space-tab. as_nl=' ' export as_nl IFS=" "" $as_nl" PS1='$ ' PS2='> ' PS4='+ ' # Ensure predictable behavior from utilities with locale-dependent output. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # We cannot yet rely on "unset" to work, but we need these variables # to be unset--not just set to an empty or harmless value--now, to # avoid bugs in old shells (e.g. pre-3.0 UWIN ksh). This construct # also avoids known problems related to "unset" and subshell syntax # in other old shells (e.g. bash 2.01 and pdksh 5.2.14). for as_var in BASH_ENV ENV MAIL MAILPATH CDPATH do eval test \${$as_var+y} \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done # Ensure that fds 0, 1, and 2 are open. if (exec 3>&0) 2>/dev/null; then :; else exec 0&1) 2>/dev/null; then :; else exec 1>/dev/null; fi if (exec 3>&2) ; then :; else exec 2>/dev/null; fi # The user is always right. if ${PATH_SEPARATOR+false} :; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac test -r "$as_dir$0" && as_myself=$as_dir$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then printf "%s\n" "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi printf "%s\n" "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null then : eval 'as_fn_append () { eval $1+=\$2 }' else $as_nop as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null then : eval 'as_fn_arith () { as_val=$(( $* )) }' else $as_nop as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || printf "%s\n" X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # Determine whether it's possible to make 'echo' print without a newline. # These variables are no longer used directly by Autoconf, but are AC_SUBSTed # for compatibility with existing Makefiles. ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac # For backward compatibility with old third-party macros, we provide # the shell variables $as_echo and $as_echo_n. New code should use # AS_ECHO(["message"]) and AS_ECHO_N(["message"]), respectively. as_echo='printf %s\n' as_echo_n='printf %s' rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`printf "%s\n" "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || printf "%s\n" X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## _ASEOF test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by Aptitude Robot $as_me 1.5.5, which was generated by GNU Autoconf 2.71. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE Configuration files: $config_files Report bugs to . Aptitude Robot home page: ." _ACEOF ac_cs_config=`printf "%s\n" "$ac_configure_args" | sed "$ac_safe_unquote"` ac_cs_config_escaped=`printf "%s\n" "$ac_cs_config" | sed "s/^ //; s/'/'\\\\\\\\''/g"` cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config='$ac_cs_config_escaped' ac_cs_version="\\ Aptitude Robot config.status 1.5.5 configured by $0, generated by GNU Autoconf 2.71, with options \\"\$ac_cs_config\\" Copyright (C) 2021 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; --*=) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg= ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) printf "%s\n" "$ac_cs_version"; exit ;; --config | --confi | --conf | --con | --co | --c ) printf "%s\n" "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`printf "%s\n" "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --he | --h | --help | --hel | -h ) printf "%s\n" "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error $? "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \printf "%s\n" "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX printf "%s\n" "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test ${CONFIG_FILES+y} || CONFIG_FILES=$config_files fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= ac_tmp= trap 'exit_status=$? : "${ac_tmp:=$tmp}" { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 ac_tmp=$tmp # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$ac_tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove sole $(srcdir), # ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ h s/// s/^/:/ s/[ ]*$/:/ s/:\$(srcdir):/:/g s/:\${srcdir}:/:/g s/:@srcdir@:/:/g s/^:*// s/:*$// x s/\(=[ ]*\).*/\1/ G s/\n// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" eval set X " :F $CONFIG_FILES " shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`printf "%s\n" "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` printf "%s\n" "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { printf "%s\n" "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 printf "%s\n" "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`printf "%s\n" "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$ac_tmp/stdin" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || printf "%s\n" X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`printf "%s\n" "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`printf "%s\n" "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 printf "%s\n" "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ "$ac_tmp/out"`; test -z "$ac_out"; } && { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&5 printf "%s\n" "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&2;} rm -f "$ac_tmp/stdin" case $ac_file in -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; esac \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac done # for ac_tag as_fn_exit 0 _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit 1 fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 printf "%s\n" "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi aptitude-robot-1.5.5/aptitude-robot-session.pod0000644000175000017500000000434213203347371016542 00000000000000=head1 NAME aptitude-robot-session - call aptitude-robot non-interactively =head1 SYNOPSIS aptitude-robot-session =head1 DESCRIPTION aptitude-robot-session is a helper script meant to be run from cron or init scripts. It will call aptitude-robot with some options suitable for non-interactive use. It will also redirect all output (STDERR and STDOUT) to LOGFILE defined in C. =head1 CONFIGURATION There are a few configuration options that can be defined in C. =over =item LOGFILE the name of the file where all the output of aptitude-robot is collected. Defaults to C =item LOG_SESSION the name of the file where the session log is accumulated. aptitude-robot-session will append its PID to this file in order not to overwrite a log file left over from a crashed earlier invocation. If aptitude-robot-session finishes properly it will append the session log to LOGFILE and delete the session log. =item SESSION_REPORT_COMMAND optional command invoked with the session log as the only argument at the end of an aptitude-robot-session run. This can be used to file reports to monitoring systems or support mail addresses. =item MAX_LOGFILES_SIZE_BLOCKS file size limit in blocks for the session log. This prevents endless loops if a package installation continues to ask the same question for which no terminal is available to provide an answer. But be aware that this limit also affects _all_ daemons started or restarted during the aptitude-robot-session run, including e.g. the OpenSSH daemon which again will propagate the limit to its remote login sessions. Use with care. =item POST_SESSION_HOOK a command that is run at the end of a successful aptitude-robot-session. E.g., use it for apt-get clean. =back =head1 EXIT STATUS aptitude-robot-session exits with 0 on success, 1 if dpkg is locked, 2 if apt failed to fetch some APT repositories. =head1 BUGS The non-interactive nature of aptitude-robot-session may trigger the condition reported in https://bugs.launchpad.net/ubuntu/+source/aptitude/+bug/257279 =head1 SEE ALSO L, L =head1 AUTHORS Elmar S. Heeb and Axel Beckert =cut aptitude-robot-1.5.5/aptitude-robot0000755000175000017500000001627614125113014014301 00000000000000#!/usr/bin/perl # vim: set filetype=perl : use strict; use warnings; use 5.010; use English qw( -no_match_vars ); use Carp; use autodie; use Run::Parts; main() unless caller(0); sub main { use Pod::Usage; use Getopt::Long qw( :config pass_through no_auto_abbrev ); my $help; my $pass_through_options; my $show_cmdline; my $force_install; my $config_dir = '/etc/aptitude-robot'; GetOptions( 'help' => \$help, 'show-cmdline' => \$show_cmdline, 'force-install' => \$force_install, 'config-dir=s' => \$config_dir, ); pod2usage('-verbose' => 2, '-exit_status' => 0) if $help; my $aptitude_robot = Aptitude::Robot::Command->new( config_dir => $config_dir, force_install => $force_install, pass_through_options => \@ARGV, ); die $aptitude_robot->error_msg() . "\n" if $aptitude_robot->error_msg(); _run_triggers("$config_dir/triggers.pre", $show_cmdline); my @command = $aptitude_robot->command(); if ($show_cmdline) { say "'" . join("' '", @command) . "'"; } else { system(@command); if ($CHILD_ERROR == -1) { die "aptitude failed to execute: $OS_ERROR\n"; } elsif ($CHILD_ERROR) { my $exit_code = ($CHILD_ERROR >> 8); printf STDERR "aptitude exited with value %d\n", $exit_code; exit $exit_code; } } _run_triggers("$config_dir/triggers.post", $show_cmdline); } sub _run_triggers { return unless @_; my ($triggers, $show_cmdline) = @_; if ( -d $triggers ) { my $rp = Run::Parts->new($triggers); if ($show_cmdline) { say $rp->test; } else { $rp->run; } } return; } BEGIN{ package Aptitude::Robot::Command; use Moo; has( 'config_dir' => ( is => 'ro', required => 1, ) ); has( 'pass_through_options' => ( is => 'ro', required => 0, ) ); has( 'force_install' => ( is => 'rw', default => sub { return 0; }, ) ); has( 'error_msg' => ( is => 'ro', init_arg => undef, default => sub { my $self = shift; if ( -d $self->config_dir() . '/pkglist.d/.' ) { return ''; } else { return 'Error: ' . $self->config_dir . ' is not a aptitude-robot config directory'; } }, ) ); sub command { my $self = shift; return () if $self->error_msg(); my %pkg_action = (); for my $line ($self->run_parts_lines('pkglist.d')) { my ($action, $pkg) = split(/\s+/, $line, 2); unless (defined($pkg) && $pkg ne '') { warn "Missing package name in line '$line' somewhere under ". $self->config_dir() . "/pkglist.d/. Ignoring this line.\n"; next; } # ignore extra ':' and '=' entries on force-install next if $self->force_install() and defined($pkg_action{$pkg}) and ($action eq ':' or $action eq '='); $pkg_action{$pkg} = $action; } my @cmd = ( 'aptitude' ); push(@cmd, @{$self->pass_through_options()}) if $self->pass_through_options(); push(@cmd, $self->options(), 'full-upgrade', '~U !~ahold' ); for my $pkg (sort keys %pkg_action) { push(@cmd, $pkg . $pkg_action{$pkg}); } return @cmd; } sub options { my $self = shift; return () if $self->error_msg(); return _split_parameters($self->run_parts_lines('options.d')); } sub run_parts_lines { my ($self, $parts_dir) = @_; return () if $self->error_msg(); my $full_path = $self->config_dir() . "/$parts_dir"; return () unless -d $full_path; my $rp = Run::Parts->new($full_path); return _clean_comments_and_whitespace( $rp->concat ); } sub _clean_comments_and_whitespace { my (@lines) = @_; for my $line (@lines) { $line =~ s{\# .