libgeotiff-1.7.4/0000775000175000017500000000000014755113373010651 500000000000000libgeotiff-1.7.4/geo_keyp.h0000664000175000017500000001010214020740032012515 00000000000000/********************************************************************** * * geo_keyp.h - private interface for GeoTIFF geokey tag parsing * * Written by: Niles D. Ritter * * copyright (c) 1995 Niles D. Ritter * * Permission granted to use this software, so long as this copyright * notice accompanies any products derived therefrom. **********************************************************************/ #ifndef LIBGEOTIFF_GEO_KEYP_H_ #define LIBGEOTIFF_GEO_KEYP_H_ #include /* for size_t */ #include "proj.h" /* * This structure contains the internal program * representation of the key entry. */ struct GeoKey { int gk_key; /* GeoKey ID */ size_t gk_size; /* data byte size */ tagtype_t gk_type; /* TIFF data type */ long gk_count; /* number of values */ char* gk_data; /* pointer to data, or value */ }; typedef struct GeoKey GeoKey; /* * This structure represents the file-organization of * the key entry. Note that it assumes that short entries * are aligned along 2-byte boundaries. */ struct KeyEntry { pinfo_t ent_key; /* GeoKey ID */ pinfo_t ent_location; /* TIFF Tag ID or 0 */ pinfo_t ent_count; /* GeoKey value count */ pinfo_t ent_val_offset; /* value or tag offset */ }; typedef struct KeyEntry KeyEntry; /* * This is the header of the CoordSystemInfoTag. The 'Version' * will only change if the CoorSystemInfoTag structure changes; * The Major Revision will be incremented whenever a new set of * Keys is added or changed, while the Minor revision will be * incremented when only the set of Key-values is increased. */ struct KeyHeader{ pinfo_t hdr_version; /* GeoTIFF Version */ pinfo_t hdr_rev_major; /* GeoKey Major Revision # */ pinfo_t hdr_rev_minor; /* GeoKey Minor Revision # */ pinfo_t hdr_num_keys; /* Number of GeoKeys */ }; typedef struct KeyHeader KeyHeader; /* * This structure holds temporary data while reading or writing * the tags. */ struct TempKeyData { char *tk_asciiParams; int tk_asciiParamsLength; int tk_asciiParamsOffset; }; typedef struct TempKeyData TempKeyData; struct gtiff; #ifndef GTIF_PRINT_FUNC_FORMAT #if defined(__GNUC__) && __GNUC__ >= 3 #define GTIF_PRINT_FUNC_FORMAT( format_idx, arg_idx ) __attribute__((__format__ (__printf__, format_idx, arg_idx))) #else #define GTIF_PRINT_FUNC_FORMAT( format_idx, arg_idx ) #endif #endif #ifndef GTERRORCALLBACK_DEFINED #define GTERRORCALLBACK_DEFINED /* Defined in both geotiff.h and geo_kep.h */ typedef void (*GTErrorCallback) (struct gtiff*, int level, const char* msg, ...) GTIF_PRINT_FUNC_FORMAT(3,4); #endif struct gtiff { tiff_t* gt_tif; /* TIFF file descriptor */ struct _TIFFMethod gt_methods; /* TIFF i/o methods */ int gt_flags; /* file flags */ pinfo_t gt_version; /* GeoTIFF Version */ pinfo_t gt_rev_major;/* GeoKey Key Revision */ pinfo_t gt_rev_minor;/* GeoKey Code Revision */ int gt_num_keys; /* number of keys */ GeoKey* gt_keys; /* array of keys */ int* gt_keyindex; /* index of a key, if set*/ int gt_keymin; /* smallest key set */ int gt_keymax; /* largest key set */ pinfo_t* gt_short; /* array of SHORT vals */ double* gt_double; /* array of DOUBLE vals */ int gt_nshorts; /* number of SHORT vals */ int gt_ndoubles; /* number of DOUBLE vals */ GTErrorCallback gt_error_callback; void* gt_user_data; PJ_CONTEXT *pj_context; /* PROJ context */ int own_pj_context; /* whether we own the PROJ context */ char szTmpBufferForGTIFValueNameEx[160]; }; typedef enum { FLAG_FILE_OPEN=1, FLAG_FILE_MODIFIED=2 } gtiff_flags; #define MAX_KEYINDEX 65535 /* largest possible key */ #define MAX_KEYS 100 /* maximum keys in a file */ #define MAX_VALUES 1000 /* maximum values in a tag */ #endif /* LIBGEOTIFF_GEO_KEYP_H_ */ libgeotiff-1.7.4/docs/0000775000175000017500000000000014755113373011601 500000000000000libgeotiff-1.7.4/docs/index.dox0000664000175000017500000000412214020740032013322 00000000000000/*! \page index
LIBGEOTIFF

Functions

General Notes

The libgeotiff library should compile cleanly with most ANSI-C or ANSI C++ compilers. All headers have appropriate extern "C" {} protection to ensure that entry points retain C linkage even if compiled with a C++ compiler.

Source Tree

The current CVS tree is available on the web. The source can be downloaded anonymously using the cvs checkout osrs/geotiff/libgeotiff command after logging in using the instructions on the remotesensing.org CVS howto page.

Include Files

Licensing

All the source code in this toolkit are either in the public domain, or under an X style license. In any event it is all considered to be free to use for any purpose (including commercial software). No credit is required though some of the code requires that the specific source code modules retain their existing copyright statements. In particular, no part of this code is copyleft, nor does it imply any requirement for users to disclose this or their own source code.

*/ libgeotiff-1.7.4/docs/geotifcp.html0000664000175000017500000000266414622755317014222 00000000000000 geotifcp - Copy TIFF, Installing GeoTIFF Metadata

geotifcp - Copy TIFF with updated GeoTIFF Metadata

Syntax:   geotifcp [options] [-e esri_worldfile] [-g metadata] input output
The program geotifcp is identical in function to the LIBTIFF program "tiffcp", with the additional feature that if the "-g " option is used the GeoTIFF information from the file will be installed into the output file. The "-e worldfile" option will override the tiepoint and scale information from the metadata file based on the contents of the ESRI worldfile.

If the "-g" option is not used the geotiff information from the source file is preserved in the new output file.

"geotifcp" inherits all the other file-transformation capabilities of the tiffcp program; for help on the additional parameters give the command:

  %  geotifcp -h
The metadata format is the same as is described in the listgeo program. Normally metadata files for use with geotifcp are generated from a similar file with listgeo, and then modified by hand as required.

See Also:

  1. listgeo - Dump GeoTIFF Metadata

  2. http://www.remotesensing.org/geotiff/geotiff.html - GeoTIFF/libgeotiff Home Page

libgeotiff-1.7.4/docs/Doxyfile0000664000175000017500000013231414020740032013212 00000000000000# Doxyfile 1.4.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project # # All text after a hash (#) is considered a comment and will be ignored # The format is: # TAG = value [value, ...] # For lists items can also be appended using: # TAG += value [value, ...] # Values that contain spaces should be placed between quotes (" ") #--------------------------------------------------------------------------- # Project related configuration options #--------------------------------------------------------------------------- # The PROJECT_NAME tag is a single word (or a sequence of words surrounded # by quotes) that should identify the project. PROJECT_NAME = $(PROJECT)-$(VERSION) # The PROJECT_NUMBER tag can be used to enter a project or revision number. # This could be handy for archiving the generated documentation or # if some version control system is used. PROJECT_NUMBER = # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) # base path where the generated documentation will be put. # If a relative path is entered, it will be relative to the location # where doxygen was started. If left blank the current directory will be used. OUTPUT_DIRECTORY = $(DOCDIR) # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. # The default language is English, other supported languages are: # Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, # Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, # Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, # Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, # Swedish, and Ukrainian. OUTPUT_LANGUAGE = English # This tag can be used to specify the encoding used in the generated output. # The encoding is not always determined by the language that is chosen, # but also whether or not the output is meant for Windows or non-Windows users. # In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES # forces the Windows encoding (this is the default for the Windows binary), # whereas setting the tag to NO uses a Unix-style encoding (the default for # all platforms other than Windows). USE_WINDOWS_ENCODING = NO # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will # include brief member descriptions after the members that are listed in # the file and class documentation (similar to JavaDoc). # Set to NO to disable this. BRIEF_MEMBER_DESC = YES # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend # the brief description of a member or function before the detailed description. # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the # brief descriptions will be completely suppressed. REPEAT_BRIEF = YES # This tag implements a quasi-intelligent brief description abbreviator # that is used to form the text in various listings. Each string # in this list, if found as the leading text of the brief description, will be # stripped from the text and the result after processing the whole list, is # used as the annotated text. Otherwise, the brief description is used as-is. # If left blank, the following values are used ("$name" is automatically # replaced with the name of the entity): "The $name class" "The $name widget" # "The $name file" "is" "provides" "specifies" "contains" # "represents" "a" "an" "the" ABBREVIATE_BRIEF = # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then # Doxygen will generate a detailed section even if there is only a brief # description. ALWAYS_DETAILED_SEC = NO # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all # inherited members of a class in the documentation of that class as if those # members were ordinary class members. Constructors, destructors and assignment # operators of the base classes will not be shown. INLINE_INHERITED_MEMB = NO # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full # path before files name in the file list and in the header files. If set # to NO the shortest path that makes the file name unique will be used. FULL_PATH_NAMES = NO # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of # the path mentioned in the documentation of a class, which tells # the reader which header file to include in order to use a class. # If left blank only the name of the header file containing the class # definition is used. Otherwise one should specify the include paths that # are normally passed to the compiler using the -I flag. STRIP_FROM_INC_PATH = $(SRCDIR) # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter # (but less readable) file names. This can be useful is your file systems # doesn't support long names like on DOS, Mac, or CD-ROM. SHORT_NAMES = NO # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen # will interpret the first line (until the first dot) of a JavaDoc-style # comment as the brief description. If set to NO, the JavaDoc # comments will behave just like the Qt-style comments (thus requiring an # explicit @brief command for a brief description. JAVADOC_AUTOBRIEF = YES # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen # treat a multi-line C++ special comment block (i.e. a block of //! or /// # comments) as a brief description. This used to be the default behaviour. # The new default is to treat a multi-line C++ comment block as a detailed # description. Set this tag to YES if you prefer the old behaviour instead. MULTILINE_CPP_IS_BRIEF = NO # If the DETAILS_AT_TOP tag is set to YES then Doxygen # will output the detailed description near the top, like JavaDoc. # If set to NO, the detailed description appears after the member # documentation. DETAILS_AT_TOP = NO # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented # member inherits the documentation from any documented member that it # re-implements. INHERIT_DOCS = YES # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC # tag is set to YES, then doxygen will reuse the documentation of the first # member in the group (if any) for the other members of the group. By default # all members of a group must be documented explicitly. DISTRIBUTE_GROUP_DOC = NO # The TAB_SIZE tag can be used to set the number of spaces in a tab. # Doxygen uses this value to replace tabs by spaces in code fragments. TAB_SIZE = 8 # This tag can be used to specify a number of aliases that acts # as commands in the documentation. An alias has the form "name=value". # For example adding "sideeffect=\par Side Effects:\n" will allow you to # put the command \sideeffect (or @sideeffect) in the documentation, which # will result in a user-defined paragraph with heading "Side Effects:". # You can put \n's in the value part of an alias to insert newlines. ALIASES = # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C # sources only. Doxygen will then generate output that is more tailored for C. # For instance, some of the names that are used will be different. The list # of all members will be omitted, etc. OPTIMIZE_OUTPUT_FOR_C = YES # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources # only. Doxygen will then generate output that is more tailored for Java. # For instance, namespaces will be presented as packages, qualified scopes # will look different, etc. OPTIMIZE_OUTPUT_JAVA = NO # Set the SUBGROUPING tag to YES (the default) to allow class member groups of # the same type (for instance a group of public functions) to be put as a # subgroup of that type (e.g. under the Public Functions section). Set it to # NO to prevent subgrouping. Alternatively, this can be done per class using # the \nosubgrouping command. SUBGROUPING = YES #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES EXTRACT_ALL = NO # If the EXTRACT_PRIVATE tag is set to YES all private members of a class # will be included in the documentation. EXTRACT_PRIVATE = NO # If the EXTRACT_STATIC tag is set to YES all static members of a file # will be included in the documentation. EXTRACT_STATIC = NO # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) # defined locally in source files will be included in the documentation. # If set to NO only classes defined in header files are included. EXTRACT_LOCAL_CLASSES = YES # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all # undocumented members of documented classes, files or namespaces. # If set to NO (the default) these members will be included in the # various overviews, but no documentation section is generated. # This option has no effect if EXTRACT_ALL is enabled. HIDE_UNDOC_MEMBERS = NO # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all # undocumented classes that are normally visible in the class hierarchy. # If set to NO (the default) these classes will be included in the various # overviews. This option has no effect if EXTRACT_ALL is enabled. HIDE_UNDOC_CLASSES = NO # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all # friend (class|struct|union) declarations. # If set to NO (the default) these declarations will be included in the # documentation. HIDE_FRIEND_COMPOUNDS = NO # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any # documentation blocks found inside the body of a function. # If set to NO (the default) these blocks will be appended to the # function's detailed documentation block. HIDE_IN_BODY_DOCS = NO # The INTERNAL_DOCS tag determines if documentation # that is typed after a \internal command is included. If the tag is set # to NO (the default) then the documentation will be excluded. # Set it to YES to include the internal documentation. INTERNAL_DOCS = NO # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate # file names in lower-case letters. If set to YES upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows # and Mac users are advised to set this option to NO. CASE_SENSE_NAMES = YES # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen # will show members with their full class and namespace scopes in the # documentation. If set to YES the scope will be hidden. HIDE_SCOPE_NAMES = NO # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen # will put a list of the files that are included by a file in the documentation # of that file. SHOW_INCLUDE_FILES = YES # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] # is inserted in the documentation for inline members. INLINE_INFO = YES # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen # will sort the (detailed) documentation of file and class members # alphabetically by member name. If set to NO the members will appear in # declaration order. SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the # brief documentation of file, namespace and class members alphabetically # by member name. If set to NO (the default) the members will appear in # declaration order. SORT_BRIEF_DOCS = NO # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be # sorted by fully-qualified names, including namespaces. If set to # NO (the default), the class list will be sorted only by class name, # not including the namespace part. # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. # Note: This option applies only to the class list, not to the # alphabetical list. SORT_BY_SCOPE_NAME = NO # The GENERATE_TODOLIST tag can be used to enable (YES) or # disable (NO) the todo list. This list is created by putting \todo # commands in the documentation. GENERATE_TODOLIST = YES # The GENERATE_TESTLIST tag can be used to enable (YES) or # disable (NO) the test list. This list is created by putting \test # commands in the documentation. GENERATE_TESTLIST = YES # The GENERATE_BUGLIST tag can be used to enable (YES) or # disable (NO) the bug list. This list is created by putting \bug # commands in the documentation. GENERATE_BUGLIST = YES # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or # disable (NO) the deprecated list. This list is created by putting # \deprecated commands in the documentation. GENERATE_DEPRECATEDLIST= YES # The ENABLED_SECTIONS tag can be used to enable conditional # documentation sections, marked by \if sectionname ... \endif. ENABLED_SECTIONS = # The MAX_INITIALIZER_LINES tag determines the maximum number of lines # the initial value of a variable or define consists of for it to appear in # the documentation. If the initializer consists of more lines than specified # here it will be hidden. Use a value of 0 to hide initializers completely. # The appearance of the initializer of individual variables and defines in the # documentation can be controlled using \showinitializer or \hideinitializer # command in the documentation regardless of this setting. MAX_INITIALIZER_LINES = 30 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated # at the bottom of the documentation of classes and structs. If set to YES the # list will mention the files that were used to generate the documentation. SHOW_USED_FILES = YES #--------------------------------------------------------------------------- # configuration options related to warning and progress messages #--------------------------------------------------------------------------- # The QUIET tag can be used to turn on/off the messages that are generated # by doxygen. Possible values are YES and NO. If left blank NO is used. QUIET = NO # The WARNINGS tag can be used to turn on/off the warning messages that are # generated by doxygen. Possible values are YES and NO. If left blank # NO is used. WARNINGS = YES # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings # for undocumented members. If EXTRACT_ALL is set to YES then this flag will # automatically be disabled. WARN_IF_UNDOCUMENTED = YES # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for # potential errors in the documentation, such as not documenting some # parameters in a documented function, or documenting parameters that # don't exist or using markup commands wrongly. WARN_IF_DOC_ERROR = YES # The WARN_FORMAT tag determines the format of the warning messages that # doxygen can produce. The string should contain the $file, $line, and $text # tags, which will be replaced by the file and line number from which the # warning originated and the warning text. Optionally the format may contain # $version, which will be replaced by the version of the file (if it could # be obtained via FILE_VERSION_FILTER) WARN_FORMAT = "$file:$line: $text" # The WARN_LOGFILE tag can be used to specify a file to which warning # and error messages should be written. If left blank the output is written # to stderr. WARN_LOGFILE = #--------------------------------------------------------------------------- # configuration options related to the input files #--------------------------------------------------------------------------- # The INPUT tag can be used to specify the files and/or directories that contain # documented source files. You may enter file names like "myfile.cpp" or # directories like "/usr/src/myproject". Separate the files or directories # with spaces. INPUT = $(SRCDIR) # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp # and *.h) to filter out the source-files in the directories. If left # blank the following patterns are tested: # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm FILE_PATTERNS = *.h \ *.cpp \ *.c \ *.dox # The RECURSIVE tag can be used to turn specify whether or not subdirectories # should be searched for input files as well. Possible values are YES and NO. # If left blank NO is used. RECURSIVE = YES # The EXCLUDE tag can be used to specify files and/or directories that should # excluded from the INPUT source files. This way you can easily exclude a # subdirectory from a directory tree whose root is specified with the INPUT tag. EXCLUDE = .svn # The EXCLUDE_SYMLINKS tag can be used select whether or not files or # directories that are symbolic links (a Unix filesystem feature) are excluded # from the input. EXCLUDE_SYMLINKS = NO # If the value of the INPUT tag contains directories, you can use the # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude # certain files from those directories. EXCLUDE_PATTERNS = # The EXAMPLE_PATH tag can be used to specify one or more files or # directories that contain example code fragments that are included (see # the \include command). EXAMPLE_PATH = $(SRCDIR) # If the value of the EXAMPLE_PATH tag contains directories, you can use the # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp # and *.h) to filter out the source-files in the directories. If left # blank all files are included. EXAMPLE_PATTERNS = # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be # searched for input files to be used with the \include or \dontinclude # commands irrespective of the value of the RECURSIVE tag. # Possible values are YES and NO. If left blank NO is used. EXAMPLE_RECURSIVE = NO # The IMAGE_PATH tag can be used to specify one or more files or # directories that contain image that are included in the documentation (see # the \image command). IMAGE_PATH = # The INPUT_FILTER tag can be used to specify a program that doxygen should # invoke to filter for each input file. Doxygen will invoke the filter program # by executing (via popen()) the command , where # is the value of the INPUT_FILTER tag, and is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. If FILTER_PATTERNS is specified, this tag will be # ignored. INPUT_FILTER = # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using # INPUT_FILTER) will be used to filter the input files when producing source # files to browse (i.e. when SOURCE_BROWSER is set to YES). FILTER_SOURCE_FILES = NO #--------------------------------------------------------------------------- # configuration options related to source browsing #--------------------------------------------------------------------------- # If the SOURCE_BROWSER tag is set to YES then a list of source files will # be generated. Documented entities will be cross-referenced with these sources. # Note: To get rid of all source code in the generated output, make sure also # VERBATIM_HEADERS is set to NO. SOURCE_BROWSER = NO # Setting the INLINE_SOURCES tag to YES will include the body # of functions and classes directly in the documentation. INLINE_SOURCES = YES # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code # fragments. Normal C and C++ comments will always remain visible. STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES (the default) # then for each documented function all documented # functions referencing it will be listed. REFERENCED_BY_RELATION = YES # If the REFERENCES_RELATION tag is set to YES (the default) # then for each documented function all documented entities # called/used by that function will be listed. REFERENCES_RELATION = YES # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen # will generate a verbatim copy of the header file for each class for # which an include is specified. Set to NO to disable this. VERBATIM_HEADERS = YES #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index # of all compounds will be generated. Enable this if the project # contains a lot of classes, structs, unions or interfaces. ALPHABETICAL_INDEX = NO # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns # in which this list will be split (can be a number in the range [1..20]) COLS_IN_ALPHA_INDEX = 5 # In case all classes in a project start with a common prefix, all # classes will be put under the same header in the alphabetical index. # The IGNORE_PREFIX tag can be used to specify one or more prefixes that # should be ignored while generating the index headers. IGNORE_PREFIX = #--------------------------------------------------------------------------- # configuration options related to the HTML output #--------------------------------------------------------------------------- # If the GENERATE_HTML tag is set to YES (the default) Doxygen will # generate HTML output. GENERATE_HTML = $(GENERATE_HTML) # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. # If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `html' will be used as the default path. HTML_OUTPUT = api # The HTML_FILE_EXTENSION tag can be used to specify the file extension for # each generated HTML page (for example: .htm,.php,.asp). If it is left blank # doxygen will generate files with .html extension. HTML_FILE_EXTENSION = .html # The HTML_HEADER tag can be used to specify a personal HTML header for # each generated HTML page. If it is left blank doxygen will generate a # standard header. HTML_HEADER = # The HTML_FOOTER tag can be used to specify a personal HTML footer for # each generated HTML page. If it is left blank doxygen will generate a # standard footer. HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to # fine-tune the look of the HTML output. If the tag is left blank doxygen # will generate a default style sheet. Note that doxygen will try to copy # the style sheet file to the HTML output directory, so don't put your own # stylesheet in the HTML output directory as well, or it will be erased! HTML_STYLESHEET = # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, # files or namespaces will be aligned in HTML using tables. If set to # NO a bullet list will be used. HTML_ALIGN_MEMBERS = YES # If the GENERATE_HTMLHELP tag is set to YES, additional index files # will be generated that can be used as input for tools like the # Microsoft HTML help workshop to generate a compressed HTML help file (.chm) # of the generated HTML documentation. GENERATE_HTMLHELP = $(GENERATE_CHM) # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can # be used to specify the file name of the resulting .chm file. You # can add a path in front of the file if the result should not be # written to the html output directory. CHM_FILE = ../$(PROJECT).chm # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can # be used to specify the location (absolute path including file name) of # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run # the HTML help compiler on the generated index.hhp. HHC_LOCATION = $(HHC_PATH) # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag # controls if a separate .chi index file is generated (YES) or that # it should be included in the master .chm file (NO). GENERATE_CHI = $(GENERATE_CHI) # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag # controls whether a binary table of contents is generated (YES) or a # normal table of contents (NO) in the .chm file. BINARY_TOC = NO # The TOC_EXPAND flag can be set to YES to add extra items for group members # to the contents of the HTML help documentation and to the tree view. TOC_EXPAND = NO # The DISABLE_INDEX tag can be used to turn on/off the condensed index at # top of each HTML page. The value NO (the default) enables the index and # the value YES disables it. DISABLE_INDEX = NO # This tag can be used to set the number of enum values (range [1..20]) # that doxygen will group on one line in the generated HTML documentation. ENUM_VALUES_PER_LINE = 4 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be # generated containing a tree-like index structure (just like the one that # is generated for HTML Help). For this to work a browser that supports # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are # probably better off using the HTML help feature. GENERATE_TREEVIEW = NO # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. TREEVIEW_WIDTH = 250 #--------------------------------------------------------------------------- # configuration options related to the LaTeX output #--------------------------------------------------------------------------- # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will # generate Latex output. GENERATE_LATEX = $(GENERATE_LATEX) # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. # If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `latex' will be used as the default path. LATEX_OUTPUT = # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. If left blank `latex' will be used as the default command name. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to # generate index for LaTeX. If left blank `makeindex' will be used as the # default command name. MAKEINDEX_CMD_NAME = makeindex # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact # LaTeX documents. This may be useful for small projects and may help to # save some trees in general. COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, a4wide, letter, legal and # executive. If left blank a4wide will be used. PAPER_TYPE = $(PAPER_SIZE) # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX # packages that should be included in the LaTeX output. EXTRA_PACKAGES = # The LATEX_HEADER tag can be used to specify a personal LaTeX header for # the generated latex document. The header should contain everything until # the first chapter. If it is left blank doxygen will generate a # standard header. Notice: only use this tag if you know what you are doing! LATEX_HEADER = # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references # This makes the output suitable for online browsing using a pdf viewer. PDF_HYPERLINKS = NO # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of # plain latex in the generated Makefile. Set this option to YES to get a # higher quality PDF documentation. USE_PDFLATEX = YES # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. # command to the generated LaTeX files. This will instruct LaTeX to keep # running if errors occur, instead of asking the user for help. # This option is also used when generating formulas in HTML. LATEX_BATCHMODE = YES # If LATEX_HIDE_INDICES is set to YES then doxygen will not # include the index chapters (such as File Index, Compound Index, etc.) # in the output. LATEX_HIDE_INDICES = NO #--------------------------------------------------------------------------- # configuration options related to the RTF output #--------------------------------------------------------------------------- # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output # The RTF output is optimized for Word 97 and may not look very pretty with # other RTF readers or editors. GENERATE_RTF = $(GENERATE_RTF) # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. # If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `rtf' will be used as the default path. RTF_OUTPUT = rtf # If the COMPACT_RTF tag is set to YES Doxygen generates more compact # RTF documents. This may be useful for small projects and may help to # save some trees in general. COMPACT_RTF = NO # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated # will contain hyperlink fields. The RTF file will # contain links (just like the HTML output) instead of page references. # This makes the output suitable for online browsing using WORD or other # programs which support those fields. # Note: wordpad (write) and others do not support links. RTF_HYPERLINKS = NO # Load stylesheet definitions from file. Syntax is similar to doxygen's # config file, i.e. a series of assignments. You only have to provide # replacements, missing definitions are set to their default value. RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an rtf document. # Syntax is similar to doxygen's config file. RTF_EXTENSIONS_FILE = #--------------------------------------------------------------------------- # configuration options related to the man page output #--------------------------------------------------------------------------- # If the GENERATE_MAN tag is set to YES (the default) Doxygen will # generate man pages GENERATE_MAN = $(GENERATE_MAN) # The MAN_OUTPUT tag is used to specify where the man pages will be put. # If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `man' will be used as the default path. MAN_OUTPUT = man # The MAN_EXTENSION tag determines the extension that is added to # the generated man pages (default is the subroutine's section .3) MAN_EXTENSION = .1 # If the MAN_LINKS tag is set to YES and Doxygen generates man output, # then it will generate one additional man file for each entity # documented in the real man page(s). These additional files # only source the real man page, but without them the man command # would be unable to find the correct page. The default is NO. MAN_LINKS = NO #--------------------------------------------------------------------------- # configuration options related to the XML output #--------------------------------------------------------------------------- # If the GENERATE_XML tag is set to YES Doxygen will # generate an XML file that captures the structure of # the code including all documentation. GENERATE_XML = $(GENERATE_XML) # The XML_OUTPUT tag is used to specify where the XML pages will be put. # If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `xml' will be used as the default path. XML_OUTPUT = xml # The XML_SCHEMA tag can be used to specify an XML schema, # which can be used by a validating XML parser to check the # syntax of the XML files. XML_SCHEMA = # The XML_DTD tag can be used to specify an XML DTD, # which can be used by a validating XML parser to check the # syntax of the XML files. XML_DTD = # If the XML_PROGRAMLISTING tag is set to YES Doxygen will # dump the program listings (including syntax highlighting # and cross-referencing information) to the XML output. Note that # enabling this will significantly increase the size of the XML output. XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will # generate an AutoGen Definitions (see autogen.sf.net) file # that captures the structure of the code including all # documentation. Note that this feature is still experimental # and incomplete at the moment. GENERATE_AUTOGEN_DEF = NO #--------------------------------------------------------------------------- # configuration options related to the Perl module output #--------------------------------------------------------------------------- # If the GENERATE_PERLMOD tag is set to YES Doxygen will # generate a Perl module file that captures the structure of # the code including all documentation. Note that this # feature is still experimental and incomplete at the # moment. GENERATE_PERLMOD = NO # If the PERLMOD_LATEX tag is set to YES Doxygen will generate # the necessary Makefile rules, Perl scripts and LaTeX code to be able # to generate PDF and DVI output from the Perl module output. PERLMOD_LATEX = NO # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be # nicely formatted so it can be parsed by a human reader. This is useful # if you want to understand what is going on. On the other hand, if this # tag is set to NO the size of the Perl module output will be much smaller # and Perl will parse it just the same. PERLMOD_PRETTY = YES # The names of the make variables in the generated doxyrules.make file # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. # This is useful so different doxyrules.make files included by the same # Makefile don't overwrite each other's variables. PERLMOD_MAKEVAR_PREFIX = #--------------------------------------------------------------------------- # Configuration options related to the preprocessor #--------------------------------------------------------------------------- # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will # evaluate all C-preprocessor directives found in the sources and include # files. ENABLE_PREPROCESSING = YES # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro # names in the source code. If set to NO (the default) only conditional # compilation will be performed. Macro expansion can be done in a controlled # way by setting EXPAND_ONLY_PREDEF to YES. MACRO_EXPANSION = YES # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES # then the macro expansion is limited to the macros specified with the # PREDEFINED and EXPAND_AS_PREDEFINED tags. EXPAND_ONLY_PREDEF = YES # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files # in the INCLUDE_PATH (see below) will be search if a #include is found. SEARCH_INCLUDES = YES # The INCLUDE_PATH tag can be used to specify one or more directories that # contain include files that are not input files but should be processed by # the preprocessor. INCLUDE_PATH = # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard # patterns (like *.h and *.hpp) to filter out the header-files in the # directories. If left blank, the patterns specified with FILE_PATTERNS will # be used. INCLUDE_FILE_PATTERNS = # The PREDEFINED tag can be used to specify one or more macro names that # are defined before the preprocessor is started (similar to the -D option of # gcc). The argument of the tag is a list of macros of the form: name # or name=definition (no spaces). If the definition and the = are # omitted =1 is assumed. To prevent a macro definition from being # undefined via #undef or recursively expanded use the := operator # instead of the = operator. PREDEFINED = # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then # this tag can be used to specify a list of macro names that should be expanded. # The macro definition that is found in the sources will be used. # Use the PREDEFINED tag if you want to use a different macro definition. EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then # doxygen's preprocessor will remove all function-like macros that are alone # on a line, have an all uppercase name, and do not end with a semicolon. Such # function macros are typically used for boiler-plate code, and will confuse # the parser if not removed. SKIP_FUNCTION_MACROS = YES #--------------------------------------------------------------------------- # Configuration::additions related to external references #--------------------------------------------------------------------------- # The TAGFILES option can be used to specify one or more tagfiles. # Optionally an initial location of the external documentation # can be added for each tagfile. The format of a tag file without # this location is as follows: # TAGFILES = file1 file2 ... # Adding location for the tag files is done as follows: # TAGFILES = file1=loc1 "file2 = loc2" ... # where "loc1" and "loc2" can be relative or absolute paths or # URLs. If a location is present for each tag, the installdox tool # does not have to be run to correct the links. # Note that each tag file must have a unique name # (where the name does NOT include the path) # If a tag file is not located in the directory in which doxygen # is run, you must also specify the path to the tagfile here. TAGFILES = # When a file name is specified after GENERATE_TAGFILE, doxygen will create # a tag file that is based on the input files it reads. GENERATE_TAGFILE = $(DOCDIR)/$(PROJECT).tag # If the ALLEXTERNALS tag is set to YES all external classes will be listed # in the class index. If set to NO only the inherited external classes # will be listed. ALLEXTERNALS = NO # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed # in the modules index. If set to NO, only the current project's groups will # be listed. EXTERNAL_GROUPS = YES # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). PERL_PATH = $(PERL_PATH) #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base # or super classes. Setting the tag to NO turns the diagrams off. Note that # this option is superseded by the HAVE_DOT option below. This is only a # fallback. It is recommended to install and use dot, since it yields more # powerful graphs. CLASS_DIAGRAMS = YES # If set to YES, the inheritance and collaboration graphs will hide # inheritance and usage relations if the target is undocumented # or is not a class. HIDE_UNDOC_RELATIONS = YES # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is # available from the path. This tool is part of Graphviz, a graph visualization # toolkit from AT&T and Lucent Bell Labs. The other options in this section # have no effect if this option is set to NO (the default) HAVE_DOT = $(HAVE_DOT) # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen # will generate a graph for each documented class showing the direct and # indirect inheritance relations. Setting this tag to YES will force the # the CLASS_DIAGRAMS tag to NO. CLASS_GRAPH = YES # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen # will generate a graph for each documented class showing the direct and # indirect implementation dependencies (inheritance, containment, and # class references variables) of the class with other documented classes. COLLABORATION_GRAPH = YES # If the UML_LOOK tag is set to YES doxygen will generate inheritance and # collaboration diagrams in a style similar to the OMG's Unified Modeling # Language. UML_LOOK = NO # If set to YES, the inheritance and collaboration graphs will show the # relations between templates and their instances. TEMPLATE_RELATIONS = NO # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT # tags are set to YES then doxygen will generate a graph for each documented # file showing the direct and indirect include dependencies of the file with # other documented files. INCLUDE_GRAPH = YES # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and # HAVE_DOT tags are set to YES then doxygen will generate a graph for each # documented header file showing the documented files that directly or # indirectly include this file. INCLUDED_BY_GRAPH = YES # If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will # generate a call dependency graph for every global function or class method. # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected # functions only using the \callgraph command. CALL_GRAPH = NO # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen # will graphical hierarchy of all classes instead of a textual one. GRAPHICAL_HIERARCHY = YES # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images # generated by dot. Possible values are png, jpg, or gif # If left blank png will be used. DOT_IMAGE_FORMAT = png # The tag DOT_PATH can be used to specify the path where the dot tool can be # found. If left blank, it is assumed the dot tool can be found in the path. DOT_PATH = $(DOT_PATH) # The DOTFILE_DIRS tag can be used to specify one or more directories that # contain dot files that are included in the documentation (see the # \dotfile command). DOTFILE_DIRS = # The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width # (in pixels) of the graphs generated by dot. If a graph becomes larger than # this value, doxygen will try to truncate the graph, so that it fits within # the specified constraint. Beware that most browsers cannot cope with very # large images. MAX_DOT_GRAPH_WIDTH = 1024 # The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height # (in pixels) of the graphs generated by dot. If a graph becomes larger than # this value, doxygen will try to truncate the graph, so that it fits within # the specified constraint. Beware that most browsers cannot cope with very # large images. MAX_DOT_GRAPH_HEIGHT = 1024 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the # graphs generated by dot. A depth value of 3 means that only nodes reachable # from the root by following a path via at most 3 edges will be shown. Nodes # that lay further from the root node will be omitted. Note that setting this # option to 1 or 2 may greatly reduce the computation time needed for large # code bases. Also note that a graph may be further truncated if the graph's # image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH # and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default), # the graph is not depth-constrained. MAX_DOT_GRAPH_DEPTH = 0 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will # generate a legend page explaining the meaning of the various boxes and # arrows in the dot generated graphs. GENERATE_LEGEND = YES # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will # remove the intermediate dot files that are used to generate # the various graphs. DOT_CLEANUP = YES #--------------------------------------------------------------------------- # Configuration::additions related to the search engine #--------------------------------------------------------------------------- # The SEARCHENGINE tag specifies whether or not a search engine should be # used. If set to NO the values of all tags below this one will be ignored. SEARCHENGINE = NO libgeotiff-1.7.4/docs/listgeo.html0000664000175000017500000001635614622755317014073 00000000000000 listgeo - Dump GeoTIFF Metadata

listgeo - Dump GeoTIFF Metadata


Usage: listgeo [-tfw] [-no_norm] [-proj4] [-t tabledir] inputfile
The program listgeo takes a GeoTIFF file as input and dumps to the standard output a GeoTIFF "metadata" file, which is human readable, and may also be used as input to other programs which use the "GTIFImport" routine, such as geotifcp.

The -tfw flag may be passed to force generation of an ESRI style .tfw file as well as the metadata file. The ESRI world file is always given the same basename as the input file, with the extension .tfw. If one exists already it will be overwritten.

The -no_norm flag will supress reporting of normalized parameters, and reporting of corner points.

The -proj4 flag forces listgeo to report the PROJ.4 projection string it uses for reprojecting corners to lat/long.

GeoTIFF Metadata Format

For the formalist junkies, we will define a GeoTIFF metadata format in an unambiguous fashion, and follow that by a concrete example.

The metadata format is defined as follows (all strings not placed between are string literals, case-sensitive, and any entry followed by "*" or "*" indicates multiple entries):

<Geotiff_Metadata> = <Geotiff_Header> + <GeoTIFF_Body> + <GeoTIFF_Trailer>

   <Geotiff_Header> = <White_Space> + Geotiff_Information: + <Return>
   <GeoTIFF_Trailer> = <White_Space> + End_Of_Geotiff. + <Return>
   <GeoTIFF_Body> = <GeoTIFF_Info> + <GeoTIFF_Tags> + <GeoTIFF_Keys>
      <GeoTIFF_Info> = <GeoTIFF_Version> + <GeoTIFF_Revision>
         <GeoTIFF_Version> = Version: + <Single_Space> + <Version> + <Return>
            <Version> = <Integer>
         <GeoTIFF_Revision> = Revision: +
               <Single_Space> + <Major_Rev> + <Period> + <Minor_Rev> + <Return>
               <Major_Rev> = <Integer>
               <Minor_Rev> = <Integer>
      <GeoTIFF_Tags> =  <Tag_Header> + <Tag_Entry>* + <Tag_Trailer>
         <Tag_Header> = <White_Space> + Tagged_Information: + <Return>
         <Tag_Trailer> = <White_Space> + End_Of_Tags. + <Return>
         <Tag_Entry> = <Tag_Entry_Header> + <Tag_Entry_Row>*
            <Tag_Entry_Header> = <White_Space> +
                     <Tag_Name> + <Tag_Dimension> + <Colon> + <Return>
               <Tag_Dimension>  = "(" + <NRows> + <Comma> + <NCols> + ")"
		 	      <NRows> = <Integer>
		 	      <NCols> = <Integer>
            <Tag_Entry_Row> = <White_Space> + <Double_Float>*<NCols> + <Return>
      <GeoTIFF_Keys> =  <Key_Header> + <Key_Entry>* + <Key_Trailer>
         <Key_Header> = <White_Space> + Keyed_Information: + <Return>
         <Key_Trailer> = <White_Space> + End_Of_Keys. + <Return>
         <Key_Entry> = <Key_Entry_Header> + <Key_Entry_Value>
            <Key_Entry_Header> = <White_Space> +
                     <Key_Name> + <Key_Dimension> + <Colon> + <Return>
              <Key_Dimension> = "(" + <Key_Format> + <Comma> + <Key_Count> + ")"
            <Key_Entry_Value> = (<Key_Value> | <Numeric_Value> | <Ascii_Value>)
               <Numeric_Value> = (<Integer> | <Double_Float>)
               <Ascii_Value> = <Double_Quote> + <String> + <Double_Quote>

   <Tag_Name> = All symbolic tag names defined in GeoTIFF spec.
   <Key_Name> = All symbolic key names defined in GeoTIFF spec.
   <Key_Value> = All symbolic value names defined in GeoTIFF spec.
   <Key_Format> = (Short | Ascii | Double)
And for the pedantic: 
   <White_Space> = (<Single_Space> | <Tab>)*
   <Double_Float> = <Mantissa><Exponent>
   <Mantissa> = <Sign><Integer><Period><Integer>
   <Exponent> = ( |e<Sign><Integer>)
   <Sign> = ( |+|-)
   <Integer> = (0|1|2|3|4|5|6|7|8|9)*
   ...
Following the formal metadata report, there is an optional (use -no_norm to supress) report on the normalized projection parameters for the file. This is an attempt to lookup PCS and GCS definitions to get detailed datum, ellipsoid, and projection definitions for the file. In general it requires access to the EPSG database provided by the PROJ library to work properly.

Following the normalized projection information listgeo will report the positions of the four corner coordinates, and if possible their lat/long equivelents. The corner coordinates are reported for tiepoint+scale and transformation matrix formulations of GeoTIFF files, but not for multiple tiepoint formulations. The lat/long coordinates are only available if listgeo is compiled with PROJ.4, if the projection definition can be normalized, and if it is a projection supported by the listgeo PROJ.4 binding.

Example (default output of listgeo):

Geotiff_Information:
   Version: 1
   Key_Revision: 1.0
   Tagged_Information:
      ModelTiepointTag (2,3):
         0                0                0
         440720           3751320          0
      ModelPixelScaleTag (1,3):
         60               60               0
      End_Of_Tags.
   Keyed_Information:
      GTModelTypeGeoKey (Short,1): ModelTypeProjected
      GTRasterTypeGeoKey (Short,1): RasterPixelIsArea
      GTCitationGeoKey (Ascii,17): "UTM    11 S E000"
      GeogLinearUnitsGeoKey (Short,1): Linear_Meter
      GeogAngularUnitsGeoKey (Short,1): Angular_Degree
      ProjectedCSTypeGeoKey (Short,1): PCS_NAD27_UTM_zone_11N
      End_Of_Keys.
   End_Of_Geotiff.

PCS = 26711 (NAD27 / UTM zone 11N)
Projection = 16011 (UTM zone 11N)
Projection Method: CT_TransverseMercator
   ProjNatOriginLatGeoKey: 0.000000 (  0d 0' 0.00"N)
   ProjNatOriginLongGeoKey: -117.000000 (117d 0' 0.00"W)
   ProjScaleAtNatOriginGeoKey: 0.999600
   ProjFalseEastingGeoKey: 500000.000000
   ProjFalseNorthingGeoKey: 0.000000
GCS: 4267/NAD27
Datum: 6267/North American Datum 1927
Ellipsoid: 7008/Clarke 1866 (6378206.40,6356583.80)
Prime Meridian: 8901/Greenwich (0.000000/  0d 0' 0.00"E)
Projection Linear Units: 9001/metre (1.000000m)

Corner Coordinates:
Upper Left    ( 440720.000,3751320.000)  (117d38'28.21"W, 33d54' 8.47"N)
Lower Left    ( 440720.000,3720600.000)  (117d38'20.79"W, 33d37'31.04"N)
Upper Right   ( 471440.000,3751320.000)  (117d18'32.07"W, 33d54'13.08"N)
Lower Right   ( 471440.000,3720600.000)  (117d18'28.50"W, 33d37'35.61"N)
Center        ( 456080.000,3735960.000)  (117d28'27.39"W, 33d45'52.46"N)

See Also:

  1. geotiffcp - Copy TIFF installing GeoTIFF metadata.

  2. http://www.remotesensing.org/geotiff/geotiff.html - GeoTIFF/libgeotiff Home Page