* \Z}{}xms; # remove comments $line =~ s{\A \s+}{}xms; # remove leading space $line =~ s{\s+ \Z}{}xms; # remove trailing space } return grep { $_ ne '' } @lines; # non-empty lines only } sub _split_parameters { my (@lines) = @_; my @parameters = (); for my $line (@lines) { push(@parameters, split(qr(=|\s+), $line, 2)); } return @parameters; } no Moo; 1; } __END__ =head1 NAME aptitude-robot - automate package choice management =head1 SYNOPSIS aptitude-robot [options] aptitude-robot --help =head1 DESCRIPTION aptitude-robot uses configuration files to install and remove Debian software packages automatically. This allows hands-off setup and maintenance of workstations and servers. Create package lists in a development environment and copy the package lists over to the production machines. aptitude-robot will then make sure that the packages mentioned in the lists are installed or removed as indicated. =head1 OPTIONS =over 4 =item B<--force-install> give priority to install(+), remove(-), and purge(_) actions over keep(:) and hold(=) =item B<--config-dir F> specify an alternate configuration directory. Defaults to F =item B<--show-cmdline> only show the command that would be executed =item B<--help> Prints this page. =item I any option not recognized by aptitude-robot itself is passed through to aptitude. The options B<-q> and B<-s> are likely to be used occasionally. See L for details. =back =head1 CONFIGURATION The configuration directory given by the C<--config-dir> (or F by default) must contain a directory named F. This directory may have several package list files that are chosen according to the criteria of L. They are concatenated in the order given by L. Each line shall contain an action and a package name separated by white space. The actions are those used by the C command line interface (see aptitude documentation). Typically they are: I<+ package # install package> I<+M package # install package and mark it as automatically installed> I<- package # remove package> I<_ package # purge package> I<: package # keep package at current version> I<= package # mark a package as "hold", i.e., prevent automatic updates> If a package is mentioned several times the last entry will determine the action. If the C<--force-install> option is given the keep(:) and hold(=) actions are given lower priority, i.e., the appear only when no other action for the package is specified. A C<#> character starts a comment extending to the end of line. Empty lines or extra white space at the beginning or end of line is ignored. Optionally the configuration directory may contain a file name F containing extra options given to aptitude in the form of one option per line. Optionally the configuration directory may contain two directories F and F with scripts that are executed by L before and after aptitude respectively. =head1 SEE ALSO L, L =head1 AUTHORS Elmar S. Heeb and Axel Beckert =cut aptitude-robot-1.5.5/xymon-report0000755000175000017500000000245112757426511014032 00000000000000#!/bin/sh COLUMN=upd COLOR=green REPORTING_HELPERS="$(dirname $0)/reporting-helpers" if [ -f "$REPORTING_HELPERS" ]; then . "$REPORTING_HELPERS" else echo "E: $REPORTING_HELPERS helpers not present, bailing out." 1>&2 exit 1; fi # # check for remaining upgrades # REMAINING_UPGRADES="$(remaining_upgrades)" if [ -n "$REMAINING_UPGRADES" ]; then COLOR=red MSG="${MSG}${REMAINING_UPGRADES}" fi # # check for errors in log file # ERRORS_IN_LOGFILE=$(errors_in_logfile "$1") if [ "$ERRORS_IN_LOGFILE" = "notfound" ]; then COLOR=red MSG="${MSG} log file missing -- please investigate " else if [ "$ERRORS_IN_LOGFILE" = "warnings" ]; then COLOR=yellow elif [ "$ERRORS_IN_LOGFILE" = "errors" ]; then COLOR=red fi MSG="${MSG} $(print_logfile_for_xymon "$1") " fi BB=/bin/false if [ -x /usr/lib/hobbit/client/bin/bb ]; then BB=/usr/lib/hobbit/client/bin/bb fi if [ -x /usr/lib/xymon/client/bin/xymon ]; then BB=/usr/lib/xymon/client/bin/xymon fi if [ -f /etc/default/hobbit-client ]; then . /etc/default/hobbit-client fi if [ -f /etc/default/xymon-client ]; then . /etc/default/xymon-client fi for server in $HOBBITSERVERS $XYMONSERVERS; do $BB $server "@" << EOF status+36h $CLIENTHOSTNAME.$COLUMN $COLOR $(date) ${MSG} EOF done exit 0 aptitude-robot-1.5.5/Makefile.in0000644000175000017500000007670214165301201013457 00000000000000# Makefile.in generated by automake 1.16.5 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2021 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ $(am__configure_deps) $(dist_pkgdata_SCRIPTS) \ $(dist_sbin_SCRIPTS) $(dist_triggerspost_SCRIPTS) \ $(dist_options_DATA) $(dist_pkgdata_DATA) $(dist_pkglist_DATA) \ $(dist_triggerspost_DATA) $(dist_triggerspre_DATA) \ $(am__DIST_COMMON) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(sbindir)" \ "$(DESTDIR)$(triggerspostdir)" "$(DESTDIR)$(man8dir)" \ "$(DESTDIR)$(optionsdir)" "$(DESTDIR)$(pkgdatadir)" \ "$(DESTDIR)$(pkglistdir)" "$(DESTDIR)$(triggerspostdir)" \ "$(DESTDIR)$(triggerspredir)" SCRIPTS = $(dist_pkgdata_SCRIPTS) $(dist_sbin_SCRIPTS) \ $(dist_triggerspost_SCRIPTS) AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac man8dir = $(mandir)/man8 NROFF = nroff MANS = $(man_MANS) DATA = $(dist_options_DATA) $(dist_pkgdata_DATA) $(dist_pkglist_DATA) \ $(dist_triggerspost_DATA) $(dist_triggerspre_DATA) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) am__DIST_COMMON = $(srcdir)/Makefile.in \ $(top_srcdir)/build-aux/install-sh \ $(top_srcdir)/build-aux/missing build-aux/install-sh \ build-aux/missing DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best DIST_TARGETS = dist-gzip # Exists only to be overridden by the user if desired. AM_DISTCHECK_DVI_TARGET = dvi distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CSCOPE = @CSCOPE@ CTAGS = @CTAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ ETAGS = @ETAGS@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ am__leading_dot = @am__leading_dot@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ dist_sbin_SCRIPTS = aptitude-robot aptitude-robot-session dist_pkgdata_SCRIPTS = random-delay mail-log-on-error xymon-report dist_pkgdata_DATA = reporting-helpers man_MANS = aptitude-robot.8 aptitude-robot-session.8 pkgconfdir = $(sysconfdir)/aptitude-robot pkglistdir = $(pkgconfdir)/pkglist.d optionsdir = $(pkgconfdir)/options.d triggerspredir = $(pkgconfdir)/triggers.pre triggerspostdir = $(pkgconfdir)/triggers.post dist_options_DATA = etc/aptitude-robot/options.d/10-remove-level-maximum dist_pkglist_DATA = etc/aptitude-robot/pkglist.d/README.txt dist_triggerspre_DATA = etc/aptitude-robot/triggers.pre/README.txt dist_triggerspost_DATA = etc/aptitude-robot/triggers.post/README.txt dist_triggerspost_SCRIPTS = etc/aptitude-robot/triggers.post/90-cleanup.example CLEANFILES = $(man_MANS) EXTRA_DIST = README.mdown TODO.mdown build-all t \ aptitude-robot-session.pod LICENSE CONTRIBUTING.mdown all: all-am .SUFFIXES: am--refresh: Makefile @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): install-dist_pkgdataSCRIPTS: $(dist_pkgdata_SCRIPTS) @$(NORMAL_INSTALL) @list='$(dist_pkgdata_SCRIPTS)'; test -n "$(pkgdatadir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \ $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n' \ -e 'h;s|.*|.|' \ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) { files[d] = files[d] " " $$1; \ if (++n[d] == $(am__install_max)) { \ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ else { print "f", d "/" $$4, $$1 } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(pkgdatadir)$$dir'"; \ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(pkgdatadir)$$dir" || exit $$?; \ } \ ; done uninstall-dist_pkgdataSCRIPTS: @$(NORMAL_UNINSTALL) @list='$(dist_pkgdata_SCRIPTS)'; test -n "$(pkgdatadir)" || exit 0; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 's,.*/,,;$(transform)'`; \ dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir) install-dist_sbinSCRIPTS: $(dist_sbin_SCRIPTS) @$(NORMAL_INSTALL) @list='$(dist_sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \ $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n' \ -e 'h;s|.*|.|' \ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) { files[d] = files[d] " " $$1; \ if (++n[d] == $(am__install_max)) { \ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ else { print "f", d "/" $$4, $$1 } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \ } \ ; done uninstall-dist_sbinSCRIPTS: @$(NORMAL_UNINSTALL) @list='$(dist_sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 's,.*/,,;$(transform)'`; \ dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir) install-dist_triggerspostSCRIPTS: $(dist_triggerspost_SCRIPTS) @$(NORMAL_INSTALL) @list='$(dist_triggerspost_SCRIPTS)'; test -n "$(triggerspostdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(triggerspostdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(triggerspostdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n' \ -e 'h;s|.*|.|' \ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) { files[d] = files[d] " " $$1; \ if (++n[d] == $(am__install_max)) { \ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ else { print "f", d "/" $$4, $$1 } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(triggerspostdir)$$dir'"; \ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(triggerspostdir)$$dir" || exit $$?; \ } \ ; done uninstall-dist_triggerspostSCRIPTS: @$(NORMAL_UNINSTALL) @list='$(dist_triggerspost_SCRIPTS)'; test -n "$(triggerspostdir)" || exit 0; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 's,.*/,,;$(transform)'`; \ dir='$(DESTDIR)$(triggerspostdir)'; $(am__uninstall_files_from_dir) install-man8: $(man_MANS) @$(NORMAL_INSTALL) @list1=''; \ list2='$(man_MANS)'; \ test -n "$(man8dir)" \ && test -n "`echo $$list1$$list2`" \ || exit 0; \ echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \ { for i in $$list1; do echo "$$i"; done; \ if test -n "$$list2"; then \ for i in $$list2; do echo "$$i"; done \ | sed -n '/\.8[a-z]*$$/p'; \ fi; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \ done; } uninstall-man8: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man8dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.8[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir) install-dist_optionsDATA: $(dist_options_DATA) @$(NORMAL_INSTALL) @list='$(dist_options_DATA)'; test -n "$(optionsdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(optionsdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(optionsdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(optionsdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(optionsdir)" || exit $$?; \ done uninstall-dist_optionsDATA: @$(NORMAL_UNINSTALL) @list='$(dist_options_DATA)'; test -n "$(optionsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(optionsdir)'; $(am__uninstall_files_from_dir) install-dist_pkgdataDATA: $(dist_pkgdata_DATA) @$(NORMAL_INSTALL) @list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \ $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \ done uninstall-dist_pkgdataDATA: @$(NORMAL_UNINSTALL) @list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir) install-dist_pkglistDATA: $(dist_pkglist_DATA) @$(NORMAL_INSTALL) @list='$(dist_pkglist_DATA)'; test -n "$(pkglistdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(pkglistdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(pkglistdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkglistdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(pkglistdir)" || exit $$?; \ done uninstall-dist_pkglistDATA: @$(NORMAL_UNINSTALL) @list='$(dist_pkglist_DATA)'; test -n "$(pkglistdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(pkglistdir)'; $(am__uninstall_files_from_dir) install-dist_triggerspostDATA: $(dist_triggerspost_DATA) @$(NORMAL_INSTALL) @list='$(dist_triggerspost_DATA)'; test -n "$(triggerspostdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(triggerspostdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(triggerspostdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(triggerspostdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(triggerspostdir)" || exit $$?; \ done uninstall-dist_triggerspostDATA: @$(NORMAL_UNINSTALL) @list='$(dist_triggerspost_DATA)'; test -n "$(triggerspostdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(triggerspostdir)'; $(am__uninstall_files_from_dir) install-dist_triggerspreDATA: $(dist_triggerspre_DATA) @$(NORMAL_INSTALL) @list='$(dist_triggerspre_DATA)'; test -n "$(triggerspredir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(triggerspredir)'"; \ $(MKDIR_P) "$(DESTDIR)$(triggerspredir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(triggerspredir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(triggerspredir)" || exit $$?; \ done uninstall-dist_triggerspreDATA: @$(NORMAL_UNINSTALL) @list='$(dist_triggerspre_DATA)'; test -n "$(triggerspredir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(triggerspredir)'; $(am__uninstall_files_from_dir) tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am distdir-am: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-zstd: distdir tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst $(am__post_remove_distdir) dist-tarZ: distdir @echo WARNING: "Support for distribution archives compressed with" \ "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir @echo WARNING: "Support for shar distribution archives is" \ "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ *.tar.zst*) \ zstd -dc $(distdir).tar.zst | $(am__untar) ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build/sub \ && ../../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ --srcdir=../.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-local check: check-am all-am: Makefile $(SCRIPTS) $(MANS) $(DATA) installdirs: for dir in "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(triggerspostdir)" "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(optionsdir)" "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(pkglistdir)" "$(DESTDIR)$(triggerspostdir)" "$(DESTDIR)$(triggerspredir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic mostlyclean-am distclean: distclean-am -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dist_optionsDATA install-dist_pkgdataDATA \ install-dist_pkgdataSCRIPTS install-dist_pkglistDATA \ install-dist_triggerspostDATA install-dist_triggerspostSCRIPTS \ install-dist_triggerspreDATA install-man install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-dist_sbinSCRIPTS install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-man8 install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-dist_optionsDATA uninstall-dist_pkgdataDATA \ uninstall-dist_pkgdataSCRIPTS uninstall-dist_pkglistDATA \ uninstall-dist_sbinSCRIPTS uninstall-dist_triggerspostDATA \ uninstall-dist_triggerspostSCRIPTS \ uninstall-dist_triggerspreDATA uninstall-man uninstall-man: uninstall-man8 .MAKE: check-am install-am install-strip .PHONY: all all-am am--refresh check check-am check-local clean \ clean-generic cscopelist-am ctags-am dist dist-all dist-bzip2 \ dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \ dist-zstd distcheck distclean distclean-generic distcleancheck \ distdir distuninstallcheck dvi dvi-am html html-am info \ info-am install install-am install-data install-data-am \ install-dist_optionsDATA install-dist_pkgdataDATA \ install-dist_pkgdataSCRIPTS install-dist_pkglistDATA \ install-dist_sbinSCRIPTS install-dist_triggerspostDATA \ install-dist_triggerspostSCRIPTS install-dist_triggerspreDATA \ install-dvi install-dvi-am install-exec install-exec-am \ install-html install-html-am install-info install-info-am \ install-man install-man8 install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags-am \ uninstall uninstall-am uninstall-dist_optionsDATA \ uninstall-dist_pkgdataDATA uninstall-dist_pkgdataSCRIPTS \ uninstall-dist_pkglistDATA uninstall-dist_sbinSCRIPTS \ uninstall-dist_triggerspostDATA \ uninstall-dist_triggerspostSCRIPTS \ uninstall-dist_triggerspreDATA uninstall-man uninstall-man8 .PRECIOUS: Makefile aptitude-robot.8: aptitude-robot pod2man -s 8 -c 'User Commands' -r "$(VERSION)" $< $@ aptitude-robot-session.8: aptitude-robot-session.pod pod2man -s 8 -c 'User Commands' -r "$(VERSION)" $< $@ check-local: TOPDIR=$(abs_top_srcdir) prove -I$(abs_top_srcdir) $(abs_top_srcdir)/t # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: aptitude-robot-1.5.5/build-aux/0000755000175000017500000000000014165301205013354 500000000000000aptitude-robot-1.5.5/build-aux/install-sh0000755000175000017500000003577614165301201015316 00000000000000#!/bin/sh # install - install a program, script, or datafile scriptversion=2020-11-14.01; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # 'make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. tab=' ' nl=' ' IFS=" $tab$nl" # Set DOITPROG to "echo" to test this script. doit=${DOITPROG-} doit_exec=${doit:-exec} # Put in absolute file names if you don't have them in your path; # or use environment vars. chgrpprog=${CHGRPPROG-chgrp} chmodprog=${CHMODPROG-chmod} chownprog=${CHOWNPROG-chown} cmpprog=${CMPPROG-cmp} cpprog=${CPPROG-cp} mkdirprog=${MKDIRPROG-mkdir} mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} posix_mkdir= # Desired mode of installed file. mode=0755 # Create dirs (including intermediate dirs) using mode 755. # This is like GNU 'install' as of coreutils 8.32 (2020). mkdir_umask=22 backupsuffix= chgrpcmd= chmodcmd=$chmodprog chowncmd= mvcmd=$mvprog rmcmd="$rmprog -f" stripcmd= src= dst= dir_arg= dst_arg= copy_on_change=false is_target_a_directory=possibly usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... In the 1st form, copy SRCFILE to DSTFILE. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: --help display this help and exit. --version display version info and exit. -c (ignored) -C install only if different (preserve data modification time) -d create directories instead of installing files. -g GROUP $chgrpprog installed files to GROUP. -m MODE $chmodprog installed files to MODE. -o USER $chownprog installed files to USER. -p pass -p to $cpprog. -s $stripprog installed files. -S SUFFIX attempt to back up existing files, with suffix SUFFIX. -t DIRECTORY install into DIRECTORY. -T report an error if DSTFILE is a directory. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG By default, rm is invoked with -f; when overridden with RMPROG, it's up to you to specify -f if you want it. If -S is not specified, no backups are attempted. Email bug reports to bug-automake@gnu.org. Automake home page: https://www.gnu.org/software/automake/ " while test $# -ne 0; do case $1 in -c) ;; -C) copy_on_change=true;; -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 case $mode in *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*) echo "$0: invalid mode: $mode" >&2 exit 1;; esac shift;; -o) chowncmd="$chownprog $2" shift;; -p) cpprog="$cpprog -p";; -s) stripcmd=$stripprog;; -S) backupsuffix="$2" shift;; -t) is_target_a_directory=always dst_arg=$2 # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac shift;; -T) is_target_a_directory=never;; --version) echo "$0 $scriptversion"; exit $?;; --) shift break;; -*) echo "$0: invalid option: $1" >&2 exit 1;; *) break;; esac shift done # We allow the use of options -d and -T together, by making -d # take the precedence; this is for compatibility with GNU install. if test -n "$dir_arg"; then if test -n "$dst_arg"; then echo "$0: target directory not allowed when installing a directory." >&2 exit 1 fi fi if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dst_arg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dst_arg" shift # fnord fi shift # arg dst_arg=$arg # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac done fi if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call 'install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then if test $# -gt 1 || test "$is_target_a_directory" = always; then if test ! -d "$dst_arg"; then echo "$0: $dst_arg: Is not a directory." >&2 exit 1 fi fi fi if test -z "$dir_arg"; then do_exit='(exit $ret); exit $ret' trap "ret=129; $do_exit" 1 trap "ret=130; $do_exit" 2 trap "ret=141; $do_exit" 13 trap "ret=143; $do_exit" 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. case $mode in # Optimize common cases. *644) cp_umask=133;; *755) cp_umask=22;; *[0-7]) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac fi for src do # Protect names problematic for 'test' and other utilities. case $src in -* | [=\(\)!]) src=./$src;; esac if test -n "$dir_arg"; then dst=$src dstdir=$dst test -d "$dstdir" dstdir_status=$? # Don't chown directories that already exist. if test $dstdir_status = 0; then chowncmd="" fi else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dst_arg # If destination is a directory, append the input filename. if test -d "$dst"; then if test "$is_target_a_directory" = never; then echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi dstdir=$dst dstbase=`basename "$src"` case $dst in */) dst=$dst$dstbase;; *) dst=$dst/$dstbase;; esac dstdir_status=0 else dstdir=`dirname "$dst"` test -d "$dstdir" dstdir_status=$? fi fi case $dstdir in */) dstdirslash=$dstdir;; *) dstdirslash=$dstdir/;; esac obsolete_mkdir_used=false if test $dstdir_status != 0; then case $posix_mkdir in '') # With -d, create the new directory with the user-specified mode. # Otherwise, rely on $mkdir_umask. if test -n "$dir_arg"; then mkdir_mode=-m$mode else mkdir_mode= fi posix_mkdir=false # The $RANDOM variable is not portable (e.g., dash). Use it # here however when possible just to lower collision chance. tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ trap ' ret=$? rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null exit $ret ' 0 # Because "mkdir -p" follows existing symlinks and we likely work # directly in world-writeable /tmp, make sure that the '$tmpdir' # directory is successfully created first before we actually test # 'mkdir -p'. if (umask $mkdir_umask && $mkdirprog $mkdir_mode "$tmpdir" && exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1 then if test -z "$dir_arg" || { # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. test_tmpdir="$tmpdir/a" ls_ld_tmpdir=`ls -ld "$test_tmpdir"` case $ls_ld_tmpdir in d????-?r-*) different_mode=700;; d????-?--*) different_mode=755;; *) false;; esac && $mkdirprog -m$different_mode -p -- "$test_tmpdir" && { ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"` test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" } } then posix_mkdir=: fi rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" else # Remove any dirs left behind by ancient mkdir implementations. rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null fi trap '' 0;; esac if $posix_mkdir && ( umask $mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else # mkdir does not conform to POSIX, # or it failed possibly due to a race condition. Create the # directory the slow way, step by step, checking for races as we go. case $dstdir in /*) prefix='/';; [-=\(\)!]*) prefix='./';; *) prefix='';; esac oIFS=$IFS IFS=/ set -f set fnord $dstdir shift set +f IFS=$oIFS prefixes= for d do test X"$d" = X && continue prefix=$prefix$d if test -d "$prefix"; then prefixes= else if $posix_mkdir; then (umask $mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break # Don't fail if two instances are running concurrently. test -d "$prefix" || exit 1 else case $prefix in *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; *) qprefix=$prefix;; esac prefixes="$prefixes '$qprefix'" fi fi prefix=$prefix/ done if test -n "$prefixes"; then # Don't fail if two instances are running concurrently. (umask $mkdir_umask && eval "\$doit_exec \$mkdirprog $prefixes") || test -d "$dstdir" || exit 1 obsolete_mkdir_used=true fi fi fi if test -n "$dir_arg"; then { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else # Make a couple of temp file names in the proper directory. dsttmp=${dstdirslash}_inst.