libgeotiff-1.7.4/docs/manual.txt0000664000175000017500000003763214622755317013555 00000000000000------------------------------------------------------------- Manual for Libgeotiff Library and Utilities ------------------------------------------------------------- Documentation Author: Niles Ritter Last Modified: 31 Jul 95 See: http://www.remotesensing.org/geotiff/api/index.html for up to date API documentation ------------------------------------------------------------- Contents: 1. The LibGeoTIFF library 1.1 Preliminaries 1.2 Calling Sequences 1.3 Examples 2. The LibGeoTIFF Utilities 2.1 listgeo - dump a GeoTIFF metadata file 2.2 geotifcp - install GeoTIFF from metadata ------------------------------------------------------------- 1. The LibGeoTIFF library ------------------------------------------------------------- 1.1 Preliminaries ------------------- 1.1.1 Compliance: ANSI-C: The GeoTIFF library is fully ANSI compliant and should compile under any ANSI compiler. It is not guaranteed to compile under K&R compilers. C++: All headers have the appropriate C++ bindings permitting the correct linkage to C++ routines. ------------------- 1.1.2 Interfaces: xtiffio.h: the primary interface header file for all TIFF routines, using the extended GeoTIFF tags. geotiffio.h: the primary interface header file for all GTIF routines, keys and code values. geotiff.h: an interface header file for all GTIF routines, if code values are not required. geokeys.h: defines all valid GEOTIFF GeoKeys. ------------------- 1.1.3 Defined macros: All of the tag, key and key-value symbolic names in the GeoTIFF spec are supported and defined by the inclusion of "geotiffio.h". In addition, the following useful values are defined: GvCurrentVersion: The current GeoTIFF Directory version. Should always be 1. GvCurrentRevision: The current GeoTIFF Key Revision. GvCurrentMinorRev: The current GeoTIFF Key-Value (minor) Revision. KvUndefined: The universal Key value for "undefined" items. KvUserDefined: The universal Key value for "user-defined" items. ------------------- 1.1.4 Defined Types: TIFF the type of a TIFF file descriptor (if LIBTIFF is used). GTIF the type of a GeoTIFF file descriptor. GTIFPrintMethod the type of a print method passed to GTIFPrint(). GTIFReadMethod the type of a read method passed to GTIFImport(). geokey_t the type of a GeoTIFF key variable. tagtype_t the type of a TIFF tag variable, such as TYPE_DOUBLE. ------------------- 1.1.5 Key and Code Databases: All geokeys are defined and named in the database file "geokeys.inc", which in turn is included in "geokeys.h" and several other files. The symbolic enumerated names are identical to those used in the Appendix of the GeoTIFF spec. The geokey code values are stored in the other database files having the ".inc" suffix, which in turn are all referenced by the file "geovalues.h". The ones with names beginning with "epsg_" are codes registered in the EPSG/POSC tables, while those beginning with "geo_" are specific to GeoTIFF. ------------------------------------------------------------- 1.2 Calling Sequences ------------------- 1.2.1 TIFF-level interface 1.2.1.1 GTIFNew -- Set up a new GeoTIFF file Descriptor GTIF* GTIFNew(void *tif); GTIFNew() takes an existing TIFF file descriptor and creates a GTIF GeoTIFF file-I/O object for reading and writing GeoTIFF keys and values. The TIFF file must currently be open, though it may be either read or write mode. 1.2.1.2 GTIFFree void GTIFFree(GTIF *gtif); Destroys the GeoTIFF file descriptor following reading or writing the keys. 1.2.1.3 GTIFWriteKeys int GTIFWriteKeys(GTIF *gtif); This routine must be called for a new GeoTIFF file after all of the desired Keys are defined and set with GTIFSetKey(). This does not explicitly write anything out to the file, but it does call the TIFF-level routines to install the TIFF tag values, which in turn are written to the file when the TIFF file descriptor is closed. A GeoTIFF file cannot be opened for updating; only pure read or write is supported. 1.2.1.4 GTIFDirectoryInfo void GTIFDirectoryInfo(GTIF *gtif, int *versions, int *keycount); Returns header information about the GeoTIFF file directory. The is an array of 3 integers, giving the GeoTIFF Version, followed by the major and minor revisions. The argument returns the number of keys currently defined in this file. ------------------- 1.2.2 GeoKey Access 1.2.2.1 GTIFKeyInfo int GTIFKeyInfo(GTIF *gtif, geokey_t key, int *size, tagtype_t* type); Returns the number of values defined for key if currently defined in the file, and returns in the size of individual key values, and the . If the key is not defined, 0 is returned. You may pass in NULL pointers to any parameters you do not need (such as the type). 1.2.2.1 GTIFKeyGet int GTIFKeyGet(GTIF *gtif, geokey_t key, void *val, int index, int count); Accesses the key value(s). If there are multiple values (such as ASCII), they may be accessed individually, starting at and returning values. The total number of values accessed is returned. Note: unline TIFFGetField() memory is not allocated for multiple-value arrays such as ASCII. To get the length of an array call GTIFKeyInfo first, which returns the size and count of the data. If the values are key-codes they should be declared of type "geocode_t", which is unsigned SHORT. 1.2.2.1 GTIFKeySet int GTIFKeySet(GTIF *gtif, geokey_t keyID, tagtype_t type, int count,...); Defines and sets the specified key values. Note that this does not install the tag-level information in the file; to do that you must call GTIFWriteKeys(). For single-valued non-ASCII keys (which are most of them), you must pass the values in by value not reference. You must use the correct type for the values: doubles for floating point, strings for ASCII, and "geocode_t" for SHORT codes (the symbolic names may be used in most cases). 1.2.3 Metadata Import-Export utilities void GTIFPrint(GTIF *gtif, GTIFPrintMethod print, void *fd); int GTIFImport(GTIF *gtif, GTIFReadMethod scan, void *fd); char* GTIFKeyName(geokey_t key); char* GTIFValueName(geokey_t key,int value); char* GTIFTypeName(tagtype_t type); char* GTIFTagName(int tag); int GTIFKeyCode(char * key); int GTIFValueCode(geokey_t key,char *value); int GTIFTypeCode(char *type); int GTIFTagCode(char *tag); The GTIFPrint() routine dumps a GeoTIFF metadata stream out to a specified file , either for human interpretation or for input to another program. If is NULL the data is written to the standard output. The GTIFImport() routine performs the inverse; given a metadata file specified by (or stdin if is NULL) install the corresponding tags and keys into the current GeoTIFF file. Note that the import routine only calls GTIFKeySet(), and so it is up to the client program to call GTIFWriteKey() in order to explicitly write the keys out to the file. The GTIFxxxName() routines all take a numeric code, key or tag and return a pointer to a static string name associated with the value. In the case of Key-Values, the key must be explicitly defined in order to establish the scope of the name-search. A string is always returned; however, if the code is not recognized the string is of the format "Unknown-%d", where %d is the input code value. The GTIFxxxCode() routines perform the reverse operation; given an ASCII string name it tries to find the corresponding code, key or tag numerical value, in a case-sensitive manner. If the string is not recognized the value -1 is return (no valid codes are negative). For consistency, any strings of the form "Unknown-%d" where %d is a decimal integer will return the specified integer. Note: be careful when assigning variables to GTIFxxxCode; for example, the geokey_t type is unsigned, and so if -1 is returned, this will result in a value of 65535. To be safe, always use signed integers for the assignment, and pass them on to an unsigned type after checking that the value is positive. ------------------------------------------------------------- 1.3 Examples A typical use of LIBGEOTIFF for creating a GeoTIFF file is #include "xtiffio.h" /* for TIFF */ #include "geotiffio.h" /* for GeoTIFF */ void main() { TIFF *tif=(TIFF*)0; /* TIFF-level descriptor */ GTIF *gtif=(GTIF*)0; /* GeoKey-level descriptor */ /* Open TIFF descriptor to write GeoTIFF tags */ tif=XTIFFOpen(fname,"w"); if (!tif) goto failure; /* Open GTIF Key parser */ gtif = GTIFNew(tif); if (!gtif) goto failure; /* Set up standar TIFF file */ TIFFSetField(tif,TIFFTAG_IMAGEWIDTH, WIDTH); /* set other TIFF tags and write out image ... */ /* Set GeoTIFF information */ GTIFKeySet(gtif, GTModelTypeGeoKey, TYPE_SHORT, 1, ModelGeographic); /* set other GeoTIFF keys ... */ /* Store the keys into the TIFF Tags */ GTIFWriteKeys(gtif); /* get rid of the key parser */ GTIFFree(gtif); /* save and close the TIFF file descriptor */ XTIFFClose(tif); exit (0); failure: exit (-1); } While a typical use of the code for reading tags is: #include "xtiffio.h" /* for TIFF */ #include "geotiffio.h" /* for GeoTIFF */ enum {VERSION=0,MAJOR,MINOR}; void main() { TIFF *tif=(TIFF*)0; /* TIFF-level descriptor */ GTIF *gtif=(GTIF*)0; /* GeoKey-level descriptor */ int versions[3]; int cit_length; geocode_t model; /* all key-codes are of this type */ char *citation; /* Open TIFF descriptor to read GeoTIFF tags */ tif=XTIFFOpen(fname,"r"); if (!tif) goto failure; /* Open GTIF Key parser; keys will be read at this time. */ gtif = GTIFNew(tif); if (!gtif) goto failure; /* Get the GeoTIFF directory info */ GTIFDirectoryInfo(gtif,versions,0); if (versions[MAJOR] > 1) { printf("this file is too new for me\n"); goto failure; } if (!GTIFKeyGet(gtif, GTModelTypeGeoKey, &model, 0, 1)) { printf("Yikes! no Model Type\n") goto failure; } /* ASCII keys are variable-length; compute size */ cit_length = GTIFKeyInfo(gtif,GTCitationGeoKey,&size,&type); if (cit_length > 0) { citation = malloc(size*cit_length); if (!citation) goto failure; GTIFKeyGet(gtif, GTCitationGeoKey, citation, 0, cit_length); printf("Citation:%s\n",citation); } /* Get some TIFF info on this image */ TIFFGetField(tif,TIFFTAG_IMAGEWIDTH, &width); /* get rid of the key parser */ GTIFFree(gtif); /* close the TIFF file descriptor */ XTIFFClose(tif); exit (0); failure: exit (-1); } ------------------------------------------------------------- 2. The LibGeoTIFF Utilities ------------------------------------------------------------- 2.1 listgeo - dump a GeoTIFF metadata file Syntax: listgeo [-tfw] [-no_norm] [-t tabledir] inputfile The program listgeo takes a GeoTIFF file as input and dumps to the standard output a GeoTIFF "metadata" file, which is human readable, and may also be used as input to other programs which use the "GTIFImport" routine, such as geotifcp, below. The -tfw flag may be passed to force generation of an ESRI style .tfw file as well as the metadata file. The -no_norm flag will supress reporting of normalized parameters, and reporting of corner points. ------------------------ GeoTIFF Metadata Format: For the formalist junkies, we will define a GeoTIFF metadata format in an unambiguous fashion, and follow that by a concrete example. The metadata format is defined as follows (all strings not placed between are string literals, case-sensitive, and any entry followed by "*" or "*" indicates multiple entries): = + + = + Geotiff_Information: + = + End_Of_Geotiff. + = + + = + = Version: + + + = = Revision: + + + + + = = = + * + = + Tagged_Information: + = + End_Of_Tags. + = + * = + + + + = "(" + + + + ")" = = = + * + = + * + = + Keyed_Information: + = + End_Of_Keys. + = + = + + + + = "(" + + + + ")" = ( | | ) = ( | ) = + + = All symbolic tag names defined in GeoTIFF spec. = All symbolic key names defined in GeoTIFF spec. = All symbolic value names defined in GeoTIFF spec. = (Short | Ascii | Double) And for the pedantic: = ( | )* = = = ( |e) = ( |+|-) = (0|1|2|3|4|5|6|7|8|9)* ... Example (default output of listgeo): Geotiff_Information: Version: 1 Key_Revision: 0.2 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 130 32 0 ModelPixelScaleTag (1,3): 1 1 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeGeographic GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,16): "Just An Example" GeographicTypeGeoKey (Short,1): User-Defined GeogCitationGeoKey (Ascii,24): "Everest Ellipsoid Used." GeogGeodeticDatumGeoKey (Short,1): User-Defined GeogLinearUnitsGeoKey (Short,1): Linear_Meter GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogEllipsoidGeoKey (Short,1): Ellipse_Everest_1830_1967_Definition GeogSemiMajorAxisGeoKey (Double,1): 6377298.556 GeogInvFlatteningGeoKey (Double,1): 300.8017 End_Of_Keys. End_Of_Geotiff. ------------------------------------------------------------- 2.2 geotifcp - Copy a TIFF file and install GeoTIFF info from metadata. Syntax: geotifcp [options] [-e esri_worldfile] [-g metadata] input output The program geotifcp is identical in function to the LIBTIFF program "tiffcp", with the additional feature that if the "-g " option is used the GeoTIFF information from the file will be installed into the output file. The "-e worldfile" option will override the tiepoint and scale information from the metadata file based on the contents of the ESRI worldfile. If the "-g" option is not used, the opposite effect occurs: all GeoTIFF information is filtered out of the input file before being written to the new output file. "geotifcp" inherits all the other file-transformation capabilities of the tiffcp program; for help on the additional parameters give the command: % geotifcp -h ------------------------------------------------------------- libgeotiff-1.7.4/ltmain.sh0000644000175000017500000117716714755113347012434 00000000000000#! /bin/sh ## DO NOT EDIT - This file generated from ./build-aux/ltmain.in ## by inline-source v2014-01-03.01 # libtool (GNU libtool) 2.4.6 # Provide generalized library-building support services. # Written by Gordon Matzigkeit , 1996 # Copyright (C) 1996-2015 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . PROGRAM=libtool PACKAGE=libtool VERSION="2.4.6 Debian-2.4.6-14" package_revision=2.4.6 ## ------ ## ## Usage. ## ## ------ ## # Run './libtool --help' for help with using this script from the # command line. ## ------------------------------- ## ## User overridable command paths. ## ## ------------------------------- ## # After configure completes, it has a better idea of some of the # shell tools we need than the defaults used by the functions shared # with bootstrap, so set those here where they can still be over- # ridden by the user, but otherwise take precedence. : ${AUTOCONF="autoconf"} : ${AUTOMAKE="automake"} ## -------------------------- ## ## Source external libraries. ## ## -------------------------- ## # Much of our low-level functionality needs to be sourced from external # libraries, which are installed to $pkgauxdir. # Set a version string for this script. scriptversion=2015-01-20.17; # UTC # General shell script boiler plate, and helper functions. # Written by Gary V. Vaughan, 2004 # Copyright (C) 2004-2015 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # As a special exception to the GNU General Public License, if you distribute # this file as part of a program or library that is built using GNU Libtool, # you may include this file under the same distribution terms that you use # for the rest of that program. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # Please report bugs or propose patches to gary@gnu.org. ## ------ ## ## Usage. ## ## ------ ## # Evaluate this file near the top of your script to gain access to # the functions and variables defined here: # # . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh # # If you need to override any of the default environment variable # settings, do that before evaluating this file. ## -------------------- ## ## Shell normalisation. ## ## -------------------- ## # Some shells need a little help to be as Bourne compatible as possible. # Before doing anything else, make sure all that help has been provided! DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi # NLS nuisances: We save the old values in case they are required later. _G_user_locale= _G_safe_locale= for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test set = \"\${$_G_var+set}\"; then save_$_G_var=\$$_G_var $_G_var=C export $_G_var _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\" _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\" fi" done # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # Make sure IFS has a sensible default sp=' ' nl=' ' IFS="$sp $nl" # There are apparently some retarded systems that use ';' as a PATH separator! if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi ## ------------------------- ## ## Locate command utilities. ## ## ------------------------- ## # func_executable_p FILE # ---------------------- # Check that FILE is an executable regular file. func_executable_p () { test -f "$1" && test -x "$1" } # func_path_progs PROGS_LIST CHECK_FUNC [PATH] # -------------------------------------------- # Search for either a program that responds to --version with output # containing "GNU", or else returned by CHECK_FUNC otherwise, by # trying all the directories in PATH with each of the elements of # PROGS_LIST. # # CHECK_FUNC should accept the path to a candidate program, and # set $func_check_prog_result if it truncates its output less than # $_G_path_prog_max characters. func_path_progs () { _G_progs_list=$1 _G_check_func=$2 _G_PATH=${3-"$PATH"} _G_path_prog_max=0 _G_path_prog_found=false _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:} for _G_dir in $_G_PATH; do IFS=$_G_save_IFS test -z "$_G_dir" && _G_dir=. for _G_prog_name in $_G_progs_list; do for _exeext in '' .EXE; do _G_path_prog=$_G_dir/$_G_prog_name$_exeext func_executable_p "$_G_path_prog" || continue case `"$_G_path_prog" --version 2>&1` in *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;; *) $_G_check_func $_G_path_prog func_path_progs_result=$func_check_prog_result ;; esac $_G_path_prog_found && break 3 done done done IFS=$_G_save_IFS test -z "$func_path_progs_result" && { echo "no acceptable sed could be found in \$PATH" >&2 exit 1 } } # We want to be able to use the functions in this file before configure # has figured out where the best binaries are kept, which means we have # to search for them ourselves - except when the results are already set # where we skip the searches. # Unless the user overrides by setting SED, search the path for either GNU # sed, or the sed that truncates its output the least. test -z "$SED" && { _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ for _G_i in 1 2 3 4 5 6 7; do _G_sed_script=$_G_sed_script$nl$_G_sed_script done echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed _G_sed_script= func_check_prog_sed () { _G_path_prog=$1 _G_count=0 printf 0123456789 >conftest.in while : do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo '' >> conftest.nl "$_G_path_prog" -f conftest.sed conftest.out 2>/dev/null || break diff conftest.out conftest.nl >/dev/null 2>&1 || break _G_count=`expr $_G_count + 1` if test "$_G_count" -gt "$_G_path_prog_max"; then # Best one so far, save it but keep looking for a better one func_check_prog_result=$_G_path_prog _G_path_prog_max=$_G_count fi # 10*(2^10) chars as input seems more than enough test 10 -lt "$_G_count" && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out } func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin rm -f conftest.sed SED=$func_path_progs_result } # Unless the user overrides by setting GREP, search the path for either GNU # grep, or the grep that truncates its output the least. test -z "$GREP" && { func_check_prog_grep () { _G_path_prog=$1 _G_count=0 _G_path_prog_max=0 printf 0123456789 >conftest.in while : do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo 'GREP' >> conftest.nl "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' conftest.out 2>/dev/null || break diff conftest.out conftest.nl >/dev/null 2>&1 || break _G_count=`expr $_G_count + 1` if test "$_G_count" -gt "$_G_path_prog_max"; then # Best one so far, save it but keep looking for a better one func_check_prog_result=$_G_path_prog _G_path_prog_max=$_G_count fi # 10*(2^10) chars as input seems more than enough test 10 -lt "$_G_count" && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out } func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin GREP=$func_path_progs_result } ## ------------------------------- ## ## User overridable command paths. ## ## ------------------------------- ## # All uppercase variable names are used for environment variables. These # variables can be overridden by the user before calling a script that # uses them if a suitable command of that name is not already available # in the command search PATH. : ${CP="cp -f"} : ${ECHO="printf %s\n"} : ${EGREP="$GREP -E"} : ${FGREP="$GREP -F"} : ${LN_S="ln -s"} : ${MAKE="make"} : ${MKDIR="mkdir"} : ${MV="mv -f"} : ${RM="rm -f"} : ${SHELL="${CONFIG_SHELL-/bin/sh}"} ## -------------------- ## ## Useful sed snippets. ## ## -------------------- ## sed_dirname='s|/[^/]*$||' sed_basename='s|^.*/||' # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. sed_quote_subst='s|\([`"$\\]\)|\\\1|g' # Same as above, but do not quote variable references. sed_double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution that turns a string into a regex matching for the # string literally. sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g' # Sed substitution that converts a w32 file name or path # that contains forward slashes, into one that contains # (escaped) backslashes. A very naive implementation. sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' # Re-'\' parameter expansions in output of sed_double_quote_subst that # were '\'-ed in input to the same. If an odd number of '\' preceded a # '$' in input to sed_double_quote_subst, that '$' was protected from # expansion. Since each input '\' is now two '\'s, look for any number # of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'. _G_bs='\\' _G_bs2='\\\\' _G_bs4='\\\\\\\\' _G_dollar='\$' sed_double_backslash="\ s/$_G_bs4/&\\ /g s/^$_G_bs2$_G_dollar/$_G_bs&/ s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g s/\n//g" ## ----------------- ## ## Global variables. ## ## ----------------- ## # Except for the global variables explicitly listed below, the following # functions in the '^func_' namespace, and the '^require_' namespace # variables initialised in the 'Resource management' section, sourcing # this file will not pollute your global namespace with anything # else. There's no portable way to scope variables in Bourne shell # though, so actually running these functions will sometimes place # results into a variable named after the function, and often use # temporary variables in the '^_G_' namespace. If you are careful to # avoid using those namespaces casually in your sourcing script, things # should continue to work as you expect. And, of course, you can freely # overwrite any of the functions or variables defined here before # calling anything to customize them. EXIT_SUCCESS=0 EXIT_FAILURE=1 EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. # Allow overriding, eg assuming that you follow the convention of # putting '$debug_cmd' at the start of all your functions, you can get # bash to show function call trace with: # # debug_cmd='echo "${FUNCNAME[0]} $*" >&2' bash your-script-name debug_cmd=${debug_cmd-":"} exit_cmd=: # By convention, finish your script with: # # exit $exit_status # # so that you can set exit_status to non-zero if you want to indicate # something went wrong during execution without actually bailing out at # the point of failure. exit_status=$EXIT_SUCCESS # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh # is ksh but when the shell is invoked as "sh" and the current value of # the _XPG environment variable is not equal to 1 (one), the special # positional parameter $0, within a function call, is the name of the # function. progpath=$0 # The name of this program. progname=`$ECHO "$progpath" |$SED "$sed_basename"` # Make sure we have an absolute progpath for reexecution: case $progpath in [\\/]*|[A-Za-z]:\\*) ;; *[\\/]*) progdir=`$ECHO "$progpath" |$SED "$sed_dirname"` progdir=`cd "$progdir" && pwd` progpath=$progdir/$progname ;; *) _G_IFS=$IFS IFS=${PATH_SEPARATOR-:} for progdir in $PATH; do IFS=$_G_IFS test -x "$progdir/$progname" && break done IFS=$_G_IFS test -n "$progdir" || progdir=`pwd` progpath=$progdir/$progname ;; esac ## ----------------- ## ## Standard options. ## ## ----------------- ## # The following options affect the operation of the functions defined # below, and should be set appropriately depending on run-time para- # meters passed on the command line. opt_dry_run=false opt_quiet=false opt_verbose=false # Categories 'all' and 'none' are always available. Append any others # you will pass as the first argument to func_warning from your own # code. warning_categories= # By default, display warnings according to 'opt_warning_types'. Set # 'warning_func' to ':' to elide all warnings, or func_fatal_error to # treat the next displayed warning as a fatal error. warning_func=func_warn_and_continue # Set to 'all' to display all warnings, 'none' to suppress all # warnings, or a space delimited list of some subset of # 'warning_categories' to display only the listed warnings. opt_warning_types=all ## -------------------- ## ## Resource management. ## ## -------------------- ## # This section contains definitions for functions that each ensure a # particular resource (a file, or a non-empty configuration variable for # example) is available, and if appropriate to extract default values # from pertinent package files. Call them using their associated # 'require_*' variable to ensure that they are executed, at most, once. # # It's entirely deliberate that calling these functions can set # variables that don't obey the namespace limitations obeyed by the rest # of this file, in order that that they be as useful as possible to # callers. # require_term_colors # ------------------- # Allow display of bold text on terminals that support it. require_term_colors=func_require_term_colors func_require_term_colors () { $debug_cmd test -t 1 && { # COLORTERM and USE_ANSI_COLORS environment variables take # precedence, because most terminfo databases neglect to describe # whether color sequences are supported. test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"} if test 1 = "$USE_ANSI_COLORS"; then # Standard ANSI escape sequences tc_reset='' tc_bold=''; tc_standout='' tc_red=''; tc_green='' tc_blue=''; tc_cyan='' else # Otherwise trust the terminfo database after all. test -n "`tput sgr0 2>/dev/null`" && { tc_reset=`tput sgr0` test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold` tc_standout=$tc_bold test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso` test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1` test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2` test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4` test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5` } fi } require_term_colors=: } ## ----------------- ## ## Function library. ## ## ----------------- ## # This section contains a variety of useful functions to call in your # scripts. Take note of the portable wrappers for features provided by # some modern shells, which will fall back to slower equivalents on # less featureful shells. # func_append VAR VALUE # --------------------- # Append VALUE onto the existing contents of VAR. # We should try to minimise forks, especially on Windows where they are # unreasonably slow, so skip the feature probes when bash or zsh are # being used: if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then : ${_G_HAVE_ARITH_OP="yes"} : ${_G_HAVE_XSI_OPS="yes"} # The += operator was introduced in bash 3.1 case $BASH_VERSION in [12].* | 3.0 | 3.0*) ;; *) : ${_G_HAVE_PLUSEQ_OP="yes"} ;; esac fi # _G_HAVE_PLUSEQ_OP # Can be empty, in which case the shell is probed, "yes" if += is # useable or anything else if it does not work. test -z "$_G_HAVE_PLUSEQ_OP" \ && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \ && _G_HAVE_PLUSEQ_OP=yes if test yes = "$_G_HAVE_PLUSEQ_OP" then # This is an XSI compatible shell, allowing a faster implementation... eval 'func_append () { $debug_cmd eval "$1+=\$2" }' else # ...otherwise fall back to using expr, which is often a shell builtin. func_append () { $debug_cmd eval "$1=\$$1\$2" } fi # func_append_quoted VAR VALUE # ---------------------------- # Quote VALUE and append to the end of shell variable VAR, separated # by a space. if test yes = "$_G_HAVE_PLUSEQ_OP"; then eval 'func_append_quoted () { $debug_cmd func_quote_for_eval "$2" eval "$1+=\\ \$func_quote_for_eval_result" }' else func_append_quoted () { $debug_cmd func_quote_for_eval "$2" eval "$1=\$$1\\ \$func_quote_for_eval_result" } fi # func_append_uniq VAR VALUE # -------------------------- # Append unique VALUE onto the existing contents of VAR, assuming # entries are delimited by the first character of VALUE. For example: # # func_append_uniq options " --another-option option-argument" # # will only append to $options if " --another-option option-argument " # is not already present somewhere in $options already (note spaces at # each end implied by leading space in second argument). func_append_uniq () { $debug_cmd eval _G_current_value='`$ECHO $'$1'`' _G_delim=`expr "$2" : '\(.\)'` case $_G_delim$_G_current_value$_G_delim in *"$2$_G_delim"*) ;; *) func_append "$@" ;; esac } # func_arith TERM... # ------------------ # Set func_arith_result to the result of evaluating TERMs. test -z "$_G_HAVE_ARITH_OP" \ && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \ && _G_HAVE_ARITH_OP=yes if test yes = "$_G_HAVE_ARITH_OP"; then eval 'func_arith () { $debug_cmd func_arith_result=$(( $* )) }' else func_arith () { $debug_cmd func_arith_result=`expr "$@"` } fi # func_basename FILE # ------------------ # Set func_basename_result to FILE with everything up to and including # the last / stripped. if test yes = "$_G_HAVE_XSI_OPS"; then # If this shell supports suffix pattern removal, then use it to avoid # forking. Hide the definitions single quotes in case the shell chokes # on unsupported syntax... _b='func_basename_result=${1##*/}' _d='case $1 in */*) func_dirname_result=${1%/*}$2 ;; * ) func_dirname_result=$3 ;; esac' else # ...otherwise fall back to using sed. _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`' _d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"` if test "X$func_dirname_result" = "X$1"; then func_dirname_result=$3 else func_append func_dirname_result "$2" fi' fi eval 'func_basename () { $debug_cmd '"$_b"' }' # func_dirname FILE APPEND NONDIR_REPLACEMENT # ------------------------------------------- # Compute the dirname of FILE. If nonempty, add APPEND to the result, # otherwise set result to NONDIR_REPLACEMENT. eval 'func_dirname () { $debug_cmd '"$_d"' }' # func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT # -------------------------------------------------------- # Perform func_basename and func_dirname in a single function # call: # dirname: Compute the dirname of FILE. If nonempty, # add APPEND to the result, otherwise set result # to NONDIR_REPLACEMENT. # value returned in "$func_dirname_result" # basename: Compute filename of FILE. # value retuned in "$func_basename_result" # For efficiency, we do not delegate to the functions above but instead # duplicate the functionality here. eval 'func_dirname_and_basename () { $debug_cmd '"$_b"' '"$_d"' }' # func_echo ARG... # ---------------- # Echo program name prefixed message. func_echo () { $debug_cmd _G_message=$* func_echo_IFS=$IFS IFS=$nl for _G_line in $_G_message; do IFS=$func_echo_IFS $ECHO "$progname: $_G_line" done IFS=$func_echo_IFS } # func_echo_all ARG... # -------------------- # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "$*" } # func_echo_infix_1 INFIX ARG... # ------------------------------ # Echo program name, followed by INFIX on the first line, with any # additional lines not showing INFIX. func_echo_infix_1 () { $debug_cmd $require_term_colors _G_infix=$1; shift _G_indent=$_G_infix _G_prefix="$progname: $_G_infix: " _G_message=$* # Strip color escape sequences before counting printable length for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan" do test -n "$_G_tc" && { _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"` _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"` } done _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes func_echo_infix_1_IFS=$IFS IFS=$nl for _G_line in $_G_message; do IFS=$func_echo_infix_1_IFS $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2 _G_prefix=$_G_indent done IFS=$func_echo_infix_1_IFS } # func_error ARG... # ----------------- # Echo program name prefixed message to standard error. func_error () { $debug_cmd $require_term_colors func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2 } # func_fatal_error ARG... # ----------------------- # Echo program name prefixed message to standard error, and exit. func_fatal_error () { $debug_cmd func_error "$*" exit $EXIT_FAILURE } # func_grep EXPRESSION FILENAME # ----------------------------- # Check whether EXPRESSION matches any line of FILENAME, without output. func_grep () { $debug_cmd $GREP "$1" "$2" >/dev/null 2>&1 } # func_len STRING # --------------- # Set func_len_result to the length of STRING. STRING may not # start with a hyphen. test -z "$_G_HAVE_XSI_OPS" \ && (eval 'x=a/b/c; test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ && _G_HAVE_XSI_OPS=yes if test yes = "$_G_HAVE_XSI_OPS"; then eval 'func_len () { $debug_cmd func_len_result=${#1} }' else func_len () { $debug_cmd func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` } fi # func_mkdir_p DIRECTORY-PATH # --------------------------- # Make sure the entire path to DIRECTORY-PATH is available. func_mkdir_p () { $debug_cmd _G_directory_path=$1 _G_dir_list= if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then # Protect directory names starting with '-' case $_G_directory_path in -*) _G_directory_path=./$_G_directory_path ;; esac # While some portion of DIR does not yet exist... while test ! -d "$_G_directory_path"; do # ...make a list in topmost first order. Use a colon delimited # list incase some portion of path contains whitespace. _G_dir_list=$_G_directory_path:$_G_dir_list # If the last portion added has no slash in it, the list is done case $_G_directory_path in */*) ;; *) break ;; esac # ...otherwise throw away the child directory and loop _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"` done _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'` func_mkdir_p_IFS=$IFS; IFS=: for _G_dir in $_G_dir_list; do IFS=$func_mkdir_p_IFS # mkdir can fail with a 'File exist' error if two processes # try to create one of the directories concurrently. Don't # stop in that case! $MKDIR "$_G_dir" 2>/dev/null || : done IFS=$func_mkdir_p_IFS # Bail out if we (or some other process) failed to create a directory. test -d "$_G_directory_path" || \ func_fatal_error "Failed to create '$1'" fi } # func_mktempdir [BASENAME] # ------------------------- # Make a temporary directory that won't clash with other running # libtool processes, and avoids race conditions if possible. If # given, BASENAME is the basename for that directory. func_mktempdir () { $debug_cmd _G_template=${TMPDIR-/tmp}/${1-$progname} if test : = "$opt_dry_run"; then # Return a directory name, but don't create it in dry-run mode _G_tmpdir=$_G_template-$$ else # If mktemp works, use that first and foremost _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null` if test ! -d "$_G_tmpdir"; then # Failing that, at least try and use $RANDOM to avoid a race _G_tmpdir=$_G_template-${RANDOM-0}$$ func_mktempdir_umask=`umask` umask 0077 $MKDIR "$_G_tmpdir" umask $func_mktempdir_umask fi # If we're not in dry-run mode, bomb out on failure test -d "$_G_tmpdir" || \ func_fatal_error "cannot create temporary directory '$_G_tmpdir'" fi $ECHO "$_G_tmpdir" } # func_normal_abspath PATH # ------------------------ # Remove doubled-up and trailing slashes, "." path components, # and cancel out any ".." path components in PATH after making # it an absolute path. func_normal_abspath () { $debug_cmd # These SED scripts presuppose an absolute path with a trailing slash. _G_pathcar='s|^/\([^/]*\).*$|\1|' _G_pathcdr='s|^/[^/]*||' _G_removedotparts=':dotsl s|/\./|/|g t dotsl s|/\.$|/|' _G_collapseslashes='s|/\{1,\}|/|g' _G_finalslash='s|/*$|/|' # Start from root dir and reassemble the path. func_normal_abspath_result= func_normal_abspath_tpath=$1 func_normal_abspath_altnamespace= case $func_normal_abspath_tpath in "") # Empty path, that just means $cwd. func_stripname '' '/' "`pwd`" func_normal_abspath_result=$func_stripname_result return ;; # The next three entries are used to spot a run of precisely # two leading slashes without using negated character classes; # we take advantage of case's first-match behaviour. ///*) # Unusual form of absolute path, do nothing. ;; //*) # Not necessarily an ordinary path; POSIX reserves leading '//' # and for example Cygwin uses it to access remote file shares # over CIFS/SMB, so we conserve a leading double slash if found. func_normal_abspath_altnamespace=/ ;; /*) # Absolute path, do nothing. ;; *) # Relative path, prepend $cwd. func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath ;; esac # Cancel out all the simple stuff to save iterations. We also want # the path to end with a slash for ease of parsing, so make sure # there is one (and only one) here. func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"` while :; do # Processed it all yet? if test / = "$func_normal_abspath_tpath"; then # If we ascended to the root using ".." the result may be empty now. if test -z "$func_normal_abspath_result"; then func_normal_abspath_result=/ fi break fi func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$_G_pathcar"` func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$_G_pathcdr"` # Figure out what to do with it case $func_normal_abspath_tcomponent in "") # Trailing empty path component, ignore it. ;; ..) # Parent dir; strip last assembled component from result. func_dirname "$func_normal_abspath_result" func_normal_abspath_result=$func_dirname_result ;; *) # Actual path component, append it. func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent" ;; esac done # Restore leading double-slash if one was found on entry. func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result } # func_notquiet ARG... # -------------------- # Echo program name prefixed message only when not in quiet mode. func_notquiet () { $debug_cmd $opt_quiet || func_echo ${1+"$@"} # A bug in bash halts the script if the last line of a function # fails when set -e is in force, so we need another command to # work around that: : } # func_relative_path SRCDIR DSTDIR # -------------------------------- # Set func_relative_path_result to the relative path from SRCDIR to DSTDIR. func_relative_path () { $debug_cmd func_relative_path_result= func_normal_abspath "$1" func_relative_path_tlibdir=$func_normal_abspath_result func_normal_abspath "$2" func_relative_path_tbindir=$func_normal_abspath_result # Ascend the tree starting from libdir while :; do # check if we have found a prefix of bindir case $func_relative_path_tbindir in $func_relative_path_tlibdir) # found an exact match func_relative_path_tcancelled= break ;; $func_relative_path_tlibdir*) # found a matching prefix func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" func_relative_path_tcancelled=$func_stripname_result if test -z "$func_relative_path_result"; then func_relative_path_result=. fi break ;; *) func_dirname $func_relative_path_tlibdir func_relative_path_tlibdir=$func_dirname_result if test -z "$func_relative_path_tlibdir"; then # Have to descend all the way to the root! func_relative_path_result=../$func_relative_path_result func_relative_path_tcancelled=$func_relative_path_tbindir break fi func_relative_path_result=../$func_relative_path_result ;; esac done # Now calculate path; take care to avoid doubling-up slashes. func_stripname '' '/' "$func_relative_path_result" func_relative_path_result=$func_stripname_result func_stripname '/' '/' "$func_relative_path_tcancelled" if test -n "$func_stripname_result"; then func_append func_relative_path_result "/$func_stripname_result" fi # Normalisation. If bindir is libdir, return '.' else relative path. if test -n "$func_relative_path_result"; then func_stripname './' '' "$func_relative_path_result" func_relative_path_result=$func_stripname_result fi test -n "$func_relative_path_result" || func_relative_path_result=. : } # func_quote_for_eval ARG... # -------------------------- # Aesthetically quote ARGs to be evaled later. # This function returns two values: # i) func_quote_for_eval_result # double-quoted, suitable for a subsequent eval # ii) func_quote_for_eval_unquoted_result # has all characters that are still active within double # quotes backslashified. func_quote_for_eval () { $debug_cmd func_quote_for_eval_unquoted_result= func_quote_for_eval_result= while test 0 -lt $#; do case $1 in *[\\\`\"\$]*) _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;; *) _G_unquoted_arg=$1 ;; esac if test -n "$func_quote_for_eval_unquoted_result"; then func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg" else func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg" fi case $_G_unquoted_arg in # Double-quote args containing shell metacharacters to delay # word splitting, command substitution and variable expansion # for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") _G_quoted_arg=\"$_G_unquoted_arg\" ;; *) _G_quoted_arg=$_G_unquoted_arg ;; esac if test -n "$func_quote_for_eval_result"; then func_append func_quote_for_eval_result " $_G_quoted_arg" else func_append func_quote_for_eval_result "$_G_quoted_arg" fi shift done } # func_quote_for_expand ARG # ------------------------- # Aesthetically quote ARG to be evaled later; same as above, # but do not quote variable references. func_quote_for_expand () { $debug_cmd case $1 in *[\\\`\"]*) _G_arg=`$ECHO "$1" | $SED \ -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;; *) _G_arg=$1 ;; esac case $_G_arg in # Double-quote args containing shell metacharacters to delay # word splitting and command substitution for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") _G_arg=\"$_G_arg\" ;; esac func_quote_for_expand_result=$_G_arg } # func_stripname PREFIX SUFFIX NAME # --------------------------------- # strip PREFIX and SUFFIX from NAME, and store in func_stripname_result. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). if test yes = "$_G_HAVE_XSI_OPS"; then eval 'func_stripname () { $debug_cmd # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are # positional parameters, so assign one to ordinary variable first. func_stripname_result=$3 func_stripname_result=${func_stripname_result#"$1"} func_stripname_result=${func_stripname_result%"$2"} }' else func_stripname () { $debug_cmd case $2 in .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;; *) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;; esac } fi # func_show_eval CMD [FAIL_EXP] # ----------------------------- # Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. func_show_eval () { $debug_cmd _G_cmd=$1 _G_fail_exp=${2-':'} func_quote_for_expand "$_G_cmd" eval "func_notquiet $func_quote_for_expand_result" $opt_dry_run || { eval "$_G_cmd" _G_status=$? if test 0 -ne "$_G_status"; then eval "(exit $_G_status); $_G_fail_exp" fi } } # func_show_eval_locale CMD [FAIL_EXP] # ------------------------------------ # Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. Use the saved locale for evaluation. func_show_eval_locale () { $debug_cmd _G_cmd=$1 _G_fail_exp=${2-':'} $opt_quiet || { func_quote_for_expand "$_G_cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || { eval "$_G_user_locale $_G_cmd" _G_status=$? eval "$_G_safe_locale" if test 0 -ne "$_G_status"; then eval "(exit $_G_status); $_G_fail_exp" fi } } # func_tr_sh # ---------- # Turn $1 into a string suitable for a shell variable name. # Result is stored in $func_tr_sh_result. All characters # not in the set a-zA-Z0-9_ are replaced with '_'. Further, # if $1 begins with a digit, a '_' is prepended as well. func_tr_sh () { $debug_cmd case $1 in [0-9]* | *[!a-zA-Z0-9_]*) func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'` ;; * ) func_tr_sh_result=$1 ;; esac } # func_verbose ARG... # ------------------- # Echo program name prefixed message in verbose mode only. func_verbose () { $debug_cmd $opt_verbose && func_echo "$*" : } # func_warn_and_continue ARG... # ----------------------------- # Echo program name prefixed warning message to standard error. func_warn_and_continue () { $debug_cmd $require_term_colors func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2 } # func_warning CATEGORY ARG... # ---------------------------- # Echo program name prefixed warning message to standard error. Warning # messages can be filtered according to CATEGORY, where this function # elides messages where CATEGORY is not listed in the global variable # 'opt_warning_types'. func_warning () { $debug_cmd # CATEGORY must be in the warning_categories list! case " $warning_categories " in *" $1 "*) ;; *) func_internal_error "invalid warning category '$1'" ;; esac _G_category=$1 shift case " $opt_warning_types " in *" $_G_category "*) $warning_func ${1+"$@"} ;; esac } # func_sort_ver VER1 VER2 # ----------------------- # 'sort -V' is not generally available. # Note this deviates from the version comparison in automake # in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a # but this should suffice as we won't be specifying old # version formats or redundant trailing .0 in bootstrap.conf. # If we did want full compatibility then we should probably # use m4_version_compare from autoconf. func_sort_ver () { $debug_cmd printf '%s\n%s\n' "$1" "$2" \ | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n } # func_lt_ver PREV CURR # --------------------- # Return true if PREV and CURR are in the correct order according to # func_sort_ver, otherwise false. Use it like this: # # func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..." func_lt_ver () { $debug_cmd test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q` } # Local variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" # time-stamp-time-zone: "UTC" # End: #! /bin/sh # Set a version string for this script. scriptversion=2015-10-07.11; # UTC # A portable, pluggable option parser for Bourne shell. # Written by Gary V. Vaughan, 2010 # Copyright (C) 2010-2015 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # Please report bugs or propose patches to gary@gnu.org. ## ------ ## ## Usage. ## ## ------ ## # This file is a library for parsing options in your shell scripts along # with assorted other useful supporting features that you can make use # of too. # # For the simplest scripts you might need only: # # #!/bin/sh # . relative/path/to/funclib.sh # . relative/path/to/options-parser # scriptversion=1.0 # func_options ${1+"$@"} # eval set dummy "$func_options_result"; shift # ...rest of your script... # # In order for the '--version' option to work, you will need to have a # suitably formatted comment like the one at the top of this file # starting with '# Written by ' and ending with '# warranty; '. # # For '-h' and '--help' to work, you will also need a one line # description of your script's purpose in a comment directly above the # '# Written by ' line, like the one at the top of this file. # # The default options also support '--debug', which will turn on shell # execution tracing (see the comment above debug_cmd below for another # use), and '--verbose' and the func_verbose function to allow your script # to display verbose messages only when your user has specified # '--verbose'. # # After sourcing this file, you can plug processing for additional # options by amending the variables from the 'Configuration' section # below, and following the instructions in the 'Option parsing' # section further down. ## -------------- ## ## Configuration. ## ## -------------- ## # You should override these variables in your script after sourcing this # file so that they reflect the customisations you have added to the # option parser. # The usage line for option parsing errors and the start of '-h' and # '--help' output messages. You can embed shell variables for delayed # expansion at the time the message is displayed, but you will need to # quote other shell meta-characters carefully to prevent them being # expanded when the contents are evaled. usage='$progpath [OPTION]...' # Short help message in response to '-h' and '--help'. Add to this or # override it after sourcing this library to reflect the full set of # options your script accepts. usage_message="\ --debug enable verbose shell tracing -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all] -v, --verbose verbosely report processing --version print version information and exit -h, --help print short or long help message and exit " # Additional text appended to 'usage_message' in response to '--help'. long_help_message=" Warning categories include: 'all' show all warnings 'none' turn off all the warnings 'error' warnings are treated as fatal errors" # Help message printed before fatal option parsing errors. fatal_help="Try '\$progname --help' for more information." ## ------------------------- ## ## Hook function management. ## ## ------------------------- ## # This section contains functions for adding, removing, and running hooks # to the main code. A hook is just a named list of of function, that can # be run in order later on. # func_hookable FUNC_NAME # ----------------------- # Declare that FUNC_NAME will run hooks added with # 'func_add_hook FUNC_NAME ...'. func_hookable () { $debug_cmd func_append hookable_fns " $1" } # func_add_hook FUNC_NAME HOOK_FUNC # --------------------------------- # Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must # first have been declared "hookable" by a call to 'func_hookable'. func_add_hook () { $debug_cmd case " $hookable_fns " in *" $1 "*) ;; *) func_fatal_error "'$1' does not accept hook functions." ;; esac eval func_append ${1}_hooks '" $2"' } # func_remove_hook FUNC_NAME HOOK_FUNC # ------------------------------------ # Remove HOOK_FUNC from the list of functions called by FUNC_NAME. func_remove_hook () { $debug_cmd eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`' } # func_run_hooks FUNC_NAME [ARG]... # --------------------------------- # Run all hook functions registered to FUNC_NAME. # It is assumed that the list of hook functions contains nothing more # than a whitespace-delimited list of legal shell function names, and # no effort is wasted trying to catch shell meta-characters or preserve # whitespace. func_run_hooks () { $debug_cmd _G_rc_run_hooks=false case " $hookable_fns " in *" $1 "*) ;; *) func_fatal_error "'$1' does not support hook funcions.n" ;; esac eval _G_hook_fns=\$$1_hooks; shift for _G_hook in $_G_hook_fns; do if eval $_G_hook '"$@"'; then # store returned options list back into positional # parameters for next 'cmd' execution. eval _G_hook_result=\$${_G_hook}_result eval set dummy "$_G_hook_result"; shift _G_rc_run_hooks=: fi done $_G_rc_run_hooks && func_run_hooks_result=$_G_hook_result } ## --------------- ## ## Option parsing. ## ## --------------- ## # In order to add your own option parsing hooks, you must accept the # full positional parameter list in your hook function, you may remove/edit # any options that you action, and then pass back the remaining unprocessed # options in '_result', escaped suitably for # 'eval'. In this case you also must return $EXIT_SUCCESS to let the # hook's caller know that it should pay attention to # '_result'. Returning $EXIT_FAILURE signalizes that # arguments are left untouched by the hook and therefore caller will ignore the # result variable. # # Like this: # # my_options_prep () # { # $debug_cmd # # # Extend the existing usage message. # usage_message=$usage_message' # -s, --silent don'\''t print informational messages # ' # # No change in '$@' (ignored completely by this hook). There is # # no need to do the equivalent (but slower) action: # # func_quote_for_eval ${1+"$@"} # # my_options_prep_result=$func_quote_for_eval_result # false # } # func_add_hook func_options_prep my_options_prep # # # my_silent_option () # { # $debug_cmd # # args_changed=false # # # Note that for efficiency, we parse as many options as we can # # recognise in a loop before passing the remainder back to the # # caller on the first unrecognised argument we encounter. # while test $# -gt 0; do # opt=$1; shift # case $opt in # --silent|-s) opt_silent=: # args_changed=: # ;; # # Separate non-argument short options: # -s*) func_split_short_opt "$_G_opt" # set dummy "$func_split_short_opt_name" \ # "-$func_split_short_opt_arg" ${1+"$@"} # shift # args_changed=: # ;; # *) # Make sure the first unrecognised option "$_G_opt" # # is added back to "$@", we could need that later # # if $args_changed is true. # set dummy "$_G_opt" ${1+"$@"}; shift; break ;; # esac # done # # if $args_changed; then # func_quote_for_eval ${1+"$@"} # my_silent_option_result=$func_quote_for_eval_result # fi # # $args_changed # } # func_add_hook func_parse_options my_silent_option # # # my_option_validation () # { # $debug_cmd # # $opt_silent && $opt_verbose && func_fatal_help "\ # '--silent' and '--verbose' options are mutually exclusive." # # false # } # func_add_hook func_validate_options my_option_validation # # You'll also need to manually amend $usage_message to reflect the extra # options you parse. It's preferable to append if you can, so that # multiple option parsing hooks can be added safely. # func_options_finish [ARG]... # ---------------------------- # Finishing the option parse loop (call 'func_options' hooks ATM). func_options_finish () { $debug_cmd _G_func_options_finish_exit=false if func_run_hooks func_options ${1+"$@"}; then func_options_finish_result=$func_run_hooks_result _G_func_options_finish_exit=: fi $_G_func_options_finish_exit } # func_options [ARG]... # --------------------- # All the functions called inside func_options are hookable. See the # individual implementations for details. func_hookable func_options func_options () { $debug_cmd _G_rc_options=false for my_func in options_prep parse_options validate_options options_finish do if eval func_$my_func '${1+"$@"}'; then eval _G_res_var='$'"func_${my_func}_result" eval set dummy "$_G_res_var" ; shift _G_rc_options=: fi done # Save modified positional parameters for caller. As a top-level # options-parser function we always need to set the 'func_options_result' # variable (regardless the $_G_rc_options value). if $_G_rc_options; then func_options_result=$_G_res_var else func_quote_for_eval ${1+"$@"} func_options_result=$func_quote_for_eval_result fi $_G_rc_options } # func_options_prep [ARG]... # -------------------------- # All initialisations required before starting the option parse loop. # Note that when calling hook functions, we pass through the list of # positional parameters. If a hook function modifies that list, and # needs to propagate that back to rest of this script, then the complete # modified list must be put in 'func_run_hooks_result' before # returning $EXIT_SUCCESS (otherwise $EXIT_FAILURE is returned). func_hookable func_options_prep func_options_prep () { $debug_cmd # Option defaults: opt_verbose=false opt_warning_types= _G_rc_options_prep=false if func_run_hooks func_options_prep ${1+"$@"}; then _G_rc_options_prep=: # save modified positional parameters for caller func_options_prep_result=$func_run_hooks_result fi $_G_rc_options_prep } # func_parse_options [ARG]... # --------------------------- # The main option parsing loop. func_hookable func_parse_options func_parse_options () { $debug_cmd func_parse_options_result= _G_rc_parse_options=false # this just eases exit handling while test $# -gt 0; do # Defer to hook functions for initial option parsing, so they # get priority in the event of reusing an option name. if func_run_hooks func_parse_options ${1+"$@"}; then eval set dummy "$func_run_hooks_result"; shift _G_rc_parse_options=: fi # Break out of the loop if we already parsed every option. test $# -gt 0 || break _G_match_parse_options=: _G_opt=$1 shift case $_G_opt in --debug|-x) debug_cmd='set -x' func_echo "enabling shell trace mode" $debug_cmd ;; --no-warnings|--no-warning|--no-warn) set dummy --warnings none ${1+"$@"} shift ;; --warnings|--warning|-W) if test $# = 0 && func_missing_arg $_G_opt; then _G_rc_parse_options=: break fi case " $warning_categories $1" in *" $1 "*) # trailing space prevents matching last $1 above func_append_uniq opt_warning_types " $1" ;; *all) opt_warning_types=$warning_categories ;; *none) opt_warning_types=none warning_func=: ;; *error) opt_warning_types=$warning_categories warning_func=func_fatal_error ;; *) func_fatal_error \ "unsupported warning category: '$1'" ;; esac shift ;; --verbose|-v) opt_verbose=: ;; --version) func_version ;; -\?|-h) func_usage ;; --help) func_help ;; # Separate optargs to long options (plugins may need this): --*=*) func_split_equals "$_G_opt" set dummy "$func_split_equals_lhs" \ "$func_split_equals_rhs" ${1+"$@"} shift ;; # Separate optargs to short options: -W*) func_split_short_opt "$_G_opt" set dummy "$func_split_short_opt_name" \ "$func_split_short_opt_arg" ${1+"$@"} shift ;; # Separate non-argument short options: -\?*|-h*|-v*|-x*) func_split_short_opt "$_G_opt" set dummy "$func_split_short_opt_name" \ "-$func_split_short_opt_arg" ${1+"$@"} shift ;; --) _G_rc_parse_options=: ; break ;; -*) func_fatal_help "unrecognised option: '$_G_opt'" ;; *) set dummy "$_G_opt" ${1+"$@"}; shift _G_match_parse_options=false break ;; esac $_G_match_parse_options && _G_rc_parse_options=: done if $_G_rc_parse_options; then # save modified positional parameters for caller func_quote_for_eval ${1+"$@"} func_parse_options_result=$func_quote_for_eval_result fi $_G_rc_parse_options } # func_validate_options [ARG]... # ------------------------------ # Perform any sanity checks on option settings and/or unconsumed # arguments. func_hookable func_validate_options func_validate_options () { $debug_cmd _G_rc_validate_options=false # Display all warnings if -W was not given. test -n "$opt_warning_types" || opt_warning_types=" $warning_categories" if func_run_hooks func_validate_options ${1+"$@"}; then # save modified positional parameters for caller func_validate_options_result=$func_run_hooks_result _G_rc_validate_options=: fi # Bail if the options were screwed! $exit_cmd $EXIT_FAILURE $_G_rc_validate_options } ## ----------------- ## ## Helper functions. ## ## ----------------- ## # This section contains the helper functions used by the rest of the # hookable option parser framework in ascii-betical order. # func_fatal_help ARG... # ---------------------- # Echo program name prefixed message to standard error, followed by # a help hint, and exit. func_fatal_help () { $debug_cmd eval \$ECHO \""Usage: $usage"\" eval \$ECHO \""$fatal_help"\" func_error ${1+"$@"} exit $EXIT_FAILURE } # func_help # --------- # Echo long help message to standard output and exit. func_help () { $debug_cmd func_usage_message $ECHO "$long_help_message" exit 0 } # func_missing_arg ARGNAME # ------------------------ # Echo program name prefixed message to standard error and set global # exit_cmd. func_missing_arg () { $debug_cmd func_error "Missing argument for '$1'." exit_cmd=exit } # func_split_equals STRING # ------------------------ # Set func_split_equals_lhs and func_split_equals_rhs shell variables after # splitting STRING at the '=' sign. test -z "$_G_HAVE_XSI_OPS" \ && (eval 'x=a/b/c; test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ && _G_HAVE_XSI_OPS=yes if test yes = "$_G_HAVE_XSI_OPS" then # This is an XSI compatible shell, allowing a faster implementation... eval 'func_split_equals () { $debug_cmd func_split_equals_lhs=${1%%=*} func_split_equals_rhs=${1#*=} test "x$func_split_equals_lhs" = "x$1" \ && func_split_equals_rhs= }' else # ...otherwise fall back to using expr, which is often a shell builtin. func_split_equals () { $debug_cmd func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'` func_split_equals_rhs= test "x$func_split_equals_lhs" = "x$1" \ || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'` } fi #func_split_equals # func_split_short_opt SHORTOPT # ----------------------------- # Set func_split_short_opt_name and func_split_short_opt_arg shell # variables after splitting SHORTOPT after the 2nd character. if test yes = "$_G_HAVE_XSI_OPS" then # This is an XSI compatible shell, allowing a faster implementation... eval 'func_split_short_opt () { $debug_cmd func_split_short_opt_arg=${1#??} func_split_short_opt_name=${1%"$func_split_short_opt_arg"} }' else # ...otherwise fall back to using expr, which is often a shell builtin. func_split_short_opt () { $debug_cmd func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'` func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'` } fi #func_split_short_opt # func_usage # ---------- # Echo short help message to standard output and exit. func_usage () { $debug_cmd func_usage_message $ECHO "Run '$progname --help |${PAGER-more}' for full usage" exit 0 } # func_usage_message # ------------------ # Echo short help message to standard output. func_usage_message () { $debug_cmd eval \$ECHO \""Usage: $usage"\" echo $SED -n 's|^# || /^Written by/{ x;p;x } h /^Written by/q' < "$progpath" echo eval \$ECHO \""$usage_message"\" } # func_version # ------------ # Echo version message to standard output and exit. func_version () { $debug_cmd printf '%s\n' "$progname $scriptversion" $SED -n ' /(C)/!b go :more /\./!{ N s|\n# | | b more } :go /^# Written by /,/# warranty; / { s|^# || s|^# *$|| s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2| p } /^# Written by / { s|^# || p } /^warranty; /q' < "$progpath" exit $? } # Local variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" # time-stamp-time-zone: "UTC" # End: # Set a version string. scriptversion='(GNU libtool) 2.4.6' # func_echo ARG... # ---------------- # Libtool also displays the current mode in messages, so override # funclib.sh func_echo with this custom definition. func_echo () { $debug_cmd _G_message=$* func_echo_IFS=$IFS IFS=$nl for _G_line in $_G_message; do IFS=$func_echo_IFS $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line" done IFS=$func_echo_IFS } # func_warning ARG... # ------------------- # Libtool warnings are not categorized, so override funclib.sh # func_warning with this simpler definition. func_warning () { $debug_cmd $warning_func ${1+"$@"} } ## ---------------- ## ## Options parsing. ## ## ---------------- ## # Hook in the functions to make sure our own options are parsed during # the option parsing loop. usage='$progpath [OPTION]... [MODE-ARG]...' # Short help message in response to '-h'. usage_message="Options: --config show all configuration variables --debug enable verbose shell tracing -n, --dry-run display commands without modifying any files --features display basic configuration information and exit --mode=MODE use operation mode MODE --no-warnings equivalent to '-Wnone' --preserve-dup-deps don't remove duplicate dependency libraries --quiet, --silent don't print informational messages --tag=TAG use configuration variables from tag TAG -v, --verbose print more informational messages than default --version print version information -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all] -h, --help, --help-all print short, long, or detailed help message " # Additional text appended to 'usage_message' in response to '--help'. func_help () { $debug_cmd func_usage_message $ECHO "$long_help_message MODE must be one of the following: clean remove files from the build directory compile compile a source file into a libtool object execute automatically set library path, then run a program finish complete the installation of libtool libraries install install libraries or executables link create a library or an executable uninstall remove libraries from an installed directory MODE-ARGS vary depending on the MODE. When passed as first option, '--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that. Try '$progname --help --mode=MODE' for a more detailed description of MODE. When reporting a bug, please describe a test case to reproduce it and include the following information: host-triplet: $host shell: $SHELL compiler: $LTCC compiler flags: $LTCFLAGS linker: $LD (gnu? $with_gnu_ld) version: $progname $scriptversion Debian-2.4.6-14 automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q` autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q` Report bugs to . GNU libtool home page: . General help using GNU software: ." exit 0 } # func_lo2o OBJECT-NAME # --------------------- # Transform OBJECT-NAME from a '.lo' suffix to the platform specific # object suffix. lo2o=s/\\.lo\$/.$objext/ o2lo=s/\\.$objext\$/.lo/ if test yes = "$_G_HAVE_XSI_OPS"; then eval 'func_lo2o () { case $1 in *.lo) func_lo2o_result=${1%.lo}.$objext ;; * ) func_lo2o_result=$1 ;; esac }' # func_xform LIBOBJ-OR-SOURCE # --------------------------- # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise) # suffix to a '.lo' libtool-object suffix. eval 'func_xform () { func_xform_result=${1%.*}.lo }' else # ...otherwise fall back to using sed. func_lo2o () { func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"` } func_xform () { func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'` } fi # func_fatal_configuration ARG... # ------------------------------- # Echo program name prefixed message to standard error, followed by # a configuration failure hint, and exit. func_fatal_configuration () { func__fatal_error ${1+"$@"} \ "See the $PACKAGE documentation for more information." \ "Fatal configuration error." } # func_config # ----------- # Display the configuration for all the tags in this script. func_config () { re_begincf='^# ### BEGIN LIBTOOL' re_endcf='^# ### END LIBTOOL' # Default configuration. $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" # Now print the configurations for the tags. for tagname in $taglist; do $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" done exit $? } # func_features # ------------- # Display the features supported by this script. func_features () { echo "host: $host" if test yes = "$build_libtool_libs"; then echo "enable shared libraries" else echo "disable shared libraries" fi if test yes = "$build_old_libs"; then echo "enable static libraries" else echo "disable static libraries" fi exit $? } # func_enable_tag TAGNAME # ----------------------- # Verify that TAGNAME is valid, and either flag an error and exit, or # enable the TAGNAME tag. We also add TAGNAME to the global $taglist # variable here. func_enable_tag () { # Global variable: tagname=$1 re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" sed_extractcf=/$re_begincf/,/$re_endcf/p # Validate tagname. case $tagname in *[!-_A-Za-z0-9,/]*) func_fatal_error "invalid tag name: $tagname" ;; esac # Don't test for the "default" C tag, as we know it's # there but not specially marked. case $tagname in CC) ;; *) if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then taglist="$taglist $tagname" # Evaluate the configuration. Be careful to quote the path # and the sed script, to avoid splitting on whitespace, but # also don't use non-portable quotes within backquotes within # quotes we have to do it in 2 steps: extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` eval "$extractedcf" else func_error "ignoring unknown tag $tagname" fi ;; esac } # func_check_version_match # ------------------------ # Ensure that we are using m4 macros, and libtool script from the same # release of libtool. func_check_version_match () { if test "$package_revision" != "$macro_revision"; then if test "$VERSION" != "$macro_version"; then if test -z "$macro_version"; then cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from an older release. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from $PACKAGE $macro_version. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF fi else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, $progname: but the definition of this LT_INIT comes from revision $macro_revision. $progname: You should recreate aclocal.m4 with macros from revision $package_revision $progname: of $PACKAGE $VERSION and run autoconf again. _LT_EOF fi exit $EXIT_MISMATCH fi } # libtool_options_prep [ARG]... # ----------------------------- # Preparation for options parsed by libtool. libtool_options_prep () { $debug_mode # Option defaults: opt_config=false opt_dlopen= opt_dry_run=false opt_help=false opt_mode= opt_preserve_dup_deps=false opt_quiet=false nonopt= preserve_args= _G_rc_lt_options_prep=: # Shorthand for --mode=foo, only valid as the first argument case $1 in clean|clea|cle|cl) shift; set dummy --mode clean ${1+"$@"}; shift ;; compile|compil|compi|comp|com|co|c) shift; set dummy --mode compile ${1+"$@"}; shift ;; execute|execut|execu|exec|exe|ex|e) shift; set dummy --mode execute ${1+"$@"}; shift ;; finish|finis|fini|fin|fi|f) shift; set dummy --mode finish ${1+"$@"}; shift ;; install|instal|insta|inst|ins|in|i) shift; set dummy --mode install ${1+"$@"}; shift ;; link|lin|li|l) shift; set dummy --mode link ${1+"$@"}; shift ;; uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) shift; set dummy --mode uninstall ${1+"$@"}; shift ;; *) _G_rc_lt_options_prep=false ;; esac if $_G_rc_lt_options_prep; then # Pass back the list of options. func_quote_for_eval ${1+"$@"} libtool_options_prep_result=$func_quote_for_eval_result fi $_G_rc_lt_options_prep } func_add_hook func_options_prep libtool_options_prep # libtool_parse_options [ARG]... # --------------------------------- # Provide handling for libtool specific options. libtool_parse_options () { $debug_cmd _G_rc_lt_parse_options=false # Perform our own loop to consume as many options as possible in # each iteration. while test $# -gt 0; do _G_match_lt_parse_options=: _G_opt=$1 shift case $_G_opt in --dry-run|--dryrun|-n) opt_dry_run=: ;; --config) func_config ;; --dlopen|-dlopen) opt_dlopen="${opt_dlopen+$opt_dlopen }$1" shift ;; --preserve-dup-deps) opt_preserve_dup_deps=: ;; --features) func_features ;; --finish) set dummy --mode finish ${1+"$@"}; shift ;; --help) opt_help=: ;; --help-all) opt_help=': help-all' ;; --mode) test $# = 0 && func_missing_arg $_G_opt && break opt_mode=$1 case $1 in # Valid mode arguments: clean|compile|execute|finish|install|link|relink|uninstall) ;; # Catch anything else as an error *) func_error "invalid argument for $_G_opt" exit_cmd=exit break ;; esac shift ;; --no-silent|--no-quiet) opt_quiet=false func_append preserve_args " $_G_opt" ;; --no-warnings|--no-warning|--no-warn) opt_warning=false func_append preserve_args " $_G_opt" ;; --no-verbose) opt_verbose=false func_append preserve_args " $_G_opt" ;; --silent|--quiet) opt_quiet=: opt_verbose=false func_append preserve_args " $_G_opt" ;; --tag) test $# = 0 && func_missing_arg $_G_opt && break opt_tag=$1 func_append preserve_args " $_G_opt $1" func_enable_tag "$1" shift ;; --verbose|-v) opt_quiet=false opt_verbose=: func_append preserve_args " $_G_opt" ;; # An option not handled by this hook function: *) set dummy "$_G_opt" ${1+"$@"} ; shift _G_match_lt_parse_options=false break ;; esac $_G_match_lt_parse_options && _G_rc_lt_parse_options=: done if $_G_rc_lt_parse_options; then # save modified positional parameters for caller func_quote_for_eval ${1+"$@"} libtool_parse_options_result=$func_quote_for_eval_result fi $_G_rc_lt_parse_options } func_add_hook func_parse_options libtool_parse_options # libtool_validate_options [ARG]... # --------------------------------- # Perform any sanity checks on option settings and/or unconsumed # arguments. libtool_validate_options () { # save first non-option argument if test 0 -lt $#; then nonopt=$1 shift fi # preserve --debug test : = "$debug_cmd" || func_append preserve_args " --debug" case $host in # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452 # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788 *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*) # don't eliminate duplications in $postdeps and $predeps opt_duplicate_compiler_generated_deps=: ;; *) opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps ;; esac $opt_help || { # Sanity checks first: func_check_version_match test yes != "$build_libtool_libs" \ && test yes != "$build_old_libs" \ && func_fatal_configuration "not configured to build any kind of library" # Darwin sucks eval std_shrext=\"$shrext_cmds\" # Only execute mode is allowed to have -dlopen flags. if test -n "$opt_dlopen" && test execute != "$opt_mode"; then func_error "unrecognized option '-dlopen'" $ECHO "$help" 1>&2 exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. generic_help=$help help="Try '$progname --help --mode=$opt_mode' for more information." } # Pass back the unparsed argument list func_quote_for_eval ${1+"$@"} libtool_validate_options_result=$func_quote_for_eval_result } func_add_hook func_validate_options libtool_validate_options # Process options as early as possible so that --help and --version # can return quickly. func_options ${1+"$@"} eval set dummy "$func_options_result"; shift ## ----------- ## ## Main. ## ## ----------- ## magic='%%%MAGIC variable%%%' magic_exe='%%%MAGIC EXE variable%%%' # Global variables. extracted_archives= extracted_serial=0 # If this variable is set in any of the actions, the command in it # will be execed at the end. This prevents here-documents from being # left over by shells. exec_cmd= # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $1 _LTECHO_EOF' } # func_generated_by_libtool # True iff stdin has been generated by Libtool. This function is only # a basic sanity check; it will hardly flush out determined imposters. func_generated_by_libtool_p () { $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 } # func_lalib_p file # True iff FILE is a libtool '.la' library or '.lo' object file. # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_lalib_p () { test -f "$1" && $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p } # func_lalib_unsafe_p file # True iff FILE is a libtool '.la' library or '.lo' object file. # This function implements the same check as func_lalib_p without # resorting to external programs. To this end, it redirects stdin and # closes it afterwards, without saving the original file descriptor. # As a safety measure, use it only where a negative result would be # fatal anyway. Works if 'file' does not exist. func_lalib_unsafe_p () { lalib_p=no if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then for lalib_p_l in 1 2 3 4 do read lalib_p_line case $lalib_p_line in \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; esac done exec 0<&5 5<&- fi test yes = "$lalib_p" } # func_ltwrapper_script_p file # True iff FILE is a libtool wrapper script # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_script_p () { test -f "$1" && $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p } # func_ltwrapper_executable_p file # True iff FILE is a libtool wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_executable_p () { func_ltwrapper_exec_suffix= case $1 in *.exe) ;; *) func_ltwrapper_exec_suffix=.exe ;; esac $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 } # func_ltwrapper_scriptname file # Assumes file is an ltwrapper_executable # uses $file to determine the appropriate filename for a # temporary ltwrapper_script. func_ltwrapper_scriptname () { func_dirname_and_basename "$1" "" "." func_stripname '' '.exe' "$func_basename_result" func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper } # func_ltwrapper_p file # True iff FILE is a libtool wrapper script or wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_p () { func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" } # func_execute_cmds commands fail_cmd # Execute tilde-delimited COMMANDS. # If FAIL_CMD is given, eval that upon failure. # FAIL_CMD may read-access the current command in variable CMD! func_execute_cmds () { $debug_cmd save_ifs=$IFS; IFS='~' for cmd in $1; do IFS=$sp$nl eval cmd=\"$cmd\" IFS=$save_ifs func_show_eval "$cmd" "${2-:}" done IFS=$save_ifs } # func_source file # Source FILE, adding directory component if necessary. # Note that it is not necessary on cygwin/mingw to append a dot to # FILE even if both FILE and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing # 'FILE.' does not work on cygwin managed mounts. func_source () { $debug_cmd case $1 in */* | *\\*) . "$1" ;; *) . "./$1" ;; esac } # func_resolve_sysroot PATH # Replace a leading = in PATH with a sysroot. Store the result into # func_resolve_sysroot_result func_resolve_sysroot () { func_resolve_sysroot_result=$1 case $func_resolve_sysroot_result in =*) func_stripname '=' '' "$func_resolve_sysroot_result" func_resolve_sysroot_result=$lt_sysroot$func_stripname_result ;; esac } # func_replace_sysroot PATH # If PATH begins with the sysroot, replace it with = and # store the result into func_replace_sysroot_result. func_replace_sysroot () { case $lt_sysroot:$1 in ?*:"$lt_sysroot"*) func_stripname "$lt_sysroot" '' "$1" func_replace_sysroot_result='='$func_stripname_result ;; *) # Including no sysroot. func_replace_sysroot_result=$1 ;; esac } # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. # Only attempt this if the compiler in the base compile # command doesn't match the default compiler. # arg is usually of the form 'gcc ...' func_infer_tag () { $debug_cmd if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do func_append_quoted CC_quoted "$arg" done CC_expanded=`func_echo_all $CC` CC_quoted_expanded=`func_echo_all $CC_quoted` case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) for z in $available_tags; do if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. func_append_quoted CC_quoted "$arg" done CC_expanded=`func_echo_all $CC` CC_quoted_expanded=`func_echo_all $CC_quoted` case "$@ " in " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. tagname=$z break ;; esac fi done # If $tagname still isn't set, then no tagged configuration # was found and let the user know that the "--tag" command # line option must be used. if test -z "$tagname"; then func_echo "unable to infer tagged configuration" func_fatal_error "specify a tag with '--tag'" # else # func_verbose "using $tagname tagged configuration" fi ;; esac fi } # func_write_libtool_object output_name pic_name nonpic_name # Create a libtool object file (analogous to a ".la" file), # but don't create it if we're doing a dry run. func_write_libtool_object () { write_libobj=$1 if test yes = "$build_libtool_libs"; then write_lobj=\'$2\' else write_lobj=none fi if test yes = "$build_old_libs"; then write_oldobj=\'$3\' else write_oldobj=none fi $opt_dry_run || { cat >${write_libobj}T </dev/null` if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | $SED -e "$sed_naive_backslashify"` else func_convert_core_file_wine_to_w32_result= fi fi } # end: func_convert_core_file_wine_to_w32 # func_convert_core_path_wine_to_w32 ARG # Helper function used by path conversion functions when $build is *nix, and # $host is mingw, cygwin, or some other w32 environment. Relies on a correctly # configured wine environment available, with the winepath program in $build's # $PATH. Assumes ARG has no leading or trailing path separator characters. # # ARG is path to be converted from $build format to win32. # Result is available in $func_convert_core_path_wine_to_w32_result. # Unconvertible file (directory) names in ARG are skipped; if no directory names # are convertible, then the result may be empty. func_convert_core_path_wine_to_w32 () { $debug_cmd # unfortunately, winepath doesn't convert paths, only file names func_convert_core_path_wine_to_w32_result= if test -n "$1"; then oldIFS=$IFS IFS=: for func_convert_core_path_wine_to_w32_f in $1; do IFS=$oldIFS func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" if test -n "$func_convert_core_file_wine_to_w32_result"; then if test -z "$func_convert_core_path_wine_to_w32_result"; then func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result else func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" fi fi done IFS=$oldIFS fi } # end: func_convert_core_path_wine_to_w32 # func_cygpath ARGS... # Wrapper around calling the cygpath program via LT_CYGPATH. This is used when # when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) # $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or # (2), returns the Cygwin file name or path in func_cygpath_result (input # file name or path is assumed to be in w32 format, as previously converted # from $build's *nix or MSYS format). In case (3), returns the w32 file name # or path in func_cygpath_result (input file name or path is assumed to be in # Cygwin format). Returns an empty string on error. # # ARGS are passed to cygpath, with the last one being the file name or path to # be converted. # # Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH # environment variable; do not put it in $PATH. func_cygpath () { $debug_cmd if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` if test "$?" -ne 0; then # on failure, ensure result is empty func_cygpath_result= fi else func_cygpath_result= func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'" fi } #end: func_cygpath # func_convert_core_msys_to_w32 ARG # Convert file name or path ARG from MSYS format to w32 format. Return # result in func_convert_core_msys_to_w32_result. func_convert_core_msys_to_w32 () { $debug_cmd # awkward: cmd appends spaces to result func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"` } #end: func_convert_core_msys_to_w32 # func_convert_file_check ARG1 ARG2 # Verify that ARG1 (a file name in $build format) was converted to $host # format in ARG2. Otherwise, emit an error message, but continue (resetting # func_to_host_file_result to ARG1). func_convert_file_check () { $debug_cmd if test -z "$2" && test -n "$1"; then func_error "Could not determine host file name corresponding to" func_error " '$1'" func_error "Continuing, but uninstalled executables may not work." # Fallback: func_to_host_file_result=$1 fi } # end func_convert_file_check # func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH # Verify that FROM_PATH (a path in $build format) was converted to $host # format in TO_PATH. Otherwise, emit an error message, but continue, resetting # func_to_host_file_result to a simplistic fallback value (see below). func_convert_path_check () { $debug_cmd if test -z "$4" && test -n "$3"; then func_error "Could not determine the host path corresponding to" func_error " '$3'" func_error "Continuing, but uninstalled executables may not work." # Fallback. This is a deliberately simplistic "conversion" and # should not be "improved". See libtool.info. if test "x$1" != "x$2"; then lt_replace_pathsep_chars="s|$1|$2|g" func_to_host_path_result=`echo "$3" | $SED -e "$lt_replace_pathsep_chars"` else func_to_host_path_result=$3 fi fi } # end func_convert_path_check # func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG # Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT # and appending REPL if ORIG matches BACKPAT. func_convert_path_front_back_pathsep () { $debug_cmd case $4 in $1 ) func_to_host_path_result=$3$func_to_host_path_result ;; esac case $4 in $2 ) func_append func_to_host_path_result "$3" ;; esac } # end func_convert_path_front_back_pathsep ################################################## # $build to $host FILE NAME CONVERSION FUNCTIONS # ################################################## # invoked via '$to_host_file_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # Result will be available in $func_to_host_file_result. # func_to_host_file ARG # Converts the file name ARG from $build format to $host format. Return result # in func_to_host_file_result. func_to_host_file () { $debug_cmd $to_host_file_cmd "$1" } # end func_to_host_file # func_to_tool_file ARG LAZY # converts the file name ARG from $build format to toolchain format. Return # result in func_to_tool_file_result. If the conversion in use is listed # in (the comma separated) LAZY, no conversion takes place. func_to_tool_file () { $debug_cmd case ,$2, in *,"$to_tool_file_cmd",*) func_to_tool_file_result=$1 ;; *) $to_tool_file_cmd "$1" func_to_tool_file_result=$func_to_host_file_result ;; esac } # end func_to_tool_file # func_convert_file_noop ARG # Copy ARG to func_to_host_file_result. func_convert_file_noop () { func_to_host_file_result=$1 } # end func_convert_file_noop # func_convert_file_msys_to_w32 ARG # Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic # conversion to w32 is not available inside the cwrapper. Returns result in # func_to_host_file_result. func_convert_file_msys_to_w32 () { $debug_cmd func_to_host_file_result=$1 if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_to_host_file_result=$func_convert_core_msys_to_w32_result fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_msys_to_w32 # func_convert_file_cygwin_to_w32 ARG # Convert file name ARG from Cygwin to w32 format. Returns result in # func_to_host_file_result. func_convert_file_cygwin_to_w32 () { $debug_cmd func_to_host_file_result=$1 if test -n "$1"; then # because $build is cygwin, we call "the" cygpath in $PATH; no need to use # LT_CYGPATH in this case. func_to_host_file_result=`cygpath -m "$1"` fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_cygwin_to_w32 # func_convert_file_nix_to_w32 ARG # Convert file name ARG from *nix to w32 format. Requires a wine environment # and a working winepath. Returns result in func_to_host_file_result. func_convert_file_nix_to_w32 () { $debug_cmd func_to_host_file_result=$1 if test -n "$1"; then func_convert_core_file_wine_to_w32 "$1" func_to_host_file_result=$func_convert_core_file_wine_to_w32_result fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_nix_to_w32 # func_convert_file_msys_to_cygwin ARG # Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. # Returns result in func_to_host_file_result. func_convert_file_msys_to_cygwin () { $debug_cmd func_to_host_file_result=$1 if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_cygpath -u "$func_convert_core_msys_to_w32_result" func_to_host_file_result=$func_cygpath_result fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_msys_to_cygwin # func_convert_file_nix_to_cygwin ARG # Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed # in a wine environment, working winepath, and LT_CYGPATH set. Returns result # in func_to_host_file_result. func_convert_file_nix_to_cygwin () { $debug_cmd func_to_host_file_result=$1 if test -n "$1"; then # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. func_convert_core_file_wine_to_w32 "$1" func_cygpath -u "$func_convert_core_file_wine_to_w32_result" func_to_host_file_result=$func_cygpath_result fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_nix_to_cygwin ############################################# # $build to $host PATH CONVERSION FUNCTIONS # ############################################# # invoked via '$to_host_path_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # The result will be available in $func_to_host_path_result. # # Path separators are also converted from $build format to $host format. If # ARG begins or ends with a path separator character, it is preserved (but # converted to $host format) on output. # # All path conversion functions are named using the following convention: # file name conversion function : func_convert_file_X_to_Y () # path conversion function : func_convert_path_X_to_Y () # where, for any given $build/$host combination the 'X_to_Y' value is the # same. If conversion functions are added for new $build/$host combinations, # the two new functions must follow this pattern, or func_init_to_host_path_cmd # will break. # func_init_to_host_path_cmd # Ensures that function "pointer" variable $to_host_path_cmd is set to the # appropriate value, based on the value of $to_host_file_cmd. to_host_path_cmd= func_init_to_host_path_cmd () { $debug_cmd if test -z "$to_host_path_cmd"; then func_stripname 'func_convert_file_' '' "$to_host_file_cmd" to_host_path_cmd=func_convert_path_$func_stripname_result fi } # func_to_host_path ARG # Converts the path ARG from $build format to $host format. Return result # in func_to_host_path_result. func_to_host_path () { $debug_cmd func_init_to_host_path_cmd $to_host_path_cmd "$1" } # end func_to_host_path # func_convert_path_noop ARG # Copy ARG to func_to_host_path_result. func_convert_path_noop () { func_to_host_path_result=$1 } # end func_convert_path_noop # func_convert_path_msys_to_w32 ARG # Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic # conversion to w32 is not available inside the cwrapper. Returns result in # func_to_host_path_result. func_convert_path_msys_to_w32 () { $debug_cmd func_to_host_path_result=$1 if test -n "$1"; then # Remove leading and trailing path separator characters from ARG. MSYS # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; # and winepath ignores them completely. func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_to_host_path_result=$func_convert_core_msys_to_w32_result func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_msys_to_w32 # func_convert_path_cygwin_to_w32 ARG # Convert path ARG from Cygwin to w32 format. Returns result in # func_to_host_file_result. func_convert_path_cygwin_to_w32 () { $debug_cmd func_to_host_path_result=$1 if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_cygwin_to_w32 # func_convert_path_nix_to_w32 ARG # Convert path ARG from *nix to w32 format. Requires a wine environment and # a working winepath. Returns result in func_to_host_file_result. func_convert_path_nix_to_w32 () { $debug_cmd func_to_host_path_result=$1 if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_to_host_path_result=$func_convert_core_path_wine_to_w32_result func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_nix_to_w32 # func_convert_path_msys_to_cygwin ARG # Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. # Returns result in func_to_host_file_result. func_convert_path_msys_to_cygwin () { $debug_cmd func_to_host_path_result=$1 if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_msys_to_w32_result" func_to_host_path_result=$func_cygpath_result func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi } # end func_convert_path_msys_to_cygwin # func_convert_path_nix_to_cygwin ARG # Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a # a wine environment, working winepath, and LT_CYGPATH set. Returns result in # func_to_host_file_result. func_convert_path_nix_to_cygwin () { $debug_cmd func_to_host_path_result=$1 if test -n "$1"; then # Remove leading and trailing path separator characters from # ARG. msys behavior is inconsistent here, cygpath turns them # into '.;' and ';.', and winepath ignores them completely. func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" func_to_host_path_result=$func_cygpath_result func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi } # end func_convert_path_nix_to_cygwin # func_dll_def_p FILE # True iff FILE is a Windows DLL '.def' file. # Keep in sync with _LT_DLL_DEF_P in libtool.m4 func_dll_def_p () { $debug_cmd func_dll_def_p_tmp=`$SED -n \ -e 's/^[ ]*//' \ -e '/^\(;.*\)*$/d' \ -e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \ -e q \ "$1"` test DEF = "$func_dll_def_p_tmp" } # func_mode_compile arg... func_mode_compile () { $debug_cmd # Get the compilation command and the source file. base_compile= srcfile=$nonopt # always keep a non-empty value in "srcfile" suppress_opt=yes suppress_output= arg_mode=normal libobj= later= pie_flag= for arg do case $arg_mode in arg ) # do not "continue". Instead, add this to base_compile lastarg=$arg arg_mode=normal ;; target ) libobj=$arg arg_mode=normal continue ;; normal ) # Accept any command-line options. case $arg in -o) test -n "$libobj" && \ func_fatal_error "you cannot specify '-o' more than once" arg_mode=target continue ;; -pie | -fpie | -fPIE) func_append pie_flag " $arg" continue ;; -shared | -static | -prefer-pic | -prefer-non-pic) func_append later " $arg" continue ;; -no-suppress) suppress_opt=no continue ;; -Xcompiler) arg_mode=arg # the next one goes into the "base_compile" arg list continue # The current "srcfile" will either be retained or ;; # replaced later. I would guess that would be a bug. -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result lastarg= save_ifs=$IFS; IFS=, for arg in $args; do IFS=$save_ifs func_append_quoted lastarg "$arg" done IFS=$save_ifs func_stripname ' ' '' "$lastarg" lastarg=$func_stripname_result # Add the arguments to base_compile. func_append base_compile " $lastarg" continue ;; *) # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # lastarg=$srcfile srcfile=$arg ;; esac # case $arg ;; esac # case $arg_mode # Aesthetically quote the previous argument. func_append_quoted base_compile "$lastarg" done # for arg case $arg_mode in arg) func_fatal_error "you must specify an argument for -Xcompile" ;; target) func_fatal_error "you must specify a target with '-o'" ;; *) # Get the name of the library object. test -z "$libobj" && { func_basename "$srcfile" libobj=$func_basename_result } ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo case $libobj in *.[cCFSifmso] | \ *.ada | *.adb | *.ads | *.asm | \ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) func_xform "$libobj" libobj=$func_xform_result ;; esac case $libobj in *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; *) func_fatal_error "cannot determine name of library object from '$libobj'" ;; esac func_infer_tag $base_compile for arg in $later; do case $arg in -shared) test yes = "$build_libtool_libs" \ || func_fatal_configuration "cannot build a shared library" build_old_libs=no continue ;; -static) build_libtool_libs=no build_old_libs=yes continue ;; -prefer-pic) pic_mode=yes continue ;; -prefer-non-pic) pic_mode=no continue ;; esac done func_quote_for_eval "$libobj" test "X$libobj" != "X$func_quote_for_eval_result" \ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ && func_warning "libobj name '$libobj' may not contain shell special characters." func_dirname_and_basename "$obj" "/" "" objname=$func_basename_result xdir=$func_dirname_result lobj=$xdir$objdir/$objname test -z "$base_compile" && \ func_fatal_help "you must specify a compilation command" # Delete any leftover library objects. if test yes = "$build_old_libs"; then removelist="$obj $lobj $libobj ${libobj}T" else removelist="$lobj $libobj ${libobj}T" fi # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in cygwin* | mingw* | pw32* | os2* | cegcc*) pic_mode=default ;; esac if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c if test no = "$compiler_c_o"; then output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext lockfile=$output_obj.lock else output_obj= need_locks=no lockfile= fi # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test yes = "$need_locks"; then until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done elif test warn = "$need_locks"; then if test -f "$lockfile"; then $ECHO "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support '-c' and '-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi func_append removelist " $output_obj" $ECHO "$srcfile" > "$lockfile" fi $opt_dry_run || $RM $removelist func_append removelist " $lockfile" trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 srcfile=$func_to_tool_file_result func_quote_for_eval "$srcfile" qsrcfile=$func_quote_for_eval_result # Only build a PIC object if we are building libtool libraries. if test yes = "$build_libtool_libs"; then # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile if test no != "$pic_mode"; then command="$base_compile $qsrcfile $pic_flag" else # Don't build PIC code command="$base_compile $qsrcfile" fi func_mkdir_p "$xdir$objdir" if test -z "$output_obj"; then # Place PIC objects in $objdir func_append command " -o $lobj" fi func_show_eval_locale "$command" \ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' if test warn = "$need_locks" && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support '-c' and '-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then func_show_eval '$MV "$output_obj" "$lobj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi # Allow error messages only from the first compilation. if test yes = "$suppress_opt"; then suppress_output=' >/dev/null 2>&1' fi fi # Only build a position-dependent object if we build old libraries. if test yes = "$build_old_libs"; then if test yes != "$pic_mode"; then # Don't build PIC code command="$base_compile $qsrcfile$pie_flag" else command="$base_compile $qsrcfile $pic_flag" fi if test yes = "$compiler_c_o"; then func_append command " -o $obj" fi # Suppress compiler output if we already did a PIC compilation. func_append command "$suppress_output" func_show_eval_locale "$command" \ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' if test warn = "$need_locks" && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support '-c' and '-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then func_show_eval '$MV "$output_obj" "$obj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi fi $opt_dry_run || { func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" # Unlock the critical section if it was locked if test no != "$need_locks"; then removelist=$lockfile $RM "$lockfile" fi } exit $EXIT_SUCCESS } $opt_help || { test compile = "$opt_mode" && func_mode_compile ${1+"$@"} } func_mode_help () { # We need to display help for each of the modes. case $opt_mode in "") # Generic help is extracted from the usage comments # at the start of this file. func_help ;; clean) $ECHO \ "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE (typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; compile) $ECHO \ "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -no-suppress do not suppress compiler output for multiple passes -prefer-pic try to build PIC objects only -prefer-non-pic try to build non-PIC objects only -shared do not build a '.o' file suitable for static linking -static only build a '.o' file suitable for static linking -Wc,FLAG pass FLAG directly to the compiler COMPILE-COMMAND is a command to be used in creating a 'standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from SOURCEFILE, then substituting the C source code suffix '.c' with the library object suffix, '.lo'." ;; execute) $ECHO \ "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... Automatically set library path, then run a program. This mode accepts the following additional options: -dlopen FILE add the directory containing FILE to the library path This mode sets the library path environment variable according to '-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated into their corresponding uninstalled binary, and any of their required library directories are added to the library path. Then, COMMAND is executed, with ARGS as arguments." ;; finish) $ECHO \ "Usage: $progname [OPTION]... --mode=finish [LIBDIR]... Complete the installation of libtool libraries. Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use the '--dry-run' option if you just want to see what would be executed." ;; install) $ECHO \ "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be either the 'install' or 'cp' program. The following components of INSTALL-COMMAND are treated specially: -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." ;; link) $ECHO \ "Usage: $progname [OPTION]... --mode=link LINK-COMMAND... Link object files or libraries together to form another library, or to create an executable program. LINK-COMMAND is a command using the C compiler that you would use to create a program from several object files. The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible -bindir BINDIR specify path to binaries directory (for systems where libraries must be found in the PATH setting at runtime) -dlopen FILE '-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened -no-fast-install disable the fast-install mode -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -objectlist FILE use a list of object files found in FILE to specify objects -os2dllname NAME force a short DLL name on OS/2 (no effect on other OSes) -precious-files-regex REGEX don't remove output files matching REGEX -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -shared only do dynamic linking of libtool libraries -shrext SUFFIX override the standard shared library file extension -static do not do any dynamic linking of uninstalled libtool libraries -static-libtool-libs do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] -weak LIBNAME declare that the target provides the LIBNAME interface -Wc,FLAG -Xcompiler FLAG pass linker-specific FLAG directly to the compiler -Wl,FLAG -Xlinker FLAG pass linker-specific FLAG directly to the linker -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) All other options (arguments beginning with '-') are ignored. Every other argument is treated as a filename. Files ending in '.la' are treated as uninstalled libtool libraries, other files are standard or library object files. If the OUTPUT-FILE ends in '.la', then a libtool library is created, only library objects ('.lo' files) may be specified, and '-rpath' is required, except when creating a convenience library. If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created using 'ar' and 'ranlib', or on Windows using 'lib'. If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file is created, otherwise an executable program is created." ;; uninstall) $ECHO \ "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE (typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; *) func_fatal_help "invalid operation mode '$opt_mode'" ;; esac echo $ECHO "Try '$progname --help' for more information about other modes." } # Now that we've collected a possible --mode arg, show help if necessary if $opt_help; then if test : = "$opt_help"; then func_mode_help else { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do func_mode_help done } | $SED -n '1p; 2,$s/^Usage:/ or: /p' { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do echo func_mode_help done } | $SED '1d /^When reporting/,/^Report/{ H d } $x /information about other modes/d /more detailed .*MODE/d s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' fi exit $? fi # func_mode_execute arg... func_mode_execute () { $debug_cmd # The first argument is the command name. cmd=$nonopt test -z "$cmd" && \ func_fatal_help "you must specify a COMMAND" # Handle -dlopen flags immediately. for file in $opt_dlopen; do test -f "$file" \ || func_fatal_help "'$file' is not a file" dir= case $file in *.la) func_resolve_sysroot "$file" file=$func_resolve_sysroot_result # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "'$lib' is not a valid libtool archive" # Read the libtool library. dlname= library_names= func_source "$file" # Skip this library if it cannot be dlopened. if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && \ func_warning "'$file' was not linked with '-export-dynamic'" continue fi func_dirname "$file" "" "." dir=$func_dirname_result if test -f "$dir/$objdir/$dlname"; then func_append dir "/$objdir" else if test ! -f "$dir/$dlname"; then func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'" fi fi ;; *.lo) # Just add the directory containing the .lo file. func_dirname "$file" "" "." dir=$func_dirname_result ;; *) func_warning "'-dlopen' is ignored for non-libtool libraries and objects" continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` test -n "$absdir" && dir=$absdir # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then eval "$shlibpath_var=\"\$dir\"" else eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi done # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. libtool_execute_magic=$magic # Check if any of the arguments is a wrapper script. args= for file do case $file in -* | *.la | *.lo ) ;; *) # Do a test to see if this is really a libtool program. if func_ltwrapper_script_p "$file"; then func_source "$file" # Transform arg to wrapped name. file=$progdir/$program elif func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" func_source "$func_ltwrapper_scriptname_result" # Transform arg to wrapped name. file=$progdir/$program fi ;; esac # Quote arguments (to preserve shell metacharacters). func_append_quoted args "$file" done if $opt_dry_run; then # Display what would be done. if test -n "$shlibpath_var"; then eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" echo "export $shlibpath_var" fi $ECHO "$cmd$args" exit $EXIT_SUCCESS else if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" fi # Restore saved environment variables for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${save_$lt_var+set}\" = set; then $lt_var=\$save_$lt_var; export $lt_var else $lt_unset $lt_var fi" done # Now prepare to actually exec the command. exec_cmd=\$cmd$args fi } test execute = "$opt_mode" && func_mode_execute ${1+"$@"} # func_mode_finish arg... func_mode_finish () { $debug_cmd libs= libdirs= admincmds= for opt in "$nonopt" ${1+"$@"} do if test -d "$opt"; then func_append libdirs " $opt" elif test -f "$opt"; then if func_lalib_unsafe_p "$opt"; then func_append libs " $opt" else func_warning "'$opt' is not a valid libtool archive" fi else func_fatal_error "invalid argument '$opt'" fi done if test -n "$libs"; then if test -n "$lt_sysroot"; then sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" else sysroot_cmd= fi # Remove sysroot references if $opt_dry_run; then for lib in $libs; do echo "removing references to $lt_sysroot and '=' prefixes from $lib" done else tmpdir=`func_mktempdir` for lib in $libs; do $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ > $tmpdir/tmp-la mv -f $tmpdir/tmp-la $lib done ${RM}r "$tmpdir" fi fi if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. func_execute_cmds "$finish_cmds" 'admincmds="$admincmds '"$cmd"'"' fi if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" $opt_dry_run || eval "$cmds" || func_append admincmds " $cmds" fi done fi # Exit here if they wanted silent mode. $opt_quiet && exit $EXIT_SUCCESS if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then echo "----------------------------------------------------------------------" echo "Libraries have been installed in:" for libdir in $libdirs; do $ECHO " $libdir" done echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" echo "specify the full pathname of the library, or use the '-LLIBDIR'" echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then echo " - add LIBDIR to the '$shlibpath_var' environment variable" echo " during execution" fi if test -n "$runpath_var"; then echo " - add LIBDIR to the '$runpath_var' environment variable" echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" $ECHO " - use the '$flag' linker flag" fi if test -n "$admincmds"; then $ECHO " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then echo " - have your system administrator add LIBDIR to '/etc/ld.so.conf'" fi echo echo "See any operating system documentation about shared libraries for" case $host in solaris2.[6789]|solaris2.1[0-9]) echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" echo "pages." ;; *) echo "more information, such as the ld(1) and ld.so(8) manual pages." ;; esac echo "----------------------------------------------------------------------" fi exit $EXIT_SUCCESS } test finish = "$opt_mode" && func_mode_finish ${1+"$@"} # func_mode_install arg... func_mode_install () { $debug_cmd # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" || # Allow the use of GNU shtool's install command. case $nonopt in *shtool*) :;; *) false;; esac then # Aesthetically quote it. func_quote_for_eval "$nonopt" install_prog="$func_quote_for_eval_result " arg=$1 shift else install_prog= arg=$nonopt fi # The real first argument should be the name of the installation program. # Aesthetically quote it. func_quote_for_eval "$arg" func_append install_prog "$func_quote_for_eval_result" install_shared_prog=$install_prog case " $install_prog " in *[\\\ /]cp\ *) install_cp=: ;; *) install_cp=false ;; esac # We need to accept at least all the BSD install flags. dest= files= opts= prev= install_type= isdir=false stripme= no_mode=: for arg do arg2= if test -n "$dest"; then func_append files " $dest" dest=$arg continue fi case $arg in -d) isdir=: ;; -f) if $install_cp; then :; else prev=$arg fi ;; -g | -m | -o) prev=$arg ;; -s) stripme=" -s" continue ;; -*) ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then if test X-m = "X$prev" && test -n "$install_override_mode"; then arg2=$install_override_mode no_mode=false fi prev= else dest=$arg continue fi ;; esac # Aesthetically quote the argument. func_quote_for_eval "$arg" func_append install_prog " $func_quote_for_eval_result" if test -n "$arg2"; then func_quote_for_eval "$arg2" fi func_append install_shared_prog " $func_quote_for_eval_result" done test -z "$install_prog" && \ func_fatal_help "you must specify an install program" test -n "$prev" && \ func_fatal_help "the '$prev' option requires an argument" if test -n "$install_override_mode" && $no_mode; then if $install_cp; then :; else func_quote_for_eval "$install_override_mode" func_append install_shared_prog " -m $func_quote_for_eval_result" fi fi if test -z "$files"; then if test -z "$dest"; then func_fatal_help "no file or destination specified" else func_fatal_help "you must specify a destination" fi fi # Strip any trailing slash from the destination. func_stripname '' '/' "$dest" dest=$func_stripname_result # Check to see that the destination is a directory. test -d "$dest" && isdir=: if $isdir; then destdir=$dest destname= else func_dirname_and_basename "$dest" "" "." destdir=$func_dirname_result destname=$func_basename_result # Not a directory, so check to see that there is only one file specified. set dummy $files; shift test "$#" -gt 1 && \ func_fatal_help "'$dest' is not a directory" fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do case $file in *.lo) ;; *) func_fatal_help "'$destdir' must be an absolute directory name" ;; esac done ;; esac # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic=$magic staticlibs= future_libdirs= current_libdirs= for file in $files; do # Do each installation. case $file in *.$libext) # Do the static libraries later. func_append staticlibs " $file" ;; *.la) func_resolve_sysroot "$file" file=$func_resolve_sysroot_result # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "'$file' is not a valid libtool archive" library_names= old_library= relink_command= func_source "$file" # Add the libdir to current_libdirs if it is the destination. if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; *) func_append current_libdirs " $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; *) func_append future_libdirs " $libdir" ;; esac fi func_dirname "$file" "/" "" dir=$func_dirname_result func_append dir "$objdir" if test -n "$relink_command"; then # Determine the prefix the user has applied to our future dir. inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that # are installed to the same prefix. # At present, this check doesn't affect windows .dll's that # are installed into $libdir/../bin (currently, that works fine) # but it's something to keep an eye on. test "$inst_prefix_dir" = "$destdir" && \ func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir" if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` else relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` fi func_warning "relinking '$file'" func_show_eval "$relink_command" \ 'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"' fi # See the names of the shared library. set dummy $library_names; shift if test -n "$1"; then realname=$1 shift srcname=$realname test -n "$relink_command" && srcname=${realname}T # Install the shared library and build the symlinks. func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ 'exit $?' tstripme=$stripme case $host_os in cygwin* | mingw* | pw32* | cegcc*) case $realname in *.dll.a) tstripme= ;; esac ;; os2*) case $realname in *_dll.a) tstripme= ;; esac ;; esac if test -n "$tstripme" && test -n "$striplib"; then func_show_eval "$striplib $destdir/$realname" 'exit $?' fi if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. # Try 'ln -sf' first, because the 'ln' binary might depend on # the symlink we replace! Solaris /bin/ln does not understand -f, # so we also need to try rm && ln -s. for linkname do test "$linkname" != "$realname" \ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" done fi # Do each command in the postinstall commands. lib=$destdir/$realname func_execute_cmds "$postinstall_cmds" 'exit $?' fi # Install the pseudo-library for information purposes. func_basename "$file" name=$func_basename_result instname=$dir/${name}i func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' # Maybe install the static library, too. test -n "$old_library" && func_append staticlibs " $dir/$old_library" ;; *.lo) # Install (i.e. copy) a libtool object. # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile=$destdir/$destname else func_basename "$file" destfile=$func_basename_result destfile=$destdir/$destfile fi # Deduce the name of the destination old-style object file. case $destfile in *.lo) func_lo2o "$destfile" staticdest=$func_lo2o_result ;; *.$objext) staticdest=$destfile destfile= ;; *) func_fatal_help "cannot copy a libtool object to '$destfile'" ;; esac # Install the libtool object if requested. test -n "$destfile" && \ func_show_eval "$install_prog $file $destfile" 'exit $?' # Install the old object if enabled. if test yes = "$build_old_libs"; then # Deduce the name of the old-style object file. func_lo2o "$file" staticobj=$func_lo2o_result func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' fi exit $EXIT_SUCCESS ;; *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile=$destdir/$destname else func_basename "$file" destfile=$func_basename_result destfile=$destdir/$destfile fi # If the file is missing, and there is a .exe on the end, strip it # because it is most likely a libtool script we actually want to # install stripped_ext= case $file in *.exe) if test ! -f "$file"; then func_stripname '' '.exe' "$file" file=$func_stripname_result stripped_ext=.exe fi ;; esac # Do a test to see if this is really a libtool program. case $host in *cygwin* | *mingw*) if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" wrapper=$func_ltwrapper_scriptname_result else func_stripname '' '.exe' "$file" wrapper=$func_stripname_result fi ;; *) wrapper=$file ;; esac if func_ltwrapper_script_p "$wrapper"; then notinst_deplibs= relink_command= func_source "$wrapper" # Check the variables that should have been set. test -z "$generated_by_libtool_version" && \ func_fatal_error "invalid libtool wrapper script '$wrapper'" finalize=: for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then func_source "$lib" fi libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'` if test -n "$libdir" && test ! -f "$libfile"; then func_warning "'$lib' has not been installed in '$libdir'" finalize=false fi done relink_command= func_source "$wrapper" outputname= if test no = "$fast_install" && test -n "$relink_command"; then $opt_dry_run || { if $finalize; then tmpdir=`func_mktempdir` func_basename "$file$stripped_ext" file=$func_basename_result outputname=$tmpdir/$file # Replace the output file specification. relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` $opt_quiet || { func_quote_for_expand "$relink_command" eval "func_echo $func_quote_for_expand_result" } if eval "$relink_command"; then : else func_error "error: relink '$file' with the above command before installing it" $opt_dry_run || ${RM}r "$tmpdir" continue fi file=$outputname else func_warning "cannot relink '$file'" fi } else # Install the binary that we compiled earlier. file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another # one anyway case $install_prog,$host in */usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok ;; *.exe:*) destfile=$destfile.exe ;; *:*.exe) func_stripname '' '.exe' "$destfile" destfile=$func_stripname_result ;; esac ;; esac func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' $opt_dry_run || if test -n "$outputname"; then ${RM}r "$tmpdir" fi ;; esac done for file in $staticlibs; do func_basename "$file" name=$func_basename_result # Set up the ranlib parameters. oldlib=$destdir/$name func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 tool_oldlib=$func_to_tool_file_result func_show_eval "$install_prog \$file \$oldlib" 'exit $?' if test -n "$stripme" && test -n "$old_striplib"; then func_show_eval "$old_striplib $tool_oldlib" 'exit $?' fi # Do each command in the postinstall commands. func_execute_cmds "$old_postinstall_cmds" 'exit $?' done test -n "$future_libdirs" && \ func_warning "remember to run '$progname --finish$future_libdirs'" if test -n "$current_libdirs"; then # Maybe just do a dry run. $opt_dry_run && current_libdirs=" -n$current_libdirs" exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs' else exit $EXIT_SUCCESS fi } test install = "$opt_mode" && func_mode_install ${1+"$@"} # func_generate_dlsyms outputname originator pic_p # Extract symbols from dlprefiles and create ${outputname}S.o with # a dlpreopen symbol table. func_generate_dlsyms () { $debug_cmd my_outputname=$1 my_originator=$2 my_pic_p=${3-false} my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'` my_dlsyms= if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then if test -n "$NM" && test -n "$global_symbol_pipe"; then my_dlsyms=${my_outputname}S.c else func_error "not configured to extract global symbols from dlpreopened files" fi fi if test -n "$my_dlsyms"; then case $my_dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. nlist=$output_objdir/$my_outputname.nm func_show_eval "$RM $nlist ${nlist}S ${nlist}T" # Parse the name list into a source file. func_verbose "creating $output_objdir/$my_dlsyms" $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ /* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */ /* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */ #ifdef __cplusplus extern \"C\" { #endif #if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) #pragma GCC diagnostic ignored \"-Wstrict-prototypes\" #endif /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE /* DATA imports from DLLs on WIN32 can't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST #elif defined __osf__ /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif #define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) /* External symbol declarations for the compiler. */\ " if test yes = "$dlself"; then func_verbose "generating symbol list for '$output'" $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` for progfile in $progfiles; do func_to_tool_file "$progfile" func_convert_file_msys_to_w32 func_verbose "extracting global C symbols from '$func_to_tool_file_result'" $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then $opt_dry_run || { eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi if test -n "$export_symbols_regex"; then $opt_dry_run || { eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi # Prepare the list of exported symbols if test -z "$export_symbols"; then export_symbols=$output_objdir/$outputname.exp $opt_dry_run || { $RM $export_symbols eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ;; esac } else $opt_dry_run || { eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; esac } fi fi for dlprefile in $dlprefiles; do func_verbose "extracting global C symbols from '$dlprefile'" func_basename "$dlprefile" name=$func_basename_result case $host in *cygwin* | *mingw* | *cegcc* ) # if an import library, we need to obtain dlname if func_win32_import_lib_p "$dlprefile"; then func_tr_sh "$dlprefile" eval "curr_lafile=\$libfile_$func_tr_sh_result" dlprefile_dlbasename= if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then # Use subshell, to avoid clobbering current variable values dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` if test -n "$dlprefile_dlname"; then func_basename "$dlprefile_dlname" dlprefile_dlbasename=$func_basename_result else # no lafile. user explicitly requested -dlpreopen . $sharedlib_from_linklib_cmd "$dlprefile" dlprefile_dlbasename=$sharedlib_from_linklib_result fi fi $opt_dry_run || { if test -n "$dlprefile_dlbasename"; then eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' else func_warning "Could not compute DLL name from $name" eval '$ECHO ": $name " >> "$nlist"' fi func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" } else # not an import lib $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" } fi ;; *) $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" } ;; esac done $opt_dry_run || { # Make sure we have at least an empty file. test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $MV "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. if $GREP -v "^: " < "$nlist" | if sort -k 3 /dev/null 2>&1; then sort -k 3 else sort +2 fi | uniq > "$nlist"S; then : else $GREP -v "^: " < "$nlist" > "$nlist"S fi if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' else echo '/* NONE */' >> "$output_objdir/$my_dlsyms" fi func_show_eval '$RM "${nlist}I"' if test -n "$global_symbol_to_import"; then eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I' fi echo >> "$output_objdir/$my_dlsyms" "\ /* The mapping between symbol names and symbols. */ typedef struct { const char *name; void *address; } lt_dlsymlist; extern LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[];\ " if test -s "$nlist"I; then echo >> "$output_objdir/$my_dlsyms" "\ static void lt_syminit(void) { LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols; for (; symbol->name; ++symbol) {" $SED 's/.*/ if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms" echo >> "$output_objdir/$my_dlsyms" "\ } }" fi echo >> "$output_objdir/$my_dlsyms" "\ LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[] = { {\"$my_originator\", (void *) 0}," if test -s "$nlist"I; then echo >> "$output_objdir/$my_dlsyms" "\ {\"@INIT@\", (void *) <_syminit}," fi case $need_lib_prefix in no) eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; *) eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; esac echo >> "$output_objdir/$my_dlsyms" "\ {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt_${my_prefix}_LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif\ " } # !$opt_dry_run pic_flag_for_symtable= case "$compile_command " in *" -static "*) ;; *) case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; *-*-hpux*) pic_flag_for_symtable=" $pic_flag" ;; *) $my_pic_p && pic_flag_for_symtable=" $pic_flag" ;; esac ;; esac symtab_cflags= for arg in $LTCFLAGS; do case $arg in -pie | -fpie | -fPIE) ;; *) func_append symtab_cflags " $arg" ;; esac done # Now compile the dynamic symbol file. func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' # Clean up the generated files. func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"' # Transform the symbol file into the correct name. symfileobj=$output_objdir/${my_outputname}S.$objext case $host in *cygwin* | *mingw* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` else compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` fi ;; *) compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` ;; esac ;; *) func_fatal_error "unknown suffix for '$my_dlsyms'" ;; esac else # We keep going just in case the user didn't refer to # lt_preloaded_symbols. The linker will fail if global_symbol_pipe # really was required. # Nullify the symbol file. compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` fi } # func_cygming_gnu_implib_p ARG # This predicate returns with zero status (TRUE) if # ARG is a GNU/binutils-style import library. Returns # with nonzero status (FALSE) otherwise. func_cygming_gnu_implib_p () { $debug_cmd func_to_tool_file "$1" func_convert_file_msys_to_w32 func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` test -n "$func_cygming_gnu_implib_tmp" } # func_cygming_ms_implib_p ARG # This predicate returns with zero status (TRUE) if # ARG is an MS-style import library. Returns # with nonzero status (FALSE) otherwise. func_cygming_ms_implib_p () { $debug_cmd func_to_tool_file "$1" func_convert_file_msys_to_w32 func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` test -n "$func_cygming_ms_implib_tmp" } # func_win32_libid arg # return the library type of file 'arg' # # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. # Despite the name, also deal with 64 bit binaries. func_win32_libid () { $debug_cmd win32_libid_type=unknown win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in *ar\ archive\ import\ library*) # definitely import win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then case $nm_interface in "MS dumpbin") if func_cygming_ms_implib_p "$1" || func_cygming_gnu_implib_p "$1" then win32_nmres=import else win32_nmres= fi ;; *) func_to_tool_file "$1" func_convert_file_msys_to_w32 win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | $SED -n -e ' 1,100{ / I /{ s|.*|import| p q } }'` ;; esac case $win32_nmres in import*) win32_libid_type="x86 archive import";; *) win32_libid_type="x86 archive static";; esac fi ;; *DLL*) win32_libid_type="x86 DLL" ;; *executable*) # but shell scripts are "executable" too... case $win32_fileres in *MS\ Windows\ PE\ Intel*) win32_libid_type="x86 DLL" ;; esac ;; esac $ECHO "$win32_libid_type" } # func_cygming_dll_for_implib ARG # # Platform-specific function to extract the # name of the DLL associated with the specified # import library ARG. # Invoked by eval'ing the libtool variable # $sharedlib_from_linklib_cmd # Result is available in the variable # $sharedlib_from_linklib_result func_cygming_dll_for_implib () { $debug_cmd sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` } # func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs # # The is the core of a fallback implementation of a # platform-specific function to extract the name of the # DLL associated with the specified import library LIBNAME. # # SECTION_NAME is either .idata$6 or .idata$7, depending # on the platform and compiler that created the implib. # # Echos the name of the DLL associated with the # specified import library. func_cygming_dll_for_implib_fallback_core () { $debug_cmd match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` $OBJDUMP -s --section "$1" "$2" 2>/dev/null | $SED '/^Contents of section '"$match_literal"':/{ # Place marker at beginning of archive member dllname section s/.*/====MARK====/ p d } # These lines can sometimes be longer than 43 characters, but # are always uninteresting /:[ ]*file format pe[i]\{,1\}-/d /^In archive [^:]*:/d # Ensure marker is printed /^====MARK====/p # Remove all lines with less than 43 characters /^.\{43\}/!d # From remaining lines, remove first 43 characters s/^.\{43\}//' | $SED -n ' # Join marker and all lines until next marker into a single line /^====MARK====/ b para H $ b para b :para x s/\n//g # Remove the marker s/^====MARK====// # Remove trailing dots and whitespace s/[\. \t]*$// # Print /./p' | # we now have a list, one entry per line, of the stringified # contents of the appropriate section of all members of the # archive that possess that section. Heuristic: eliminate # all those that have a first or second character that is # a '.' (that is, objdump's representation of an unprintable # character.) This should work for all archives with less than # 0x302f exports -- but will fail for DLLs whose name actually # begins with a literal '.' or a single character followed by # a '.'. # # Of those that remain, print the first one. $SED -e '/^\./d;/^.\./d;q' } # func_cygming_dll_for_implib_fallback ARG # Platform-specific function to extract the # name of the DLL associated with the specified # import library ARG. # # This fallback implementation is for use when $DLLTOOL # does not support the --identify-strict option. # Invoked by eval'ing the libtool variable # $sharedlib_from_linklib_cmd # Result is available in the variable # $sharedlib_from_linklib_result func_cygming_dll_for_implib_fallback () { $debug_cmd if func_cygming_gnu_implib_p "$1"; then # binutils import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` elif func_cygming_ms_implib_p "$1"; then # ms-generated import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` else # unknown sharedlib_from_linklib_result= fi } # func_extract_an_archive dir oldlib func_extract_an_archive () { $debug_cmd f_ex_an_ar_dir=$1; shift f_ex_an_ar_oldlib=$1 if test yes = "$lock_old_archive_extraction"; then lockfile=$f_ex_an_ar_oldlib.lock until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done fi func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ 'stat=$?; rm -f "$lockfile"; exit $stat' if test yes = "$lock_old_archive_extraction"; then $opt_dry_run || rm -f "$lockfile" fi if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" fi } # func_extract_archives gentop oldlib ... func_extract_archives () { $debug_cmd my_gentop=$1; shift my_oldlibs=${1+"$@"} my_oldobjs= my_xlib= my_xabs= my_xdir= for my_xlib in $my_oldlibs; do # Extract the objects. case $my_xlib in [\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;; *) my_xabs=`pwd`"/$my_xlib" ;; esac func_basename "$my_xlib" my_xlib=$func_basename_result my_xlib_u=$my_xlib while :; do case " $extracted_archives " in *" $my_xlib_u "*) func_arith $extracted_serial + 1 extracted_serial=$func_arith_result my_xlib_u=lt$extracted_serial-$my_xlib ;; *) break ;; esac done extracted_archives="$extracted_archives $my_xlib_u" my_xdir=$my_gentop/$my_xlib_u func_mkdir_p "$my_xdir" case $host in *-darwin*) func_verbose "Extracting $my_xabs" # Do not bother doing anything if just a dry run $opt_dry_run || { darwin_orig_dir=`pwd` cd $my_xdir || exit $? darwin_archive=$my_xabs darwin_curdir=`pwd` func_basename "$darwin_archive" darwin_base_archive=$func_basename_result darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` if test -n "$darwin_arches"; then darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` darwin_arch= func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" for darwin_arch in $darwin_arches; do func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch" $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive" cd "unfat-$$/$darwin_base_archive-$darwin_arch" func_extract_an_archive "`pwd`" "$darwin_base_archive" cd "$darwin_curdir" $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" done # $darwin_arches ## Okay now we've a bunch of thin objects, gotta fatten them up :) darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u` darwin_file= darwin_files= for darwin_file in $darwin_filelist; do darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` $LIPO -create -output "$darwin_file" $darwin_files done # $darwin_filelist $RM -rf unfat-$$ cd "$darwin_orig_dir" else cd $darwin_orig_dir func_extract_an_archive "$my_xdir" "$my_xabs" fi # $darwin_arches } # !$opt_dry_run ;; *) func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` done func_extract_archives_result=$my_oldobjs } # func_emit_wrapper [arg=no] # # Emit a libtool wrapper script on stdout. # Don't directly open a file because we may want to # incorporate the script contents within a cygwin/mingw # wrapper executable. Must ONLY be called from within # func_mode_link because it depends on a number of variables # set therein. # # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR # variable will take. If 'yes', then the emitted script # will assume that the directory where it is stored is # the $objdir directory. This is a cygwin/mingw-specific # behavior. func_emit_wrapper () { func_emit_wrapper_arg1=${1-no} $ECHO "\ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname # Generated by $PROGRAM (GNU $PACKAGE) $VERSION # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. # # This wrapper script should never be moved out of the build directory. # If it is, it will not operate correctly. # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. sed_quote_subst='$sed_quote_subst' # Be Bourne compatible if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variables: generated_by_libtool_version='$macro_version' notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$ECHO are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then file=\"\$0\"" qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` $ECHO "\ # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$1 _LTECHO_EOF' } ECHO=\"$qECHO\" fi # Very basic option parsing. These options are (a) specific to # the libtool wrapper, (b) are identical between the wrapper # /script/ and the wrapper /executable/ that is used only on # windows platforms, and (c) all begin with the string "--lt-" # (application programs are unlikely to have options that match # this pattern). # # There are only two supported options: --lt-debug and # --lt-dump-script. There is, deliberately, no --lt-help. # # The first argument to this parsing function should be the # script's $0 value, followed by "$@". lt_option_debug= func_parse_lt_options () { lt_script_arg0=\$0 shift for lt_opt do case \"\$lt_opt\" in --lt-debug) lt_option_debug=1 ;; --lt-dump-script) lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` cat \"\$lt_dump_D/\$lt_dump_F\" exit 0 ;; --lt-*) \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 exit 1 ;; esac done # Print the debug banner immediately: if test -n \"\$lt_option_debug\"; then echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2 fi } # Used when --lt-debug. Prints its arguments to stdout # (redirection is the responsibility of the caller) func_lt_dump_args () { lt_dump_args_N=1; for lt_arg do \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\" lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` done } # Core function for launching the target application func_exec_program_core () { " case $host in # Backslashes separate directories on plain windows *-*-mingw | *-*-os2* | *-cegcc*) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} " ;; *) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir/\$program\" \${1+\"\$@\"} " ;; esac $ECHO "\ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 exit 1 } # A function to encapsulate launching the target application # Strips options in the --lt-* namespace from \$@ and # launches target application with the remaining arguments. func_exec_program () { case \" \$* \" in *\\ --lt-*) for lt_wr_arg do case \$lt_wr_arg in --lt-*) ;; *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; esac shift done ;; esac func_exec_program_core \${1+\"\$@\"} } # Parse options func_parse_lt_options \"\$0\" \${1+\"\$@\"} # Find the directory that this script lives in. thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` done # Usually 'no', except on cygwin/mingw when embedded into # the cwrapper. WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then # special case for '.' if test \"\$thisdir\" = \".\"; then thisdir=\`pwd\` fi # remove .libs from thisdir case \"\$thisdir\" in *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; $objdir ) thisdir=. ;; esac fi # Try to get the absolute directory name. absdir=\`cd \"\$thisdir\" && pwd\` test -n \"\$absdir\" && thisdir=\"\$absdir\" " if test yes = "$fast_install"; then $ECHO "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" if test ! -d \"\$progdir\"; then $MKDIR \"\$progdir\" else $RM \"\$progdir/\$file\" fi" $ECHO "\ # relink executable if necessary if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else \$ECHO \"\$relink_command_output\" >&2 $RM \"\$progdir/\$file\" exit 1 fi fi $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || { $RM \"\$progdir/\$program\"; $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } $RM \"\$progdir/\$file\" fi" else $ECHO "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi $ECHO "\ if test -f \"\$progdir/\$program\"; then" # fixup the dll searchpath if we need to. # # Fix the DLL searchpath if we need to. Do this before prepending # to shlibpath, because on Windows, both are PATH and uninstalled # libraries must come first. if test -n "$dllsearchpath"; then $ECHO "\ # Add the dll search path components to the executable PATH PATH=$dllsearchpath:\$PATH " fi # Export our shlibpath_var if we have one. if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $ECHO "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` export $shlibpath_var " fi $ECHO "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. func_exec_program \${1+\"\$@\"} fi else # The program doesn't exist. \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi fi\ " } # func_emit_cwrapperexe_src # emit the source code for a wrapper executable on stdout # Must ONLY be called from within func_mode_link because # it depends on a number of variable set therein. func_emit_cwrapperexe_src () { cat < #include #ifdef _MSC_VER # include # include # include #else # include # include # ifdef __CYGWIN__ # include # endif #endif #include #include #include #include #include #include #include #include #define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) /* declarations of non-ANSI functions */ #if defined __MINGW32__ # ifdef __STRICT_ANSI__ int _putenv (const char *); # endif #elif defined __CYGWIN__ # ifdef __STRICT_ANSI__ char *realpath (const char *, char *); int putenv (char *); int setenv (const char *, const char *, int); # endif /* #elif defined other_platform || defined ... */ #endif /* portability defines, excluding path handling macros */ #if defined _MSC_VER # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv # define S_IXUSR _S_IEXEC #elif defined __MINGW32__ # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv #elif defined __CYGWIN__ # define HAVE_SETENV # define FOPEN_WB "wb" /* #elif defined other platforms ... */ #endif #if defined PATH_MAX # define LT_PATHMAX PATH_MAX #elif defined MAXPATHLEN # define LT_PATHMAX MAXPATHLEN #else # define LT_PATHMAX 1024 #endif #ifndef S_IXOTH # define S_IXOTH 0 #endif #ifndef S_IXGRP # define S_IXGRP 0 #endif /* path handling portability macros */ #ifndef DIR_SEPARATOR # define DIR_SEPARATOR '/' # define PATH_SEPARATOR ':' #endif #if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \ defined __OS2__ # define HAVE_DOS_BASED_FILE_SYSTEM # define FOPEN_WB "wb" # ifndef DIR_SEPARATOR_2 # define DIR_SEPARATOR_2 '\\' # endif # ifndef PATH_SEPARATOR_2 # define PATH_SEPARATOR_2 ';' # endif #endif #ifndef DIR_SEPARATOR_2 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) #else /* DIR_SEPARATOR_2 */ # define IS_DIR_SEPARATOR(ch) \ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) #endif /* DIR_SEPARATOR_2 */ #ifndef PATH_SEPARATOR_2 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) #else /* PATH_SEPARATOR_2 */ # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) #endif /* PATH_SEPARATOR_2 */ #ifndef FOPEN_WB # define FOPEN_WB "w" #endif #ifndef _O_BINARY # define _O_BINARY 0 #endif #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) #define XFREE(stale) do { \ if (stale) { free (stale); stale = 0; } \ } while (0) #if defined LT_DEBUGWRAPPER static int lt_debug = 1; #else static int lt_debug = 0; #endif const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ void *xmalloc (size_t num); char *xstrdup (const char *string); const char *base_name (const char *name); char *find_executable (const char *wrapper); char *chase_symlinks (const char *pathspec); int make_executable (const char *path); int check_executable (const char *path); char *strendzap (char *str, const char *pat); void lt_debugprintf (const char *file, int line, const char *fmt, ...); void lt_fatal (const char *file, int line, const char *message, ...); static const char *nonnull (const char *s); static const char *nonempty (const char *s); void lt_setenv (const char *name, const char *value); char *lt_extend_str (const char *orig_value, const char *add, int to_end); void lt_update_exe_path (const char *name, const char *value); void lt_update_lib_path (const char *name, const char *value); char **prepare_spawn (char **argv); void lt_dump_script (FILE *f); EOF cat <= 0) && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) return 1; else return 0; } int make_executable (const char *path) { int rval = 0; struct stat st; lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", nonempty (path)); if ((!path) || (!