$$_ rmtmp=${dstdirslash}_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. (umask $cp_umask && { test -z "$stripcmd" || { # Create $dsttmp read-write so that cp doesn't create it read-only, # which would cause strip to fail. if test -z "$doit"; then : >"$dsttmp" # No need to fork-exec 'touch'. else $doit touch "$dsttmp" fi } } && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then rm -f "$dsttmp" else # If $backupsuffix is set, and the file being installed # already exists, attempt a backup. Don't worry if it fails, # e.g., if mv doesn't support -f. if test -n "$backupsuffix" && test -f "$dst"; then $doit $mvcmd -f "$dst" "$dst$backupsuffix" 2>/dev/null fi # Rename the file to the real destination. $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. { # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { test ! -f "$dst" || $doit $rmcmd "$dst" 2>/dev/null || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && { $doit $rmcmd "$rmtmp" 2>/dev/null; :; } } || { echo "$0: cannot unlink or rename $dst" >&2 (exit 1); exit 1 } } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 trap '' 0 fi done # Local variables: # eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: aptitude-robot-1.5.5/build-aux/missing0000755000175000017500000001533614165301201014677 00000000000000#! /bin/sh # Common wrapper for a few potentially missing GNU programs. scriptversion=2018-03-07.03; # UTC # Copyright (C) 1996-2021 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try '$0 --help' for more information" exit 1 fi case $1 in --is-lightweight) # Used by our autoconf macros to check whether the available missing # script is modern enough. exit 0 ;; --run) # Back-compat with the calling convention used by older automake. shift ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit Supported PROGRAM values: aclocal autoconf autoheader autom4te automake makeinfo bison yacc flex lex help2man Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and 'g' are ignored when checking the name. Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: unknown '$1' option" echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac # Run the given program, remember its exit status. "$@"; st=$? # If it succeeded, we are done. test $st -eq 0 && exit 0 # Also exit now if we it failed (or wasn't found), and '--version' was # passed; such an option is passed most likely to detect whether the # program is present and works. case $2 in --version|--help) exit $st;; esac # Exit code 63 means version mismatch. This often happens when the user # tries to use an ancient version of a tool on a file that requires a # minimum version. if test $st -eq 63; then msg="probably too old" elif test $st -eq 127; then # Program was missing. msg="missing on your system" else # Program was found and executed, but failed. Give up. exit $st fi perl_URL=https://www.perl.org/ flex_URL=https://github.com/westes/flex gnu_software_URL=https://www.gnu.org/software program_details () { case $1 in aclocal|automake) echo "The '$1' program is part of the GNU Automake package:" echo "<$gnu_software_URL/automake>" echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/autoconf>" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; autoconf|autom4te|autoheader) echo "The '$1' program is part of the GNU Autoconf package:" echo "<$gnu_software_URL/autoconf/>" echo "It also requires GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; esac } give_advice () { # Normalize program name to check for. normalized_program=`echo "$1" | sed ' s/^gnu-//; t s/^gnu//; t s/^g//; t'` printf '%s\n' "'$1' is $msg." configure_deps="'configure.ac' or m4 files included by 'configure.ac'" case $normalized_program in autoconf*) echo "You should only need it if you modified 'configure.ac'," echo "or m4 files included by it." program_details 'autoconf' ;; autoheader*) echo "You should only need it if you modified 'acconfig.h' or" echo "$configure_deps." program_details 'autoheader' ;; automake*) echo "You should only need it if you modified 'Makefile.am' or" echo "$configure_deps." program_details 'automake' ;; aclocal*) echo "You should only need it if you modified 'acinclude.m4' or" echo "$configure_deps." program_details 'aclocal' ;; autom4te*) echo "You might have modified some maintainer files that require" echo "the 'autom4te' program to be rebuilt." program_details 'autom4te' ;; bison*|yacc*) echo "You should only need it if you modified a '.y' file." echo "You may want to install the GNU Bison package:" echo "<$gnu_software_URL/bison/>" ;; lex*|flex*) echo "You should only need it if you modified a '.l' file." echo "You may want to install the Fast Lexical Analyzer package:" echo "<$flex_URL>" ;; help2man*) echo "You should only need it if you modified a dependency" \ "of a man page." echo "You may want to install the GNU Help2man package:" echo "<$gnu_software_URL/help2man/>" ;; makeinfo*) echo "You should only need it if you modified a '.texi' file, or" echo "any other file indirectly affecting the aspect of the manual." echo "You might want to install the Texinfo package:" echo "<$gnu_software_URL/texinfo/>" echo "The spurious makeinfo call might also be the consequence of" echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" echo "want to install GNU make:" echo "<$gnu_software_URL/make/>" ;; *) echo "You might have modified some files without having the proper" echo "tools for further handling them. Check the 'README' file, it" echo "often tells you about the needed prerequisites for installing" echo "this package. You may also peek at any GNU archive site, in" echo "case some other package contains this missing '$1' program." ;; esac } give_advice "$1" | sed -e '1s/^/WARNING: /' \ -e '2,$s/^/ /' >&2 # Propagate the correct exit status (expected to be 127 for a program # not found, 63 for a program that failed due to version mismatch). exit $st # Local variables: # eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: aptitude-robot-1.5.5/aptitude-robot-session0000755000175000017500000000464112757426511015775 00000000000000#!/bin/sh [ -f /etc/default/aptitude-robot ] && . /etc/default/aptitude-robot if [ ! -x /usr/sbin/aptitude-robot ]; then exit # aptitude-robot has been deinstalled but not purged fi if fuser -s /var/lib/dpkg/lock ; then echo 'another package manager is running. Exiting.' 1>&2 exit 1 fi if [ -n "$LOG_SESSION" ] ; then # the session log is made unique with a PID ending # so as to not overwrite an old log of a crashed aptitude-robot process LOG_SESSION="$LOG_SESSION".$$ touch "$LOG_SESSION" # only redirect STDOUT+STDERR if session log is available if [ -f "$LOG_SESSION" ]; then exec 1>"$LOG_SESSION" 2>&1 fi fi cleanup () { # finish session log echo "aptitude-robot ended at" $(date --rfc-3339=seconds) echo "" if [ -n "$LOG_SESSION" -a -f "$LOG_SESSION" ]; then # append session log to permanent log file if [ -n "$LOGFILE" ]; then touch "$LOGFILE" # create the log file if necessary if [ -f "$LOGFILE" ]; then cat "$LOG_SESSION" >> "$LOGFILE" fi fi # optionally process session log for reporting if [ -x "$SESSION_REPORT_COMMAND" ]; then "$SESSION_REPORT_COMMAND" "$LOG_SESSION" fi rm "$LOG_SESSION" fi } trap cleanup INT TERM QUIT HUP EXIT set -e echo "aptitude-robot started at" $(date --rfc-3339=seconds) # prevent infinite loops by limiting log file sizes MAX_LOGFILES_SIZE_BLOCKS=$(($MAX_LOGFILES_SIZE_BLOCKS + 0)) # force number [ $MAX_LOGFILES_SIZE_BLOCKS -gt 0 ] && ulimit -f $MAX_LOGFILES_SIZE_BLOCKS # called from a script aptitude should ask as few questions as possible # and just take the defaults. We expect the configuration management # to have provided the necessary config options beforehand DEBIAN_FRONTEND=noninteractive export DEBIAN_FRONTEND DEBIAN_PRIORITY=critical export DEBIAN_PRIORITY # -q (for --quiet) suppresses percentage reporting for downloads # but leaves most regular output to be collected in the log file /usr/bin/aptitude -q update if egrep -q '[EW]: Failed to fetch ' "$LOG_SESSION"; then echo "E: aptitude-robot failed to fetch some APT repositories. Aborting." exit 2 fi touch /var/lib/apt/update_success /usr/sbin/aptitude-robot -y -q "$@" \ -o DPkg::Options::=--force-confdef \ -o DPkg::Options::=--force-confold \ < /dev/null if [ -n "$POST_SESSION_HOOK" ]; then $POST_SESSION_HOOK fi aptitude-robot-1.5.5/CONTRIBUTING.mdown0000644000175000017500000000250113203347275014366 00000000000000Contributing to Aptitude-Robot and Reporting Bugs ================================================= Contact ------- * Elmar S. Heeb , PGP: 71B8F031E648BCD95EAC18FA47712171F2ED62FB * Axel Beckert , PGP: 2517B724C5F6CA9953296E612FF9CD59612616B5 You can find both keys on common keyservers like e.g. `keys.gnupg.net`. You can also find both keys in Debian's [debian-keyring](https://packages.debian.org/debian-keyring) package, Elmar's in the `/usr/share/keyrings/debian-maintainers.gpg` file and Axel's in the ` /usr/share/keyrings/debian-keyring.gpg` file. Reporting Bugs -------------- Please report bugs in aptitude-robot either to [Debian's Bug Tracking System](https://bugs.debian.org/cgi-bin/pkgreport.cgi?src=aptitude-robot) by using Debian's [reportbug](https://packages.debian.org/stable/reportbug) utility or via [via the GitHub Issue tracker](https://github.com/elmar/aptitude-robot/issues). In case you want to report a security issue in aptitude-robot or if you neither run Debian nor have a GitHub account, please contact us by e-mail. Security issues are preferably reported PGP-encrypted. Contributing Patches -------------------- Patches can be submitted as [pull request on GitHub](https://github.com/elmar/aptitude-robot/pulls) or by e-mail, preferably generated with `git format-patch`. aptitude-robot-1.5.5/mail-log-on-error0000755000175000017500000000265613125146522014607 00000000000000#!/bin/sh REPORT_MAIL=false REPORT_FILE=$(mktemp --tmpdir aptitude-run-mailreport.XXXXXXXXXX) REPORT_RCPT=root REPORTING_HELPERS="$(dirname $0)/reporting-helpers" if [ -f "$REPORTING_HELPERS" ]; then . "$REPORTING_HELPERS" else echo "E: $REPORTING_HELPERS helpers not present, bailing out." 1>&2 exit 1; fi if [ -z "$REPORT_FILE" ]; then echo "ERROR: $0: Couldn't create temporary file $REPORT_FILE using mktemp. Aborting." | \ mail -s "aptitude-robot report on $(hostname) (ERROR)" $REPORT_RCPT exit 1 fi cat >> $REPORT_FILE << EOF Aptitude-Robot Report ===================== EOF # # check for remaining upgrades # REMAINING_UPGRADES="$(remaining_upgrades)" if [ -n "$REMAINING_UPGRADES" ]; then COLOR=red MSG="${MSG}${REMAINING_UPGRADES}" fi # # check for errors in log file # ERRORS_IN_LOGFILE=$(errors_in_logfile "$1") if [ "$ERRORS_IN_LOGFILE" = "errors" ]; then REPORT_MAIL=true cat >> "$REPORT_FILE" << EOF Log File Errors --------------- Please investigate the errors mentioned in the log file EOF print_logfile "$1" >> "$REPORT_FILE" elif [ "$ERRORS_IN_LOGFILE" = "notfound" ]; then REPORT_MAIL=true cat >> "$REPORT_FILE" << EOF Missing Log File ---------------- aptitude-robot produced no log file. Please investigate. EOF fi if [ "$REPORT_MAIL" = true ]; then mail -s "aptitude-robot report on $(hostname)" "$REPORT_RCPT" < "$REPORT_FILE" fi rm "$REPORT_FILE" aptitude-robot-1.5.5/README.mdown0000644000175000017500000003062513740442113013415 00000000000000Aptitude Robot ============== Automate package choice management ## Introduction On an individual Debian host it is most convenient to select packages for installation and removal within the interactive mode of aptitude. If you do the same for several machines the task becomes repetitive. If you like to maintain certain standard package choices across those machines this is not only tedious but error prone. The solution is to write some scripts that automate the installation/removal of packages. Either apt-get or the command line interface of aptitude allow you to do this. `aptitude-robot` is such a configurable script. It is a thin layer that reads in some configuration files and calls aptitude via the command line interface with the appropriate parameters. The configuration files allow you to separate out common packages from host specific ones. This way you can keep the list packages simple to read rather than having to write custom versions of the script for each host. ## Installation The simplest way to install is via a Debian package aptitude install aptitude-robot This works when `aptitude-robot` is available for your version in one of the repositories (you may need to check out the backports). If it is not in one of the repositories you use or if you want to install a newer version follow the instructions below on how to [build from source](#building-from-source). ## Configuration With the exception of `/etc/default/aptitude-robot` the configuration files are in the directory `/etc/aptitude-robot`. ### Package Lists In `/etc/aptitude-robot/pkglist.d/` you can add one or more package lists. Their names should conform to the run-parts(8) conventions (e.g., a dot in the file name will disable it). These files should contain one package name per line preceded by an action you want to perform with this package. The actions are specified with the characters used by aptitude, i.e., `+` for install, `-` for removal, etc. Read the aptitude(8) man page under "override specifier" for a complete list. Comments starting with `#` are allowed. If you have more than one package list file they are concatenated according to the rules of run-parts(8). If a package appears more than once the last action mentioned applies. Example #example: /etc/aptitude-robot/pkglist.d/10_mypackages + less + htop + build-essential - ppp If you install additional packages via aptitude-robot it is up to you to set up the configuration for those packages beforehand. If you call `aptitude-robot` on the command line it will ask for missing configuration information the same way aptitude would. The automatic invocations of `aptitude-robot` by cron or init try to always choose the default configuration non-interactively. Make sure you provide the appropriate configuration files and debconf preseeds for the packages you intend to install. ### Options The directory `/etc/aptitude-robot/options.d/` may contain files in which you can specify additional command-line options for aptitude. List one option per line. Typical options might be: --without-recommends --add-user-tag-to "aptitude-robot,?action(install)" -o 'Aptitude::ProblemResolver::Remove-Level=maximum' See [Configuring the interactive dependency resolver](http://aptitude.alioth.debian.org/doc/en/ch02s03s05.html) for documentation about influencing automatic conflict resolution with aptitude. The files in this directory must adhere to `run-parts(8)` conventions. ### Triggers The directories `/etc/aptitude-robot/triggers.pre` and `/etc/aptitude-robot/triggers.post` may contain scripts that will be run by aptitude-robot before and after aptitude, respectively. They are run by `run-parts(8)` via [`Run::Parts`](https://metacpan.org/pod/Run::Parts). By default there are no trigger scripts. Be careful placing scripts in these directories as they are always run whether or not aptitude performs some action. For scripts that should only run upon installation, removal, or upgrade of a specific package the relevant preinst, postinst, etc. scripts of the package would be the right place. In `/etc/aptitude-robot/triggers.post/90-cleanup.example` you can find an example of the trigger script that cleans up after upgrading/installing/removing. Remove the `.example` suffix to enable it. ### Cron and Init Defaults In `/etc/default/aptitude-robot` you can control the execution of aptitude-robot by setting some variables. # set to "no" to prevent the daily cron run RUN_DAILY=yes # set to "no" to prevent the init run at boot time RUN_ON_BOOT=yes # location for the session log (will be deleted after aptitude-robot has ended) LOG_SESSION=/var/log/aptitude-robot.session.log # log file to keep the output of aptitude-robot LOGFILE=/var/log/aptitude-robot.log # (optional) mail address to send the session log to MAIL_TO= ## Running and Deployment A default installation of aptitude-robot will run `aptitude full-upgrade '~U !~ahold'` each time it is run. Out of the box aptitude-robot will run daily and at each boot. You can call `aptitude-robot` manually whenever you need. You may also call `aptitude-robot-session` which in addition deals with writing to the log file and performing the installations non-interactively. If you want to run `aptitude-robot` periodically more often than daily you can write your own crontab entry, e.g., in `/etc/cron.d/aptitude-robot`. In your own cron job you most likely want to call `aptitude-robot-session`. You may then want to disable the daily cron jobs by setting `RUN_DAILY=no` in `/etc/default/aptitude-robot`. ## Scenarios ### Server with Mostly Unattended Upgrades By default aptitude-robot will upgrade all packages daily. On a server you want to have security upgrades deployed as soon as possible but for some critical packages you want to test them first with your configuration before installing an upgrade. With aptitude-robot you can choose to keep some packages while automatically upgrading all the others. E.g., on a web server with a complex configuration you may add a package list in `/etc/aptitude-robots/pkglist.d/90_keep_web` with the contents: : apache2 : apache2-mpm-prefork : apache2-utils : apache2.2-bin : apache2.2-common : libapache2-mod-php5 #etc. You can then concentrate on the security announcement for apache and its plugins. All other security announcement you can read at you leisure for educational purposes only. ### Standardized Deployments On a development host you can build up and test package lists. You can then use these lists to deploy (and maintain) hosts with a standard set of packages. By splitting up the package list into several files according to usage patterns you can arrange for optional installs too. If you want to prevent automatic upgrade of certain packages but still have them installed on initial deployment you can specify both actions, as follows: + foo : foo During the initial deployment you would run `aptitude-robot` with the `--force-install` option to ignore the keep action. ## Related Packages ### Just automatic upgrades or notifications If you are just interested in automatic upgrades you should look into [unattended-upgrades](http://packages.debian.org/unattended-upgrades), [cron-apt](http://packages.debian.org/cron-apt), or [apticron](http://packages.debian.org/apticron). ### Restarting services as needed After the upgrade you may need to restart some processes. See the [needrestart](http://packages.debian.org/stable/needrestart) package for a way to automatically restart affected services. If you also have desktop users, you may be also interested in the [needrestart-session](http://packages.debian.org/sid/needrestart-session) package which informs logged in desktop users about the necessity to restart some of their running programs. If you're just interested in a list of programs which should be restarted with automatically doing so, have a look `checkrestart` from the [debian-goodies](http://packages.debian.org/sid/debian-goodies) package. There exists also a post-install trigger script named [restart-services](https://github.com/tpo/debian-goodies/blob/master/restart-services) which parses the output of `checkrestart` to automatically restart services. See also the [wishlist bug #676509](https://bugs.debian.org/676509) of debian-goodies. ### Checking for severe bugs before installing updates To prevent automatically upgrading packages to versions which are known to be severely broken, you can use [apt-listbugs](http://packages.debian.org/apt-listbugs). If apt-listbugs finds release-critical bugs it will prevent aptitude-robot from updating _any_ package. Please be aware that you need to _manually_ upgrade the remaining packages in this case. Example: The following packages will be upgraded: chromium chromium-browser chromium-inspector icedove iceowl-extension libmysqlclient-dev libmysqlclient18 mysql-client mysql-client-5.5 mysql-common openjdk-7-jre openjdk-7-jre-headless openjdk-7-jre-lib openjdk-7-jre-zero 14 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/123 MB of archives. After unpacking 2,011 kB will be used. Writing extended state information... grave bugs of chromium (34.0.1847.116-1~deb7u1 -> 34.0.1847.132-1~deb7u1) #745794 - chromium: Missing build dep[…] (Fixed: chromium-browser/34.0.1847.132-1) grave bugs of icedove (24.4.0-1~deb7u1 -> 24.5.0-1~deb7u1) #743748 - Folders are not listed, blank folder pane Summary: icedove(1 bug), chromium(1 bug) ********************************************************************** ****** Exiting with an error in order to stop the installation. ****** ********************************************************************** E: Sub-process /usr/sbin/apt-listbugs apt || exit 10 returned an error code (10) E: Failure running script /usr/sbin/apt-listbugs apt || exit 10 A package failed to install. Trying to recover: Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... aptitude exited with value 255 aptitude-robot ended at 2014-05-07 03:37:17+02:00 ### Monitoring and Reporting In `/usr/share/aptitude-robot/` there are two reporting scripts which can report `aptitude-robot-session`'s result either to a [Xymon](http://www.xymon.com/) (formerly called Hobbit) monitoring server (`xymon-report`) or by e-mail (`mail-log-on-error`). If you need to, you can configure in `/etc/default/aptitude-robot` what goes into the report and what not: # (optional) exclude some rather verbose output from the reporting REPORT_LOG_DROP='is (currently )?not installed, so it will not be|is already installed at the requested version|cannot be marked/unmarked as automatically installed' # (optional) Don't treat some specific warnings or errors as such REPORT_LOG_IGNORE='uses weak digest algorithm' The values are used as pattern parameter to `egrep -v` on the log file and default to the empty string. ## Building from Source You can build `aptitude-robot` from the GIT repository as follows: sudo apt-get -y install autoconf autotools-dev build-essential devscripts git sudo apt-get -y install libmouse-perl librun-parts-perl perl-doc git clone https://github.com/elmar/aptitude-robot.git cd aptitude-robot autoreconf --force --install ./configure make dist mv *.tar.gz ../$(echo *.tar.gz | sed -e 's/robot-/robot_/' -e 's/\.tar/.orig.tar/') make distclean debuild -uc -us debclean cd .. ls -l *.deb This will generate a Debian package that you can install with dpkg: sudo dpkg -i *.deb ## Version Numbers aptitude-robot tries to follow [Semantic Versioning](http://semver.org/), but usually omits the patch/micro version if it is a zero, i.e. version "1.5" is equivalent to "1.5.0". ## Thanks aptitude-robot was created as a more general version of a local maintenance script called [dphys-admin](http://nic.phys.ethz.ch/projects/dphys-admin/). As such various people contributed in various forms, from code to bug reports to discussions. - Axel Beckert (co-maintainer of aptitude-robot, last maintainer of dphys-admin) - Neil Franklin (original author of dphys-admin) - Gürkan Myczko - Claude Becker - Tomas Pospisek - Daniel Hartwig aptitude-robot-1.5.5/t/0000755000175000017500000000000014165277571011747 500000000000000aptitude-robot-1.5.5/t/021_file-slurp.t0000755000175000017500000000220713652025500014503 00000000000000#!/usr/bin/perl use strict; use warnings; use 5.010; use English qw( -no_match_vars ); use Test::More; use File::Basename; my $topdir = $ENV{TOPDIR} || (dirname($0) . '/..'); my $testdatadir = "$topdir/t/testdata"; my $arcmd = $ENV{AUTOPKGTEST_TMP} ? '/usr/sbin/aptitude-robot' : "$topdir/aptitude-robot"; require_ok( $arcmd ); my $aptitude_command; $aptitude_command = Aptitude::Robot::Command->new( config_dir => "$testdatadir/empty-config" ); is_deeply( [ $aptitude_command->run_parts_lines('pkglist.d') ], [], 'empty config dir should result in empty lines list' ); $aptitude_command = Aptitude::Robot::Command->new( config_dir => "$testdatadir/single-file" ); is_deeply( [ $aptitude_command->run_parts_lines('pkglist.d') ], [ '+ foo', '- bar' ], 'lines for single file case', ); $aptitude_command = Aptitude::Robot::Command->new( config_dir => "$testdatadir/multiple-files" ); is_deeply( [ $aptitude_command->run_parts_lines('pkglist.d') ], [ '+ foo', '- bar', '= fnord', '- foo', ': quux', ], 'lines for multiple file case', ); done_testing(); aptitude-robot-1.5.5/t/001_help-option.t0000755000175000017500000000065613652025232014665 00000000000000#!