*path)) return 0; if (stat (path, &st) >= 0) { rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); } return rval; } /* Searches for the full path of the wrapper. Returns newly allocated full path name if found, NULL otherwise Does not chase symlinks, even on platforms that support them. */ char * find_executable (const char *wrapper) { int has_slash = 0; const char *p; const char *p_next; /* static buffer for getcwd */ char tmp[LT_PATHMAX + 1]; size_t tmp_len; char *concat_name; lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", nonempty (wrapper)); if ((wrapper == NULL) || (*wrapper == '\0')) return NULL; /* Absolute path? */ #if defined HAVE_DOS_BASED_FILE_SYSTEM if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } else { #endif if (IS_DIR_SEPARATOR (wrapper[0])) { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } #if defined HAVE_DOS_BASED_FILE_SYSTEM } #endif for (p = wrapper; *p; p++) if (*p == '/') { has_slash = 1; break; } if (!has_slash) { /* no slashes; search PATH */ const char *path = getenv ("PATH"); if (path != NULL) { for (p = path; *p; p = p_next) { const char *q; size_t p_len; for (q = p; *q; q++) if (IS_PATH_SEPARATOR (*q)) break; p_len = (size_t) (q - p); p_next = (*q == '\0' ? q : q + 1); if (p_len == 0) { /* empty path: current directory */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); } else { concat_name = XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, p, p_len); concat_name[p_len] = '/'; strcpy (concat_name + p_len + 1, wrapper); } if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } } /* not found in PATH; assume curdir */ } /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); return NULL; } char * chase_symlinks (const char *pathspec) { #ifndef S_ISLNK return xstrdup (pathspec); #else char buf[LT_PATHMAX]; struct stat s; char *tmp_pathspec = xstrdup (pathspec); char *p; int has_symlinks = 0; while (strlen (tmp_pathspec) && !has_symlinks) { lt_debugprintf (__FILE__, __LINE__, "checking path component for symlinks: %s\n", tmp_pathspec); if (lstat (tmp_pathspec, &s) == 0) { if (S_ISLNK (s.st_mode) != 0) { has_symlinks = 1; break; } /* search backwards for last DIR_SEPARATOR */ p = tmp_pathspec + strlen (tmp_pathspec) - 1; while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) p--; if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) { /* no more DIR_SEPARATORS left */ break; } *p = '\0'; } else { lt_fatal (__FILE__, __LINE__, "error accessing file \"%s\": %s", tmp_pathspec, nonnull (strerror (errno))); } } XFREE (tmp_pathspec); if (!has_symlinks) { return xstrdup (pathspec); } tmp_pathspec = realpath (pathspec, buf); if (tmp_pathspec == 0) { lt_fatal (__FILE__, __LINE__, "could not follow symlinks for %s", pathspec); } return xstrdup (tmp_pathspec); #endif } char * strendzap (char *str, const char *pat) { size_t len, patlen; assert (str != NULL); assert (pat != NULL); len = strlen (str); patlen = strlen (pat); if (patlen <= len) { str += len - patlen; if (STREQ (str, pat)) *str = '\0'; } return str; } void lt_debugprintf (const char *file, int line, const char *fmt, ...) { va_list args; if (lt_debug) { (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); va_start (args, fmt); (void) vfprintf (stderr, fmt, args); va_end (args); } } static void lt_error_core (int exit_status, const char *file, int line, const char *mode, const char *message, va_list ap) { fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); vfprintf (stderr, message, ap); fprintf (stderr, ".\n"); if (exit_status >= 0) exit (exit_status); } void lt_fatal (const char *file, int line, const char *message, ...) { va_list ap; va_start (ap, message); lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); va_end (ap); } static const char * nonnull (const char *s) { return s ? s : "(null)"; } static const char * nonempty (const char *s) { return (s && !*s) ? "(empty)" : nonnull (s); } void lt_setenv (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_setenv) setting '%s' to '%s'\n", nonnull (name), nonnull (value)); { #ifdef HAVE_SETENV /* always make a copy, for consistency with !HAVE_SETENV */ char *str = xstrdup (value); setenv (name, str, 1); #else size_t len = strlen (name) + 1 + strlen (value) + 1; char *str = XMALLOC (char, len); sprintf (str, "%s=%s", name, value); if (putenv (str) != EXIT_SUCCESS) { XFREE (str); } #endif } } char * lt_extend_str (const char *orig_value, const char *add, int to_end) { char *new_value; if (orig_value && *orig_value) { size_t orig_value_len = strlen (orig_value); size_t add_len = strlen (add); new_value = XMALLOC (char, add_len + orig_value_len + 1); if (to_end) { strcpy (new_value, orig_value); strcpy (new_value + orig_value_len, add); } else { strcpy (new_value, add); strcpy (new_value + add_len, orig_value); } } else { new_value = xstrdup (add); } return new_value; } void lt_update_exe_path (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", nonnull (name), nonnull (value)); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); /* some systems can't cope with a ':'-terminated path #' */ size_t len = strlen (new_value); while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1])) { new_value[--len] = '\0'; } lt_setenv (name, new_value); XFREE (new_value); } } void lt_update_lib_path (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", nonnull (name), nonnull (value)); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); lt_setenv (name, new_value); XFREE (new_value); } } EOF case $host_os in mingw*) cat <<"EOF" /* Prepares an argument vector before calling spawn(). Note that spawn() does not by itself call the command interpreter (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); GetVersionEx(&v); v.dwPlatformId == VER_PLATFORM_WIN32_NT; }) ? "cmd.exe" : "command.com"). Instead it simply concatenates the arguments, separated by ' ', and calls CreateProcess(). We must quote the arguments since Win32 CreateProcess() interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a special way: - Space and tab are interpreted as delimiters. They are not treated as delimiters if they are surrounded by double quotes: "...". - Unescaped double quotes are removed from the input. Their only effect is that within double quotes, space and tab are treated like normal characters. - Backslashes not followed by double quotes are not special. - But 2*n+1 backslashes followed by a double quote become n backslashes followed by a double quote (n >= 0): \" -> " \\\" -> \" \\\\\" -> \\" */ #define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" #define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" char ** prepare_spawn (char **argv) { size_t argc; char **new_argv; size_t i; /* Count number of arguments. */ for (argc = 0; argv[argc] != NULL; argc++) ; /* Allocate new argument vector. */ new_argv = XMALLOC (char *, argc + 1); /* Put quoted arguments into the new argument vector. */ for (i = 0; i < argc; i++) { const char *string = argv[i]; if (string[0] == '\0') new_argv[i] = xstrdup ("\"\""); else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) { int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); size_t length; unsigned int backslashes; const char *s; char *quoted_string; char *p; length = 0; backslashes = 0; if (quote_around) length++; for (s = string; *s != '\0'; s++) { char c = *s; if (c == '"') length += backslashes + 1; length++; if (c == '\\') backslashes++; else backslashes = 0; } if (quote_around) length += backslashes + 1; quoted_string = XMALLOC (char, length + 1); p = quoted_string; backslashes = 0; if (quote_around) *p++ = '"'; for (s = string; *s != '\0'; s++) { char c = *s; if (c == '"') { unsigned int j; for (j = backslashes + 1; j > 0; j--) *p++ = '\\'; } *p++ = c; if (c == '\\') backslashes++; else backslashes = 0; } if (quote_around) { unsigned int j; for (j = backslashes; j > 0; j--) *p++ = '\\'; *p++ = '"'; } *p = '\0'; new_argv[i] = quoted_string; } else new_argv[i] = (char *) string; } new_argv[argc] = NULL; return new_argv; } EOF ;; esac cat <<"EOF" void lt_dump_script (FILE* f) { EOF func_emit_wrapper yes | $SED -n -e ' s/^\(.\{79\}\)\(..*\)/\1\ \2/ h s/\([\\"]\)/\\\1/g s/$/\\n/ s/\([^\n]*\).*/ fputs ("\1", f);/p g D' cat <<"EOF" } EOF } # end: func_emit_cwrapperexe_src # func_win32_import_lib_p ARG # True if ARG is an import lib, as indicated by $file_magic_cmd func_win32_import_lib_p () { $debug_cmd case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in *import*) : ;; *) false ;; esac } # func_suncc_cstd_abi # !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!! # Several compiler flags select an ABI that is incompatible with the # Cstd library. Avoid specifying it if any are in CXXFLAGS. func_suncc_cstd_abi () { $debug_cmd case " $compile_command " in *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*) suncc_use_cstd_abi=no ;; *) suncc_use_cstd_abi=yes ;; esac } # func_mode_link arg... func_mode_link () { $debug_cmd case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # what system we are compiling for in order to pass an extra # flag for every libtool invocation. # allow_undefined=no # FIXME: Unfortunately, there are problems with the above when trying # to make a dll that has undefined symbols, in which case not # even a static library is built. For now, we need to specify # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. allow_undefined=yes ;; *) allow_undefined=yes ;; esac libtool_args=$nonopt base_compile="$nonopt $@" compile_command=$nonopt finalize_command=$nonopt compile_rpath= finalize_rpath= compile_shlibpath= finalize_shlibpath= convenience= old_convenience= deplibs= old_deplibs= compiler_flags= linker_flags= dllsearchpath= lib_search_path=`pwd` inst_prefix_dir= new_inherited_linker_flags= avoid_version=no bindir= dlfiles= dlprefiles= dlself=no export_dynamic=no export_symbols= export_symbols_regex= generated= libobjs= ltlibs= module=no no_install=no objs= os2dllname= non_pic_objects= precious_files_regex= prefer_static_libs=no preload=false prev= prevarg= release= rpath= xrpath= perm_rpath= temp_rpath= thread_safe=no vinfo= vinfo_number=no weak_libs= single_module=$wl-single_module func_infer_tag $base_compile # We need to know -static, to get the right output filenames. for arg do case $arg in -shared) test yes != "$build_libtool_libs" \ && func_fatal_configuration "cannot build a shared library" build_old_libs=no break ;; -all-static | -static | -static-libtool-libs) case $arg in -all-static) if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then func_warning "complete static linking is impossible in this configuration" fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; -static) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=built ;; -static-libtool-libs) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; esac build_libtool_libs=no build_old_libs=yes break ;; esac done # See if our shared archives depend on static archives. test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. while test "$#" -gt 0; do arg=$1 shift func_quote_for_eval "$arg" qarg=$func_quote_for_eval_unquoted_result func_append libtool_args " $func_quote_for_eval_result" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) func_append compile_command " @OUTPUT@" func_append finalize_command " @OUTPUT@" ;; esac case $prev in bindir) bindir=$arg prev= continue ;; dlfiles|dlprefiles) $preload || { # Add the symbol object into the linking commands. func_append compile_command " @SYMFILE@" func_append finalize_command " @SYMFILE@" preload=: } case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test no = "$dlself"; then dlself=needless export_dynamic=yes fi prev= continue ;; self) if test dlprefiles = "$prev"; then dlself=yes elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then dlself=yes else dlself=needless export_dynamic=yes fi prev= continue ;; *) if test dlfiles = "$prev"; then func_append dlfiles " $arg" else func_append dlprefiles " $arg" fi prev= continue ;; esac ;; expsyms) export_symbols=$arg test -f "$arg" \ || func_fatal_error "symbol file '$arg' does not exist" prev= continue ;; expsyms_regex) export_symbols_regex=$arg prev= continue ;; framework) case $host in *-*-darwin*) case "$deplibs " in *" $qarg.ltframework "*) ;; *) func_append deplibs " $qarg.ltframework" # this is fixed later ;; esac ;; esac prev= continue ;; inst_prefix) inst_prefix_dir=$arg prev= continue ;; mllvm) # Clang does not use LLVM to link, so we can simply discard any # '-mllvm $arg' options when doing the link step. prev= continue ;; objectlist) if test -f "$arg"; then save_arg=$arg moreargs= for fil in `cat "$save_arg"` do # func_append moreargs " $fil" arg=$fil # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test none = "$pic_object" && test none = "$non_pic_object"; then func_fatal_error "cannot find name of object for '$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir=$func_dirname_result if test none != "$pic_object"; then # Prepend the subdirectory the object is found in. pic_object=$xdir$pic_object if test dlfiles = "$prev"; then if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then func_append dlfiles " $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test dlprefiles = "$prev"; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg=$pic_object fi # Non-PIC object. if test none != "$non_pic_object"; then # Prepend the subdirectory the object is found in. non_pic_object=$xdir$non_pic_object # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test none = "$pic_object"; then arg=$non_pic_object fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object=$pic_object func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir=$func_dirname_result func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "'$arg' is not a valid libtool object" fi fi done else func_fatal_error "link input file '$arg' does not exist" fi arg=$save_arg prev= continue ;; os2dllname) os2dllname=$arg prev= continue ;; precious_regex) precious_files_regex=$arg prev= continue ;; release) release=-$arg prev= continue ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac if test rpath = "$prev"; then case "$rpath " in *" $arg "*) ;; *) func_append rpath " $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; *) func_append xrpath " $arg" ;; esac fi prev= continue ;; shrext) shrext_cmds=$arg prev= continue ;; weak) func_append weak_libs " $arg" prev= continue ;; xcclinker) func_append linker_flags " $qarg" func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xcompiler) func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xlinker) func_append linker_flags " $qarg" func_append compiler_flags " $wl$qarg" prev= func_append compile_command " $wl$qarg" func_append finalize_command " $wl$qarg" continue ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac fi # test -n "$prev" prevarg=$arg case $arg in -all-static) if test -n "$link_static_flag"; then # See comment for -static flag below, for more details. func_append compile_command " $link_static_flag" func_append finalize_command " $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. func_fatal_error "'-allow-undefined' must not be used because it is the default" ;; -avoid-version) avoid_version=yes continue ;; -bindir) prev=bindir continue ;; -dlopen) prev=dlfiles continue ;; -dlpreopen) prev=dlprefiles continue ;; -export-dynamic) export_dynamic=yes continue ;; -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then func_fatal_error "more than one -exported-symbols argument is not allowed" fi if test X-export-symbols = "X$arg"; then prev=expsyms else prev=expsyms_regex fi continue ;; -framework) prev=framework continue ;; -inst-prefix-dir) prev=inst_prefix continue ;; # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix* | /*-*-irix*) func_append compile_command " $arg" func_append finalize_command " $arg" ;; esac continue ;; -L*) func_stripname "-L" '' "$arg" if test -z "$func_stripname_result"; then if test "$#" -gt 0; then func_fatal_error "require no space between '-L' and '$1'" else func_fatal_error "need path for '-L' option" fi fi func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` test -z "$absdir" && \ func_fatal_error "cannot determine absolute directory name of '$dir'" dir=$absdir ;; esac case "$deplibs " in *" -L$dir "* | *" $arg "*) # Will only happen for absolute or sysroot arguments ;; *) # Preserve sysroot, but never include relative directories case $dir in [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; *) func_append deplibs " -L$dir" ;; esac func_append lib_search_path " $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; ::) dllsearchpath=$dir;; *) func_append dllsearchpath ":$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) func_append dllsearchpath ":$testbindir";; esac ;; esac continue ;; -l*) if test X-lc = "X$arg" || test X-lm = "X$arg"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) # These systems don't actually have a C or math library (as such) continue ;; *-*-os2*) # These systems don't actually have a C library (as such) test X-lc = "X$arg" && continue ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) # Do not include libc due to us having libc/libc_r. test X-lc = "X$arg" && continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework func_append deplibs " System.ltframework" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype test X-lc = "X$arg" && continue ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work test X-lc = "X$arg" && continue ;; esac elif test X-lc_r = "X$arg"; then case $host in *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) # Do not include libc_r directly, use -pthread flag. continue ;; esac fi func_append deplibs " $arg" continue ;; -mllvm) prev=mllvm continue ;; -module) module=yes continue ;; # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. # Darwin uses the -arch flag to determine output architecture. -model|-arch|-isysroot|--sysroot) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" prev=xcompiler continue ;; -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" case "$new_inherited_linker_flags " in *" $arg "*) ;; * ) func_append new_inherited_linker_flags " $arg" ;; esac continue ;; -multi_module) single_module=$wl-multi_module continue ;; -no-fast-install) fast_install=no continue ;; -no-install) case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) # The PATH hackery in wrapper scripts is required on Windows # and Darwin in order for the loader to find any dlls it needs. func_warning "'-no-install' is ignored for $host" func_warning "assuming '-no-fast-install' instead" fast_install=no ;; *) no_install=yes ;; esac continue ;; -no-undefined) allow_undefined=no continue ;; -objectlist) prev=objectlist continue ;; -os2dllname) prev=os2dllname continue ;; -o) prev=output ;; -precious-files-regex) prev=precious_regex continue ;; -release) prev=release continue ;; -rpath) prev=rpath continue ;; -R) prev=xrpath continue ;; -R*) func_stripname '-R' '' "$arg" dir=$func_stripname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; =*) func_stripname '=' '' "$dir" dir=$lt_sysroot$func_stripname_result ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac case "$xrpath " in *" $dir "*) ;; *) func_append xrpath " $dir" ;; esac continue ;; -shared) # The effects of -shared are defined in a previous loop. continue ;; -shrext) prev=shrext continue ;; -static | -static-libtool-libs) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects # would be equivalent was wrong. It would break on at least # Digital Unix and AIX. continue ;; -thread-safe) thread_safe=yes continue ;; -version-info) prev=vinfo continue ;; -version-number) prev=vinfo vinfo_number=yes continue ;; -weak) prev=weak continue ;; -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result arg= save_ifs=$IFS; IFS=, for flag in $args; do IFS=$save_ifs func_quote_for_eval "$flag" func_append arg " $func_quote_for_eval_result" func_append compiler_flags " $func_quote_for_eval_result" done IFS=$save_ifs func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Wl,*) func_stripname '-Wl,' '' "$arg" args=$func_stripname_result arg= save_ifs=$IFS; IFS=, for flag in $args; do IFS=$save_ifs func_quote_for_eval "$flag" func_append arg " $wl$func_quote_for_eval_result" func_append compiler_flags " $wl$func_quote_for_eval_result" func_append linker_flags " $func_quote_for_eval_result" done IFS=$save_ifs func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Xcompiler) prev=xcompiler continue ;; -Xlinker) prev=xlinker continue ;; -XCClinker) prev=xcclinker continue ;; # -msg_* for osf cc -msg_*) func_quote_for_eval "$arg" arg=$func_quote_for_eval_result ;; # Flags to be passed through unchanged, with rationale: # -64, -mips[0-9] enable 64-bit mode for the SGI compiler # -r[0-9][0-9]* specify processor for the SGI compiler # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler # +DA*, +DD* enable 64-bit mode for the HP compiler # -q* compiler args for the IBM compiler # -m*, -t[45]*, -txscale* architecture-specific flags for GCC # -F/path path to uninstalled frameworks, gcc on darwin # -p, -pg, --coverage, -fprofile-* profiling flags for GCC # -fstack-protector* stack protector flags for GCC # @file GCC response files # -tp=* Portland pgcc target processor selection # --sysroot=* for sysroot support # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization # -specs=* GCC specs files # -stdlib=* select c++ std lib with clang # -fsanitize=* Clang/GCC memory and address sanitizer # -fuse-ld=* Linker select flags for GCC # -static-* direct GCC to link specific libraries statically # -fcilkplus Cilk Plus language extension features for C/C++ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*| \ -specs=*|-fsanitize=*|-fuse-ld=*|-static-*|-fcilkplus) func_quote_for_eval "$arg" arg=$func_quote_for_eval_result func_append compile_command " $arg" func_append finalize_command " $arg" func_append compiler_flags " $arg" continue ;; -Z*) if test os2 = "`expr $host : '.*\(os2\)'`"; then # OS/2 uses -Zxxx to specify OS/2-specific options compiler_flags="$compiler_flags $arg" func_append compile_command " $arg" func_append finalize_command " $arg" case $arg in -Zlinker | -Zstack) prev=xcompiler ;; esac continue else # Otherwise treat like 'Some other compiler flag' below func_quote_for_eval "$arg" arg=$func_quote_for_eval_result fi ;; # Some other compiler flag. -* | +*) func_quote_for_eval "$arg" arg=$func_quote_for_eval_result ;; *.$objext) # A standard object. func_append objs " $arg" ;; *.lo) # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test none = "$pic_object" && test none = "$non_pic_object"; then func_fatal_error "cannot find name of object for '$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir=$func_dirname_result test none = "$pic_object" || { # Prepend the subdirectory the object is found in. pic_object=$xdir$pic_object if test dlfiles = "$prev"; then if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then func_append dlfiles " $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test dlprefiles = "$prev"; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg=$pic_object } # Non-PIC object. if test none != "$non_pic_object"; then # Prepend the subdirectory the object is found in. non_pic_object=$xdir$non_pic_object # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test none = "$pic_object"; then arg=$non_pic_object fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object=$pic_object func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir=$func_dirname_result func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "'$arg' is not a valid libtool object" fi fi ;; *.$libext) # An archive. func_append deplibs " $arg" func_append old_deplibs " $arg" continue ;; *.la) # A libtool-controlled library. func_resolve_sysroot "$arg" if test dlfiles = "$prev"; then # This library was specified with -dlopen. func_append dlfiles " $func_resolve_sysroot_result" prev= elif test dlprefiles = "$prev"; then # The library was specified with -dlpreopen. func_append dlprefiles " $func_resolve_sysroot_result" prev= else func_append deplibs " $func_resolve_sysroot_result" fi continue ;; # Some other compiler argument. *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. func_quote_for_eval "$arg" arg=$func_quote_for_eval_result ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then func_append compile_command " $arg" func_append finalize_command " $arg" fi done # argument parsing loop test -n "$prev" && \ func_fatal_help "the '$prevarg' option requires an argument" if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" func_append compile_command " $arg" func_append finalize_command " $arg" fi oldlibs= # calculate the name of the file, without its directory func_basename "$output" outputname=$func_basename_result libobjs_save=$libobjs if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" # Definition is injected by LT_CONFIG during libtool generation. func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH" func_dirname "$output" "/" "" output_objdir=$func_dirname_result$objdir func_to_tool_file "$output_objdir/" tool_output_objdir=$func_to_tool_file_result # Create the object directory. func_mkdir_p "$output_objdir" # Determine the type of output case $output in "") func_fatal_help "you must specify an output file" ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; *.la) linkmode=lib ;; *) linkmode=prog ;; # Anything else should be a program. esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do if $opt_preserve_dup_deps; then case "$libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append libs " $deplib" done if test lib = "$linkmode"; then libs="$predeps $libs $compiler_lib_search_path $postdeps" # Compute libraries that are listed more than once in $predeps # $postdeps and mark them as special (i.e., whose duplicates are # not to be eliminated). pre_post_deps= if $opt_duplicate_compiler_generated_deps; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; esac func_append pre_post_deps " $pre_post_dep" done fi pre_post_deps= fi deplibs= newdependency_libs= newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries notinst_path= # paths that contain not-installed libtool libraries case $linkmode in lib) passes="conv dlpreopen link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) func_fatal_help "libraries can '-dlopen' only libtool libraries: $file" ;; esac done ;; prog) compile_deplibs= finalize_deplibs= alldeplibs=false newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" ;; *) passes="conv" ;; esac for pass in $passes; do # The preopen pass in lib mode reverses $deplibs; put it back here # so that -L comes before libs that need it for instance... if test lib,link = "$linkmode,$pass"; then ## FIXME: Find the place where the list is rebuilt in the wrong ## order, and fix it there properly tmp_deplibs= for deplib in $deplibs; do tmp_deplibs="$deplib $tmp_deplibs" done deplibs=$tmp_deplibs fi if test lib,link = "$linkmode,$pass" || test prog,scan = "$linkmode,$pass"; then libs=$deplibs deplibs= fi if test prog = "$linkmode"; then case $pass in dlopen) libs=$dlfiles ;; dlpreopen) libs=$dlprefiles ;; link) libs="$deplibs %DEPLIBS%" test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ;; esac fi if test lib,dlpreopen = "$linkmode,$pass"; then # Collect and forward deplibs of preopened libtool libs for lib in $dlprefiles; do # Ignore non-libtool-libs dependency_libs= func_resolve_sysroot "$lib" case $lib in *.la) func_source "$func_resolve_sysroot_result" ;; esac # Collect preopened libtool deplibs, except any this library # has declared as weak libs for deplib in $dependency_libs; do func_basename "$deplib" deplib_base=$func_basename_result case " $weak_libs " in *" $deplib_base "*) ;; *) func_append deplibs " $deplib" ;; esac done done libs=$dlprefiles fi if test dlopen = "$pass"; then # Collect dlpreopened libraries save_deplibs=$deplibs deplibs= fi for deplib in $libs; do lib= found=false case $deplib in -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) if test prog,link = "$linkmode,$pass"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append compiler_flags " $deplib" if test lib = "$linkmode"; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; esac fi fi continue ;; -l*) if test lib != "$linkmode" && test prog != "$linkmode"; then func_warning "'-l' is ignored for archives/objects" continue fi func_stripname '-l' '' "$deplib" name=$func_stripname_result if test lib = "$linkmode"; then searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" else searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" fi for searchdir in $searchdirs; do for search_ext in .la $std_shrext .so .a; do # Search the libtool library lib=$searchdir/lib$name$search_ext if test -f "$lib"; then if test .la = "$search_ext"; then found=: else found=false fi break 2 fi done done if $found; then # deplib is a libtool library # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, # We need to do some special things here, and not later. if test yes = "$allow_libtool_libs_with_static_runtimes"; then case " $predeps $postdeps " in *" $deplib "*) if func_lalib_p "$lib"; then library_names= old_library= func_source "$lib" for l in $old_library $library_names; do ll=$l done if test "X$ll" = "X$old_library"; then # only static version available found=false func_dirname "$lib" "" "." ladir=$func_dirname_result lib=$ladir/$old_library if test prog,link = "$linkmode,$pass"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs" fi continue fi fi ;; *) ;; esac fi else # deplib doesn't seem to be a libtool library if test prog,link = "$linkmode,$pass"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs" fi continue fi ;; # -l *.ltframework) if test prog,link = "$linkmode,$pass"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" if test lib = "$linkmode"; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; esac fi fi continue ;; -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test conv = "$pass" && continue newdependency_libs="$deplib $newdependency_libs" func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; prog) if test conv = "$pass"; then deplibs="$deplib $deplibs" continue fi if test scan = "$pass"; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; *) func_warning "'-L' is ignored for archives/objects" ;; esac # linkmode continue ;; # -L -R*) if test link = "$pass"; then func_stripname '-R' '' "$deplib" func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; *) func_append xrpath " $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; *.la) func_resolve_sysroot "$deplib" lib=$func_resolve_sysroot_result ;; *.$libext) if test conv = "$pass"; then deplibs="$deplib $deplibs" continue fi case $linkmode in lib) # Linking convenience modules into shared libraries is allowed, # but linking other static libraries is non-portable. case " $dlpreconveniencelibs " in *" $deplib "*) ;; *) valid_a_lib=false case $deplibs_check_method in match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then valid_a_lib=: fi ;; pass_all) valid_a_lib=: ;; esac if $valid_a_lib; then echo $ECHO "*** Warning: Linking the shared library $output against the" $ECHO "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" else echo $ECHO "*** Warning: Trying to link with static lib archive $deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because the file extensions .$libext of this argument makes me believe" echo "*** that it is just a static archive that I should not use here." fi ;; esac continue ;; prog) if test link != "$pass"; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi continue ;; esac # linkmode ;; # *.$libext *.lo | *.$objext) if test conv = "$pass"; then deplibs="$deplib $deplibs" elif test prog = "$linkmode"; then if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then # If there is no dlopen support or we're linking statically, # we need to preload. func_append newdlprefiles " $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append newdlfiles " $deplib" fi fi continue ;; %DEPLIBS%) alldeplibs=: continue ;; esac # case $deplib $found || test -f "$lib" \ || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'" # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$lib" \ || func_fatal_error "'$lib' is not a valid libtool archive" func_dirname "$lib" "" "." ladir=$func_dirname_result dlname= dlopen= dlpreopen= libdir= library_names= old_library= inherited_linker_flags= # If the library was installed with an old release of libtool, # it will not redefine variables installed, or shouldnotlink installed=yes shouldnotlink=no avoidtemprpath= # Read the .la file func_source "$lib" # Convert "-framework foo" to "foo.ltframework" if test -n "$inherited_linker_flags"; then tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do case " $new_inherited_linker_flags " in *" $tmp_inherited_linker_flag "*) ;; *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; esac done fi dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` if test lib,link = "$linkmode,$pass" || test prog,scan = "$linkmode,$pass" || { test prog != "$linkmode" && test lib != "$linkmode"; }; then test -n "$dlopen" && func_append dlfiles " $dlopen" test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" fi if test conv = "$pass"; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then func_fatal_error "cannot find name of link library for '$lib'" fi # It is a libtool convenience library, so add in its objects. func_append convenience " $ladir/$objdir/$old_library" func_append old_convenience " $ladir/$objdir/$old_library" tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" if $opt_preserve_dup_deps; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done elif test prog != "$linkmode" && test lib != "$linkmode"; then func_fatal_error "'$lib' is not a convenience library" fi continue fi # $pass = conv # Get the name of the library we link against. linklib= if test -n "$old_library" && { test yes = "$prefer_static_libs" || test built,no = "$prefer_static_libs,$installed"; }; then linklib=$old_library else for l in $old_library $library_names; do linklib=$l done fi if test -z "$linklib"; then func_fatal_error "cannot find name of link library for '$lib'" fi # This library was specified with -dlopen. if test dlopen = "$pass"; then test -z "$libdir" \ && func_fatal_error "cannot -dlopen a convenience library: '$lib'" if test -z "$dlname" || test yes != "$dlopen_support" || test no = "$build_libtool_libs" then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. func_append dlprefiles " $lib $dependency_libs" else func_append newdlfiles " $lib" fi continue fi # $pass = dlopen # We need an absolute path. case $ladir in [\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then func_warning "cannot determine absolute directory name of '$ladir'" func_warning "passing it literally to the linker, although it might fail" abs_ladir=$ladir fi ;; esac func_basename "$lib" laname=$func_basename_result # Find the relevant object directory and library name. if test yes = "$installed"; then if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then func_warning "library '$lib' was moved." dir=$ladir absdir=$abs_ladir libdir=$abs_ladir else dir=$lt_sysroot$libdir absdir=$lt_sysroot$libdir fi test yes = "$hardcode_automatic" && avoidtemprpath=yes else if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then dir=$ladir absdir=$abs_ladir # Remove this search path later func_append notinst_path " $abs_ladir" else dir=$ladir/$objdir absdir=$abs_ladir/$objdir # Remove this search path later func_append notinst_path " $abs_ladir" fi fi # $installed = yes func_stripname 'lib' '.la' "$laname" name=$func_stripname_result # This library was specified with -dlpreopen. if test dlpreopen = "$pass"; then if test -z "$libdir" && test prog = "$linkmode"; then func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'" fi case $host in # special handling for platforms with PE-DLLs. *cygwin* | *mingw* | *cegcc* ) # Linker will automatically link against shared library if both # static and shared are present. Therefore, ensure we extract # symbols from the import library if a shared library is present # (otherwise, the dlopen module name will be incorrect). We do # this by putting the import library name into $newdlprefiles. # We recover the dlopen module name by 'saving' the la file # name in a special purpose variable, and (later) extracting the # dlname from the la file. if test -n "$dlname"; then func_tr_sh "$dir/$linklib" eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" func_append newdlprefiles " $dir/$linklib" else func_append newdlprefiles " $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ func_append dlpreconveniencelibs " $dir/$old_library" fi ;; * ) # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then func_append newdlprefiles " $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ func_append dlpreconveniencelibs " $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then func_append newdlprefiles " $dir/$dlname" else func_append newdlprefiles " $dir/$linklib" fi ;; esac fi # $pass = dlpreopen if test -z "$libdir"; then # Link the convenience library if test lib = "$linkmode"; then deplibs="$dir/$old_library $deplibs" elif test prog,link = "$linkmode,$pass"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else deplibs="$lib $deplibs" # used for prog,scan pass fi continue fi if test prog = "$linkmode" && test link != "$pass"; then func_append newlib_search_path " $ladir" deplibs="$lib $deplibs" linkalldeplibs=false if test no != "$link_all_deplibs" || test -z "$library_names" || test no = "$build_libtool_libs"; then linkalldeplibs=: fi tmp_libs= for deplib in $dependency_libs; do case $deplib in -L*) func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; esac # Need to link against all dependency_libs? if $linkalldeplibs; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi if $opt_preserve_dup_deps; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done # for deplib continue fi # $linkmode = prog... if test prog,link = "$linkmode,$pass"; then if test -n "$library_names" && { { test no = "$prefer_static_libs" || test built,yes = "$prefer_static_libs,$installed"; } || test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then # Make sure the rpath contains only unique directories. case $temp_rpath: in *"$absdir:"*) ;; *) func_append temp_rpath "$absdir:" ;; esac fi # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) func_append compile_rpath " $absdir" ;; esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac ;; esac fi # $linkmode,$pass = prog,link... if $alldeplibs && { test pass_all = "$deplibs_check_method" || { test yes = "$build_libtool_libs" && test -n "$library_names"; }; }; then # We only need to search for static libraries continue fi fi link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs if test built = "$use_static_libs" && test yes = "$installed"; then use_static_libs=no fi if test -n "$library_names" && { test no = "$use_static_libs" || test -z "$old_library"; }; then case $host in *cygwin* | *mingw* | *cegcc* | *os2*) # No point in relinking DLLs because paths are not encoded func_append notinst_deplibs " $lib" need_relink=no ;; *) if test no = "$installed"; then func_append notinst_deplibs " $lib" need_relink=yes fi ;; esac # This is a shared library # Warn about portability, can't link against -module's on some # systems (darwin). Don't bleat about dlopened modules though! dlopenmodule= for dlpremoduletest in $dlprefiles; do if test "X$dlpremoduletest" = "X$lib"; then dlopenmodule=$dlpremoduletest break fi done if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then echo if test prog = "$linkmode"; then $ECHO "*** Warning: Linking the executable $output against the loadable module" else $ECHO "*** Warning: Linking the shared library $output against the loadable module" fi $ECHO "*** $linklib is not portable!" fi if test lib = "$linkmode" && test yes = "$hardcode_into_libs"; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) func_append compile_rpath " $absdir" ;; esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac ;; esac fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names shift realname=$1 shift libname=`eval "\\$ECHO \"$libname_spec\""` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname=$dlname elif test -n "$soname_spec"; then # bleh windows case $host in *cygwin* | mingw* | *cegcc* | *os2*) func_arith $current - $age major=$func_arith_result versuffix=-$major ;; esac eval soname=\"$soname_spec\" else soname=$realname fi # Make a new name for the extract_expsyms_cmds to use soroot=$soname func_basename "$soroot" soname=$func_basename_result func_stripname 'lib' '.dll' "$soname" newlib=libimp-$func_stripname_result.a # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else func_verbose "extracting exported symbol list from '$soname'" func_execute_cmds "$extract_expsyms_cmds" 'exit $?' fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else func_verbose "generating import library for '$soname'" func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' fi # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" if test prog = "$linkmode" || test relink != "$opt_mode"; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) if test no = "$hardcode_direct"; then add=$dir/$linklib case $host in *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;; *-*-sysv4*uw2*) add_dir=-L$dir ;; *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ *-*-unixware7*) add_dir=-L$dir ;; *-*-darwin* ) # if the lib is a (non-dlopened) module then we cannot # link against it, someone is ignoring the earlier warnings if /usr/bin/file -L $add 2> /dev/null | $GREP ": [^:]* bundle" >/dev/null; then if test "X$dlopenmodule" != "X$lib"; then $ECHO "*** Warning: lib $linklib is a module, not a shared library" if test -z "$old_library"; then echo echo "*** And there doesn't seem to be a static archive available" echo "*** The link will probably fail, sorry" else add=$dir/$old_library fi elif test -n "$old_library"; then add=$dir/$old_library fi fi esac elif test no = "$hardcode_minus_L"; then case $host in *-*-sunos*) add_shlibpath=$dir ;; esac add_dir=-L$dir add=-l$name elif test no = "$hardcode_shlibpath_var"; then add_shlibpath=$dir add=-l$name else lib_linked=no fi ;; relink) if test yes = "$hardcode_direct" && test no = "$hardcode_direct_absolute"; then add=$dir/$linklib elif test yes = "$hardcode_minus_L"; then add_dir=-L$absdir # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi add=-l$name elif test yes = "$hardcode_shlibpath_var"; then add_shlibpath=$dir add=-l$name else lib_linked=no fi ;; *) lib_linked=no ;; esac if test yes != "$lib_linked"; then func_fatal_configuration "unsupported hardcode properties" fi if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; *) func_append compile_shlibpath "$add_shlibpath:" ;; esac fi if test prog = "$linkmode"; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" if test yes != "$hardcode_direct" && test yes != "$hardcode_minus_L" && test yes = "$hardcode_shlibpath_var"; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac fi fi fi if test prog = "$linkmode" || test relink = "$opt_mode"; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. if test yes = "$hardcode_direct" && test no = "$hardcode_direct_absolute"; then add=$libdir/$linklib elif test yes = "$hardcode_minus_L"; then add_dir=-L$libdir add=-l$name elif test yes = "$hardcode_shlibpath_var"; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac add=-l$name elif test yes = "$hardcode_automatic"; then if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib"; then add=$inst_prefix_dir$libdir/$linklib else add=$libdir/$linklib fi else # We cannot seem to hardcode it, guess we'll fake it. add_dir=-L$libdir # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi add=-l$name fi if test prog = "$linkmode"; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" fi fi elif test prog = "$linkmode"; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. if test unsupported != "$hardcode_direct"; then test -n "$old_library" && linklib=$old_library compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi elif test yes = "$build_libtool_libs"; then # Not a shared library if test pass_all != "$deplibs_check_method"; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. echo $ECHO "*** Warning: This system cannot link to static lib archive $lib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." if test yes = "$module"; then echo "*** But as you try to build a module library, libtool will still create " echo "*** a static module, that should work as long as the dlopening application" echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using 'nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** 'nm' from GNU binutils and a full rebuild may help." fi if test no = "$build_old_libs"; then build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi else deplibs="$dir/$old_library $deplibs" link_static=yes fi fi # link shared/static library? if test lib = "$linkmode"; then if test -n "$dependency_libs" && { test yes != "$hardcode_into_libs" || test yes = "$build_old_libs" || test yes = "$link_static"; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do case $libdir in -R*) func_stripname '-R' '' "$libdir" temp_xrpath=$func_stripname_result case " $xrpath " in *" $temp_xrpath "*) ;; *) func_append xrpath " $temp_xrpath";; esac;; *) func_append temp_deplibs " $libdir";; esac done dependency_libs=$temp_deplibs fi func_append newlib_search_path " $absdir" # Link against this library test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" case $deplib in -L*) func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result";; *) func_resolve_sysroot "$deplib" ;; esac if $opt_preserve_dup_deps; then case "$tmp_libs " in *" $func_resolve_sysroot_result "*) func_append specialdeplibs " $func_resolve_sysroot_result" ;; esac fi func_append tmp_libs " $func_resolve_sysroot_result" done if test no != "$link_all_deplibs"; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do path= case $deplib in -L*) path=$deplib ;; *.la) func_resolve_sysroot "$deplib" deplib=$func_resolve_sysroot_result func_dirname "$deplib" "" "." dir=$func_dirname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then func_warning "cannot determine absolute directory name of '$dir'" absdir=$dir fi ;; esac if $GREP "^installed=no" $deplib > /dev/null; then case $host in *-*-darwin*) depdepl= eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` if test -n "$deplibrary_names"; then for tmp in $deplibrary_names; do depdepl=$tmp done if test -f "$absdir/$objdir/$depdepl"; then depdepl=$absdir/$objdir/$depdepl darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` if test -z "$darwin_install_name"; then darwin_install_name=`$OTOOL64 -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` fi func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl" func_append linker_flags " -dylib_file $darwin_install_name:$depdepl" path= fi fi ;; *) path=-L$absdir/$objdir ;; esac else eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "'$deplib' is not a valid libtool archive" test "$absdir" != "$libdir" && \ func_warning "'$deplib' seems to be moved" path=-L$absdir fi ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$path $deplibs" ;; esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs if test link = "$pass"; then if test prog = "$linkmode"; then compile_deplibs="$new_inherited_linker_flags $compile_deplibs" finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" else compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` fi fi dependency_libs=$newdependency_libs if test dlpreopen = "$pass"; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi if test dlopen != "$pass"; then test conv = "$pass" || { # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; *) func_append lib_search_path " $dir" ;; esac done newlib_search_path= } if test prog,link = "$linkmode,$pass"; then vars="compile_deplibs finalize_deplibs" else vars=deplibs fi for var in $vars dependency_libs; do # Add libraries to $var in reverse order eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do # FIXME: Pedantically, this is the right thing to do, so # that some nasty dependency loop isn't accidentally # broken: #new_libs="$deplib $new_libs" # Pragmatically, this seems to cause very few problems in # practice: case $deplib in -L*) new_libs="$deplib $new_libs" ;; -R*) ;; *) # And here is the reason: when a library appears more # than once as an explicit dependence of a library, or # is implicitly linked in more than once by the # compiler, it is considered special, and multiple # occurrences thereof are not removed. Compare this # with having the same library being listed as a # dependency of multiple other libraries: in this case, # we know (pedantically, we assume) the library does not # need to be listed more than once, so we keep only the # last copy. This is not always right, but it is rare # enough that we require users that really mean to play # such unportable linking tricks to link the library # using -Wl,-lname, so that libtool does not consider it # for duplicate removal. case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$deplib $new_libs" ;; esac ;; esac ;; esac done tmp_libs= for deplib in $new_libs; do case $deplib in -L*) case " $tmp_libs " in *" $deplib "*) ;; *) func_append tmp_libs " $deplib" ;; esac ;; *) func_append tmp_libs " $deplib" ;; esac done eval $var=\"$tmp_libs\" done # for var fi # Add Sun CC postdeps if required: test CXX = "$tagname" && { case $host_os in linux*) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 func_suncc_cstd_abi if test no != "$suncc_use_cstd_abi"; then func_append postdeps ' -library=Cstd -library=Crun' fi ;; esac ;; solaris*) func_cc_basename "$CC" case $func_cc_basename_result in CC* | sunCC*) func_suncc_cstd_abi if test no != "$suncc_use_cstd_abi"; then func_append postdeps ' -library=Cstd -library=Crun' fi ;; esac ;; esac } # Last step: remove runtime libs from dependency_libs # (they stay in deplibs) tmp_libs= for i in $dependency_libs; do case " $predeps $postdeps $compiler_lib_search_path " in *" $i "*) i= ;; esac if test -n "$i"; then func_append tmp_libs " $i" fi done dependency_libs=$tmp_libs done # for pass if test prog = "$linkmode"; then dlfiles=$newdlfiles fi if test prog = "$linkmode" || test lib = "$linkmode"; then dlprefiles=$newdlprefiles fi case $linkmode in oldlib) if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then func_warning "'-dlopen' is ignored for archives" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "'-l' and '-L' are ignored for archives" ;; esac test -n "$rpath" && \ func_warning "'-rpath' is ignored for archives" test -n "$xrpath" && \ func_warning "'-R' is ignored for archives" test -n "$vinfo" && \ func_warning "'-version-info/-version-number' is ignored for archives" test -n "$release" && \ func_warning "'-release' is ignored for archives" test -n "$export_symbols$export_symbols_regex" && \ func_warning "'-export-symbols' is ignored for archives" # Now set the variables for building old libraries. build_libtool_libs=no oldlibs=$output func_append objs "$old_deplibs" ;; lib) # Make sure we only generate libraries of the form 'libNAME.la'. case $outputname in lib*) func_stripname 'lib' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) test no = "$module" \ && func_fatal_help "libtool library '$output' must begin with 'lib'" if test no != "$need_lib_prefix"; then # Add the "lib" prefix for modules if required func_stripname '' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else func_stripname '' '.la' "$outputname" libname=$func_stripname_result fi ;; esac if test -n "$objs"; then if test pass_all != "$deplibs_check_method"; then func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs" else echo $ECHO "*** Warning: Linking the shared library $output against the non-libtool" $ECHO "*** objects $objs is not portable!" func_append libobjs " $objs" fi fi test no = "$dlself" \ || func_warning "'-dlopen self' is ignored for libtool libraries" set dummy $rpath shift test 1 -lt "$#" \ && func_warning "ignoring multiple '-rpath's for a libtool library" install_libdir=$1 oldlibs= if test -z "$rpath"; then if test yes = "$build_libtool_libs"; then # Building a libtool convenience library. # Some compilers have problems with a '.al' extension so # convenience libraries should have the same extension an # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi test -n "$vinfo" && \ func_warning "'-version-info/-version-number' is ignored for convenience libraries" test -n "$release" && \ func_warning "'-release' is ignored for convenience libraries" else # Parse the version information argument. save_ifs=$IFS; IFS=: set dummy $vinfo 0 0 0 shift IFS=$save_ifs test -n "$7" && \ func_fatal_help "too many parameters to '-version-info'" # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts # to make the code below a bit more comprehensible case $vinfo_number in yes) number_major=$1 number_minor=$2 number_revision=$3 # # There are really only two kinds -- those that # use the current revision as the major version # and those that subtract age and use age as # a minor version. But, then there is irix # that has an extra 1 added just for fun # case $version_type in # correct linux to gnu/linux during the next big refactor darwin|freebsd-elf|linux|osf|windows|none) func_arith $number_major + $number_minor current=$func_arith_result age=$number_minor revision=$number_revision ;; freebsd-aout|qnx|sunos) current=$number_major revision=$number_minor age=0 ;; irix|nonstopux) func_arith $number_major + $number_minor current=$func_arith_result age=$number_minor revision=$number_minor lt_irix_increment=no ;; *) func_fatal_configuration "$modename: unknown library version type '$version_type'" ;; esac ;; no) current=$1 revision=$2 age=$3 ;; esac # Check that each of the things are valid numbers. case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "CURRENT '$current' must be a nonnegative integer" func_fatal_error "'$vinfo' is not valid version information" ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "REVISION '$revision' must be a nonnegative integer" func_fatal_error "'$vinfo' is not valid version information" ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "AGE '$age' must be a nonnegative integer" func_fatal_error "'$vinfo' is not valid version information" ;; esac if test "$age" -gt "$current"; then func_error "AGE '$age' is greater than the current interface number '$current'" func_fatal_error "'$vinfo' is not valid version information" fi # Calculate the version variables. major= versuffix= verstring= case $version_type in none) ;; darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header func_arith $current - $age major=.$func_arith_result versuffix=$major.$age.$revision # Darwin ld doesn't like 0 for these options... func_arith $current + 1 minor_current=$func_arith_result xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision" verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" # On Darwin other compilers case $CC in nagfor*) verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision" ;; *) verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; esac ;; freebsd-aout) major=.$current versuffix=.$current.$revision ;; freebsd-elf) func_arith $current - $age major=.$func_arith_result versuffix=$major.$age.$revision ;; irix | nonstopux) if test no = "$lt_irix_increment"; then func_arith $current - $age else func_arith $current - $age + 1 fi major=$func_arith_result case $version_type in nonstopux) verstring_prefix=nonstopux ;; *) verstring_prefix=sgi ;; esac verstring=$verstring_prefix$major.$revision # Add in all the interfaces that we are compatible with. loop=$revision while test 0 -ne "$loop"; do func_arith $revision - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring=$verstring_prefix$major.$iface:$verstring done # Before this point, $major must not contain '.'. major=.$major versuffix=$major.$revision ;; linux) # correct to gnu/linux during the next big refactor func_arith $current - $age major=.$func_arith_result versuffix=$major.$age.$revision ;; osf) func_arith $current - $age major=.$func_arith_result versuffix=.$current.$age.$revision verstring=$current.$age.$revision # Add in all the interfaces that we are compatible with. loop=$age while test 0 -ne "$loop"; do func_arith $current - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring=$verstring:$iface.0 done # Make executables depend on our current version. func_append verstring ":$current.0" ;; qnx) major=.$current versuffix=.$current ;; sco) major=.$current versuffix=.$current ;; sunos) major=.$current versuffix=.$current.$revision ;; windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 file systems. func_arith $current - $age major=$func_arith_result versuffix=-$major ;; *) func_fatal_configuration "unknown library version type '$version_type'" ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely verstring= ;; *) verstring=0.0 ;; esac if test no = "$need_version"; then versuffix= else versuffix=.0.0 fi fi # Remove version info from name if versioning should be avoided if test yes,no = "$avoid_version,$need_version"; then major= versuffix= verstring= fi # Check to see if the archive will have undefined symbols. if test yes = "$allow_undefined"; then if test unsupported = "$allow_undefined_flag"; then if test yes = "$build_old_libs"; then func_warning "undefined symbols not allowed in $host shared libraries; building static only" build_libtool_libs=no else func_fatal_error "can't build $host shared library unless -no-undefined is specified" fi fi else # Don't allow undefined symbols. allow_undefined_flag=$no_undefined_flag fi fi func_generate_dlsyms "$libname" "$libname" : func_append libobjs " $symfileobj" test " " = "$libobjs" && libobjs= if test relink != "$opt_mode"; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= tempremovelist=`$ECHO "$output_objdir/*"` for p in $tempremovelist; do case $p in *.$objext | *.gcno) ;; $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*) if test -n "$precious_files_regex"; then if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 then continue fi fi func_append removelist " $p" ;; *) ;; esac done test -n "$removelist" && \ func_show_eval "${RM}r \$removelist" fi # Now set the variables for building old libraries. if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then func_append oldlibs " $output_objdir/$libname.$libext" # Transform .lo files to .o files. oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP` fi # Eliminate all temporary directories. #for path in $notinst_path; do # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do func_replace_sysroot "$libdir" func_append temp_xrpath " -R$func_replace_sysroot_result" case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac done if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened old_dlfiles=$dlfiles dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; *) func_append dlfiles " $lib" ;; esac done # Make sure dlprefiles contains only unique files old_dlprefiles=$dlprefiles dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; *) func_append dlprefiles " $lib" ;; esac done if test yes = "$build_libtool_libs"; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework func_append deplibs " System.ltframework" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work ;; *) # Add libc to deplibs on all other systems if necessary. if test yes = "$build_libtool_need_lc"; then func_append deplibs " -lc" fi ;; esac fi # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname release_save=$release versuffix_save=$versuffix major_save=$major # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? release= versuffix= major= newdeplibs= droppeddeps=no case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just # implementing what was already the behavior. newdeplibs=$deplibs ;; test_compile) # This code stresses the "libraries are programs" paradigm to its # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. $opt_dry_run || $RM conftest.c cat > conftest.c </dev/null` $nocaseglob else potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` fi for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null | $GREP " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? potlib=$potent_lib while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | $SED 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;; *) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | $SED -e 10q | $EGREP "$file_magic_regex" > /dev/null; then func_append newdeplibs " $a_deplib" a_deplib= break 2 fi done done fi if test -n "$a_deplib"; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib"; then $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a file magic. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. func_append newdeplibs " $a_deplib" ;; esac done # Gone through all deplibs. ;; match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` for a_deplib in $deplibs; do case $a_deplib in -l*) func_stripname -l '' "$a_deplib" name=$func_stripname_result if test yes = "$allow_libtool_libs_with_static_runtimes"; then case " $predeps $postdeps " in *" $a_deplib "*) func_append newdeplibs " $a_deplib" a_deplib= ;; esac fi if test -n "$a_deplib"; then libname=`eval "\\$ECHO \"$libname_spec\""` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib=$potent_lib # see symlink-check above in file_magic test if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ $EGREP "$match_pattern_regex" > /dev/null; then func_append newdeplibs " $a_deplib" a_deplib= break 2 fi done done fi if test -n "$a_deplib"; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib"; then $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a regex pattern. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. func_append newdeplibs " $a_deplib" ;; esac done # Gone through all deplibs. ;; none | unknown | *) newdeplibs= tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` if test yes = "$allow_libtool_libs_with_static_runtimes"; then for i in $predeps $postdeps; do # can't use Xsed below, because $i might contain '/' tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"` done fi case $tmp_deplibs in *[!\ \ ]*) echo if test none = "$deplibs_check_method"; then echo "*** Warning: inter-library dependencies are not supported in this platform." else echo "*** Warning: inter-library dependencies are not known to be supported." fi echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes ;; esac ;; esac versuffix=$versuffix_save major=$major_save release=$release_save libname=$libname_save name=$name_save case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library with the System framework newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac if test yes = "$droppeddeps"; then if test yes = "$module"; then echo echo "*** Warning: libtool could not satisfy all declared inter-library" $ECHO "*** dependencies of module $libname. Therefore, libtool will create" echo "*** a static module, that should work as long as the dlopening" echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using 'nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** 'nm' from GNU binutils and a full rebuild may help." fi if test no = "$build_old_libs"; then oldlibs=$output_objdir/$libname.$libext build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi else echo "*** The inter-library dependencies that have been dropped here will be" echo "*** automatically added whenever a program is linked with this library" echo "*** or is declared to -dlopen it." if test no = "$allow_undefined"; then echo echo "*** Since this library must not contain undefined symbols," echo "*** because either the platform does not support them or" echo "*** it was explicitly requested with -no-undefined," echo "*** libtool will only create a static version of it." if test no = "$build_old_libs"; then oldlibs=$output_objdir/$libname.$libext build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi fi fi # Done checking deplibs! deplibs=$newdeplibs fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" case $host in *-*-darwin*) newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $deplibs " in *" -L$path/$objdir "*) func_append new_libs " -L$path/$objdir" ;; esac ;; esac done for deplib in $deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) func_append new_libs " $deplib" ;; esac ;; *) func_append new_libs " $deplib" ;; esac done deplibs=$new_libs # All the library-specific variables (install_libdir is set above). library_names= old_library= dlname= # Test again, we may have decided not to build it any more if test yes = "$build_libtool_libs"; then # Remove $wl instances when linking with ld. # FIXME: should test the right _cmds variable. case $archive_cmds in *\$LD\ *) wl= ;; esac if test yes = "$hardcode_into_libs"; then # Hardcode the library paths hardcode_libdirs= dep_rpath= rpath=$finalize_rpath test relink = "$opt_mode" || rpath=$compile_rpath$rpath for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then func_replace_sysroot "$libdir" libdir=$func_replace_sysroot_result if test -z "$hardcode_libdirs"; then hardcode_libdirs=$libdir else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append dep_rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) func_append perm_rpath " $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir=$hardcode_libdirs eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do func_append rpath "$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi shlibpath=$finalize_shlibpath test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi # Get the real and link names of the library. eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names shift realname=$1 shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else soname=$realname fi if test -z "$dlname"; then dlname=$soname fi lib=$output_objdir/$realname linknames= for link do func_append linknames " $link" done # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` test "X$libobjs" = "X " && libobjs= delfiles= if test -n "$export_symbols" && test -n "$include_expsyms"; then $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" export_symbols=$output_objdir/$libname.uexp func_append delfiles " $export_symbols" fi orig_export_symbols= case $host_os in cygwin* | mingw* | cegcc*) if test -n "$export_symbols" && test -z "$export_symbols_regex"; then # exporting using user supplied symfile func_dll_def_p "$export_symbols" || { # and it's NOT already a .def file. Must figure out # which of the given symbols are data symbols and tag # them as such. So, trigger use of export_symbols_cmds. # export_symbols gets reassigned inside the "prepare # the list of exported symbols" if statement, so the # include_expsyms logic still works. orig_export_symbols=$export_symbols export_symbols= always_export_symbols=yes } fi ;; esac # Prepare the list of exported symbols if test -z "$export_symbols"; then if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then func_verbose "generating symbol list for '$libname.la'" export_symbols=$output_objdir/$libname.exp $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds save_ifs=$IFS; IFS='~' for cmd1 in $cmds; do IFS=$save_ifs # Take the normal branch if the nm_file_list_spec branch # doesn't work or if tool conversion is not needed. case $nm_file_list_spec~$to_tool_file_cmd in *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) try_normal_branch=yes eval cmd=\"$cmd1\" func_len " $cmd" len=$func_len_result ;; *) try_normal_branch=no ;; esac if test yes = "$try_normal_branch" \ && { test "$len" -lt "$max_cmd_len" \ || test "$max_cmd_len" -le -1; } then func_show_eval "$cmd" 'exit $?' skipped_export=false elif test -n "$nm_file_list_spec"; then func_basename "$output" output_la=$func_basename_result save_libobjs=$libobjs save_output=$output output=$output_objdir/$output_la.nm func_to_tool_file "$output" libobjs=$nm_file_list_spec$func_to_tool_file_result func_append delfiles " $output" func_verbose "creating $NM input file list: $output" for obj in $save_libobjs; do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" done > "$output" eval cmd=\"$cmd1\" func_show_eval "$cmd" 'exit $?' output=$save_output libobjs=$save_libobjs skipped_export=false else # The command line is too long to execute in one step. func_verbose "using reloadable object file for export list..." skipped_export=: # Break out early, otherwise skipped_export may be # set to false by a later but shorter cmd. break fi done IFS=$save_ifs if test -n "$export_symbols_regex" && test : != "$skipped_export"; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols=$export_symbols test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test : != "$skipped_export" && test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for '$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands, which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter func_append delfiles " $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi tmp_deplibs= for test_deplib in $deplibs; do case " $convenience " in *" $test_deplib "*) ;; *) func_append tmp_deplibs " $test_deplib" ;; esac done deplibs=$tmp_deplibs if test -n "$convenience"; then if test -n "$whole_archive_flag_spec" && test yes = "$compiler_needs_object" && test -z "$libobjs"; then # extract the archives, so we have objects to list. # TODO: could optimize this to just extract one archive. whole_archive_flag_spec= fi if test -n "$whole_archive_flag_spec"; then save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= else gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_extract_archives $gentop $convenience func_append libobjs " $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi fi if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" func_append linker_flags " $flag" fi # Make a backup of the uninstalled library when relinking if test relink = "$opt_mode"; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi # Do each of the archive commands. if test yes = "$module" && test -n "$module_cmds"; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then eval test_cmds=\"$module_expsym_cmds\" cmds=$module_expsym_cmds else eval test_cmds=\"$module_cmds\" cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then eval test_cmds=\"$archive_expsym_cmds\" cmds=$archive_expsym_cmds else eval test_cmds=\"$archive_cmds\" cmds=$archive_cmds fi fi if test : != "$skipped_export" && func_len " $test_cmds" && len=$func_len_result && test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else # The command line is too long to link in one step, link piecewise # or, if using GNU ld and skipped_export is not :, use a linker # script. # Save the value of $output and $libobjs because we want to # use them later. If we have whole_archive_flag_spec, we # want to use save_libobjs as it was before # whole_archive_flag_spec was expanded, because we can't # assume the linker understands whole_archive_flag_spec. # This may have to be revisited, in case too many # convenience libraries get linked in and end up exceeding # the spec. if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then save_libobjs=$libobjs fi save_output=$output func_basename "$output" output_la=$func_basename_result # Clear the reloadable object creation command queue and # initialize k to one. test_cmds= concat_cmds= objlist= last_robj= k=1 if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then output=$output_objdir/$output_la.lnkscript func_verbose "creating GNU ld script: $output" echo 'INPUT (' > $output for obj in $save_libobjs do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" >> $output done echo ')' >> $output func_append delfiles " $output" func_to_tool_file "$output" output=$func_to_tool_file_result elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then output=$output_objdir/$output_la.lnk func_verbose "creating linker input file list: $output" : > $output set x $save_libobjs shift firstobj= if test yes = "$compiler_needs_object"; then firstobj="$1 " shift fi for obj do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" >> $output done func_append delfiles " $output" func_to_tool_file "$output" output=$firstobj\"$file_list_spec$func_to_tool_file_result\" else if test -n "$save_libobjs"; then func_verbose "creating reloadable object files..." output=$output_objdir/$output_la-$k.$objext eval test_cmds=\"$reload_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 # Loop over the list of objects to be linked. for obj in $save_libobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result if test -z "$objlist" || test "$len" -lt "$max_cmd_len"; then func_append objlist " $obj" else # The command $test_cmds is almost too long, add a # command to the queue. if test 1 -eq "$k"; then # The first file doesn't have a previous command to add. reload_objs=$objlist eval concat_cmds=\"$reload_cmds\" else # All subsequent reloadable object files will link in # the last one created. reload_objs="$objlist $last_robj" eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" fi last_robj=$output_objdir/$output_la-$k.$objext func_arith $k + 1 k=$func_arith_result output=$output_objdir/$output_la-$k.$objext objlist=" $obj" func_len " $last_robj" func_arith $len0 + $func_len_result len=$func_arith_result fi done # Handle the remaining objects by creating one last # reloadable object file. All subsequent reloadable object # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ reload_objs="$objlist $last_robj" eval concat_cmds=\"\$concat_cmds$reload_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi func_append delfiles " $output" else output= fi ${skipped_export-false} && { func_verbose "generating symbol list for '$libname.la'" export_symbols=$output_objdir/$libname.exp $opt_dry_run || $RM $export_symbols libobjs=$output # Append the command to create the export file. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi } test -n "$save_libobjs" && func_verbose "creating a temporary reloadable object file: $output" # Loop through the commands generated above and execute them. save_ifs=$IFS; IFS='~' for cmd in $concat_cmds; do IFS=$save_ifs $opt_quiet || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test relink = "$opt_mode"; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS=$save_ifs if test -n "$export_symbols_regex" && ${skipped_export-false}; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi ${skipped_export-false} && { if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols=$export_symbols test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for '$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands, which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter func_append delfiles " $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi } libobjs=$output # Restore the value of output. output=$save_output if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= fi # Expand the library linking commands again to reset the # value of $libobjs for piecewise linking. # Do each of the archive commands. if test yes = "$module" && test -n "$module_cmds"; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then cmds=$module_expsym_cmds else cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then cmds=$archive_expsym_cmds else cmds=$archive_cmds fi fi fi if test -n "$delfiles"; then # Append the command to remove temporary files to $cmds. eval cmds=\"\$cmds~\$RM $delfiles\" fi # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_extract_archives $gentop $dlprefiles func_append libobjs " $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi save_ifs=$IFS; IFS='~' for cmd in $cmds; do IFS=$sp$nl eval cmd=\"$cmd\" IFS=$save_ifs $opt_quiet || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test relink = "$opt_mode"; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS=$save_ifs # Restore the uninstalled library and exit if test relink = "$opt_mode"; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then if test -z "$whole_archive_flag_spec"; then func_show_eval '${RM}r "$gentop"' fi fi exit $EXIT_SUCCESS fi # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' fi done # If -module or -export-dynamic was specified, set the dlname. if test yes = "$module" || test yes = "$export_dynamic"; then # On all known operating systems, these are identical. dlname=$soname fi fi ;; obj) if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then func_warning "'-dlopen' is ignored for objects" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "'-l' and '-L' are ignored for objects" ;; esac test -n "$rpath" && \ func_warning "'-rpath' is ignored for objects" test -n "$xrpath" && \ func_warning "'-R' is ignored for objects" test -n "$vinfo" && \ func_warning "'-version-info' is ignored for objects" test -n "$release" && \ func_warning "'-release' is ignored for objects" case $output in *.lo) test -n "$objs$old_deplibs" && \ func_fatal_error "cannot build library object '$output' from non-libtool objects" libobj=$output func_lo2o "$libobj" obj=$func_lo2o_result ;; *) libobj= obj=$output ;; esac # Delete the old objects. $opt_dry_run || $RM $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create # different ones for PIC/non-PIC, this we'll have to duplicate # the extraction. reload_conv_objs= gentop= # if reload_cmds runs $LD directly, get rid of -Wl from # whole_archive_flag_spec and hope we can get by with turning comma # into space. case $reload_cmds in *\$LD[\ \$]*) wl= ;; esac if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags else gentop=$output_objdir/${obj}x func_append generated " $gentop" func_extract_archives $gentop $convenience reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi # If we're not building shared, we need to use non_pic_objs test yes = "$build_libtool_libs" || libobjs=$non_pic_objects # Create the old-style object. reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs output=$obj func_execute_cmds "$reload_cmds" 'exit $?' # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS fi test yes = "$build_libtool_libs" || { if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. # $show "echo timestamp > $libobj" # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS } if test -n "$pic_flag" || test default != "$pic_mode"; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output=$libobj func_execute_cmds "$reload_cmds" 'exit $?' fi if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS ;; prog) case $host in *cygwin*) func_stripname '' '.exe' "$output" output=$func_stripname_result.exe;; esac test -n "$vinfo" && \ func_warning "'-version-info' is ignored for programs" test -n "$release" && \ func_warning "'-release' is ignored for programs" $preload \ && test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \ && func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support." case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac case $host in *-*-darwin*) # Don't allow lazy linking, it breaks C++ global constructors # But is supposedly fixed on 10.4 or later (yay!). if test CXX = "$tagname"; then case ${MACOSX_DEPLOYMENT_TARGET-10.0} in 10.[0123]) func_append compile_command " $wl-bind_at_load" func_append finalize_command " $wl-bind_at_load" ;; esac fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $compile_deplibs " in *" -L$path/$objdir "*) func_append new_libs " -L$path/$objdir" ;; esac ;; esac done for deplib in $compile_deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) func_append new_libs " $deplib" ;; esac ;; *) func_append new_libs " $deplib" ;; esac done compile_deplibs=$new_libs func_append compile_command " $compile_deplibs" func_append finalize_command " $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac done fi # Now hardcode the library paths rpath= hardcode_libdirs= for libdir in $compile_rpath $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs=$libdir else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) func_append perm_rpath " $libdir" ;; esac fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; ::) dllsearchpath=$libdir;; *) func_append dllsearchpath ":$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) func_append dllsearchpath ":$testbindir";; esac ;; esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir=$hardcode_libdirs eval rpath=\" $hardcode_libdir_flag_spec\" fi compile_rpath=$rpath rpath= hardcode_libdirs= for libdir in $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs=$libdir else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; *) func_append finalize_perm_rpath " $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir=$hardcode_libdirs eval rpath=\" $hardcode_libdir_flag_spec\" fi finalize_rpath=$rpath if test -n "$libobjs" && test yes = "$build_old_libs"; then # Transform all the library objects into standard objects. compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` fi func_generate_dlsyms "$outputname" "@PROGRAM@" false # template prelinking step if test -n "$prelink_cmds"; then func_execute_cmds "$prelink_cmds" 'exit $?' fi wrappers_required=: case $host in *cegcc* | *mingw32ce*) # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. wrappers_required=false ;; *cygwin* | *mingw* ) test yes = "$build_libtool_libs" || wrappers_required=false ;; *) if test no = "$need_relink" || test yes != "$build_libtool_libs"; then wrappers_required=false fi ;; esac $wrappers_required || { # Replace the output file specification. compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` link_command=$compile_command$compile_rpath # We have no uninstalled library dependencies, so finalize right now. exit_status=0 func_show_eval "$link_command" 'exit_status=$?' if test -n "$postlink_cmds"; then func_to_tool_file "$output" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi # Delete the generated files. if test -f "$output_objdir/${outputname}S.$objext"; then func_show_eval '$RM "$output_objdir/${outputname}S.$objext"' fi exit $exit_status } if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi if test -n "$finalize_shlibpath"; then finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" fi compile_var= finalize_var= if test -n "$runpath_var"; then if test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do func_append rpath "$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi if test -n "$finalize_perm_rpath"; then # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do func_append rpath "$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi fi if test yes = "$no_install"; then # We don't need to create a wrapper script. link_command=$compile_var$compile_command$compile_rpath # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $opt_dry_run || $RM $output # Link the executable and exit func_show_eval "$link_command" 'exit $?' if test -n "$postlink_cmds"; then func_to_tool_file "$output" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi exit $EXIT_SUCCESS fi case $hardcode_action,$fast_install in relink,*) # Fast installation is not supported link_command=$compile_var$compile_command$compile_rpath relink_command=$finalize_var$finalize_command$finalize_rpath func_warning "this platform does not like uninstalled shared libraries" func_warning "'$output' will be relinked during installation" ;; *,yes) link_command=$finalize_var$compile_command$finalize_rpath relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` ;; *,no) link_command=$compile_var$compile_command$compile_rpath relink_command=$finalize_var$finalize_command$finalize_rpath ;; *,needless) link_command=$finalize_var$compile_command$finalize_rpath relink_command= ;; esac # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname func_show_eval "$link_command" 'exit $?' if test -n "$postlink_cmds"; then func_to_tool_file "$output_objdir/$outputname" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi # Now create the wrapper script. func_verbose "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` fi # Only actually do things if not in dry run mode. $opt_dry_run || { # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in *.exe) func_stripname '' '.exe' "$output" output=$func_stripname_result ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe func_stripname '' '.exe' "$outputname" outputname=$func_stripname_result ;; *) exeext= ;; esac case $host in *cygwin* | *mingw* ) func_dirname_and_basename "$output" "" "." output_name=$func_basename_result output_path=$func_dirname_result cwrappersource=$output_path/$objdir/lt-$output_name.c cwrapper=$output_path/$output_name.exe $RM $cwrappersource $cwrapper trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 func_emit_cwrapperexe_src > $cwrappersource # The wrapper executable is built using the $host compiler, # because it contains $host paths and files. If cross- # compiling, it, like the target executable, must be # executed on the $host or under an emulation environment. $opt_dry_run || { $LTCC $LTCFLAGS -o $cwrapper $cwrappersource $STRIP $cwrapper } # Now, create the wrapper script for func_source use: func_ltwrapper_scriptname $cwrapper $RM $func_ltwrapper_scriptname_result trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 $opt_dry_run || { # note: this script will not be executed, so do not chmod. if test "x$build" = "x$host"; then $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result else func_emit_wrapper no > $func_ltwrapper_scriptname_result fi } ;; * ) $RM $output trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 func_emit_wrapper no > $output chmod +x $output ;; esac } exit $EXIT_SUCCESS ;; esac # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do case $build_libtool_libs in convenience) oldobjs="$libobjs_save $symfileobj" addlibs=$convenience build_libtool_libs=no ;; module) oldobjs=$libobjs_save addlibs=$old_convenience build_libtool_libs=no ;; *) oldobjs="$old_deplibs $non_pic_objects" $preload && test -f "$symfileobj" \ && func_append oldobjs " $symfileobj" addlibs=$old_convenience ;; esac if test -n "$addlibs"; then gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_extract_archives $gentop $addlibs func_append oldobjs " $func_extract_archives_result" fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then cmds=$old_archive_from_new_cmds else # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_extract_archives $gentop $dlprefiles func_append oldobjs " $func_extract_archives_result" fi # POSIX demands no paths to be encoded in archives. We have # to avoid creating archives with duplicate basenames if we # might have to extract them afterwards, e.g., when creating a # static archive out of a convenience library, or when linking # the entirety of a libtool archive into another (currently # not supported by libtool). if (for obj in $oldobjs do func_basename "$obj" $ECHO "$func_basename_result" done | sort | sort -uc >/dev/null 2>&1); then : else echo "copying selected object files to avoid basename conflicts..." gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_mkdir_p "$gentop" save_oldobjs=$oldobjs oldobjs= counter=1 for obj in $save_oldobjs do func_basename "$obj" objbase=$func_basename_result case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) while :; do # Make sure we don't pick an alternate name that also # overlaps. newobj=lt$counter-$objbase func_arith $counter + 1 counter=$func_arith_result case " $oldobjs " in *[\ /]"$newobj "*) ;; *) if test ! -f "$gentop/$newobj"; then break; fi ;; esac done func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" func_append oldobjs " $gentop/$newobj" ;; *) func_append oldobjs " $obj" ;; esac done fi func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 tool_oldlib=$func_to_tool_file_result eval cmds=\"$old_archive_cmds\" func_len " $cmds" len=$func_len_result if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds elif test -n "$archiver_list_spec"; then func_verbose "using command file archive linking..." for obj in $oldobjs do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" done > $output_objdir/$libname.libcmd func_to_tool_file "$output_objdir/$libname.libcmd" oldobjs=" $archiver_list_spec$func_to_tool_file_result" cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts func_verbose "using piecewise archive linking..." save_RANLIB=$RANLIB RANLIB=: objlist= concat_cmds= save_oldobjs=$oldobjs oldobjs= # Is there a better way of finding the last object in the list? for obj in $save_oldobjs do last_oldobj=$obj done eval test_cmds=\"$old_archive_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 for obj in $save_oldobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result func_append objlist " $obj" if test "$len" -lt "$max_cmd_len"; then : else # the above command should be used before it gets too long oldobjs=$objlist if test "$obj" = "$last_oldobj"; then RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\$concat_cmds$old_archive_cmds\" objlist= len=$len0 fi done RANLIB=$save_RANLIB oldobjs=$objlist if test -z "$oldobjs"; then eval cmds=\"\$concat_cmds\" else eval cmds=\"\$concat_cmds~\$old_archive_cmds\" fi fi fi func_execute_cmds "$cmds" 'exit $?' done test -n "$generated" && \ func_show_eval "${RM}r$generated" # Now create the libtool archive. case $output in *.la) old_library= test yes = "$build_old_libs" && old_library=$libname.$libext func_verbose "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` if test yes = "$hardcode_automatic"; then relink_command= fi # Only create the output if not a dry run. $opt_dry_run || { for installed in no yes; do if test yes = "$installed"; then if test -z "$install_libdir"; then break fi output=$output_objdir/${outputname}i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) func_basename "$deplib" name=$func_basename_result func_resolve_sysroot "$deplib" eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` test -z "$libdir" && \ func_fatal_error "'$deplib' is not a valid libtool archive" func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" ;; -L*) func_stripname -L '' "$deplib" func_replace_sysroot "$func_stripname_result" func_append newdependency_libs " -L$func_replace_sysroot_result" ;; -R*) func_stripname -R '' "$deplib" func_replace_sysroot "$func_stripname_result" func_append newdependency_libs " -R$func_replace_sysroot_result" ;; *) func_append newdependency_libs " $deplib" ;; esac done dependency_libs=$newdependency_libs newdlfiles= for lib in $dlfiles; do case $lib in *.la) func_basename "$lib" name=$func_basename_result eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "'$lib' is not a valid libtool archive" func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" ;; *) func_append newdlfiles " $lib" ;; esac done dlfiles=$newdlfiles newdlprefiles= for lib in $dlprefiles; do case $lib in *.la) # Only pass preopened files to the pseudo-archive (for # eventual linking with the app. that links it) if we # didn't already link the preopened objects directly into # the library: func_basename "$lib" name=$func_basename_result eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "'$lib' is not a valid libtool archive" func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" ;; esac done dlprefiles=$newdlprefiles else newdlfiles= for lib in $dlfiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlfiles " $abs" done dlfiles=$newdlfiles newdlprefiles= for lib in $dlprefiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlprefiles " $abs" done dlprefiles=$newdlprefiles fi $RM $output # place dlname in correct position for cygwin # In fact, it would be nice if we could use this code for all target # systems that can't hard-code library paths into their executables # and that have no shared library path variable independent of PATH, # but it turns out we can't easily determine that from inspecting # libtool variables, so we have to hard-code the OSs to which it # applies here; at the moment, that means platforms that use the PE # object format with DLL files. See the long comment at the top of # tests/bindir.at for full details. tdlname=$dlname case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) # If a -bindir argument was supplied, place the dll there. if test -n "$bindir"; then func_relative_path "$install_libdir" "$bindir" tdlname=$func_relative_path_result/$dlname else # Otherwise fall back on heuristic. tdlname=../bin/$dlname fi ;; esac $ECHO > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM (GNU $PACKAGE) $VERSION # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='$tdlname' # Names of this library. library_names='$library_names' # The name of the static archive. old_library='$old_library' # Linker flags that cannot go in dependency_libs. inherited_linker_flags='$new_inherited_linker_flags' # Libraries that this one depends upon. dependency_libs='$dependency_libs' # Names of additional weak libraries provided by this library weak_library_names='$weak_libs' # Version information for $libname. current=$current age=$age revision=$revision # Is this an already installed library? installed=$installed # Should we warn about portability when linking against -modules? shouldnotlink=$module # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test no,yes = "$installed,$need_relink"; then $ECHO >> $output "\ relink_command=\"$relink_command\"" fi done } # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' ;; esac exit $EXIT_SUCCESS } if test link = "$opt_mode" || test relink = "$opt_mode"; then func_mode_link ${1+"$@"} fi # func_mode_uninstall arg... func_mode_uninstall () { $debug_cmd RM=$nonopt files= rmforce=false exit_status=0 # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic=$magic for arg do case $arg in -f) func_append RM " $arg"; rmforce=: ;; -*) func_append RM " $arg" ;; *) func_append files " $arg" ;; esac done test -z "$RM" && \ func_fatal_help "you must specify an RM program" rmdirs= for file in $files; do func_dirname "$file" "" "." dir=$func_dirname_result if test . = "$dir"; then odir=$objdir else odir=$dir/$objdir fi func_basename "$file" name=$func_basename_result test uninstall = "$opt_mode" && odir=$dir # Remember odir for removal later, being careful to avoid duplicates if test clean = "$opt_mode"; then case " $rmdirs " in *" $odir "*) ;; *) func_append rmdirs " $odir" ;; esac fi # Don't error if the file doesn't exist and rm -f was used. if { test -L "$file"; } >/dev/null 2>&1 || { test -h "$file"; } >/dev/null 2>&1 || test -f "$file"; then : elif test -d "$file"; then exit_status=1 continue elif $rmforce; then continue fi rmfiles=$file case $name in *.la) # Possibly a libtool archive, so verify it. if func_lalib_p "$file"; then func_source $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do func_append rmfiles " $odir/$n" done test -n "$old_library" && func_append rmfiles " $odir/$old_library" case $opt_mode in clean) case " $library_names " in *" $dlname "*) ;; *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; esac test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" ;; uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1' fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1' fi # FIXME: should reinstall the best remaining shared library. ;; esac fi ;; *.lo) # Possibly a libtool object, so verify it. if func_lalib_p "$file"; then # Read the .lo file func_source $dir/$name # Add PIC object to the list of files to remove. if test -n "$pic_object" && test none != "$pic_object"; then func_append rmfiles " $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. if test -n "$non_pic_object" && test none != "$non_pic_object"; then func_append rmfiles " $dir/$non_pic_object" fi fi ;; *) if test clean = "$opt_mode"; then noexename=$name case $file in *.exe) func_stripname '' '.exe' "$file" file=$func_stripname_result func_stripname '' '.exe' "$name" noexename=$func_stripname_result # $file with .exe has already been added to rmfiles, # add $file without .exe func_append rmfiles " $file" ;; esac # Do a test to see if this is a libtool program. if func_ltwrapper_p "$file"; then if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" relink_command= func_source $func_ltwrapper_scriptname_result func_append rmfiles " $func_ltwrapper_scriptname_result" else relink_command= func_source $dir/$noexename fi # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles func_append rmfiles " $odir/$name $odir/${name}S.$objext" if test yes = "$fast_install" && test -n "$relink_command"; then func_append rmfiles " $odir/lt-$name" fi if test "X$noexename" != "X$name"; then func_append rmfiles " $odir/lt-$noexename.c" fi fi fi ;; esac func_show_eval "$RM $rmfiles" 'exit_status=1' done # Try to remove the $objdir's in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then func_show_eval "rmdir $dir >/dev/null 2>&1" fi done exit $exit_status } if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then func_mode_uninstall ${1+"$@"} fi test -z "$opt_mode" && { help=$generic_help func_fatal_help "you must specify a MODE" } test -z "$exec_cmd" && \ func_fatal_help "invalid operation mode '$opt_mode'" if test -n "$exec_cmd"; then eval exec "$exec_cmd" exit $EXIT_FAILURE fi exit $exit_status # The TAGs below are defined such that we never get into a situation # where we disable both kinds of libraries. Given conflicting # choices, we go for a static library, that is the most portable, # since we can't tell whether shared libraries were disabled because # the user asked for that or because the platform doesn't support # them. This is particularly important on AIX, because we don't # support having both static and shared libraries enabled at the same # time on that platform, so we default to a shared-only configuration. # If a disable-shared tag is given, we'll fallback to a static-only # configuration. But we'll never go from static-only to shared-only. # ### BEGIN LIBTOOL TAG CONFIG: disable-shared build_libtool_libs=no build_old_libs=yes # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: libgeotiff-1.7.4/geo_write.c0000664000175000017500000001406314622755317012730 00000000000000/********************************************************************** * * geo_write.c -- Public routines for GEOTIFF GeoKey access. * * Written By: Niles D. Ritter. * * copyright (c) 1995 Niles D. Ritter * * Permission granted to use this software, so long as this copyright * notice accompanies any source code derived therefrom. * **********************************************************************/ #include "geotiffio.h" /* public interface */ #include "geo_tiffp.h" /* external TIFF interface */ #include "geo_keyp.h" /* private interface */ static int WriteKey(GTIF* gt, TempKeyData* tempData, KeyEntry* entptr, GeoKey* keyptr); static int SortKeys(GTIF* gt,int *sortkeys); /** This function flushes all the GeoTIFF keys that have been set with the GTIFKeySet() function into the associated TIFF file. @param gt The GeoTIFF handle returned by GTIFNew. GTIFWriteKeys() should be called before GTIFFree() is used to deallocate a GeoTIFF access handle. */ int GTIFWriteKeys(GTIF *gt) { if (!(gt->gt_flags & FLAG_FILE_MODIFIED)) return 1; if( gt->gt_tif == NULL ) return 0; TempKeyData tempData; tempData.tk_asciiParams = 0; tempData.tk_asciiParamsLength = 0; tempData.tk_asciiParamsOffset = 0; /* Sort the Keys into numerical order */ int sortkeys[MAX_KEYS]; if (!SortKeys(gt,sortkeys)) { /* XXX error: a key was not recognized */ } /* Set up header of ProjectionInfo tag */ KeyHeader *header = (KeyHeader *)gt->gt_short; header->hdr_num_keys = (pinfo_t) gt->gt_num_keys; header->hdr_version = gt->gt_version; header->hdr_rev_major = gt->gt_rev_major; header->hdr_rev_minor = gt->gt_rev_minor; /* Sum up the ASCII tag lengths */ for (int i = 0; i < gt->gt_num_keys; i++) { GeoKey *keyptr = gt->gt_keys + sortkeys[i]; if (keyptr->gk_type == TYPE_ASCII) { tempData.tk_asciiParamsLength += keyptr->gk_count; } } if (tempData.tk_asciiParamsLength > 0) { tempData.tk_asciiParams = (char *)_GTIFcalloc(tempData.tk_asciiParamsLength + 1); if( tempData.tk_asciiParams == NULL ) return 0; tempData.tk_asciiParams[tempData.tk_asciiParamsLength] = '\0'; } /* Set up the rest of SHORT array properly */ GeoKey *keyptr = gt->gt_keys; KeyEntry *entptr = (KeyEntry*)(gt->gt_short + 4); for (int i=0; i< gt->gt_num_keys; i++,entptr++) { if (!WriteKey(gt,&tempData,entptr,keyptr+sortkeys[i])) { if (tempData.tk_asciiParamsLength > 0) { _GTIFFree (tempData.tk_asciiParams); } return 0; } } /* Write out the Key Directory */ (gt->gt_methods.set)(gt->gt_tif, GTIFF_GEOKEYDIRECTORY, gt->gt_nshorts, gt->gt_short ); /* Write out the params directories */ if (gt->gt_ndoubles) (gt->gt_methods.set)(gt->gt_tif, GTIFF_DOUBLEPARAMS, gt->gt_ndoubles, gt->gt_double ); if (tempData.tk_asciiParamsLength > 0) { /* just to be safe */ tempData.tk_asciiParams[tempData.tk_asciiParamsLength] = '\0'; (gt->gt_methods.set)(gt->gt_tif, GTIFF_ASCIIPARAMS, 0, tempData.tk_asciiParams); } gt->gt_flags &= ~FLAG_FILE_MODIFIED; if (tempData.tk_asciiParamsLength > 0) { _GTIFFree (tempData.tk_asciiParams); } return 1; } /********************************************************************** * * Private Routines * **********************************************************************/ /* * Given GeoKey, write out the KeyEntry entries, returning 0 if failure. * This is the exact complement of ReadKey(). */ static int WriteKey(GTIF* gt, TempKeyData* tempData, KeyEntry* entptr, GeoKey* keyptr) { entptr->ent_key = (pinfo_t) keyptr->gk_key; entptr->ent_count = (pinfo_t) keyptr->gk_count; const int count = entptr->ent_count; if (count==1 && keyptr->gk_type==TYPE_SHORT) { entptr->ent_location = GTIFF_LOCAL; memcpy(&(entptr->ent_val_offset), &keyptr->gk_data, sizeof(pinfo_t)); return 1; } switch (keyptr->gk_type) { case TYPE_SHORT: entptr->ent_location = GTIFF_GEOKEYDIRECTORY; entptr->ent_val_offset = (pinfo_t) ((pinfo_t*)keyptr->gk_data - gt->gt_short); break; case TYPE_DOUBLE: entptr->ent_location = GTIFF_DOUBLEPARAMS; entptr->ent_val_offset = (pinfo_t) ((double*)keyptr->gk_data - gt->gt_double); break; case TYPE_ASCII: if( tempData->tk_asciiParams == NULL ) return 0; entptr->ent_location = GTIFF_ASCIIPARAMS; entptr->ent_val_offset = (pinfo_t) tempData->tk_asciiParamsOffset; _GTIFmemcpy (tempData->tk_asciiParams + tempData->tk_asciiParamsOffset , keyptr->gk_data, keyptr->gk_count); tempData->tk_asciiParams[tempData->tk_asciiParamsOffset+keyptr->gk_count-1] = '|'; tempData->tk_asciiParamsOffset += keyptr->gk_count; break; default: return 0; /* failure */ } return 1; /* success */ } /* * Numerically sort the GeoKeys. * We just do a linear search through * the list and pull out the keys that were set. */ static int SortKeys(GTIF* gt,int *sortkeys) { /* A bit convoluted to make Clang Static Analyzer happy */ if( gt->gt_num_keys <= 0 ) return 1; sortkeys[0] = 1; for( int i = 1; i < gt->gt_num_keys; i++ ) sortkeys[i] = i+1; int did_work; do { /* simple bubble sort */ did_work = 0; for( int i = 0; i < gt->gt_num_keys-1; i++ ) { if( gt->gt_keys[sortkeys[i]].gk_key > gt->gt_keys[sortkeys[i+1]].gk_key ) { /* swap keys in sort list */ int j = sortkeys[i]; sortkeys[i] = sortkeys[i+1]; sortkeys[i+1] = j; did_work = 1; } } } while( did_work ); return 1; } libgeotiff-1.7.4/geokeys_v1_1.inc0000664000175000017500000000565514020740032013552 00000000000000/* GeoTIFF GeoKey Database for OGC GeoTIFF v1.1 */ /* C database for Geotiff include files. */ /* the macro ValuePair() must be defined */ /* by the enclosing include file */ /* GeoTIFF Configuration Keys */ #ifndef ONLY_GEOTIFF_V1_1_CHANGES ValuePair( GTModelTypeGeoKey, 1024) ValuePair( GTRasterTypeGeoKey, 1025) ValuePair( GTCitationGeoKey, 1026) #endif /* Geodetic CRS Parameter Keys */ ValuePair( GeodeticCRSGeoKey, 2048) ValuePair( GeodeticCitationGeoKey, 2049) ValuePair( GeodeticDatumGeoKey, 2050) ValuePair( PrimeMeridianGeoKey, 2051) #ifndef ONLY_GEOTIFF_V1_1_CHANGES ValuePair( GeogLinearUnitsGeoKey, 2052) ValuePair( GeogLinearUnitSizeGeoKey, 2053) ValuePair( GeogAngularUnitsGeoKey, 2054) ValuePair( GeogAngularUnitSizeGeoKey, 2055) #endif ValuePair( EllipsoidGeoKey, 2056) ValuePair( EllipsoidSemiMajorAxisGeoKey, 2057) ValuePair( EllipsoidSemiMinorAxisGeoKey, 2058) ValuePair( EllipsoidInvFlatteningGeoKey, 2059) #ifndef ONLY_GEOTIFF_V1_1_CHANGES ValuePair( GeogAzimuthUnitsGeoKey, 2060) #endif ValuePair( PrimeMeridianLongitudeGeoKey, 2061) #ifndef ONLY_GEOTIFF_V1_1_CHANGES ValuePair( GeogTOWGS84GeoKey, 2062) /* 2011 - proposed addition */ #endif /* Projected CRS Parameter Keys */ ValuePair( ProjectedCRSGeoKey, 3072) ValuePair( ProjectedCitationGeoKey, 3073) #ifndef ONLY_GEOTIFF_V1_1_CHANGES ValuePair( ProjectionGeoKey, 3074) #endif ValuePair( ProjMethodGeoKey, 3075) #ifndef ONLY_GEOTIFF_V1_1_CHANGES ValuePair( ProjLinearUnitsGeoKey, 3076) ValuePair( ProjLinearUnitSizeGeoKey, 3077) ValuePair( ProjStdParallel1GeoKey, 3078) ValuePair( ProjStdParallelGeoKey,ProjStdParallel1GeoKey) /* ** alias ** */ ValuePair( ProjStdParallel2GeoKey, 3079) ValuePair( ProjNatOriginLongGeoKey, 3080) ValuePair( ProjOriginLongGeoKey,ProjNatOriginLongGeoKey) /* ** alias ** */ ValuePair( ProjNatOriginLatGeoKey, 3081) ValuePair( ProjOriginLatGeoKey,ProjNatOriginLatGeoKey) /* ** alias ** */ ValuePair( ProjFalseEastingGeoKey, 3082) ValuePair( ProjFalseNorthingGeoKey, 3083) ValuePair( ProjFalseOriginLongGeoKey, 3084) ValuePair( ProjFalseOriginLatGeoKey, 3085) ValuePair( ProjFalseOriginEastingGeoKey, 3086) ValuePair( ProjFalseOriginNorthingGeoKey, 3087) ValuePair( ProjCenterLongGeoKey, 3088) ValuePair( ProjCenterLatGeoKey, 3089) ValuePair( ProjCenterEastingGeoKey, 3090) ValuePair( ProjCenterNorthingGeoKey, 3091) ValuePair( ProjScaleAtNatOriginGeoKey, 3092) ValuePair( ProjScaleAtOriginGeoKey,ProjScaleAtNatOriginGeoKey) /* ** alias ** */ ValuePair( ProjScaleAtCenterGeoKey, 3093) ValuePair( ProjAzimuthAngleGeoKey, 3094) ValuePair( ProjStraightVertPoleLongGeoKey, 3095) ValuePair( ProjRectifiedGridAngleGeoKey, 3096) #endif /* Vertical CRS Parameter Keys */ ValuePair( VerticalGeoKey, 4096) #ifndef ONLY_GEOTIFF_V1_1_CHANGES ValuePair( VerticalCitationGeoKey, 4097) ValuePair( VerticalDatumGeoKey, 4098) ValuePair( VerticalUnitsGeoKey, 4099) #endif /* End of Data base */ libgeotiff-1.7.4/geo_config.h.in0000664000175000017500000000030614755113345013444 00000000000000#ifndef GEO_CONFIG_H #define GEO_CONFIG_H /* Define if you have the header file. */ #undef GEOTIFF_HAVE_STRINGS_H #undef GEO_NORMALIZE_DISABLE_TOWGS84 #endif /* ndef GEO_CONFIG_H */ libgeotiff-1.7.4/configure.ac0000664000175000017500000003161414755112526013063 00000000000000 m4_include([m4/ax_prog_doxygen.m4]) AC_PREREQ([2.59]) AC_INIT([libgeotiff], [1.7.4], [warmerdam@pobox.com]) AC_CANONICAL_BUILD AC_CONFIG_MACRO_DIR([m4]) LIBGEOTIFF_MAJOR_VERSION=1 LIBGEOTIFF_MINOR_VERSION=7 LIBGEOTIFF_PATCH_VERSION=4 LIBGEOTIFF_REV_VERSION=0 LIBGEOTIFF_STRING_VERSION=${LIBGEOTIFF_MAJOR_VERSION}.${LIBGEOTIFF_MINOR_VERSION}.${LIBGEOTIFF_PATCH_VERSION} LIBGEOTIFF_VERSION="${LIBGEOTIFF_MAJOR_VERSION}${LIBGEOTIFF_MINOR_VERSION}${LIBGEOTIFF_PATCH_VERSION}${LIBGEOTIFF_REV_VERSION}" AC_SUBST(LIBGEOTIFF_MAJOR_VERSION) AC_SUBST(LIBGEOTIFF_MINOR_VERSION) AC_SUBST(LIBGEOTIFF_PATCH_VERSION) AC_SUBST(LIBGEOTIFF_REV_VERSION) AC_SUBST(LIBGEOTIFF_STRING_VERSION) AC_SUBST(LIBGEOTIFF_VERSION) AC_CONFIG_HEADERS([geo_config.h]) AC_CONFIG_FILES([geotiff.h]) dnl ######################################################################### dnl Checks for programs. dnl ######################################################################### AM_INIT_AUTOMAKE AM_MAINTAINER_MODE AC_PROG_CC AC_PROG_INSTALL AC_PROG_LN_S AC_PROG_MAKE_SET AC_PROG_LIBTOOL dnl ######################################################################### dnl Default compilation flags dnl ######################################################################### m4_define([debug_default],[no]) CFLAGS="$CFLAGS" dnl We want to honor the users wishes with regard to linking. LIBS="$LDFLAGS $LIBS" dnl ######################################################################### dnl Checks for header files. dnl ######################################################################### dnl AC_CHECK_HEADERS([string.h],[HAVE_STRING_H=1], [AC_MSG_ERROR([cannot find string.h, bailing out])]) AC_CHECK_HEADERS([strings.h],[GEOTIFF_HAVE_STRINGS_H=1]) AC_DEFINE_UNQUOTED(GEOTIFF_HAVE_STRINGS_H, 1, [Define if you have the header file.]) AC_CHECK_HEADERS([stdio.h],, [AC_MSG_ERROR([cannot find stdio.h, bailing out])]) AC_CHECK_HEADERS([stdlib.h],, [AC_MSG_ERROR([cannot find stdlib.h, bailing out])]) AC_CHECK_HEADERS([locale.h]) LIBS="${LIBS}" dnl ######################################################################### dnl Definiion of custom Autoconf macros dnl ######################################################################### AC_DEFUN([LOC_MSG],[ echo "$1" ]) dnl ######################################################################### dnl Build mode configuration (debug/optimized) dnl ######################################################################### AC_ARG_ENABLE([debug], AC_HELP_STRING([--enable-debug=ARG], [Enable debug compilation mode @<:@yes|no@:>@, default=debug_default]),,) AC_MSG_CHECKING([for debug enabled]) if test "x$enable_debug" = "xyes"; then CFLAGS="$CFLAGS -g -DDEBUG -Wall" AC_MSG_RESULT(yes) else CFLAGS="$CFLAGS -O3 -DNDEBUG" AC_MSG_RESULT(no) fi dnl Checks for libraries. AC_CHECK_LIB(m,exp,,,) dnl ######################################################################### dnl Add option to include libz in library list for use of libtiff. dnl ######################################################################### AC_ARG_WITH([zip], AC_HELP_STRING([--with-zip=ARG], [zlib library to use (yes or path)]),,) AC_ARG_WITH([zlib], AC_HELP_STRING([--with-zlib=ARG], [ alias for --with-zip]),,) AC_ARG_WITH([libz], AC_HELP_STRING([--with-libz=ARG], [ alias for --with-zip]),,) HAVE_ZIP="no" ZIP_CONFIG="no" # Implement aliasing... if test "$with_zlib" != "" ; then with_zip=$with_zlib fi if test "$with_libz" != "" ; then with_zip=$with_libz fi if test "$with_zip" != "" -a "x$with_zip" != "xno" ; then AC_CHECK_HEADERS([zlib.h],, [AC_MSG_ERROR([cannot find zlib.h, bailing out])]) AC_SEARCH_LIBS([inflateInit_], [z], [ZIP_CONFIG=yes], [ZIP_CONFIG=no], [-L$with_zip/lib -lm]) else AC_MSG_CHECKING([for zlib]) AC_MSG_RESULT([no]) fi if test "${ZIP_CONFIG}" != "no" ; then if test "${ZIP_CONFIG}" = "yes" ; then if test -d ${with_zip}/include ; then ZIP_INC="-I$with_zip/include" AC_MSG_RESULT([using zlib from $with_zip/include]) HAVE_ZLIB="yes" ZIP_CONFIG="yes" LIBS="-L${with_zip}/lib -lz $LIBS" fi fi fi AC_SUBST([ZIP_INC]) AC_SUBST([ZIP_PREFIX]) AM_CONDITIONAL([ZIP_IS_CONFIG], [test ! x$ZIP_CONFIG = xno]) dnl ######################################################################### dnl Add option to include libjpeg in library list for use of libtiff. dnl ######################################################################### AC_ARG_WITH([jpeg], AC_HELP_STRING([--with-jpeg=ARG], [jpeg library to use (yes or path)]),,) HAVE_JPEG="no" JPEG_CONFIG="no" if test "$with_jpeg" = "no" -o "$with_jpeg" = "" ; then AC_MSG_CHECKING([for jpeg]) AC_MSG_RESULT([no]) else AC_SEARCH_LIBS([jinit_compress_master], [jpeg], [JPEG_CONFIG=yes], [JPEG_CONFIG=no], [-L$with_jpeg/lib -lm]) fi if test "${JPEG_CONFIG}" != "no" ; then if test "${JPEG_CONFIG}" = "yes" ; then if test -d ${with_jpeg}/include ; then JPEG_INC="-I$with_jpeg/include" LIBS="-L$with_jpeg/lib $LIBS" AC_MSG_RESULT([using jpeg from $with_jpeg/include]) fi fi HAVE_JPEG="yes" JPEG_CONFIG="yes" fi AC_SUBST([JPEG_INC]) AC_SUBST([JPEG_PREFIX]) AM_CONDITIONAL([JPEG_IS_CONFIG], [test ! x$JPEG_CONFIG = xno]) dnl ######################################################################### dnl Special logic to try and find a user specified libtiff tree. If not dnl available check if the system directories have the library, _and_ the dnl required private include files. Normally these private include files dnl (tiffiop.h) are not installed with the public interface. dnl ######################################################################### TIFF_CONFIG="no" AC_ARG_WITH(libtiff, [ --with-libtiff=dir Use libtiff in directory dir],,) if test "$with_libtiff" != "" ; then if test -f $with_libtiff/include/tiffio.h -a -d $with_libtiff/lib ; then LIBS="-L$with_libtiff/lib -ltiff $LIBS" TIFF_INC=-I$with_libtiff/include else LIBS="-L$with_libtiff -ltiff $LIBS" TIFF_INC=-I$with_libtiff fi LIBS_SAVED="$LIBS" AC_CHECK_LIB(tiff,TIFFOpen,[TIFF_CONFIG=yes], AC_MSG_ERROR([failed to link with -ltiff to find TIFFOpen]),-lm) AC_CHECK_LIB(tiff,TIFFMergeFieldInfo,[TIFF_CONFIG=yes], AC_MSG_ERROR([Libtiff 3.6.0 Beta or later required for this version of libgeotiff. Please upgrade or use an older version of libgeotiff.]),-lm) LIBS="$LIBS_SAVED" else PKG_CHECK_MODULES(LIBTIFF, libtiff-4, [TIFF_INC="$LIBTIFF_CFLAGS" LIBS="$LIBS $LIBTIFF_LIBS" TIFF_CONFIG="yes"], [AC_CHECK_LIB(tiff,TIFFOpen,[TIFF_CONFIG=yes], AC_MSG_ERROR([You will need to substantially rewrite libxtiff to build libgeotiff without libtiff]),-lm) LIBS_SAVED="$LIBS" AC_CHECK_LIB(tiff,TIFFMergeFieldInfo,[TIFF_CONFIG=yes], AC_MSG_ERROR([Libtiff 3.6.0 Beta or later required for this version of libgeotiff. Please upgrade libtiff or use an older version of libgeotiff.]),-lm) LIBS="$LIBS -ltiff" TIFF_INC= TIFF_CONFIG="yes"]) fi AC_SUBST([TIFF_INC]) AC_SUBST([TIFF_PREFIX]) AM_CONDITIONAL([TIFF_IS_CONFIG], [test ! x$TIFF_CONFIG = xno]) dnl --------------------------------------------------------------------------- dnl PROJ.6 related stuff dnl --------------------------------------------------------------------------- AC_MSG_CHECKING([for PROJ >= 6 library]) AC_ARG_WITH(proj,[ --with-proj=ARG Compile with PROJ.x (ARG=yes or path)],,) PROJ_INCLUDE="" if test "x$with_proj" = "xno" ; then AC_MSG_ERROR([PROJ 6 is a required dependency.]) else if test "x$with_proj" = "xyes" -o "x$with_proj" = "x"; then PKG_CHECK_MODULES(PROJ, proj, [LIBS="$LIBS $PROJ_LIBS" PROJ_FOUND=yes], [PROJ_FOUND=no]) if test "$PROJ_FOUND" = "no"; then ORIG_LIBS="$LIBS" LIBS="-lproj $ORIG_LIBS" AC_CHECK_LIB(proj,proj_create_from_wkt,PROJ_FOUND=yes,PROJ_FOUND=no,) fi if test "$PROJ_FOUND" = "no"; then AC_CHECK_LIB(proj,internal_proj_create_from_wkt,PROJ_FOUND=yes,PROJ_FOUND=no,) if test "$PROJ_FOUND" = "yes"; then PROJ_INCLUDE="-DPROJ_RENAME_SYMBOLS" fi fi if test "$PROJ_FOUND" = "no"; then LIBS="-linternalproj $ORIG_LIBS" AC_CHECK_LIB(internalproj,internal_proj_create_from_wkt,PROJ_FOUND=yes,PROJ_FOUND=no,) if test "$PROJ_FOUND" = "yes"; then PROJ_INCLUDE="-DPROJ_RENAME_SYMBOLS" fi fi if test "$PROJ_FOUND" = "no"; then AC_MSG_ERROR([PROJ 6 symbols not found]) fi AC_CHECK_HEADERS([proj.h]) if test "$ac_cv_header_proj_h" = "yes" ; then AC_MSG_NOTICE([proj.h found]) else AC_MSG_ERROR([proj.h not found]) fi else ORIG_LIBS="$LIBS" LIBS="-L$with_proj/lib -lproj $ORIG_LIBS" AC_CHECK_LIB(proj,proj_create_from_wkt,PROJ_FOUND=yes,PROJ_FOUND=no,) if test "$PROJ_FOUND" = "no"; then LIBS="-L$with_proj/lib -lproj -lsqlite3 $ORIG_LIBS" unset ac_cv_lib_proj_proj_create_from_wkt AC_CHECK_LIB(proj,proj_create_from_wkt,PROJ_FOUND=yes,PROJ_FOUND=no,) fi if test "$PROJ_FOUND" = "no"; then LIBS="-L$with_proj/lib -lproj $ORIG_LIBS" AC_CHECK_LIB(proj,internal_proj_create_from_wkt,PROJ_FOUND=yes,PROJ_FOUND=no,) if test "$PROJ_FOUND" = "no"; then LIBS="-L$with_proj/lib -lproj -lsqlite3 $ORIG_LIBS" unset ac_cv_lib_proj_internal_proj_create_from_wkt AC_CHECK_LIB(proj,internal_proj_create_from_wkt,PROJ_FOUND=yes,PROJ_FOUND=no,) fi if test "$PROJ_FOUND" = "yes"; then PROJ_INCLUDE="-DPROJ_RENAME_SYMBOLS" fi fi if test "$PROJ_FOUND" = "no"; then LIBS="-L$with_proj/lib -linternalproj $ORIG_LIBS" AC_CHECK_LIB(internalproj,internal_proj_create_from_wkt,PROJ_FOUND=yes,PROJ_FOUND=no,) if test "$PROJ_FOUND" = "no"; then LIBS="-L$with_proj/lib -linternalproj -lsqlite3 $ORIG_LIBS" unset ac_cv_lib_internal_proj_internal_proj_create_from_wkt AC_CHECK_LIB(internalproj,internal_proj_create_from_wkt,PROJ_FOUND=yes,PROJ_FOUND=no,) fi if test "$PROJ_FOUND" = "yes"; then PROJ_INCLUDE="-DPROJ_RENAME_SYMBOLS" fi fi if test "$PROJ_FOUND" = "no"; then AC_MSG_ERROR([PROJ 6 symbols not found]) fi if test -r "$with_proj/include/proj.h" ; then PROJ_INCLUDE="$PROJ_INCLUDE -I$with_proj/include" AC_MSG_NOTICE([proj.h found]) else AC_MSG_ERROR([proj.h not found]) fi fi fi AC_SUBST(PROJ_INCLUDE) AC_ARG_ENABLE(towgs84, [ --disable-towgs84 Disable WGS84 parameters for binary compatibility with pre-1.4.1], AC_DEFINE([GEO_NORMALIZE_DISABLE_TOWGS84], [], [Disable WGS84 parameters])) AC_MSG_CHECKING([if libtool needs -no-undefined flag to build shared libraries]) case "${host}" in *-*-cygwin* | *-*-mingw*|*-*-aix*) ## Add in the -no-undefined flag to LDFLAGS for libtool. AC_MSG_RESULT([yes]) NOUNDEFINED=" -no-undefined" ;; *) ## Don't add in anything. AC_MSG_RESULT([no]) ;; esac AC_SUBST([NOUNDEFINED]) dnl ######################################################################### dnl Doxygen settings dnl ######################################################################### DX_HTML_FEATURE(ON) DX_CHM_FEATURE(OFF) DX_CHI_FEATURE(OFF) DX_MAN_FEATURE(ON) DX_RTF_FEATURE(OFF) DX_XML_FEATURE(OFF) DX_PDF_FEATURE(OFF) DX_PS_FEATURE(OFF) DX_INIT_DOXYGEN($PACKAGE_NAME, docs/Doxyfile, docs/output) dnl ######################################################################### dnl Generate makefiles dnl ######################################################################### AC_CONFIG_FILES([ Makefile libxtiff/Makefile bin/Makefile man/Makefile man/man1/Makefile cmake/Makefile test/Makefile libgeotiff.pc ]) AC_OUTPUT dnl ######################################################################### dnl Print configuration summary dnl ######################################################################### LOC_MSG() LOC_MSG([libgeotiff configuration summary:]) LOC_MSG() LOC_MSG([ Version..................: ${RELEASE_VERSION}]) LOC_MSG([ Installation directory...: ${prefix}]) LOC_MSG([ C compiler...............: ${CC} ${CFLAGS}]) LOC_MSG([ Debugging support........: ${enable_debug}]) LOC_MSG() LOC_MSG([ zlib support......: ${ZIP_CONFIG}]) LOC_MSG([ jpeg support......: ${JPEG_CONFIG}]) LOC_MSG([ TIFF support......: ${TIFF_CONFIG}]) LOC_MSG([ -INCLUDE .......: ${TIFF_INC}]) LOC_MSG([ -PREFIX ........: ${TIFF_PREFIX}]) LOC_MSG([ PROJ support......: yes]) LOC_MSG([ -INCLUDE .......: ${PROJ_INCLUDE}]) LOC_MSG([ LIBS.....................: ${LIBS}]) LOC_MSG() LOC_MSG([ libgeotiff - http://trac.osgeo.org/geotiff]) LOC_MSG() dnl EOF libgeotiff-1.7.4/CMakeLists.txt0000664000175000017500000003201514755112727013334 00000000000000############################################################################### # # CMake main configuration file to build GeoTIFF library and utilities. # # Author: Mateusz Loskot # ############################################################################### CMAKE_MINIMUM_REQUIRED(VERSION 3.13) PROJECT(GeoTIFF) include(GNUInstallDirs) SET(GEOTIFF_LIB_NAME geotiff) SET(GEOTIFF_LIBRARY_TARGET geotiff_library) ############################################################################## # CMake settings SET(CMAKE_COLOR_MAKEFILE ON) # Version information set(LIBGEOTIFF_MAJOR_VERSION 1) set(LIBGEOTIFF_MINOR_VERSION 7) set(LIBGEOTIFF_PATCH_VERSION 4) set(LIBGEOTIFF_REV_VERSION 0) # Set library version to match that of autoconf: # libgeotiff.so -> libgeotiff.so.5 # libgeotiff.so.5 -> libgeotiff.so.5.2.4 # libgeotiff.so.5.2.4 set(LINK_SOVERSION "5") set(LINK_VERSION "5.2.4") set(PROJECT_VERSION_MAJOR ${LIBGEOTIFF_MAJOR_VERSION}) set(PROJECT_VERSION_MINOR ${LIBGEOTIFF_MINOR_VERSION}) set(PROJECT_VERSION_PATCH ${LIBGEOTIFF_PATCH_VERSION}) set(PROJECT_VERSION "${PROJECT_VERSION_MAJOR}.${PROJECT_VERSION_MINOR}.${PROJECT_VERSION_PATCH}") set(LIBGEOTIFF_STRING_VERSION "${PROJECT_VERSION}") set(LIBGEOTIFF_VERSION "${LIBGEOTIFF_MAJOR_VERSION}${LIBGEOTIFF_MINOR_VERSION}${LIBGEOTIFF_PATCH_VERSION}${LIBGEOTIFF_REV_VERSION}") string (TOLOWER ${PROJECT_NAME} PROJECT_NAME_LOWER) string (TOUPPER ${PROJECT_NAME} PROJECT_NAME_UPPER) configure_file(geotiff.h.in ${CMAKE_CURRENT_BINARY_DIR}/geotiff.h @ONLY) # Allow advanced users to generate Makefiles printing detailed commands MARK_AS_ADVANCED(CMAKE_VERBOSE_MAKEFILE) # Path to additional CMake modules SET(CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/cmake ${CMAKE_MODULE_PATH}) ############################################################################### # General build settings option(BUILD_SHARED_LIBS "Set ON to build shared library" ON) option(BUILD_MAN "Set ON to build man pages" ON) option(BUILD_DOC "Set ON to build doc files" ON) IF(NOT CMAKE_BUILD_TYPE) SET(CMAKE_BUILD_TYPE Debug CACHE STRING "Choose the type of build, options are: None Debug Release RelWithDebInfo MinSizeRel" FORCE) ENDIF() SET(GEOTIFF_BUILD_PEDANTIC FALSE CACHE BOOL "Choose compilation in pedantic or relaxed mode") IF(CMAKE_BUILD_TYPE MATCHES Debug) SET(GEOTIFF_BUILD_PEDANTIC TRUE) ENDIF() # TODO: Still testing the output paths --mloskot SET(GEOTIFF_BUILD_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR}/bin) # Output directory in which to build RUNTIME target files. # SET(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${GEOTIFF_BUILD_OUTPUT_DIRECTORY}) SET(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR}/bin) # Output directory in which to build LIBRARY target files # SET(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${GEOTIFF_BUILD_OUTPUT_DIRECTORY}) SET(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR}/lib) # Output directory in which to build ARCHIVE target files. # SET(CMAKE_ARCHIVE_OUTPUT_DIRECTORY ${GEOTIFF_BUILD_OUTPUT_DIRECTORY}) SET(CMAKE_ARCHIVE_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR}/lib) # Check required standard headers INCLUDE(CheckIncludeFiles) CHECK_INCLUDE_FILES(strings.h GEOTIFF_HAVE_STRINGS_H) ############################################################################### # User-defined build settings option(WITH_UTILITIES "Choose if GeoTIFF utilities should be built" ON) if (MSVC) SET(INTERFACE_LIB_PREFIX _i CACHE STRING "Windows interface library suffix") endif (MSVC) ############################################################################### # Search for dependencies # TIFF support - required, default=ON option(WITH_TIFF "Choose if TIFF support should be built" ON) FIND_PACKAGE(PROJ NO_MODULE QUIET) if (NOT PROJ_FOUND) FIND_PACKAGE(PROJ REQUIRED) endif () # Zlib support - optional, default=OFF option(WITH_ZLIB "Choose if zlib support should be built" OFF) # JPEG support - optional, default=OFF option(WITH_JPEG "Choose if JPEG support should be built" OFF) # Turn off TOWGS84 support option(WITH_TOWGS84 "Build with TOWGS84 support" ON) IF (NOT WITH_TOWGS84) SET(GEO_NORMALIZE_DISABLE_TOWGS84 1) endif() ############################################################################### # Generate geo_config.h with compile-time configuration MESSAGE(STATUS "Generating geo_config.h header") CONFIGURE_FILE (${CMAKE_CURRENT_SOURCE_DIR}/cmake/geo_config.h.in geo_config.h) INCLUDE_DIRECTORIES(BEFORE ${CMAKE_CURRENT_BINARY_DIR}) MESSAGE(STATUS "Generating geo_config.h header - done") ############################################################################### # Installation settings SET(GEOTIFF_LIB_HEADERS ${CMAKE_CURRENT_BINARY_DIR}/geotiff.h geotiffio.h geovalues.h geonames.h geokeys.h ${CMAKE_CURRENT_BINARY_DIR}/geo_config.h geo_tiffp.h geo_keyp.h geo_normalize.h cpl_serv.h geo_simpletags.h epsg_datum.inc epsg_gcs.inc epsg_pm.inc epsg_units.inc geo_ctrans.inc epsg_ellipse.inc epsg_pcs.inc epsg_proj.inc epsg_vertcs.inc geokeys.inc geokeys_v1_1.inc libxtiff/xtiffio.h) SET(GEOTIFF_MAN_PAGES man/man1/applygeo.1 man/man1/geotifcp.1 man/man1/listgeo.1) # Install doc files if(BUILD_DOC) INSTALL(FILES AUTHORS ChangeLog COPYING LICENSE README README_BIN README.WIN DESTINATION ${CMAKE_INSTALL_DOCDIR}) endif () # Install man pages if(BUILD_MAN) INSTALL(FILES ${GEOTIFF_MAN_PAGES} DESTINATION ${CMAKE_INSTALL_MANDIR}/man1) endif () # Install header files for development distribution INSTALL(FILES ${GEOTIFF_LIB_HEADERS} DESTINATION ${CMAKE_INSTALL_INCLUDEDIR}) ############################################################################### # Build libgeotiff library SET(GEOTIFF_LIB_SOURCES cpl_serv.c geo_extra.c geo_free.c geo_get.c geo_names.c geo_new.c geo_normalize.c geo_print.c geo_set.c geo_simpletags.c geo_tiffp.c geo_trans.c geo_write.c geotiff_proj4.c) SET(XTIFF_SOURCES libxtiff/xtiff.c) if (MSVC OR CMAKE_CONFIGURATION_TYPES) # For multi-config systems and for Visual Studio, the debug versions # of the libraries have a _d suffix. set (CMAKE_DEBUG_POSTFIX _d) endif () ADD_LIBRARY(${GEOTIFF_LIBRARY_TARGET} ${GEOTIFF_LIB_SOURCES} ${XTIFF_SOURCES}) set_property(TARGET ${GEOTIFF_LIBRARY_TARGET} PROPERTY CXX_STANDARD 98) set_property(TARGET ${GEOTIFF_LIBRARY_TARGET} PROPERTY C_STANDARD 99) set_property(TARGET ${GEOTIFF_LIBRARY_TARGET} PROPERTY POSITION_INDEPENDENT_CODE ON) set_property(TARGET ${GEOTIFF_LIBRARY_TARGET} PROPERTY OUTPUT_NAME ${GEOTIFF_LIB_NAME}) IF(WITH_JPEG) FIND_PACKAGE(JPEG NO_MODULE QUIET) if (NOT JPEG_FOUND) FIND_PACKAGE(JPEG) endif () IF(JPEG_FOUND) SET(HAVE_JPEG 1) TARGET_INCLUDE_DIRECTORIES(${GEOTIFF_LIBRARY_TARGET} PRIVATE ${JPEG_INCLUDE_DIR}) target_compile_definitions(${GEOTIFF_LIBRARY_TARGET} PRIVATE -DHAVE_JPEG=${HAVE_JPEG}) ENDIF() ENDIF() IF(WITH_TIFF) FIND_PACKAGE(TIFF NO_MODULE QUIET) if (NOT TIFF_FOUND) FIND_PACKAGE(TIFF REQUIRED) endif () IF(TIFF_FOUND) # Confirm required API is available INCLUDE(CheckFunctionExists) SET(CMAKE_REQUIRED_LIBRARIES ${TIFF_LIBRARIES}) CHECK_FUNCTION_EXISTS(TIFFOpen HAVE_TIFFOPEN) IF(NOT HAVE_TIFFOPEN) SET(TIFF_FOUND) # ReSET to NOT found for TIFF library MESSAGE(FATAL_ERROR "Failed to link with libtiff - TIFFOpen function not found") ENDIF() CHECK_FUNCTION_EXISTS(TIFFMergeFieldInfo HAVE_TIFFMERGEFIELDINFO) IF(NOT HAVE_TIFFMERGEFIELDINFO) SET(TIFF_FOUND) # ReSET to NOT found for TIFF library MESSAGE(FATAL_ERROR "Failed to link with libtiff - TIFFMergeFieldInfo function not found. libtiff 3.6.0 Beta or later required. Please upgrade or use an older version of libgeotiff") ENDIF() TARGET_INCLUDE_DIRECTORIES(${GEOTIFF_LIBRARY_TARGET} PRIVATE ${TIFF_INCLUDE_DIR}) TARGET_COMPILE_DEFINITIONS(${GEOTIFF_LIBRARY_TARGET} PRIVATE -DHAVE_TIFF=1) ENDIF(TIFF_FOUND) ENDIF(WITH_TIFF) IF(WITH_ZLIB) FIND_PACKAGE(ZLIB REQUIRED ) IF(ZLIB_FOUND) SET(HAVE_ZIP 1) TARGET_INCLUDE_DIRECTORIES(${GEOTIFF_LIBRARY_TARGET} PRIVATE ${ZLIB_INCLUDE_DIR}) TARGET_COMPILE_DEFINITIONS(${GEOTIFF_LIBRARY_TARGET} PRIVATE -DHAVE_ZIP=${HAVE_ZIP}) ENDIF() ENDIF() TARGET_INCLUDE_DIRECTORIES(${GEOTIFF_LIBRARY_TARGET} PUBLIC $ $ $) IF(WIN32 AND MSVC) SET_TARGET_PROPERTIES(${GEOTIFF_LIBRARY_TARGET} PROPERTIES IMPORT_SUFFIX "${INTERFACE_LIB_PREFIX}.lib") ENDIF(WIN32 AND MSVC) # Unix, linux: if(UNIX) SET_TARGET_PROPERTIES( ${GEOTIFF_LIBRARY_TARGET} PROPERTIES VERSION ${LINK_VERSION} SOVERSION ${LINK_SOVERSION} CLEAN_DIRECT_OUTPUT 1 ) if (APPLE) set_target_properties( ${GEOTIFF_LIBRARY_TARGET} PROPERTIES INSTALL_NAME_DIR "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}") endif() endif() ############################################################################### # Platform and compiler specific settings IF(WIN32) IF(BUILD_SHARED_LIBS) target_compile_definitions(${GEOTIFF_LIBRARY_TARGET} PRIVATE -DBUILD_AS_DLL=1) ENDIF() IF(MSVC) target_compile_definitions(${GEOTIFF_LIBRARY_TARGET} PRIVATE /DW4) if (NOT (MSVC_VERSION VERSION_LESS 1400)) target_compile_definitions(${GEOTIFF_LIBRARY_TARGET} PRIVATE -D_CRT_SECURE_NO_DEPRECATE) target_compile_definitions(${GEOTIFF_LIBRARY_TARGET} PRIVATE -D_CRT_SECURE_NO_WARNINGS) target_compile_definitions(${GEOTIFF_LIBRARY_TARGET} PRIVATE -D_CRT_NONSTDC_NO_WARNING) target_compile_definitions(${GEOTIFF_LIBRARY_TARGET} PRIVATE -D_SCL_SECURE_NO_WARNINGS) endif() ENDIF(MSVC) ENDIF() IF(CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX) target_compile_options(${GEOTIFF_LIBRARY_TARGET} PRIVATE -Wall -Wno-long-long ) IF(GEOTIFF_BUILD_PEDANTIC) target_compile_options(${GEOTIFF_LIBRARY_TARGET} PRIVATE -pedantic) ENDIF() ENDIF() set(CONFIG_PUBLIC_DEPENDENCIES "") set(CONFIG_PRIVATE_DEPENDENCIES "") if(TARGET TIFF::TIFF) set(TIFF_LIBRARIES TIFF::TIFF) string(APPEND CONFIG_PUBLIC_DEPENDENCIES "find_dependency(TIFF)\n") endif() target_link_libraries(${GEOTIFF_LIBRARY_TARGET} PUBLIC ${TIFF_LIBRARIES}) if(TARGET PROJ::proj) set(PROJ_LIBRARIES PROJ::proj) string(APPEND CONFIG_PRIVATE_DEPENDENCIES " find_dependency(PROJ)\n") endif() if(TARGET ZLIB::zlib) set(ZLIB_LIBRARIES ZLIB::zlib) string(APPEND CONFIG_PRIVATE_DEPENDENCIES " find_dependency(ZLIB)\n") endif() target_link_libraries(${GEOTIFF_LIBRARY_TARGET} PRIVATE ${PROJ_LIBRARIES} ${TIFF_LIBRARIES} ${ZLIB_LIBRARIES}) target_include_directories( ${GEOTIFF_LIBRARY_TARGET} PUBLIC $ $) INSTALL( TARGETS ${GEOTIFF_LIBRARY_TARGET} EXPORT depends RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR} LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR} PUBLIC_HEADER DESTINATION ${CMAKE_INSTALL_INCLUDEDIR} ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR} ) IF (MSVC) IF (BUILD_SHARED_LIBS) INSTALL(FILES $ DESTINATION ${CMAKE_INSTALL_BINDIR} OPTIONAL) ENDIF (BUILD_SHARED_LIBS) ENDIF (MSVC) # Install libgeotiff.pc set(prefix "${CMAKE_INSTALL_PREFIX}") set(exec_prefix "\${prefix}") if(IS_ABSOLUTE "${CMAKE_INSTALL_LIBDIR}") set(libdir "${CMAKE_INSTALL_LIBDIR}") else() set(libdir "\${exec_prefix}/${CMAKE_INSTALL_LIBDIR}") endif() if(IS_ABSOLUTE "${CMAKE_INSTALL_INCLUDEDIR}") set(includedir "${CMAKE_INSTALL_INCLUDEDIR}") else() set(includedir "\${prefix}/${CMAKE_INSTALL_INCLUDEDIR}") endif() SET(PACKAGE_NAME ${PROJECT_NAME}) SET(VERSION ${PROJECT_VERSION}) configure_file(libgeotiff.pc.in ${CMAKE_CURRENT_BINARY_DIR}/libgeotiff.pc @ONLY) INSTALL( FILES ${CMAKE_CURRENT_BINARY_DIR}/libgeotiff.pc DESTINATION "${CMAKE_INSTALL_LIBDIR}/pkgconfig") # Define grouping of source files in PROJECT file (e.g. Visual Studio) SOURCE_GROUP("CMake Files" FILES CMakeLists.txt) SOURCE_GROUP("Header Files" FILES ${GEOTIFF_LIB_HEADERS}) SOURCE_GROUP("Source Files" FILES ${GEOTIFF_LIB_SOURCES}) ############################################################################### # Build GeoTIFF utilities IF(WITH_UTILITIES) ADD_SUBDIRECTORY(bin) ENDIF() ADD_SUBDIRECTORY(cmake) message(STATUS " ################################ Summary of build options: Build shared library: ${BUILD_SHARED_LIBS} Build man pages: ${BUILD_MAN} Build doc files: ${BUILD_DOC} Build GeoTIFF utilities: ${WITH_UTILITIES} Build TIFF support: ${WITH_TIFF} Build zlib support: ${WITH_ZLIB} Build JPEG support: ${WITH_JPEG} Build TOWGS84 support: ${WITH_TOWGS84} ################################") libgeotiff-1.7.4/depcomp0000755000175000017500000005602014755113347012150 00000000000000#! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2018-03-07.03; # UTC # Copyright (C) 1999-2018 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by 'PROGRAMS ARGS'. object Object file output by 'PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputting dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit $? ;; -v | --v*) echo "depcomp $scriptversion" exit $? ;; esac # Get the directory component of the given path, and save it in the # global variables '$dir'. Note that this directory component will # be either empty or ending with a '/' character. This is deliberate. set_dir_from () { case $1 in */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; *) dir=;; esac } # Get the suffix-stripped basename of the given path, and save it the # global variable '$base'. set_base_from () { base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` } # If no dependency file was actually created by the compiler invocation, # we still have to create a dummy depfile, to avoid errors with the # Makefile "include basename.Plo" scheme. make_dummy_depfile () { echo "#dummy" > "$depfile" } # Factor out some common post-processing of the generated depfile. # Requires the auxiliary global variable '$tmpdepfile' to be set. aix_post_process_depfile () { # If the compiler actually managed to produce a dependency file, # post-process it. if test -f "$tmpdepfile"; then # Each line is of the form 'foo.o: dependency.h'. # Do two passes, one to just change these to # $object: dependency.h # and one to simply output # dependency.h: # which is needed to avoid the deleted-header problem. { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" } > "$depfile" rm -f "$tmpdepfile" else make_dummy_depfile fi } # A tabulation character. tab=' ' # A newline character. nl=' ' # Character ranges might be problematic outside the C locale. # These definitions help. upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ lower=abcdefghijklmnopqrstuvwxyz digits=0123456789 alpha=${upper}${lower} if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Avoid interferences from the environment. gccflag= dashmflag= # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi cygpath_u="cygpath -u -f -" if test "$depmode" = msvcmsys; then # This is just like msvisualcpp but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvisualcpp fi if test "$depmode" = msvc7msys; then # This is just like msvc7 but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvc7 fi if test "$depmode" = xlc; then # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. gccflag=-qmakedep=gcc,-MF depmode=gcc fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. ## Unfortunately, FreeBSD c89 acceptance of flags depends upon ## the command line argument order; so add the flags where they ## appear in depend2.am. Note that the slowdown incurred here ## affects only configure: in makefiles, %FASTDEP% shortcuts this. for arg do case $arg in -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; *) set fnord "$@" "$arg" ;; esac shift # fnord shift # $arg done "$@" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. ## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. ## (see the conditional assignment to $gccflag above). ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). Also, it might not be ## supported by the other compilers which use the 'gcc' depmode. ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The second -e expression handles DOS-style file names with drive # letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the "deleted header file" problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. ## Some versions of gcc put a space before the ':'. On the theory ## that the space means something, we add a space to the output as ## well. hp depmode also adds that space, but also prefixes the VPATH ## to the object. Take care to not repeat it in the output. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like '#:fec' to the end of the # dependency line. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ | tr "$nl" ' ' >> "$depfile" echo >> "$depfile" # The second pass generates a dummy entry for each header file. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" ;; xlc) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts '$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.u tmpdepfile2=$base.u tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else tmpdepfile1=$dir$base.u tmpdepfile2=$dir$base.u tmpdepfile3=$dir$base.u "$@" -M fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done aix_post_process_depfile ;; tcc) # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 # FIXME: That version still under development at the moment of writing. # Make that this statement remains true also for stable, released # versions. # It will wrap lines (doesn't matter whether long or short) with a # trailing '\', as in: # # foo.o : \ # foo.c \ # foo.h \ # # It will put a trailing '\' even on the last line, and will use leading # spaces rather than leading tabs (at least since its commit 0394caf7 # "Emit spaces for -MD"). "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. # We have to change lines of the first kind to '$object: \'. sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" # And for each line of the second kind, we have to emit a 'dep.h:' # dummy dependency, to avoid the deleted-header problem. sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" rm -f "$tmpdepfile" ;; ## The order of this option in the case statement is important, since the ## shell code in configure will try each of these formats in the order ## listed in this file. A plain '-MD' option would be understood by many ## compilers, so we must ensure this comes after the gcc and icc options. pgcc) # Portland's C compiler understands '-MD'. # Will always output deps to 'file.d' where file is the root name of the # source file under compilation, even if file resides in a subdirectory. # The object file name does not affect the name of the '.d' file. # pgcc 10.2 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using '\' : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... set_dir_from "$object" # Use the source, not the object, to determine the base name, since # that's sadly what pgcc will do too. set_base_from "$source" tmpdepfile=$base.d # For projects that build the same source file twice into different object # files, the pgcc approach of using the *source* file root name can cause # problems in parallel builds. Use a locking strategy to avoid stomping on # the same $tmpdepfile. lockdir=$base.d-lock trap " echo '$0: caught signal, cleaning up...' >&2 rmdir '$lockdir' exit 1 " 1 2 13 15 numtries=100 i=$numtries while test $i -gt 0; do # mkdir is a portable test-and-set. if mkdir "$lockdir" 2>/dev/null; then # This process acquired the lock. "$@" -MD stat=$? # Release the lock. rmdir "$lockdir" break else # If the lock is being held by a different process, wait # until the winning process is done or we timeout. while test -d "$lockdir" && test $i -gt 0; do sleep 1 i=`expr $i - 1` done fi i=`expr $i - 1` done trap - 1 2 13 15 if test $i -le 0; then echo "$0: failed to acquire lock after $numtries attempts" >&2 echo "$0: check lockdir '$lockdir'" >&2 exit 1 fi if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp2) # The "hp" stanza above does not work with aCC (C++) and HP's ia64 # compilers, which have integrated preprocessors. The correct option # to use with these is +Maked; it writes dependencies to a file named # 'foo.d', which lands next to the object file, wherever that # happens to be. # Much of this is similar to the tru64 case; see comments there. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.d tmpdepfile2=$dir.libs/$base.d "$@" -Wc,+Maked else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d "$@" +Maked fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" # Add 'dependent.h:' lines. sed -ne '2,${ s/^ *// s/ \\*$// s/$/:/ p }' "$tmpdepfile" >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" "$tmpdepfile2" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in 'foo.d' instead, so we check for that too. # Subdirectories are respected. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then # Libtool generates 2 separate objects for the 2 libraries. These # two compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir$base.o.d # libtool 1.5 tmpdepfile2=$dir.libs/$base.o.d # Likewise. tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d "$@" -MD fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done # Same post-processing that is required for AIX mode. aix_post_process_depfile ;; msvc7) if test "$libtool" = yes; then showIncludes=-Wc,-showIncludes else showIncludes=-showIncludes fi "$@" $showIncludes > "$tmpdepfile" stat=$? grep -v '^Note: including file: ' "$tmpdepfile" if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The first sed program below extracts the file names and escapes # backslashes for cygpath. The second sed program outputs the file # name when reading, but also accumulates all include files in the # hold buffer in order to output them again at the end. This only # works with sed implementations that can handle large buffers. sed < "$tmpdepfile" -n ' /^Note: including file: *\(.*\)/ { s//\1/ s/\\/\\\\/g p }' | $cygpath_u | sort -u | sed -n ' s/ /\\ /g s/\(.*\)/'"$tab"'\1 \\/p s/.\(.*\) \\/\1:/ H $ { s/.*/'"$tab"'/ G p }' >> "$depfile" echo >> "$depfile" # make sure the fragment doesn't end with a backslash rm -f "$tmpdepfile" ;; msvc7msys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for ':' # in the target name. This is to cope with DOS-style filenames: # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. "$@" $dashmflag | sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this sed invocation # correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift cleared=no eat=no for arg do case $cleared in no) set ""; shift cleared=yes ;; esac if test $eat = yes; then eat=no continue fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -arch) eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" # makedepend may prepend the VPATH from the source file name to the object. # No need to regex-escape $object, excess matching of '.' is harmless. sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process the last invocation # correctly. Breaking it into two sed invocations is a workaround. sed '1,2d' "$tmpdepfile" \ | tr ' ' "$nl" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E \ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi IFS=" " for arg do case "$arg" in -o) shift ;; $object) shift ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E 2>/dev/null | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" echo "$tab" >> "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; msvcmsys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: libgeotiff-1.7.4/geo_new.c0000664000175000017500000003254114622755317012370 00000000000000/********************************************************************** * * geo_new.c -- Public routines for GEOTIFF GeoKey access. * * Written By: Niles D. Ritter. * * copyright (c) 1995 Niles D. Ritter * * Permission granted to use this software, so long as this copyright * notice accompanies any products derived therefrom. * **********************************************************************/ #include #include #include #include "geotiffio.h" /* public interface */ #include "geo_tiffp.h" /* external TIFF interface */ #include "geo_keyp.h" /* private interface */ #include "geo_simpletags.h" /* private local routines */ static int ReadKey(GTIF* gt, TempKeyData* tempData, KeyEntry* entptr, GeoKey* keyptr); static void GTIFErrorFunction(GTIF* gt, int level, const char* msg, ...) { (void)gt; va_list list; va_start(list, msg); if( level == LIBGEOTIFF_WARNING ) fprintf(stderr, "Warning: "); else if( level == LIBGEOTIFF_ERROR ) fprintf(stderr, "Error: "); vfprintf(stderr, msg, list); fprintf(stderr, "\n"); va_end(list); } /********************************************************************** * * Public Routines * **********************************************************************/ /** * Given an open TIFF file, look for GTIF keys and * values and return GTIF structure. This function creates a GeoTIFF information interpretation handle (GTIF *) based on a passed in TIFF handle originally from XTIFFOpen(). Even though the argument (tif) is shown as type void *, it is really normally of type TIFF *.