/usr/bin/perl use strict; use warnings; use 5.010; use English qw( -no_match_vars ); use Test::More; use File::Basename; my $topdir = $ENV{TOPDIR} || (dirname($0) . '/..'); my $testdatadir = "$topdir/t/testdata"; my @arcmd = $ENV{AUTOPKGTEST_TMP} ? qw(/usr/sbin/aptitude-robot) : (qw(perl), "$topdir/aptitude-robot"); ok( system(@arcmd, '--help') == 0, 'option --help should be allowed' ); done_testing(); aptitude-robot-1.5.5/t/059_force-install-cli.t0000755000175000017500000000142413652026533015752 00000000000000#!/usr/bin/perl use strict; use warnings; use 5.010; use English qw( -no_match_vars ); use Test::More; use File::Basename; my $topdir = $ENV{TOPDIR} || (dirname($0) . '/..'); my $testdatadir = "$topdir/t/testdata"; my $arcmd = $ENV{AUTOPKGTEST_TMP} ? '/usr/sbin/aptitude-robot' : "$topdir/aptitude-robot"; use IPC::Run qw( run ); my $in = ''; my $out; my $err; my $cmd; $cmd = [ $arcmd, "--config-dir=$testdatadir/force-install-1", '--force-install', '--show-cmdline', ]; ok( run( $cmd, \$in, \$out, \$err ), 'should allow --force-install option on the command line', ); is( $out, "'aptitude' 'full-upgrade' '~U !~ahold' 'bar-' 'baz:' 'foo+' 'quux='\n", 'command line should not show hold and keep entries', ); done_testing(); aptitude-robot-1.5.5/t/011_simple-calls-from-cli.t0000755000175000017500000000165214165277571016537 00000000000000#!/usr/bin/perl use strict; use warnings; use 5.010; use English qw( -no_match_vars ); use Test::More; use File::Basename; my $topdir = $ENV{TOPDIR} || (dirname($0) . '/..'); my $testdatadir = "$topdir/t/testdata"; my $arcmd = $ENV{AUTOPKGTEST_TMP} ? '/usr/sbin/aptitude-robot' : "$topdir/aptitude-robot"; use IPC::Run qw( run ); my $in = ''; my $out; my $err; my $cmd; $cmd = [ $arcmd, '--config-dir=/dev/null', '--show-cmdline', ]; ok( not(run( $cmd, \$in, \$out, \$err )), 'should complain about non-existent config dir' ); $cmd = [ "$topdir/aptitude-robot", "--config-dir=$testdatadir/empty-config", '--show-cmdline', ]; ok( run( $cmd, \$in, \$out, \$err ), 'empty config dir should give only `aptitude full-upgrade ~U !~ahold`' ); is( $out, "'aptitude' 'full-upgrade' '~U !~ahold'\n", 'command line should be `aptitude full-upgrade ~U !~ahold`'); done_testing(); aptitude-robot-1.5.5/t/031_extra-space.t0000755000175000017500000000115713652026065014650 00000000000000#!/usr/bin/perl use strict; use warnings; use 5.010; use English qw( -no_match_vars ); use Test::More; use File::Basename; my $topdir = $ENV{TOPDIR} || (dirname($0) . '/..'); my $testdatadir = "$topdir/t/testdata"; my $arcmd = $ENV{AUTOPKGTEST_TMP} ? '/usr/sbin/aptitude-robot' : "$topdir/aptitude-robot"; require_ok( $arcmd ); my $aptitude_command; $aptitude_command = Aptitude::Robot::Command->new(config_dir => "$testdatadir/extra-space"); is_deeply( [ $aptitude_command->command() ], ['aptitude', 'full-upgrade', '~U !~ahold', 'bar-', 'foo+'], 'single file case', ); done_testing(); aptitude-robot-1.5.5/t/030_parser.t0000755000175000017500000000215313652026034013720 00000000000000#!/usr/bin/perl use strict; use warnings; use 5.010; use English qw( -no_match_vars ); use Test::More; use File::Basename; my $topdir = $ENV{TOPDIR} || (dirname($0) . '/..'); my $testdatadir = "$topdir/t/testdata"; my $arcmd = $ENV{AUTOPKGTEST_TMP} ? '/usr/sbin/aptitude-robot' : "$topdir/aptitude-robot"; require_ok( $arcmd ); my $aptitude_command; $aptitude_command = Aptitude::Robot::Command->new(config_dir => "$testdatadir/empty-config"); is_deeply( [ $aptitude_command->command() ], ['aptitude', 'full-upgrade', '~U !~ahold'], 'empty config dir should result in empty file list' ); $aptitude_command = Aptitude::Robot::Command->new(config_dir => "$testdatadir/single-file"); is_deeply( [ $aptitude_command->command() ], ['aptitude', 'full-upgrade', '~U !~ahold', 'bar-', 'foo+'], 'single file case', ); $aptitude_command = Aptitude::Robot::Command->new(config_dir => "$testdatadir/multiple-files"); is_deeply( [ $aptitude_command->command() ], ['aptitude', 'full-upgrade', '~U !~ahold', 'bar-', 'fnord=', 'foo-', 'quux:'], 'multiple file case', ); done_testing(); aptitude-robot-1.5.5/t/041_options-syntax.t0000755000175000017500000000132713652026435015454 00000000000000#!/usr/bin/perl use strict; use warnings; use 5.010; use English qw( -no_match_vars ); use Test::More; use File::Basename; my $topdir = $ENV{TOPDIR} || (dirname($0) . '/..'); my $testdatadir = "$topdir/t/testdata"; my $arcmd = $ENV{AUTOPKGTEST_TMP} ? '/usr/sbin/aptitude-robot' : "$topdir/aptitude-robot"; require_ok( $arcmd ); my $aptitude_command; $aptitude_command = Aptitude::Robot::Command->new( config_dir => "$testdatadir/option-with-parameter" ); is_deeply( [ $aptitude_command->options() ], [ '-o', 'Aptitude::Log=/tmp/my-log', '-o', 'Aptitude::Foo=bar quux', '--display-format', 'foo bar', ], 'options with parameters and spaces' ); done_testing(); aptitude-robot-1.5.5/t/052_force-install.t0000755000175000017500000000133413652026511015172 00000000000000#!/usr/bin/perl use strict; use warnings; use 5.010; use English qw( -no_match_vars ); use Test::More; use File::Basename; my $topdir = $ENV{TOPDIR} || (dirname($0) . '/..'); my $testdatadir = "$topdir/t/testdata"; my $arcmd = $ENV{AUTOPKGTEST_TMP} ? '/usr/sbin/aptitude-robot' : "$topdir/aptitude-robot"; require_ok( $arcmd ); my $aptitude_command; $aptitude_command = Aptitude::Robot::Command->new( config_dir => "$testdatadir/force-install-2", force_install => 1, ); is_deeply( [ $aptitude_command->command() ], ['aptitude', 'full-upgrade', '~U !~ahold', 'bar-', 'baz:', 'foo+', 'quux='], 'with force-install + and - override : and/or = even when : or = come first' ); done_testing(); aptitude-robot-1.5.5/t/040_extra-options.t0000755000175000017500000000200213652026363015237 00000000000000#!/usr/bin/perl use strict; use warnings; use 5.010; use English qw( -no_match_vars ); use Test::More; use File::Basename; my $topdir = $ENV{TOPDIR} || (dirname($0) . '/..'); my $testdatadir = "$topdir/t/testdata"; my $arcmd = $ENV{AUTOPKGTEST_TMP} ? '/usr/sbin/aptitude-robot' : "$topdir/aptitude-robot"; require_ok( $arcmd ); my $aptitude_command; $aptitude_command = Aptitude::Robot::Command->new(config_dir => "$testdatadir/empty-config"); is_deeply( [ $aptitude_command->options() ], [ ], 'options method returns empty array on non-existing options file' ); $aptitude_command = Aptitude::Robot::Command->new(config_dir => "$testdatadir/extra-options"); is_deeply( [ $aptitude_command->options() ], [qw[ --download-only --without-recommends ]], 'options method of Aptitude::Robot::Command' ); is_deeply( [ $aptitude_command->command() ], [qw[ aptitude --download-only --without-recommends full-upgrade ], '~U !~ahold'], 'command with options' ); done_testing(); aptitude-robot-1.5.5/t/061_missing-package-name.t0000644000175000017500000000234714125122337016411 00000000000000#!/usr/bin/perl use strict; use warnings; use 5.010; use English qw( -no_match_vars ); use Test::More; use Test::Warnings qw(:all); use Test::Deep qw(cmp_deeply re); use File::Basename; my $topdir = $ENV{TOPDIR} || (dirname($0) . '/..'); my $testdatadir = "$topdir/t/testdata"; my $arcmd = $ENV{AUTOPKGTEST_TMP} ? '/usr/sbin/aptitude-robot' : "$topdir/aptitude-robot"; require_ok( $arcmd ); my $aptitude_command; my @aptitude_command; $aptitude_command = Aptitude::Robot::Command->new(config_dir => "$testdatadir/missing-package-name"); cmp_deeply( [ warnings { @aptitude_command = $aptitude_command->command() } ], [ re("Missing package name in line '\\+' somewhere under .*/testdata/missing-package-name/pkglist.d/. Ignoring this line.\n"), re("Missing package name in line '-' somewhere under .*/testdata/missing-package-name/pkglist.d/. Ignoring this line.\n"), re("Missing package name in line '_' somewhere under .*/testdata/missing-package-name/pkglist.d/. Ignoring this line.\n"), ], 'Warnings about missing package have been emitted' ); is_deeply( [ @aptitude_command ], ['aptitude', 'full-upgrade', '~U !~ahold', 'bar-', 'foo+'], 'missing package name case', ); done_testing(); aptitude-robot-1.5.5/t/060_triggers.t0000755000175000017500000000226013652032715014257 00000000000000#!/usr/bin/perl use strict; use warnings; use 5.010; use English qw( -no_match_vars ); use Test::More; use File::Basename; my $topdir = $ENV{TOPDIR} || (dirname($0) . '/..'); my $testdatadir = "$topdir/t/testdata"; my $arcmd = $ENV{AUTOPKGTEST_TMP} ? '/usr/sbin/aptitude-robot' : "$topdir/aptitude-robot"; use IPC::Run qw( run ); my $in = ''; my $out; my $err; my $cmd; my $config_dir; $config_dir = "$testdatadir/triggers-empty"; $cmd = [ $arcmd, "--config-dir=$config_dir", '--show-cmdline', ]; ok( run( $cmd, \$in, \$out, \$err ), 'should run no triggers with empty trigger dirs', ); is( $out, "'aptitude' 'full-upgrade' '~U !~ahold'\n", 'should only show full-upgrade ~U !~ahold with empty trigger dirs', ); $config_dir = "$testdatadir/triggers"; $cmd = [ "$topdir/aptitude-robot", "--config-dir=$config_dir", '--show-cmdline', ]; ok( run( $cmd, \$in, \$out, \$err ), 'should run triggers with trigger dirs', ); is( $out, "$config_dir/triggers.pre/10_foo\n" . "'aptitude' 'full-upgrade' '~U !~ahold'\n" . "$config_dir/triggers.post/10_bar\n", 'should only show trigger commands', ); done_testing(); aptitude-robot-1.5.5/t/014_pass-extra-options-cli.t0000755000175000017500000000131313652025452016753 00000000000000#!/usr/bin/perl use strict; use warnings; use 5.010; use English qw( -no_match_vars ); use Test::More; use File::Basename; my $topdir = $ENV{TOPDIR} || (dirname($0) . '/..'); my $testdatadir = "$topdir/t/testdata"; my $arcmd = $ENV{AUTOPKGTEST_TMP} ? '/usr/sbin/aptitude-robot' : "$topdir/aptitude-robot"; use IPC::Run qw( run ); my $in = ''; my $out; my $err; my $cmd; $cmd = [ $arcmd, "--config-dir=$testdatadir/empty-config", '--show-cmdline', '--foobar', ]; ok( run( $cmd, \$in, \$out, \$err ), 'simulate switch' ); is( $out, "'aptitude' '--foobar' 'full-upgrade' '~U !~ahold'\n", 'command line should pass through arbitrary extra options'); done_testing(); aptitude-robot-1.5.5/t/050_force-install.t0000755000175000017500000000215313652026450015172 00000000000000#!/usr/bin/perl use strict; use warnings; use 5.010; use English qw( -no_match_vars ); use Test::More; use File::Basename; my $topdir = $ENV{TOPDIR} || (dirname($0) . '/..'); my $testdatadir = "$topdir/t/testdata"; my $arcmd = $ENV{AUTOPKGTEST_TMP} ? '/usr/sbin/aptitude-robot' : "$topdir/aptitude-robot"; require_ok( $arcmd ); my $aptitude_command; ok( $aptitude_command = Aptitude::Robot::Command->new( config_dir => "$testdatadir/empty-config", ), 'Aptitude::Robot::Command->new without the force_install parameter' ); is( $aptitude_command->force_install(), 0, 'force_install parameter should not be set' ); ok( $aptitude_command = Aptitude::Robot::Command->new( config_dir => "$testdatadir/empty-config", force_install => 1, ), 'Aptitude::Robot::Command->new should accept force_install parameter' ); is( $aptitude_command->force_install(), 1, 'force_install parameter should be set' ); is_deeply( [ $aptitude_command->command() ], ['aptitude', 'full-upgrade', '~U !~ahold'], 'even with --force-install the empty config dir should result in empty file list' ); done_testing(); aptitude-robot-1.5.5/t/070_reporting_helper.t0000644000175000017500000000243214165276435016011 00000000000000#!/usr/bin/perl use strict; use warnings; use 5.010; use English qw( -no_match_vars ); use Test::More; use File::Basename; use File::Temp qw(tempfile); my $topdir = $ENV{TOPDIR} || (dirname($0) . '/..'); my $testdatadir = "$topdir/t/testdata"; my $rph = $ENV{AUTOPKGTEST_TMP} ? '/usr/share/aptitude-robot/reporting-helpers' : './reporting-helpers'; my $test_message = <new(config_dir => '/dev/null'); is( ref $aptitude_command, 'Aptitude::Robot::Command', 'generate new object'); is_deeply( [ $aptitude_command->command() ], [], 'non-directory config dir should give empty command array'); is( $aptitude_command->error_msg(), 'Error: /dev/null is not a aptitude-robot config directory', 'check for error string'); $aptitude_command = Aptitude::Robot::Command->new( config_dir => "$testdatadir/empty-config" ); is( ref $aptitude_command, 'Aptitude::Robot::Command', 'generate new object'); is_deeply( [ $aptitude_command->command() ], ['aptitude', 'full-upgrade' ,'~U !~ahold'], 'empty config dir should result in `aptitude full-upgrade ~U !~ahold`' ); is( $aptitude_command->error_msg(), '', 'no error reported' ); done_testing(); aptitude-robot-1.5.5/t/testdata/0000755000175000017500000000000014125115403013535 500000000000000aptitude-robot-1.5.5/t/testdata/triggers-empty/0000755000175000017500000000000012042773671016534 500000000000000aptitude-robot-1.5.5/t/testdata/triggers-empty/pkglist.d/0000755000175000017500000000000012042773671020433 500000000000000aptitude-robot-1.5.5/t/testdata/triggers-empty/pkglist.d/.gitkeep0000644000175000017500000000000012042773671021772 00000000000000aptitude-robot-1.5.5/t/testdata/multiple-files/0000755000175000017500000000000012042773671016505 500000000000000aptitude-robot-1.5.5/t/testdata/multiple-files/pkglist.d/0000755000175000017500000000000012042773671020404 500000000000000aptitude-robot-1.5.5/t/testdata/multiple-files/pkglist.d/20_bar0000644000175000017500000000002512042773671021311 00000000000000= fnord - foo : quux aptitude-robot-1.5.5/t/testdata/multiple-files/pkglist.d/10_foo0000644000175000017500000000001412042773671021325 00000000000000+ foo - bar aptitude-robot-1.5.5/t/testdata/extra-space/0000755000175000017500000000000012042773671015766 500000000000000aptitude-robot-1.5.5/t/testdata/extra-space/pkglist.d/0000755000175000017500000000000012042773671017665 500000000000000aptitude-robot-1.5.5/t/testdata/extra-space/pkglist.d/10_foo0000644000175000017500000000002312042773671020606 00000000000000 + foo - bar aptitude-robot-1.5.5/t/testdata/extra-options/0000755000175000017500000000000012151260222016346 500000000000000aptitude-robot-1.5.5/t/testdata/extra-options/pkglist.d/0000755000175000017500000000000012042773671020265 500000000000000aptitude-robot-1.5.5/t/testdata/extra-options/pkglist.d/.gitkeep0000644000175000017500000000000012042773671021624 00000000000000aptitude-robot-1.5.5/t/testdata/extra-options/options.d/0000755000175000017500000000000012151260222020263 500000000000000aptitude-robot-1.5.5/t/testdata/extra-options/options.d/10-download0000644000175000017500000000002012151260222022143 00000000000000--download-only aptitude-robot-1.5.5/t/testdata/extra-options/options.d/20-without-recommends0000644000175000017500000000002512151260222024177 00000000000000--without-recommends aptitude-robot-1.5.5/t/testdata/comments/0000755000175000017500000000000012042773671015377 500000000000000aptitude-robot-1.5.5/t/testdata/comments/pkglist.d/0000755000175000017500000000000012412354663017273 500000000000000aptitude-robot-1.5.5/t/testdata/comments/pkglist.d/10_foo0000644000175000017500000000022012412354663020213 00000000000000# the hash make is the comment character # # keep the single hash mark on a line as an edge case + foo # trailing comments are supported - bar aptitude-robot-1.5.5/t/testdata/force-install-1/0000755000175000017500000000000012042773671016452 500000000000000aptitude-robot-1.5.5/t/testdata/force-install-1/pkglist.d/0000755000175000017500000000000012042773671020351 500000000000000aptitude-robot-1.5.5/t/testdata/force-install-1/pkglist.d/10_foo0000644000175000017500000000004512042773671021276 00000000000000+ foo : foo - bar = bar : baz = quux aptitude-robot-1.5.5/t/testdata/option-with-parameter/0000755000175000017500000000000012151260222017771 500000000000000aptitude-robot-1.5.5/t/testdata/option-with-parameter/pkglist.d/0000755000175000017500000000000012042773671021710 500000000000000aptitude-robot-1.5.5/t/testdata/option-with-parameter/pkglist.d/.gitkeep0000644000175000017500000000000012042773671023247 00000000000000aptitude-robot-1.5.5/t/testdata/option-with-parameter/options.d/0000755000175000017500000000000012151260222021706 500000000000000aptitude-robot-1.5.5/t/testdata/option-with-parameter/options.d/10-test0000644000175000017500000000012012151260222022737 00000000000000-o Aptitude::Log=/tmp/my-log -o Aptitude::Foo=bar quux --display-format=foo bar aptitude-robot-1.5.5/t/testdata/force-install-2/0000755000175000017500000000000012042773671016453 500000000000000aptitude-robot-1.5.5/t/testdata/force-install-2/pkglist.d/0000755000175000017500000000000012042773671020352 500000000000000aptitude-robot-1.5.5/t/testdata/force-install-2/pkglist.d/10_foo0000644000175000017500000000004512042773671021277 00000000000000: foo + foo = bar - bar : baz = quux aptitude-robot-1.5.5/t/testdata/empty-config/0000755000175000017500000000000012042773671016153 500000000000000aptitude-robot-1.5.5/t/testdata/empty-config/pkglist.d/0000755000175000017500000000000012042773671020052 500000000000000aptitude-robot-1.5.5/t/testdata/empty-config/pkglist.d/.gitkeep0000644000175000017500000000000012042773671021411 00000000000000aptitude-robot-1.5.5/t/testdata/missing-package-name/0000755000175000017500000000000014125115365017524 500000000000000aptitude-robot-1.5.5/t/testdata/missing-package-name/pkglist.d/0000755000175000017500000000000014125122373021420 500000000000000aptitude-robot-1.5.5/t/testdata/missing-package-name/pkglist.d/10_foo0000644000175000017500000000002214125115516022341 00000000000000+ foo - bar + - _ aptitude-robot-1.5.5/t/testdata/single-file/0000755000175000017500000000000012042773671015750 500000000000000aptitude-robot-1.5.5/t/testdata/single-file/pkglist.d/0000755000175000017500000000000012042773671017647 500000000000000aptitude-robot-1.5.5/t/testdata/single-file/pkglist.d/10_foo0000644000175000017500000000001412042773671020570 00000000000000+ foo - bar aptitude-robot-1.5.5/t/testdata/triggers/0000755000175000017500000000000012042773671015400 500000000000000aptitude-robot-1.5.5/t/testdata/triggers/pkglist.d/0000755000175000017500000000000012042773671017277 500000000000000aptitude-robot-1.5.5/t/testdata/triggers/pkglist.d/.gitkeep0000644000175000017500000000000012042773671020636 00000000000000aptitude-robot-1.5.5/t/testdata/triggers/triggers.pre/0000755000175000017500000000000012042773671020013 500000000000000aptitude-robot-1.5.5/t/testdata/triggers/triggers.pre/10_foo0000755000175000017500000000002612042773671020742 00000000000000#!/bin/bash echo foo aptitude-robot-1.5.5/t/testdata/triggers/triggers.post/0000755000175000017500000000000012042773671020212 500000000000000aptitude-robot-1.5.5/t/testdata/triggers/triggers.post/10_bar0000755000175000017500000000002612042773671021122 00000000000000#!/bin/bash echo bar aptitude-robot-1.5.5/t/032_comments.t0000755000175000017500000000115413652026112014250 00000000000000#!/usr/bin/perl use strict; use warnings; use 5.010; use English qw( -no_match_vars ); use Test::More; use File::Basename; my $topdir = $ENV{TOPDIR} || (dirname($0) . '/..'); my $testdatadir = "$topdir/t/testdata"; my $arcmd = $ENV{AUTOPKGTEST_TMP} ? '/usr/sbin/aptitude-robot' : "$topdir/aptitude-robot"; require_ok( $arcmd ); my $aptitude_command; $aptitude_command = Aptitude::Robot::Command->new(config_dir => "$testdatadir/comments"); is_deeply( [ $aptitude_command->command() ], ['aptitude', 'full-upgrade', '~U !~ahold', 'bar-', 'foo+'], 'single file case', ); done_testing(); aptitude-robot-1.5.5/t/051_force-install.t0000755000175000017500000000130013652026477015175 00000000000000#!/usr/bin/perl use strict; use warnings; use 5.010; use English qw( -no_match_vars ); use Test::More; use File::Basename; my $topdir = $ENV{TOPDIR} || (dirname($0) . '/..'); my $testdatadir = "$topdir/t/testdata"; my $arcmd = $ENV{AUTOPKGTEST_TMP} ? '/usr/sbin/aptitude-robot' : "$topdir/aptitude-robot"; require_ok( $arcmd ); my $aptitude_command; $aptitude_command = Aptitude::Robot::Command->new( config_dir => "$testdatadir/force-install-1", force_install => 1, ); is_deeply( [ $aptitude_command->command() ], ['aptitude', 'full-upgrade', '~U !~ahold', 'bar-', 'baz:', 'foo+', 'quux='], 'with force-install + and - override : and/or =' ); done_testing(); aptitude-robot-1.5.5/reporting-helpers0000644000175000017500000000475014142677047015023 00000000000000# -*- sh -*- # # This file is no shell script but to be sourced by other shell # scripts as a library of common helper functions, etc. # These variables can be overriden, but this should be used with care WARN='\bWarn|\bW:|^The following packages have unmet dependencies' ERROR='(^|[^-/])(\bError\b|\bErr:|\bE:|aptitude exited with value [^0])' ERROR_FALSE_POSITIVE='\b[Nn]o *[Ee]rror\b' # These variables are meant to be optionally set by the administrator. REPORT_LOG_DROP='' REPORT_LOG_IGNORE='' MSG=" Aptitude-Robot Report ===================== " if [ -f /etc/default/aptitude-robot ]; then . /etc/default/aptitude-robot fi # # check for remaining upgrades # remaining_upgrades() { UPGRADES_FILE=$(mktemp --tmpdir aptitude-upgrades.XXXXXXXXX) if [ -z "$UPGRADES_FILE" ]; then echo "ERROR: $(basename $0): Can't check for remaining upgrades: Couldn't create temporary file $UPGRADES_FILE using mktemp. " else aptitude search '~U !~ahold' > "$UPGRADES_FILE" if [ -s "$UPGRADES_FILE" ]; then echo "Remaining Upgrades: $(cat "$UPGRADES_FILE") " fi rm "$UPGRADES_FILE" fi } # # check if we need to filter stuff # cat_or_egrep_v() { if [ -n "$1" ]; then egrep -v "$1|$ERROR_FALSE_POSITIVE" else egrep -v "$ERROR_FALSE_POSITIVE" fi } # # mangle filters from egrep syntax to sed syntax, probably incomplete # egrep_to_sed() { printf '%s' "$1" | sed -e 's/[()|%]/\\&/g' } # # check for errors in log file # errors_in_logfile() { LOGFILE="$1" if [ -f "$LOGFILE" ]; then if cat "$LOGFILE" | cat_or_egrep_v "$REPORT_LOG_IGNORE" | egrep -q -i "$ERROR" >/dev/null 2>/dev/null; then echo errors return 2; fi if cat "$LOGFILE" | cat_or_egrep_v "$REPORT_LOG_IGNORE" | egrep -q -i "$WARN" >/dev/null 2>/dev/null; then echo warnings return 1 fi else echo notfound return 3 fi return 0 } # # print log file, but filtered # print_logfile() { cat "$1" | cat_or_egrep_v "$REPORT_LOG_DROP" } print_logfile_for_xymon() { print_logfile "$1" | \ sed -e "s%$(egrep_to_sed "$WARN")%\&yellow &%gi;s%$(egrep_to_sed "$ERROR")%\1\&red \2%gi" | \ sed -e "s%\&\(yellow\|red\) \(.*\($(egrep_to_sed "$ERROR_FALSE_POSITIVE")\)\)%\2%g" | \ if [ -n "$REPORT_LOG_IGNORE" ]; then sed -e "s%&\(yellow\|red\) \(.*\($(egrep_to_sed "$REPORT_LOG_IGNORE")\)\)%\&clear \2%g"; else cat fi } aptitude-robot-1.5.5/random-delay0000755000175000017500000000072712042773671013726 00000000000000#!