The returned GTIF handle can be used to read or write GeoTIFF tags using the various GTIF functions. The handle should be destroyed using GTIFFree() before the file is closed with TIFFClose().

If the file accessed has no GeoTIFF keys, an valid (but empty) GTIF is still returned. GTIFNew() is used both for existing files being read, and for new TIFF files that will have GeoTIFF tags written to them.

*/ GTIF* GTIFNew(void *tif) { return GTIFNewEx( tif, GTIFErrorFunction, NULL ); } GTIF* GTIFNewEx(void *tif, GTErrorCallback error_callback, void* user_data) { TIFFMethod default_methods; _GTIFSetDefaultTIFF( &default_methods ); return GTIFNewWithMethodsEx( tif, &default_methods, error_callback, user_data ); } GTIF *GTIFNewSimpleTags( void *tif ) { TIFFMethod default_methods; GTIFSetSimpleTagsMethods( &default_methods ); return GTIFNewWithMethods( tif, &default_methods ); } /************************************************************************/ /* GTIFNewWithMethods() */ /* */ /* Create a new geotiff, passing in the methods structure to */ /* support not libtiff implementations without replacing the */ /* default methods. */ /************************************************************************/ GTIF* GTIFNewWithMethods(void *tif, TIFFMethod* methods) { return GTIFNewWithMethodsEx(tif, methods, GTIFErrorFunction, NULL); } GTIF* GTIFNewWithMethodsEx(void *tif, TIFFMethod* methods, GTErrorCallback error_callback, void* user_data) { TempKeyData tempData; memset( &tempData, 0, sizeof(tempData) ); GTIF* gt = (GTIF*)_GTIFcalloc( sizeof(GTIF)); if (!gt) goto failure; gt->gt_error_callback = error_callback; gt->gt_user_data = user_data; /* install TIFF file and I/O methods */ gt->gt_tif = (tiff_t *)tif; memcpy( >->gt_methods, methods, sizeof(TIFFMethod) ); /* since this is an array, GTIF will allocate the memory */ pinfo_t *data; if ( tif == NULL || !(gt->gt_methods.get)(tif, GTIFF_GEOKEYDIRECTORY, >->gt_nshorts, &data )) { /* No ProjectionInfo, create a blank one */ data=(pinfo_t*)_GTIFcalloc((4+MAX_VALUES)*sizeof(pinfo_t)); if (!data) goto failure; KeyHeader *header = (KeyHeader *)data; header->hdr_version = GvCurrentVersion; header->hdr_rev_major = GvCurrentRevision; header->hdr_rev_minor = GvCurrentMinorRev; gt->gt_nshorts=sizeof(KeyHeader)/sizeof(pinfo_t); } else { /* resize data array so it can be extended if needed */ data = (pinfo_t*) _GTIFrealloc(data,(4+MAX_VALUES)*sizeof(pinfo_t)); } gt->gt_short = data; KeyHeader *header = (KeyHeader *)data; if (header->hdr_version > GvCurrentVersion) goto failure; if (header->hdr_rev_major > GvCurrentRevision) { /* issue warning */ } /* If we got here, then the geokey can be parsed */ const int count = header->hdr_num_keys; if (count * sizeof(KeyEntry) >= (4 + MAX_VALUES) * sizeof(pinfo_t)) goto failure; gt->gt_num_keys = count; gt->gt_version = header->hdr_version; gt->gt_rev_major = header->hdr_rev_major; gt->gt_rev_minor = header->hdr_rev_minor; const int bufcount = count + MAX_KEYS; /* allow for expansion */ /* Get the PARAMS Tags, if any */ if (tif == NULL || !(gt->gt_methods.get)(tif, GTIFF_DOUBLEPARAMS, >->gt_ndoubles, >->gt_double )) { gt->gt_double=(double*)_GTIFcalloc(MAX_VALUES*sizeof(double)); if (!gt->gt_double) goto failure; } else { if( gt->gt_ndoubles > MAX_VALUES ) goto failure; /* resize data array so it can be extended if needed */ gt->gt_double = (double*) _GTIFrealloc(gt->gt_double, (MAX_VALUES)*sizeof(double)); } if ( tif == NULL || !(gt->gt_methods.get)(tif, GTIFF_ASCIIPARAMS, &tempData.tk_asciiParamsLength, &tempData.tk_asciiParams )) { tempData.tk_asciiParams = 0; tempData.tk_asciiParamsLength = 0; } else { /* last NULL doesn't count; "|" used for delimiter */ if( tempData.tk_asciiParamsLength > 0 && tempData.tk_asciiParams[tempData.tk_asciiParamsLength-1] == '\0') { --tempData.tk_asciiParamsLength; } } /* allocate space for GeoKey array and its index */ gt->gt_keys = (GeoKey *)_GTIFcalloc( sizeof(GeoKey)*bufcount); if (!gt->gt_keys) goto failure; gt->gt_keyindex = (int *)_GTIFcalloc( sizeof(int)*(MAX_KEYINDEX+1)); if (!gt->gt_keyindex) goto failure; /* Loop to get all GeoKeys */ KeyEntry *entptr = ((KeyEntry *)data) + 1; GeoKey *keyptr = gt->gt_keys; gt->gt_keymin = MAX_KEYINDEX; gt->gt_keymax = 0; for (int nIndex=1; nIndex<=count; nIndex++,entptr++) { if (!ReadKey(gt, &tempData, entptr, ++keyptr)) goto failure; /* Set up the index (start at 1, since 0=unset) */ gt->gt_keyindex[entptr->ent_key] = nIndex; } if( tempData.tk_asciiParams != NULL ) _GTIFFree( tempData.tk_asciiParams ); return gt; failure: /* Notify of error */ if( tempData.tk_asciiParams != NULL ) _GTIFFree( tempData.tk_asciiParams ); GTIFFree (gt); return (GTIF *)0; } /********************************************************************** * * Private Routines * **********************************************************************/ /* * Given KeyEntry, read in the GeoKey value location and set up * the Key structure, returning 0 if failure. */ static int ReadKey(GTIF* gt, TempKeyData* tempData, KeyEntry* entptr, GeoKey* keyptr) { keyptr->gk_key = entptr->ent_key; keyptr->gk_count = entptr->ent_count; int count = entptr->ent_count; const int offset = entptr->ent_val_offset; if (gt->gt_keymin > keyptr->gk_key) gt->gt_keymin=keyptr->gk_key; if (gt->gt_keymax < keyptr->gk_key) gt->gt_keymax=keyptr->gk_key; if (entptr->ent_location) keyptr->gk_type = (gt->gt_methods.type)(gt->gt_tif,entptr->ent_location); else keyptr->gk_type = (gt->gt_methods.type)(gt->gt_tif,GTIFF_GEOKEYDIRECTORY); switch (entptr->ent_location) { case GTIFF_LOCAL: /* store value into data value */ if (count != 1 ) { if( gt->gt_error_callback ) { gt->gt_error_callback( gt, LIBGEOTIFF_ERROR, "Key %s of TIFFTagLocation=0 has count=%d, " "whereas only 1 is legal.", GTIFKeyName(keyptr->gk_key), count); } return 0; } memcpy(&keyptr->gk_data, &(entptr->ent_val_offset), sizeof(pinfo_t)); break; case GTIFF_GEOKEYDIRECTORY: keyptr->gk_data = (char *)(gt->gt_short+offset); if (gt->gt_nshorts < offset+count) { if( gt->gt_error_callback ) { gt->gt_error_callback( gt, LIBGEOTIFF_ERROR, "Key %s of type SHORT has offset=%d and count=%d, " "but the GeoKeyDirectory tag has only %d values.", GTIFKeyName(keyptr->gk_key), offset, count, gt->gt_nshorts); } return 0; } break; case GTIFF_DOUBLEPARAMS: keyptr->gk_data = (char *)(gt->gt_double+offset); if (gt->gt_ndoubles < offset+count) { if( gt->gt_error_callback ) { gt->gt_error_callback( gt, LIBGEOTIFF_ERROR, "Key %s of type SHORT has offset=%d and count=%d, " "but the GeoDoubleParams tag has only %d values.", GTIFKeyName(keyptr->gk_key), offset, count, gt->gt_ndoubles); } return 0; } break; case GTIFF_ASCIIPARAMS: if( tempData->tk_asciiParams == NULL ) { if( gt->gt_error_callback ) { gt->gt_error_callback( gt, LIBGEOTIFF_ERROR, "Key %s is of type ASCII but GeoAsciiParams is " "missing or corrupted.", GTIFKeyName(keyptr->gk_key)); } return 0; } if( offset + count == tempData->tk_asciiParamsLength + 1 && count > 0 ) { /* some vendors seem to feel they should not use the terminating '|' char, but do include a terminating '\0' which we lose in the low level reading code. If this is the case, drop the extra character */ count--; } else if (offset < tempData->tk_asciiParamsLength && offset + count > tempData->tk_asciiParamsLength ) { if( gt->gt_error_callback ) { gt->gt_error_callback( gt, LIBGEOTIFF_WARNING, "Key %s of type ASCII has offset=%d and count=%d, but " "the GeoAsciiParams tag has only %d bytes. " "Truncating the value of the key.", GTIFKeyName(keyptr->gk_key), offset, count, tempData->tk_asciiParamsLength); } count = tempData->tk_asciiParamsLength - offset; } else if (offset + count > tempData->tk_asciiParamsLength) { if( gt->gt_error_callback ) { gt->gt_error_callback( gt, LIBGEOTIFF_ERROR, "Key %s of type ASCII has offset=%d and count=%d, " "but the GeoAsciiParams tag has only %d values.", GTIFKeyName(keyptr->gk_key), offset, count, tempData->tk_asciiParamsLength); } return 0; } keyptr->gk_count = MAX(1,count+1); keyptr->gk_data = (char *) _GTIFcalloc (keyptr->gk_count); _GTIFmemcpy (keyptr->gk_data, tempData->tk_asciiParams + offset, count); if( keyptr->gk_data[MAX(0,count-1)] == '|' ) { keyptr->gk_data[MAX(0,count-1)] = '\0'; keyptr->gk_count = count; } else keyptr->gk_data[MAX(0,count)] = '\0'; break; default: if( gt->gt_error_callback ) { gt->gt_error_callback( gt, LIBGEOTIFF_ERROR, "Key %d of unknown type.", keyptr->gk_key); } return 0; /* failure */ } keyptr->gk_size = _gtiff_size[keyptr->gk_type]; return 1; /* success */ } void *GTIFGetUserData(GTIF *gtif) { return gtif->gt_user_data; } libgeotiff-1.7.4/epsg_datum.inc0000664000175000017500000001400014622755317013412 00000000000000/* * EPSG/POSC Datum database -- GeoTIFF Rev. 0.2 */ /* C database for Geotiff include files. */ /* the macro ValuePair() must be defined */ /* by the enclosing include file */ #ifdef INCLUDE_OLD_CODES #include old_datum.inc #endif /* OLD Codes */ /* New datums */ ValuePair(Datum_Dealul_Piscului_1970,6317) /* Datums for which only the ellipsoid is known */ ValuePair(DatumE_Airy1830, 6001) ValuePair(DatumE_AiryModified1849, 6002) ValuePair(DatumE_AustralianNationalSpheroid, 6003) ValuePair(DatumE_Bessel1841, 6004) ValuePair(DatumE_BesselModified, 6005) ValuePair(DatumE_BesselNamibia, 6006) ValuePair(DatumE_Clarke1858, 6007) ValuePair(DatumE_Clarke1866, 6008) ValuePair(DatumE_Clarke1866Michigan, 6009) ValuePair(DatumE_Clarke1880_Benoit, 6010) ValuePair(DatumE_Clarke1880_IGN, 6011) ValuePair(DatumE_Clarke1880_RGS, 6012) ValuePair(DatumE_Clarke1880_Arc, 6013) ValuePair(DatumE_Clarke1880_SGA1922, 6014) ValuePair(DatumE_Everest1830_1937Adjustment, 6015) ValuePair(DatumE_Everest1830_1967Definition, 6016) ValuePair(DatumE_Everest1830_1975Definition, 6017) ValuePair(DatumE_Everest1830Modified, 6018) ValuePair(DatumE_GRS1980, 6019) ValuePair(DatumE_Helmert1906, 6020) ValuePair(DatumE_IndonesianNationalSpheroid, 6021) ValuePair(DatumE_International1924, 6022) ValuePair(DatumE_International1967, 6023) ValuePair(DatumE_Krassowsky1960, 6024) ValuePair(DatumE_NWL9D, 6025) ValuePair(DatumE_NWL10D, 6026) ValuePair(DatumE_Plessis1817, 6027) ValuePair(DatumE_Struve1860, 6028) ValuePair(DatumE_WarOffice, 6029) ValuePair(DatumE_WGS84, 6030) ValuePair(DatumE_GEM10C, 6031) ValuePair(DatumE_OSU86F, 6032) ValuePair(DatumE_OSU91A, 6033) ValuePair(DatumE_Clarke1880, 6034) ValuePair(DatumE_Sphere, 6035) /* standard datums */ ValuePair(Datum_Adindan, 6201) ValuePair(Datum_Australian_Geodetic_Datum_1966, 6202) ValuePair(Datum_Australian_Geodetic_Datum_1984, 6203) ValuePair(Datum_Ain_el_Abd_1970, 6204) ValuePair(Datum_Afgooye, 6205) ValuePair(Datum_Agadez, 6206) ValuePair(Datum_Lisbon, 6207) ValuePair(Datum_Aratu, 6208) ValuePair(Datum_Arc_1950, 6209) ValuePair(Datum_Arc_1960, 6210) ValuePair(Datum_Batavia, 6211) ValuePair(Datum_Barbados, 6212) ValuePair(Datum_Beduaram, 6213) ValuePair(Datum_Beijing_1954, 6214) ValuePair(Datum_Reseau_National_Belge_1950, 6215) ValuePair(Datum_Bermuda_1957, 6216) ValuePair(Datum_Bern_1898, 6217) ValuePair(Datum_Bogota, 6218) ValuePair(Datum_Bukit_Rimpah, 6219) ValuePair(Datum_Camacupa, 6220) ValuePair(Datum_Campo_Inchauspe, 6221) ValuePair(Datum_Cape, 6222) ValuePair(Datum_Carthage, 6223) ValuePair(Datum_Chua, 6224) ValuePair(Datum_Corrego_Alegre, 6225) ValuePair(Datum_Cote_d_Ivoire, 6226) ValuePair(Datum_Deir_ez_Zor, 6227) ValuePair(Datum_Douala, 6228) ValuePair(Datum_Egypt_1907, 6229) ValuePair(Datum_European_Datum_1950, 6230) ValuePair(Datum_European_Datum_1987, 6231) ValuePair(Datum_Fahud, 6232) ValuePair(Datum_Gandajika_1970, 6233) ValuePair(Datum_Garoua, 6234) ValuePair(Datum_Guyane_Francaise, 6235) ValuePair(Datum_Hu_Tzu_Shan, 6236) ValuePair(Datum_Hungarian_Datum_1972, 6237) ValuePair(Datum_Indonesian_Datum_1974, 6238) ValuePair(Datum_Indian_1954, 6239) ValuePair(Datum_Indian_1975, 6240) ValuePair(Datum_Jamaica_1875, 6241) ValuePair(Datum_Jamaica_1969, 6242) ValuePair(Datum_Kalianpur, 6243) ValuePair(Datum_Kandawala, 6244) ValuePair(Datum_Kertau, 6245) ValuePair(Datum_Kuwait_Oil_Company, 6246) ValuePair(Datum_La_Canoa, 6247) ValuePair(Datum_Provisional_S_American_Datum_1956, 6248) ValuePair(Datum_Lake, 6249) ValuePair(Datum_Leigon, 6250) ValuePair(Datum_Liberia_1964, 6251) ValuePair(Datum_Lome, 6252) ValuePair(Datum_Luzon_1911, 6253) ValuePair(Datum_Hito_XVIII_1963, 6254) ValuePair(Datum_Herat_North, 6255) ValuePair(Datum_Mahe_1971, 6256) ValuePair(Datum_Makassar, 6257) ValuePair(Datum_European_Reference_System_1989, 6258) ValuePair(Datum_Malongo_1987, 6259) ValuePair(Datum_Manoca, 6260) ValuePair(Datum_Merchich, 6261) ValuePair(Datum_Massawa, 6262) ValuePair(Datum_Minna, 6263) ValuePair(Datum_Mhast, 6264) ValuePair(Datum_Monte_Mario, 6265) ValuePair(Datum_M_poraloko, 6266) ValuePair(Datum_North_American_Datum_1927, 6267) ValuePair(Datum_NAD_Michigan, 6268) ValuePair(Datum_North_American_Datum_1983, 6269) ValuePair(Datum_Nahrwan_1967, 6270) ValuePair(Datum_Naparima_1972, 6271) ValuePair(Datum_New_Zealand_Geodetic_Datum_1949, 6272) ValuePair(Datum_NGO_1948, 6273) ValuePair(Datum_Datum_73, 6274) ValuePair(Datum_Nouvelle_Triangulation_Francaise, 6275) ValuePair(Datum_NSWC_9Z_2, 6276) ValuePair(Datum_OSGB_1936, 6277) ValuePair(Datum_OSGB_1970_SN, 6278) ValuePair(Datum_OS_SN_1980, 6279) ValuePair(Datum_Padang_1884, 6280) ValuePair(Datum_Palestine_1923, 6281) ValuePair(Datum_Pointe_Noire, 6282) ValuePair(Datum_Geocentric_Datum_of_Australia_1994, 6283) ValuePair(Datum_Pulkovo_1942, 6284) ValuePair(Datum_Qatar, 6285) ValuePair(Datum_Qatar_1948, 6286) ValuePair(Datum_Qornoq, 6287) ValuePair(Datum_Loma_Quintana, 6288) ValuePair(Datum_Amersfoort, 6289) ValuePair(Datum_RT38, 6290) ValuePair(Datum_South_American_Datum_1969, 6291) ValuePair(Datum_Sapper_Hill_1943, 6292) ValuePair(Datum_Schwarzeck, 6293) ValuePair(Datum_Segora, 6294) ValuePair(Datum_Serindung, 6295) ValuePair(Datum_Sudan, 6296) ValuePair(Datum_Tananarive_1925, 6297) ValuePair(Datum_Timbalai_1948, 6298) ValuePair(Datum_TM65, 6299) ValuePair(Datum_TM75, 6300) ValuePair(Datum_Tokyo, 6301) ValuePair(Datum_Trinidad_1903, 6302) ValuePair(Datum_Trucial_Coast_1948, 6303) ValuePair(Datum_Voirol_1875, 6304) ValuePair(Datum_Voirol_Unifie_1960, 6305) ValuePair(Datum_Bern_1938, 6306) ValuePair(Datum_Nord_Sahara_1959, 6307) ValuePair(Datum_Stockholm_1938, 6308) ValuePair(Datum_Yacare, 6309) ValuePair(Datum_Yoff, 6310) ValuePair(Datum_Zanderij, 6311) ValuePair(Datum_Militar_Geographische_Institut, 6312) ValuePair(Datum_Reseau_National_Belge_1972, 6313) ValuePair(Datum_Deutsche_Hauptdreiecksnetz, 6314) ValuePair(Datum_Conakry_1905, 6315) ValuePair(Datum_WGS72, 6322) ValuePair(Datum_WGS72_Transit_Broadcast_Ephemeris, 6324) ValuePair(Datum_WGS84, 6326) ValuePair(Datum_Ancienne_Triangulation_Francaise, 6901) ValuePair(Datum_Nord_de_Guerre, 6902) /* end of list */ libgeotiff-1.7.4/autogen.sh0000775000175000017500000000224414020740032012553 00000000000000#!/bin/sh # $Id: autogen.sh 61 2007-12-11 20:13:48Z hobu $ # # Autotools boostrapping script # # We deliberately limit this to automake and autoconf since # we don't want geo_config.h.in regenerated automatically. # giveup() { echo echo " Something went wrong, giving up!" echo mv geo_config.h.in.safe geo_config.h.in exit 1 } cp geo_config.h.in geo_config.h.in.safe OSTYPE=`uname -s` for libtoolize in glibtoolize libtoolize; do LIBTOOLIZE=`which $libtoolize 2>/dev/null` if test "$LIBTOOLIZE"; then break; fi done #AMFLAGS="--add-missing --copy --force-missing" AMFLAGS="--add-missing --copy" if test "$OSTYPE" = "IRIX" -o "$OSTYPE" = "IRIX64"; then AMFLAGS=$AMFLAGS" --include-deps"; fi echo "Running aclocal" aclocal || giveup #echo "Running autoheader" #autoheader || giveup echo "Running libtoolize" $LIBTOOLIZE --force --copy || giveup echo "Running automake" automake $AMFLAGS # || giveup echo "Running autoconf" autoconf || giveup mv geo_config.h.in.safe geo_config.h.in echo "======================================" echo "Now you are ready to run './configure'" echo "======================================" libgeotiff-1.7.4/geo_names.c0000664000175000017500000002160514622755317012701 00000000000000/* * geo_names.c * * This encapsulates all of the value-naming mechanism of * libgeotiff. * * Written By: Niles Ritter * * copyright (c) 1995 Niles D. Ritter * * Permission granted to use this software, so long as this copyright * notice accompanies any products derived therefrom. * */ #include "geotiffio.h" #include "geonames.h" #include "geo_tiffp.h" /* for tag names */ #include "geo_keyp.h" #include "proj.h" static const KeyInfo _formatInfo[] = { {TYPE_BYTE, "Byte"}, {TYPE_SHORT, "Short"}, {TYPE_LONG, "Long"}, {TYPE_RATIONAL,"Rational"}, {TYPE_ASCII, "Ascii"}, {TYPE_FLOAT, "Float"}, {TYPE_DOUBLE, "Double"}, {TYPE_SBYTE, "SignedByte"}, {TYPE_SSHORT, "SignedShort"}, {TYPE_SLONG, "SignedLong"}, {TYPE_UNKNOWN, "Unknown"}, END_LIST }; static const KeyInfo _tagInfo[] = { {GTIFF_PIXELSCALE, "ModelPixelScaleTag"}, {GTIFF_TRANSMATRIX, "ModelTransformationTag"}, {GTIFF_TIEPOINTS, "ModelTiepointTag"}, /* This alias maps the Intergraph symbol to the current tag */ {GTIFF_TRANSMATRIX, "IntergraphMatrixTag"}, END_LIST }; static const char *FindName(const KeyInfo *info,int key) { while (info->ki_key>=0 && info->ki_key != key) info++; if (info->ki_key<0) { static char errmsg[80]; sprintf(errmsg,"Unknown-%d", key ); return errmsg; } return info->ki_name; } char *GTIFKeyName(geokey_t key) { return (char*) FindName( &_keyInfo[0],key); } const char* GTIFKeyNameEx(GTIF* gtif, geokey_t key) { const KeyInfo *info; if( gtif->gt_version == GEOTIFF_SPEC_1_0_VERSION && gtif->gt_rev_major == GEOTIFF_SPEC_1_0_KEY_REVISION && gtif->gt_rev_minor == GEOTIFF_SPEC_1_0_MINOR_REVISION ) { info = &_keyInfo[0]; } else { info = &_keyInfoV11[0]; } while (info->ki_key>=0 && info->ki_key != (int)key) info++; if (info->ki_key<0) { sprintf(gtif->szTmpBufferForGTIFValueNameEx,"Unknown-%d", key ); return gtif->szTmpBufferForGTIFValueNameEx; } return info->ki_name; } char *GTIFTypeName(tagtype_t type) { return (char*) FindName( &_formatInfo[0],type); } char *GTIFTagName(int tag) { return (char*) FindName( &_tagInfo[0],tag); } static const KeyInfo* FindTable(geokey_t key) { const KeyInfo *info; switch (key) { /* All codes using linear/angular/whatever units */ case GeogLinearUnitsGeoKey: case ProjLinearUnitsGeoKey: case GeogAngularUnitsGeoKey: case GeogAzimuthUnitsGeoKey: case VerticalUnitsGeoKey: info=_geounitsValue; break; /* put other key-dependent lists here */ case GTModelTypeGeoKey: info=_modeltypeValue; break; case GTRasterTypeGeoKey: info=_rastertypeValue; break; case GeographicTypeGeoKey: info=_geographicValue; break; case GeogGeodeticDatumGeoKey: info=_geodeticdatumValue; break; case GeogEllipsoidGeoKey: info=_ellipsoidValue; break; case GeogPrimeMeridianGeoKey: info=_primemeridianValue; break; case ProjectedCSTypeGeoKey: info=_pcstypeValue; break; case ProjectionGeoKey: info=_projectionValue; break; case ProjCoordTransGeoKey: info=_coordtransValue; break; case VerticalCSTypeGeoKey: info=_vertcstypeValue; break; case VerticalDatumGeoKey: info=_vdatumValue; break; /* And if all else fails... */ default: info = _csdefaultValue;break; } return info; } char *GTIFValueName(geokey_t key, int value) { return (char*) FindName(FindTable(key), value); } static void GetNameFromDatabase(GTIF* gtif, const char* pszCode, PJ_CATEGORY category, char* pszOut, size_t nOutSize) { PJ* obj = proj_create_from_database( gtif->pj_context, "EPSG", pszCode, category, FALSE, NULL); if( obj ) { const char* pszName = proj_get_name(obj); if( pszName ) { size_t nToCopy = MIN(strlen(pszName), nOutSize - 1); memcpy(pszOut, pszName, nToCopy); pszOut[nToCopy] = 0; } proj_destroy(obj); } else { pszOut[0] = 0; } } const char *GTIFValueNameEx(GTIF* gtif, geokey_t key, int value) { int useHardcodedTables = 0; if( value == KvUndefined || value == KvUserDefined ) { useHardcodedTables = 1; } else if( gtif->gt_version == GEOTIFF_SPEC_1_0_VERSION && gtif->gt_rev_major == GEOTIFF_SPEC_1_0_KEY_REVISION && gtif->gt_rev_minor == GEOTIFF_SPEC_1_0_MINOR_REVISION ) { useHardcodedTables = 1; } else if( key == GTModelTypeGeoKey || key == GTRasterTypeGeoKey || key == ProjCoordTransGeoKey ) { useHardcodedTables = 1; } else if( key == VerticalCSTypeGeoKey && value >= 5001 && value <= 5033 ) { useHardcodedTables = 1; } const KeyInfo *info = FindTable(key); if( useHardcodedTables ) { while (info->ki_key>=0 && info->ki_key != value) info++; } if ( !useHardcodedTables || info->ki_key<0 ) { sprintf(gtif->szTmpBufferForGTIFValueNameEx,"Unknown-%d", value ); if( gtif->pj_context == NULL ) { gtif->pj_context = proj_context_create(); if( gtif->pj_context ) { gtif->own_pj_context = TRUE; } } if( gtif->pj_context ) { char szCode[12]; char szName[120]; szName[0] = 0; sprintf(szCode, "%d", value); switch (key) { /* All codes using linear/angular/whatever units */ case GeogLinearUnitsGeoKey: case ProjLinearUnitsGeoKey: case GeogAngularUnitsGeoKey: case GeogAzimuthUnitsGeoKey: case VerticalUnitsGeoKey: { const char* pszName = NULL; if( proj_uom_get_info_from_database(gtif->pj_context, "EPSG", szCode, &pszName, NULL, NULL) && pszName ) { strncpy(szName, pszName, sizeof(szName)); szName[sizeof(szName)-1] = 0; } break; } case GeogGeodeticDatumGeoKey: case VerticalDatumGeoKey: GetNameFromDatabase(gtif, szCode, PJ_CATEGORY_DATUM, szName, sizeof(szName)); break; case GeogEllipsoidGeoKey: GetNameFromDatabase(gtif, szCode, PJ_CATEGORY_ELLIPSOID, szName, sizeof(szName)); break; case GeogPrimeMeridianGeoKey: GetNameFromDatabase(gtif, szCode, PJ_CATEGORY_PRIME_MERIDIAN, szName, sizeof(szName)); break; case GeographicTypeGeoKey: case ProjectedCSTypeGeoKey: case VerticalCSTypeGeoKey: GetNameFromDatabase(gtif, szCode, PJ_CATEGORY_CRS, szName, sizeof(szName)); break; case ProjectionGeoKey: GetNameFromDatabase(gtif, szCode, PJ_CATEGORY_COORDINATE_OPERATION, szName, sizeof(szName)); break; default: break; } if( szName[0] != 0 ) { sprintf(gtif->szTmpBufferForGTIFValueNameEx, "Code-%d (%s)", value, szName ); } } return gtif->szTmpBufferForGTIFValueNameEx; } return info->ki_name; } /* * Inverse Utilities (name->code) */ static int FindCode(const KeyInfo *info,const char *key) { while (info->ki_key>=0 && strcmp(info->ki_name,key) ) info++; if (info->ki_key<0) { /* not a registered key; might be generic code */ if (!strncmp(key,"Unknown-",8)) { int code=-1; sscanf(key,"Unknown-%d",&code); return code; } else if (!strncmp(key,"Code-",5)) { int code=-1; sscanf(key,"Code-%d",&code); return code; } else return -1; } return info->ki_key; } int GTIFKeyCode(const char *key) { int ret = FindCode( &_keyInfo[0],key); if( ret < 0 ) ret = FindCode( &_keyInfoV11[0],key); return ret; } int GTIFTypeCode(const char *type) { return FindCode( &_formatInfo[0],type); } int GTIFTagCode(const char *tag) { return FindCode( &_tagInfo[0],tag); } /* * The key must be determined with GTIFKeyCode() before * the name can be encoded. */ int GTIFValueCode(geokey_t key, const char *name) { return FindCode(FindTable(key),name); } libgeotiff-1.7.4/geotiffio.h0000664000175000017500000000074014020740032012675 00000000000000/* * geotiffio.h * * Standard include file for geotiff, including all * key and code definitions. * * copyright (c) 1995 Niles D. Ritter * * Permission granted to use this software, so long as this copyright * notice accompanies any products derived therefrom. */ #ifndef LIBGEOTIFF_GEOTIFFIO_H_ #define LIBGEOTIFF_GEOTIFFIO_H_ #include "geotiff.h" /* public key interface */ #include "geovalues.h" /* key code definitions */ #endif /* LIBGEOTIFF_GEOTIFFIO_H_ */ libgeotiff-1.7.4/geo_print.c0000664000175000017500000003251614622755317012735 00000000000000/********************************************************************** * * geo_print.c -- Key-dumping routines for GEOTIFF files. * * Written By: Niles D. Ritter. * * copyright (c) 1995 Niles D. Ritter * * Permission granted to use this software, so long as this copyright * notice accompanies any products derived therefrom. * **********************************************************************/ #include #include #include "geotiff.h" /* public interface */ #include "geo_tiffp.h" /* external TIFF interface */ #include "geo_keyp.h" /* private interface */ #include "geokeys.h" #define FMT_GEOTIFF "Geotiff_Information:" #define FMT_VERSION "Version: %hu" #define FMT_REV "Key_Revision: %1hu.%hu" #define FMT_TAGS "Tagged_Information:" #define FMT_TAGEND "End_Of_Tags." #define FMT_KEYS "Keyed_Information:" #define FMT_KEYEND "End_Of_Keys." #define FMT_GEOEND "End_Of_Geotiff." #define FMT_DOUBLE "%-17.15g" #define FMT_SHORT "%-11hu" static int DefaultPrint(char *string, void *aux); static void PrintKey(GTIF *gtif,GeoKey *key, GTIFPrintMethod print,void *aux); static void PrintGeoTags(GTIF *gtif,GTIFReadMethod scan,void *aux); static void PrintTag(int tag, int nrows, double *data, int ncols, GTIFPrintMethod print,void *aux); static int DefaultRead(char *string, void *aux); static int ReadKey(GTIF *gt, GTIFReadMethod scan, void *aux); static int ReadTag(GTIF *gt,GTIFReadMethod scan,void *aux); /* * Print off the directory info, using whatever method is specified * (defaults to fprintf if null). The "aux" parameter is provided for user * defined method for passing parameters or whatever. * * The output format is a "GeoTIFF meta-data" file, which may be * used to import information with the GTIFFImport() routine. */ void GTIFPrint(GTIF *gtif, GTIFPrintMethod print,void *aux) { if (!print) print = &DefaultPrint; if (!aux) aux=stdout; char message[1024]; sprintf(message,FMT_GEOTIFF "\n"); print(message,aux); sprintf(message, FMT_VERSION,gtif->gt_version); print(" ",aux); print(message,aux); print("\n",aux); sprintf(message, FMT_REV,gtif->gt_rev_major, gtif->gt_rev_minor); print(" ",aux); print(message,aux); print("\n",aux); sprintf(message," %s\n",FMT_TAGS); print(message,aux); PrintGeoTags(gtif,print,aux); sprintf(message," %s\n",FMT_TAGEND); print(message,aux); sprintf(message," %s\n",FMT_KEYS); print(message,aux); int numkeys = gtif->gt_num_keys; GeoKey *key = gtif->gt_keys; for (int i=0; igt_tif; if( tif == NULL ) return; double *data; int count; if ((gt->gt_methods.get)(tif, GTIFF_TIEPOINTS, &count, &data )) PrintTag(GTIFF_TIEPOINTS,count/3, data, 3, print, aux); if ((gt->gt_methods.get)(tif, GTIFF_PIXELSCALE, &count, &data )) PrintTag(GTIFF_PIXELSCALE,count/3, data, 3, print, aux); if ((gt->gt_methods.get)(tif, GTIFF_TRANSMATRIX, &count, &data )) PrintTag(GTIFF_TRANSMATRIX,count/4, data, 4, print, aux); } static void PrintTag(int tag, int nrows, double *dptr, int ncols, GTIFPrintMethod print,void *aux) { print(" ",aux); print(GTIFTagName(tag),aux); char message[1024]; sprintf(message," (%d,%d):\n",nrows,ncols); print(message,aux); double *data=dptr; for (int i=0;igk_key; print((char*)GTIFKeyNameEx(gtif, keyid),aux); int count = (int) key->gk_count; char message[40]; sprintf(message," (%s,%d): ",GTIFTypeName(key->gk_type),count); print(message,aux); char *data; if (key->gk_type==TYPE_SHORT && count==1) data = (char *)&key->gk_data; else data = key->gk_data; int vals_now; pinfo_t *sptr; double *dptr; switch (key->gk_type) { case TYPE_ASCII: { print("\"",aux); int in_char = 0; int out_char = 0; while( in_char < count-1 ) { const char ch = ((char *) data)[in_char++]; if( ch == '\n' ) { message[out_char++] = '\\'; message[out_char++] = 'n'; } else if( ch == '\\' ) { message[out_char++] = '\\'; message[out_char++] = '\\'; } else message[out_char++] = ch; /* flush message if buffer full */ if( (size_t)out_char >= sizeof(message)-3 ) { message[out_char] = '\0'; print(message,aux); out_char = 0; } } message[out_char]='\0'; print(message,aux); print("\"\n",aux); } break; case TYPE_DOUBLE: for (dptr = (double *)data; count > 0; count-= vals_now) { vals_now = count > 3? 3: count; for (int i=0; i 0 ) print( "****Corrupted data****\n", aux ); else { for (; count > 0; count-= vals_now) { vals_now = count > 3? 3: count; for (int i=0; igk_type); print(message,aux); break; } } static int DefaultPrint(char *string, void *aux) { /* Pretty boring */ fprintf((FILE *)aux,"%s",string); return 1; } /* * Importing metadata file */ /* * Import the directory info, using whatever method is specified * (defaults to fscanf if null). The "aux" parameter is provided for user * defined method for passing file or whatever. * * The input format is a "GeoTIFF meta-data" file, which may be * generated by the GTIFFPrint() routine. */ int GTIFImport(GTIF *gtif, GTIFReadMethod scan,void *aux) { if (!scan) scan = &DefaultRead; if (!aux) aux=stdin; /* Caution: if you change this size, also change it in DefaultRead */ char message[1024]; scan(message,aux); if (strncmp(message,FMT_GEOTIFF,8)) return 0; scan(message,aux); if (!sscanf(message,FMT_VERSION,(short unsigned*)>if->gt_version)) return 0; scan(message,aux); if (sscanf(message,FMT_REV,(short unsigned*)>if->gt_rev_major, (short unsigned*)>if->gt_rev_minor) !=2) return 0; scan(message,aux); if (strncmp(message,FMT_TAGS,8)) return 0; int status; while ((status=ReadTag(gtif,scan,aux))>0); if (status < 0) return 0; scan(message,aux); if (strncmp(message,FMT_KEYS,8)) return 0; while ((status=ReadKey(gtif,scan,aux))>0); return (status==0); /* success */ } static int StringError(char *string) { fprintf(stderr,"Parsing Error at \'%s\'\n",string); return -1; } #define SKIPWHITE(vptr) \ while (*vptr && (*vptr==' '||*vptr=='\t')) vptr++ #define FINDCHAR(vptr,c) \ while (*vptr && *vptr!=(c)) vptr++ static int ReadTag(GTIF *gt,GTIFReadMethod scan,void *aux) { char message[1024]; scan(message,aux); if (!strncmp(message,FMT_TAGEND,8)) return 0; char tagname[100]; int nrows; int ncols; const int num=sscanf(message,"%99[^( ] (%d,%d):\n",tagname,&nrows,&ncols); if (num!=3) return StringError(message); const int tag = GTIFTagCode(tagname); if (tag < 0) return StringError(tagname); const int count = nrows*ncols; double *data = (double *) _GTIFcalloc(count * sizeof(double)); double *dptr = data; for (int i=0;igt_methods.set)(gt->gt_tif, (pinfo_t) tag, count, data ); _GTIFFree( data ); return 1; } static int ReadKey(GTIF *gt, GTIFReadMethod scan, void *aux) { char message[2048]; scan(message,aux); if (!strncmp(message,FMT_KEYEND,8)) return 0; char name[1000]; char type[20]; int count; const int num = sscanf(message,"%99[^( ] (%19[^,],%d):\n",name,type,&count); if (num!=3) return StringError(message); char *vptr = message; FINDCHAR(vptr,':'); if (!*vptr) return StringError(message); vptr+=2; const int keycode = GTIFKeyCode(name); geokey_t key; if( keycode < 0 ) return StringError(name); else key = (geokey_t) keycode; const int typecode = GTIFTypeCode(type); tagtype_t ktype; if( typecode < 0 ) return StringError(type); else ktype = (tagtype_t) typecode; /* skip white space */ SKIPWHITE(vptr); if (!*vptr) return StringError(message); int outcount; int vals_now; int icode; pinfo_t code; short *sptr; double *dptr; switch (ktype) { case TYPE_ASCII: { char *cdata; int out_char = 0; FINDCHAR(vptr,'"'); if (!*vptr) return StringError(message); cdata = (char *) _GTIFcalloc( count+1 ); vptr++; while( out_char < count-1 ) { if( *vptr == '\0' ) break; else if( vptr[0] == '\\' && vptr[1] == 'n' ) { cdata[out_char++] = '\n'; vptr += 2; } else if( vptr[0] == '\\' && vptr[1] == '\\' ) { cdata[out_char++] = '\\'; vptr += 2; } else cdata[out_char++] = *(vptr++); } if( out_char < count-1 || *vptr != '"' ) { _GTIFFree( cdata ); return StringError(message); } cdata[count-1] = '\0'; GTIFKeySet(gt,key,ktype,count,cdata); _GTIFFree( cdata ); } break; case TYPE_DOUBLE: { double data[100]; outcount = count; for (dptr = data; count > 0; count-= vals_now) { vals_now = count > 3? 3: count; for (int i=0; i 0; count-= vals_now) { vals_now = count > 3? 3: count; for (int i=0; i * geo_print.c: fix wrong test in DefaultRead() that caused erroenous error message to be emitted. * Prepare for 1.4.3RC2 2018-12-07 Even Rouault * Prepare for 1.4.3 2018-05-23 Even Rouault * geo_set.c: when rewriting a ASCII key with a string value longer than the original value, do not add a dummy "0 0 0 0" entry in the GeoKeyDirectory (fixes https://github.com/OSGeo/gdal/issues/641) 2018-05-11 Even Rouault * geo_set.c: remove useless va_end() as spotted by clang-tidy 2018-02-06 Even Rouault * geo_new.c: reject files where the GTIFF_DOUBLEPARAMS tags has more than MAX_VALUES=1000 values to avoid potential out-of-bounds read overflow. Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=6035 Credit to OSS Fuzz 2018-01-26 Even Rouault * geo_normalize.c: use ProjScaleAtCenterGeoKey for CT_Mercator if ProjScaleAtNatOriginGeoKey is not set. Fixes https://github.com/OSGeo/gdal/pull/296 2018-01-09 Even Rouault * geo_normalize.c: fix potential stack buffer overflow in GTIFAngleToDD() Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=5059 Credit to OSS Fuzz 2017-12-17 Even Rouault * csv/*: update to EPSG v9.2 2017-06-08 Even Rouault * geotiff.h, geo_keyp.h, geo_normalize.c, geo_new.c: add GTIFNewEx() and GTIFNewWithMethodsEx() functions that accept a user-provided error printing callback (only called by geo_normalize right now, instead of fprintf(stderr)) and a user data handle. Add GTIFGetUserData(). Upgrade LIBGEOTIFF_VERSION to 1430. 2017-04-14 Even Rouault * *.h, libxtiff/xtiffio.h: replace CPL_DLL by GTIF_DLL 2017-01-10 Even Rouault * csv/*: update to EPSG v9.0 (#83) 2017-01-10 Even Rouault * csv/datum_shift_pref.csv: add overrides for PCS 2065 (S-JTSK (Ferro) / Krovak) Fixes https://trac.osgeo.org/gdal/ticket/4762 and https://github.com/OSGeo/proj.4/issues/185 2017-01-10 Even Rouault * csv/datum_shift_pref.csv: add overrides for PCS 2397/2398/2399 (Pulkovo 1942(83) / 3-degree Gauss-Kruger zone 3,4,5) Fixes https://github.com/OSGeo/proj.4/issues/235 2017-01-10 Even Rouault * csv/datum_shift_pref.csv: add overrides for PCS 31251,31252,31253 (MGI (Ferro) / Austria) Fixes https://github.com/OSGeo/proj.4/issues/254 2017-01-10 Even Rouault * csv/build_pcs.py, csv/datum_shift_pref.csv: add mechanism to define TOWGS84 parameters per PCS (instead of only relying on the TOWGS84 parameters of the underlying GCS). Add override for EPSG:3844 ("Pulkovo 1942(58) / Stereo70" Romania) Fixes https://trac.osgeo.org/geotiff/ticket/52 2017-01-10 Even Rouault * csv/datum_shift_pref.csv: add override for CH1903 (EPSG:4149) Fixes https://trac.osgeo.org/geotiff/ticket/73 2016-11-23 Even Rouault * geo_new.c, geo_print.c, geo_set.c, bin/applygeo.c, bin/geotifcp.c, bin/makegeo.c: cppcheck fixes (signed vs unsigned printf/sscanf, redundantAssignment) 2016-11-21 Even Rouault * geo_print.c: secure sscanf()/fscanf() uses. 2016-11-20 Even Rouault * geo_simpletags.c: add cppcheck-suppress duplicateBranch annotation. 2016-09-04 Even Rouault * White space fixes in .h and .c 2016-09-01 Even Rouault * geotiff.h cpl_serv.h: Partial revert of r2736 to revert back including "geo_config.h" (#81) 2016-08-18 Even Rouault * Makefile.am: Fix build issue on Windows with cmake by not including generate geo_config.h in the dist .zip/.tar.gz * geotiff.h cpl_serv.h: change #include "geo_config.h" to #include * cpl_serv.h: do not include on _WIN32 even if HAVE_STRINGS_H is defined * cpl_config.h.vc: remove #define HAVE_STRINGS_H 1 * cpl_serv.c: remove includes of string.h and strings.h. Already done by cpl_serv.h * Prepare for 1.4.2RC4 2016-08-17 Even Rouault * Prepare for 1.4.2RC3 2016-08-17 Howard Butler * csv: update to EPSG v8.9 2016-08-16 Even Rouault * Makefile.am: add subdir-objects to AUTOMAKE_OPTIONS. Patch by Bas Couwenberg (#80) 2016-08-16 Even Rouault * add autogen.sh in extradist * run it on a newer system * prepare for 1.4.2RC2 2016-08-16 Even Rouault * make dist: include files in docs/ directory (#78) 2016-08-16 Even Rouault * CMake: install man pages 2016-08-16 Even Rouault * Add manpages for applygeo & geotifcp, also fix listgeo manpage. Patch by Bas Couwenberg 2016-08-16 Even Rouault * Don't install makegeo. makegeo.c serves as a minimal example of creating a geotiff file. Installing the executable has no value. Patch by Bas Couwenberg 2016-08-16 Even Rouault * Preparing 1.4.2 release. 2016-08-16 Even Rouault * Fix warning about strcasecmp not found in -std=c99/cmake build 2016-01-13 Even Rouault * Upgrade to EPSG database v8.8 2016-01-11 Even Rouault * geo_normalize.c: remove dead code (KS CID 138299) 2016-01-08 Even Rouault * libgeotiff: fix likely false-positive null-ptr use (KS CID 138459), remove useless null ptr chec(KS CID 138299), add dummy checks for return value of GTIFKeyGetDOUBLE() (KS CID 138174), leak in error code path (KS CID 138952) 2016-01-07 Even Rouault *geo_print.c: a bit refactoring to avoid false positive warning from Coverity Scan about cast of negative value 2015-12-30 Even Rouault * ReadKey(): discard double key with invalid offset/count to prevent out-of-bounds read in GTIFKeyGet() 2015-12-21 Even Rouault *geo_simpletags.c: avoid Clang Static Analyzer warnings about potential malloc(0) 2015-12-20 Even Rouault * geo_print.c: comment out dead assignment with explicit FIXME 2015-12-20 Even Rouault * geo_write.c: fix mostly false positive warnings reported by clang static analyzer, except a missed check on return of _GTIFcalloc() 2015-12-06 Even Rouault * Constify static arrays 2015-11-26 Even Rouault * Remove leading double underscores in header inclusion guards 2015-11-22 Even Rouault * Fix typos in comments (patch by Kurt Schwehr) 2015-11-22 Even Rouault * ReadKey(): fix MSVC warning for TYPE_SHORT and count > 1 (although this is completely untested) 2015-11-18 Even Rouault * Fix clang -Wshorten-64-to-32 warnings 2015-11-18 Even Rouault * Fix MSVC warnings 2015-11-02 Even Rouault * GTIFGetPCSInfo(): correctly assign KvUserDefined to *pnProjOp in case of failure (reported by Clang static analyzer) 2015-10-28 Even Rouault * Fixes to suppress ''no previous declaration/prototype' warnings 2015-10-17 Even Rouault * geo_normalize.c: use M_PI when available 2015-10-17 Even Rouault * Fix -Wshadow warnings 2015-09-30 Even Rouault * configure.ac: prepend JPEG library directory to LIBS (#71) 2015-09-29 Even Rouault * Fix warning about unknown symbol _GTIFFree 2015-09-29 Even Rouault * Free cdata on error in TYPE_ASCII. (GDAL CID 138951, patch by Kurt Schwehr) 2015-05-02 Even Rouault * GTIFGetProj4Defn(): add case to deal with CT_HotineObliqueMercatorAzimuthCenter (except RSO variant that will need further fix) 2015-04-01 Even Rouault * geotiff_proj4.c: use CPLStrdup() instead of strdup() to avoid issues with newer MSVC versions (GDAL #5907) 2015-03-01 Even Rouault * csv/build_pcs.py, csv/csv_tools.py, csv/add_esri_column.py, csv/pg_to_csv.py: add Python3 compatibility and pyflakes fixes 2015-03-01 Even Rouault * csv/build_pcs.py: when converting rotational values for TOWGS84 clause from other units into arc-seconds, do not output them with too big accuracy. * csv/datum_shift.csv, csv/gcs.csv: regenerated with above change. 2015-02-07 Even Rouault * libgeotiff/geo_new.c, libgeotiff/geo_write.c, libgeotiff/geo_print.c: Fix warnings about strict-aliasing issues 2014-12-27 Even Rouault * libgeotiff/geo_normalize.c: GTIFGetDefn(): deal with Polyconic and Equirectangular when reading PCS code only 2014-12-27 Even Rouault * libgeotiff/geotiff_proj4.c: handle (as better as we can without a proper CT_ constant) Mercator 2SP (#72) 2014-12-27 Even Rouault * libgeotiff/geo_normalize.c: GTIFGetDefn(): fix for handling Mercator_2SP when reading PCS code only (#72) 2014-12-27 Even Rouault * libgeotiff/cpl_serv.c, libgeotiff/geo_normalize.c: GTIFGetDefn(): issue a CE_Warning if .csv files cannot be found (GDAL #956) 2014-12-27 Even Rouault * libgeotiff/geo_normalize.c: GTIFGetDefn(): fix decoding of Polar Stereographic Variant B (EPSG 9829) (GDAL #3220) 2014-12-25 Even Rouault * libgeotiff/geo_new.c, libgeotiff/geo_print.c, libgeotiff/geo_set.c: Upstream compiler warnings fixes of libgeotiff from GDAL (http://trac.osgeo.org/gdal/changeset/27745, GDAL #5414) 2014-12-23 Even Rouault * libgeotiff/geo_normalize.c: GTIFGetDefn(): secure calls to GTIFKeyGet() by checking that the type of the stored key matches the expected type 2014-12-23 Even Rouault * listgeo: fix/workaround a crash on a corrupted image generated by afl 2014-09-13 Howard Butler * CMake: Fix up SONAME and VERSION to better match configure.ac 2014-09-16 Frank Warmerdam * csv/datum_shift_pref.csv: revert change in preferred datum shift for Pulkovo 1942(58) related to ticket #1851 - not appropriate. 2014-09-13 Frank Warmerdam * Preparing 1.4.1 release. * csv/datum_shift_pref.csv: Update Pulkova 1942(58) to use a particular transformation (#52). * bin/geotifcp.c: added B, L, C and M flags from tiffcp (#68)" * geo_print.c: clarify that the buffer passed to read methods is only guaranteed to be 1024 bytes long (#62). 2014-09-13 Howard Butler * CMake: Support for INCODE build. If you need INCODE support, with the definitions compiled into headers, use CMake as your configuration/build platform. 2014-09-13 Frank Warmerdam * csv: Override three Brazilian datum shifts on behalf of Daniel Miranda and the OSGeo Brazilian Chapter. 2014-09-13 Howard Butler * csv: Upgrade to EPSG 8.5 2014-07-30 Howard Butler * INCODE: Adapt Ben Adler's patch in #66 to add INCODE support to the CMake configuration 2014-07-30 Howard Butler * geo_normalize.c: #59, better Mercator_2SP support 2014-07-30 Howard Butler * geotifcp: Do not segfault when a TIFF file has WhitePoint set #65 2014-07-30 Howard Butler * geo_names.c: fix #67 -- add VerticalUnitsGeoKey 2014-05-16 Even Roualt * add_esri_column.py: manually replace D_SIRGAS-Chile by D_Peru96 for GCS_Peru96. Likely an error in the FileGDB SDK db (#63) 2014-05-14 Even Roualt * csv: Upgrade to EPSG 8.4 2013-05-08 Frank Warmerdam * tiffcp: Add bigtiff output support with the -8 flag like tiffcp. Contributed by Mohannad Al-Durgham (nwgeo.com). 2013-10-01 Frank Warmerdam * csv: Upgrade to EPSG 8.2 2013-01-31 Frank Warmerdam * csv/datum_shift_pref.csv: Force OSGB 1936 preferred datum shift. (http://trac.osgeo.org/gdal/ticket/4597) 2012-12-05 Frank Warmerdam * csv: Upgrade to EPSG 8.0 2012-10-17 Frank Warmerdam * geo_normalize.c: GTIFGetEllipsoidInfo() - do not assume that CSVFilename()'s return result is long lived. Caused errors looking up ellipsoid 7007 when uom lookup altered name buffer in GDAL context. 2012-10-12 Frank Warmerdam * configure.ac, geotiff.h: update for 1.4.1 version even though we aren't releasing right now. * cmake/COPYING-CMAKE-SCRIPTS, LICENSE: Add note on BSD licensed cmake macros. 2012-10-08 Frank Warmerdam * geo_normalize.c/geo_normalize.h: Add support for disabling the TOWGS84 parameter support if GEO_NORMALIZE_DISABLE_TOWGS84 is defined. This is primary intended to maintain binary compatability of the GTIFDefn structure with older versions (for MrSID compat for instance). No configure support - you need to manually incorporate into geo_config.h or perhaps geo_normalize.h. (gdal #3309) * geo_normalize.c/geo_normalize.h: Add GTIFAllocDefn() and GTIFFreeDefn() functions for allocation/free of GTIF structure in a more version independent way. (gdal #3309) 2012-05-15 Frank Warmerdam * geo_normalize.c: for now treat method 9829 (Polar Stereographic Variant B) the same as 9810 - as CT_PolarStereographic. 2012-05-08 Frank Warmerdam * geo_ctrans.inc, geo_normalize.c: Add CT_HotineObliqueMercatorAzimuthCenter. 2012-05-06 Frank Warmerdam * geo_normalize.c: Correct GTIFGetDefn() so that user defined linear units are properly read. Add user defined linear units to definition report. (#51) 2012-03-29 Frank Warmerdam * Another crack at a 1.4.0 release. 2011-10-06 Frank Warmerdam * Add some missing csv files in svn, fix Makefile.am (#46) 2011-09-28 Frank Warmerdam * Makefile.am: add various missing csv/*.csv files to dist list. 2011-09-17 Frank Warmerdam * csv/*.csv: Upgrade to EPSG 7.9. 2011-06-15 Frank Warmerdam * LICENSE: updated to latest EPSG terms of use details which clarify commercial use allowed. 2011-05-23 Frank Warmerdam * geo_normalize.c: Treat 1027 as equivelent to 9820 (LAEA) http://trac.osgeo.org/gdal/ticket/3828 * csv/pcs.override.csv: Fix to include coord_sys_code field to match pcs.csv and fixes serious issue with EPSG:26799. * Prepare libgeotiff 1.4.0 release. * Makefile.am: Do not distribute geo_config.h - it should be generated. * bin/csv2html.c: Removed (#6) * csv/datum_shift_pref.csv: update Belge 1972 preferred datum shift(#32) * man: add listgeo man page (#1) * Makefile.am (SUBDIRS): * csv/*.csv: Upgrade to EPSG 7.6 database. 2011-05-10 Frank Warmerdam * geo_normalize.c: Add support for cylindrical equal area from EPSG (http://trac.osgeo.org/gdal/ticket/4068) 2011-05-06 Frank Warmerdam * geo_normalize.c: Fix so that false easting/northing values read from a files geokeys are correctly normalized into meters in the GTIFDefn structure. http://trac.osgeo.org/gdal/ticket/3901 2011-04-11 Frank Warmerdam * geo_normalize.c: fix false easting/northing fetching from epsg for oblique mercator (EPSG:9812) (#38). 2011-03-22 Frank Warmerdam * geo_print.c: ensure there is a space between numbers to avoid them flowing into each other and being unparsable (#36, #37). 2011-03-09 Frank Warmerdam * geokeys.h, geo_normalize.c, geo_normalize.h: Add GeogTOWGS84GeoKey support as an extension to the official specification. 2011-02-24 Frank Warmerdam * geo_strtod.c, geo_normalize.c: Provide a locale-safe implementation of atof() and use it when parsing values from .csv files. http://trac.osgeo.org/gdal/ticket/3979 2011-02-11 Frank Warmerdam * geotiff_proj4.c, geo_normalize.c: fix a few warnings for type casts, and uninitialized variables. 2011-01-28 Frank Warmerdam * cpl_serv.h: Adjust EQUALN to avoid warnings on modern MSVC compiles. 2010-10-05 Frank Warmerdam * geo_new.c, geo_simpletags.c: Fix simple tags so it includes the '\0' char at the end of strings just like a real tiff. Modify geo_new.c so we only drop the trailing '\0' char if that is what it really is. All loosely related to: http://trac.liblas.org/ticket/188 2010-09-21 Frank Warmerdam * configure.ac, geotiff_proj4.c: Avoid use of projects.h. (GDAL #3761) 2010-05-28 Frank Warmerdam * bin/Makefile.am: add getopt.c to distribution. * Makefile.am: ensure geo_config.h.vc is distributed. 2010-05-09 Frank Warmerdam * geo_new.c: Avoid memory overrun if more than MAX_VALUES geokeys are encountered (#27). * configure.ac: fix --with-libz and --with-zlib aliases (#23) 2010-02-12 Frank Warmerdam * csv/stateplane.csv: Fix califoria VII and added Kentuky Single Zone. http://trac.osgeo.org/gdal/ticket/3408 2010-01-12 Frank Warmerdam * Preparing 1.3.0 release. * csv/*.c, cpl_csv_incode.c, geo_incode_defs.h, Makefile.am: rename defs.h to geo_incode_defs.h and include it in distribution so incode table support will work out of the box. 2010-01-07 Frank Warmerdam * geo_names.c: ensure that VerticalUnitsGeoKey works properly. * geo_write.c: switch SortKeys() to a simple bubble sort so we don't end up crashing when rewriting screwn geotiff tag sets with duplicate geokeys (like some LAS files with multiple zero dummy tags) * geo_new.c: resize short and double arrays bigger when reading from an existing file to ensure we can update and add keys later. 2010-01-03 Frank Warmerdam * Makefile.am: set versioninfo to 2:0:0 as required by the change for 1.3.0 in the ABI due to change of size of GTIFDefn structure. (#19, GDAL #3309) 2009-12-30 Frank Warmerdam * geo_new.c: fix computation of ascii key length introduced in past fix a few months ago that was breaking the GTIFImport() logic. (#14) 2009-11-11 Frank Warmerdam * geo_normalize.c: Recognise 9841 and 1024 projection methods as CT_Mercator: http://trac.osgeo.org/gdal/ticket/3217 2009-10-19 Frank Warmerdam * csv/{gcs,pcs}.override.csv: Add comments on where the master lives and incorporate COORD_SYS_CODE and Pulkovo 1942 GCS. 2009-09-24 Frank Warmerdam * geotiff_proj4.c: fix parameter mapping to proj4. for equirectangular per http://trac.osgeo.org/gdal/ticket/2706 * autogen.sh: adjust to avoid version conflicts (#10). * geo_normalize.c/h, geotiff_proj4.c: Added DefnSet to GTIFDefn so it can be properly established if a definition was set or if there were no geokeys (#12). Corrects serious interim bug in geotiff_proj4.c * geo_new.c: avoid buffer overrun on corrupt input file (#14). * geo_print.c: Improve the precision when formatting values (#13). 2009-06-05 Paul Ramsey * csv: Update the EPSG csv files to the 7.1 release of the database. 2009-06-03 Frank Warmerdam * geo_normalize.c: add support for LAEA, as contributed by EvenR. http://trac.osgeo.org/gdal/ticket/3016 2009-05-20 Frank Warmerdam * csv/add_esri_column.py, csv/esri_datum_override.csv: Added a bunch of manual ESRI datum name overrides - related to GDAL r17058. 2009-05-18 Frank Warmerdam * COPYING: remove inadvertent GPL license, refer to LICENSE file. 2009-05-03 Frank Warmerdam * geo_print.c: Use %s format string in fprintf for arbitrary messages. http://trac.osgeo.org/gdal/ticket/2976 2009-04-22 Frank Warmerdam * geo_normalizec: Do not call CSVDeaccess() by default in getdefn - leave it to the application. * Remove all the $Log logs. 2009-04-03 Frank Warmerdam * geotiff_proj4.c: fix case for setting LCC 2SP GeoTIFF from proj.4. 2009-02-23 Frank Warmerdam * *.c, *.h: Include appropriate copyright messages where missing (#8). * geotiff_proj4.c: Fix some buffer overflow holes (#9). 2009-02-18 Frank Warmerdam * geo_simpletags.c: compute "count" for ascii tag values. 2008-12-29 Frank Warmerdam * geo_normalize.c: Optimizations to avoid opening CSV files for "well known" definitions. (#4). * geotiff_proj4.c: Reduce change of szUnits overflow (#3). 2008-11-27 Frank Warmerdam * geo_normalize.c: Introduce support for StdParallel1 in Equirectangular (http://trac.osgeo.org/gdal/ticket/2706) 2008-11-12 Frank Warmerdam * bin/applygeo.c: New utility for applying georeferencing to an existing file (written by jeskynar@hotmail.com and myself). 2008-10-24 Frank Warmerdam * bin/listgeo.c: Improve tfw error reporting and user hints (#2) 2008-07-21 Frank Warmerdam * Prepare 1.2.5 release. * csv/*.csv: upgraded to EPSG 6.17. 2008-07-03 Frank Warmerdam * geo_normalize.c: Fix potential buffer overflow in GTIFAngleStringToDD http://trac.osgeo.org/gdal/ticket/2228 2008-05-21 Frank Warmerdam * bin/geotifcp.c: Support for -4 option to set from proj.4 def. * geotiff_proj4.c: Preliminary proj4->geotiff function, quite incomplete 2008-05-09 Frank Warmerdam * geo_simpletags.{c,h}, geo_new.c, geotiff.h: Introduce "simple tags" API for parsing geotiff tags that don't come via libtiff. Mostly for use of liblas. 2008-01-31 Frank Warmerdam * geo_normalize.c: Ignore GCS values less than 1 as seen in the ENVI generated file reported in: http://trac.osgeo.org/gdal/ticket/2183 2007-12-11 Frank Warmerdam * geo_normalize.c: Add EPSG 9822 (Albers Equal Area) support from EPSG 2007-10-02 Frank Warmerdam * geo_new.c: avoid memory leak in case of error. 2007-07-28 Frank Warmerdam * Issue libgeotiff 1.2.4 release. * geo_normalize.c: Fix name for GCS_WGS_72 per gdal bug #1715. 2007-07-20 Frank Warmerdam * csv/*.csv,*.c: Upgrade to EPSG 6.13. Avoid applying pcs.override.csv and gcs.override.csv to pcs.csv and gcs.csv as this sort of dataset change is discouraged by the EPSG folks. * geo_normalize.c: Pre-search pcs.override.csv and gcs.override.csv. * cpl_csv_incode.c: Handle unexpected .csv files, and missing records more gracefully. 2007-06-05 Frank Warmerdam * Modified GTIFGetUOMLengthInfo() (for normalization) to have built in known values for foot and us survey foot. 2007-03-13 Frank Warmerdam * geotiff_proj4.c, geo_normalize.c: Added support for new zealand map grid per http://bugzilla.remotesensing.org/show_bug.cgi?id=1519 2007-02-04 Frank Warmerdam * Makefile.in: Fix Progs dependency so parallel makes work properly. http://bugzilla.remotesensing.org/show_bug.cgi?id=1475 2006-12-18 Frank Warmerdam * bin/listgeo.c: Don't report hemispheres *and* signs when using -d. 2006-11-11 Frank Warmerdam * xtiff.c, xtiffio.h: Made XTIFFInitialize() public so that applications can call it themselves when using alternate opens. http://bugzilla.remotesensing.org/show_bug.cgi?id=1296 2006-10-18 Frank Warmerdam * Upgraded csv files to EPSG 6.11.1. 2006-10-13 Frank Warmerdam * Makefile.in: Avoid running configure or autoconf automatically. It is nothing but heartache. 2006-07-20 Frank Warmerdam * bin/Makefile.in: Fix prefix handling. http://bugzilla.remotesensing.org/show_bug.cgi?id=1245 2006-06-26 Frank Warmerdam * geo_new.c: If the ascii parameters list is too short for the declared size of an ascii parameter, but it doesn't start off the end of the available string then just trim the length. This is to make the ESRI sample data file 34105h2.tif work properly. I wish we had a way of issuing warnings! ============================================================================== 2006-03-02 Frank Warmerdam * Issuing libgeotif 1.2.3 release. 2005-08-16 Frank Warmerdam * Makefile.in: Include @C_PIC@ in CFLAGS so -fPIC will be used. 2005-03-15 Frank Warmerdam * geo_normalize.c: If a zero inverse flattening is encountered, interprete this as implying a semiminor axis equal to the semimajor. 2005-03-03 Frank Warmerdam * geotiff_proj4.c: added CT_CylindricalEqualArea support. * geo_normalize.c: Added CT_CylindricalEqualArea support. * geo_ctrans.c: added CT_CyldricalEqualArea. 2005-02-16 Frank Warmerdam * geo_normalize.c: check for ProjFalseOriginEastingGeoKey and ProjFalseOriginNorthingGeoKey in GTIFFetchProjParms(). Otherwise we miss the false easting/northing for LCC2SP when reading with normalization. 2004-12-16 Frank Warmerdam * aclocal.m4, Makefile.in: added MacOSX/Darwin related logic for shared libraries. * bin/Makefile.in: fixed problem in setting libdir. 2004-12-01 Frank Warmerdam * geo_normalize.c: GTIFGetGCSInfo() changed to work even if an illegal PM code encountered ... as long as pm info not requested. http://bugzilla.remotesensing.org/show_bug.cgi?id=698 2004-11-21 Frank Warmerdam * configure.in: bug 649 - add LDFLAGS into LIBS, and ensure we can link against libproj.so even if no libproj.a is provided. 2004-10-19 Frank Warmerdam * geo_print.c: fixed serious bug with reporting large numbers of GCPs. Patch from Oliver Colin (ESA). 2004-07-09 Frank Warmerdam * geo_normalize.c: added 9122 as a simple degree alias in GTIFGetUOMAngleInfo(). 2004-06-07 Frank Warmerdam * geo_normalize.c: fallback to using gdal_datum.csv if datum.csv not found. ============================================================================== 2004-04-30 Frank Warmerdam * Prepare 1.2.2 release. 2004-04-29 Frank Warmerdam * xtiffio.h: Avoid including cpl_serv.h, moved to geo_tiffp.h so that only libgeotiff code will end up seeing cpl_serv defines. 2004-04-27 Frank Warmerdam * geo_new.c, geo_write.c, geo_print.c: Make it possible to create a GTIF information object *without* an associated TIFF *. 2004-03-23 Frank Warmerdam * cpl_csv_incode.c: include dummy version on CPLReadParseLine(). * Reconvert the EPSG 6.5 files to C. * Wrote csv/csv2c.py for converting .csv file to .c. * Capture EPSG 6.5 csv files. 2003-10-21 Frank Warmerdam * geo_print.c: fixed bug with long message text with embedded newlines which happen to straddle the end of the message buffer when expanded with escape characters. (as reported by Leica - not in bugzilla). 2003-09-23 Frank Warmerdam * geo_print.c: fixed PrintKey() to work for constant names longer than the message buffer. http://bugzilla.remotesensing.org/show_bug.cgi?id=399 2003-09-02 Frank Warmerdam * geo_new.c: various hacks so that with improperly terminated ascii parameters such as "34737 (0x87b1) ASCII (2) 9" will still work. eg. 1164-0.tif 2003-07-08 Frank Warmerdam * geo_normalize.c, geo_print.c, geo_set.c, geo_tiffp.c, geo_trans.c, geo_write.c, geotiff_proj4.c: fix various warnings. ============================================================================== 2003-06-20 Frank Warmerdam * bin/Makefile.in: Removed the "prep" target for copying the geotiff shared library ... not necessary with -L.. (I hope). * configure.in: don't let -ltiff get added to LIBS multiple times. * Prepared 1.2.1 release 2003-06-19 Frank Warmerdam * geo_new.c: Fixed bug that can corrupt memory when an invalid GeoTIFF file with a zero length ascii parms strings is read (like bruce.tif). 2003-06-03 Frank Warmerdam * bin/Makefile: added -L${libdir} before $(LIBS) per suggestion by Tommy Andreassen. 2003-02-25 Frank Warmerdam * bin/Makefile.in: Replace $< with the object file names. Apparently this makes the makefile be compatible with Sun's make. 2003-01-28 Frank Warmerdam * geo_normalize.c: Default dfInDegrees in GTIFAngleToDD(). 2003-01-26 Frank Warmerdam * bin/geotifcp.c: fixed bug if the metadata file specified does not exist. http://bugzilla.remotesensing.org/show_bug.cgi?id=258 2003-01-20 Frank Warmerdam * cpl_csv_incode.c: fixed bug CSVGetField() which could cause a crash if a missing record was requested. * cpl_csv_incode.c, Makefile.in, csv/*: Reincorporated "incode" support as per patches from Derrick. * cpl_serv.h: added #define for gtGetFileFieldId. * cpl_csv.c: changed CSVFilename() to search for pcs.csv, not horiz_cs.csv. 2003-01-19 Frank Warmerdam * Makefile.in, bin/Makefile.in: added dist-clean target. ============================================================================== 2003-01-15 Frank Warmerdam * Preparing 1.2.0 libgeotiff release. * removed libtiff_private contents. * geotiff.h: added LIBGEOTIFF_VERSION macro. * geo_normalize.c/h: Added GTIFFreeMemory() for freeing memory allocated by GTIF CSV lookup functions. Added GTIFDeaccessCSV() call for applications to force all CSV files to be de-cached. * cpl_serv.h: renamed lots of CPL functions with gt prefixes using macros. 2003-01-07 Frank Warmerdam * configure.in: fixed some stuff with last changes. The --with-libtiff option can now be used to give a base directory with libtiff installed into /include and /lib directories under that. 2003-01-02 Frank Warmerdam * configure.in: Remove logic to insert /usr/local/ in include and lib path. Remove configure switch for in-code EPSG tables since that option is broken for now. 2002-12-01 Frank Warmerdam * cpl_csv.c: rewritten to support in memory caching of tables, and fast searches. * geo_extra.c: tweaked to favor fixed EPSG codes for Kentucky North (NAD83), and Tennesse (NAD27). The original entries have incorrect values. Also modified epsg_pcs.inc and epsg_proj.inc. * geo_normalize.c: Major restructuring to use EPSG 6.2.2 database. 2002-11-23 Frank Warmerdam * geo_free.c: don't read past end of keys list. Introduced by changes from Rainer. * geo_new.c: fix memory leak of tempData.tk_asciiParams. Introduced by changes from Rainer. 2002-09-27 Frank Warmerdam * libxtiff/{xtiff.c,xtiffio.h}: Added XTIFFClientOpen() function as per supplied implementation from John Novak. http://bugzilla.remotesensing.org/show_bug.cgi?id=204 * geo_free.c, geo_names.c, geo_keyp.h, geo_new.c, geo_set.c, geo_write.c: Rainer Wiesenfarth (wiesi at ngi dot de) submitted patches to support deletion, and changes to ascii tags. To accomplish this the ASCII tags are now allocated dynamically. The GTIFF_ASCIIPARAMS are split up when read, and recombined when written. 2002-09-21 Frank Warmerdam * geo_names.c: added support for VerticalUnitsGeoKey as per bug 203. 2002-07-19 Frank Warmerdam * bin/listgeo.c: Added -d (report corners in decimal degrees) flag to listgeo as submitted by Derrick Brashear. 2002-07-09 Frank Warmerdam * geotiff_proj4.c: Fixed translation of polar stereographic to PROJ.4 as per http://bugzilla.remotesensing.org/show_bug.cgi?id=172. 2002-06-18 Frank Warmerdam * cpl_csv.h, cpl_serv.h, cpl_csv.c, cpl_csv_incode.c, geo_normalize.c: Removed the cpl_csv.h file, and merged it into cpl_serv.h. Modified all modules including cpl_csv.h to include cpl_serv.h instead. This is to avoid a conflict with the cpl_csv.h in GDAL. 2002-05-31 Frank Warmerdam * geo_print.c: modified to using backslash escaping for backslashes, and newlines handle newlines in citations (as occur in Erdas generated files, for instance). Also resolved some problems with processing long string values though very long strings will still blow up GTIFImport(). http://bugzilla.remotesensing.org/show_bug.cgi?id=139 2002-02-25 Frank Warmerdam * configure.in: added setting of EXEEXT macro - allow .exe files on Cygwin. * libxtiff/xtiff.c: Rewrote to use new "custom field" interface to libtiff (requires libtiff 3.6.x). Removed xtiffiop.h. No longer a dependence on private libtiff include files. 2002-02-12 Frank Warmerdam * configure.in, Makefile.in, bin/Makefile.in: extensive updates to support building libgeotiff as a DLL on Cygwin. 2002-02-11 Frank Warmerdam * Added CSVDeaccess() stub ... submitted by Derrick Brashear. * README: Fixed url. 2002-02-04 Frank Warmerdam * configure.in: fixed up zip/jpeg arg so that --with-jpeg will work as reported by Julien Demaria. 2002-01-03 Frank Warmerdam * Prepare 1.1.5 release. * geo_normalize.c: call CSVDeaccess() at end of GTIFPrintDefn() so that listgeo has closed all file handles by the end. 2001-11-28 Frank Warmerdam * geo_trans.c: fixed memory leak of transform in GTIFPCSToImage() as reported by Ng Lay Keow (Nicole). 2001-07-09 Frank Warmerdam * cpl_serv.c: Another bug with pszRLBuffer being freed but not set to NULL. 2001-06-28 Frank Warmerdam * cpl_csv_incode.c: Use EQUAL instead of strcasecmp() to ensure code builds on windows. As per http://bugzilla.remotesensing.org/show_bug.cgi?id=59 2001-05-02 Frank Warmerdam * geo_set.c: modified so that a count of -1 means to delete the tag from the list. 2001-04-17 Frank Warmerdam * geo_normalize.c: fixed memory leaks in GTIFGetDefn(). * cpl_serv.c: Fixed failure to set pointer to NULL when freeing line buffer in CPLReadLine(). * geo_normalize.c: added support for reading custom ellipsoid definitions. http://bugzilla.remotesensing.org/show_bug.cgi?id=42 2001-04-06 Frank Warmerdam * listgeo.c: added -i flag to report inverse transformation results, testing the PCSToImage() function. Not documented for user though. * GTIFPCSToImage(): added support for inverting matrix transformations. * Fixed GTIFGetDefn() to support custom ellipsoid definition. 2001-03-04 Frank Warmerdam Fixed various memory leaks bugs thanks to Alan Gray. * GTIFGetDefn() now calls CSVDeaccess() to avoid memory/file leaks. * Added docs/api, and related for Doxygen generated API docs. * Fixed memory leaks in GTIFPrintDefn() (geo_normalize.c), and GTIFImageToPCS(), GTIFPCSToImage() (geo_trans.c). 2001-03-01 Frank Warmerdam * Added PCS_GGRS87_Greek_Grid for Dr. Irwin Scollar. 2001-02-28 Frank Warmerdam * Added PCS_HD72_EOV to epsg_pcs.inc, and added GCS_GGRS87 to epsg_gcs.inc at the request of Prof. Dr. Irwin Scollar. 2001-02-23 Frank Warmerdam * Fixed GTIFPrintDefn() to use fprintf( fp ), instead of printf(), as per fixes from Alan Gray. 2001-01-19 Frank Warmerdam * Added tiffconf.h to libtiff_private. Secretly reissue 1.1.4 source release. 2001-01-17 Frank Warmerdam * Prepare 1.1.4 final release. * Added README_BIN, and mkbindist.sh. * Modified csv search code to include a search of share/epsg_csv and /usr/share/epsg_csv 2001-01-02 Frank Warmerdam * Added support for .tfw files with rotatational coefficents in geotifcp.c. * Updated README.WIN to mention VCVARS32.BAT. 2000-12-28 Frank Warmerdam * Prepare 1.1.4beta release. * Added HOWTO-RELEASE file. * Removed getopt.h from geotifcp.c to build on windows. 2000-12-12 Frank Warmerdam * Fix geotifcp.c to avoid u_char problems, include getopt.h. * Made configure use "-L... -llibname" for libproj and libtiff so we will use the shared library when possible. * Fixed up Makefile.in so it works if . is not in the path. * Added CSV_DATA_DIR define to control where to look for csv files. Todays fixes courtesy of Dave Johnson, ddj@cascv.brown.edu and are summarized in: http://bugzilla.remotesensing.org/show_bug.cgi?id=29 2000-12-05 Frank Warmerdam * Added cassini support in geotiff_proj4.c. * modified geotiff_proj4.c to use +R_A to use spherical radius of equal area, similar to other systems like GCTP for the Miller Cylindrical and VanDerGrinten. Should also do for any other spherical projections as identified. 2000-11-30 Frank Warmerdam * Fixed Makefile.in to install all the .inc files with the include files. 2000-11-24 Frank Warmerdam * Added configure/makefile logic to build a shared library, currently libgeotiff.so.1.1.5, and intall it with appropriate links. * Modified configure to use --with-libtiff, and to ignore TIFF_HOME. Now it is preferred to use an installed libtiff instead of one sitting in a build directory. * Added libtiff_private directory with required libtiff include files, to make it easier to build libgeotiff if only the standard libtiff development environment was installed. 2000-11-23 Frank Warmerdam * Based loosely on suggestions from Curt Mills, I have reworked the configure.in logic for PROJ.4. I add -I/usr/local/include to CFLAGS and -L/usr/local/lib to LIBS right off the start so /usr/local is included in the default search path. The user no longer specifies the PROJ_HOME environment variable, and instead uses the --with-proj configure switch. Updated notes for building PROJ_HOME set in README. 2000-10-13 Frank Warmerdam * Added EquidistantConic support in PROJ.4 translation. * Fixed order of parameters for LCC when read directly from a file to match that when read from EPSG tables. This is now always: 0-NatOriginLat, 1-NatOriginLong, 2-StdParallel1, 3-StdParallel2 This change is only in geo_normalize.c. 2000-09-29 Frank Warmerdam * Fixed bug in CPLReadLine() that primarily affects windows, and SunOS 4.x. Bug fix courtesy of shumilin@scanex.ru. 2000-09-15 Frank Warmerdam * Added the -proj4 option to listgeo to report it's selected PROJ.4 string. * Fixed order of parameters for LCC 2SP. When parameters were read from EPSG CSV files the standard parallels and origin were mixed up. This affects alot of state plane zones! ============================================================================== 2000-08-22 Frank Warmerdam * Prepare 1.1.3 release. * Added install target to makefile. Defaults to /usr/local/... * Added libjpeg to configure, and fixed up libjpeg/libz ordering. 2000-08-21 Frank Warmerdam * Removed the GTIFTiepointTranslate() code because it it badly broken. 2000-06-09 * Added knowledge of NAD27, NAD83, WGS72, WGS84, their datums, and ellipsoids. 2000-05-21 Frank Warmerdam * Added -e option to geotifcp to intialize tiepoint+pixelscale based on an ESRI world file. ============================================================================== Sun Feb 20 16:43:03 2000 Frank Warmerdam * Prepare 1.1.2 release. Tue Jan 4 10:59:48 2000 Frank Warmerdam * Fixed inclusion of geoparms in object file list at Derricks suggestion. * Added --with-zip support to configure and makefiles at the suggestion of Derrick Brashear. Fri Dec 10 13:24:21 1999 Frank Warmerdam * Upgraded .csv and .c files to EPSG 4.4. * Fixed bug setting the false northing for files with ProjCenterNorthingGeoKey set in GTIFGetDefn(). * Added "--with-incode-epsg" support to configure, added cpl_csv_incode.c and csv/*.c tables. Wed Sep 29 10:10:39 1999 Frank Warmerdam * Upgraded CSV files to EPSG 4.3 from EPSG 4.2. Fri Sep 17 10:53:52 1999 Frank Warmerdam * Added ProjRectifiedGridAngleGeoKey(3096) and support for it's use with Oblique Mercator in geo_normalize.c. Thu Sep 16 17:22:55 1999 Frank Warmerdam * Added support for pure tiepoints, and the transformation matrix in GTIFImageToPCS(), and GTIFPCSToImage(). Wed Sep 15 10:19:34 1999 Frank Warmerdam * CT_TransvMercator_SouthOriented now CT_TransvMercator_SouthOrientated to match EPSG. SouthOriented name remains as an alias. * Fixed serious bug in geo_normalize.c with translation of DD.MMSSsss values. Return value was seriously off if any fraction of a second was included in the string. Tue Sep 7 15:57:47 1999 Frank Warmerdam * Fixed count/tiepoint_count mixup in GTIFPCSToImage(). Thanks to Eric Brown of Universal Systems. Mon Jul 12 12:56:51 1999 Frank Warmerdam * Made scale a parameter of CT_Stereographic. * geotifcp modified to copy existing geotiff information by default. ============================================================================== Tue May 4 09:25:12 1999 Frank Warmerdam * Prepared Version 1.1.1 release. Mon May 3 14:10:30 1999 Frank Warmerdam * Added corner coordinate reporting to listgeo, and made full report the default. * Added geo_trans.c with image<->PCS transformations. * Fixed serious bug with parsing DMSmmsss.ss coordinates from CSV files which could make many results wrong. * Cleaned up warnings with gcc -Wall, and IRIX native compiler. * Added support for -Wall for GCC in when running configure. This also resulted in the addition of aclocal.m4 to the dist. Wed Apr 28 14:12:25 1999 Frank Warmerdam * Added geo_extra.c, for special handling of UTM and state plane map systems. * Changed to have api help inline with the code, and extracted with doxygen. Thu Mar 25 23:25:22 1999 Frank Warmerdam * Added ChangeLog and LICENSE file to distribution. March 18 * Added support for PROJ.4 in configure. Added cover functions for Proj.4 in geotiff_proj.c, added lat/long reporting to listgeo.c. ============================================================================== -- 1.1.0a Release (circa March 10, 1999) -- * This release is considered alpha (not release) quality. * Includes new CSV files, ``geo_normalize'' support, and a new configure script (using autoconf). -- 1.02 Release (1995 or so) libgeotiff-1.7.4/geo_normalize.c0000664000175000017500000033522314632634101013566 00000000000000/****************************************************************************** * $Id$ * * Project: libgeotiff * Purpose: Code to normalize PCS and other composite codes in a GeoTIFF file. * Author: Frank Warmerdam, warmerdam@pobox.com * ****************************************************************************** * Copyright (c) 1999, Frank Warmerdam * Copyright (c) 2018, Even Rouault * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. *****************************************************************************/ #include #include #include #include #include "cpl_serv.h" #include "geo_tiffp.h" #include "geovalues.h" #include "geo_normalize.h" #include "geo_keyp.h" #include "proj.h" #ifndef KvUserDefined # define KvUserDefined 32767 #endif #ifndef M_PI # define M_PI 3.14159265358979323846 #endif /* EPSG Codes for projection parameters. Unfortunately, these bear no relationship to the GeoTIFF codes even though the names are so similar. */ #define EPSGNatOriginLat 8801 #define EPSGNatOriginLong 8802 #define EPSGNatOriginScaleFactor 8805 #define EPSGFalseEasting 8806 #define EPSGFalseNorthing 8807 #define EPSGProjCenterLat 8811 #define EPSGProjCenterLong 8812 #define EPSGAzimuth 8813 #define EPSGAngleRectifiedToSkewedGrid 8814 #define EPSGInitialLineScaleFactor 8815 #define EPSGProjCenterEasting 8816 #define EPSGProjCenterNorthing 8817 #define EPSGPseudoStdParallelLat 8818 #define EPSGPseudoStdParallelScaleFactor 8819 #define EPSGFalseOriginLat 8821 #define EPSGFalseOriginLong 8822 #define EPSGStdParallel1Lat 8823 #define EPSGStdParallel2Lat 8824 #define EPSGFalseOriginEasting 8826 #define EPSGFalseOriginNorthing 8827 #define EPSGSphericalOriginLat 8828 #define EPSGSphericalOriginLong 8829 #define EPSGInitialLongitude 8830 #define EPSGZoneWidth 8831 #define EPSGLatOfStdParallel 8832 #define EPSGOriginLong 8833 #define EPSGTopocentricOriginLat 8834 #define EPSGTopocentricOriginLong 8835 #define EPSGTopocentricOriginHeight 8836 #define CT_Ext_Mercator_2SP -CT_Mercator #ifndef CPL_INLINE # if (defined(__GNUC__) && !defined(__NO_INLINE__)) || defined(_MSC_VER) # define HAS_CPL_INLINE 1 # define CPL_INLINE __inline # elif defined(__SUNPRO_CC) # define HAS_CPL_INLINE 1 # define CPL_INLINE inline # else # define CPL_INLINE # endif #endif #ifndef CPL_UNUSED #if defined(__GNUC__) && __GNUC__ >= 4 # define CPL_UNUSED __attribute((__unused__)) #else /* TODO: add cases for other compilers */ # define CPL_UNUSED #endif #endif CPL_INLINE static void CPL_IGNORE_RET_VAL_INT(CPL_UNUSED int unused) {} /************************************************************************/ /* GTIFKeyGetSSHORT() */ /************************************************************************/ // Geotiff SHORT keys are supposed to be unsigned, but geo_normalize interface // uses signed short... static int GTIFKeyGetSSHORT( GTIF *gtif, geokey_t key, short* pnVal ) { unsigned short sVal; if( GTIFKeyGetSHORT(gtif, key, &sVal, 0, 1) == 1 ) { memcpy(pnVal, &sVal, 2); return 1; } return 0; } /************************************************************************/ /* GTIFGetPCSInfo() */ /************************************************************************/ int GTIFGetPCSInfoEx( void* ctxIn, int nPCSCode, char **ppszEPSGName, short *pnProjOp, short *pnUOMLengthCode, short *pnGeogCS ) { int nDatum; int nZone; /* Deal with a few well known CRS */ int Proj = GTIFPCSToMapSys( nPCSCode, &nDatum, &nZone ); if ((Proj == MapSys_UTM_North || Proj == MapSys_UTM_South) && nDatum != KvUserDefined) { const char* pszDatumName = NULL; switch (nDatum) { case GCS_NAD27: pszDatumName = "NAD27"; break; case GCS_NAD83: pszDatumName = "NAD83"; break; case GCS_WGS_72: pszDatumName = "WGS 72"; break; case GCS_WGS_72BE: pszDatumName = "WGS 72BE"; break; case GCS_WGS_84: pszDatumName = "WGS 84"; break; default: break; } if (pszDatumName) { if (ppszEPSGName) { char szEPSGName[64]; snprintf( szEPSGName, sizeof(szEPSGName), "%s / UTM zone %d%c", pszDatumName, nZone, (Proj == MapSys_UTM_North) ? 'N' : 'S'); *ppszEPSGName = CPLStrdup(szEPSGName); } if (pnProjOp) *pnProjOp = (short) (((Proj == MapSys_UTM_North) ? Proj_UTM_zone_1N - 1 : Proj_UTM_zone_1S - 1) + nZone); if (pnUOMLengthCode) *pnUOMLengthCode = 9001; /* Linear_Meter */ if (pnGeogCS) *pnGeogCS = (short) nDatum; return TRUE; } } if( nPCSCode == KvUserDefined ) return FALSE; PJ_CONTEXT* ctx = (PJ_CONTEXT*)ctxIn; { char szCode[12]; snprintf(szCode, sizeof(szCode), "%d", nPCSCode); PJ* proj_crs = proj_create_from_database( ctx, "EPSG", szCode, PJ_CATEGORY_CRS, 0, NULL); if( !proj_crs ) { return FALSE; } if( proj_get_type(proj_crs) != PJ_TYPE_PROJECTED_CRS ) { proj_destroy(proj_crs); return FALSE; } if( ppszEPSGName ) { const char* pszName = proj_get_name(proj_crs); if( !pszName ) { // shouldn't happen proj_destroy(proj_crs); return FALSE; } *ppszEPSGName = CPLStrdup(pszName); } if( pnProjOp ) { PJ* conversion = proj_crs_get_coordoperation( ctx, proj_crs); if( !conversion ) { // shouldn't happen except out of memory proj_destroy(proj_crs); return FALSE; } { const char* pszConvCode = proj_get_id_code(conversion, 0); assert( pszConvCode ); *pnProjOp = (short) atoi(pszConvCode); } proj_destroy(conversion); } if( pnUOMLengthCode ) { PJ* coordSys = proj_crs_get_coordinate_system( ctx, proj_crs); if( !coordSys ) { // shouldn't happen except out of memory proj_destroy(proj_crs); return FALSE; } { const char* pszUnitCode = NULL; if( !proj_cs_get_axis_info( ctx, coordSys, 0, NULL, /* name */ NULL, /* abbreviation*/ NULL, /* direction */ NULL, /* conversion factor */ NULL, /* unit name */ NULL, /* unit auth name (should be EPSG) */ &pszUnitCode) || pszUnitCode == NULL ) { proj_destroy(coordSys); return FALSE; } *pnUOMLengthCode = (short) atoi(pszUnitCode); proj_destroy(coordSys); } } if( pnGeogCS ) { PJ* geod_crs = proj_crs_get_geodetic_crs(ctx, proj_crs); if( !geod_crs ) { // shouldn't happen except out of memory proj_destroy(proj_crs); return FALSE; } { const char* pszGeodCode = proj_get_id_code(geod_crs, 0); assert( pszGeodCode ); *pnGeogCS = (short) atoi(pszGeodCode); } proj_destroy(geod_crs); } proj_destroy(proj_crs); return TRUE; } } int GTIFGetPCSInfo( int nPCSCode, char **ppszEPSGName, short *pnProjOp, short *pnUOMLengthCode, short *pnGeogCS ) { PJ_CONTEXT* ctx = proj_context_create(); int ret = GTIFGetPCSInfoEx(ctx, nPCSCode, ppszEPSGName, pnProjOp, pnUOMLengthCode, pnGeogCS); proj_context_destroy(ctx); return ret; } /************************************************************************/ /* GTIFAngleToDD() */ /* */ /* Convert a numeric angle to decimal degrees. */ /************************************************************************/ double GTIFAngleToDD( double dfAngle, int nUOMAngle ) { if( nUOMAngle == 9110 ) /* DDD.MMSSsss */ { if( dfAngle > -999.9 && dfAngle < 999.9 ) { char szAngleString[32]; snprintf(szAngleString, sizeof(szAngleString), "%12.7f", dfAngle); dfAngle = GTIFAngleStringToDD( szAngleString, nUOMAngle ); } } else if ( nUOMAngle != KvUserDefined ) { double dfInDegrees = 1.0; GTIFGetUOMAngleInfo( nUOMAngle, NULL, &dfInDegrees ); dfAngle = dfAngle * dfInDegrees; } return dfAngle; } /************************************************************************/ /* GTIFAngleStringToDD() */ /* */ /* Convert an angle in the specified units to decimal degrees. */ /************************************************************************/ double GTIFAngleStringToDD( const char * pszAngle, int nUOMAngle ) { double dfAngle; if( nUOMAngle == 9110 ) /* DDD.MMSSsss */ { char *pszDecimal; dfAngle = ABS(atoi(pszAngle)); pszDecimal = strchr(pszAngle,'.'); if( pszDecimal != NULL && strlen(pszDecimal) > 1 ) { char szMinutes[3]; char szSeconds[64]; szMinutes[0] = pszDecimal[1]; if( pszDecimal[2] >= '0' && pszDecimal[2] <= '9' ) szMinutes[1] = pszDecimal[2]; else szMinutes[1] = '0'; szMinutes[2] = '\0'; dfAngle += atoi(szMinutes) / 60.0; if( strlen(pszDecimal) > 3 ) { szSeconds[0] = pszDecimal[3]; if( pszDecimal[4] >= '0' && pszDecimal[4] <= '9' ) { szSeconds[1] = pszDecimal[4]; szSeconds[2] = '.'; strncpy( szSeconds+3, pszDecimal + 5, sizeof(szSeconds) - 3 ); szSeconds[sizeof(szSeconds) - 1] = 0; } else { szSeconds[1] = '0'; szSeconds[2] = '\0'; } dfAngle += GTIFAtof(szSeconds) / 3600.0; } } if( pszAngle[0] == '-' ) dfAngle *= -1; } else if( nUOMAngle == 9105 || nUOMAngle == 9106 ) /* grad */ { dfAngle = 180 * (GTIFAtof(pszAngle ) / 200); } else if( nUOMAngle == 9101 ) /* radians */ { dfAngle = 180 * (GTIFAtof(pszAngle ) / M_PI); } else if( nUOMAngle == 9103 ) /* arc-minute */ { dfAngle = GTIFAtof(pszAngle) / 60; } else if( nUOMAngle == 9104 ) /* arc-second */ { dfAngle = GTIFAtof(pszAngle) / 3600; } else /* decimal degrees ... some cases missing but seemingly never used */ { CPLAssert( nUOMAngle == 9102 || nUOMAngle == KvUserDefined || nUOMAngle == 0 ); dfAngle = GTIFAtof(pszAngle ); } return dfAngle; } /************************************************************************/ /* GTIFGetGCSInfo() */ /* */ /* Fetch the datum, and prime meridian related to a particular */ /* GCS. */ /************************************************************************/ int GTIFGetGCSInfoEx( void* ctxIn, int nGCSCode, char ** ppszName, short * pnDatum, short * pnPM, short *pnUOMAngle ) { int nDatum=0; /* -------------------------------------------------------------------- */ /* Handle some "well known" GCS codes directly */ /* -------------------------------------------------------------------- */ const char * pszName = NULL; const int nPM = PM_Greenwich; const int nUOMAngle = Angular_DMS_Hemisphere; if( nGCSCode == GCS_NAD27 ) { nDatum = Datum_North_American_Datum_1927; pszName = "NAD27"; } else if( nGCSCode == GCS_NAD83 ) { nDatum = Datum_North_American_Datum_1983; pszName = "NAD83"; } else if( nGCSCode == GCS_WGS_84 ) { nDatum = Datum_WGS84; pszName = "WGS 84"; } else if( nGCSCode == GCS_WGS_72 ) { nDatum = Datum_WGS72; pszName = "WGS 72"; } else if ( nGCSCode == KvUserDefined ) { return FALSE; } if (pszName != NULL) { if( ppszName != NULL ) *ppszName = CPLStrdup( pszName ); if( pnDatum != NULL ) *pnDatum = (short) nDatum; if( pnPM != NULL ) *pnPM = (short) nPM; if( pnUOMAngle != NULL ) *pnUOMAngle = (short) nUOMAngle; return TRUE; } /* -------------------------------------------------------------------- */ /* Search the database. */ /* -------------------------------------------------------------------- */ PJ_CONTEXT* ctx = (PJ_CONTEXT*)ctxIn; { char szCode[12]; snprintf(szCode, sizeof(szCode), "%d", nGCSCode); PJ* geod_crs = proj_create_from_database( ctx, "EPSG", szCode, PJ_CATEGORY_CRS, 0, NULL); if( !geod_crs ) { return FALSE; } { const int objType = proj_get_type(geod_crs); if( objType != PJ_TYPE_GEODETIC_CRS && objType != PJ_TYPE_GEOCENTRIC_CRS && objType != PJ_TYPE_GEOGRAPHIC_2D_CRS && objType != PJ_TYPE_GEOGRAPHIC_3D_CRS ) { proj_destroy(geod_crs); return FALSE; } } if( ppszName ) { pszName = proj_get_name(geod_crs); if( !pszName ) { // shouldn't happen proj_destroy(geod_crs); return FALSE; } *ppszName = CPLStrdup(pszName); } if( pnDatum ) { #if PROJ_VERSION_MAJOR >= 8 PJ* datum = proj_crs_get_datum_forced(ctx, geod_crs); #else PJ* datum = proj_crs_get_datum(ctx, geod_crs); #endif if( !datum ) { proj_destroy(geod_crs); return FALSE; } { const char* pszDatumCode = proj_get_id_code(datum, 0); assert( pszDatumCode ); *pnDatum = (short) atoi(pszDatumCode); } proj_destroy(datum); } if( pnPM ) { PJ* pm = proj_get_prime_meridian(ctx, geod_crs); if( !pm ) { proj_destroy(geod_crs); return FALSE; } { const char* pszPMCode = proj_get_id_code(pm, 0); assert( pszPMCode ); *pnPM = (short) atoi(pszPMCode); } proj_destroy(pm); } if( pnUOMAngle ) { PJ* coordSys = proj_crs_get_coordinate_system( ctx, geod_crs); if( !coordSys ) { // shouldn't happen except out of memory proj_destroy(geod_crs); return FALSE; } { const char* pszUnitCode = NULL; if( !proj_cs_get_axis_info( ctx, coordSys, 0, NULL, /* name */ NULL, /* abbreviation*/ NULL, /* direction */ NULL, /* conversion factor */ NULL, /* unit name */ NULL, /* unit auth name (should be EPSG) */ &pszUnitCode) || pszUnitCode == NULL ) { proj_destroy(coordSys); return FALSE; } *pnUOMAngle = (short) atoi(pszUnitCode); proj_destroy(coordSys); } } proj_destroy(geod_crs); return TRUE; } } int GTIFGetGCSInfo( int nGCSCode, char ** ppszName, short * pnDatum, short * pnPM, short *pnUOMAngle ) { PJ_CONTEXT* ctx = proj_context_create(); const int ret = GTIFGetGCSInfoEx(ctx, nGCSCode, ppszName, pnDatum, pnPM, pnUOMAngle); proj_context_destroy(ctx); return ret; } /************************************************************************/ /* GTIFGetEllipsoidInfo() */ /* */ /* Fetch info about an ellipsoid. Axes are always returned in */ /* meters. SemiMajor computed based on inverse flattening */ /* where that is provided. */ /************************************************************************/ int GTIFGetEllipsoidInfoEx( void* ctxIn, int nEllipseCode, char ** ppszName, double * pdfSemiMajor, double * pdfSemiMinor ) { PJ_CONTEXT* ctx = (PJ_CONTEXT*)ctxIn; /* -------------------------------------------------------------------- */ /* Try some well known ellipsoids. */ /* -------------------------------------------------------------------- */ double dfSemiMajor=0.0; double dfInvFlattening=0.0, dfSemiMinor=0.0; const char *pszName = NULL; if( nEllipseCode == Ellipse_Clarke_1866 ) { pszName = "Clarke 1866"; dfSemiMajor = 6378206.4; dfSemiMinor = 6356583.8; dfInvFlattening = 0.0; } else if( nEllipseCode == Ellipse_GRS_1980 ) { pszName = "GRS 1980"; dfSemiMajor = 6378137.0; dfSemiMinor = 0.0; dfInvFlattening = 298.257222101; } else if( nEllipseCode == Ellipse_WGS_84 ) { pszName = "WGS 84"; dfSemiMajor = 6378137.0; dfSemiMinor = 0.0; dfInvFlattening = 298.257223563; } else if( nEllipseCode == 7043 ) { pszName = "WGS 72"; dfSemiMajor = 6378135.0; dfSemiMinor = 0.0; dfInvFlattening = 298.26; } if (pszName != NULL) { if( dfSemiMinor == 0.0 ) dfSemiMinor = dfSemiMajor * (1 - 1.0/dfInvFlattening); if( pdfSemiMinor != NULL ) *pdfSemiMinor = dfSemiMinor; if( pdfSemiMajor != NULL ) *pdfSemiMajor = dfSemiMajor; if( ppszName != NULL ) *ppszName = CPLStrdup( pszName ); return TRUE; } if( nEllipseCode == KvUserDefined ) return FALSE; /* -------------------------------------------------------------------- */ /* Search the database. */ /* -------------------------------------------------------------------- */ { char szCode[12]; snprintf(szCode, sizeof(szCode), "%d", nEllipseCode); PJ* ellipsoid = proj_create_from_database( ctx, "EPSG", szCode, PJ_CATEGORY_ELLIPSOID, 0, NULL); if( !ellipsoid ) { return FALSE; } if( ppszName ) { pszName = proj_get_name(ellipsoid); if( !pszName ) { // shouldn't happen proj_destroy(ellipsoid); return FALSE; } *ppszName = CPLStrdup(pszName); } proj_ellipsoid_get_parameters( ctx, ellipsoid, pdfSemiMajor, pdfSemiMinor, NULL, NULL); proj_destroy(ellipsoid); return TRUE; } } int GTIFGetEllipsoidInfo( int nEllipseCode, char ** ppszName, double * pdfSemiMajor, double * pdfSemiMinor ) { PJ_CONTEXT* ctx = proj_context_create(); const int ret = GTIFGetEllipsoidInfoEx(ctx, nEllipseCode, ppszName, pdfSemiMajor, pdfSemiMinor); proj_context_destroy(ctx); return ret; } /************************************************************************/ /* GTIFGetPMInfo() */ /* */ /* Get the offset between a given prime meridian and Greenwich */ /* in degrees. */ /************************************************************************/ int GTIFGetPMInfoEx( void* ctxIn, int nPMCode, char ** ppszName, double *pdfOffset ) { /* -------------------------------------------------------------------- */ /* Use a special short cut for Greenwich, since it is so common. */ /* -------------------------------------------------------------------- */ if( nPMCode == PM_Greenwich ) { if( pdfOffset != NULL ) *pdfOffset = 0.0; if( ppszName != NULL ) *ppszName = CPLStrdup( "Greenwich" ); return TRUE; } if( nPMCode == KvUserDefined ) return FALSE; /* -------------------------------------------------------------------- */ /* Search the database. */ /* -------------------------------------------------------------------- */ PJ_CONTEXT* ctx = (PJ_CONTEXT*)ctxIn; { char szCode[12]; snprintf(szCode, sizeof(szCode), "%d", nPMCode); PJ* pm = proj_create_from_database( ctx, "EPSG", szCode, PJ_CATEGORY_PRIME_MERIDIAN, 0, NULL); if( !pm ) { return FALSE; } if( ppszName ) { const char* pszName = proj_get_name(pm); if( !pszName ) { // shouldn't happen proj_destroy(pm); return FALSE; } *ppszName = CPLStrdup(pszName); } if( pdfOffset ) { double conv_factor = 0; proj_prime_meridian_get_parameters( ctx, pm, pdfOffset, &conv_factor, NULL); *pdfOffset *= conv_factor * 180.0 / M_PI; } proj_destroy(pm); return TRUE; } } int GTIFGetPMInfo( int nPMCode, char ** ppszName, double *pdfOffset ) { PJ_CONTEXT* ctx = proj_context_create(); const int ret = GTIFGetPMInfoEx(ctx, nPMCode, ppszName, pdfOffset); proj_context_destroy(ctx); return ret; } /************************************************************************/ /* GTIFGetDatumInfo() */ /* */ /* Fetch the ellipsoid, and name for a datum. */ /************************************************************************/ int GTIFGetDatumInfoEx( void* ctxIn, int nDatumCode, char ** ppszName, short * pnEllipsoid ) { const char* pszName = NULL; int nEllipsoid = 0; /* -------------------------------------------------------------------- */ /* Handle a few built-in datums. */ /* -------------------------------------------------------------------- */ if( nDatumCode == Datum_North_American_Datum_1927 ) { nEllipsoid = Ellipse_Clarke_1866; pszName = "North American Datum 1927"; } else if( nDatumCode == Datum_North_American_Datum_1983 ) { nEllipsoid = Ellipse_GRS_1980; pszName = "North American Datum 1983"; } else if( nDatumCode == Datum_WGS84 ) { nEllipsoid = Ellipse_WGS_84; pszName = "World Geodetic System 1984"; } else if( nDatumCode == Datum_WGS72 ) { nEllipsoid = 7043; /* WGS72 */ pszName = "World Geodetic System 1972"; } if (pszName != NULL) { if( pnEllipsoid != NULL ) *pnEllipsoid = (short) nEllipsoid; if( ppszName != NULL ) *ppszName = CPLStrdup( pszName ); return TRUE; } if( nDatumCode == KvUserDefined ) return FALSE; /* -------------------------------------------------------------------- */ /* Search the database. */ /* -------------------------------------------------------------------- */ PJ_CONTEXT* ctx = (PJ_CONTEXT*)ctxIn; { char szCode[12]; snprintf(szCode, sizeof(szCode), "%d", nDatumCode); PJ* datum = proj_create_from_database( ctx, "EPSG", szCode, PJ_CATEGORY_DATUM, 0, NULL); if( !datum ) { return FALSE; } const PJ_TYPE pjType = proj_get_type(datum); if( pjType != PJ_TYPE_GEODETIC_REFERENCE_FRAME && pjType != PJ_TYPE_DYNAMIC_GEODETIC_REFERENCE_FRAME ) { proj_destroy(datum); return FALSE; } if( ppszName ) { pszName = proj_get_name(datum); if( !pszName ) { // shouldn't happen proj_destroy(datum); return FALSE; } *ppszName = CPLStrdup(pszName); } if( pnEllipsoid ) { PJ* ellipsoid = proj_get_ellipsoid(ctx, datum); if( !ellipsoid ) { proj_destroy(datum); return FALSE; } { const char* pszEllipsoidCode = proj_get_id_code( ellipsoid, 0); assert( pszEllipsoidCode ); *pnEllipsoid = (short) atoi(pszEllipsoidCode); } proj_destroy(ellipsoid); } proj_destroy(datum); return TRUE; } } int GTIFGetDatumInfo( int nDatumCode, char ** ppszName, short * pnEllipsoid ) { PJ_CONTEXT* ctx = proj_context_create(); const int ret = GTIFGetDatumInfoEx(ctx, nDatumCode, ppszName, pnEllipsoid); proj_context_destroy(ctx); return ret; } /************************************************************************/ /* GTIFGetUOMLengthInfo() */ /* */ /* Note: This function should eventually also know how to */ /* lookup length aliases in the UOM_LE_ALIAS table. */ /************************************************************************/ int GTIFGetUOMLengthInfoEx( void* ctxIn, int nUOMLengthCode, char **ppszUOMName, double * pdfInMeters ) { /* -------------------------------------------------------------------- */ /* We short cut meter to save work and avoid failure for missing */ /* in the most common cases. */ /* -------------------------------------------------------------------- */ if( nUOMLengthCode == 9001 ) { if( ppszUOMName != NULL ) *ppszUOMName = CPLStrdup( "metre" ); if( pdfInMeters != NULL ) *pdfInMeters = 1.0; return TRUE; } if( nUOMLengthCode == 9002 ) { if( ppszUOMName != NULL ) *ppszUOMName = CPLStrdup( "foot" ); if( pdfInMeters != NULL ) *pdfInMeters = 0.3048; return TRUE; } if( nUOMLengthCode == 9003 ) { if( ppszUOMName != NULL ) *ppszUOMName = CPLStrdup( "US survey foot" ); if( pdfInMeters != NULL ) *pdfInMeters = 12.0 / 39.37; return TRUE; } if( nUOMLengthCode == KvUserDefined ) return FALSE; /* -------------------------------------------------------------------- */ /* Search the units database for this unit. If we don't find */ /* it return failure. */ /* -------------------------------------------------------------------- */ char szCode[12]; const char* pszName = NULL; snprintf(szCode, sizeof(szCode), "%d", nUOMLengthCode); PJ_CONTEXT* ctx = (PJ_CONTEXT*)ctxIn; if( !proj_uom_get_info_from_database( ctx, "EPSG", szCode, &pszName, pdfInMeters, NULL) ) { return FALSE; } if( ppszUOMName ) { *ppszUOMName = CPLStrdup(pszName); } return TRUE; } int GTIFGetUOMLengthInfo( int nUOMLengthCode, char **ppszUOMName, double * pdfInMeters ) { PJ_CONTEXT* ctx = proj_context_create(); const int ret = GTIFGetUOMLengthInfoEx( ctx, nUOMLengthCode, ppszUOMName, pdfInMeters); proj_context_destroy(ctx); return ret; } /************************************************************************/ /* GTIFGetUOMAngleInfo() */ /************************************************************************/ int GTIFGetUOMAngleInfoEx( void* ctxIn, int nUOMAngleCode, char **ppszUOMName, double * pdfInDegrees ) { const char *pszUOMName = NULL; double dfInDegrees = 1.0; switch( nUOMAngleCode ) { case 9101: pszUOMName = "radian"; dfInDegrees = 180.0 / M_PI; break; case 9102: case 9107: case 9108: case 9110: case 9122: pszUOMName = "degree"; dfInDegrees = 1.0; break; case 9103: pszUOMName = "arc-minute"; dfInDegrees = 1 / 60.0; break; case 9104: pszUOMName = "arc-second"; dfInDegrees = 1 / 3600.0; break; case 9105: pszUOMName = "grad"; dfInDegrees = 180.0 / 200.0; break; case 9106: pszUOMName = "gon"; dfInDegrees = 180.0 / 200.0; break; case 9109: pszUOMName = "microradian"; dfInDegrees = 180.0 / (M_PI * 1000000.0); break; default: break; } if (pszUOMName) { if( ppszUOMName != NULL ) { *ppszUOMName = CPLStrdup( pszUOMName ); } if( pdfInDegrees != NULL ) *pdfInDegrees = dfInDegrees; return TRUE; } if( nUOMAngleCode == KvUserDefined ) return FALSE; /* -------------------------------------------------------------------- */ /* Search the units database for this unit. If we don't find */ /* it return failure. */ /* -------------------------------------------------------------------- */ char szCode[12]; const char* pszName = NULL; double dfConvFactorToRadians = 0; snprintf(szCode, sizeof(szCode), "%d", nUOMAngleCode); PJ_CONTEXT* ctx = (PJ_CONTEXT*)ctxIn; if( !proj_uom_get_info_from_database( ctx, "EPSG", szCode, &pszName, &dfConvFactorToRadians, NULL) ) { return FALSE; } if( ppszUOMName ) { *ppszUOMName = CPLStrdup(pszName); } if( pdfInDegrees ) { *pdfInDegrees = dfConvFactorToRadians * 180.0 / M_PI; } return TRUE; } int GTIFGetUOMAngleInfo( int nUOMAngleCode, char **ppszUOMName, double * pdfInDegrees ) { PJ_CONTEXT* ctx = proj_context_create(); const int ret = GTIFGetUOMAngleInfoEx( ctx, nUOMAngleCode, ppszUOMName, pdfInDegrees); proj_context_destroy(ctx); return ret; } /************************************************************************/ /* EPSGProjMethodToCTProjMethod() */ /* */ /* Convert between the EPSG enumeration for projection methods, */ /* and the GeoTIFF CT codes. */ /************************************************************************/ static int EPSGProjMethodToCTProjMethod( int nEPSG, int bReturnExtendedCTCode ) { switch( nEPSG ) { case 9801: return CT_LambertConfConic_1SP; case 9802: return CT_LambertConfConic_2SP; case 9803: return CT_LambertConfConic_2SP; /* Belgian variant not supported */ case 9804: return CT_Mercator; /* 1SP and 2SP not differentiated */ case 9805: if( bReturnExtendedCTCode ) return CT_Ext_Mercator_2SP; else return CT_Mercator; /* 1SP and 2SP not differentiated */ /* Mercator 1SP (Spherical) For EPSG:3785 */ case 9841: return CT_Mercator; /* 1SP and 2SP not differentiated */ /* Google Mercator For EPSG:3857 */ case 1024: return CT_Mercator; /* 1SP and 2SP not differentiated */ case 9806: return CT_CassiniSoldner; case 9807: return CT_TransverseMercator; case 9808: return CT_TransvMercator_SouthOriented; case 9809: return CT_ObliqueStereographic; case 9810: case 9829: /* variant B not quite the same - not sure how to handle */ return CT_PolarStereographic; case 9811: return CT_NewZealandMapGrid; case 9812: return CT_ObliqueMercator; /* is hotine actually different? */ case 9813: return CT_ObliqueMercator_Laborde; case 9814: return CT_ObliqueMercator_Rosenmund; /* swiss */ case 9815: return CT_HotineObliqueMercatorAzimuthCenter; case 9816: /* tunesia mining grid has no counterpart */ return KvUserDefined; case 9818: return CT_Polyconic; case 9820: case 1027: return CT_LambertAzimEqualArea; case 9822: return CT_AlbersEqualArea; case 9834: return CT_CylindricalEqualArea; case 1028: case 1029: case 9823: /* spherical */ case 9842: /* elliptical */ return CT_Equirectangular; default: /* use the EPSG code for other methods */ return nEPSG; } } /************************************************************************/ /* SetGTParamIds() */ /* */ /* This is hardcoded logic to set the GeoTIFF parameter */ /* identifiers for all the EPSG supported projections. As new */ /* projection methods are added, this code will need to be updated */ /************************************************************************/ static int SetGTParamIds( int nCTProjection, int nEPSGProjMethod, int *panProjParamId, int *panEPSGCodes ) { int anWorkingDummy[7]; if( panEPSGCodes == NULL ) panEPSGCodes = anWorkingDummy; if( panProjParamId == NULL ) panProjParamId = anWorkingDummy; memset( panEPSGCodes, 0, sizeof(int) * 7 ); /* psDefn->nParms = 7; */ switch( nCTProjection ) { case CT_CassiniSoldner: case CT_NewZealandMapGrid: case CT_Polyconic: panProjParamId[0] = ProjNatOriginLatGeoKey; panProjParamId[1] = ProjNatOriginLongGeoKey; panProjParamId[5] = ProjFalseEastingGeoKey; panProjParamId[6] = ProjFalseNorthingGeoKey; panEPSGCodes[0] = EPSGNatOriginLat; panEPSGCodes[1] = EPSGNatOriginLong; panEPSGCodes[5] = EPSGFalseEasting; panEPSGCodes[6] = EPSGFalseNorthing; return TRUE; case CT_ObliqueMercator: case CT_HotineObliqueMercatorAzimuthCenter: panProjParamId[0] = ProjCenterLatGeoKey; panProjParamId[1] = ProjCenterLongGeoKey; panProjParamId[2] = ProjAzimuthAngleGeoKey; panProjParamId[3] = ProjRectifiedGridAngleGeoKey; panProjParamId[4] = ProjScaleAtCenterGeoKey; panProjParamId[5] = ProjFalseEastingGeoKey; panProjParamId[6] = ProjFalseNorthingGeoKey; panEPSGCodes[0] = EPSGProjCenterLat; panEPSGCodes[1] = EPSGProjCenterLong; panEPSGCodes[2] = EPSGAzimuth; panEPSGCodes[3] = EPSGAngleRectifiedToSkewedGrid; panEPSGCodes[4] = EPSGInitialLineScaleFactor; panEPSGCodes[5] = EPSGProjCenterEasting; /* EPSG proj method 9812 uses EPSGFalseEasting, but 9815 uses EPSGProjCenterEasting */ panEPSGCodes[6] = EPSGProjCenterNorthing; /* EPSG proj method 9812 uses EPSGFalseNorthing, but 9815 uses EPSGProjCenterNorthing */ return TRUE; case CT_ObliqueMercator_Laborde: panProjParamId[0] = ProjCenterLatGeoKey; panProjParamId[1] = ProjCenterLongGeoKey; panProjParamId[2] = ProjAzimuthAngleGeoKey; panProjParamId[4] = ProjScaleAtCenterGeoKey; panProjParamId[5] = ProjFalseEastingGeoKey; panProjParamId[6] = ProjFalseNorthingGeoKey; panEPSGCodes[0] = EPSGProjCenterLat; panEPSGCodes[1] = EPSGProjCenterLong; panEPSGCodes[2] = EPSGAzimuth; panEPSGCodes[4] = EPSGInitialLineScaleFactor; panEPSGCodes[5] = EPSGFalseEasting; panEPSGCodes[6] = EPSGFalseNorthing; return TRUE; case CT_LambertConfConic_1SP: case CT_Mercator: case CT_ObliqueStereographic: case CT_PolarStereographic: case CT_TransverseMercator: case CT_TransvMercator_SouthOriented: panProjParamId[0] = ProjNatOriginLatGeoKey; if( nCTProjection == CT_PolarStereographic ) { panProjParamId[1] = ProjStraightVertPoleLongGeoKey; } else { panProjParamId[1] = ProjNatOriginLongGeoKey; } if( nEPSGProjMethod == 9805 ) /* Mercator_2SP */ { panProjParamId[2] = ProjStdParallel1GeoKey; } panProjParamId[4] = ProjScaleAtNatOriginGeoKey; panProjParamId[5] = ProjFalseEastingGeoKey; panProjParamId[6] = ProjFalseNorthingGeoKey; panEPSGCodes[0] = EPSGNatOriginLat; panEPSGCodes[1] = EPSGNatOriginLong; if( nEPSGProjMethod == 9805 ) /* Mercator_2SP */ { panEPSGCodes[2] = EPSGStdParallel1Lat; } panEPSGCodes[4] = EPSGNatOriginScaleFactor; panEPSGCodes[5] = EPSGFalseEasting; panEPSGCodes[6] = EPSGFalseNorthing; return TRUE; case CT_LambertConfConic_2SP: panProjParamId[0] = ProjFalseOriginLatGeoKey; panProjParamId[1] = ProjFalseOriginLongGeoKey; panProjParamId[2] = ProjStdParallel1GeoKey; panProjParamId[3] = ProjStdParallel2GeoKey; panProjParamId[5] = ProjFalseEastingGeoKey; panProjParamId[6] = ProjFalseNorthingGeoKey; panEPSGCodes[0] = EPSGFalseOriginLat; panEPSGCodes[1] = EPSGFalseOriginLong; panEPSGCodes[2] = EPSGStdParallel1Lat; panEPSGCodes[3] = EPSGStdParallel2Lat; panEPSGCodes[5] = EPSGFalseOriginEasting; panEPSGCodes[6] = EPSGFalseOriginNorthing; return TRUE; case CT_AlbersEqualArea: panProjParamId[0] = ProjStdParallel1GeoKey; panProjParamId[1] = ProjStdParallel2GeoKey; panProjParamId[2] = ProjNatOriginLatGeoKey; panProjParamId[3] = ProjNatOriginLongGeoKey; panProjParamId[5] = ProjFalseEastingGeoKey; panProjParamId[6] = ProjFalseNorthingGeoKey; panEPSGCodes[0] = EPSGStdParallel1Lat; panEPSGCodes[1] = EPSGStdParallel2Lat; panEPSGCodes[2] = EPSGFalseOriginLat; panEPSGCodes[3] = EPSGFalseOriginLong; panEPSGCodes[5] = EPSGFalseOriginEasting; panEPSGCodes[6] = EPSGFalseOriginNorthing; return TRUE; case CT_SwissObliqueCylindrical: panProjParamId[0] = ProjCenterLatGeoKey; panProjParamId[1] = ProjCenterLongGeoKey; panProjParamId[5] = ProjFalseEastingGeoKey; panProjParamId[6] = ProjFalseNorthingGeoKey; /* EPSG codes? */ return TRUE; case CT_LambertAzimEqualArea: panProjParamId[0] = ProjCenterLatGeoKey; panProjParamId[1] = ProjCenterLongGeoKey; panProjParamId[5] = ProjFalseEastingGeoKey; panProjParamId[6] = ProjFalseNorthingGeoKey; panEPSGCodes[0] = EPSGNatOriginLat; panEPSGCodes[1] = EPSGNatOriginLong; panEPSGCodes[5] = EPSGFalseEasting; panEPSGCodes[6] = EPSGFalseNorthing; return TRUE; case CT_CylindricalEqualArea: panProjParamId[0] = ProjStdParallel1GeoKey; panProjParamId[1] = ProjNatOriginLongGeoKey; panProjParamId[5] = ProjFalseEastingGeoKey; panProjParamId[6] = ProjFalseNorthingGeoKey; panEPSGCodes[0] = EPSGStdParallel1Lat; panEPSGCodes[1] = EPSGFalseOriginLong; panEPSGCodes[5] = EPSGFalseOriginEasting; panEPSGCodes[6] = EPSGFalseOriginNorthing; return TRUE; case CT_Equirectangular: panProjParamId[0] = ProjCenterLatGeoKey; panProjParamId[1] = ProjCenterLongGeoKey; panProjParamId[2] = ProjStdParallel1GeoKey; panProjParamId[5] = ProjFalseEastingGeoKey; panProjParamId[6] = ProjFalseNorthingGeoKey; panEPSGCodes[0] = EPSGNatOriginLat; panEPSGCodes[1] = EPSGNatOriginLong; panEPSGCodes[2] = EPSGStdParallel1Lat; panEPSGCodes[5] = EPSGFalseEasting; panEPSGCodes[6] = EPSGFalseNorthing; return TRUE; case CT_Ext_Mercator_2SP: panProjParamId[0] = ProjNatOriginLatGeoKey; panProjParamId[1] = ProjNatOriginLongGeoKey; panProjParamId[2] = ProjStdParallel1GeoKey; panProjParamId[5] = ProjFalseEastingGeoKey; panProjParamId[6] = ProjFalseNorthingGeoKey; panEPSGCodes[0] = EPSGNatOriginLat; panEPSGCodes[1] = EPSGNatOriginLong; panEPSGCodes[2] = EPSGStdParallel1Lat; panEPSGCodes[5] = EPSGFalseEasting; panEPSGCodes[6] = EPSGFalseNorthing; return TRUE; default: return FALSE; } } /************************************************************************/ /* GTIFGetProjTRFInfo() */ /* */ /* Transform a PROJECTION_TRF_CODE into a projection method, */ /* and a set of parameters. The parameters identify will */ /* depend on the returned method, but they will all have been */ /* normalized into degrees and meters. */ /************************************************************************/ int GTIFGetProjTRFInfoEx( void* ctxIn, int nProjTRFCode, char **ppszProjTRFName, short * pnProjMethod, double * padfProjParams ) { if ((nProjTRFCode >= Proj_UTM_zone_1N && nProjTRFCode <= Proj_UTM_zone_60N) || (nProjTRFCode >= Proj_UTM_zone_1S && nProjTRFCode <= Proj_UTM_zone_60S)) { int bNorth; int nZone; if (nProjTRFCode <= Proj_UTM_zone_60N) { bNorth = TRUE; nZone = nProjTRFCode - Proj_UTM_zone_1N + 1; } else { bNorth = FALSE; nZone = nProjTRFCode - Proj_UTM_zone_1S + 1; } if (ppszProjTRFName) { char szProjTRFName[64]; snprintf(szProjTRFName, sizeof(szProjTRFName), "UTM zone %d%c", nZone, (bNorth) ? 'N' : 'S'); *ppszProjTRFName = CPLStrdup(szProjTRFName); } if (pnProjMethod) *pnProjMethod = 9807; if (padfProjParams) { padfProjParams[0] = 0; padfProjParams[1] = -183 + 6 * nZone; padfProjParams[2] = 0; padfProjParams[3] = 0; padfProjParams[4] = 0.9996; padfProjParams[5] = 500000; padfProjParams[6] = (bNorth) ? 0 : 10000000; } return TRUE; } if( nProjTRFCode == KvUserDefined ) return FALSE; { char szCode[12]; snprintf(szCode, sizeof(szCode), "%d", nProjTRFCode); PJ_CONTEXT* ctx = (PJ_CONTEXT*)ctxIn; PJ *transf = proj_create_from_database( ctx, "EPSG", szCode, PJ_CATEGORY_COORDINATE_OPERATION, 0, NULL); if( !transf ) { return FALSE; } if( proj_get_type(transf) != PJ_TYPE_CONVERSION ) { proj_destroy(transf); return FALSE; } /* Get the projection method code */ const char* pszMethodCode = NULL; proj_coordoperation_get_method_info(ctx, transf, NULL, /* method name */ NULL, /* method auth name (should be EPSG) */ &pszMethodCode); assert( pszMethodCode ); const int nProjMethod = atoi(pszMethodCode); /* -------------------------------------------------------------------- */ /* Initialize a definition of what EPSG codes need to be loaded */ /* into what fields in adfProjParams. */ /* -------------------------------------------------------------------- */ const int nCTProjMethod = EPSGProjMethodToCTProjMethod( nProjMethod, TRUE ); int anEPSGCodes[7]; SetGTParamIds( nCTProjMethod, nProjMethod, NULL, anEPSGCodes ); /* -------------------------------------------------------------------- */ /* Get the parameters for this projection. */ /* -------------------------------------------------------------------- */ double adfProjParams[7]; for( int i = 0; i < 7; i++ ) { int nEPSGCode = anEPSGCodes[i]; /* Establish default */ if( nEPSGCode == EPSGAngleRectifiedToSkewedGrid ) adfProjParams[i] = 90.0; else if( nEPSGCode == EPSGNatOriginScaleFactor || nEPSGCode == EPSGInitialLineScaleFactor || nEPSGCode == EPSGPseudoStdParallelScaleFactor ) adfProjParams[i] = 1.0; else adfProjParams[i] = 0.0; /* If there is no parameter, skip */ if( nEPSGCode == 0 ) continue; const int nParamCount = proj_coordoperation_get_param_count(ctx, transf); /* Find the matching parameter */ const char *pszUOMCategory = NULL; double dfValue = 0.0; double dfUnitConvFactor = 0.0; int iEPSG; /* Used after for */ for( iEPSG = 0; iEPSG < nParamCount; iEPSG++ ) { const char* pszParamCode = NULL; proj_coordoperation_get_param( ctx, transf, iEPSG, NULL, /* name */ NULL, /* auth name */ &pszParamCode, &dfValue, NULL, /* value (string) */ &dfUnitConvFactor, /* unit conv factor */ NULL, /* unit name */ NULL, /* unit auth name */ NULL, /* unit code */ &pszUOMCategory /* unit category */); assert(pszParamCode); if( atoi(pszParamCode) == nEPSGCode ) { break; } } /* not found, accept the default */ if( iEPSG == nParamCount ) { /* for CT_ObliqueMercator try alternate parameter codes first */ /* because EPSG proj method 9812 uses EPSGFalseXXXXX, but 9815 uses EPSGProjCenterXXXXX */ if ( nCTProjMethod == CT_ObliqueMercator && nEPSGCode == EPSGProjCenterEasting ) nEPSGCode = EPSGFalseEasting; else if ( nCTProjMethod == CT_ObliqueMercator && nEPSGCode == EPSGProjCenterNorthing ) nEPSGCode = EPSGFalseNorthing; /* for CT_PolarStereographic try alternate parameter codes first */ /* because EPSG proj method 9829 uses EPSGLatOfStdParallel instead of EPSGNatOriginLat */ /* and EPSGOriginLong instead of EPSGNatOriginLong */ else if( nCTProjMethod == CT_PolarStereographic && nEPSGCode == EPSGNatOriginLat ) nEPSGCode = EPSGLatOfStdParallel; else if( nCTProjMethod == CT_PolarStereographic && nEPSGCode == EPSGNatOriginLong ) nEPSGCode = EPSGOriginLong; else continue; for( iEPSG = 0; iEPSG < nParamCount; iEPSG++ ) { const char* pszParamCode = NULL; proj_coordoperation_get_param( ctx, transf, iEPSG, NULL, /* name */ NULL, /* auth name */ &pszParamCode, &dfValue, NULL, /* value (string) */ &dfUnitConvFactor, /* unit conv factor */ NULL, /* unit name */ NULL, /* unit auth name */ NULL, /* unit code */ &pszUOMCategory /* unit category */); assert(pszParamCode); if( atoi(pszParamCode) == nEPSGCode ) { break; } } if( iEPSG == nParamCount ) continue; } assert(pszUOMCategory); adfProjParams[i] = dfValue * dfUnitConvFactor; if( strcmp(pszUOMCategory, "angular") == 0.0 ) { /* Convert from radians to degrees */ adfProjParams[i] *= 180 / M_PI; } } /* -------------------------------------------------------------------- */ /* Get the name, if requested. */ /* -------------------------------------------------------------------- */ if( ppszProjTRFName != NULL ) { const char* pszName = proj_get_name(transf); if( !pszName ) { // shouldn't happen proj_destroy(transf); return FALSE; } *ppszProjTRFName = CPLStrdup(pszName); } /* -------------------------------------------------------------------- */ /* Transfer requested data into passed variables. */ /* -------------------------------------------------------------------- */ if( pnProjMethod != NULL ) *pnProjMethod = (short) nProjMethod; if( padfProjParams != NULL ) { for( int i = 0; i < 7; i++ ) padfProjParams[i] = adfProjParams[i]; } proj_destroy(transf); return TRUE; } } int GTIFGetProjTRFInfo( /* Conversion code */ int nProjTRFCode, char **ppszProjTRFName, short * pnProjMethod, double * padfProjParams ) { PJ_CONTEXT* ctx = proj_context_create(); const int ret = GTIFGetProjTRFInfoEx( ctx, nProjTRFCode, ppszProjTRFName, pnProjMethod, padfProjParams); proj_context_destroy(ctx); return ret; } /************************************************************************/ /* GTIFFetchProjParms() */ /* */ /* Fetch the projection parameters for a particular projection */ /* from a GeoTIFF file, and fill the GTIFDefn structure out */ /* with them. */ /************************************************************************/ static void GTIFFetchProjParms( GTIF * psGTIF, GTIFDefn * psDefn ) { /* -------------------------------------------------------------------- */ /* Get the false easting, and northing if available. */ /* -------------------------------------------------------------------- */ double dfFalseEasting = 0.0; if( !GTIFKeyGetDOUBLE(psGTIF, ProjFalseEastingGeoKey, &dfFalseEasting, 0, 1) && !GTIFKeyGetDOUBLE(psGTIF, ProjCenterEastingGeoKey, &dfFalseEasting, 0, 1) && !GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginEastingGeoKey, &dfFalseEasting, 0, 1) ) dfFalseEasting = 0.0; double dfFalseNorthing = 0.0; if( !GTIFKeyGetDOUBLE(psGTIF, ProjFalseNorthingGeoKey, &dfFalseNorthing,0,1) && !GTIFKeyGetDOUBLE(psGTIF, ProjCenterNorthingGeoKey, &dfFalseNorthing, 0, 1) && !GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginNorthingGeoKey, &dfFalseNorthing, 0, 1) ) dfFalseNorthing = 0.0; double dfNatOriginLong = 0.0, dfNatOriginLat = 0.0, dfRectGridAngle = 0.0; double dfNatOriginScale = 1.0; double dfStdParallel1 = 0.0, dfStdParallel2 = 0.0, dfAzimuth = 0.0; switch( psDefn->CTProjection ) { /* -------------------------------------------------------------------- */ case CT_Stereographic: /* -------------------------------------------------------------------- */ if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 ) dfNatOriginLong = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 ) dfNatOriginLat = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjScaleAtNatOriginGeoKey, &dfNatOriginScale, 0, 1 ) == 0 ) dfNatOriginScale = 1.0; /* notdef: should transform to decimal degrees at this point */ psDefn->ProjParm[0] = dfNatOriginLat; psDefn->ProjParmId[0] = ProjCenterLatGeoKey; psDefn->ProjParm[1] = dfNatOriginLong; psDefn->ProjParmId[1] = ProjCenterLongGeoKey; psDefn->ProjParm[4] = dfNatOriginScale; psDefn->ProjParmId[4] = ProjScaleAtNatOriginGeoKey; psDefn->ProjParm[5] = dfFalseEasting; psDefn->ProjParmId[5] = ProjFalseEastingGeoKey; psDefn->ProjParm[6] = dfFalseNorthing; psDefn->ProjParmId[6] = ProjFalseNorthingGeoKey; psDefn->nParms = 7; break; /* -------------------------------------------------------------------- */ case CT_Mercator: /* -------------------------------------------------------------------- */ if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 ) dfNatOriginLong = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 ) dfNatOriginLat = 0.0; const int bHaveSP1 = GTIFKeyGetDOUBLE(psGTIF, ProjStdParallel1GeoKey, &dfStdParallel1, 0, 1 ); int bHaveNOS = GTIFKeyGetDOUBLE(psGTIF, ProjScaleAtNatOriginGeoKey, &dfNatOriginScale, 0, 1 ); /* Default scale only if dfStdParallel1 isn't defined either */ if( !bHaveNOS && !bHaveSP1) { bHaveNOS = TRUE; dfNatOriginScale = 1.0; } /* notdef: should transform to decimal degrees at this point */ psDefn->ProjParm[0] = dfNatOriginLat; psDefn->ProjParmId[0] = ProjNatOriginLatGeoKey; psDefn->ProjParm[1] = dfNatOriginLong; psDefn->ProjParmId[1] = ProjNatOriginLongGeoKey; if( bHaveSP1 ) { psDefn->ProjParm[2] = dfStdParallel1; psDefn->ProjParmId[2] = ProjStdParallel1GeoKey; } if( bHaveNOS ) { psDefn->ProjParm[4] = dfNatOriginScale; psDefn->ProjParmId[4] = ProjScaleAtNatOriginGeoKey; } psDefn->ProjParm[5] = dfFalseEasting; psDefn->ProjParmId[5] = ProjFalseEastingGeoKey; psDefn->ProjParm[6] = dfFalseNorthing; psDefn->ProjParmId[6] = ProjFalseNorthingGeoKey; psDefn->nParms = 7; break; /* -------------------------------------------------------------------- */ case CT_LambertConfConic_1SP: case CT_ObliqueStereographic: case CT_TransverseMercator: case CT_TransvMercator_SouthOriented: /* -------------------------------------------------------------------- */ if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 ) dfNatOriginLong = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 ) dfNatOriginLat = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjScaleAtNatOriginGeoKey, &dfNatOriginScale, 0, 1 ) == 0 /* See https://github.com/OSGeo/gdal/files/1665718/lasinfo.txt */ && GTIFKeyGetDOUBLE(psGTIF, ProjScaleAtCenterGeoKey, &dfNatOriginScale, 0, 1 ) == 0 ) dfNatOriginScale = 1.0; /* notdef: should transform to decimal degrees at this point */ psDefn->ProjParm[0] = dfNatOriginLat; psDefn->ProjParmId[0] = ProjNatOriginLatGeoKey; psDefn->ProjParm[1] = dfNatOriginLong; psDefn->ProjParmId[1] = ProjNatOriginLongGeoKey; psDefn->ProjParm[4] = dfNatOriginScale; psDefn->ProjParmId[4] = ProjScaleAtNatOriginGeoKey; psDefn->ProjParm[5] = dfFalseEasting; psDefn->ProjParmId[5] = ProjFalseEastingGeoKey; psDefn->ProjParm[6] = dfFalseNorthing; psDefn->ProjParmId[6] = ProjFalseNorthingGeoKey; psDefn->nParms = 7; break; /* -------------------------------------------------------------------- */ case CT_ObliqueMercator: /* hotine */ case CT_HotineObliqueMercatorAzimuthCenter: /* -------------------------------------------------------------------- */ if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 ) dfNatOriginLong = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 ) dfNatOriginLat = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjAzimuthAngleGeoKey, &dfAzimuth, 0, 1 ) == 0 ) dfAzimuth = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjRectifiedGridAngleGeoKey, &dfRectGridAngle, 0, 1 ) == 0 ) dfRectGridAngle = 90.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjScaleAtNatOriginGeoKey, &dfNatOriginScale, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjScaleAtCenterGeoKey, &dfNatOriginScale, 0, 1 ) == 0 ) dfNatOriginScale = 1.0; /* notdef: should transform to decimal degrees at this point */ psDefn->ProjParm[0] = dfNatOriginLat; psDefn->ProjParmId[0] = ProjCenterLatGeoKey; psDefn->ProjParm[1] = dfNatOriginLong; psDefn->ProjParmId[1] = ProjCenterLongGeoKey; psDefn->ProjParm[2] = dfAzimuth; psDefn->ProjParmId[2] = ProjAzimuthAngleGeoKey; psDefn->ProjParm[3] = dfRectGridAngle; psDefn->ProjParmId[3] = ProjRectifiedGridAngleGeoKey; psDefn->ProjParm[4] = dfNatOriginScale; psDefn->ProjParmId[4] = ProjScaleAtCenterGeoKey; psDefn->ProjParm[5] = dfFalseEasting; psDefn->ProjParmId[5] = ProjFalseEastingGeoKey; psDefn->ProjParm[6] = dfFalseNorthing; psDefn->ProjParmId[6] = ProjFalseNorthingGeoKey; psDefn->nParms = 7; break; /* -------------------------------------------------------------------- */ case CT_ObliqueMercator_Laborde: /* -------------------------------------------------------------------- */ if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 ) dfNatOriginLong = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 ) dfNatOriginLat = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjAzimuthAngleGeoKey, &dfAzimuth, 0, 1 ) == 0 ) dfAzimuth = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjScaleAtNatOriginGeoKey, &dfNatOriginScale, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjScaleAtCenterGeoKey, &dfNatOriginScale, 0, 1 ) == 0 ) dfNatOriginScale = 1.0; /* notdef: should transform to decimal degrees at this point */ psDefn->ProjParm[0] = dfNatOriginLat; psDefn->ProjParmId[0] = ProjCenterLatGeoKey; psDefn->ProjParm[1] = dfNatOriginLong; psDefn->ProjParmId[1] = ProjCenterLongGeoKey; psDefn->ProjParm[2] = dfAzimuth; psDefn->ProjParmId[2] = ProjAzimuthAngleGeoKey; psDefn->ProjParm[4] = dfNatOriginScale; psDefn->ProjParmId[4] = ProjScaleAtCenterGeoKey; psDefn->ProjParm[5] = dfFalseEasting; psDefn->ProjParmId[5] = ProjFalseEastingGeoKey; psDefn->ProjParm[6] = dfFalseNorthing; psDefn->ProjParmId[6] = ProjFalseNorthingGeoKey; psDefn->nParms = 7; break; /* -------------------------------------------------------------------- */ case CT_CassiniSoldner: case CT_Polyconic: /* -------------------------------------------------------------------- */ if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 ) dfNatOriginLong = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 ) dfNatOriginLat = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjScaleAtNatOriginGeoKey, &dfNatOriginScale, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjScaleAtCenterGeoKey, &dfNatOriginScale, 0, 1 ) == 0 ) dfNatOriginScale = 1.0; /* notdef: should transform to decimal degrees at this point */ psDefn->ProjParm[0] = dfNatOriginLat; psDefn->ProjParmId[0] = ProjNatOriginLatGeoKey; psDefn->ProjParm[1] = dfNatOriginLong; psDefn->ProjParmId[1] = ProjNatOriginLongGeoKey; psDefn->ProjParm[4] = dfNatOriginScale; psDefn->ProjParmId[4] = ProjScaleAtNatOriginGeoKey; psDefn->ProjParm[5] = dfFalseEasting; psDefn->ProjParmId[5] = ProjFalseEastingGeoKey; psDefn->ProjParm[6] = dfFalseNorthing; psDefn->ProjParmId[6] = ProjFalseNorthingGeoKey; psDefn->nParms = 7; break; /* -------------------------------------------------------------------- */ case CT_AzimuthalEquidistant: case CT_MillerCylindrical: case CT_Gnomonic: case CT_LambertAzimEqualArea: case CT_Orthographic: case CT_NewZealandMapGrid: /* -------------------------------------------------------------------- */ if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 ) dfNatOriginLong = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 ) dfNatOriginLat = 0.0; /* notdef: should transform to decimal degrees at this point */ psDefn->ProjParm[0] = dfNatOriginLat; psDefn->ProjParmId[0] = ProjCenterLatGeoKey; psDefn->ProjParm[1] = dfNatOriginLong; psDefn->ProjParmId[1] = ProjCenterLongGeoKey; psDefn->ProjParm[5] = dfFalseEasting; psDefn->ProjParmId[5] = ProjFalseEastingGeoKey; psDefn->ProjParm[6] = dfFalseNorthing; psDefn->ProjParmId[6] = ProjFalseNorthingGeoKey; psDefn->nParms = 7; break; /* -------------------------------------------------------------------- */ case CT_Equirectangular: /* -------------------------------------------------------------------- */ if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 ) dfNatOriginLong = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 ) dfNatOriginLat = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjStdParallel1GeoKey, &dfStdParallel1, 0, 1 ) == 0 ) dfStdParallel1 = 0.0; /* notdef: should transform to decimal degrees at this point */ psDefn->ProjParm[0] = dfNatOriginLat; psDefn->ProjParmId[0] = ProjCenterLatGeoKey; psDefn->ProjParm[1] = dfNatOriginLong; psDefn->ProjParmId[1] = ProjCenterLongGeoKey; psDefn->ProjParm[2] = dfStdParallel1; psDefn->ProjParmId[2] = ProjStdParallel1GeoKey; psDefn->ProjParm[5] = dfFalseEasting; psDefn->ProjParmId[5] = ProjFalseEastingGeoKey; psDefn->ProjParm[6] = dfFalseNorthing; psDefn->ProjParmId[6] = ProjFalseNorthingGeoKey; psDefn->nParms = 7; break; /* -------------------------------------------------------------------- */ case CT_Robinson: case CT_Sinusoidal: case CT_VanDerGrinten: /* -------------------------------------------------------------------- */ if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 ) dfNatOriginLong = 0.0; /* notdef: should transform to decimal degrees at this point */ psDefn->ProjParm[1] = dfNatOriginLong; psDefn->ProjParmId[1] = ProjCenterLongGeoKey; psDefn->ProjParm[5] = dfFalseEasting; psDefn->ProjParmId[5] = ProjFalseEastingGeoKey; psDefn->ProjParm[6] = dfFalseNorthing; psDefn->ProjParmId[6] = ProjFalseNorthingGeoKey; psDefn->nParms = 7; break; /* -------------------------------------------------------------------- */ case CT_PolarStereographic: /* -------------------------------------------------------------------- */ if( GTIFKeyGetDOUBLE(psGTIF, ProjStraightVertPoleLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 ) dfNatOriginLong = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 ) dfNatOriginLat = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjScaleAtNatOriginGeoKey, &dfNatOriginScale, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjScaleAtCenterGeoKey, &dfNatOriginScale, 0, 1 ) == 0 ) dfNatOriginScale = 1.0; /* notdef: should transform to decimal degrees at this point */ psDefn->ProjParm[0] = dfNatOriginLat; psDefn->ProjParmId[0] = ProjNatOriginLatGeoKey;; psDefn->ProjParm[1] = dfNatOriginLong; psDefn->ProjParmId[1] = ProjStraightVertPoleLongGeoKey; psDefn->ProjParm[4] = dfNatOriginScale; psDefn->ProjParmId[4] = ProjScaleAtNatOriginGeoKey; psDefn->ProjParm[5] = dfFalseEasting; psDefn->ProjParmId[5] = ProjFalseEastingGeoKey; psDefn->ProjParm[6] = dfFalseNorthing; psDefn->ProjParmId[6] = ProjFalseNorthingGeoKey; psDefn->nParms = 7; break; /* -------------------------------------------------------------------- */ case CT_LambertConfConic_2SP: /* -------------------------------------------------------------------- */ if( GTIFKeyGetDOUBLE(psGTIF, ProjStdParallel1GeoKey, &dfStdParallel1, 0, 1 ) == 0 ) dfStdParallel1 = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjStdParallel2GeoKey, &dfStdParallel2, 0, 1 ) == 0 ) dfStdParallel1 = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 ) dfNatOriginLong = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 ) dfNatOriginLat = 0.0; /* notdef: should transform to decimal degrees at this point */ psDefn->ProjParm[0] = dfNatOriginLat; psDefn->ProjParmId[0] = ProjFalseOriginLatGeoKey; psDefn->ProjParm[1] = dfNatOriginLong; psDefn->ProjParmId[1] = ProjFalseOriginLongGeoKey; psDefn->ProjParm[2] = dfStdParallel1; psDefn->ProjParmId[2] = ProjStdParallel1GeoKey; psDefn->ProjParm[3] = dfStdParallel2; psDefn->ProjParmId[3] = ProjStdParallel2GeoKey; psDefn->ProjParm[5] = dfFalseEasting; psDefn->ProjParmId[5] = ProjFalseEastingGeoKey; psDefn->ProjParm[6] = dfFalseNorthing; psDefn->ProjParmId[6] = ProjFalseNorthingGeoKey; psDefn->nParms = 7; break; /* -------------------------------------------------------------------- */ case CT_AlbersEqualArea: case CT_EquidistantConic: /* -------------------------------------------------------------------- */ if( GTIFKeyGetDOUBLE(psGTIF, ProjStdParallel1GeoKey, &dfStdParallel1, 0, 1 ) == 0 ) dfStdParallel1 = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjStdParallel2GeoKey, &dfStdParallel2, 0, 1 ) == 0 ) dfStdParallel2 = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 ) dfNatOriginLong = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLatGeoKey, &dfNatOriginLat, 0, 1 ) == 0 ) dfNatOriginLat = 0.0; /* notdef: should transform to decimal degrees at this point */ psDefn->ProjParm[0] = dfStdParallel1; psDefn->ProjParmId[0] = ProjStdParallel1GeoKey; psDefn->ProjParm[1] = dfStdParallel2; psDefn->ProjParmId[1] = ProjStdParallel2GeoKey; psDefn->ProjParm[2] = dfNatOriginLat; psDefn->ProjParmId[2] = ProjNatOriginLatGeoKey; psDefn->ProjParm[3] = dfNatOriginLong; psDefn->ProjParmId[3] = ProjNatOriginLongGeoKey; psDefn->ProjParm[5] = dfFalseEasting; psDefn->ProjParmId[5] = ProjFalseEastingGeoKey; psDefn->ProjParm[6] = dfFalseNorthing; psDefn->ProjParmId[6] = ProjFalseNorthingGeoKey; psDefn->nParms = 7; break; /* -------------------------------------------------------------------- */ case CT_CylindricalEqualArea: /* -------------------------------------------------------------------- */ if( GTIFKeyGetDOUBLE(psGTIF, ProjStdParallel1GeoKey, &dfStdParallel1, 0, 1 ) == 0 ) dfStdParallel1 = 0.0; if( GTIFKeyGetDOUBLE(psGTIF, ProjNatOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjFalseOriginLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 && GTIFKeyGetDOUBLE(psGTIF, ProjCenterLongGeoKey, &dfNatOriginLong, 0, 1 ) == 0 ) dfNatOriginLong = 0.0; /* notdef: should transform to decimal degrees at this point */ psDefn->ProjParm[0] = dfStdParallel1; psDefn->ProjParmId[0] = ProjStdParallel1GeoKey; psDefn->ProjParm[1] = dfNatOriginLong; psDefn->ProjParmId[1] = ProjNatOriginLongGeoKey; psDefn->ProjParm[5] = dfFalseEasting; psDefn->ProjParmId[5] = ProjFalseEastingGeoKey; psDefn->ProjParm[6] = dfFalseNorthing; psDefn->ProjParmId[6] = ProjFalseNorthingGeoKey; psDefn->nParms = 7; break; } for( int iParam = 0; iParam < psDefn->nParms; iParam++ ) { switch( psDefn->ProjParmId[iParam] ) { /* -------------------------------------------------------------------- */ /* Normalize any linear parameters into meters. In GeoTIFF */ /* the linear projection parameter tags are normally in the */ /* units of the coordinate system described. */ /* -------------------------------------------------------------------- */ case ProjFalseEastingGeoKey: case ProjFalseNorthingGeoKey: case ProjFalseOriginEastingGeoKey: case ProjFalseOriginNorthingGeoKey: case ProjCenterEastingGeoKey: case ProjCenterNorthingGeoKey: if( psDefn->UOMLengthInMeters != 0 && psDefn->UOMLengthInMeters != 1.0 ) { psDefn->ProjParm[iParam] *= psDefn->UOMLengthInMeters; } break; /* -------------------------------------------------------------------- */ /* Normalize any angular parameters into degrees. In GeoTIFF */ /* the angular projection parameter tags are normally in the */ /* units of GeogAngularUnit. Note: this conversion is only done */ /* since libgeotiff 1.7.4 */ /* -------------------------------------------------------------------- */ case ProjStdParallel1GeoKey: case ProjStdParallel2GeoKey: case ProjNatOriginLongGeoKey: case ProjNatOriginLatGeoKey: case ProjFalseOriginLongGeoKey: case ProjFalseOriginLatGeoKey: case ProjCenterLongGeoKey: case ProjCenterLatGeoKey: case ProjStraightVertPoleLongGeoKey: case ProjRectifiedGridAngleGeoKey: if( psDefn->UOMAngleInDegrees != 0 && psDefn->UOMAngleInDegrees != 1.0 ) { psDefn->ProjParm[iParam] *= psDefn->UOMAngleInDegrees; } break; default: break; } } } /************************************************************************/ /* GTIFGetDefn() */ /************************************************************************/ /** @param psGTIF GeoTIFF information handle as returned by GTIFNew. @param psDefn Pointer to an existing GTIFDefn structure allocated by GTIFAllocDefn(). @return TRUE if the function has been successful, otherwise FALSE. This function reads the coordinate system definition from a GeoTIFF file, and normalizes it into a set of component information using definitions from the EPSG database as provided by the PROJ library. This function is intended to simplify correct support for reading files with defined PCS (Projected Coordinate System) codes that wouldn't otherwise be directly known by application software by reducing it to the underlying projection method, parameters, datum, ellipsoid, prime meridian and units.

The application should pass a pointer to an existing uninitialized GTIFDefn structure, and GTIFGetDefn() will fill it in. The function currently always returns TRUE but in the future will return FALSE if the database is not found. In any event, all geokeys actually found in the file will be copied into the GTIFDefn. However, if the database isn't found, codes implied by other codes will not be set properly.

GTIFGetDefn() will not generally work if the EPSG derived database cannot be found.

The normalization methodology operates by fetching tags from the GeoTIFF file, and then setting all other tags implied by them in the structure. The implied relationships are worked out by reading definitions from the various EPSG derived database tables.

For instance, if a PCS (ProjectedCSTypeGeoKey) is found in the GeoTIFF file this code is used to lookup a record in the database. For example given the PCS 26746 we can find the name (NAD27 / California zone VI), the GCS 4257 (NAD27), and the ProjectionCode 10406 (California CS27 zone VI). The GCS, and ProjectionCode can in turn be looked up in other tables until all the details of units, ellipsoid, prime meridian, datum, projection (LambertConfConic_2SP) and projection parameters are established. A full listgeo dump of a file for this result might look like the following, all based on a single PCS value:

% listgeo -norm ~/data/geotiff/pci_eg/spaf27.tif
Geotiff_Information:
   Version: 1
   Key_Revision: 1.0
   Tagged_Information:
      ModelTiepointTag (2,3):
         0                0                0
         1577139.71       634349.176       0
      ModelPixelScaleTag (1,3):
         195.509321       198.32184        0
      End_Of_Tags.
   Keyed_Information:
      GTModelTypeGeoKey (Short,1): ModelTypeProjected
      GTRasterTypeGeoKey (Short,1): RasterPixelIsArea
      ProjectedCSTypeGeoKey (Short,1): PCS_NAD27_California_VI
      End_Of_Keys.
   End_Of_Geotiff.

PCS = 26746 (NAD27 / California zone VI)
Projection = 10406 (California CS27 zone VI)
Projection Method: CT_LambertConfConic_2SP
   ProjStdParallel1GeoKey: 33.883333
   ProjStdParallel2GeoKey: 32.766667
   ProjFalseOriginLatGeoKey: 32.166667
   ProjFalseOriginLongGeoKey: -116.233333
   ProjFalseEastingGeoKey: 609601.219202
   ProjFalseNorthingGeoKey: 0.000000
GCS: 4267/NAD27
Datum: 6267/North American Datum 1927
Ellipsoid: 7008/Clarke 1866 (6378206.40,6356583.80)
Prime Meridian: 8901/Greenwich (0.000000)
Projection Linear Units: 9003/US survey foot (0.304801m)
Note that GTIFGetDefn() does not inspect or return the tiepoints and scale. This must be handled separately as it normally would. It is intended to simplify capture and normalization of the coordinate system definition. Note that GTIFGetDefn() also does the following things:
  1. Convert all angular values to decimal degrees.
  2. Convert all linear values to meters.
  3. Return the linear units and conversion to meters for the tiepoints and scale (though the tiepoints and scale remain in their native units).
  4. When reading projection parameters a variety of differences between different GeoTIFF generators are handled, and a normalized set of parameters for each projection are always returned.
Code fields in the GTIFDefn are filled with KvUserDefined if there is not value to assign. The parameter lists for each of the underlying projection transform methods can be found at the Projections page. Note that nParms will be set based on the maximum parameter used. Some of the parameters may not be used in which case the GTIFDefn::ProjParmId[] will be zero. This is done to retain correspondence to the EPSG parameter numbering scheme.

The geotiff_proj4.c module distributed with libgeotiff can be used as an example of code that converts a GTIFDefn into another projection system.