/bin/sh # convert first argument to a number MAX_DELAY=$(( $1 + 0 )) [ $MAX_DELAY -gt 0 ] || exit # delay execution for a random number of seconds # analogous to the daily cron of apt and cron-apt if [ "$MAX_DELAY" -gt 0 ] ; then if [ -z "$RANDOM" ] ; then # A fix for shells that do not have this bash feature. RANDOM=$(dd if=/dev/urandom count=1 2> /dev/null | cksum | cut -c"1-5") fi DELAY=$(($RANDOM % $MAX_DELAY)) sleep $DELAY fi aptitude-robot-1.5.5/TODO.mdown0000644000175000017500000000237412757426511013240 00000000000000# TODO * catch error cases in pkglist.d files, i.e. write test cases (this will come once we have more experience with different scenarios) * check for allowed actions and report errors for bad ones * check for valid package names (but do not look up whether the package exists; that is aptitudes task and we do not want to duplicate it if only for performance reasons) * allow package+ and package&M (or &m) to be both specified for the same package (currently the last one wins) * maybe generate a package list from an installed system with the aim to clone a development system into production * with automatically maintained packages it may be useful to have a mechanism to divert certain files in a consistent way rather than manually (dpkg-divert automation) * Option --help for aptitude-robot-session * add an action with semantics "install but do not upgrade" this could (should?) be an action directly supported by aptitude on the command line between install(+) and keep(:) can be implemented by a search pattern (for a hypothetical package "foobar"): aptitude install foobar+ '~i foobar:' maybe define '%' as an additional action to do just that * Factor out code which is present in both, xymon-report and mail-log-on-error. aptitude-robot-1.5.5/configure.ac0000644000175000017500000000053414125113417013674 00000000000000AC_PREREQ([2.67])dnl require version in Debian squeeze (or higher) AC_INIT( [Aptitude Robot], [1.5.5], [https://github.com/elmar/aptitude-robot/issues], [aptitude-robot], [https://github.com/elmar/aptitude-robot] ) AC_CONFIG_AUX_DIR([build-aux]) AM_INIT_AUTOMAKE([foreign -Wall -Werror]) AC_CONFIG_FILES([Makefile]) AC_OUTPUT aptitude-robot-1.5.5/aclocal.m40000644000175000017500000006572714165301201013257 00000000000000# generated automatically by aclocal 1.16.5 -*- Autoconf -*- # Copyright (C) 1996-2021 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.71],, [m4_warning([this file was generated for autoconf 2.71. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically 'autoreconf'.])]) # Copyright (C) 2002-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.16' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.16.5], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.16.5])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to # '$srcdir', '$srcdir/..', or '$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is '.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl # Expand $ac_aux_dir to an absolute path. am_aux_dir=`cd "$ac_aux_dir" && pwd` ]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC]) [_AM_PROG_CC_C_O ]) # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.65])dnl m4_ifdef([_$0_ALREADY_INIT], [m4_fatal([$0 expanded multiple times ]m4_defn([_$0_ALREADY_INIT]))], [m4_define([_$0_ALREADY_INIT], m4_expansion_stack)])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [AC_DIAGNOSE([obsolete], [$0: two- and three-arguments forms are deprecated.]) m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if( m4_ifset([AC_PACKAGE_NAME], [ok]):m4_ifset([AC_PACKAGE_VERSION], [ok]), [ok:ok],, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) AM_MISSING_PROG([AUTOCONF], [autoconf]) AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) AM_MISSING_PROG([AUTOHEADER], [autoheader]) AM_MISSING_PROG([MAKEINFO], [makeinfo]) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # AC_SUBST([mkdir_p], ['$(MKDIR_P)']) # We need awk for the "check" target (and possibly the TAP driver). The # system "awk" is bad on some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES([CC])], [m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES([CXX])], [m4_define([AC_PROG_CXX], m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES([OBJC])], [m4_define([AC_PROG_OBJC], m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], [_AM_DEPENDENCIES([OBJCXX])], [m4_define([AC_PROG_OBJCXX], m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl ]) # Variables for tags utilities; see am/tags.am if test -z "$CTAGS"; then CTAGS=ctags fi AC_SUBST([CTAGS]) if test -z "$ETAGS"; then ETAGS=etags fi AC_SUBST([ETAGS]) if test -z "$CSCOPE"; then CSCOPE=cscope fi AC_SUBST([CSCOPE]) AC_REQUIRE([AM_SILENT_RULES])dnl dnl The testsuite driver may need to know about EXEEXT, so add the dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl # POSIX will say in a future version that running "rm -f" with no argument # is OK; and we want to be able to make that assumption in our Makefile # recipes. So use an aggressive probe to check that the usage we want is # actually supported "in the wild" to an acceptable degree. # See automake bug#10828. # To make any issue more visible, cause the running configure to be aborted # by default if the 'rm' program in use doesn't match our expectations; the # user can still override this though. if rm -f && rm -fr && rm -rf; then : OK; else cat >&2 <<'END' Oops! Your 'rm' program seems unable to run without file operands specified on the command line, even when the '-f' option is present. This is contrary to the behaviour of most rm programs out there, and not conforming with the upcoming POSIX standard: Please tell bug-automake@gnu.org about your system, including the value of your $PATH and any error possibly output before this message. This can help us improve future automake versions. END if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then echo 'Configuration will proceed anyway, since you have set the' >&2 echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 echo >&2 else cat >&2 <<'END' Aborting the configuration process, to ensure you take notice of the issue. You can download and install GNU coreutils to get an 'rm' implementation that behaves properly: . If you want to complete the configuration process using your problematic 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM to "yes", and re-run configure. END AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) fi fi dnl The trailing newline in this macro's definition is deliberate, for dnl backward compatibility and to allow trailing 'dnl'-style comments dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. ]) dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi AC_SUBST([install_sh])]) # Copyright (C) 2003-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it is modern enough. # If it is, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl if test x"${MISSING+set}" != xset; then MISSING="\${SHELL} '$am_aux_dir/missing'" fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= AC_MSG_WARN(['missing' script is too old or missing]) fi ]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # -------------------- # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), [1])]) # _AM_SET_OPTIONS(OPTIONS) # ------------------------ # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[[\\\"\#\$\&\'\`$am_lf]]*) AC_MSG_ERROR([unsafe absolute working directory name]);; esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi if test "$[2]" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT([yes]) # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi AC_CONFIG_COMMANDS_PRE( [AC_MSG_CHECKING([that generated files are newer than configure]) if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi AC_MSG_RESULT([done])]) rm -f conftest.file ]) # Copyright (C) 2009-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SILENT_RULES([DEFAULT]) # -------------------------- # Enable less verbose build rules; with the default set to DEFAULT # ("yes" being less verbose, "no" or empty being verbose). AC_DEFUN([AM_SILENT_RULES], [AC_ARG_ENABLE([silent-rules], [dnl AS_HELP_STRING( [--enable-silent-rules], [less verbose build output (undo: "make V=1")]) AS_HELP_STRING( [--disable-silent-rules], [verbose build output (undo: "make V=0")])dnl ]) case $enable_silent_rules in @%:@ ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; esac dnl dnl A few 'make' implementations (e.g., NonStop OS and NextStep) dnl do not support nested variable expansions. dnl See automake bug#9928 and bug#10237. am_make=${MAKE-make} AC_CACHE_CHECK([whether $am_make supports nested variables], [am_cv_make_support_nested_variables], [if AS_ECHO([['TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi]) if test $am_cv_make_support_nested_variables = yes; then dnl Using '$V' instead of '$(V)' breaks IRIX make. AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AC_SUBST([AM_V])dnl AM_SUBST_NOTMAKE([AM_V])dnl AC_SUBST([AM_DEFAULT_V])dnl AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl AC_SUBST([AM_DEFAULT_VERBOSITY])dnl AM_BACKSLASH='\' AC_SUBST([AM_BACKSLASH])dnl _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl ]) # Copyright (C) 2001-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor 'install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in "make install-strip", and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # AM_SUBST_NOTMAKE(VARIABLE) # -------------------------- # Public sister of _AM_SUBST_NOTMAKE. AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of 'v7', 'ustar', or 'pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar # AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AC_SUBST([AMTAR], ['$${TAR-tar}']) # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' m4_if([$1], [v7], [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], [m4_case([$1], [ustar], [# The POSIX 1988 'ustar' format is defined with fixed-size fields. # There is notably a 21 bits limit for the UID and the GID. In fact, # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 # and bug#13588). am_max_uid=2097151 # 2^21 - 1 am_max_gid=$am_max_uid # The $UID and $GID variables are not portable, so we need to resort # to the POSIX-mandated id(1) utility. Errors in the 'id' calls # below are definitely unexpected, so allow the users to see them # (that is, avoid stderr redirection). am_uid=`id -u || echo unknown` am_gid=`id -g || echo unknown` AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) if test $am_uid -le $am_max_uid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) if test $am_gid -le $am_max_gid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi], [pax], [], [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Go ahead even if we have the value already cached. We do so because we # need to set the values for the 'am__tar' and 'am__untar' variables. _am_tools=${am_cv_prog_tar_$1-$_am_tools} for _am_tool in $_am_tools; do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works. rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR aptitude-robot-1.5.5/Makefile.am0000644000175000017500000000264213203347275013453 00000000000000## Makefile.am ## Process this file with automake to produce Makefile.in ## dist_sbin_SCRIPTS = aptitude-robot dist_sbin_SCRIPTS += aptitude-robot-session dist_pkgdata_SCRIPTS = random-delay dist_pkgdata_SCRIPTS += mail-log-on-error dist_pkgdata_SCRIPTS += xymon-report dist_pkgdata_DATA = reporting-helpers man_MANS = aptitude-robot.8 aptitude-robot-session.8 pkgconfdir = $(sysconfdir)/aptitude-robot pkglistdir = $(pkgconfdir)/pkglist.d optionsdir = $(pkgconfdir)/options.d triggerspredir = $(pkgconfdir)/triggers.pre triggerspostdir = $(pkgconfdir)/triggers.post dist_options_DATA = etc/aptitude-robot/options.d/10-remove-level-maximum dist_pkglist_DATA = etc/aptitude-robot/pkglist.d/README.txt dist_triggerspre_DATA = etc/aptitude-robot/triggers.pre/README.txt dist_triggerspost_DATA = etc/aptitude-robot/triggers.post/README.txt dist_triggerspost_SCRIPTS = etc/aptitude-robot/triggers.post/90-cleanup.example CLEANFILES = $(man_MANS) EXTRA_DIST = README.mdown TODO.mdown build-all t EXTRA_DIST += aptitude-robot-session.pod LICENSE EXTRA_DIST += CONTRIBUTING.mdown aptitude-robot.8: aptitude-robot pod2man -s 8 -c 'User Commands' -r "$(VERSION)" $< $@ aptitude-robot-session.8: aptitude-robot-session.pod pod2man -s 8 -c 'User Commands' -r "$(VERSION)" $< $@ check-local: TOPDIR=$(abs_top_srcdir) prove -I$(abs_top_srcdir) $(abs_top_srcdir)/t aptitude-robot-1.5.5/build-all0000755000175000017500000000045612412354663013213 00000000000000#!/bin/sh # vim: filetype=sh : set -e test -f ./configure.ac || (echo 'not in source directory' ; exit 1) autoreconf --force --install ./configure make make check make distcheck mv *.tar.gz ../$(echo *.tar.gz | sed -e 's/robot-/robot_/' -e 's/\.tar/.orig.tar/') make distclean debuild "$@" debclean