@see GTIFKeySet() */ int GTIFGetDefn( GTIF * psGTIF, GTIFDefn * psDefn ) { if( !GTIFGetPROJContext(psGTIF, TRUE, NULL) ) { return FALSE; } /* -------------------------------------------------------------------- */ /* Initially we default all the information we can. */ /* -------------------------------------------------------------------- */ psDefn->DefnSet = 1; psDefn->Model = KvUserDefined; psDefn->PCS = KvUserDefined; psDefn->GCS = KvUserDefined; psDefn->UOMLength = KvUserDefined; psDefn->UOMLengthInMeters = 1.0; psDefn->UOMAngle = KvUserDefined; psDefn->UOMAngleInDegrees = 1.0; psDefn->Datum = KvUserDefined; psDefn->Ellipsoid = KvUserDefined; psDefn->SemiMajor = 0.0; psDefn->SemiMinor = 0.0; psDefn->PM = KvUserDefined; psDefn->PMLongToGreenwich = 0.0; #if !defined(GEO_NORMALIZE_DISABLE_TOWGS84) psDefn->TOWGS84Count = 0; memset( psDefn->TOWGS84, 0, sizeof(psDefn->TOWGS84) ); #endif psDefn->ProjCode = KvUserDefined; psDefn->Projection = KvUserDefined; psDefn->CTProjection = KvUserDefined; psDefn->nParms = 0; for( int i = 0; i < MAX_GTIF_PROJPARMS; i++ ) { psDefn->ProjParm[i] = 0.0; psDefn->ProjParmId[i] = 0; } psDefn->MapSys = KvUserDefined; psDefn->Zone = 0; /* -------------------------------------------------------------------- */ /* Do we have any geokeys? */ /* -------------------------------------------------------------------- */ { int nKeyCount = 0; int anVersion[3]; GTIFDirectoryInfo( psGTIF, anVersion, &nKeyCount ); if( nKeyCount == 0 ) { psDefn->DefnSet = 0; return FALSE; } } /* -------------------------------------------------------------------- */ /* Try to get the overall model type. */ /* -------------------------------------------------------------------- */ GTIFKeyGetSSHORT(psGTIF,GTModelTypeGeoKey,&(psDefn->Model)); /* -------------------------------------------------------------------- */ /* Extract the Geog units. */ /* -------------------------------------------------------------------- */ short nGeogUOMLinear = 9001; /* Linear_Meter */ if( GTIFKeyGetSSHORT(psGTIF, GeogLinearUnitsGeoKey, &nGeogUOMLinear) == 1 ) { psDefn->UOMLength = nGeogUOMLinear; } /* -------------------------------------------------------------------- */ /* Try to get a PCS. */ /* -------------------------------------------------------------------- */ if( GTIFKeyGetSSHORT(psGTIF,ProjectedCSTypeGeoKey, &(psDefn->PCS)) == 1 && psDefn->PCS != KvUserDefined ) { /* * Translate this into useful information. */ GTIFGetPCSInfoEx( psGTIF->pj_context, psDefn->PCS, NULL, &(psDefn->ProjCode), &(psDefn->UOMLength), &(psDefn->GCS) ); } /* -------------------------------------------------------------------- */ /* If we have the PCS code, but didn't find it in the database */ /* (likely because we can't find them) we will try some ``jiffy */ /* rules'' for UTM and state plane. */ /* -------------------------------------------------------------------- */ if( psDefn->PCS != KvUserDefined && psDefn->ProjCode == KvUserDefined ) { int nZone; int nGCS = psDefn->GCS; const int nMapSys = GTIFPCSToMapSys( psDefn->PCS, &nGCS, &nZone ); if( nMapSys != KvUserDefined ) { psDefn->ProjCode = (short) GTIFMapSysToProj( nMapSys, nZone ); psDefn->GCS = (short) nGCS; } } /* -------------------------------------------------------------------- */ /* If the Proj_ code is specified directly, use that. */ /* -------------------------------------------------------------------- */ if( psDefn->ProjCode == KvUserDefined ) GTIFKeyGetSSHORT(psGTIF, ProjectionGeoKey, &(psDefn->ProjCode)); if( psDefn->ProjCode != KvUserDefined ) { /* * We have an underlying projection transformation value. Look * this up. For a PCS of ``WGS 84 / UTM 11'' the transformation * would be Transverse Mercator, with a particular set of options. * The nProjTRFCode itself would correspond to the name * ``UTM zone 11N'', and doesn't include datum info. */ GTIFGetProjTRFInfoEx( psGTIF->pj_context, psDefn->ProjCode, NULL, &(psDefn->Projection), psDefn->ProjParm ); /* * Set the GeoTIFF identity of the parameters. */ psDefn->CTProjection = (short) EPSGProjMethodToCTProjMethod( psDefn->Projection, FALSE ); SetGTParamIds( EPSGProjMethodToCTProjMethod(psDefn->Projection, TRUE), psDefn->Projection, psDefn->ProjParmId, NULL); psDefn->nParms = 7; } /* -------------------------------------------------------------------- */ /* Try to get a GCS. If found, it will override any implied by */ /* the PCS. */ /* -------------------------------------------------------------------- */ GTIFKeyGetSSHORT(psGTIF, GeographicTypeGeoKey, &(psDefn->GCS)); if( psDefn->GCS < 1 || psDefn->GCS >= KvUserDefined ) psDefn->GCS = KvUserDefined; /* -------------------------------------------------------------------- */ /* Derive the datum, and prime meridian from the GCS. */ /* -------------------------------------------------------------------- */ if( psDefn->GCS != KvUserDefined ) { GTIFGetGCSInfoEx( psGTIF->pj_context, psDefn->GCS, NULL, &(psDefn->Datum), &(psDefn->PM), &(psDefn->UOMAngle) ); } /* -------------------------------------------------------------------- */ /* Handle the GCS angular units. GeogAngularUnitsGeoKey */ /* overrides the GCS or PCS setting. */ /* -------------------------------------------------------------------- */ GTIFKeyGetSSHORT(psGTIF, GeogAngularUnitsGeoKey, &(psDefn->UOMAngle)); if( psDefn->UOMAngle != KvUserDefined ) { GTIFGetUOMAngleInfoEx( psGTIF->pj_context, psDefn->UOMAngle, NULL, &(psDefn->UOMAngleInDegrees) ); } /* -------------------------------------------------------------------- */ /* Check for a datum setting, and then use the datum to derive */ /* an ellipsoid. */ /* -------------------------------------------------------------------- */ GTIFKeyGetSSHORT(psGTIF, GeogGeodeticDatumGeoKey, &(psDefn->Datum)); if( psDefn->Datum != KvUserDefined ) { GTIFGetDatumInfoEx( psGTIF->pj_context, psDefn->Datum, NULL, &(psDefn->Ellipsoid) ); } /* -------------------------------------------------------------------- */ /* Check for an explicit ellipsoid. Use the ellipsoid to */ /* derive the ellipsoid characteristics, if possible. */ /* -------------------------------------------------------------------- */ GTIFKeyGetSSHORT(psGTIF, GeogEllipsoidGeoKey, &(psDefn->Ellipsoid)); if( psDefn->Ellipsoid != KvUserDefined ) { GTIFGetEllipsoidInfoEx( psGTIF->pj_context, psDefn->Ellipsoid, NULL, &(psDefn->SemiMajor), &(psDefn->SemiMinor) ); } /* -------------------------------------------------------------------- */ /* Check for overridden ellipsoid parameters. It would be nice */ /* to warn if they conflict with provided information, but for */ /* now we just override. */ /* -------------------------------------------------------------------- */ CPL_IGNORE_RET_VAL_INT(GTIFKeyGetDOUBLE(psGTIF, GeogSemiMajorAxisGeoKey, &(psDefn->SemiMajor), 0, 1 )); CPL_IGNORE_RET_VAL_INT(GTIFKeyGetDOUBLE(psGTIF, GeogSemiMinorAxisGeoKey, &(psDefn->SemiMinor), 0, 1 )); double dfInvFlattening; if( GTIFKeyGetDOUBLE(psGTIF, GeogInvFlatteningGeoKey, &dfInvFlattening, 0, 1 ) == 1 ) { if( dfInvFlattening != 0.0 ) psDefn->SemiMinor = psDefn->SemiMajor * (1 - 1.0/dfInvFlattening); else psDefn->SemiMinor = psDefn->SemiMajor; } /* -------------------------------------------------------------------- */ /* Get the prime meridian info. */ /* -------------------------------------------------------------------- */ GTIFKeyGetSSHORT(psGTIF, GeogPrimeMeridianGeoKey, &(psDefn->PM)); if( psDefn->PM != KvUserDefined ) { GTIFGetPMInfoEx( psGTIF->pj_context, psDefn->PM, NULL, &(psDefn->PMLongToGreenwich) ); } else { CPL_IGNORE_RET_VAL_INT(GTIFKeyGetDOUBLE(psGTIF, GeogPrimeMeridianLongGeoKey, &(psDefn->PMLongToGreenwich), 0, 1 )); psDefn->PMLongToGreenwich = GTIFAngleToDD( psDefn->PMLongToGreenwich, psDefn->UOMAngle ); } /* -------------------------------------------------------------------- */ /* Get the TOWGS84 parameters. */ /* -------------------------------------------------------------------- */ #if !defined(GEO_NORMALIZE_DISABLE_TOWGS84) psDefn->TOWGS84Count = (short)GTIFKeyGetDOUBLE(psGTIF, GeogTOWGS84GeoKey, psDefn->TOWGS84, 0, 7 ); #endif /* -------------------------------------------------------------------- */ /* Have the projection units of measure been overridden? We */ /* should likely be doing something about angular units too, */ /* but these are very rarely not decimal degrees for actual */ /* file coordinates. */ /* -------------------------------------------------------------------- */ GTIFKeyGetSSHORT(psGTIF,ProjLinearUnitsGeoKey,&(psDefn->UOMLength)); if( psDefn->UOMLength != KvUserDefined ) { GTIFGetUOMLengthInfoEx( psGTIF->pj_context, psDefn->UOMLength, NULL, &(psDefn->UOMLengthInMeters) ); } else { CPL_IGNORE_RET_VAL_INT(GTIFKeyGetDOUBLE(psGTIF,ProjLinearUnitSizeGeoKey,&(psDefn->UOMLengthInMeters),0,1)); } /* -------------------------------------------------------------------- */ /* Handle a variety of user defined transform types. */ /* -------------------------------------------------------------------- */ if( GTIFKeyGetSSHORT(psGTIF,ProjCoordTransGeoKey, &(psDefn->CTProjection)) == 1) { GTIFFetchProjParms( psGTIF, psDefn ); } /* -------------------------------------------------------------------- */ /* Try to set the zoned map system information. */ /* -------------------------------------------------------------------- */ psDefn->MapSys = GTIFProjToMapSys( psDefn->ProjCode, &(psDefn->Zone) ); /* -------------------------------------------------------------------- */ /* If this is UTM, and we were unable to extract the projection */ /* parameters from the database just set them directly now, */ /* since it's pretty easy, and a common case. */ /* -------------------------------------------------------------------- */ if( (psDefn->MapSys == MapSys_UTM_North || psDefn->MapSys == MapSys_UTM_South) && psDefn->CTProjection == KvUserDefined ) { psDefn->CTProjection = CT_TransverseMercator; psDefn->nParms = 7; psDefn->ProjParmId[0] = ProjNatOriginLatGeoKey; psDefn->ProjParm[0] = 0.0; psDefn->ProjParmId[1] = ProjNatOriginLongGeoKey; psDefn->ProjParm[1] = psDefn->Zone*6 - 183.0; psDefn->ProjParmId[4] = ProjScaleAtNatOriginGeoKey; psDefn->ProjParm[4] = 0.9996; psDefn->ProjParmId[5] = ProjFalseEastingGeoKey; psDefn->ProjParm[5] = 500000.0; psDefn->ProjParmId[6] = ProjFalseNorthingGeoKey; if( psDefn->MapSys == MapSys_UTM_North ) psDefn->ProjParm[6] = 0.0; else psDefn->ProjParm[6] = 10000000.0; } return TRUE; } /************************************************************************/ /* GTIFDecToDMS() */ /* */ /* Convenient function to translate decimal degrees to DMS */ /* format for reporting to a user. */ /************************************************************************/ const char *GTIFDecToDMS( double dfAngle, const char * pszAxis, int nPrecision ) { if( !(dfAngle >= -360 && dfAngle <= 360) ) return ""; double dfRound = 0.5/60; for( int i = 0; i < nPrecision; i++ ) dfRound = dfRound * 0.1; int nDegrees = (int) ABS(dfAngle); int nMinutes = (int) ((ABS(dfAngle) - nDegrees) * 60 + dfRound); if( nMinutes == 60 ) { nDegrees ++; nMinutes = 0; } const double dfSeconds = ABS((ABS(dfAngle) * 3600 - nDegrees*3600 - nMinutes*60)); const char *pszHemisphere = NULL; if( EQUAL(pszAxis,"Long") && dfAngle < 0.0 ) pszHemisphere = "W"; else if( EQUAL(pszAxis,"Long") ) pszHemisphere = "E"; else if( dfAngle < 0.0 ) pszHemisphere = "S"; else pszHemisphere = "N"; char szFormat[30]; snprintf(szFormat, sizeof(szFormat), "%%3dd%%2d\'%%%d.%df\"%s", nPrecision+3, nPrecision, pszHemisphere); static char szBuffer[50]; snprintf( szBuffer, sizeof(szBuffer), szFormat, nDegrees, nMinutes, dfSeconds); return szBuffer; } /************************************************************************/ /* GTIFPrintDefn() */ /* */ /* Report the contents of a GTIFDefn structure ... mostly for */ /* debugging. */ /************************************************************************/ void GTIFPrintDefnEx( GTIF *psGTIF, GTIFDefn * psDefn, FILE * fp ) { GTIFGetPROJContext(psGTIF, TRUE, NULL); /* -------------------------------------------------------------------- */ /* Do we have anything to report? */ /* -------------------------------------------------------------------- */ if( !psDefn->DefnSet ) { fprintf( fp, "No GeoKeys found.\n" ); return; } /* -------------------------------------------------------------------- */ /* Get the PCS name if possible. */ /* -------------------------------------------------------------------- */ if( psDefn->PCS != KvUserDefined ) { char *pszPCSName = NULL; if( psGTIF->pj_context ) { GTIFGetPCSInfoEx( psGTIF->pj_context, psDefn->PCS, &pszPCSName, NULL, NULL, NULL ); } if( pszPCSName == NULL ) pszPCSName = CPLStrdup("name unknown"); fprintf( fp, "PCS = %d (%s)\n", psDefn->PCS, pszPCSName ); CPLFree( pszPCSName ); } /* -------------------------------------------------------------------- */ /* Dump the projection code if possible. */ /* -------------------------------------------------------------------- */ if( psDefn->ProjCode != KvUserDefined ) { char *pszTRFName = NULL; if( psGTIF->pj_context ) { GTIFGetProjTRFInfoEx( psGTIF->pj_context, psDefn->ProjCode, &pszTRFName, NULL, NULL ); } if( pszTRFName == NULL ) pszTRFName = CPLStrdup(""); fprintf( fp, "Projection = %d (%s)\n", psDefn->ProjCode, pszTRFName ); CPLFree( pszTRFName ); } /* -------------------------------------------------------------------- */ /* Try to dump the projection method name, and parameters if possible.*/ /* -------------------------------------------------------------------- */ if( psDefn->CTProjection != KvUserDefined ) { const char *pszProjectionMethodName = GTIFValueNameEx(psGTIF, ProjCoordTransGeoKey, psDefn->CTProjection); if( pszProjectionMethodName == NULL ) pszProjectionMethodName = "(unknown)"; fprintf( fp, "Projection Method: %s\n", pszProjectionMethodName ); for( int i = 0; i < psDefn->nParms; i++ ) { if( psDefn->ProjParmId[i] == 0 ) continue; char* pszName = GTIFKeyName((geokey_t) psDefn->ProjParmId[i]); if( pszName == NULL ) pszName = "(unknown)"; if( i < 4 ) { char *pszAxisName; if( strstr(pszName,"Long") != NULL ) pszAxisName = "Long"; else if( strstr(pszName,"Lat") != NULL ) pszAxisName = "Lat"; else pszAxisName = "?"; fprintf( fp, " %s: %f (%s)\n", pszName, psDefn->ProjParm[i], GTIFDecToDMS( psDefn->ProjParm[i], pszAxisName, 2 ) ); } else if( i == 4 ) fprintf( fp, " %s: %f\n", pszName, psDefn->ProjParm[i] ); else fprintf( fp, " %s: %f m\n", pszName, psDefn->ProjParm[i] ); } } /* -------------------------------------------------------------------- */ /* Report the GCS name, and number. */ /* -------------------------------------------------------------------- */ if( psDefn->GCS != KvUserDefined ) { char *pszName = NULL; if( psGTIF->pj_context ) { GTIFGetGCSInfoEx( psGTIF->pj_context, psDefn->GCS, &pszName, NULL, NULL, NULL ); } if( pszName == NULL ) pszName = CPLStrdup("(unknown)"); fprintf( fp, "GCS: %d/%s\n", psDefn->GCS, pszName ); CPLFree( pszName ); } /* -------------------------------------------------------------------- */ /* Report the datum name. */ /* -------------------------------------------------------------------- */ if( psDefn->Datum != KvUserDefined ) { char *pszName = NULL; if( psGTIF->pj_context ) { GTIFGetDatumInfoEx( psGTIF->pj_context, psDefn->Datum, &pszName, NULL ); } if( pszName == NULL ) pszName = CPLStrdup("(unknown)"); fprintf( fp, "Datum: %d/%s\n", psDefn->Datum, pszName ); CPLFree( pszName ); } /* -------------------------------------------------------------------- */ /* Report the ellipsoid. */ /* -------------------------------------------------------------------- */ if( psDefn->Ellipsoid != KvUserDefined ) { char *pszName = NULL; if( psGTIF->pj_context ) { GTIFGetEllipsoidInfoEx( psGTIF->pj_context, psDefn->Ellipsoid, &pszName, NULL, NULL ); } if( pszName == NULL ) pszName = CPLStrdup("(unknown)"); fprintf( fp, "Ellipsoid: %d/%s (%.2f,%.2f)\n", psDefn->Ellipsoid, pszName, psDefn->SemiMajor, psDefn->SemiMinor ); CPLFree( pszName ); } /* -------------------------------------------------------------------- */ /* Report the prime meridian. */ /* -------------------------------------------------------------------- */ if( psDefn->PM != KvUserDefined ) { char *pszName = NULL; if( psGTIF->pj_context ) { GTIFGetPMInfoEx( psGTIF->pj_context, psDefn->PM, &pszName, NULL ); } if( pszName == NULL ) pszName = CPLStrdup("(unknown)"); fprintf( fp, "Prime Meridian: %d/%s (%f/%s)\n", psDefn->PM, pszName, psDefn->PMLongToGreenwich, GTIFDecToDMS( psDefn->PMLongToGreenwich, "Long", 2 ) ); CPLFree( pszName ); } /* -------------------------------------------------------------------- */ /* Report TOWGS84 parameters. */ /* -------------------------------------------------------------------- */ #if !defined(GEO_NORMALIZE_DISABLE_TOWGS84) if( psDefn->TOWGS84Count > 0 ) { fprintf( fp, "TOWGS84: " ); for( int i = 0; i < psDefn->TOWGS84Count; i++ ) { if( i > 0 ) fprintf( fp, "," ); fprintf( fp, "%g", psDefn->TOWGS84[i] ); } fprintf( fp, "\n" ); } #endif /* -------------------------------------------------------------------- */ /* Report the projection units of measure (currently just */ /* linear). */ /* -------------------------------------------------------------------- */ if( psDefn->UOMLength != KvUserDefined ) { char *pszName = NULL; if( psGTIF->pj_context ) { GTIFGetUOMLengthInfoEx( psGTIF->pj_context, psDefn->UOMLength, &pszName, NULL ); } if( pszName == NULL ) pszName = CPLStrdup( "(unknown)" ); fprintf( fp, "Projection Linear Units: %d/%s (%fm)\n", psDefn->UOMLength, pszName, psDefn->UOMLengthInMeters ); CPLFree( pszName ); } else { fprintf( fp, "Projection Linear Units: User-Defined (%fm)\n", psDefn->UOMLengthInMeters ); } } void GTIFPrintDefn( GTIFDefn * psDefn, FILE * fp ) { GTIF *psGTIF = GTIFNew(NULL); if( psGTIF ) { GTIFPrintDefnEx(psGTIF, psDefn, fp); GTIFFree(psGTIF); } } /************************************************************************/ /* GTIFFreeMemory() */ /* */ /* Externally visible function to free memory allocated within */ /* geo_normalize.c. */ /************************************************************************/ void GTIFFreeMemory( char * pMemory ) { if( pMemory != NULL ) VSIFree( pMemory ); } /************************************************************************/ /* GTIFAllocDefn() */ /* */ /* This allocates a GTIF structure in such a way that the */ /* calling application doesn't need to know the size and */ /* initializes it appropriately. */ /************************************************************************/ GTIFDefn *GTIFAllocDefn() { return (GTIFDefn *) CPLCalloc(sizeof(GTIFDefn),1); } /************************************************************************/ /* GTIFFreeDefn() */ /* */ /* Free a GTIF structure allocated by GTIFAllocDefn(). */ /************************************************************************/ void GTIFFreeDefn( GTIFDefn *defn ) { VSIFree( defn ); } /************************************************************************/ /* GTIFAttachPROJContext() */ /* */ /* Attach an existing PROJ context to the GTIF handle, but */ /* ownership of the context remains to the caller. */ /************************************************************************/ void GTIFAttachPROJContext( GTIF *psGTIF, void* pjContext ) { if( psGTIF->own_pj_context ) { proj_context_destroy(psGTIF->pj_context); } psGTIF->own_pj_context = FALSE; psGTIF->pj_context = (PJ_CONTEXT*) pjContext; } /************************************************************************/ /* GTIFGetPROJContext() */ /* */ /* Return the PROJ context attached to the GTIF handle. */ /* If it has not yet been instantiated and instantiateIfNeeded=TRUE*/ /* then, it will be instantiated (and owned by GTIF handle). */ /************************************************************************/ void *GTIFGetPROJContext( GTIF *psGTIF, int instantiateIfNeeded, int* out_gtif_own_pj_context ) { if( psGTIF->pj_context || !instantiateIfNeeded ) { if( out_gtif_own_pj_context ) { *out_gtif_own_pj_context = psGTIF->own_pj_context; } return psGTIF->pj_context; } psGTIF->pj_context = proj_context_create(); psGTIF->own_pj_context = psGTIF->pj_context != NULL; if( out_gtif_own_pj_context ) { *out_gtif_own_pj_context = psGTIF->own_pj_context; } return psGTIF->pj_context; } void GTIFDeaccessCSV( void ) { /* No operation */ } #ifndef GDAL_COMPILATION void SetCSVFilenameHook( const char *(*CSVFileOverride)(const char *) ) { (void)CSVFileOverride; /* No operation */ } #endif libgeotiff-1.7.4/epsg_gcs.inc0000664000175000017500000001347014020740032013042 00000000000000/* * EPSG/POSC GCS Codes -- GeoTIFF Rev. 0.2 */ /* C database for Geotiff include files. */ /* the macro ValuePair() must be defined */ /* by the enclosing include file */ #ifdef INCLUDE_OLD_CODES #include old_gcs.inc #endif /* OLD Codes */ /* Unspecified GCS based on ellipsoid */ ValuePair(GCSE_Airy1830, 4001) ValuePair(GCSE_AiryModified1849, 4002) ValuePair(GCSE_AustralianNationalSpheroid, 4003) ValuePair(GCSE_Bessel1841, 4004) ValuePair(GCSE_BesselModified, 4005) ValuePair(GCSE_BesselNamibia, 4006) ValuePair(GCSE_Clarke1858, 4007) ValuePair(GCSE_Clarke1866, 4008) ValuePair(GCSE_Clarke1866Michigan, 4009) ValuePair(GCSE_Clarke1880_Benoit, 4010) ValuePair(GCSE_Clarke1880_IGN, 4011) ValuePair(GCSE_Clarke1880_RGS, 4012) ValuePair(GCSE_Clarke1880_Arc, 4013) ValuePair(GCSE_Clarke1880_SGA1922, 4014) ValuePair(GCSE_Everest1830_1937Adjustment, 4015) ValuePair(GCSE_Everest1830_1967Definition, 4016) ValuePair(GCSE_Everest1830_1975Definition, 4017) ValuePair(GCSE_Everest1830Modified, 4018) ValuePair(GCSE_GRS1980, 4019) ValuePair(GCSE_Helmert1906, 4020) ValuePair(GCSE_IndonesianNationalSpheroid, 4021) ValuePair(GCSE_International1924, 4022) ValuePair(GCSE_International1967, 4023) ValuePair(GCSE_Krassowsky1940, 4024) ValuePair(GCSE_NWL9D, 4025) ValuePair(GCSE_NWL10D, 4026) ValuePair(GCSE_Plessis1817, 4027) ValuePair(GCSE_Struve1860, 4028) ValuePair(GCSE_WarOffice, 4029) ValuePair(GCSE_WGS84, 4030) ValuePair(GCSE_GEM10C, 4031) ValuePair(GCSE_OSU86F, 4032) ValuePair(GCSE_OSU91A, 4033) ValuePair(GCSE_Clarke1880, 4034) ValuePair(GCSE_Sphere, 4035) /* New GCS */ ValuePair(GCS_Greek,4120) ValuePair(GCS_GGRS87,4121) ValuePair(GCS_KKJ,4123) ValuePair(GCS_RT90,4124) ValuePair(GCS_EST92,4133) ValuePair(GCS_Dealul_Piscului_1970,4317) ValuePair(GCS_Greek_Athens,4815) /* Standard GCS */ ValuePair(GCS_Adindan, 4201) ValuePair(GCS_AGD66, 4202) ValuePair(GCS_AGD84, 4203) ValuePair(GCS_Ain_el_Abd, 4204) ValuePair(GCS_Afgooye, 4205) ValuePair(GCS_Agadez, 4206) ValuePair(GCS_Lisbon, 4207) ValuePair(GCS_Aratu, 4208) ValuePair(GCS_Arc_1950, 4209) ValuePair(GCS_Arc_1960, 4210) ValuePair(GCS_Batavia, 4211) ValuePair(GCS_Barbados, 4212) ValuePair(GCS_Beduaram, 4213) ValuePair(GCS_Beijing_1954, 4214) ValuePair(GCS_Belge_1950, 4215) ValuePair(GCS_Bermuda_1957, 4216) ValuePair(GCS_Bern_1898, 4217) ValuePair(GCS_Bogota, 4218) ValuePair(GCS_Bukit_Rimpah, 4219) ValuePair(GCS_Camacupa, 4220) ValuePair(GCS_Campo_Inchauspe, 4221) ValuePair(GCS_Cape, 4222) ValuePair(GCS_Carthage, 4223) ValuePair(GCS_Chua, 4224) ValuePair(GCS_Corrego_Alegre, 4225) ValuePair(GCS_Cote_d_Ivoire, 4226) ValuePair(GCS_Deir_ez_Zor, 4227) ValuePair(GCS_Douala, 4228) ValuePair(GCS_Egypt_1907, 4229) ValuePair(GCS_ED50, 4230) ValuePair(GCS_ED87, 4231) ValuePair(GCS_Fahud, 4232) ValuePair(GCS_Gandajika_1970, 4233) ValuePair(GCS_Garoua, 4234) ValuePair(GCS_Guyane_Francaise, 4235) ValuePair(GCS_Hu_Tzu_Shan, 4236) ValuePair(GCS_HD72, 4237) ValuePair(GCS_ID74, 4238) ValuePair(GCS_Indian_1954, 4239) ValuePair(GCS_Indian_1975, 4240) ValuePair(GCS_Jamaica_1875, 4241) ValuePair(GCS_JAD69, 4242) ValuePair(GCS_Kalianpur, 4243) ValuePair(GCS_Kandawala, 4244) ValuePair(GCS_Kertau, 4245) ValuePair(GCS_KOC, 4246) ValuePair(GCS_La_Canoa, 4247) ValuePair(GCS_PSAD56, 4248) ValuePair(GCS_Lake, 4249) ValuePair(GCS_Leigon, 4250) ValuePair(GCS_Liberia_1964, 4251) ValuePair(GCS_Lome, 4252) ValuePair(GCS_Luzon_1911, 4253) ValuePair(GCS_Hito_XVIII_1963, 4254) ValuePair(GCS_Herat_North, 4255) ValuePair(GCS_Mahe_1971, 4256) ValuePair(GCS_Makassar, 4257) ValuePair(GCS_EUREF89, 4258) ValuePair(GCS_Malongo_1987, 4259) ValuePair(GCS_Manoca, 4260) ValuePair(GCS_Merchich, 4261) ValuePair(GCS_Massawa, 4262) ValuePair(GCS_Minna, 4263) ValuePair(GCS_Mhast, 4264) ValuePair(GCS_Monte_Mario, 4265) ValuePair(GCS_M_poraloko, 4266) ValuePair(GCS_NAD27, 4267) ValuePair(GCS_NAD_Michigan, 4268) ValuePair(GCS_NAD83, 4269) ValuePair(GCS_Nahrwan_1967, 4270) ValuePair(GCS_Naparima_1972, 4271) ValuePair(GCS_GD49, 4272) ValuePair(GCS_NGO_1948, 4273) ValuePair(GCS_Datum_73, 4274) ValuePair(GCS_NTF, 4275) ValuePair(GCS_NSWC_9Z_2, 4276) ValuePair(GCS_OSGB_1936, 4277) ValuePair(GCS_OSGB70, 4278) ValuePair(GCS_OS_SN80, 4279) ValuePair(GCS_Padang, 4280) ValuePair(GCS_Palestine_1923, 4281) ValuePair(GCS_Pointe_Noire, 4282) ValuePair(GCS_GDA94, 4283) ValuePair(GCS_Pulkovo_1942, 4284) ValuePair(GCS_Qatar, 4285) ValuePair(GCS_Qatar_1948, 4286) ValuePair(GCS_Qornoq, 4287) ValuePair(GCS_Loma_Quintana, 4288) ValuePair(GCS_Amersfoort, 4289) ValuePair(GCS_RT38, 4290) ValuePair(GCS_SAD69, 4291) ValuePair(GCS_Sapper_Hill_1943, 4292) ValuePair(GCS_Schwarzeck, 4293) ValuePair(GCS_Segora, 4294) ValuePair(GCS_Serindung, 4295) ValuePair(GCS_Sudan, 4296) ValuePair(GCS_Tananarive, 4297) ValuePair(GCS_Timbalai_1948, 4298) ValuePair(GCS_TM65, 4299) ValuePair(GCS_TM75, 4300) ValuePair(GCS_Tokyo, 4301) ValuePair(GCS_Trinidad_1903, 4302) ValuePair(GCS_TC_1948, 4303) ValuePair(GCS_Voirol_1875, 4304) ValuePair(GCS_Voirol_Unifie, 4305) ValuePair(GCS_Bern_1938, 4306) ValuePair(GCS_Nord_Sahara_1959, 4307) ValuePair(GCS_Stockholm_1938, 4308) ValuePair(GCS_Yacare, 4309) ValuePair(GCS_Yoff, 4310) ValuePair(GCS_Zanderij, 4311) ValuePair(GCS_MGI, 4312) ValuePair(GCS_Belge_1972, 4313) ValuePair(GCS_DHDN, 4314) ValuePair(GCS_Conakry_1905, 4315) ValuePair(GCS_WGS_72, 4322) ValuePair(GCS_WGS_72BE, 4324) ValuePair(GCS_WGS_84, 4326) ValuePair(GCS_Bern_1898_Bern, 4801) ValuePair(GCS_Bogota_Bogota, 4802) ValuePair(GCS_Lisbon_Lisbon, 4803) ValuePair(GCS_Makassar_Jakarta, 4804) ValuePair(GCS_MGI_Ferro, 4805) ValuePair(GCS_Monte_Mario_Rome, 4806) ValuePair(GCS_NTF_Paris, 4807) ValuePair(GCS_Padang_Jakarta, 4808) ValuePair(GCS_Belge_1950_Brussels, 4809) ValuePair(GCS_Tananarive_Paris, 4810) ValuePair(GCS_Voirol_1875_Paris, 4811) ValuePair(GCS_Voirol_Unifie_Paris, 4812) ValuePair(GCS_Batavia_Jakarta, 4813) ValuePair(GCS_ATF_Paris, 4901) ValuePair(GCS_NDG_Paris, 4902) /* End of list */ libgeotiff-1.7.4/man/0000775000175000017500000000000014755113373011424 500000000000000libgeotiff-1.7.4/man/man1/0000775000175000017500000000000014755113373012260 500000000000000libgeotiff-1.7.4/man/man1/geotifcp.10000664000175000017500000000743014020740032014045 00000000000000\" TITLE: libgeotiff Man Pages \" AUTHOR: Bas Couwenberg \" .if \n(.g .ds T< \\FC .if \n(.g .ds T> \\F[\n[.fam]] .TH GEOTIFCP "1" "August 2016" "libgeotiff 1.4.1" "libgeotiff Manual Pages" .SH NAME geotifcp \- Copy TIFF with updated GeoTIFF Metadata .SH SYNOPSIS .B geotifcp [\fIoptions\fR] [\fB-e\fR \fIesri_worldfile\fR] [\fB-g\fR \fImetadata\fR] \fIinput\fR \fIoutput\fR .SH DESCRIPTION .PP \fBgeotifcp\fR is identical in function to the LIBTIFF program \fBtiffcp\fR, with the additional feature that if the "\*(T<\fB\-g\fR\*(T>" option is used the GeoTIFF information from the file will be installed into the output file. The "\*(T<\fB\-e\fR\*(T> \fIworldfile\fR" option will override the tiepoint and scale information from the metadata file based on the contents of the ESRI worldfile. .PP If the "\*(T<\fB\-g\fR\*(T>" option is not used the geotiff information from the source file is preserved in the new output file. .PP "\fBgeotifcp\fR" inherits all the other file-transformation capabilities of the \fBtiffcp\fR program; for help on the additional parameters give the command: .nf \*(T< % geotifcp \-h \*(T> .fi .PP The metadata format is the same as is described in the \fBlistgeo\fR(1) program. Normally metadata files for use with \fBgeotifcp\fR are generated from a similar file with \fBlistgeo\fR, and then modified by hand as required. .SH OPTIONS .TP \*(T<\fB\-g\fR\*(T> \fIfile\fR install GeoTIFF metadata from \fIfile\fR .TP \*(T<\fB\-4\fR\*(T> \fIproj4_str\fR install GeoTIFF metadata from proj4 string .TP \*(T<\fB\-e\fR\*(T> \fIfile\fR install positioning info from ESRI Worldfile \fIfile\fR .TP \*(T<\fB\-a\fR\*(T> append to output instead of overwriting .TP \*(T<\fB\-8\fR\*(T> write BigTIFF instead of default ClassicTIFF .TP \*(T<\fB\-o\fR\*(T> \fIoffset\fR set initial directory offset .TP \*(T<\fB\-p\fR\*(T> \*(T pack samples contiguously (e.g. RGBRGB...) .TP \*(T<\fB\-p\fR\*(T> \*(T store samples separately (e.g. RRR...GGG...BBB...) .TP \*(T<\fB\-s\fR\*(T> write output in strips .TP \*(T<\fB\-t\fR\*(T> write output in tiles .TP \*(T<\fB\-i\fR\*(T> ignore read errors .TP \*(T<\fB\-d\fR\*(T> truncate 8 bitspersample to 4bitspersample .TP \*(T<\fB\-r\fR\*(T> \fI#\fR make each strip have no more than \fI#\fR rows .TP \*(T<\fB\-w\fR\*(T> \fI#\fR set output tile width (pixels) .TP \*(T<\fB\-l\fR\*(T> \fI#\fR set output tile length (pixels) .TP \*(T<\fB\-f\fR\*(T> \*(T force lsb-to-msb FillOrder for output .TP \*(T<\fB\-f\fR\*(T> \*(T force msb-to-lsb FillOrder for output .TP \*(T<\fB\-c\fR\*(T> lzw[:opts] compress output with Lempel-Ziv & Welch encoding .TP \*(T<\fB\-c\fR\*(T> zip[:opts] compress output with deflate encoding .TP \*(T<\fB\-c\fR\*(T> jpeg[:opts] compress output with JPEG encoding .TP \*(T<\fB\-c\fR\*(T> packbits compress output with packbits encoding .TP \*(T<\fB\-c\fR\*(T> g3[:opts] compress output with CCITT Group 3 encoding .TP \*(T<\fB\-c\fR\*(T> g4 compress output with CCITT Group 4 encoding .TP \*(T<\fB\-c\fR\*(T> none use no compression algorithm on output .PP Group 3 options: .TP \*(T<\fB1d\fR\*(T> use default CCITT Group 3 1D-encoding .TP \*(T<\fB2d\fR\*(T> use optional CCITT Group 3 2D-encoding .TP \*(T<\fBfill\fR\*(T> byte-align EOL codes .PP For example, \*(T<\fB\-c\fR\*(T> g3:2d:fill to get G3-2D-encoded data with byte-aligned EOLs .PP JPEG options: .TP \*(T<\fB#\fR\*(T> set compression quality level (0-100, default 75) .TP \*(T<\fBr\fR\*(T> output color image as RGB rather than YCbCr .PP For example, \*(T<\fB\-c\fR\*(T> jpeg:r:50 to get JPEG-encoded RGB data with 50% comp. quality .PP LZW and deflate options: .TP \*(T<\fB#\fR\*(T> set predictor value .PP For example, \*(T<\fB\-c\fR\*(T> lzw:2 to get LZW-encoded data with horizontal differencing .SH "SEE ALSO" .BR applygeo (1) .BR listgeo (1) libgeotiff-1.7.4/man/man1/applygeo.10000664000175000017500000000122114020740032014055 00000000000000\" TITLE: applygeo Man Pages \" AUTHOR: Bas Couwenberg \" .TH APPLYGEO "1" "August 2016" "libgeotiff 1.4.1" "libgeotiff Manual Pages" .SH NAME applygeo \- apply georeferencing to an existing file .SH SYNOPSIS .B applygeo \fIfile.geo\fR \fIfile.tiff\fR .SH DESCRIPTION .PP .B applygeo is a utility for applying georeferencing to an existing file. .SH OPTIONS .TP 6 \fIfile.geo\fR file containing projection (eg. from listgeo) .TP 6 \fIfile.tiff\fR TIFF file into which the projection is written .SH AUTHORS jeskynar and Frank Warmerdam . .SH "SEE ALSO" .BR geotifcp (1) .BR listgeo (1) libgeotiff-1.7.4/man/man1/Makefile.am0000664000175000017500000000010614020740032014210 00000000000000man_MANS = applygeo.1 geotifcp.1 listgeo.1 EXTRA_DIST = $(man_MANS) libgeotiff-1.7.4/man/man1/Makefile.in0000664000175000017500000004051014755113347014246 00000000000000# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2018 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = man/man1 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/m4/ax_prog_doxygen.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/geo_config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } man1dir = $(mandir)/man1 am__installdirs = "$(DESTDIR)$(man1dir)" NROFF = nroff MANS = $(man_MANS) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_DX_CURRENT_FEATURE = @DX_FLAG_DX_CURRENT_FEATURE@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ JPEG_INC = @JPEG_INC@ JPEG_PREFIX = @JPEG_PREFIX@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBGEOTIFF_MAJOR_VERSION = @LIBGEOTIFF_MAJOR_VERSION@ LIBGEOTIFF_MINOR_VERSION = @LIBGEOTIFF_MINOR_VERSION@ LIBGEOTIFF_PATCH_VERSION = @LIBGEOTIFF_PATCH_VERSION@ LIBGEOTIFF_REV_VERSION = @LIBGEOTIFF_REV_VERSION@ LIBGEOTIFF_STRING_VERSION = @LIBGEOTIFF_STRING_VERSION@ LIBGEOTIFF_VERSION = @LIBGEOTIFF_VERSION@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTIFF_CFLAGS = @LIBTIFF_CFLAGS@ LIBTIFF_LIBS = @LIBTIFF_LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ NOUNDEFINED = @NOUNDEFINED@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ PROJ_CFLAGS = @PROJ_CFLAGS@ PROJ_INCLUDE = @PROJ_INCLUDE@ PROJ_LIBS = @PROJ_LIBS@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ TIFF_INC = @TIFF_INC@ TIFF_PREFIX = @TIFF_PREFIX@ VERSION = @VERSION@ ZIP_INC = @ZIP_INC@ ZIP_PREFIX = @ZIP_PREFIX@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ man_MANS = applygeo.1 geotifcp.1 listgeo.1 EXTRA_DIST = $(man_MANS) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/man1/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu man/man1/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-man1: $(man_MANS) @$(NORMAL_INSTALL) @list1=''; \ list2='$(man_MANS)'; \ test -n "$(man1dir)" \ && test -n "`echo $$list1$$list2`" \ || exit 0; \ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ { for i in $$list1; do echo "$$i"; done; \ if test -n "$$list2"; then \ for i in $$list2; do echo "$$i"; done \ | sed -n '/\.1[a-z]*$$/p'; \ fi; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ done; } uninstall-man1: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man1dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(MANS) installdirs: for dir in "$(DESTDIR)$(man1dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-man install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-man1 install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-man uninstall-man: uninstall-man1 .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ cscopelist-am ctags-am distclean distclean-generic \ distclean-libtool distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-man1 install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ps ps-am tags-am uninstall uninstall-am uninstall-man \ uninstall-man1 .PRECIOUS: Makefile # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: libgeotiff-1.7.4/man/man1/listgeo.10000664000175000017500000000262214020740032013711 00000000000000\" TITLE: libgeotiff Man Pages \" AUTHOR: Marco Cecchetti \" .TH LISTGEO "1" "October 2008" "libgeotiff 1.2.5" "libgeotiff Manual Pages" .SH NAME listgeo \- dump geotiff metadata .SH SYNOPSIS .B listgeo [\-tfw] [\-no_norm] [\-proj4] [\-t \fIDIR\fP] file .SH DESCRIPTION .PP The program listgeo takes a GeoTIFF file as input and dumps to the standard output a GeoTIFF "metadata" file, which is human readable, and may also be used as input to other programs which use the "GTIFImport" routine, such as geotifcp. .SH OPTIONS listgeo accepts the following options: .TP 6 .B \-d report lat/long corners in decimal degrees instead of DMS .TP 6 .B \-tfw Generate a .tfw (ESRI TIFF World) file for the target file .TP 6 .B \-no-norm Don't report 'normalized' parameter values .TP 6 .B \-proj4 Report PROJ.4 equivelent projection definition .TP 6 .B \-t \fIDIR\fP force to look in \fIDIR\fP for EPSG_CVS files, overriding default behaviour .SH OTHER INFO This program is distributed with libgeotiff software. The home page is located at https://trac.osgeo.org/geotiff/. Here you can find links about other related projects. A mailing list about libgeotiff development is currenctly active at geotiff@lists.maptools.org. .SH AUTHORS Niles Ritter, Frank Warmerdam , Derrick J. Brashear and many others contributors. .SH "SEE ALSO" .BR geotifcp (1) .BR applygeo (1) libgeotiff-1.7.4/man/Makefile.am0000664000175000017500000000001714020740032013355 00000000000000SUBDIRS = man1 libgeotiff-1.7.4/man/Makefile.in0000664000175000017500000004672314755113347013426 00000000000000# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2018 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = man ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/m4/ax_prog_doxygen.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/geo_config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ distdir distdir-am am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_DX_CURRENT_FEATURE = @DX_FLAG_DX_CURRENT_FEATURE@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ JPEG_INC = @JPEG_INC@ JPEG_PREFIX = @JPEG_PREFIX@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBGEOTIFF_MAJOR_VERSION = @LIBGEOTIFF_MAJOR_VERSION@ LIBGEOTIFF_MINOR_VERSION = @LIBGEOTIFF_MINOR_VERSION@ LIBGEOTIFF_PATCH_VERSION = @LIBGEOTIFF_PATCH_VERSION@ LIBGEOTIFF_REV_VERSION = @LIBGEOTIFF_REV_VERSION@ LIBGEOTIFF_STRING_VERSION = @LIBGEOTIFF_STRING_VERSION@ LIBGEOTIFF_VERSION = @LIBGEOTIFF_VERSION@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTIFF_CFLAGS = @LIBTIFF_CFLAGS@ LIBTIFF_LIBS = @LIBTIFF_LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ NOUNDEFINED = @NOUNDEFINED@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ PROJ_CFLAGS = @PROJ_CFLAGS@ PROJ_INCLUDE = @PROJ_INCLUDE@ PROJ_LIBS = @PROJ_LIBS@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ TIFF_INC = @TIFF_INC@ TIFF_PREFIX = @TIFF_PREFIX@ VERSION = @VERSION@ ZIP_INC = @ZIP_INC@ ZIP_PREFIX = @ZIP_PREFIX@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ SUBDIRS = man1 all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu man/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(am__recursive_targets) install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ check-am clean clean-generic clean-libtool cscopelist-am ctags \ ctags-am distclean distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ps ps-am tags tags-am uninstall uninstall-am .PRECIOUS: Makefile # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: libgeotiff-1.7.4/geo_ctrans.inc0000664000175000017500000000667614622755317013432 00000000000000/****************************************************************************** * $Id$ * * Project: libgeotiff * Purpose: GeoTIFF Projection Method codes. * Author: Frank Warmerdam, warmerdam@pobox.com * ****************************************************************************** * Copyright (c) 2005, Frank Warmerdam * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. ****************************************************************************** */ /* C database for Geotiff include files. */ /* the macro ValuePair() must be defined */ /* by the enclosing include file */ ValuePair(CT_TransverseMercator, 1) ValuePair(CT_TransvMercator_Modified_Alaska, 2) ValuePair(CT_ObliqueMercator, 3) ValuePair(CT_ObliqueMercator_Laborde, 4) ValuePair(CT_ObliqueMercator_Rosenmund, 5) ValuePair(CT_ObliqueMercator_Spherical, 6) /* not advisable */ ValuePair(CT_Mercator, 7) ValuePair(CT_LambertConfConic_2SP, 8) ValuePair(CT_LambertConfConic,CT_LambertConfConic_2SP) /* Alias */ ValuePair(CT_LambertConfConic_1SP, 9) ValuePair(CT_LambertConfConic_Helmert,CT_LambertConfConic_1SP) /* alias */ ValuePair(CT_LambertAzimEqualArea, 10) ValuePair(CT_AlbersEqualArea, 11) ValuePair(CT_AzimuthalEquidistant, 12) ValuePair(CT_EquidistantConic, 13) ValuePair(CT_Stereographic, 14) ValuePair(CT_PolarStereographic, 15) ValuePair(CT_ObliqueStereographic, 16) /* not advisable */ ValuePair(CT_Equirectangular, 17) ValuePair(CT_CassiniSoldner, 18) ValuePair(CT_Gnomonic, 19) ValuePair(CT_MillerCylindrical, 20) ValuePair(CT_Orthographic, 21) ValuePair(CT_Polyconic, 22) ValuePair(CT_Robinson, 23) ValuePair(CT_Sinusoidal, 24) ValuePair(CT_VanDerGrinten, 25) ValuePair(CT_NewZealandMapGrid, 26) /* Added for 1.0 */ ValuePair(CT_TransvMercator_SouthOrientated, 27) /* Added Feb 2005 */ ValuePair(CT_CylindricalEqualArea, 28) /* Added May 2012 - from now on we use the EPSG */ ValuePair(CT_HotineObliqueMercatorAzimuthCenter, 9815) /* Aliases */ ValuePair(CT_SouthOrientedGaussConformal,CT_TransvMercator_SouthOrientated) ValuePair(CT_AlaskaConformal, CT_TransvMercator_Modified_Alaska) ValuePair(CT_TransvEquidistCylindrical, CT_CassiniSoldner) ValuePair(CT_ObliqueMercator_Hotine, CT_ObliqueMercator) ValuePair(CT_SwissObliqueCylindrical, CT_ObliqueMercator_Rosenmund) ValuePair(CT_GaussBoaga, CT_TransverseMercator) ValuePair(CT_GaussKruger, CT_TransverseMercator) ValuePair(CT_TransvMercator_SouthOriented, CT_TransvMercator_SouthOrientated) libgeotiff-1.7.4/geo_simpletags.h0000664000175000017500000000450414020740032013726 00000000000000/****************************************************************************** * Copyright (c) 2008, Frank Warmerdam * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. ***************************************************************************** * * geo_simpletags.h * * Provides interface for a "simple tags io in memory" mechanism * as an alternative to accessing a real tiff file using libtiff. * ****************************************************************************/ #ifndef LIBGEOTIFF_GEO_SIMPLETAGS_H_ #define LIBGEOTIFF_GEO_SIMPLETAGS_H_ #include "geotiff.h" #if defined(__cplusplus) extern "C" { #endif #define STT_SHORT 1 #define STT_DOUBLE 2 #define STT_ASCII 3 typedef struct { int tag; int count; int type; void *data; } ST_KEY; typedef struct { int key_count; ST_KEY *key_list; } ST_TIFF; typedef void *STIFF; void GTIF_DLL GTIFSetSimpleTagsMethods(TIFFMethod *method); int GTIF_DLL ST_SetKey( ST_TIFF *, int tag, int count, int st_type, void *data ); int GTIF_DLL ST_GetKey( ST_TIFF *, int tag, int *count, int *st_type, void **data_ptr ); ST_TIFF GTIF_DLL *ST_Create( void ); void GTIF_DLL ST_Destroy( ST_TIFF * ); int GTIF_DLL ST_TagType( int tag ); #if defined(__cplusplus) } #endif #endif /* LIBGEOTIFF_GEO_SIMPLETAGS_H_ */ libgeotiff-1.7.4/cpl_serv.c0000664000175000017500000004257114622755317012566 00000000000000/****************************************************************************** * Copyright (c) 1998, Frank Warmerdam * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. ****************************************************************************** * * cpl_serv.c: Various Common Portability Library derived convenience functions * */ #include "cpl_serv.h" #include "geo_tiffp.h" /************************************************************************/ /* CPLCalloc() */ /************************************************************************/ void *CPLCalloc( int nCount, int nSize ) { if( nSize == 0 ) return NULL; void *pReturn = VSICalloc( nCount, nSize ); if( pReturn == NULL ) { CPLError( CE_Fatal, CPLE_OutOfMemory, "CPLCalloc(): Out of memory allocating %d bytes.\n", nSize * nCount ); } return pReturn; } /************************************************************************/ /* CPLMalloc() */ /************************************************************************/ void *CPLMalloc( int nSize ) { if( nSize == 0 ) return NULL; void *pReturn = VSIMalloc( nSize ); if( pReturn == NULL ) { CPLError( CE_Fatal, CPLE_OutOfMemory, "CPLMalloc(): Out of memory allocating %d bytes.\n", nSize ); } return pReturn; } /************************************************************************/ /* CPLRealloc() */ /************************************************************************/ void * CPLRealloc( void * pData, int nNewSize ) { void *pReturn; if( pData == NULL ) pReturn = VSIMalloc( nNewSize ); else pReturn = VSIRealloc( pData, nNewSize ); if( pReturn == NULL ) { CPLError( CE_Fatal, CPLE_OutOfMemory, "CPLRealloc(): Out of memory allocating %d bytes.\n", nNewSize ); } return pReturn; } /************************************************************************/ /* CPLStrdup() */ /************************************************************************/ char *CPLStrdup( const char * pszString ) { if( pszString == NULL ) pszString = ""; char *pszReturn = VSIMalloc( strlen(pszString)+1 ); if( pszReturn == NULL ) { CPLError( CE_Fatal, CPLE_OutOfMemory, "CPLStrdup(): Out of memory allocating %d bytes.\n", strlen(pszString) ); return pszReturn; } strcpy( pszReturn, pszString ); return pszReturn; } /************************************************************************/ /* CPLReadLine() */ /* */ /* Read a line of text from the given file handle, taking care */ /* to capture CR and/or LF and strip off ... equivelent of */ /* DKReadLine(). Pointer to an internal buffer is returned. */ /* The application shouldn't free it, or depend on it's value */ /* past the next call to CPLReadLine() */ /************************************************************************/ const char *CPLReadLine( FILE * fp ) { /* -------------------------------------------------------------------- */ /* Cleanup case. */ /* -------------------------------------------------------------------- */ static char *pszRLBuffer = NULL; static int nRLBufferSize = 0; if( fp == NULL ) { CPLFree( pszRLBuffer ); pszRLBuffer = NULL; nRLBufferSize = 0; return NULL; } /* -------------------------------------------------------------------- */ /* Loop reading chunks of the line till we get to the end of */ /* the line. */ /* -------------------------------------------------------------------- */ int nReadSoFar = 0; do { /* -------------------------------------------------------------------- */ /* Grow the working buffer if we have it nearly full. Fail out */ /* of read line if we can't reallocate it big enough (for */ /* instance for a _very large_ file with no newlines). */ /* -------------------------------------------------------------------- */ if( nRLBufferSize-nReadSoFar < 128 ) { nRLBufferSize = nRLBufferSize*2 + 128; if( pszRLBuffer == NULL ) pszRLBuffer = (char *) VSIMalloc(nRLBufferSize); else pszRLBuffer = (char *) VSIRealloc(pszRLBuffer, nRLBufferSize); if( pszRLBuffer == NULL ) { nRLBufferSize = 0; return NULL; } } /* -------------------------------------------------------------------- */ /* Do the actual read. */ /* -------------------------------------------------------------------- */ if( VSIFGets( pszRLBuffer+nReadSoFar, nRLBufferSize-nReadSoFar, fp ) == NULL ) { CPLFree( pszRLBuffer ); pszRLBuffer = NULL; nRLBufferSize = 0; return NULL; } nReadSoFar = strlen(pszRLBuffer); } while( nReadSoFar == nRLBufferSize - 1 && pszRLBuffer[nRLBufferSize-2] != 13 && pszRLBuffer[nRLBufferSize-2] != 10 ); /* -------------------------------------------------------------------- */ /* Clear CR and LF off the end. */ /* -------------------------------------------------------------------- */ int nLength = strlen(pszRLBuffer); if( nLength > 0 && (pszRLBuffer[nLength-1] == 10 || pszRLBuffer[nLength-1] == 13) ) { pszRLBuffer[--nLength] = '\0'; } if( nLength > 0 && (pszRLBuffer[nLength-1] == 10 || pszRLBuffer[nLength-1] == 13) ) { pszRLBuffer[--nLength] = '\0'; } return( pszRLBuffer ); } /*===================================================================== StringList manipulation functions. =====================================================================*/ /********************************************************************** * CSLAddString() * * Append a string to a StringList and return a pointer to the modified * StringList. * If the input StringList is NULL, then a new StringList is created. **********************************************************************/ char **CSLAddString(char **papszStrList, const char *pszNewString) { if (pszNewString == NULL) return papszStrList; /* Nothing to do!*/ int nItems = 0; /* Allocate room for the new string */ if (papszStrList == NULL) papszStrList = (char**) CPLCalloc(2,sizeof(char*)); else { nItems = CSLCount(papszStrList); papszStrList = (char**)CPLRealloc(papszStrList, (nItems+2)*sizeof(char*)); } /* Copy the string in the list */ papszStrList[nItems] = CPLStrdup(pszNewString); papszStrList[nItems+1] = NULL; return papszStrList; } /********************************************************************** * CSLCount() * * Return the number of lines in a Stringlist. **********************************************************************/ int CSLCount(char **papszStrList) { int nItems=0; if (papszStrList) { while(*papszStrList != NULL) { nItems++; papszStrList++; } } return nItems; } /************************************************************************/ /* CSLGetField() */ /* */ /* Fetches the indicated field, being careful not to crash if */ /* the field doesn't exist within this string list. The */ /* returned pointer should not be freed, and doesn't */ /* necessarily last long. */ /************************************************************************/ const char * CSLGetField( char ** papszStrList, int iField ) { if( papszStrList == NULL || iField < 0 ) return( "" ); for( int i = 0; i < iField+1; i++ ) { if( papszStrList[i] == NULL ) return ""; } return( papszStrList[iField] ); } /********************************************************************** * CSLDestroy() * * Free all memory used by a StringList. **********************************************************************/ void CSLDestroy(char **papszStrList) { if (!papszStrList) return; char **papszPtr = papszStrList; while(*papszPtr != NULL) { CPLFree(*papszPtr); papszPtr++; } CPLFree(papszStrList); } /********************************************************************** * CSLDuplicate() * * Allocate and return a copy of a StringList. **********************************************************************/ char **CSLDuplicate(char **papszStrList) { const int nLines = CSLCount(papszStrList); if (nLines == 0) return NULL; char **papszNewList = (char **)CPLMalloc((nLines+1)*sizeof(char*)); char **papszSrc = papszStrList; char **papszDst = papszNewList; while(*papszSrc != NULL) { *papszDst = CPLStrdup(*papszSrc); papszSrc++; papszDst++; } *papszDst = NULL; return papszNewList; } /********************************************************************** * CSLTokenizeString() * * Tokenizes a string and returns a StringList with one string for * each token. **********************************************************************/ char **CSLTokenizeString( const char *pszString ) { return CSLTokenizeStringComplex( pszString, " ", TRUE, FALSE ); } /************************************************************************/ /* CSLTokenizeStringComplex() */ /* */ /* The ultimate tokenizer? */ /************************************************************************/ char ** CSLTokenizeStringComplex( const char * pszString, const char * pszDelimiters, int bHonourStrings, int bAllowEmptyTokens ) { char **papszRetList = NULL; char *pszToken = (char *) CPLCalloc(10,1); int nTokenMax = 10; while( pszString != NULL && *pszString != '\0' ) { int bInString = FALSE; int nTokenLen = 0; /* Try to find the next delimeter, marking end of token */ for( ; *pszString != '\0'; pszString++ ) { /* End if this is a delimeter skip it and break. */ if( !bInString && strchr(pszDelimiters, *pszString) != NULL ) { pszString++; break; } /* If this is a quote, and we are honouring constant strings, then process the constant strings, with out delim but don't copy over the quotes */ if( bHonourStrings && *pszString == '"' ) { if( bInString ) { bInString = FALSE; continue; } else { bInString = TRUE; continue; } } /* Within string constants we allow for escaped quotes, but in processing them we will unescape the quotes */ if( bInString && pszString[0] == '\\' && pszString[1] == '"' ) { pszString++; } /* Within string constants a \\ sequence reduces to \ */ else if( bInString && pszString[0] == '\\' && pszString[1] == '\\' ) { pszString++; } if( nTokenLen >= nTokenMax-1 ) { nTokenMax = nTokenMax * 2 + 10; pszToken = (char *) CPLRealloc( pszToken, nTokenMax ); } pszToken[nTokenLen] = *pszString; nTokenLen++; } pszToken[nTokenLen] = '\0'; if( pszToken[0] != '\0' || bAllowEmptyTokens ) { papszRetList = CSLAddString( papszRetList, pszToken ); } } if( papszRetList == NULL ) papszRetList = (char **) CPLCalloc(sizeof(char *),1); CPLFree( pszToken ); return papszRetList; } /* static buffer to store the last error message. We'll assume that error * messages cannot be longer than 2000 chars... which is quite reasonable * (that's 25 lines of 80 chars!!!) */ static char gszCPLLastErrMsg[2000] = ""; static int gnCPLLastErrNo = 0; static void (*gpfnCPLErrorHandler)(CPLErr, int, const char *) = NULL; /********************************************************************** * CPLError() * * This function records an error code and displays the error message * to stderr. * * The error code can be accessed later using CPLGetLastErrNo() **********************************************************************/ void CPLError(CPLErr eErrClass, int err_no, const char *fmt, ...) { va_list args; /* Expand the error message */ va_start(args, fmt); vsprintf(gszCPLLastErrMsg, fmt, args); va_end(args); /* If the user provided his own error handling function, then call * it, otherwise print the error to stderr and return. */ gnCPLLastErrNo = err_no; if (gpfnCPLErrorHandler != NULL) { gpfnCPLErrorHandler(eErrClass, err_no, gszCPLLastErrMsg); } else { if( eErrClass == CE_Warning ) fprintf(stderr, "Warning %d: %s\n", gnCPLLastErrNo, gszCPLLastErrMsg); else fprintf(stderr, "ERROR %d: %s\n", gnCPLLastErrNo, gszCPLLastErrMsg); } if( eErrClass == CE_Fatal ) abort(); } /********************************************************************** * CPLErrorReset() * * Erase any traces of previous errors. **********************************************************************/ void CPLErrorReset() { gnCPLLastErrNo = 0; gszCPLLastErrMsg[0] = '\0'; } /********************************************************************** * CPLGetLastErrorNo() * **********************************************************************/ int CPLGetLastErrorNo() { return gnCPLLastErrNo; } /********************************************************************** * CPLGetLastErrorMsg() * **********************************************************************/ const char* CPLGetLastErrorMsg() { return gszCPLLastErrMsg; } /********************************************************************** * CPLSetErrorHandler() * * Allow the library's user to specify his own error handler function. * * A valid error handler is a C function with the following prototype: * * void MyErrorHandler(int errno, const char *msg) * * Pass NULL to come back to the default behavior. **********************************************************************/ void CPLSetErrorHandler(void (*pfnErrorHandler)(CPLErr, int, const char *)) { gpfnCPLErrorHandler = pfnErrorHandler; } /************************************************************************/ /* _CPLAssert() */ /* */ /* This function is called only when an assertion fails. */ /************************************************************************/ void _CPLAssert( const char * pszExpression, const char * pszFile, int iLine ) { CPLError( CE_Fatal, CPLE_AssertionFailed, "Assertion `%s' failed\n" "in file `%s', line %d\n", pszExpression, pszFile, iLine ); } libgeotiff-1.7.4/README.WIN0000664000175000017500000000113414020740032012063 00000000000000 Windows Build ------------- Most of the notes in the README apply on Windows as well; however, to configure and build follow the following steps: o Make sure you have the required environment variables set for VC++. Often this is accomplished by running the VCVARS32.BAT file from the VC++ bin directory. o Edit makefile.vc, updating the TIFF_DIR (or TIFF_LIB and TIFF_INC) variable to point to the location of the tiff build tree. o Build using the command ``nmake -f makefile.vc'' If you don't use makefile.vc, you will need to copy geo_config.h.vc to geo_config.h by hand. libgeotiff-1.7.4/install-sh0000755000175000017500000003601014623116630012564 00000000000000#!/bin/sh # install - install a program, script, or datafile scriptversion=2018-03-11.20; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # 'make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. tab=' ' nl=' ' IFS=" $tab$nl" # Set DOITPROG to "echo" to test this script. doit=${DOITPROG-} doit_exec=${doit:-exec} # Put in absolute file names if you don't have them in your path; # or use environment vars. chgrpprog=${CHGRPPROG-chgrp} chmodprog=${CHMODPROG-chmod} chownprog=${CHOWNPROG-chown} cmpprog=${CMPPROG-cmp} cpprog=${CPPROG-cp} mkdirprog=${MKDIRPROG-mkdir} mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} posix_mkdir= # Desired mode of installed file. mode=0755 chgrpcmd= chmodcmd=$chmodprog chowncmd= mvcmd=$mvprog rmcmd="$rmprog -f" stripcmd= src= dst= dir_arg= dst_arg= copy_on_change=false is_target_a_directory=possibly usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... In the 1st form, copy SRCFILE to DSTFILE. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: --help display this help and exit. --version display version info and exit. -c (ignored) -C install only if different (preserve the last data modification time) -d create directories instead of installing files. -g GROUP $chgrpprog installed files to GROUP. -m MODE $chmodprog installed files to MODE. -o USER $chownprog installed files to USER. -s $stripprog installed files. -t DIRECTORY install into DIRECTORY. -T report an error if DSTFILE is a directory. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " while test $# -ne 0; do case $1 in -c) ;; -C) copy_on_change=true;; -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 case $mode in *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*) echo "$0: invalid mode: $mode" >&2 exit 1;; esac shift;; -o) chowncmd="$chownprog $2" shift;; -s) stripcmd=$stripprog;; -t) is_target_a_directory=always dst_arg=$2 # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac shift;; -T) is_target_a_directory=never;; --version) echo "$0 $scriptversion"; exit $?;; --) shift break;; -*) echo "$0: invalid option: $1" >&2 exit 1;; *) break;; esac shift done # We allow the use of options -d and -T together, by making -d # take the precedence; this is for compatibility with GNU install. if test -n "$dir_arg"; then if test -n "$dst_arg"; then echo "$0: target directory not allowed when installing a directory." >&2 exit 1 fi fi if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dst_arg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dst_arg" shift # fnord fi shift # arg dst_arg=$arg # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac done fi if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call 'install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then if test $# -gt 1 || test "$is_target_a_directory" = always; then if test ! -d "$dst_arg"; then echo "$0: $dst_arg: Is not a directory." >&2 exit 1 fi fi fi if test -z "$dir_arg"; then do_exit='(exit $ret); exit $ret' trap "ret=129; $do_exit" 1 trap "ret=130; $do_exit" 2 trap "ret=141; $do_exit" 13 trap "ret=143; $do_exit" 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. case $mode in # Optimize common cases. *644) cp_umask=133;; *755) cp_umask=22;; *[0-7]) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac fi for src do # Protect names problematic for 'test' and other utilities. case $src in -* | [=\(\)!]) src=./$src;; esac if test -n "$dir_arg"; then dst=$src dstdir=$dst test -d "$dstdir" dstdir_status=$? else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dst_arg # If destination is a directory, append the input filename. if test -d "$dst"; then if test "$is_target_a_directory" = never; then echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi dstdir=$dst dstbase=`basename "$src"` case $dst in */) dst=$dst$dstbase;; *) dst=$dst/$dstbase;; esac dstdir_status=0 else dstdir=`dirname "$dst"` test -d "$dstdir" dstdir_status=$? fi fi case $dstdir in */) dstdirslash=$dstdir;; *) dstdirslash=$dstdir/;; esac obsolete_mkdir_used=false if test $dstdir_status != 0; then case $posix_mkdir in '') # Create intermediate dirs using mode 755 as modified by the umask. # This is like FreeBSD 'install' as of 1997-10-28. umask=`umask` case $stripcmd.$umask in # Optimize common cases. *[2367][2367]) mkdir_umask=$umask;; .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; *[0-7]) mkdir_umask=`expr $umask + 22 \ - $umask % 100 % 40 + $umask % 20 \ - $umask % 10 % 4 + $umask % 2 `;; *) mkdir_umask=$umask,go-w;; esac # With -d, create the new directory with the user-specified mode. # Otherwise, rely on $mkdir_umask. if test -n "$dir_arg"; then mkdir_mode=-m$mode else mkdir_mode= fi posix_mkdir=false case $umask in *[123567][0-7][0-7]) # POSIX mkdir -p sets u+wx bits regardless of umask, which # is incompatible with FreeBSD 'install' when (umask & 300) != 0. ;; *) # Note that $RANDOM variable is not portable (e.g. dash); Use it # here however when possible just to lower collision chance. tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0 # Because "mkdir -p" follows existing symlinks and we likely work # directly in world-writeable /tmp, make sure that the '$tmpdir' # directory is successfully created first before we actually test # 'mkdir -p' feature. if (umask $mkdir_umask && $mkdirprog $mkdir_mode "$tmpdir" && exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1 then if test -z "$dir_arg" || { # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. test_tmpdir="$tmpdir/a" ls_ld_tmpdir=`ls -ld "$test_tmpdir"` case $ls_ld_tmpdir in d????-?r-*) different_mode=700;; d????-?--*) different_mode=755;; *) false;; esac && $mkdirprog -m$different_mode -p -- "$test_tmpdir" && { ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"` test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" } } then posix_mkdir=: fi rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" else # Remove any dirs left behind by ancient mkdir implementations. rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null fi trap '' 0;; esac;; esac if $posix_mkdir && ( umask $mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else # The umask is ridiculous, or mkdir does not conform to POSIX, # or it failed possibly due to a race condition. Create the # directory the slow way, step by step, checking for races as we go. case $dstdir in /*) prefix='/';; [-=\(\)!]*) prefix='./';; *) prefix='';; esac oIFS=$IFS IFS=/ set -f set fnord $dstdir shift set +f IFS=$oIFS prefixes= for d do test X"$d" = X && continue prefix=$prefix$d if test -d "$prefix"; then prefixes= else if $posix_mkdir; then (umask=$mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break # Don't fail if two instances are running concurrently. test -d "$prefix" || exit 1 else case $prefix in *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; *) qprefix=$prefix;; esac prefixes="$prefixes '$qprefix'" fi fi prefix=$prefix/ done if test -n "$prefixes"; then # Don't fail if two instances are running concurrently. (umask $mkdir_umask && eval "\$doit_exec \$mkdirprog $prefixes") || test -d "$dstdir" || exit 1 obsolete_mkdir_used=true fi fi fi if test -n "$dir_arg"; then { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else # Make a couple of temp file names in the proper directory. dsttmp=${dstdirslash}_inst.$$_ rmtmp=${dstdirslash}_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then rm -f "$dsttmp" else # Rename the file to the real destination. $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. { # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { test ! -f "$dst" || $doit $rmcmd -f "$dst" 2>/dev/null || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } } || { echo "$0: cannot unlink or rename $dst" >&2 (exit 1); exit 1 } } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 trap '' 0 fi done # Local variables: # eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: libgeotiff-1.7.4/config.guess0000755000175000017500000012637314020740157013112 00000000000000#! /bin/sh # Attempt to guess a canonical system name. # Copyright 1992-2018 Free Software Foundation, Inc. timestamp='2018-02-24' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, see . # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that # program. This Exception is an additional permission under section 7 # of the GNU General Public License, version 3 ("GPLv3"). # # Originally written by Per Bothner; maintained since 2000 by Ben Elliston. # # You can get the latest version of this script from: # https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess # # Please send patches to . me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system \`$me' is run on. Options: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright 1992-2018 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi trap 'exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; dummy=$tmp/dummy ; tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; case $CC_FOR_BUILD,$HOST_CC,$CC in ,,) echo "int x;" > "$dummy.c" ; for c in cc gcc c89 c99 ; do if ($c -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac ; set_cc_for_build= ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown case "$UNAME_SYSTEM" in Linux|GNU|GNU/*) # If the system lacks a compiler, then just pick glibc. # We could probably try harder. LIBC=gnu eval "$set_cc_for_build" cat <<-EOF > "$dummy.c" #include #if defined(__UCLIBC__) LIBC=uclibc #elif defined(__dietlibc__) LIBC=dietlibc #else LIBC=gnu #endif EOF eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`" # If ldd exists, use it to detect musl libc. if command -v ldd >/dev/null && \ ldd --version 2>&1 | grep -q ^musl then LIBC=musl fi ;; esac # Note: order is significant - the case branches are not exclusive. case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ "/sbin/$sysctl" 2>/dev/null || \ "/usr/sbin/$sysctl" 2>/dev/null || \ echo unknown)` case "$UNAME_MACHINE_ARCH" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; sh5el) machine=sh5le-unknown ;; earmv*) arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'` endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'` machine="${arch}${endian}"-unknown ;; *) machine="$UNAME_MACHINE_ARCH"-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently (or will in the future) and ABI. case "$UNAME_MACHINE_ARCH" in earm*) os=netbsdelf ;; arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval "$set_cc_for_build" if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ELF__ then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # Determine ABI tags. case "$UNAME_MACHINE_ARCH" in earm*) expr='s/^earmv[0-9]/-eabi/;s/eb$//' abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"` ;; esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need # kernel version information, so it can be replaced with a # suitable tag, in the style of linux-gnu. case "$UNAME_VERSION" in Debian*) release='-gnu' ;; *) release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "$machine-${os}${release}${abi}" exit ;; *:Bitrig:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE" exit ;; *:OpenBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` echo "$UNAME_MACHINE_ARCH"-unknown-openbsd"$UNAME_RELEASE" exit ;; *:LibertyBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` echo "$UNAME_MACHINE_ARCH"-unknown-libertybsd"$UNAME_RELEASE" exit ;; *:MidnightBSD:*:*) echo "$UNAME_MACHINE"-unknown-midnightbsd"$UNAME_RELEASE" exit ;; *:ekkoBSD:*:*) echo "$UNAME_MACHINE"-unknown-ekkobsd"$UNAME_RELEASE" exit ;; *:SolidBSD:*:*) echo "$UNAME_MACHINE"-unknown-solidbsd"$UNAME_RELEASE" exit ;; macppc:MirBSD:*:*) echo powerpc-unknown-mirbsd"$UNAME_RELEASE" exit ;; *:MirBSD:*:*) echo "$UNAME_MACHINE"-unknown-mirbsd"$UNAME_RELEASE" exit ;; *:Sortix:*:*) echo "$UNAME_MACHINE"-unknown-sortix exit ;; *:Redox:*:*) echo "$UNAME_MACHINE"-unknown-redox exit ;; mips:OSF1:*.*) echo mips-dec-osf1 exit ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ;; *5.*) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ;; esac # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU # types through head -n 1, so we only detect the type of CPU 0. ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case "$ALPHA_CPU_TYPE" in "EV4 (21064)") UNAME_MACHINE=alpha ;; "EV4.5 (21064)") UNAME_MACHINE=alpha ;; "LCA4 (21066/21068)") UNAME_MACHINE=alpha ;; "EV5 (21164)") UNAME_MACHINE=alphaev5 ;; "EV5.6 (21164A)") UNAME_MACHINE=alphaev56 ;; "EV5.6 (21164PC)") UNAME_MACHINE=alphapca56 ;; "EV5.7 (21164PC)") UNAME_MACHINE=alphapca57 ;; "EV6 (21264)") UNAME_MACHINE=alphaev6 ;; "EV6.7 (21264A)") UNAME_MACHINE=alphaev67 ;; "EV6.8CB (21264C)") UNAME_MACHINE=alphaev68 ;; "EV6.8AL (21264B)") UNAME_MACHINE=alphaev68 ;; "EV6.8CX (21264D)") UNAME_MACHINE=alphaev68 ;; "EV6.9A (21264/EV69A)") UNAME_MACHINE=alphaev69 ;; "EV7 (21364)") UNAME_MACHINE=alphaev7 ;; "EV7.9 (21364A)") UNAME_MACHINE=alphaev79 ;; esac # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`" # Reset EXIT trap before exiting to avoid spurious non-zero exit code. exitcode=$? trap '' 0 exit $exitcode ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit ;; *:[Aa]miga[Oo][Ss]:*:*) echo "$UNAME_MACHINE"-unknown-amigaos exit ;; *:[Mm]orph[Oo][Ss]:*:*) echo "$UNAME_MACHINE"-unknown-morphos exit ;; *:OS/390:*:*) echo i370-ibm-openedition exit ;; *:z/VM:*:*) echo s390-ibm-zvmoe exit ;; *:OS400:*:*) echo powerpc-ibm-os400 exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix"$UNAME_RELEASE" exit ;; arm*:riscos:*:*|arm*:RISCOS:*:*) echo arm-unknown-riscos exit ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit ;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 exit ;; DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) case `/usr/bin/uname -p` in sparc) echo sparc-icl-nx7; exit ;; esac ;; s390x:SunOS:*:*) echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" exit ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" exit ;; i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) echo i386-pc-auroraux"$UNAME_RELEASE" exit ;; i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) eval "$set_cc_for_build" SUN_ARCH=i386 # If there is a compiler, see if it is configured for 64-bit objects. # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. # This test works for both compilers. if [ "$CC_FOR_BUILD" != no_compiler_found ]; then if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then SUN_ARCH=x86_64 fi fi echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" exit ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`" exit ;; sun3*:SunOS:*:*) echo m68k-sun-sunos"$UNAME_RELEASE" exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos"$UNAME_RELEASE" ;; sun4) echo sparc-sun-sunos"$UNAME_RELEASE" ;; esac exit ;; aushp:SunOS:*:*) echo sparc-auspex-sunos"$UNAME_RELEASE" exit ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint"$UNAME_RELEASE" exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint"$UNAME_RELEASE" exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint"$UNAME_RELEASE" exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint"$UNAME_RELEASE" exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint"$UNAME_RELEASE" exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint"$UNAME_RELEASE" exit ;; m68k:machten:*:*) echo m68k-apple-machten"$UNAME_RELEASE" exit ;; powerpc:machten:*:*) echo powerpc-apple-machten"$UNAME_RELEASE" exit ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix"$UNAME_RELEASE" exit ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix"$UNAME_RELEASE" exit ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix"$UNAME_RELEASE" exit ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval "$set_cc_for_build" sed 's/^ //' << EOF > "$dummy.c" #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD -o "$dummy" "$dummy.c" && dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` && SYSTEM_NAME=`"$dummy" "$dummyarg"` && { echo "$SYSTEM_NAME"; exit; } echo mips-mips-riscos"$UNAME_RELEASE" exit ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax exit ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax exit ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if [ "$UNAME_PROCESSOR" = mc88100 ] || [ "$UNAME_PROCESSOR" = mc88110 ] then if [ "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx ] || \ [ "$TARGET_BINARY_INTERFACE"x = x ] then echo m88k-dg-dgux"$UNAME_RELEASE" else echo m88k-dg-dguxbcs"$UNAME_RELEASE" fi else echo i586-dg-dgux"$UNAME_RELEASE" fi exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit ;; *:IRIX*:*:*) echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`" exit ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix exit ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" fi echo "$UNAME_MACHINE"-ibm-aix"$IBM_REV" exit ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval "$set_cc_for_build" sed 's/^ //' << EOF > "$dummy.c" #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` then echo "$SYSTEM_NAME" else echo rs6000-ibm-aix3.2.5 fi elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit ;; *:AIX:*:[4567]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/lslpp ] ; then IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` else IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" fi echo "$IBM_ARCH"-ibm-aix"$IBM_REV" exit ;; *:AIX:*:*) echo rs6000-ibm-aix exit ;; ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*) echo romp-ibm-bsd4.4 exit ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd"$UNAME_RELEASE" # 4.3 with uname added to exit ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` case "$UNAME_MACHINE" in 9000/31?) HP_ARCH=m68000 ;; 9000/[34]??) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "$sc_cpu_version" in 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "$sc_kernel_bits" in 32) HP_ARCH=hppa2.0n ;; 64) HP_ARCH=hppa2.0w ;; '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 esac ;; esac fi if [ "$HP_ARCH" = "" ]; then eval "$set_cc_for_build" sed 's/^ //' << EOF > "$dummy.c" #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac if [ "$HP_ARCH" = hppa2.0w ] then eval "$set_cc_for_build" # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler # generating 64-bit code. GNU and HP use different nomenclature: # # $ CC_FOR_BUILD=cc ./config.guess # => hppa2.0w-hp-hpux11.23 # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess # => hppa64-hp-hpux11.23 if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | grep -q __LP64__ then HP_ARCH=hppa2.0w else HP_ARCH=hppa64 fi fi echo "$HP_ARCH"-hp-hpux"$HPUX_REV" exit ;; ia64:HP-UX:*:*) HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux"$HPUX_REV" exit ;; 3050*:HI-UX:*:*) eval "$set_cc_for_build" sed 's/^ //' << EOF > "$dummy.c" #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` && { echo "$SYSTEM_NAME"; exit; } echo unknown-hitachi-hiuxwe2 exit ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*) echo hppa1.1-hp-bsd exit ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*) echo hppa1.1-hp-osf exit ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo "$UNAME_MACHINE"-unknown-osf1mk else echo "$UNAME_MACHINE"-unknown-osf1 fi exit ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*[A-Z]90:*:*:*) echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit ;; CRAY*TS:*:*:*) echo t90-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' exit ;; *:UNICOS/mp:*:*) echo craynv-cray-unicosmp"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; 5000:UNIX_System_V:4.*:*) FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo "$UNAME_MACHINE"-pc-bsdi"$UNAME_RELEASE" exit ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi"$UNAME_RELEASE" exit ;; *:BSD/OS:*:*) echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE" exit ;; *:FreeBSD:*:*) UNAME_PROCESSOR=`/usr/bin/uname -p` case "$UNAME_PROCESSOR" in amd64) UNAME_PROCESSOR=x86_64 ;; i386) UNAME_PROCESSOR=i586 ;; esac echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" exit ;; i*:CYGWIN*:*) echo "$UNAME_MACHINE"-pc-cygwin exit ;; *:MINGW64*:*) echo "$UNAME_MACHINE"-pc-mingw64 exit ;; *:MINGW*:*) echo "$UNAME_MACHINE"-pc-mingw32 exit ;; *:MSYS*:*) echo "$UNAME_MACHINE"-pc-msys exit ;; i*:PW*:*) echo "$UNAME_MACHINE"-pc-pw32 exit ;; *:Interix*:*) case "$UNAME_MACHINE" in x86) echo i586-pc-interix"$UNAME_RELEASE" exit ;; authenticamd | genuineintel | EM64T) echo x86_64-unknown-interix"$UNAME_RELEASE" exit ;; IA64) echo ia64-unknown-interix"$UNAME_RELEASE" exit ;; esac ;; i*:UWIN*:*) echo "$UNAME_MACHINE"-pc-uwin exit ;; amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) echo x86_64-unknown-cygwin exit ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" exit ;; *:GNU:*:*) # the GNU system echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`" exit ;; *:GNU/*:*:*) # other systems with GNU libc and userland echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC" exit ;; i*86:Minix:*:*) echo "$UNAME_MACHINE"-pc-minix exit ;; aarch64:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; aarch64_be:Linux:*:*) UNAME_MACHINE=aarch64_be echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep -q ld.so.1 if test "$?" = 0 ; then LIBC=gnulibc1 ; fi echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; arc:Linux:*:* | arceb:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; arm*:Linux:*:*) eval "$set_cc_for_build" if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_EABI__ then echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" else if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_PCS_VFP then echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabi else echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabihf fi fi exit ;; avr32*:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; cris:Linux:*:*) echo "$UNAME_MACHINE"-axis-linux-"$LIBC" exit ;; crisv32:Linux:*:*) echo "$UNAME_MACHINE"-axis-linux-"$LIBC" exit ;; e2k:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; frv:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; hexagon:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; i*86:Linux:*:*) echo "$UNAME_MACHINE"-pc-linux-"$LIBC" exit ;; ia64:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; k1om:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; m32r*:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; m68*:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; mips:Linux:*:* | mips64:Linux:*:*) eval "$set_cc_for_build" sed 's/^ //' << EOF > "$dummy.c" #undef CPU #undef ${UNAME_MACHINE} #undef ${UNAME_MACHINE}el #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=${UNAME_MACHINE}el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=${UNAME_MACHINE} #else CPU= #endif #endif EOF eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU'`" test "x$CPU" != x && { echo "$CPU-unknown-linux-$LIBC"; exit; } ;; mips64el:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; openrisc*:Linux:*:*) echo or1k-unknown-linux-"$LIBC" exit ;; or32:Linux:*:* | or1k*:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; padre:Linux:*:*) echo sparc-unknown-linux-"$LIBC" exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-"$LIBC" exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) echo hppa1.1-unknown-linux-"$LIBC" ;; PA8*) echo hppa2.0-unknown-linux-"$LIBC" ;; *) echo hppa-unknown-linux-"$LIBC" ;; esac exit ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-"$LIBC" exit ;; ppc:Linux:*:*) echo powerpc-unknown-linux-"$LIBC" exit ;; ppc64le:Linux:*:*) echo powerpc64le-unknown-linux-"$LIBC" exit ;; ppcle:Linux:*:*) echo powerpcle-unknown-linux-"$LIBC" exit ;; riscv32:Linux:*:* | riscv64:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo "$UNAME_MACHINE"-ibm-linux-"$LIBC" exit ;; sh64*:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; sh*:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; tile*:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; vax:Linux:*:*) echo "$UNAME_MACHINE"-dec-linux-"$LIBC" exit ;; x86_64:Linux:*:*) if objdump -f /bin/sh | grep -q elf32-x86-64; then echo "$UNAME_MACHINE"-pc-linux-"$LIBC"x32 else echo "$UNAME_MACHINE"-pc-linux-"$LIBC" fi exit ;; xtensa*:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 exit ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo "$UNAME_MACHINE"-pc-sysv4.2uw"$UNAME_VERSION" exit ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo "$UNAME_MACHINE"-pc-os2-emx exit ;; i*86:XTS-300:*:STOP) echo "$UNAME_MACHINE"-unknown-stop exit ;; i*86:atheos:*:*) echo "$UNAME_MACHINE"-unknown-atheos exit ;; i*86:syllable:*:*) echo "$UNAME_MACHINE"-pc-syllable exit ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) echo i386-unknown-lynxos"$UNAME_RELEASE" exit ;; i*86:*DOS:*:*) echo "$UNAME_MACHINE"-pc-msdosdjgpp exit ;; i*86:*:4.*:*) UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo "$UNAME_MACHINE"-univel-sysv"$UNAME_REL" else echo "$UNAME_MACHINE"-pc-sysv"$UNAME_REL" fi exit ;; i*86:*:5:[678]*) # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo "$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}{$UNAME_VERSION}" exit ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo "$UNAME_MACHINE"-pc-sco"$UNAME_REL" else echo "$UNAME_MACHINE"-pc-sysv32 fi exit ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i586. # Note: whatever this is, it MUST be the same as what config.sub # prints for the "djgpp" host, or else GDB configure will decide that # this is a cross-build. echo i586-pc-msdosdjgpp exit ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit ;; paragon:*:*:*) echo i860-intel-osf1 exit ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv"$UNAME_RELEASE" # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv"$UNAME_RELEASE" # Unknown i860-SVR4 fi exit ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv exit ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix exit ;; M68*:*:R3V[5678]*:*) test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4; exit; } ;; NCR*:*:4.2:* | MPRAS*:*:4.2:*) OS_REL='.3' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos"$UNAME_RELEASE" exit ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos"$UNAME_RELEASE" exit ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos"$UNAME_RELEASE" exit ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) echo powerpc-unknown-lynxos"$UNAME_RELEASE" exit ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv"$UNAME_RELEASE" exit ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 exit ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo "$UNAME_MACHINE"-sni-sysv4 else echo ns32k-sni-sysv fi exit ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 exit ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit ;; i*86:VOS:*:*) # From Paul.Green@stratus.com. echo "$UNAME_MACHINE"-stratus-vos exit ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos exit ;; mc68*:A/UX:*:*) echo m68k-apple-aux"$UNAME_RELEASE" exit ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv"$UNAME_RELEASE" else echo mips-unknown-sysv"$UNAME_RELEASE" fi exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos exit ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit ;; BePC:Haiku:*:*) # Haiku running on Intel PC compatible. echo i586-pc-haiku exit ;; x86_64:Haiku:*:*) echo x86_64-unknown-haiku exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux"$UNAME_RELEASE" exit ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux"$UNAME_RELEASE" exit ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux"$UNAME_RELEASE" exit ;; SX-7:SUPER-UX:*:*) echo sx7-nec-superux"$UNAME_RELEASE" exit ;; SX-8:SUPER-UX:*:*) echo sx8-nec-superux"$UNAME_RELEASE" exit ;; SX-8R:SUPER-UX:*:*) echo sx8r-nec-superux"$UNAME_RELEASE" exit ;; SX-ACE:SUPER-UX:*:*) echo sxace-nec-superux"$UNAME_RELEASE" exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody"$UNAME_RELEASE" exit ;; *:Rhapsody:*:*) echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE" exit ;; *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown eval "$set_cc_for_build" if test "$UNAME_PROCESSOR" = unknown ; then UNAME_PROCESSOR=powerpc fi if test "`echo "$UNAME_RELEASE" | sed -e 's/\..*//'`" -le 10 ; then if [ "$CC_FOR_BUILD" != no_compiler_found ]; then if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then case $UNAME_PROCESSOR in i386) UNAME_PROCESSOR=x86_64 ;; powerpc) UNAME_PROCESSOR=powerpc64 ;; esac fi # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_PPC >/dev/null then UNAME_PROCESSOR=powerpc fi fi elif test "$UNAME_PROCESSOR" = i386 ; then # Avoid executing cc on OS X 10.9, as it ships with a stub # that puts up a graphical alert prompting to install # developer tools. Any system running Mac OS X 10.7 or # later (Darwin 11 and later) is required to have a 64-bit # processor. This is not true of the ARM version of Darwin # that Apple uses in portable devices. UNAME_PROCESSOR=x86_64 fi echo "$UNAME_PROCESSOR"-apple-darwin"$UNAME_RELEASE" exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = x86; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi echo "$UNAME_PROCESSOR"-"$UNAME_MACHINE"-nto-qnx"$UNAME_RELEASE" exit ;; *:QNX:*:4*) echo i386-pc-qnx exit ;; NEO-*:NONSTOP_KERNEL:*:*) echo neo-tandem-nsk"$UNAME_RELEASE" exit ;; NSE-*:NONSTOP_KERNEL:*:*) echo nse-tandem-nsk"$UNAME_RELEASE" exit ;; NSR-*:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk"$UNAME_RELEASE" exit ;; NSV-*:NONSTOP_KERNEL:*:*) echo nsv-tandem-nsk"$UNAME_RELEASE" exit ;; NSX-*:NONSTOP_KERNEL:*:*) echo nsx-tandem-nsk"$UNAME_RELEASE" exit ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux exit ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv exit ;; DS/*:UNIX_System_V:*:*) echo "$UNAME_MACHINE"-"$UNAME_SYSTEM"-"$UNAME_RELEASE" exit ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "$cputype" = 386; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" fi echo "$UNAME_MACHINE"-unknown-plan9 exit ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit ;; *:TENEX:*:*) echo pdp10-unknown-tenex exit ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 exit ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 exit ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 exit ;; *:ITS:*:*) echo pdp10-unknown-its exit ;; SEI:*:*:SEIUX) echo mips-sei-seiux"$UNAME_RELEASE" exit ;; *:DragonFly:*:*) echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" exit ;; *:*VMS:*:*) UNAME_MACHINE=`(uname -p) 2>/dev/null` case "$UNAME_MACHINE" in A*) echo alpha-dec-vms ; exit ;; I*) echo ia64-dec-vms ; exit ;; V*) echo vax-dec-vms ; exit ;; esac ;; *:XENIX:*:SysV) echo i386-pc-xenix exit ;; i*86:skyos:*:*) echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`" exit ;; i*86:rdos:*:*) echo "$UNAME_MACHINE"-pc-rdos exit ;; i*86:AROS:*:*) echo "$UNAME_MACHINE"-pc-aros exit ;; x86_64:VMkernel:*:*) echo "$UNAME_MACHINE"-unknown-esx exit ;; amd64:Isilon\ OneFS:*:*) echo x86_64-unknown-onefs exit ;; esac echo "$0: unable to guess system type" >&2 case "$UNAME_MACHINE:$UNAME_SYSTEM" in mips:Linux | mips64:Linux) # If we got here on MIPS GNU/Linux, output extra information. cat >&2 <&2 </dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = "$UNAME_MACHINE" UNAME_RELEASE = "$UNAME_RELEASE" UNAME_SYSTEM = "$UNAME_SYSTEM" UNAME_VERSION = "$UNAME_VERSION" EOF exit 1 # Local variables: # eval: (add-hook 'write-file-functions 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: libgeotiff-1.7.4/epsg_pcs.inc0000664000175000017500000012135714020740032013057 00000000000000/* * EPSG PCS Codes - GeoTIFF Rev 0.2 */ /* C database for Geotiff include files. */ /* the macro ValuePair() must be defined */ /* by the enclosing include file */ #ifdef INCLUDE_OLD_CODES #include old_pcs.inc #endif /* OLD Codes */ /* Newer PCS */ ValuePair(PCS_Hjorsey_1955_Lambert, 3053) ValuePair(PCS_ISN93_Lambert_1993, 3057) ValuePair(PCS_ETRS89_Poland_CS2000_zone_5,2176) ValuePair(PCS_ETRS89_Poland_CS2000_zone_6,2177) ValuePair(PCS_ETRS89_Poland_CS2000_zone_7,2177) ValuePair(PCS_ETRS89_Poland_CS2000_zone_8,2178) ValuePair(PCS_ETRS89_Poland_CS92,2180) /* New PCS */ ValuePair(PCS_GGRS87_Greek_Grid,2100) ValuePair(PCS_KKJ_Finland_zone_1,2391) ValuePair(PCS_KKJ_Finland_zone_2,2392) ValuePair(PCS_KKJ_Finland_zone_3,2393) ValuePair(PCS_KKJ_Finland_zone_4,2394) ValuePair(PCS_RT90_2_5_gon_W,2400) ValuePair(PCS_Lietuvos_Koordinoei_Sistema_1994,2600) ValuePair(PCS_Estonian_Coordinate_System_of_1992,3300) ValuePair(PCS_HD72_EOV,23700) ValuePair(PCS_Dealul_Piscului_1970_Stereo_70,31700) ValuePair(PCS_Adindan_UTM_zone_37N, 20137) ValuePair(PCS_Adindan_UTM_zone_38N, 20138) ValuePair(PCS_AGD66_AMG_zone_48, 20248) ValuePair(PCS_AGD66_AMG_zone_49, 20249) ValuePair(PCS_AGD66_AMG_zone_50, 20250) ValuePair(PCS_AGD66_AMG_zone_51, 20251) ValuePair(PCS_AGD66_AMG_zone_52, 20252) ValuePair(PCS_AGD66_AMG_zone_53, 20253) ValuePair(PCS_AGD66_AMG_zone_54, 20254) ValuePair(PCS_AGD66_AMG_zone_55, 20255) ValuePair(PCS_AGD66_AMG_zone_56, 20256) ValuePair(PCS_AGD66_AMG_zone_57, 20257) ValuePair(PCS_AGD66_AMG_zone_58, 20258) ValuePair(PCS_AGD84_AMG_zone_48, 20348) ValuePair(PCS_AGD84_AMG_zone_49, 20349) ValuePair(PCS_AGD84_AMG_zone_50, 20350) ValuePair(PCS_AGD84_AMG_zone_51, 20351) ValuePair(PCS_AGD84_AMG_zone_52, 20352) ValuePair(PCS_AGD84_AMG_zone_53, 20353) ValuePair(PCS_AGD84_AMG_zone_54, 20354) ValuePair(PCS_AGD84_AMG_zone_55, 20355) ValuePair(PCS_AGD84_AMG_zone_56, 20356) ValuePair(PCS_AGD84_AMG_zone_57, 20357) ValuePair(PCS_AGD84_AMG_zone_58, 20358) ValuePair(PCS_Ain_el_Abd_UTM_zone_37N, 20437) ValuePair(PCS_Ain_el_Abd_UTM_zone_38N, 20438) ValuePair(PCS_Ain_el_Abd_UTM_zone_39N, 20439) ValuePair(PCS_Ain_el_Abd_Bahrain_Grid, 20499) ValuePair(PCS_Afgooye_UTM_zone_38N, 20538) ValuePair(PCS_Afgooye_UTM_zone_39N, 20539) ValuePair(PCS_Lisbon_Portugese_Grid, 20700) ValuePair(PCS_Aratu_UTM_zone_22S, 20822) ValuePair(PCS_Aratu_UTM_zone_23S, 20823) ValuePair(PCS_Aratu_UTM_zone_24S, 20824) ValuePair(PCS_Arc_1950_Lo13, 20973) ValuePair(PCS_Arc_1950_Lo15, 20975) ValuePair(PCS_Arc_1950_Lo17, 20977) ValuePair(PCS_Arc_1950_Lo19, 20979) ValuePair(PCS_Arc_1950_Lo21, 20981) ValuePair(PCS_Arc_1950_Lo23, 20983) ValuePair(PCS_Arc_1950_Lo25, 20985) ValuePair(PCS_Arc_1950_Lo27, 20987) ValuePair(PCS_Arc_1950_Lo29, 20989) ValuePair(PCS_Arc_1950_Lo31, 20991) ValuePair(PCS_Arc_1950_Lo33, 20993) ValuePair(PCS_Arc_1950_Lo35, 20995) ValuePair(PCS_Batavia_NEIEZ, 21100) ValuePair(PCS_Batavia_UTM_zone_48S, 21148) ValuePair(PCS_Batavia_UTM_zone_49S, 21149) ValuePair(PCS_Batavia_UTM_zone_50S, 21150) ValuePair(PCS_Beijing_Gauss_zone_13, 21413) ValuePair(PCS_Beijing_Gauss_zone_14, 21414) ValuePair(PCS_Beijing_Gauss_zone_15, 21415) ValuePair(PCS_Beijing_Gauss_zone_16, 21416) ValuePair(PCS_Beijing_Gauss_zone_17, 21417) ValuePair(PCS_Beijing_Gauss_zone_18, 21418) ValuePair(PCS_Beijing_Gauss_zone_19, 21419) ValuePair(PCS_Beijing_Gauss_zone_20, 21420) ValuePair(PCS_Beijing_Gauss_zone_21, 21421) ValuePair(PCS_Beijing_Gauss_zone_22, 21422) ValuePair(PCS_Beijing_Gauss_zone_23, 21423) ValuePair(PCS_Beijing_Gauss_13N, 21473) ValuePair(PCS_Beijing_Gauss_14N, 21474) ValuePair(PCS_Beijing_Gauss_15N, 21475) ValuePair(PCS_Beijing_Gauss_16N, 21476) ValuePair(PCS_Beijing_Gauss_17N, 21477) ValuePair(PCS_Beijing_Gauss_18N, 21478) ValuePair(PCS_Beijing_Gauss_19N, 21479) ValuePair(PCS_Beijing_Gauss_20N, 21480) ValuePair(PCS_Beijing_Gauss_21N, 21481) ValuePair(PCS_Beijing_Gauss_22N, 21482) ValuePair(PCS_Beijing_Gauss_23N, 21483) ValuePair(PCS_Belge_Lambert_50, 21500) ValuePair(PCS_Bern_1898_Swiss_Old, 21790) ValuePair(PCS_Bogota_UTM_zone_17N, 21817) ValuePair(PCS_Bogota_UTM_zone_18N, 21818) ValuePair(PCS_Bogota_Colombia_3W, 21891) ValuePair(PCS_Bogota_Colombia_Bogota, 21892) ValuePair(PCS_Bogota_Colombia_3E, 21893) ValuePair(PCS_Bogota_Colombia_6E, 21894) ValuePair(PCS_Camacupa_UTM_32S, 22032) ValuePair(PCS_Camacupa_UTM_33S, 22033) ValuePair(PCS_C_Inchauspe_Argentina_1, 22191) ValuePair(PCS_C_Inchauspe_Argentina_2, 22192) ValuePair(PCS_C_Inchauspe_Argentina_3, 22193) ValuePair(PCS_C_Inchauspe_Argentina_4, 22194) ValuePair(PCS_C_Inchauspe_Argentina_5, 22195) ValuePair(PCS_C_Inchauspe_Argentina_6, 22196) ValuePair(PCS_C_Inchauspe_Argentina_7, 22197) ValuePair(PCS_Carthage_UTM_zone_32N, 22332) ValuePair(PCS_Carthage_Nord_Tunisie, 22391) ValuePair(PCS_Carthage_Sud_Tunisie, 22392) ValuePair(PCS_Corrego_Alegre_UTM_23S, 22523) ValuePair(PCS_Corrego_Alegre_UTM_24S, 22524) ValuePair(PCS_Douala_UTM_zone_32N, 22832) ValuePair(PCS_Egypt_1907_Red_Belt, 22992) ValuePair(PCS_Egypt_1907_Purple_Belt, 22993) ValuePair(PCS_Egypt_1907_Ext_Purple, 22994) ValuePair(PCS_ED50_UTM_zone_28N, 23028) ValuePair(PCS_ED50_UTM_zone_29N, 23029) ValuePair(PCS_ED50_UTM_zone_30N, 23030) ValuePair(PCS_ED50_UTM_zone_31N, 23031) ValuePair(PCS_ED50_UTM_zone_32N, 23032) ValuePair(PCS_ED50_UTM_zone_33N, 23033) ValuePair(PCS_ED50_UTM_zone_34N, 23034) ValuePair(PCS_ED50_UTM_zone_35N, 23035) ValuePair(PCS_ED50_UTM_zone_36N, 23036) ValuePair(PCS_ED50_UTM_zone_37N, 23037) ValuePair(PCS_ED50_UTM_zone_38N, 23038) ValuePair(PCS_Fahud_UTM_zone_39N, 23239) ValuePair(PCS_Fahud_UTM_zone_40N, 23240) ValuePair(PCS_Garoua_UTM_zone_33N, 23433) ValuePair(PCS_ID74_UTM_zone_46N, 23846) ValuePair(PCS_ID74_UTM_zone_47N, 23847) ValuePair(PCS_ID74_UTM_zone_48N, 23848) ValuePair(PCS_ID74_UTM_zone_49N, 23849) ValuePair(PCS_ID74_UTM_zone_50N, 23850) ValuePair(PCS_ID74_UTM_zone_51N, 23851) ValuePair(PCS_ID74_UTM_zone_52N, 23852) ValuePair(PCS_ID74_UTM_zone_53N, 23853) ValuePair(PCS_ID74_UTM_zone_46S, 23886) ValuePair(PCS_ID74_UTM_zone_47S, 23887) ValuePair(PCS_ID74_UTM_zone_48S, 23888) ValuePair(PCS_ID74_UTM_zone_49S, 23889) ValuePair(PCS_ID74_UTM_zone_50S, 23890) ValuePair(PCS_ID74_UTM_zone_51S, 23891) ValuePair(PCS_ID74_UTM_zone_52S, 23892) ValuePair(PCS_ID74_UTM_zone_53S, 23893) ValuePair(PCS_ID74_UTM_zone_54S, 23894) ValuePair(PCS_Indian_1954_UTM_47N, 23947) ValuePair(PCS_Indian_1954_UTM_48N, 23948) ValuePair(PCS_Indian_1975_UTM_47N, 24047) ValuePair(PCS_Indian_1975_UTM_48N, 24048) ValuePair(PCS_Jamaica_1875_Old_Grid, 24100) ValuePair(PCS_JAD69_Jamaica_Grid, 24200) ValuePair(PCS_Kalianpur_India_0, 24370) ValuePair(PCS_Kalianpur_India_I, 24371) ValuePair(PCS_Kalianpur_India_IIa, 24372) ValuePair(PCS_Kalianpur_India_IIIa, 24373) ValuePair(PCS_Kalianpur_India_IVa, 24374) ValuePair(PCS_Kalianpur_India_IIb, 24382) ValuePair(PCS_Kalianpur_India_IIIb, 24383) ValuePair(PCS_Kalianpur_India_IVb, 24384) ValuePair(PCS_Kertau_Singapore_Grid, 24500) ValuePair(PCS_Kertau_UTM_zone_47N, 24547) ValuePair(PCS_Kertau_UTM_zone_48N, 24548) ValuePair(PCS_La_Canoa_UTM_zone_20N, 24720) ValuePair(PCS_La_Canoa_UTM_zone_21N, 24721) ValuePair(PCS_PSAD56_UTM_zone_18N, 24818) ValuePair(PCS_PSAD56_UTM_zone_19N, 24819) ValuePair(PCS_PSAD56_UTM_zone_20N, 24820) ValuePair(PCS_PSAD56_UTM_zone_21N, 24821) ValuePair(PCS_PSAD56_UTM_zone_17S, 24877) ValuePair(PCS_PSAD56_UTM_zone_18S, 24878) ValuePair(PCS_PSAD56_UTM_zone_19S, 24879) ValuePair(PCS_PSAD56_UTM_zone_20S, 24880) ValuePair(PCS_PSAD56_Peru_west_zone, 24891) ValuePair(PCS_PSAD56_Peru_central, 24892) ValuePair(PCS_PSAD56_Peru_east_zone, 24893) ValuePair(PCS_Leigon_Ghana_Grid, 25000) ValuePair(PCS_Lome_UTM_zone_31N, 25231) ValuePair(PCS_Luzon_Philippines_I, 25391) ValuePair(PCS_Luzon_Philippines_II, 25392) ValuePair(PCS_Luzon_Philippines_III, 25393) ValuePair(PCS_Luzon_Philippines_IV, 25394) ValuePair(PCS_Luzon_Philippines_V, 25395) ValuePair(PCS_Makassar_NEIEZ, 25700) ValuePair(PCS_Malongo_1987_UTM_32S, 25932) ValuePair(PCS_Merchich_Nord_Maroc, 26191) ValuePair(PCS_Merchich_Sud_Maroc, 26192) ValuePair(PCS_Merchich_Sahara, 26193) ValuePair(PCS_Massawa_UTM_zone_37N, 26237) ValuePair(PCS_Minna_UTM_zone_31N, 26331) ValuePair(PCS_Minna_UTM_zone_32N, 26332) ValuePair(PCS_Minna_Nigeria_West, 26391) ValuePair(PCS_Minna_Nigeria_Mid_Belt, 26392) ValuePair(PCS_Minna_Nigeria_East, 26393) ValuePair(PCS_Mhast_UTM_zone_32S, 26432) ValuePair(PCS_Monte_Mario_Italy_1, 26591) ValuePair(PCS_Monte_Mario_Italy_2, 26592) ValuePair(PCS_M_poraloko_UTM_32N, 26632) ValuePair(PCS_M_poraloko_UTM_32S, 26692) ValuePair(PCS_NAD27_UTM_zone_3N, 26703) ValuePair(PCS_NAD27_UTM_zone_4N, 26704) ValuePair(PCS_NAD27_UTM_zone_5N, 26705) ValuePair(PCS_NAD27_UTM_zone_6N, 26706) ValuePair(PCS_NAD27_UTM_zone_7N, 26707) ValuePair(PCS_NAD27_UTM_zone_8N, 26708) ValuePair(PCS_NAD27_UTM_zone_9N, 26709) ValuePair(PCS_NAD27_UTM_zone_10N, 26710) ValuePair(PCS_NAD27_UTM_zone_11N, 26711) ValuePair(PCS_NAD27_UTM_zone_12N, 26712) ValuePair(PCS_NAD27_UTM_zone_13N, 26713) ValuePair(PCS_NAD27_UTM_zone_14N, 26714) ValuePair(PCS_NAD27_UTM_zone_15N, 26715) ValuePair(PCS_NAD27_UTM_zone_16N, 26716) ValuePair(PCS_NAD27_UTM_zone_17N, 26717) ValuePair(PCS_NAD27_UTM_zone_18N, 26718) ValuePair(PCS_NAD27_UTM_zone_19N, 26719) ValuePair(PCS_NAD27_UTM_zone_20N, 26720) ValuePair(PCS_NAD27_UTM_zone_21N, 26721) ValuePair(PCS_NAD27_UTM_zone_22N, 26722) ValuePair(PCS_NAD27_Alabama_East, 26729) ValuePair(PCS_NAD27_Alabama_West, 26730) ValuePair(PCS_NAD27_Alaska_zone_1, 26731) ValuePair(PCS_NAD27_Alaska_zone_2, 26732) ValuePair(PCS_NAD27_Alaska_zone_3, 26733) ValuePair(PCS_NAD27_Alaska_zone_4, 26734) ValuePair(PCS_NAD27_Alaska_zone_5, 26735) ValuePair(PCS_NAD27_Alaska_zone_6, 26736) ValuePair(PCS_NAD27_Alaska_zone_7, 26737) ValuePair(PCS_NAD27_Alaska_zone_8, 26738) ValuePair(PCS_NAD27_Alaska_zone_9, 26739) ValuePair(PCS_NAD27_Alaska_zone_10, 26740) ValuePair(PCS_NAD27_California_I, 26741) ValuePair(PCS_NAD27_California_II, 26742) ValuePair(PCS_NAD27_California_III, 26743) ValuePair(PCS_NAD27_California_IV, 26744) ValuePair(PCS_NAD27_California_V, 26745) ValuePair(PCS_NAD27_California_VI, 26746) ValuePair(PCS_NAD27_California_VII, 26747) ValuePair(PCS_NAD27_Arizona_East, 26748) ValuePair(PCS_NAD27_Arizona_Central, 26749) ValuePair(PCS_NAD27_Arizona_West, 26750) ValuePair(PCS_NAD27_Arkansas_North, 26751) ValuePair(PCS_NAD27_Arkansas_South, 26752) ValuePair(PCS_NAD27_Colorado_North, 26753) ValuePair(PCS_NAD27_Colorado_Central, 26754) ValuePair(PCS_NAD27_Colorado_South, 26755) ValuePair(PCS_NAD27_Connecticut, 26756) ValuePair(PCS_NAD27_Delaware, 26757) ValuePair(PCS_NAD27_Florida_East, 26758) ValuePair(PCS_NAD27_Florida_West, 26759) ValuePair(PCS_NAD27_Florida_North, 26760) ValuePair(PCS_NAD27_Hawaii_zone_1, 26761) ValuePair(PCS_NAD27_Hawaii_zone_2, 26762) ValuePair(PCS_NAD27_Hawaii_zone_3, 26763) ValuePair(PCS_NAD27_Hawaii_zone_4, 26764) ValuePair(PCS_NAD27_Hawaii_zone_5, 26765) ValuePair(PCS_NAD27_Georgia_East, 26766) ValuePair(PCS_NAD27_Georgia_West, 26767) ValuePair(PCS_NAD27_Idaho_East, 26768) ValuePair(PCS_NAD27_Idaho_Central, 26769) ValuePair(PCS_NAD27_Idaho_West, 26770) ValuePair(PCS_NAD27_Illinois_East, 26771) ValuePair(PCS_NAD27_Illinois_West, 26772) ValuePair(PCS_NAD27_Indiana_East, 26773) ValuePair(PCS_NAD27_BLM_14N_feet, 26774) ValuePair(PCS_NAD27_Indiana_West, 26774) ValuePair(PCS_NAD27_BLM_15N_feet, 26775) ValuePair(PCS_NAD27_Iowa_North, 26775) ValuePair(PCS_NAD27_BLM_16N_feet, 26776) ValuePair(PCS_NAD27_Iowa_South, 26776) ValuePair(PCS_NAD27_BLM_17N_feet, 26777) ValuePair(PCS_NAD27_Kansas_North, 26777) ValuePair(PCS_NAD27_Kansas_South, 26778) ValuePair(PCS_NAD27_Kentucky_North, 26779) ValuePair(PCS_NAD27_Kentucky_South, 26780) ValuePair(PCS_NAD27_Louisiana_North, 26781) ValuePair(PCS_NAD27_Louisiana_South, 26782) ValuePair(PCS_NAD27_Maine_East, 26783) ValuePair(PCS_NAD27_Maine_West, 26784) ValuePair(PCS_NAD27_Maryland, 26785) ValuePair(PCS_NAD27_Massachusetts, 26786) ValuePair(PCS_NAD27_Massachusetts_Is, 26787) ValuePair(PCS_NAD27_Michigan_North, 26788) ValuePair(PCS_NAD27_Michigan_Central, 26789) ValuePair(PCS_NAD27_Michigan_South, 26790) ValuePair(PCS_NAD27_Minnesota_North, 26791) ValuePair(PCS_NAD27_Minnesota_Cent, 26792) ValuePair(PCS_NAD27_Minnesota_South, 26793) ValuePair(PCS_NAD27_Mississippi_East, 26794) ValuePair(PCS_NAD27_Mississippi_West, 26795) ValuePair(PCS_NAD27_Missouri_East, 26796) ValuePair(PCS_NAD27_Missouri_Central, 26797) ValuePair(PCS_NAD27_Missouri_West, 26798) ValuePair(PCS_NAD_Michigan_Michigan_East, 26801) ValuePair(PCS_NAD_Michigan_Michigan_Old_Central, 26802) ValuePair(PCS_NAD_Michigan_Michigan_West, 26803) ValuePair(PCS_NAD83_UTM_zone_3N, 26903) ValuePair(PCS_NAD83_UTM_zone_4N, 26904) ValuePair(PCS_NAD83_UTM_zone_5N, 26905) ValuePair(PCS_NAD83_UTM_zone_6N, 26906) ValuePair(PCS_NAD83_UTM_zone_7N, 26907) ValuePair(PCS_NAD83_UTM_zone_8N, 26908) ValuePair(PCS_NAD83_UTM_zone_9N, 26909) ValuePair(PCS_NAD83_UTM_zone_10N, 26910) ValuePair(PCS_NAD83_UTM_zone_11N, 26911) ValuePair(PCS_NAD83_UTM_zone_12N, 26912) ValuePair(PCS_NAD83_UTM_zone_13N, 26913) ValuePair(PCS_NAD83_UTM_zone_14N, 26914) ValuePair(PCS_NAD83_UTM_zone_15N, 26915) ValuePair(PCS_NAD83_UTM_zone_16N, 26916) ValuePair(PCS_NAD83_UTM_zone_17N, 26917) ValuePair(PCS_NAD83_UTM_zone_18N, 26918) ValuePair(PCS_NAD83_UTM_zone_19N, 26919) ValuePair(PCS_NAD83_UTM_zone_20N, 26920) ValuePair(PCS_NAD83_UTM_zone_21N, 26921) ValuePair(PCS_NAD83_UTM_zone_22N, 26922) ValuePair(PCS_NAD83_UTM_zone_23N, 26923) ValuePair(PCS_NAD83_Alabama_East, 26929) ValuePair(PCS_NAD83_Alabama_West, 26930) ValuePair(PCS_NAD83_Alaska_zone_1, 26931) ValuePair(PCS_NAD83_Alaska_zone_2, 26932) ValuePair(PCS_NAD83_Alaska_zone_3, 26933) ValuePair(PCS_NAD83_Alaska_zone_4, 26934) ValuePair(PCS_NAD83_Alaska_zone_5, 26935) ValuePair(PCS_NAD83_Alaska_zone_6, 26936) ValuePair(PCS_NAD83_Alaska_zone_7, 26937) ValuePair(PCS_NAD83_Alaska_zone_8, 26938) ValuePair(PCS_NAD83_Alaska_zone_9, 26939) ValuePair(PCS_NAD83_Alaska_zone_10, 26940) ValuePair(PCS_NAD83_California_1, 26941) ValuePair(PCS_NAD83_California_2, 26942) ValuePair(PCS_NAD83_California_3, 26943) ValuePair(PCS_NAD83_California_4, 26944) ValuePair(PCS_NAD83_California_5, 26945) ValuePair(PCS_NAD83_California_6, 26946) ValuePair(PCS_NAD83_Arizona_East, 26948) ValuePair(PCS_NAD83_Arizona_Central, 26949) ValuePair(PCS_NAD83_Arizona_West, 26950) ValuePair(PCS_NAD83_Arkansas_North, 26951) ValuePair(PCS_NAD83_Arkansas_South, 26952) ValuePair(PCS_NAD83_Colorado_North, 26953) ValuePair(PCS_NAD83_Colorado_Central, 26954) ValuePair(PCS_NAD83_Colorado_South, 26955) ValuePair(PCS_NAD83_Connecticut, 26956) ValuePair(PCS_NAD83_Delaware, 26957) ValuePair(PCS_NAD83_Florida_East, 26958) ValuePair(PCS_NAD83_Florida_West, 26959) ValuePair(PCS_NAD83_Florida_North, 26960) ValuePair(PCS_NAD83_Hawaii_zone_1, 26961) ValuePair(PCS_NAD83_Hawaii_zone_2, 26962) ValuePair(PCS_NAD83_Hawaii_zone_3, 26963) ValuePair(PCS_NAD83_Hawaii_zone_4, 26964) ValuePair(PCS_NAD83_Hawaii_zone_5, 26965) ValuePair(PCS_NAD83_Georgia_East, 26966) ValuePair(PCS_NAD83_Georgia_West, 26967) ValuePair(PCS_NAD83_Idaho_East, 26968) ValuePair(PCS_NAD83_Idaho_Central, 26969) ValuePair(PCS_NAD83_Idaho_West, 26970) ValuePair(PCS_NAD83_Illinois_East, 26971) ValuePair(PCS_NAD83_Illinois_West, 26972) ValuePair(PCS_NAD83_Indiana_East, 26973) ValuePair(PCS_NAD83_Indiana_West, 26974) ValuePair(PCS_NAD83_Iowa_North, 26975) ValuePair(PCS_NAD83_Iowa_South, 26976) ValuePair(PCS_NAD83_Kansas_North, 26977) ValuePair(PCS_NAD83_Kansas_South, 26978) ValuePair(PCS_NAD83_Kentucky_North, 2205) ValuePair(PCS_NAD83_Kentucky_South, 26980) ValuePair(PCS_NAD83_Louisiana_North, 26981) ValuePair(PCS_NAD83_Louisiana_South, 26982) ValuePair(PCS_NAD83_Maine_East, 26983) ValuePair(PCS_NAD83_Maine_West, 26984) ValuePair(PCS_NAD83_Maryland, 26985) ValuePair(PCS_NAD83_Massachusetts, 26986) ValuePair(PCS_NAD83_Massachusetts_Is, 26987) ValuePair(PCS_NAD83_Michigan_North, 26988) ValuePair(PCS_NAD83_Michigan_Central, 26989) ValuePair(PCS_NAD83_Michigan_South, 26990) ValuePair(PCS_NAD83_Minnesota_North, 26991) ValuePair(PCS_NAD83_Minnesota_Cent, 26992) ValuePair(PCS_NAD83_Minnesota_South, 26993) ValuePair(PCS_NAD83_Mississippi_East, 26994) ValuePair(PCS_NAD83_Mississippi_West, 26995) ValuePair(PCS_NAD83_Missouri_East, 26996) ValuePair(PCS_NAD83_Missouri_Central, 26997) ValuePair(PCS_NAD83_Missouri_West, 26998) ValuePair(PCS_Nahrwan_1967_UTM_38N, 27038) ValuePair(PCS_Nahrwan_1967_UTM_39N, 27039) ValuePair(PCS_Nahrwan_1967_UTM_40N, 27040) ValuePair(PCS_Naparima_UTM_20N, 27120) ValuePair(PCS_GD49_NZ_Map_Grid, 27200) ValuePair(PCS_GD49_North_Island_Grid, 27291) ValuePair(PCS_GD49_South_Island_Grid, 27292) ValuePair(PCS_Datum_73_UTM_zone_29N, 27429) ValuePair(PCS_ATF_Nord_de_Guerre, 27500) ValuePair(PCS_NTF_France_I, 27581) ValuePair(PCS_NTF_France_II, 27582) ValuePair(PCS_NTF_France_III, 27583) ValuePair(PCS_NTF_Nord_France, 27591) ValuePair(PCS_NTF_Centre_France, 27592) ValuePair(PCS_NTF_Sud_France, 27593) ValuePair(PCS_British_National_Grid, 27700) ValuePair(PCS_Point_Noire_UTM_32S, 28232) ValuePair(PCS_GDA94_MGA_zone_48, 28348) ValuePair(PCS_GDA94_MGA_zone_49, 28349) ValuePair(PCS_GDA94_MGA_zone_50, 28350) ValuePair(PCS_GDA94_MGA_zone_51, 28351) ValuePair(PCS_GDA94_MGA_zone_52, 28352) ValuePair(PCS_GDA94_MGA_zone_53, 28353) ValuePair(PCS_GDA94_MGA_zone_54, 28354) ValuePair(PCS_GDA94_MGA_zone_55, 28355) ValuePair(PCS_GDA94_MGA_zone_56, 28356) ValuePair(PCS_GDA94_MGA_zone_57, 28357) ValuePair(PCS_GDA94_MGA_zone_58, 28358) ValuePair(PCS_Pulkovo_Gauss_zone_4, 28404) ValuePair(PCS_Pulkovo_Gauss_zone_5, 28405) ValuePair(PCS_Pulkovo_Gauss_zone_6, 28406) ValuePair(PCS_Pulkovo_Gauss_zone_7, 28407) ValuePair(PCS_Pulkovo_Gauss_zone_8, 28408) ValuePair(PCS_Pulkovo_Gauss_zone_9, 28409) ValuePair(PCS_Pulkovo_Gauss_zone_10, 28410) ValuePair(PCS_Pulkovo_Gauss_zone_11, 28411) ValuePair(PCS_Pulkovo_Gauss_zone_12, 28412) ValuePair(PCS_Pulkovo_Gauss_zone_13, 28413) ValuePair(PCS_Pulkovo_Gauss_zone_14, 28414) ValuePair(PCS_Pulkovo_Gauss_zone_15, 28415) ValuePair(PCS_Pulkovo_Gauss_zone_16, 28416) ValuePair(PCS_Pulkovo_Gauss_zone_17, 28417) ValuePair(PCS_Pulkovo_Gauss_zone_18, 28418) ValuePair(PCS_Pulkovo_Gauss_zone_19, 28419) ValuePair(PCS_Pulkovo_Gauss_zone_20, 28420) ValuePair(PCS_Pulkovo_Gauss_zone_21, 28421) ValuePair(PCS_Pulkovo_Gauss_zone_22, 28422) ValuePair(PCS_Pulkovo_Gauss_zone_23, 28423) ValuePair(PCS_Pulkovo_Gauss_zone_24, 28424) ValuePair(PCS_Pulkovo_Gauss_zone_25, 28425) ValuePair(PCS_Pulkovo_Gauss_zone_26, 28426) ValuePair(PCS_Pulkovo_Gauss_zone_27, 28427) ValuePair(PCS_Pulkovo_Gauss_zone_28, 28428) ValuePair(PCS_Pulkovo_Gauss_zone_29, 28429) ValuePair(PCS_Pulkovo_Gauss_zone_30, 28430) ValuePair(PCS_Pulkovo_Gauss_zone_31, 28431) ValuePair(PCS_Pulkovo_Gauss_zone_32, 28432) ValuePair(PCS_Pulkovo_Gauss_4N, 28464) ValuePair(PCS_Pulkovo_Gauss_5N, 28465) ValuePair(PCS_Pulkovo_Gauss_6N, 28466) ValuePair(PCS_Pulkovo_Gauss_7N, 28467) ValuePair(PCS_Pulkovo_Gauss_8N, 28468) ValuePair(PCS_Pulkovo_Gauss_9N, 28469) ValuePair(PCS_Pulkovo_Gauss_10N, 28470) ValuePair(PCS_Pulkovo_Gauss_11N, 28471) ValuePair(PCS_Pulkovo_Gauss_12N, 28472) ValuePair(PCS_Pulkovo_Gauss_13N, 28473) ValuePair(PCS_Pulkovo_Gauss_14N, 28474) ValuePair(PCS_Pulkovo_Gauss_15N, 28475) ValuePair(PCS_Pulkovo_Gauss_16N, 28476) ValuePair(PCS_Pulkovo_Gauss_17N, 28477) ValuePair(PCS_Pulkovo_Gauss_18N, 28478) ValuePair(PCS_Pulkovo_Gauss_19N, 28479) ValuePair(PCS_Pulkovo_Gauss_20N, 28480) ValuePair(PCS_Pulkovo_Gauss_21N, 28481) ValuePair(PCS_Pulkovo_Gauss_22N, 28482) ValuePair(PCS_Pulkovo_Gauss_23N, 28483) ValuePair(PCS_Pulkovo_Gauss_24N, 28484) ValuePair(PCS_Pulkovo_Gauss_25N, 28485) ValuePair(PCS_Pulkovo_Gauss_26N, 28486) ValuePair(PCS_Pulkovo_Gauss_27N, 28487) ValuePair(PCS_Pulkovo_Gauss_28N, 28488) ValuePair(PCS_Pulkovo_Gauss_29N, 28489) ValuePair(PCS_Pulkovo_Gauss_30N, 28490) ValuePair(PCS_Pulkovo_Gauss_31N, 28491) ValuePair(PCS_Pulkovo_Gauss_32N, 28492) ValuePair(PCS_Qatar_National_Grid, 28600) ValuePair(PCS_RD_Netherlands_Old, 28991) ValuePair(PCS_RD_Netherlands_New, 28992) ValuePair(PCS_SAD69_UTM_zone_18N, 29118) ValuePair(PCS_SAD69_UTM_zone_19N, 29119) ValuePair(PCS_SAD69_UTM_zone_20N, 29120) ValuePair(PCS_SAD69_UTM_zone_21N, 29121) ValuePair(PCS_SAD69_UTM_zone_22N, 29122) ValuePair(PCS_SAD69_UTM_zone_17S, 29177) ValuePair(PCS_SAD69_UTM_zone_18S, 29178) ValuePair(PCS_SAD69_UTM_zone_19S, 29179) ValuePair(PCS_SAD69_UTM_zone_20S, 29180) ValuePair(PCS_SAD69_UTM_zone_21S, 29181) ValuePair(PCS_SAD69_UTM_zone_22S, 29182) ValuePair(PCS_SAD69_UTM_zone_23S, 29183) ValuePair(PCS_SAD69_UTM_zone_24S, 29184) ValuePair(PCS_SAD69_UTM_zone_25S, 29185) ValuePair(PCS_Sapper_Hill_UTM_20S, 29220) ValuePair(PCS_Sapper_Hill_UTM_21S, 29221) ValuePair(PCS_Schwarzeck_UTM_33S, 29333) ValuePair(PCS_Sudan_UTM_zone_35N, 29635) ValuePair(PCS_Sudan_UTM_zone_36N, 29636) ValuePair(PCS_Tananarive_Laborde, 29700) ValuePair(PCS_Tananarive_UTM_38S, 29738) ValuePair(PCS_Tananarive_UTM_39S, 29739) ValuePair(PCS_Timbalai_1948_Borneo, 29800) ValuePair(PCS_Timbalai_1948_UTM_49N, 29849) ValuePair(PCS_Timbalai_1948_UTM_50N, 29850) ValuePair(PCS_TM65_Irish_Nat_Grid, 29900) ValuePair(PCS_Trinidad_1903_Trinidad, 30200) ValuePair(PCS_TC_1948_UTM_zone_39N, 30339) ValuePair(PCS_TC_1948_UTM_zone_40N, 30340) ValuePair(PCS_Voirol_N_Algerie_ancien, 30491) ValuePair(PCS_Voirol_S_Algerie_ancien, 30492) ValuePair(PCS_Voirol_Unifie_N_Algerie, 30591) ValuePair(PCS_Voirol_Unifie_S_Algerie, 30592) ValuePair(PCS_Bern_1938_Swiss_New, 30600) ValuePair(PCS_Nord_Sahara_UTM_29N, 30729) ValuePair(PCS_Nord_Sahara_UTM_30N, 30730) ValuePair(PCS_Nord_Sahara_UTM_31N, 30731) ValuePair(PCS_Nord_Sahara_UTM_32N, 30732) ValuePair(PCS_Yoff_UTM_zone_28N, 31028) ValuePair(PCS_Zanderij_UTM_zone_21N, 31121) ValuePair(PCS_MGI_Austria_West, 31291) ValuePair(PCS_MGI_Austria_Central, 31292) ValuePair(PCS_MGI_Austria_East, 31293) ValuePair(PCS_Belge_Lambert_72, 31300) ValuePair(PCS_DHDN_Germany_zone_1, 31491) ValuePair(PCS_DHDN_Germany_zone_2, 31492) ValuePair(PCS_DHDN_Germany_zone_3, 31493) ValuePair(PCS_DHDN_Germany_zone_4, 31494) ValuePair(PCS_DHDN_Germany_zone_5, 31495) ValuePair(PCS_NAD27_Montana_North, 32001) ValuePair(PCS_NAD27_Montana_Central, 32002) ValuePair(PCS_NAD27_Montana_South, 32003) ValuePair(PCS_NAD27_Nebraska_North, 32005) ValuePair(PCS_NAD27_Nebraska_South, 32006) ValuePair(PCS_NAD27_Nevada_East, 32007) ValuePair(PCS_NAD27_Nevada_Central, 32008) ValuePair(PCS_NAD27_Nevada_West, 32009) ValuePair(PCS_NAD27_New_Hampshire, 32010) ValuePair(PCS_NAD27_New_Jersey, 32011) ValuePair(PCS_NAD27_New_Mexico_East, 32012) ValuePair(PCS_NAD27_New_Mexico_Cent, 32013) ValuePair(PCS_NAD27_New_Mexico_West, 32014) ValuePair(PCS_NAD27_New_York_East, 32015) ValuePair(PCS_NAD27_New_York_Central, 32016) ValuePair(PCS_NAD27_New_York_West, 32017) ValuePair(PCS_NAD27_New_York_Long_Is, 32018) ValuePair(PCS_NAD27_North_Carolina, 32019) ValuePair(PCS_NAD27_North_Dakota_N, 32020) ValuePair(PCS_NAD27_North_Dakota_S, 32021) ValuePair(PCS_NAD27_Ohio_North, 32022) ValuePair(PCS_NAD27_Ohio_South, 32023) ValuePair(PCS_NAD27_Oklahoma_North, 32024) ValuePair(PCS_NAD27_Oklahoma_South, 32025) ValuePair(PCS_NAD27_Oregon_North, 32026) ValuePair(PCS_NAD27_Oregon_South, 32027) ValuePair(PCS_NAD27_Pennsylvania_N, 32028) ValuePair(PCS_NAD27_Pennsylvania_S, 32029) ValuePair(PCS_NAD27_Rhode_Island, 32030) ValuePair(PCS_NAD27_South_Carolina_N, 32031) ValuePair(PCS_NAD27_South_Carolina_S, 32033) ValuePair(PCS_NAD27_South_Dakota_N, 32034) ValuePair(PCS_NAD27_South_Dakota_S, 32035) ValuePair(PCS_NAD27_Tennessee, 2204) ValuePair(PCS_NAD27_Texas_North, 32037) ValuePair(PCS_NAD27_Texas_North_Cen, 32038) ValuePair(PCS_NAD27_Texas_Central, 32039) ValuePair(PCS_NAD27_Texas_South_Cen, 32040) ValuePair(PCS_NAD27_Texas_South, 32041) ValuePair(PCS_NAD27_Utah_North, 32042) ValuePair(PCS_NAD27_Utah_Central, 32043) ValuePair(PCS_NAD27_Utah_South, 32044) ValuePair(PCS_NAD27_Vermont, 32045) ValuePair(PCS_NAD27_Virginia_North, 32046) ValuePair(PCS_NAD27_Virginia_South, 32047) ValuePair(PCS_NAD27_Washington_North, 32048) ValuePair(PCS_NAD27_Washington_South, 32049) ValuePair(PCS_NAD27_West_Virginia_N, 32050) ValuePair(PCS_NAD27_West_Virginia_S, 32051) ValuePair(PCS_NAD27_Wisconsin_North, 32052) ValuePair(PCS_NAD27_Wisconsin_Cen, 32053) ValuePair(PCS_NAD27_Wisconsin_South, 32054) ValuePair(PCS_NAD27_Wyoming_East, 32055) ValuePair(PCS_NAD27_Wyoming_E_Cen, 32056) ValuePair(PCS_NAD27_Wyoming_W_Cen, 32057) ValuePair(PCS_NAD27_Wyoming_West, 32058) ValuePair(PCS_NAD27_Puerto_Rico, 32059) ValuePair(PCS_NAD27_St_Croix, 32060) ValuePair(PCS_NAD83_Montana, 32100) ValuePair(PCS_NAD83_Nebraska, 32104) ValuePair(PCS_NAD83_Nevada_East, 32107) ValuePair(PCS_NAD83_Nevada_Central, 32108) ValuePair(PCS_NAD83_Nevada_West, 32109) ValuePair(PCS_NAD83_New_Hampshire, 32110) ValuePair(PCS_NAD83_New_Jersey, 32111) ValuePair(PCS_NAD83_New_Mexico_East, 32112) ValuePair(PCS_NAD83_New_Mexico_Cent, 32113) ValuePair(PCS_NAD83_New_Mexico_West, 32114) ValuePair(PCS_NAD83_New_York_East, 32115) ValuePair(PCS_NAD83_New_York_Central, 32116) ValuePair(PCS_NAD83_New_York_West, 32117) ValuePair(PCS_NAD83_New_York_Long_Is, 32118) ValuePair(PCS_NAD83_North_Carolina, 32119) ValuePair(PCS_NAD83_North_Dakota_N, 32120) ValuePair(PCS_NAD83_North_Dakota_S, 32121) ValuePair(PCS_NAD83_Ohio_North, 32122) ValuePair(PCS_NAD83_Ohio_South, 32123) ValuePair(PCS_NAD83_Oklahoma_North, 32124) ValuePair(PCS_NAD83_Oklahoma_South, 32125) ValuePair(PCS_NAD83_Oregon_North, 32126) ValuePair(PCS_NAD83_Oregon_South, 32127) ValuePair(PCS_NAD83_Pennsylvania_N, 32128) ValuePair(PCS_NAD83_Pennsylvania_S, 32129) ValuePair(PCS_NAD83_Rhode_Island, 32130) ValuePair(PCS_NAD83_South_Carolina, 32133) ValuePair(PCS_NAD83_South_Dakota_N, 32134) ValuePair(PCS_NAD83_South_Dakota_S, 32135) ValuePair(PCS_NAD83_Tennessee, 32136) ValuePair(PCS_NAD83_Texas_North, 32137) ValuePair(PCS_NAD83_Texas_North_Cen, 32138) ValuePair(PCS_NAD83_Texas_Central, 32139) ValuePair(PCS_NAD83_Texas_South_Cen, 32140) ValuePair(PCS_NAD83_Texas_South, 32141) ValuePair(PCS_NAD83_Utah_North, 32142) ValuePair(PCS_NAD83_Utah_Central, 32143) ValuePair(PCS_NAD83_Utah_South, 32144) ValuePair(PCS_NAD83_Vermont, 32145) ValuePair(PCS_NAD83_Virginia_North, 32146) ValuePair(PCS_NAD83_Virginia_South, 32147) ValuePair(PCS_NAD83_Washington_North, 32148) ValuePair(PCS_NAD83_Washington_South, 32149) ValuePair(PCS_NAD83_West_Virginia_N, 32150) ValuePair(PCS_NAD83_West_Virginia_S, 32151) ValuePair(PCS_NAD83_Wisconsin_North, 32152) ValuePair(PCS_NAD83_Wisconsin_Cen, 32153) ValuePair(PCS_NAD83_Wisconsin_South, 32154) ValuePair(PCS_NAD83_Wyoming_East, 32155) ValuePair(PCS_NAD83_Wyoming_E_Cen, 32156) ValuePair(PCS_NAD83_Wyoming_W_Cen, 32157) ValuePair(PCS_NAD83_Wyoming_West, 32158) ValuePair(PCS_NAD83_Puerto_Rico_Virgin_Is, 32161) ValuePair(PCS_WGS72_UTM_zone_1N, 32201) ValuePair(PCS_WGS72_UTM_zone_2N, 32202) ValuePair(PCS_WGS72_UTM_zone_3N, 32203) ValuePair(PCS_WGS72_UTM_zone_4N, 32204) ValuePair(PCS_WGS72_UTM_zone_5N, 32205) ValuePair(PCS_WGS72_UTM_zone_6N, 32206) ValuePair(PCS_WGS72_UTM_zone_7N, 32207) ValuePair(PCS_WGS72_UTM_zone_8N, 32208) ValuePair(PCS_WGS72_UTM_zone_9N, 32209) ValuePair(PCS_WGS72_UTM_zone_10N, 32210) ValuePair(PCS_WGS72_UTM_zone_11N, 32211) ValuePair(PCS_WGS72_UTM_zone_12N, 32212) ValuePair(PCS_WGS72_UTM_zone_13N, 32213) ValuePair(PCS_WGS72_UTM_zone_14N, 32214) ValuePair(PCS_WGS72_UTM_zone_15N, 32215) ValuePair(PCS_WGS72_UTM_zone_16N, 32216) ValuePair(PCS_WGS72_UTM_zone_17N, 32217) ValuePair(PCS_WGS72_UTM_zone_18N, 32218) ValuePair(PCS_WGS72_UTM_zone_19N, 32219) ValuePair(PCS_WGS72_UTM_zone_20N, 32220) ValuePair(PCS_WGS72_UTM_zone_21N, 32221) ValuePair(PCS_WGS72_UTM_zone_22N, 32222) ValuePair(PCS_WGS72_UTM_zone_23N, 32223) ValuePair(PCS_WGS72_UTM_zone_24N, 32224) ValuePair(PCS_WGS72_UTM_zone_25N, 32225) ValuePair(PCS_WGS72_UTM_zone_26N, 32226) ValuePair(PCS_WGS72_UTM_zone_27N, 32227) ValuePair(PCS_WGS72_UTM_zone_28N, 32228) ValuePair(PCS_WGS72_UTM_zone_29N, 32229) ValuePair(PCS_WGS72_UTM_zone_30N, 32230) ValuePair(PCS_WGS72_UTM_zone_31N, 32231) ValuePair(PCS_WGS72_UTM_zone_32N, 32232) ValuePair(PCS_WGS72_UTM_zone_33N, 32233) ValuePair(PCS_WGS72_UTM_zone_34N, 32234) ValuePair(PCS_WGS72_UTM_zone_35N, 32235) ValuePair(PCS_WGS72_UTM_zone_36N, 32236) ValuePair(PCS_WGS72_UTM_zone_37N, 32237) ValuePair(PCS_WGS72_UTM_zone_38N, 32238) ValuePair(PCS_WGS72_UTM_zone_39N, 32239) ValuePair(PCS_WGS72_UTM_zone_40N, 32240) ValuePair(PCS_WGS72_UTM_zone_41N, 32241) ValuePair(PCS_WGS72_UTM_zone_42N, 32242) ValuePair(PCS_WGS72_UTM_zone_43N, 32243) ValuePair(PCS_WGS72_UTM_zone_44N, 32244) ValuePair(PCS_WGS72_UTM_zone_45N, 32245) ValuePair(PCS_WGS72_UTM_zone_46N, 32246) ValuePair(PCS_WGS72_UTM_zone_47N, 32247) ValuePair(PCS_WGS72_UTM_zone_48N, 32248) ValuePair(PCS_WGS72_UTM_zone_49N, 32249) ValuePair(PCS_WGS72_UTM_zone_50N, 32250) ValuePair(PCS_WGS72_UTM_zone_51N, 32251) ValuePair(PCS_WGS72_UTM_zone_52N, 32252) ValuePair(PCS_WGS72_UTM_zone_53N, 32253) ValuePair(PCS_WGS72_UTM_zone_54N, 32254) ValuePair(PCS_WGS72_UTM_zone_55N, 32255) ValuePair(PCS_WGS72_UTM_zone_56N, 32256) ValuePair(PCS_WGS72_UTM_zone_57N, 32257) ValuePair(PCS_WGS72_UTM_zone_58N, 32258) ValuePair(PCS_WGS72_UTM_zone_59N, 32259) ValuePair(PCS_WGS72_UTM_zone_60N, 32260) ValuePair(PCS_WGS72_UTM_zone_1S, 32301) ValuePair(PCS_WGS72_UTM_zone_2S, 32302) ValuePair(PCS_WGS72_UTM_zone_3S, 32303) ValuePair(PCS_WGS72_UTM_zone_4S, 32304) ValuePair(PCS_WGS72_UTM_zone_5S, 32305) ValuePair(PCS_WGS72_UTM_zone_6S, 32306) ValuePair(PCS_WGS72_UTM_zone_7S, 32307) ValuePair(PCS_WGS72_UTM_zone_8S, 32308) ValuePair(PCS_WGS72_UTM_zone_9S, 32309) ValuePair(PCS_WGS72_UTM_zone_10S, 32310) ValuePair(PCS_WGS72_UTM_zone_11S, 32311) ValuePair(PCS_WGS72_UTM_zone_12S, 32312) ValuePair(PCS_WGS72_UTM_zone_13S, 32313) ValuePair(PCS_WGS72_UTM_zone_14S, 32314) ValuePair(PCS_WGS72_UTM_zone_15S, 32315) ValuePair(PCS_WGS72_UTM_zone_16S, 32316) ValuePair(PCS_WGS72_UTM_zone_17S, 32317) ValuePair(PCS_WGS72_UTM_zone_18S, 32318) ValuePair(PCS_WGS72_UTM_zone_19S, 32319) ValuePair(PCS_WGS72_UTM_zone_20S, 32320) ValuePair(PCS_WGS72_UTM_zone_21S, 32321) ValuePair(PCS_WGS72_UTM_zone_22S, 32322) ValuePair(PCS_WGS72_UTM_zone_23S, 32323) ValuePair(PCS_WGS72_UTM_zone_24S, 32324) ValuePair(PCS_WGS72_UTM_zone_25S, 32325) ValuePair(PCS_WGS72_UTM_zone_26S, 32326) ValuePair(PCS_WGS72_UTM_zone_27S, 32327) ValuePair(PCS_WGS72_UTM_zone_28S, 32328) ValuePair(PCS_WGS72_UTM_zone_29S, 32329) ValuePair(PCS_WGS72_UTM_zone_30S, 32330) ValuePair(PCS_WGS72_UTM_zone_31S, 32331) ValuePair(PCS_WGS72_UTM_zone_32S, 32332) ValuePair(PCS_WGS72_UTM_zone_33S, 32333) ValuePair(PCS_WGS72_UTM_zone_34S, 32334) ValuePair(PCS_WGS72_UTM_zone_35S, 32335) ValuePair(PCS_WGS72_UTM_zone_36S, 32336) ValuePair(PCS_WGS72_UTM_zone_37S, 32337) ValuePair(PCS_WGS72_UTM_zone_38S, 32338) ValuePair(PCS_WGS72_UTM_zone_39S, 32339) ValuePair(PCS_WGS72_UTM_zone_40S, 32340) ValuePair(PCS_WGS72_UTM_zone_41S, 32341) ValuePair(PCS_WGS72_UTM_zone_42S, 32342) ValuePair(PCS_WGS72_UTM_zone_43S, 32343) ValuePair(PCS_WGS72_UTM_zone_44S, 32344) ValuePair(PCS_WGS72_UTM_zone_45S, 32345) ValuePair(PCS_WGS72_UTM_zone_46S, 32346) ValuePair(PCS_WGS72_UTM_zone_47S, 32347) ValuePair(PCS_WGS72_UTM_zone_48S, 32348) ValuePair(PCS_WGS72_UTM_zone_49S, 32349) ValuePair(PCS_WGS72_UTM_zone_50S, 32350) ValuePair(PCS_WGS72_UTM_zone_51S, 32351) ValuePair(PCS_WGS72_UTM_zone_52S, 32352) ValuePair(PCS_WGS72_UTM_zone_53S, 32353) ValuePair(PCS_WGS72_UTM_zone_54S, 32354) ValuePair(PCS_WGS72_UTM_zone_55S, 32355) ValuePair(PCS_WGS72_UTM_zone_56S, 32356) ValuePair(PCS_WGS72_UTM_zone_57S, 32357) ValuePair(PCS_WGS72_UTM_zone_58S, 32358) ValuePair(PCS_WGS72_UTM_zone_59S, 32359) ValuePair(PCS_WGS72_UTM_zone_60S, 32360) ValuePair(PCS_WGS72BE_UTM_zone_1N, 32401) ValuePair(PCS_WGS72BE_UTM_zone_2N, 32402) ValuePair(PCS_WGS72BE_UTM_zone_3N, 32403) ValuePair(PCS_WGS72BE_UTM_zone_4N, 32404) ValuePair(PCS_WGS72BE_UTM_zone_5N, 32405) ValuePair(PCS_WGS72BE_UTM_zone_6N, 32406) ValuePair(PCS_WGS72BE_UTM_zone_7N, 32407) ValuePair(PCS_WGS72BE_UTM_zone_8N, 32408) ValuePair(PCS_WGS72BE_UTM_zone_9N, 32409) ValuePair(PCS_WGS72BE_UTM_zone_10N, 32410) ValuePair(PCS_WGS72BE_UTM_zone_11N, 32411) ValuePair(PCS_WGS72BE_UTM_zone_12N, 32412) ValuePair(PCS_WGS72BE_UTM_zone_13N, 32413) ValuePair(PCS_WGS72BE_UTM_zone_14N, 32414) ValuePair(PCS_WGS72BE_UTM_zone_15N, 32415) ValuePair(PCS_WGS72BE_UTM_zone_16N, 32416) ValuePair(PCS_WGS72BE_UTM_zone_17N, 32417) ValuePair(PCS_WGS72BE_UTM_zone_18N, 32418) ValuePair(PCS_WGS72BE_UTM_zone_19N, 32419) ValuePair(PCS_WGS72BE_UTM_zone_20N, 32420) ValuePair(PCS_WGS72BE_UTM_zone_21N, 32421) ValuePair(PCS_WGS72BE_UTM_zone_22N, 32422) ValuePair(PCS_WGS72BE_UTM_zone_23N, 32423) ValuePair(PCS_WGS72BE_UTM_zone_24N, 32424) ValuePair(PCS_WGS72BE_UTM_zone_25N, 32425) ValuePair(PCS_WGS72BE_UTM_zone_26N, 32426) ValuePair(PCS_WGS72BE_UTM_zone_27N, 32427) ValuePair(PCS_WGS72BE_UTM_zone_28N, 32428) ValuePair(PCS_WGS72BE_UTM_zone_29N, 32429) ValuePair(PCS_WGS72BE_UTM_zone_30N, 32430) ValuePair(PCS_WGS72BE_UTM_zone_31N, 32431) ValuePair(PCS_WGS72BE_UTM_zone_32N, 32432) ValuePair(PCS_WGS72BE_UTM_zone_33N, 32433) ValuePair(PCS_WGS72BE_UTM_zone_34N, 32434) ValuePair(PCS_WGS72BE_UTM_zone_35N, 32435) ValuePair(PCS_WGS72BE_UTM_zone_36N, 32436) ValuePair(PCS_WGS72BE_UTM_zone_37N, 32437) ValuePair(PCS_WGS72BE_UTM_zone_38N, 32438) ValuePair(PCS_WGS72BE_UTM_zone_39N, 32439) ValuePair(PCS_WGS72BE_UTM_zone_40N, 32440) ValuePair(PCS_WGS72BE_UTM_zone_41N, 32441) ValuePair(PCS_WGS72BE_UTM_zone_42N, 32442) ValuePair(PCS_WGS72BE_UTM_zone_43N, 32443) ValuePair(PCS_WGS72BE_UTM_zone_44N, 32444) ValuePair(PCS_WGS72BE_UTM_zone_45N, 32445) ValuePair(PCS_WGS72BE_UTM_zone_46N, 32446) ValuePair(PCS_WGS72BE_UTM_zone_47N, 32447) ValuePair(PCS_WGS72BE_UTM_zone_48N, 32448) ValuePair(PCS_WGS72BE_UTM_zone_49N, 32449) ValuePair(PCS_WGS72BE_UTM_zone_50N, 32450) ValuePair(PCS_WGS72BE_UTM_zone_51N, 32451) ValuePair(PCS_WGS72BE_UTM_zone_52N, 32452) ValuePair(PCS_WGS72BE_UTM_zone_53N, 32453) ValuePair(PCS_WGS72BE_UTM_zone_54N, 32454) ValuePair(PCS_WGS72BE_UTM_zone_55N, 32455) ValuePair(PCS_WGS72BE_UTM_zone_56N, 32456) ValuePair(PCS_WGS72BE_UTM_zone_57N, 32457) ValuePair(PCS_WGS72BE_UTM_zone_58N, 32458) ValuePair(PCS_WGS72BE_UTM_zone_59N, 32459) ValuePair(PCS_WGS72BE_UTM_zone_60N, 32460) ValuePair(PCS_WGS72BE_UTM_zone_1S, 32501) ValuePair(PCS_WGS72BE_UTM_zone_2S, 32502) ValuePair(PCS_WGS72BE_UTM_zone_3S, 32503) ValuePair(PCS_WGS72BE_UTM_zone_4S, 32504) ValuePair(PCS_WGS72BE_UTM_zone_5S, 32505) ValuePair(PCS_WGS72BE_UTM_zone_6S, 32506) ValuePair(PCS_WGS72BE_UTM_zone_7S, 32507) ValuePair(PCS_WGS72BE_UTM_zone_8S, 32508) ValuePair(PCS_WGS72BE_UTM_zone_9S, 32509) ValuePair(PCS_WGS72BE_UTM_zone_10S, 32510) ValuePair(PCS_WGS72BE_UTM_zone_11S, 32511) ValuePair(PCS_WGS72BE_UTM_zone_12S, 32512) ValuePair(PCS_WGS72BE_UTM_zone_13S, 32513) ValuePair(PCS_WGS72BE_UTM_zone_14S, 32514) ValuePair(PCS_WGS72BE_UTM_zone_15S, 32515) ValuePair(PCS_WGS72BE_UTM_zone_16S, 32516) ValuePair(PCS_WGS72BE_UTM_zone_17S, 32517) ValuePair(PCS_WGS72BE_UTM_zone_18S, 32518) ValuePair(PCS_WGS72BE_UTM_zone_19S, 32519) ValuePair(PCS_WGS72BE_UTM_zone_20S, 32520) ValuePair(PCS_WGS72BE_UTM_zone_21S, 32521) ValuePair(PCS_WGS72BE_UTM_zone_22S, 32522) ValuePair(PCS_WGS72BE_UTM_zone_23S, 32523) ValuePair(PCS_WGS72BE_UTM_zone_24S, 32524) ValuePair(PCS_WGS72BE_UTM_zone_25S, 32525) ValuePair(PCS_WGS72BE_UTM_zone_26S, 32526) ValuePair(PCS_WGS72BE_UTM_zone_27S, 32527) ValuePair(PCS_WGS72BE_UTM_zone_28S, 32528) ValuePair(PCS_WGS72BE_UTM_zone_29S, 32529) ValuePair(PCS_WGS72BE_UTM_zone_30S, 32530) ValuePair(PCS_WGS72BE_UTM_zone_31S, 32531) ValuePair(PCS_WGS72BE_UTM_zone_32S, 32532) ValuePair(PCS_WGS72BE_UTM_zone_33S, 32533) ValuePair(PCS_WGS72BE_UTM_zone_34S, 32534) ValuePair(PCS_WGS72BE_UTM_zone_35S, 32535) ValuePair(PCS_WGS72BE_UTM_zone_36S, 32536) ValuePair(PCS_WGS72BE_UTM_zone_37S, 32537) ValuePair(PCS_WGS72BE_UTM_zone_38S, 32538) ValuePair(PCS_WGS72BE_UTM_zone_39S, 32539) ValuePair(PCS_WGS72BE_UTM_zone_40S, 32540) ValuePair(PCS_WGS72BE_UTM_zone_41S, 32541) ValuePair(PCS_WGS72BE_UTM_zone_42S, 32542) ValuePair(PCS_WGS72BE_UTM_zone_43S, 32543) ValuePair(PCS_WGS72BE_UTM_zone_44S, 32544) ValuePair(PCS_WGS72BE_UTM_zone_45S, 32545) ValuePair(PCS_WGS72BE_UTM_zone_46S, 32546) ValuePair(PCS_WGS72BE_UTM_zone_47S, 32547) ValuePair(PCS_WGS72BE_UTM_zone_48S, 32548) ValuePair(PCS_WGS72BE_UTM_zone_49S, 32549) ValuePair(PCS_WGS72BE_UTM_zone_50S, 32550) ValuePair(PCS_WGS72BE_UTM_zone_51S, 32551) ValuePair(PCS_WGS72BE_UTM_zone_52S, 32552) ValuePair(PCS_WGS72BE_UTM_zone_53S, 32553) ValuePair(PCS_WGS72BE_UTM_zone_54S, 32554) ValuePair(PCS_WGS72BE_UTM_zone_55S, 32555) ValuePair(PCS_WGS72BE_UTM_zone_56S, 32556) ValuePair(PCS_WGS72BE_UTM_zone_57S, 32557) ValuePair(PCS_WGS72BE_UTM_zone_58S, 32558) ValuePair(PCS_WGS72BE_UTM_zone_59S, 32559) ValuePair(PCS_WGS72BE_UTM_zone_60S, 32560) ValuePair(PCS_WGS84_UTM_zone_1N, 32601) ValuePair(PCS_WGS84_UTM_zone_2N, 32602) ValuePair(PCS_WGS84_UTM_zone_3N, 32603) ValuePair(PCS_WGS84_UTM_zone_4N, 32604) ValuePair(PCS_WGS84_UTM_zone_5N, 32605) ValuePair(PCS_WGS84_UTM_zone_6N, 32606) ValuePair(PCS_WGS84_UTM_zone_7N, 32607) ValuePair(PCS_WGS84_UTM_zone_8N, 32608) ValuePair(PCS_WGS84_UTM_zone_9N, 32609) ValuePair(PCS_WGS84_UTM_zone_10N, 32610) ValuePair(PCS_WGS84_UTM_zone_11N, 32611) ValuePair(PCS_WGS84_UTM_zone_12N, 32612) ValuePair(PCS_WGS84_UTM_zone_13N, 32613) ValuePair(PCS_WGS84_UTM_zone_14N, 32614) ValuePair(PCS_WGS84_UTM_zone_15N, 32615) ValuePair(PCS_WGS84_UTM_zone_16N, 32616) ValuePair(PCS_WGS84_UTM_zone_17N, 32617) ValuePair(PCS_WGS84_UTM_zone_18N, 32618) ValuePair(PCS_WGS84_UTM_zone_19N, 32619) ValuePair(PCS_WGS84_UTM_zone_20N, 32620) ValuePair(PCS_WGS84_UTM_zone_21N, 32621) ValuePair(PCS_WGS84_UTM_zone_22N, 32622) ValuePair(PCS_WGS84_UTM_zone_23N, 32623) ValuePair(PCS_WGS84_UTM_zone_24N, 32624) ValuePair(PCS_WGS84_UTM_zone_25N, 32625) ValuePair(PCS_WGS84_UTM_zone_26N, 32626) ValuePair(PCS_WGS84_UTM_zone_27N, 32627) ValuePair(PCS_WGS84_UTM_zone_28N, 32628) ValuePair(PCS_WGS84_UTM_zone_29N, 32629) ValuePair(PCS_WGS84_UTM_zone_30N, 32630) ValuePair(PCS_WGS84_UTM_zone_31N, 32631) ValuePair(PCS_WGS84_UTM_zone_32N, 32632) ValuePair(PCS_WGS84_UTM_zone_33N, 32633) ValuePair(PCS_WGS84_UTM_zone_34N, 32634) ValuePair(PCS_WGS84_UTM_zone_35N, 32635) ValuePair(PCS_WGS84_UTM_zone_36N, 32636) ValuePair(PCS_WGS84_UTM_zone_37N, 32637) ValuePair(PCS_WGS84_UTM_zone_38N, 32638) ValuePair(PCS_WGS84_UTM_zone_39N, 32639) ValuePair(PCS_WGS84_UTM_zone_40N, 32640) ValuePair(PCS_WGS84_UTM_zone_41N, 32641) ValuePair(PCS_WGS84_UTM_zone_42N, 32642) ValuePair(PCS_WGS84_UTM_zone_43N, 32643) ValuePair(PCS_WGS84_UTM_zone_44N, 32644) ValuePair(PCS_WGS84_UTM_zone_45N, 32645) ValuePair(PCS_WGS84_UTM_zone_46N, 32646) ValuePair(PCS_WGS84_UTM_zone_47N, 32647) ValuePair(PCS_WGS84_UTM_zone_48N, 32648) ValuePair(PCS_WGS84_UTM_zone_49N, 32649) ValuePair(PCS_WGS84_UTM_zone_50N, 32650) ValuePair(PCS_WGS84_UTM_zone_51N, 32651) ValuePair(PCS_WGS84_UTM_zone_52N, 32652) ValuePair(PCS_WGS84_UTM_zone_53N, 32653) ValuePair(PCS_WGS84_UTM_zone_54N, 32654) ValuePair(PCS_WGS84_UTM_zone_55N, 32655) ValuePair(PCS_WGS84_UTM_zone_56N, 32656) ValuePair(PCS_WGS84_UTM_zone_57N, 32657) ValuePair(PCS_WGS84_UTM_zone_58N, 32658) ValuePair(PCS_WGS84_UTM_zone_59N, 32659) ValuePair(PCS_WGS84_UTM_zone_60N, 32660) ValuePair(PCS_WGS84_UTM_zone_1S, 32701) ValuePair(PCS_WGS84_UTM_zone_2S, 32702) ValuePair(PCS_WGS84_UTM_zone_3S, 32703) ValuePair(PCS_WGS84_UTM_zone_4S, 32704) ValuePair(PCS_WGS84_UTM_zone_5S, 32705) ValuePair(PCS_WGS84_UTM_zone_6S, 32706) ValuePair(PCS_WGS84_UTM_zone_7S, 32707) ValuePair(PCS_WGS84_UTM_zone_8S, 32708) ValuePair(PCS_WGS84_UTM_zone_9S, 32709) ValuePair(PCS_WGS84_UTM_zone_10S, 32710) ValuePair(PCS_WGS84_UTM_zone_11S, 32711) ValuePair(PCS_WGS84_UTM_zone_12S, 32712) ValuePair(PCS_WGS84_UTM_zone_13S, 32713) ValuePair(PCS_WGS84_UTM_zone_14S, 32714) ValuePair(PCS_WGS84_UTM_zone_15S, 32715) ValuePair(PCS_WGS84_UTM_zone_16S, 32716) ValuePair(PCS_WGS84_UTM_zone_17S, 32717) ValuePair(PCS_WGS84_UTM_zone_18S, 32718) ValuePair(PCS_WGS84_UTM_zone_19S, 32719) ValuePair(PCS_WGS84_UTM_zone_20S, 32720) ValuePair(PCS_WGS84_UTM_zone_21S, 32721) ValuePair(PCS_WGS84_UTM_zone_22S, 32722) ValuePair(PCS_WGS84_UTM_zone_23S, 32723) ValuePair(PCS_WGS84_UTM_zone_24S, 32724) ValuePair(PCS_WGS84_UTM_zone_25S, 32725) ValuePair(PCS_WGS84_UTM_zone_26S, 32726) ValuePair(PCS_WGS84_UTM_zone_27S, 32727) ValuePair(PCS_WGS84_UTM_zone_28S, 32728) ValuePair(PCS_WGS84_UTM_zone_29S, 32729) ValuePair(PCS_WGS84_UTM_zone_30S, 32730) ValuePair(PCS_WGS84_UTM_zone_31S, 32731) ValuePair(PCS_WGS84_UTM_zone_32S, 32732) ValuePair(PCS_WGS84_UTM_zone_33S, 32733) ValuePair(PCS_WGS84_UTM_zone_34S, 32734) ValuePair(PCS_WGS84_UTM_zone_35S, 32735) ValuePair(PCS_WGS84_UTM_zone_36S, 32736) ValuePair(PCS_WGS84_UTM_zone_37S, 32737) ValuePair(PCS_WGS84_UTM_zone_38S, 32738) ValuePair(PCS_WGS84_UTM_zone_39S, 32739) ValuePair(PCS_WGS84_UTM_zone_40S, 32740) ValuePair(PCS_WGS84_UTM_zone_41S, 32741) ValuePair(PCS_WGS84_UTM_zone_42S, 32742) ValuePair(PCS_WGS84_UTM_zone_43S, 32743) ValuePair(PCS_WGS84_UTM_zone_44S, 32744) ValuePair(PCS_WGS84_UTM_zone_45S, 32745) ValuePair(PCS_WGS84_UTM_zone_46S, 32746) ValuePair(PCS_WGS84_UTM_zone_47S, 32747) ValuePair(PCS_WGS84_UTM_zone_48S, 32748) ValuePair(PCS_WGS84_UTM_zone_49S, 32749) ValuePair(PCS_WGS84_UTM_zone_50S, 32750) ValuePair(PCS_WGS84_UTM_zone_51S, 32751) ValuePair(PCS_WGS84_UTM_zone_52S, 32752) ValuePair(PCS_WGS84_UTM_zone_53S, 32753) ValuePair(PCS_WGS84_UTM_zone_54S, 32754) ValuePair(PCS_WGS84_UTM_zone_55S, 32755) ValuePair(PCS_WGS84_UTM_zone_56S, 32756) ValuePair(PCS_WGS84_UTM_zone_57S, 32757) ValuePair(PCS_WGS84_UTM_zone_58S, 32758) ValuePair(PCS_WGS84_UTM_zone_59S, 32759) ValuePair(PCS_WGS84_UTM_zone_60S, 32760) /* end of list */ libgeotiff-1.7.4/libxtiff/0000775000175000017500000000000014755113373012460 500000000000000libgeotiff-1.7.4/libxtiff/CMakeLists.txt0000664000175000017500000000045414020740032015122 00000000000000############################################################################### # # CMake configuration file to build libxtiff library # # Author: Mateusz Loskot # ############################################################################### ADD_LIBRARY(xtiff STATIC xtiff.c) libgeotiff-1.7.4/libxtiff/xtiffio.h0000664000175000017500000000721014622755317014224 00000000000000/* * xtiffio.h -- Public interface to Extended GEO TIFF tags * * written by: Niles D. Ritter */ #ifndef LIBGEOTIFF_XTIFFIO_H_ #define LIBGEOTIFF_XTIFFIO_H_ #include "tiffio.h" #include "geo_config.h" /** * \file xtiffio.h * * Definitions relating GeoTIFF functions from geotiff.h to the TIFF * library (usually libtiff). */ /* * Define public Tag names and values here */ /* tags 33550 is a private tag registered to SoftDesk, Inc */ #define TIFFTAG_GEOPIXELSCALE 33550 /* tags 33920-33921 are private tags registered to Intergraph, Inc */ #define TIFFTAG_INTERGRAPH_MATRIX 33920 /* $use TIFFTAG_GEOTRANSMATRIX ! */ #define TIFFTAG_GEOTIEPOINTS 33922 /* tags 34263-34264 are private tags registered to NASA-JPL Carto Group */ #ifdef JPL_TAG_SUPPORT #define TIFFTAG_JPL_CARTO_IFD 34263 /* $use GeoProjectionInfo ! */ #endif #define TIFFTAG_GEOTRANSMATRIX 34264 /* New Matrix Tag replaces 33920 */ /* tags 34735-3438 are private tags registered to SPOT Image, Inc */ #define TIFFTAG_GEOKEYDIRECTORY 34735 #define TIFFTAG_GEODOUBLEPARAMS 34736 #define TIFFTAG_GEOASCIIPARAMS 34737 /* * Define Printing method flags. These * flags may be passed in to TIFFPrintDirectory() to * indicate that those particular field values should * be printed out in full, rather than just an indicator * of whether they are present or not. */ #define TIFFPRINT_GEOKEYDIRECTORY 0x80000000 #define TIFFPRINT_GEOKEYPARAMS 0x40000000 /********************************************************************** * Nothing below this line should need to be changed by the user. **********************************************************************/ #if defined(__cplusplus) extern "C" { #endif /********************************************************************** * Do we want to build as a DLL on windows? **********************************************************************/ #if !defined(GTIF_DLL) # if defined(_WIN32) && defined(BUILD_AS_DLL) # define GTIF_DLL __declspec(dllexport) # else # define GTIF_DLL # endif #endif extern void GTIF_DLL XTIFFInitialize(void); extern TIFF GTIF_DLL * XTIFFOpen(const char* name, const char* mode); extern TIFF GTIF_DLL * XTIFFFdOpen(int fd, const char* name, const char* mode); extern void GTIF_DLL XTIFFClose(TIFF *tif); extern TIFF GTIF_DLL * XTIFFClientOpen(const char* name, const char* mode, thandle_t thehandle, TIFFReadWriteProc, TIFFReadWriteProc, TIFFSeekProc, TIFFCloseProc, TIFFSizeProc, TIFFMapFileProc, TIFFUnmapFileProc); #if TIFFLIB_VERSION > 20220520 /* TIFFClientOpenExt() available in libtiff >= 4.5.0, which is strictly later after 20220520 */ #define HAVE_TIFFClientOpenExt #endif #ifdef HAVE_TIFFClientOpenExt extern TIFF GTIF_DLL * XTIFFOpenExt(const char* name, const char* mode, TIFFOpenOptions* opts); extern TIFF GTIF_DLL * XTIFFFdOpenExt(int fd, const char* name, const char* mode, TIFFOpenOptions* opts); extern TIFF GTIF_DLL * XTIFFClientOpenExt(const char* name, const char* mode, thandle_t thehandle, TIFFReadWriteProc, TIFFReadWriteProc, TIFFSeekProc, TIFFCloseProc, TIFFSizeProc, TIFFMapFileProc, TIFFUnmapFileProc, TIFFOpenOptions* opts); #endif #if defined(__cplusplus) } #endif #endif /* LIBGEOTIFF_XTIFFIO_H_ */ libgeotiff-1.7.4/libxtiff/Makefile.am0000664000175000017500000000032214622755317014434 00000000000000include_HEADERS = xtiffio.h if TIFF_IS_CONFIG TIFF_CFLAGS = @TIFF_INC@ -DHAVE_TIFF=1 endif AM_CFLAGS = -I../ -I$(srcdir)/.. $(TIFF_CFLAGS) libxtiff_la_SOURCES = xtiff.c noinst_LTLIBRARIES = libxtiff.la libgeotiff-1.7.4/libxtiff/Makefile.in0000664000175000017500000005226214755113347014455 00000000000000# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2018 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = libxtiff ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/m4/ax_prog_doxygen.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(include_HEADERS) \ $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/geo_config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = LTLIBRARIES = $(noinst_LTLIBRARIES) libxtiff_la_LIBADD = am_libxtiff_la_OBJECTS = xtiff.lo libxtiff_la_OBJECTS = $(am_libxtiff_la_OBJECTS) AM_V_lt = $(am__v_lt_@AM_V@) am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) am__v_lt_0 = --silent am__v_lt_1 = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__maybe_remake_depfiles = depfiles am__depfiles_remade = ./$(DEPDIR)/xtiff.Plo am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) AM_V_CC = $(am__v_CC_@AM_V@) am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) am__v_CC_0 = @echo " CC " $@; am__v_CC_1 = CCLD = $(CC) LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_CCLD = $(am__v_CCLD_@AM_V@) am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) am__v_CCLD_0 = @echo " CCLD " $@; am__v_CCLD_1 = SOURCES = $(libxtiff_la_SOURCES) DIST_SOURCES = $(libxtiff_la_SOURCES) am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(includedir)" HEADERS = $(include_HEADERS) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_DX_CURRENT_FEATURE = @DX_FLAG_DX_CURRENT_FEATURE@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ JPEG_INC = @JPEG_INC@ JPEG_PREFIX = @JPEG_PREFIX@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBGEOTIFF_MAJOR_VERSION = @LIBGEOTIFF_MAJOR_VERSION@ LIBGEOTIFF_MINOR_VERSION = @LIBGEOTIFF_MINOR_VERSION@ LIBGEOTIFF_PATCH_VERSION = @LIBGEOTIFF_PATCH_VERSION@ LIBGEOTIFF_REV_VERSION = @LIBGEOTIFF_REV_VERSION@ LIBGEOTIFF_STRING_VERSION = @LIBGEOTIFF_STRING_VERSION@ LIBGEOTIFF_VERSION = @LIBGEOTIFF_VERSION@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTIFF_CFLAGS = @LIBTIFF_CFLAGS@ LIBTIFF_LIBS = @LIBTIFF_LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ NOUNDEFINED = @NOUNDEFINED@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ PROJ_CFLAGS = @PROJ_CFLAGS@ PROJ_INCLUDE = @PROJ_INCLUDE@ PROJ_LIBS = @PROJ_LIBS@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ TIFF_INC = @TIFF_INC@ TIFF_PREFIX = @TIFF_PREFIX@ VERSION = @VERSION@ ZIP_INC = @ZIP_INC@ ZIP_PREFIX = @ZIP_PREFIX@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ include_HEADERS = xtiffio.h @TIFF_IS_CONFIG_TRUE@TIFF_CFLAGS = @TIFF_INC@ -DHAVE_TIFF=1 AM_CFLAGS = -I../ -I$(srcdir)/.. $(TIFF_CFLAGS) libxtiff_la_SOURCES = xtiff.c noinst_LTLIBRARIES = libxtiff.la all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu libxtiff/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu libxtiff/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; \ locs=`for p in $$list; do echo $$p; done | \ sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ sort -u`; \ test -z "$$locs" || { \ echo rm -f $${locs}; \ rm -f $${locs}; \ } libxtiff.la: $(libxtiff_la_OBJECTS) $(libxtiff_la_DEPENDENCIES) $(EXTRA_libxtiff_la_DEPENDENCIES) $(AM_V_CCLD)$(LINK) $(libxtiff_la_OBJECTS) $(libxtiff_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xtiff.Plo@am__quote@ # am--include-marker $(am__depfiles_remade): @$(MKDIR_P) $(@D) @echo '# dummy' >$@-t && $(am__mv) $@-t $@ am--depfiles: $(am__depfiles_remade) .c.o: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< .c.obj: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-includeHEADERS: $(include_HEADERS) @$(NORMAL_INSTALL) @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \ $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ done uninstall-includeHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir) ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-am TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-am CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-am cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LTLIBRARIES) $(HEADERS) installdirs: for dir in "$(DESTDIR)$(includedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ mostlyclean-am distclean: distclean-am -rm -f ./$(DEPDIR)/xtiff.Plo -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-includeHEADERS install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f ./$(DEPDIR)/xtiff.Plo -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-includeHEADERS .MAKE: install-am install-strip .PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \ clean-generic clean-libtool clean-noinstLTLIBRARIES \ cscopelist-am ctags ctags-am distclean distclean-compile \ distclean-generic distclean-libtool distclean-tags distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-includeHEADERS install-info install-info-am \ install-man install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ uninstall-am uninstall-includeHEADERS .PRECIOUS: Makefile # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: libgeotiff-1.7.4/libxtiff/xtiff.c0000664000175000017500000001605714622755317013700 00000000000000/* * xtiff.c * * Extended TIFF Directory GEO Tag Support. * * You may use this file as a template to add your own * extended tags to the library. Only the parts of the code * marked with "XXX" require modification. * * Author: Niles D. Ritter * * Revisions: * 18 Sep 1995 -- Deprecated Integraph Matrix tag with new one. * Backward compatible support provided. --NDR. */ #include "xtiffio.h" #include #include "cpl_serv.h" /* Tiff info structure. * * Entry format: * { TAGNUMBER, ReadCount, WriteCount, DataType, FIELDNUM, * OkToChange, PassDirCountOnSet, AsciiName } * * For ReadCount, WriteCount, -1 = unknown. */ static const TIFFFieldInfo xtiffFieldInfo[] = { /* XXX Insert Your tags here */ { TIFFTAG_GEOPIXELSCALE, -1,-1, TIFF_DOUBLE, FIELD_CUSTOM, TRUE, TRUE, "GeoPixelScale" }, { TIFFTAG_INTERGRAPH_MATRIX,-1,-1, TIFF_DOUBLE, FIELD_CUSTOM, TRUE, TRUE, "Intergraph TransformationMatrix" }, { TIFFTAG_GEOTRANSMATRIX, -1,-1, TIFF_DOUBLE, FIELD_CUSTOM, TRUE, TRUE, "GeoTransformationMatrix" }, { TIFFTAG_GEOTIEPOINTS, -1,-1, TIFF_DOUBLE, FIELD_CUSTOM, TRUE, TRUE, "GeoTiePoints" }, { TIFFTAG_GEOKEYDIRECTORY,-1,-1, TIFF_SHORT, FIELD_CUSTOM, TRUE, TRUE, "GeoKeyDirectory" }, { TIFFTAG_GEODOUBLEPARAMS, -1,-1, TIFF_DOUBLE, FIELD_CUSTOM, TRUE, TRUE, "GeoDoubleParams" }, { TIFFTAG_GEOASCIIPARAMS, -1,-1, TIFF_ASCII, FIELD_CUSTOM, TRUE, FALSE, "GeoASCIIParams" }, #ifdef JPL_TAG_SUPPORT { TIFFTAG_JPL_CARTO_IFD, 1, 1, TIFF_LONG, FIELD_CUSTOM, TRUE, TRUE, "JPL Carto IFD offset" }, /** Don't use this! **/ #endif }; #define N(a) (sizeof (a) / sizeof (a[0])) static void _XTIFFLocalDefaultDirectory(TIFF *tif) { /* Install the extended Tag field info */ TIFFMergeFieldInfo(tif, xtiffFieldInfo, N(xtiffFieldInfo)); } /********************************************************************** * Nothing below this line should need to be changed. **********************************************************************/ static TIFFExtendProc _ParentExtender; /* * This is the callback procedure, and is * called by the DefaultDirectory method * every time a new TIFF directory is opened. */ static void _XTIFFDefaultDirectory(TIFF *tif) { /* set up our own defaults */ _XTIFFLocalDefaultDirectory(tif); /* Since an XTIFF client module may have overridden * the default directory method, we call it now to * allow it to set up the rest of its own methods. */ if (_ParentExtender) (*_ParentExtender)(tif); } /** Registers an extension with libtiff for adding GeoTIFF tags. After this one-time intialization, any TIFF open function may be called in the usual manner to create a TIFF file that compatible with libgeotiff. The XTIFF open functions are simply for convenience: they call this and then pass their parameters on to the appropriate TIFF open function.

This function may be called any number of times safely, since it will only register the extension the first time it is called. **/ void XTIFFInitialize(void) { static int first_time=1; if (! first_time) return; /* Been there. Done that. */ first_time = 0; /* Grab the inherited method and install */ _ParentExtender = TIFFSetTagExtender(_XTIFFDefaultDirectory); } /** * GeoTIFF compatible TIFF file open function. * * @param name The filename of a TIFF file to open. * @param mode The open mode ("r", "w" or "a"). * * @return a TIFF * for the file, or NULL if the open failed. * This function is used to open GeoTIFF files instead of TIFFOpen() from libtiff. Internally it calls TIFFOpen(), but sets up some extra hooks so that GeoTIFF tags can be extracted from the file. If XTIFFOpen() isn't used, GTIFNew() won't work properly. Files opened with XTIFFOpen() should be closed with XTIFFClose(). The name of the file to be opened should be passed as name, and an opening mode ("r", "w" or "a") acceptable to TIFFOpen() should be passed as the mode.

If XTIFFOpen() fails it will return NULL. Otherwise, normal TIFFOpen() error reporting steps will have already taken place.

*/ TIFF* XTIFFOpen(const char* name, const char* mode) { TIFF *tif; /* Set up the callback */ XTIFFInitialize(); /* Open the file; the callback will set everything up */ tif = TIFFOpen(name, mode); if (!tif) return tif; return tif; } TIFF* XTIFFFdOpen(int fd, const char* name, const char* mode) { TIFF *tif; /* Set up the callback */ XTIFFInitialize(); /* Open the file; the callback will set everything up */ tif = TIFFFdOpen(fd, name, mode); if (!tif) return tif; return tif; } TIFF* XTIFFClientOpen(const char* name, const char* mode, thandle_t thehandle, TIFFReadWriteProc RWProc, TIFFReadWriteProc RWProc2, TIFFSeekProc SProc, TIFFCloseProc CProc, TIFFSizeProc SzProc, TIFFMapFileProc MFProvc, TIFFUnmapFileProc UMFProc ) { TIFF *tif; /* Set up the callback */ XTIFFInitialize(); /* Open the file; the callback will set everything up */ tif = TIFFClientOpen(name, mode, thehandle, RWProc, RWProc2, SProc, CProc, SzProc, MFProvc, UMFProc); if (!tif) return tif; return tif; } #ifdef HAVE_TIFFClientOpenExt TIFF* XTIFFOpenExt(const char* name, const char* mode, TIFFOpenOptions* opts) { TIFF *tif; /* Set up the callback */ XTIFFInitialize(); /* Open the file; the callback will set everything up */ tif = TIFFOpenExt(name, mode, opts); if (!tif) return tif; return tif; } TIFF* XTIFFFdOpenExt(int fd, const char* name, const char* mode, TIFFOpenOptions* opts) { TIFF *tif; /* Set up the callback */ XTIFFInitialize(); /* Open the file; the callback will set everything up */ tif = TIFFFdOpenExt(fd, name, mode, opts); if (!tif) return tif; return tif; } TIFF* XTIFFClientOpenExt(const char* name, const char* mode, thandle_t thehandle, TIFFReadWriteProc RWProc, TIFFReadWriteProc RWProc2, TIFFSeekProc SProc, TIFFCloseProc CProc, TIFFSizeProc SzProc, TIFFMapFileProc MFProvc, TIFFUnmapFileProc UMFProc, TIFFOpenOptions* opts) { TIFF *tif; /* Set up the callback */ XTIFFInitialize(); /* Open the file; the callback will set everything up */ tif = TIFFClientOpenExt(name, mode, thehandle, RWProc, RWProc2, SProc, CProc, SzProc, MFProvc, UMFProc, opts); if (!tif) return tif; return tif; } #endif /** * Close a file opened with XTIFFOpen(). * * @param tif The file handle returned by XTIFFOpen(). * * If a GTIF structure was created with GTIFNew() * for this file, it should be freed with GTIFFree() * before calling XTIFFClose(). */ void XTIFFClose(TIFF *tif) { TIFFClose(tif); } libgeotiff-1.7.4/README_BIN0000664000175000017500000000223714020740032012124 00000000000000 libgeotiff Binary Distribution for Unix --------------------------------------- This tree contains a binary distribution of libgeotiff, and related utilities (listgeo, and geotifcp) for a Unix platform (as indicated in the distribution filename). The distribution should consist of: README: this file bin/listgeo: utility program bin/geotifcp: utility program lib/libgeotiff.a: static library for libgeotiff, applications also have to link against libtiff. lib/libgeotiff-$VERSION.so: Shared library version of the above. lib/libgeotiff.so: link to the specific shared library. include: The include files for libgeotiff. This distribution is intended to be suitable to untar directly under /usr/local or /usr to give a rough equivelent to having done a "make install" from the libgeotiff source, though this README should be removed. User documentation for listgeo and geotifcp can be found at: http://www.remotesensing.org/geotiff/listgeo.html http://www.remotesensing.org/geotiff/geotifcp.html General information on libgeotiff, and GeoTIFF can be found at: http://www.remotesensing.org/geotiff/geotiff.html or http://www.geotiff.org/ libgeotiff-1.7.4/geotiff_proj4.c0000664000175000017500000015013114741036557013502 00000000000000/****************************************************************************** * * Project: libgeotiff * Purpose: Code to convert a normalized GeoTIFF definition into a PROJ.4 * (OGDI) compatible projection string. * Author: Frank Warmerdam, warmerdam@pobox.com * ****************************************************************************** * Copyright (c) 1999, Frank Warmerdam * * SPDX-License-Identifier: MIT ****************************************************************************** */ #include #include #include #include "cpl_serv.h" #include "geotiff.h" #include "geo_normalize.h" #include "geovalues.h" #include "geo_tiffp.h" #include "proj.h" /************************************************************************/ /* GTIFProj4AppendEllipsoid() */ /************************************************************************/ static void GTIFProj4AppendEllipsoid(GTIFDefn* psDefn, char* pszProjection) { /* ==================================================================== */ /* Handle ellipsoid information. */ /* ==================================================================== */ if( psDefn->Ellipsoid == Ellipse_WGS_84 ) strcat( pszProjection, "+ellps=WGS84 " ); else if( psDefn->Ellipsoid == Ellipse_Clarke_1866 ) strcat( pszProjection, "+ellps=clrk66 " ); else if( psDefn->Ellipsoid == Ellipse_Clarke_1880 ) strcat( pszProjection, "+ellps=clrk80 " ); else if( psDefn->Ellipsoid == Ellipse_GRS_1980 ) strcat( pszProjection, "+ellps=GRS80 " ); else { if( psDefn->SemiMajor != 0.0 && psDefn->SemiMinor != 0.0 ) { sprintf( pszProjection+strlen(pszProjection), "+a=%.3f +b=%.3f ", psDefn->SemiMajor, psDefn->SemiMinor ); } } } /************************************************************************/ /* OSRProj4Tokenize() */ /* */ /* Custom tokenizing function for PROJ.4 strings. The main */ /* reason we can't just use CSLTokenizeString is to handle */ /* strings with a + sign in the exponents of parameter values. */ /************************************************************************/ static char **OSRProj4Tokenize( const char *pszFull ) { static const int nMaxTokens = 200; if( pszFull == NULL ) return NULL; char **papszTokens = (char **) calloc(nMaxTokens, sizeof(char*)); char *pszFullWrk = CPLStrdup(pszFull); int nTokens = 0; char *pszStart = NULL; for( int i=0; pszFullWrk[i] != '\0' && nTokens != nMaxTokens-1; i++ ) { switch( pszFullWrk[i] ) { case '+': if( i == 0 || pszFullWrk[i-1] == '\0' ) { if( pszStart != NULL ) { if( strstr(pszStart,"=") != NULL ) { papszTokens[nTokens++] = CPLStrdup(pszStart); } else { char szAsBoolean[100]; strncpy( szAsBoolean,pszStart, sizeof(szAsBoolean)-1-4); szAsBoolean[sizeof(szAsBoolean)-1-4] = '\0'; strcat( szAsBoolean,"=yes" ); papszTokens[nTokens++] = CPLStrdup(szAsBoolean); } } pszStart = pszFullWrk + i + 1; } break; case ' ': case '\t': case '\n': pszFullWrk[i] = '\0'; break; default: break; } } if( pszStart != NULL && strlen(pszStart) > 0 ) { if (nTokens != 199) papszTokens[nTokens++] = CPLStrdup(pszStart); } CPLFree( pszFullWrk ); return papszTokens; } /************************************************************************/ /* OSR_GSV() */ /************************************************************************/ static const char *OSR_GSV( char **papszNV, const char * pszField ) { if( !papszNV ) return NULL; const size_t field_len = strlen(pszField); for( int i = 0; papszNV[i] != NULL; i++ ) { if( EQUALN(papszNV[i],pszField,field_len) ) { if( papszNV[i][field_len] == '=' ) return papszNV[i] + field_len + 1; if( strlen(papszNV[i]) == field_len ) return ""; } } return NULL; } /************************************************************************/ /* OSR_GDV() */ /* */ /* Fetch a particular parameter out of the parameter list, or */ /* the indicated default if it isn't available. This is a */ /* helper function for importFromProj4(). */ /************************************************************************/ static double OSR_GDV( char **papszNV, const char * pszField, double dfDefaultValue ) { const char *pszValue = OSR_GSV( papszNV, pszField ); /* special hack to use k_0 if available. */ if( pszValue == NULL && EQUAL(pszField,"k") ) return OSR_GDV( papszNV, "k_0", dfDefaultValue ); if( pszValue == NULL ) return dfDefaultValue; else return GTIFAtof(pszValue); } /************************************************************************/ /* OSRFreeStringList() */ /************************************************************************/ static void OSRFreeStringList( char ** list ) { for( int i = 0; list != NULL && list[i] != NULL; i++ ) free( list[i] ); free(list); } /************************************************************************/ /* GTIFSetFromProj4() */ /************************************************************************/ int GTIFSetFromProj4( GTIF *gtif, const char *proj4 ) { char **papszNV = OSRProj4Tokenize( proj4 ); short nSpheroid = KvUserDefined; double dfSemiMajor=0.0, dfSemiMinor=0.0, dfInvFlattening=0.0; /* -------------------------------------------------------------------- */ /* Get the ellipsoid definition. */ /* -------------------------------------------------------------------- */ const char *value = OSR_GSV( papszNV, "ellps" ); if( value == NULL ) { /* nothing */; } else if( EQUAL(value,"WGS84") ) nSpheroid = Ellipse_WGS_84; else if( EQUAL(value,"clrk66") ) nSpheroid = Ellipse_Clarke_1866; else if( EQUAL(value,"clrk80") ) nSpheroid = Ellipse_Clarke_1880; else if( EQUAL(value,"GRS80") ) nSpheroid = Ellipse_GRS_1980; if( nSpheroid == KvUserDefined ) { dfSemiMajor = OSR_GDV(papszNV,"a",0.0); dfSemiMinor = OSR_GDV(papszNV,"b",0.0); dfInvFlattening = OSR_GDV(papszNV,"rf",0.0); if( dfSemiMajor != 0.0 && dfSemiMinor != 0.0 && dfInvFlattening == 0.0 ) dfInvFlattening = -1.0 / (dfSemiMinor/dfSemiMajor - 1.0); } /* -------------------------------------------------------------------- */ /* Get the GCS/Datum code. */ /* -------------------------------------------------------------------- */ value = OSR_GSV( papszNV, "datum" ); int nDatum = KvUserDefined; int nGCS = KvUserDefined; if( value == NULL ) { } else if( EQUAL(value,"WGS84") ) { nGCS = GCS_WGS_84; nDatum = Datum_WGS84; } else if( EQUAL(value,"NAD83") ) { nGCS = GCS_NAD83; nDatum = Datum_North_American_Datum_1983; } else if( EQUAL(value,"NAD27") ) { nGCS = GCS_NAD27; nDatum = Datum_North_American_Datum_1927; } /* -------------------------------------------------------------------- */ /* Operate on the basis of the projection name. */ /* -------------------------------------------------------------------- */ value = OSR_GSV(papszNV,"proj"); if( value == NULL ) { OSRFreeStringList( papszNV ); return FALSE; } else if( EQUAL(value,"longlat") || EQUAL(value,"latlong") ) { } else if( EQUAL(value,"tmerc") ) { GTIFKeySet(gtif, GTModelTypeGeoKey, TYPE_SHORT, 1, ModelTypeProjected); GTIFKeySet(gtif, ProjectedCSTypeGeoKey, TYPE_SHORT, 1, KvUserDefined ); GTIFKeySet(gtif, ProjectionGeoKey, TYPE_SHORT, 1, KvUserDefined ); GTIFKeySet(gtif, ProjCoordTransGeoKey, TYPE_SHORT, 1, CT_TransverseMercator ); GTIFKeySet(gtif, ProjNatOriginLatGeoKey, TYPE_DOUBLE, 1, OSR_GDV( papszNV, "lat_0", 0.0 ) ); GTIFKeySet(gtif, ProjNatOriginLongGeoKey, TYPE_DOUBLE, 1, OSR_GDV( papszNV, "lon_0", 0.0 ) ); GTIFKeySet(gtif, ProjScaleAtNatOriginGeoKey, TYPE_DOUBLE, 1, OSR_GDV( papszNV, "k", 1.0 ) ); GTIFKeySet(gtif, ProjFalseEastingGeoKey, TYPE_DOUBLE, 1, OSR_GDV( papszNV, "x_0", 0.0 ) ); GTIFKeySet(gtif, ProjFalseNorthingGeoKey, TYPE_DOUBLE, 1, OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"utm") ) { int nZone = (int) OSR_GDV(papszNV,"zone",0); const char *south = OSR_GSV(papszNV,"south"); GTIFKeySet(gtif, GTModelTypeGeoKey, TYPE_SHORT, 1, ModelTypeProjected); GTIFKeySet(gtif, ProjectedCSTypeGeoKey, TYPE_SHORT, 1, KvUserDefined ); GTIFKeySet(gtif, ProjectionGeoKey, TYPE_SHORT, 1, KvUserDefined ); GTIFKeySet(gtif, ProjCoordTransGeoKey, TYPE_SHORT, 1, CT_TransverseMercator ); GTIFKeySet(gtif, ProjNatOriginLatGeoKey, TYPE_DOUBLE, 1, 0.0 ); GTIFKeySet(gtif, ProjNatOriginLongGeoKey, TYPE_DOUBLE, 1, nZone * 6 - 183.0 ); GTIFKeySet(gtif, ProjScaleAtNatOriginGeoKey, TYPE_DOUBLE, 1, 0.9996 ); GTIFKeySet(gtif, ProjFalseEastingGeoKey, TYPE_DOUBLE, 1, 500000.0 ); if( south != NULL ) GTIFKeySet(gtif, ProjFalseNorthingGeoKey, TYPE_DOUBLE, 1, 10000000.0 ); else GTIFKeySet(gtif, ProjFalseNorthingGeoKey, TYPE_DOUBLE, 1, 0.0 ); } else if( EQUAL(value,"lcc") && OSR_GDV(papszNV, "lat_0", 0.0 ) == OSR_GDV(papszNV, "lat_1", 0.0 ) ) { GTIFKeySet(gtif, GTModelTypeGeoKey, TYPE_SHORT, 1, ModelTypeProjected); GTIFKeySet(gtif, ProjectedCSTypeGeoKey, TYPE_SHORT, 1, KvUserDefined ); GTIFKeySet(gtif, ProjectionGeoKey, TYPE_SHORT, 1, KvUserDefined ); GTIFKeySet(gtif, ProjCoordTransGeoKey, TYPE_SHORT, 1, CT_LambertConfConic_1SP ); GTIFKeySet(gtif, ProjNatOriginLatGeoKey, TYPE_DOUBLE, 1, OSR_GDV( papszNV, "lat_0", 0.0 ) ); GTIFKeySet(gtif, ProjNatOriginLongGeoKey, TYPE_DOUBLE, 1, OSR_GDV( papszNV, "lon_0", 0.0 ) ); GTIFKeySet(gtif, ProjScaleAtNatOriginGeoKey, TYPE_DOUBLE, 1, OSR_GDV( papszNV, "k", 1.0 ) ); GTIFKeySet(gtif, ProjFalseEastingGeoKey, TYPE_DOUBLE, 1, OSR_GDV( papszNV, "x_0", 0.0 ) ); GTIFKeySet(gtif, ProjFalseNorthingGeoKey, TYPE_DOUBLE, 1, OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"lcc") ) { GTIFKeySet(gtif, GTModelTypeGeoKey, TYPE_SHORT, 1, ModelTypeProjected); GTIFKeySet(gtif, ProjectedCSTypeGeoKey, TYPE_SHORT, 1, KvUserDefined ); GTIFKeySet(gtif, ProjectionGeoKey, TYPE_SHORT, 1, KvUserDefined ); GTIFKeySet(gtif, ProjCoordTransGeoKey, TYPE_SHORT, 1, CT_LambertConfConic_2SP ); GTIFKeySet(gtif, ProjFalseOriginLatGeoKey, TYPE_DOUBLE, 1, OSR_GDV( papszNV, "lat_0", 0.0 ) ); GTIFKeySet(gtif, ProjFalseOriginLongGeoKey, TYPE_DOUBLE, 1, OSR_GDV( papszNV, "lon_0", 0.0 ) ); GTIFKeySet(gtif, ProjStdParallel1GeoKey, TYPE_DOUBLE, 1, OSR_GDV( papszNV, "lat_1", 0.0 ) ); GTIFKeySet(gtif, ProjStdParallel2GeoKey, TYPE_DOUBLE, 1, OSR_GDV( papszNV, "lat_2", 0.0 ) ); GTIFKeySet(gtif, ProjFalseOriginEastingGeoKey, TYPE_DOUBLE, 1, OSR_GDV( papszNV, "x_0", 0.0 ) ); GTIFKeySet(gtif, ProjFalseOriginNorthingGeoKey, TYPE_DOUBLE, 1, OSR_GDV( papszNV, "y_0", 0.0 ) ); } #ifdef notdef else if( EQUAL(value,"bonne") ) { SetBonne( OSR_GDV( papszNV, "lat_1", 0.0 ), OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"cass") ) { SetCS( OSR_GDV( papszNV, "lat_0", 0.0 ), OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"nzmg") ) { SetNZMG( OSR_GDV( papszNV, "lat_0", -41.0 ), OSR_GDV( papszNV, "lon_0", 173.0 ), OSR_GDV( papszNV, "x_0", 2510000.0 ), OSR_GDV( papszNV, "y_0", 6023150.0 ) ); } else if( EQUAL(value,"cea") ) { SetCEA( OSR_GDV( papszNV, "lat_ts", 0.0 ), OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"merc") /* 2SP form */ && OSR_GDV(papszNV, "lat_ts", 1000.0) < 999.0 ) { SetMercator2SP( OSR_GDV( papszNV, "lat_ts", 0.0 ), 0.0, OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"merc") ) /* 1SP form */ { SetMercator( 0.0, OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "k", 1.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"stere") && ABS(OSR_GDV( papszNV, "lat_0", 0.0 ) - 90) < 0.001 ) { SetPS( OSR_GDV( papszNV, "lat_ts", 90.0 ), OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "k", 1.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"stere") && ABS(OSR_GDV( papszNV, "lat_0", 0.0 ) + 90) < 0.001 ) { SetPS( OSR_GDV( papszNV, "lat_ts", -90.0 ), OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "k", 1.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUALN(value,"stere",5) /* mostly sterea */ && CSLFetchNameValue(papszNV,"k") != NULL ) { SetOS( OSR_GDV( papszNV, "lat_0", 0.0 ), OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "k", 1.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"stere") ) { SetStereographic( OSR_GDV( papszNV, "lat_0", 0.0 ), OSR_GDV( papszNV, "lon_0", 0.0 ), 1.0, OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"eqc") ) { if( OSR_GDV( papszNV, "lat_0", 0.0 ) != OSR_GDV( papszNV, "lat_ts", 0.0 ) ) SetEquirectangular2( OSR_GDV( papszNV, "lat_0", 0.0 ), OSR_GDV( papszNV, "lon_0", 0.0 )+dfFromGreenwich, OSR_GDV( papszNV, "lat_ts", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); else SetEquirectangular( OSR_GDV( papszNV, "lat_ts", 0.0 ), OSR_GDV( papszNV, "lon_0", 0.0 )+dfFromGreenwich, OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"glabsgm") ) { SetGaussLabordeReunion( OSR_GDV( papszNV, "lat_0", -21.116666667 ), OSR_GDV( papszNV, "lon_0", 55.53333333309)+dfFromGreenwich, OSR_GDV( papszNV, "k_0", 1.0 ), OSR_GDV( papszNV, "x_0", 160000.000 ), OSR_GDV( papszNV, "y_0", 50000.000 ) ); } else if( EQUAL(value,"gnom") ) { SetGnomonic( OSR_GDV( papszNV, "lat_0", 0.0 ), OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"ortho") ) { SetOrthographic( OSR_GDV( papszNV, "lat_0", 0.0 ), OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"laea") ) { SetLAEA( OSR_GDV( papszNV, "lat_0", 0.0 ), OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"aeqd") ) { SetAE( OSR_GDV( papszNV, "lat_0", 0.0 ), OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"eqdc") ) { SetEC( OSR_GDV( papszNV, "lat_1", 0.0 ), OSR_GDV( papszNV, "lat_2", 0.0 ), OSR_GDV( papszNV, "lat_0", 0.0 ), OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"mill") ) { SetMC( OSR_GDV( papszNV, "lat_0", 0.0 ), OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"moll") ) { SetMollweide( OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"eck4") ) { SetEckertIV( OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"eck6") ) { SetEckertVI( OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"poly") ) { SetPolyconic( OSR_GDV( papszNV, "lat_0", 0.0 ), OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"aea") ) { SetACEA( OSR_GDV( papszNV, "lat_1", 0.0 ), OSR_GDV( papszNV, "lat_2", 0.0 ), OSR_GDV( papszNV, "lat_0", 0.0 ), OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"robin") ) { SetRobinson( OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"vandg") ) { SetVDG( OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"sinu") ) { SetSinusoidal( OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"gall") ) { SetGS( OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"goode") ) { SetGH( OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"geos") ) { SetGEOS( OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "h", 35785831.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"lcc") ) { if( OSR_GDV(papszNV, "lat_0", 0.0 ) == OSR_GDV(papszNV, "lat_1", 0.0 ) ) { /* 1SP form */ SetLCC1SP( OSR_GDV( papszNV, "lat_0", 0.0 ), OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "k_0", 1.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else { /* 2SP form */ SetLCC( OSR_GDV( papszNV, "lat_1", 0.0 ), OSR_GDV( papszNV, "lat_2", 0.0 ), OSR_GDV( papszNV, "lat_0", 0.0 ), OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } } else if( EQUAL(value,"omerc") ) { SetHOM( OSR_GDV( papszNV, "lat_0", 0.0 ), OSR_GDV( papszNV, "lonc", 0.0 ), OSR_GDV( papszNV, "alpha", 0.0 ), 0.0, /* ??? */ OSR_GDV( papszNV, "k", 1.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"somerc") ) { SetHOM( OSR_GDV( papszNV, "lat_0", 0.0 ), OSR_GDV( papszNV, "lon_0", 0.0 ), 90.0, 90.0, OSR_GDV( papszNV, "k", 1.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"krovak") ) { SetKrovak( OSR_GDV( papszNV, "lat_0", 0.0 ), OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "alpha", 0.0 ), 0.0, /* pseudo_standard_parallel_1 */ OSR_GDV( papszNV, "k", 1.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value, "iwm_p") ) { SetIWMPolyconic( OSR_GDV( papszNV, "lat_1", 0.0 ), OSR_GDV( papszNV, "lat_2", 0.0 ), OSR_GDV( papszNV, "lon_0", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value, "wag1") ) { SetWagner( 1, 0.0, OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value, "wag2") ) { SetWagner( 2, 0.0, OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value, "wag3") ) { SetWagner( 3, OSR_GDV( papszNV, "lat_ts", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value, "wag1") ) { SetWagner( 4, 0.0, OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value, "wag1") ) { SetWagner( 5, 0.0, OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value, "wag1") ) { SetWagner( 6, 0.0, OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value, "wag1") ) { SetWagner( 7, 0.0, OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } else if( EQUAL(value,"tpeqd") ) { SetTPED( OSR_GDV( papszNV, "lat_1", 0.0 ), OSR_GDV( papszNV, "lon_1", 0.0 ), OSR_GDV( papszNV, "lat_2", 0.0 ), OSR_GDV( papszNV, "lon_2", 0.0 ), OSR_GDV( papszNV, "x_0", 0.0 ), OSR_GDV( papszNV, "y_0", 0.0 ) ); } #endif else { /* unsupported coordinate system */ OSRFreeStringList( papszNV ); return FALSE; } /* -------------------------------------------------------------------- */ /* Write the GCS if we have it, otherwise write the datum. */ /* -------------------------------------------------------------------- */ if( nGCS != KvUserDefined ) { GTIFKeySet( gtif, GeographicTypeGeoKey, TYPE_SHORT, 1, nGCS ); } else { GTIFKeySet( gtif, GeographicTypeGeoKey, TYPE_SHORT, 1, KvUserDefined ); GTIFKeySet( gtif, GeogGeodeticDatumGeoKey, TYPE_SHORT, 1, nDatum ); } /* -------------------------------------------------------------------- */ /* Write the ellipsoid if we don't know the GCS. */ /* -------------------------------------------------------------------- */ if( nGCS == KvUserDefined ) { if( nSpheroid != KvUserDefined ) GTIFKeySet( gtif, GeogEllipsoidGeoKey, TYPE_SHORT, 1, nSpheroid ); else { GTIFKeySet( gtif, GeogEllipsoidGeoKey, TYPE_SHORT, 1, KvUserDefined ); GTIFKeySet( gtif, GeogSemiMajorAxisGeoKey, TYPE_DOUBLE, 1, dfSemiMajor ); if( dfInvFlattening == 0.0 ) GTIFKeySet( gtif, GeogSemiMinorAxisGeoKey, TYPE_DOUBLE, 1, dfSemiMajor ); else GTIFKeySet( gtif, GeogInvFlatteningGeoKey, TYPE_DOUBLE, 1, dfInvFlattening ); } } /* -------------------------------------------------------------------- */ /* Linear units translation */ /* -------------------------------------------------------------------- */ value = OSR_GSV( papszNV, "units" ); if( value == NULL ) { value = OSR_GSV( papszNV, "to_meter" ); if( value ) { GTIFKeySet( gtif, ProjLinearUnitsGeoKey, TYPE_SHORT, 1, KvUserDefined ); GTIFKeySet( gtif, ProjLinearUnitSizeGeoKey, TYPE_DOUBLE, 1, GTIFAtof(value) ); } } else if( EQUAL(value,"meter") || EQUAL(value,"m") ) { GTIFKeySet( gtif, ProjLinearUnitsGeoKey, TYPE_SHORT, 1, Linear_Meter ); } else if( EQUAL(value,"us-ft") ) { GTIFKeySet( gtif, ProjLinearUnitsGeoKey, TYPE_SHORT, 1, Linear_Foot_US_Survey ); } else if( EQUAL(value,"ft") ) { GTIFKeySet( gtif, ProjLinearUnitsGeoKey, TYPE_SHORT, 1, Linear_Foot ); } OSRFreeStringList( papszNV ); return TRUE; } /************************************************************************/ /* GTIFGetProj4Defn() */ /************************************************************************/ char * GTIFGetProj4Defn( GTIFDefn * psDefn ) { char szUnits[64]; if( psDefn == NULL || !psDefn->DefnSet ) return CPLStrdup(""); /* ==================================================================== */ /* Translate the units of measure. */ /* */ /* Note that even with a +units, or +to_meter in effect, it is */ /* still assumed that all the projection parameters are in */ /* meters. */ /* ==================================================================== */ if( psDefn->UOMLength == Linear_Meter ) { strcpy( szUnits, "+units=m " ); } else if( psDefn->UOMLength == Linear_Foot ) { strcpy( szUnits, "+units=ft " ); } else if( psDefn->UOMLength == Linear_Foot_US_Survey ) { strcpy( szUnits, "+units=us-ft " ); } else if( psDefn->UOMLength == Linear_Foot_Indian ) { strcpy( szUnits, "+units=ind-ft " ); } else if( psDefn->UOMLength == Linear_Link ) { strcpy( szUnits, "+units=link " ); } else if( psDefn->UOMLength == Linear_Yard_Indian) { strcpy( szUnits, "+units=ind-yd " ); } else if( psDefn->UOMLength == Linear_Fathom ) { strcpy( szUnits, "+units=fath " ); } else if( psDefn->UOMLength == Linear_Mile_International_Nautical ) { strcpy( szUnits, "+units=kmi " ); } else { sprintf( szUnits, "+to_meter=%.10f", psDefn->UOMLengthInMeters ); } /* -------------------------------------------------------------------- */ /* false easting and northing are in meters and that is what */ /* PROJ.4 wants regardless of the linear units. */ /* -------------------------------------------------------------------- */ const double dfFalseEasting = psDefn->ProjParm[5]; const double dfFalseNorthing = psDefn->ProjParm[6]; /* ==================================================================== */ /* Handle general projection methods. */ /* ==================================================================== */ /* -------------------------------------------------------------------- */ /* Geographic. */ /* -------------------------------------------------------------------- */ char szProjection[512]; szProjection[0] = '\0'; if(psDefn->Model==ModelTypeGeographic) { sprintf(szProjection+strlen(szProjection),"+proj=latlong "); } /* -------------------------------------------------------------------- */ /* UTM - special case override on transverse mercator so things */ /* will be more meaningful to the user. */ /* -------------------------------------------------------------------- */ else if( psDefn->MapSys == MapSys_UTM_North ) { sprintf( szProjection+strlen(szProjection), "+proj=utm +zone=%d ", psDefn->Zone ); } /* -------------------------------------------------------------------- */ /* Transverse Mercator */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_TransverseMercator ) { sprintf( szProjection+strlen(szProjection), "+proj=tmerc +lat_0=%.9f +lon_0=%.9f +k=%f +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[1], psDefn->ProjParm[4], dfFalseEasting, dfFalseNorthing ); } /* -------------------------------------------------------------------- */ /* Oblique Mercator */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_ObliqueMercator_Laborde ) { sprintf( szProjection+strlen(szProjection), "+proj=labrd +lat_0=%.9f +lon_0=%.9f +azi=%.9f +k=%f +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[1], psDefn->ProjParm[2], psDefn->ProjParm[4], dfFalseEasting, dfFalseNorthing ); } /* -------------------------------------------------------------------- */ /* Mercator */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_Mercator ) { if( psDefn->ProjParm[2] != 0.0 ) /* Mercator 2SP: FIXME we need a better way of detecting it */ sprintf( szProjection+strlen(szProjection), "+proj=merc +lat_ts=%.9f +lon_0=%.9f +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[2], psDefn->ProjParm[1], dfFalseEasting, dfFalseNorthing ); else sprintf( szProjection+strlen(szProjection), "+proj=merc +lat_ts=%.9f +lon_0=%.9f +k=%f +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[1], psDefn->ProjParm[4], dfFalseEasting, dfFalseNorthing ); } /* -------------------------------------------------------------------- */ /* Cassini/Soldner */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_CassiniSoldner ) { sprintf( szProjection+strlen(szProjection), "+proj=cass +lat_0=%.9f +lon_0=%.9f +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[1], dfFalseEasting, dfFalseNorthing ); } /* -------------------------------------------------------------------- */ /* Oblique Stereographic - Should this really map onto */ /* Stereographic? */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_ObliqueStereographic ) { sprintf( szProjection+strlen(szProjection), "+proj=stere +lat_0=%.9f +lon_0=%.9f +k=%f +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[1], psDefn->ProjParm[4], dfFalseEasting, dfFalseNorthing ); } /* -------------------------------------------------------------------- */ /* Stereographic */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_Stereographic ) { sprintf( szProjection+strlen(szProjection), "+proj=stere +lat_0=%.9f +lon_0=%.9f +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[1], dfFalseEasting, dfFalseNorthing ); } /* -------------------------------------------------------------------- */ /* Polar Stereographic */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_PolarStereographic ) { if( psDefn->ProjParm[0] > 0.0 ) sprintf( szProjection+strlen(szProjection), "+proj=stere +lat_0=90 +lat_ts=%.9f +lon_0=%.9f " "+k=%.9f +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[1], psDefn->ProjParm[4], dfFalseEasting, dfFalseNorthing ); else sprintf( szProjection+strlen(szProjection), "+proj=stere +lat_0=-90 +lat_ts=%.9f +lon_0=%.9f " "+k=%.9f +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[1], psDefn->ProjParm[4], dfFalseEasting, dfFalseNorthing ); } /* -------------------------------------------------------------------- */ /* Equirectangular */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_Equirectangular ) { sprintf( szProjection+strlen(szProjection), "+proj=eqc +lat_0=%.9f +lon_0=%.9f +lat_ts=%.9f +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[1], psDefn->ProjParm[2], dfFalseEasting, dfFalseNorthing ); } /* -------------------------------------------------------------------- */ /* Gnomonic */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_Gnomonic ) { sprintf( szProjection+strlen(szProjection), "+proj=gnom +lat_0=%.9f +lon_0=%.9f +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[1], dfFalseEasting, dfFalseNorthing ); } /* -------------------------------------------------------------------- */ /* Orthographic */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_Orthographic ) { sprintf( szProjection+strlen(szProjection), "+proj=ortho +lat_0=%.9f +lon_0=%.9f +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[1], dfFalseEasting, dfFalseNorthing ); } /* -------------------------------------------------------------------- */ /* Lambert Azimuthal Equal Area */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_LambertAzimEqualArea ) { sprintf( szProjection+strlen(szProjection), "+proj=laea +lat_0=%.9f +lon_0=%.9f +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[1], dfFalseEasting, dfFalseNorthing ); } /* -------------------------------------------------------------------- */ /* Azimuthal Equidistant */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_AzimuthalEquidistant ) { sprintf( szProjection+strlen(szProjection), "+proj=aeqd +lat_0=%.9f +lon_0=%.9f +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[1], dfFalseEasting, dfFalseNorthing ); } /* -------------------------------------------------------------------- */ /* Miller Cylindrical */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_MillerCylindrical ) { sprintf( szProjection+strlen(szProjection), "+proj=mill +lat_0=%.9f +lon_0=%.9f +x_0=%.3f +y_0=%.3f +R_A ", psDefn->ProjParm[0], psDefn->ProjParm[1], dfFalseEasting, dfFalseNorthing ); } /* -------------------------------------------------------------------- */ /* Polyconic */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_Polyconic ) { sprintf( szProjection+strlen(szProjection), "+proj=poly +lat_0=%.9f +lon_0=%.9f +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[1], dfFalseEasting, dfFalseNorthing ); } /* -------------------------------------------------------------------- */ /* AlbersEqualArea */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_AlbersEqualArea ) { sprintf( szProjection+strlen(szProjection), "+proj=aea +lat_1=%.9f +lat_2=%.9f +lat_0=%.9f +lon_0=%.9f" " +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[1], psDefn->ProjParm[2], psDefn->ProjParm[3], dfFalseEasting, dfFalseNorthing ); } /* -------------------------------------------------------------------- */ /* EquidistantConic */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_EquidistantConic ) { sprintf( szProjection+strlen(szProjection), "+proj=eqdc +lat_1=%.9f +lat_2=%.9f +lat_0=%.9f +lon_0=%.9f" " +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[1], psDefn->ProjParm[2], psDefn->ProjParm[3], dfFalseEasting, dfFalseNorthing ); } /* -------------------------------------------------------------------- */ /* Robinson */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_Robinson ) { sprintf( szProjection+strlen(szProjection), "+proj=robin +lon_0=%.9f +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[1], dfFalseEasting, dfFalseNorthing ); } /* -------------------------------------------------------------------- */ /* VanDerGrinten */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_VanDerGrinten ) { sprintf( szProjection+strlen(szProjection), "+proj=vandg +lon_0=%.9f +x_0=%.3f +y_0=%.3f +R_A ", psDefn->ProjParm[1], dfFalseEasting, dfFalseNorthing ); } /* -------------------------------------------------------------------- */ /* Sinusoidal */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_Sinusoidal ) { sprintf( szProjection+strlen(szProjection), "+proj=sinu +lon_0=%.9f +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[1], dfFalseEasting, dfFalseNorthing ); } /* -------------------------------------------------------------------- */ /* LambertConfConic_2SP */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_LambertConfConic_2SP ) { sprintf( szProjection+strlen(szProjection), "+proj=lcc +lat_0=%.9f +lon_0=%.9f +lat_1=%.9f +lat_2=%.9f " " +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[1], psDefn->ProjParm[2], psDefn->ProjParm[3], dfFalseEasting, dfFalseNorthing ); } /* -------------------------------------------------------------------- */ /* LambertConfConic_1SP */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_LambertConfConic_1SP ) { sprintf( szProjection+strlen(szProjection), "+proj=lcc +lat_0=%.9f +lat_1=%.9f +lon_0=%.9f" " +k_0=%.9f +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[0], psDefn->ProjParm[1], psDefn->ProjParm[4], psDefn->ProjParm[5], psDefn->ProjParm[6] ); } /* -------------------------------------------------------------------- */ /* CT_CylindricalEqualArea */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_CylindricalEqualArea ) { sprintf( szProjection+strlen(szProjection), "+proj=cea +lat_ts=%.9f +lon_0=%.9f " " +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[1], psDefn->ProjParm[5], psDefn->ProjParm[6] ); } /* -------------------------------------------------------------------- */ /* NewZealandMapGrid */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_NewZealandMapGrid ) { sprintf( szProjection+strlen(szProjection), "+proj=nzmg +lat_0=%.9f +lon_0=%.9f" " +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[1], psDefn->ProjParm[5], psDefn->ProjParm[6] ); } /* -------------------------------------------------------------------- */ /* Transverse Mercator - south oriented. */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_TransvMercator_SouthOriented ) { /* this appears to be an unsupported formulation with PROJ.4 */ } /* -------------------------------------------------------------------- */ /* ObliqueMercator (Hotine) */ /* -------------------------------------------------------------------- */ else if( psDefn->CTProjection == CT_ObliqueMercator ) { /* not clear how ProjParm[3] - angle from rectified to skewed grid - should be applied ... see the +not_rot flag for PROJ.4. Just ignoring for now. */ sprintf( szProjection+strlen(szProjection), "+proj=omerc +lat_0=%.9f +lonc=%.9f +alpha=%.9f" " +k=%.9f +x_0=%.3f +y_0=%.3f ", psDefn->ProjParm[0], psDefn->ProjParm[1], psDefn->ProjParm[2], psDefn->ProjParm[4], psDefn->ProjParm[5], psDefn->ProjParm[6] ); } else if( psDefn->CTProjection == CT_HotineObliqueMercatorAzimuthCenter ) { /* special case for swiss oblique mercator : see GDAL bug 423 */ if( fabs(psDefn->ProjParm[2] - 90.0) < 0.0001 && fabs(psDefn->ProjParm[3]-90.0) < 0.0001 ) { sprintf( szProjection+strlen(szProjection), "+proj=somerc +lat_0=%.16g +lon_0=%.16g" " +k_0=%.16g +x_0=%.16g +y_0=%.16g ", psDefn->ProjParm[0], psDefn->ProjParm[1], psDefn->ProjParm[4], psDefn->ProjParm[5], psDefn->ProjParm[6] ); } else { sprintf( szProjection+strlen(szProjection), "+proj=omerc +lat_0=%.16g +lonc=%.16g +alpha=%.16g" " +k=%.16g +x_0=%.16g +y_0=%.16g ", psDefn->ProjParm[0], psDefn->ProjParm[1], psDefn->ProjParm[2], psDefn->ProjParm[4], psDefn->ProjParm[5], psDefn->ProjParm[6] ); /* RSO variant - http://trac.osgeo.org/proj/ticket/62 */ /* Note that gamma is only supported by PROJ 4.8.0 and later. */ /* FIXME: how to detect that gamma isn't set to default value */ /*if( psDefn->ProjParm[3] != 0.0 ) { sprintf( szProjection+strlen(szProjection), "+gamma=%.16g ", psDefn->ProjParm[3] ); }*/ } } GTIFProj4AppendEllipsoid(psDefn, szProjection); strcat( szProjection, szUnits ); /* If we don't have anything, reset */ if (strstr(szProjection, "+proj=") == NULL) { return CPLStrdup(""); } return CPLStrdup( szProjection ); } /************************************************************************/ /* GTIFProj4FromLatLong() */ /* */ /* Convert lat/long values to projected coordinate for a */ /* particular definition. */ /************************************************************************/ int GTIFProj4FromLatLong( GTIFDefn * psDefn, int nPoints, double *padfX, double *padfY ) { /* -------------------------------------------------------------------- */ /* Get a projection definition. */ /* -------------------------------------------------------------------- */ char *pszProjection = GTIFGetProj4Defn( psDefn ); if( pszProjection == NULL ) return FALSE; PJ_CONTEXT* ctx = proj_context_create(); char szLongLat[256]; strcpy(szLongLat, "+proj=longlat "); GTIFProj4AppendEllipsoid(psDefn, szLongLat); PJ *psPJ = proj_create_crs_to_crs( ctx, szLongLat, pszProjection, NULL ); CPLFree( pszProjection ); if( psPJ == NULL ) { proj_context_destroy(ctx); return FALSE; } /* -------------------------------------------------------------------- */ /* Process each of the points. */ /* -------------------------------------------------------------------- */ for( int i = 0; i < nPoints; i++ ) { PJ_COORD coord; coord.xyzt.x = padfX[i]; coord.xyzt.y = padfY[i]; coord.xyzt.z = 0; coord.xyzt.t = 0; coord = proj_trans(psPJ, PJ_FWD, coord); padfX[i] = coord.xyzt.x; padfY[i] = coord.xyzt.y; } proj_destroy( psPJ ); proj_context_destroy(ctx); return TRUE; } /************************************************************************/ /* GTIFProj4ToLatLong() */ /* */ /* Convert projection coordinates to lat/long for a particular */ /* definition. */ /************************************************************************/ int GTIFProj4ToLatLong( GTIFDefn * psDefn, int nPoints, double *padfX, double *padfY ) { /* -------------------------------------------------------------------- */ /* Get a projection definition. */ /* -------------------------------------------------------------------- */ char *pszProjection = GTIFGetProj4Defn( psDefn ); if( pszProjection == NULL ) return FALSE; PJ_CONTEXT* ctx = proj_context_create(); char szLongLat[256]; strcpy(szLongLat, "+proj=longlat "); GTIFProj4AppendEllipsoid(psDefn, szLongLat); PJ *psPJ = proj_create_crs_to_crs( ctx, pszProjection, szLongLat, NULL ); CPLFree( pszProjection ); if( psPJ == NULL ) { proj_context_destroy(ctx); return FALSE; } /* -------------------------------------------------------------------- */ /* Process each of the points. */ /* -------------------------------------------------------------------- */ for( int i = 0; i < nPoints; i++ ) { PJ_COORD coord; coord.xyzt.x = padfX[i]; coord.xyzt.y = padfY[i]; coord.xyzt.z = 0; coord.xyzt.t = 0; coord = proj_trans(psPJ, PJ_FWD, coord); padfX[i] = coord.xyzt.x; padfY[i] = coord.xyzt.y; } proj_destroy( psPJ ); proj_context_destroy(ctx); return TRUE; } libgeotiff-1.7.4/geo_simpletags.c0000664000175000017500000002060714622755317013747 00000000000000/****************************************************************************** * Copyright (c) 2008, Frank Warmerdam * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. ****************************************************************************** * * geo_simpletags.c TIFF Interface module that just keeps track of the * tags in memory, without depending on libtiff. * *****************************************************************************/ #include "geotiff.h" /* public GTIFF interface */ #include "geo_simpletags.h" #include "geo_tiffp.h" /* Private TIFF interface */ #include "geo_keyp.h" /* Private GTIFF interface */ static int ST_TypeSize( int st_type ); static int _GTIFGetField (tiff_t *tif, pinfo_t tag, int *count, void *value ); static int _GTIFSetField (tiff_t *tif, pinfo_t tag, int count, void *value ); static tagtype_t _GTIFTagType (tiff_t *tif, pinfo_t tag); /* * Set up default TIFF handlers. */ void GTIFSetSimpleTagsMethods(TIFFMethod *method) { if (!method) return; method->get = _GTIFGetField; method->set = _GTIFSetField; method->type = _GTIFTagType; } /* returns the value of TIFF tag , or if * the value is an array, returns an allocated buffer * containing the values. Allocate a copy of the actual * buffer, sized up for updating. */ static int _GTIFGetField (tiff_t *tif, pinfo_t tag, int *count, void *val ) { int data_type; void *internal_value; if( !ST_GetKey( (ST_TIFF*) tif, (int) tag, count, &data_type, &internal_value ) ) return 0; if( data_type != ST_TagType( tag ) ) return 0; const int item_size = ST_TypeSize( data_type ); void *ret_value = (char *)_GTIFcalloc( *count * item_size ); if (!ret_value) return 0; _TIFFmemcpy( ret_value, internal_value, item_size * *count ); *(void **)val = ret_value; return 1; } /* * Set a GeoTIFF TIFF field. */ static int _GTIFSetField (tiff_t *tif, pinfo_t tag, int count, void *value ) { const int st_type = ST_TagType( tag ); return ST_SetKey( (ST_TIFF *) tif, (int) tag, count, st_type, value ); } /* * This routine is supposed to return the TagType of the * TIFF tag. Unfortunately, "libtiff" does not provide this * service by default, so we just have to "know" what type of tags * we've got, and how many. We only define the ones Geotiff * uses here, and others return UNKNOWN. The "tif" parameter * is provided for those TIFF implementations that provide * for tag-type queries. */ static tagtype_t _GTIFTagType (tiff_t *tif, pinfo_t tag) { (void) tif; /* dummy reference */ tagtype_t ttype; switch (tag) { case GTIFF_ASCIIPARAMS: ttype=TYPE_ASCII; break; case GTIFF_PIXELSCALE: case GTIFF_TRANSMATRIX: case GTIFF_TIEPOINTS: case GTIFF_DOUBLEPARAMS: ttype=TYPE_DOUBLE; break; case GTIFF_GEOKEYDIRECTORY: ttype=TYPE_SHORT; break; default: ttype = TYPE_UNKNOWN; } return ttype; } /************************************************************************/ /* ST_TagType() */ /************************************************************************/ int ST_TagType( int tag ) { switch (tag) { case GTIFF_ASCIIPARAMS: return STT_ASCII; case GTIFF_PIXELSCALE: case GTIFF_TRANSMATRIX: case GTIFF_TIEPOINTS: case GTIFF_DOUBLEPARAMS: return STT_DOUBLE; case GTIFF_GEOKEYDIRECTORY: return STT_SHORT; } return -1; } /************************************************************************/ /* ST_TypeSize() */ /************************************************************************/ static int ST_TypeSize( int st_type ) { if( st_type == STT_ASCII ) return 1; else if( st_type == STT_SHORT ) return 2; else /* if( st_type == STT_DOUBLE ) */ return 8; } /************************************************************************/ /* ST_Create() */ /************************************************************************/ ST_TIFF *ST_Create() { return (ST_TIFF *) calloc(1,sizeof(ST_TIFF)); } /************************************************************************/ /* ST_Destroy() */ /************************************************************************/ void ST_Destroy( ST_TIFF *st ) { for( int i = 0; i < st->key_count; i++ ) free( st->key_list[i].data ); if( st->key_list ) free( st->key_list ); free( st ); } /************************************************************************/ /* ST_SetKey() */ /************************************************************************/ int ST_SetKey( ST_TIFF *st, int tag, int count, int st_type, void *data ) { /* -------------------------------------------------------------------- */ /* We should compute the length if we were not given a count */ /* -------------------------------------------------------------------- */ if (count == 0 && st_type == STT_ASCII ) { count = (int)strlen((char*)data)+1; } /* -------------------------------------------------------------------- */ /* If we already have a value for this tag, replace it. */ /* -------------------------------------------------------------------- */ const int item_size = ST_TypeSize( st_type ); for( int i = 0; i < st->key_count; i++ ) { if( st->key_list[i].tag == tag ) { free( st->key_list[i].data ); st->key_list[i].count = count; st->key_list[i].type = st_type; /* +1 to make clang static analyzer not warn about potential malloc(0) */ st->key_list[i].data = malloc(item_size*count+1); memcpy( st->key_list[i].data, data, count * item_size ); return 1; } } /* -------------------------------------------------------------------- */ /* Otherwise, add a new entry. */ /* -------------------------------------------------------------------- */ st->key_count++; st->key_list = (ST_KEY *) realloc(st->key_list, sizeof(ST_KEY) * st->key_count); st->key_list[st->key_count-1].tag = tag; st->key_list[st->key_count-1].count = count; st->key_list[st->key_count-1].type = st_type; /* +1 to make clang static analyzer not warn about potential malloc(0) */ st->key_list[st->key_count-1].data = malloc(item_size * count+1); memcpy( st->key_list[st->key_count-1].data, data, item_size * count ); return 1; } /************************************************************************/ /* ST_GetKey() */ /************************************************************************/ int ST_GetKey( ST_TIFF *st, int tag, int *count, int *st_type, void **data_ptr ) { for( int i = 0; i < st->key_count; i++ ) { if( st->key_list[i].tag == tag ) { if( count ) *count = st->key_list[i].count; if( st_type ) *st_type = st->key_list[i].type; if( data_ptr ) *data_ptr = st->key_list[i].data; return 1; } } return 0; } libgeotiff-1.7.4/COPYING0000664000175000017500000000002314020740032011576 00000000000000See LICENSE file. libgeotiff-1.7.4/geonames.h0000664000175000017500000000624314020740032012524 00000000000000/* * geonames.h * * This encapsulates all of the value-naming mechanism of * libgeotiff. * * Written By: Niles Ritter * * copyright (c) 1995 Niles D. Ritter * * Permission granted to use this software, so long as this copyright * notice accompanies any products derived therefrom. */ #ifndef LIBGEOTIFF_GEONAMES_H_ #define LIBGEOTIFF_GEONAMES_H_ struct _KeyInfo { int ki_key; const char *ki_name; }; typedef struct _KeyInfo KeyInfo; /* If memory is a premium, then omitting the * long name lists may save some space; simply * #define OMIT_GEOTIFF_NAMES in the compile statement * to remove all key->string translation. */ #ifdef ValuePair # undef ValuePair #endif #ifndef OMIT_GEOTIFF_NAMES #define ValuePair(token,value) {token,#token}, #else #define ValuePair(token,value) #endif #define END_LIST { -1, 0 } /************************************************************ * 6.2.x GeoTIFF Keys ************************************************************/ static const KeyInfo _keyInfo[] = { # include "geokeys.inc" /* geokey database */ END_LIST }; /* Keys used by GeoTIFF 1.1 (OGC 19-008) */ static const KeyInfo _keyInfoV11[] = { # include "geokeys_v1_1.inc" /* geokey database */ END_LIST }; #define COMMON_VALUES \ {KvUndefined, "Undefined"}, \ {KvUserDefined,"User-Defined"}, \ ValuePair(KvUndefined,KvUndefined) \ ValuePair(KvUserDefined,KvUserDefined) static const KeyInfo _csdefaultValue[] = { COMMON_VALUES END_LIST }; /************************************************************ * 6.3.x GeoTIFF Key Values ************************************************************/ static const KeyInfo _modeltypeValue[] = { COMMON_VALUES ValuePair(ModelTypeProjected,1) ValuePair(ModelTypeGeographic,2) ValuePair(ModelTypeGeocentric,3) ValuePair(ModelProjected,1) /* aliases */ ValuePair(ModelGeographic,2) /* aliases */ ValuePair(ModelGeocentric,3) /* aliases */ END_LIST }; static const KeyInfo _rastertypeValue[] = { COMMON_VALUES ValuePair(RasterPixelIsArea,1) ValuePair(RasterPixelIsPoint,2) END_LIST }; static const KeyInfo _geounitsValue[] = { COMMON_VALUES # include "epsg_units.inc" END_LIST }; static const KeyInfo _geographicValue[] = { COMMON_VALUES # include "epsg_gcs.inc" END_LIST }; static const KeyInfo _geodeticdatumValue[] = { COMMON_VALUES # include "epsg_datum.inc" END_LIST }; static const KeyInfo _ellipsoidValue[] = { COMMON_VALUES # include "epsg_ellipse.inc" END_LIST }; static const KeyInfo _primemeridianValue[] = { COMMON_VALUES # include "epsg_pm.inc" END_LIST }; static const KeyInfo _pcstypeValue[] = { COMMON_VALUES # include "epsg_pcs.inc" END_LIST }; static const KeyInfo _projectionValue[] = { COMMON_VALUES # include "epsg_proj.inc" END_LIST }; static const KeyInfo _coordtransValue[] = { COMMON_VALUES # include "geo_ctrans.inc" END_LIST }; static const KeyInfo _vertcstypeValue[] = { COMMON_VALUES # include "epsg_vertcs.inc" END_LIST }; static const KeyInfo _vdatumValue[] = { COMMON_VALUES ValuePair(VDatumBase,1) END_LIST }; #endif /* LIBGEOTIFF_GEONAMES_H_ */ libgeotiff-1.7.4/geo_strtod.c0000664000175000017500000001207114622755317013112 00000000000000/****************************************************************************** * $Id: cpl_strtod.cpp 21653 2011-02-08 20:01:32Z warmerdam $ * * Project: CPL - Common Portability Library * Purpose: Functions to convert ASCII string to floating point number. * Author: Andrey Kiselev, dron@ak4719.spb.edu. * Frank Warmerdam, warmerdam@pobox.com * * This file is derived from GDAL's port/cpl_strtod.cpp. * ****************************************************************************** * Copyright (c) 2006, Andrey Kiselev * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. ****************************************************************************/ #include #include #include #include "geo_tiffp.h" #include "cpl_serv.h" #ifndef NAN # ifdef HUGE_VAL # define NAN (HUGE_VAL * 0.0) # else static float CPLNaN(void) { float fNan; const int nNan = 0x7FC00000; memcpy(&fNan, &nNan, 4); return fNan; } # define NAN CPLNan() # endif #endif /************************************************************************/ /* _ReplacePointByLocalePoint() */ /************************************************************************/ static void _ReplacePointByLocalePoint(char* pszNumber, char point) { #if defined(WIN32CE) || defined(__ANDROID__) static char byPoint = 0; if (byPoint == 0) { char szBuf[16]; sprintf(szBuf, "%.1f", 1.0); byPoint = szBuf[1]; } if (point != byPoint) { int i = 0; while ( pszNumber[i] ) { if ( pszNumber[i] == point ) { pszNumber[i] = byPoint; break; } i++; } } #else struct lconv *poLconv = localeconv(); if ( poLconv && poLconv->decimal_point && strlen(poLconv->decimal_point) > 0 ) { int i = 0; const char byPoint = poLconv->decimal_point[0]; if (point != byPoint) { while ( pszNumber[i] ) { if ( pszNumber[i] == point ) { pszNumber[i] = byPoint; break; } i++; } } } #endif } /************************************************************************/ /* _StrtodDelim() */ /************************************************************************/ static double _StrtodDelim(const char *nptr, char **endptr, char point) { if (EQUAL(nptr,"nan") || EQUAL(nptr, "1.#QNAN") || EQUAL(nptr, "-1.#QNAN") || EQUAL(nptr, "-1.#IND")) return NAN; /* -------------------------------------------------------------------- */ /* We are implementing a simple method here: copy the input string */ /* into the temporary buffer, replace the specified decimal delimiter */ /* with the one, taken from locale settings and use standard strtod() */ /* on that buffer. */ /* -------------------------------------------------------------------- */ char *pszNumber = CPLStrdup( nptr ); _ReplacePointByLocalePoint(pszNumber, point); const double dfValue = strtod( pszNumber, endptr ); const int nError = errno; if ( endptr ) *endptr = (char *)nptr + (*endptr - pszNumber); CPLFree( pszNumber ); errno = nError; return dfValue; } /************************************************************************/ /* GTIFStrtod() */ /************************************************************************/ double GTIFStrtod(const char *nptr, char **endptr) { return _StrtodDelim(nptr, endptr, '.'); } /************************************************************************/ /* GTIFAtof() */ /************************************************************************/ double GTIFAtof(const char *nptr) { return GTIFStrtod(nptr, 0); } libgeotiff-1.7.4/geovalues.h0000664000175000017500000000533514020740032012721 00000000000000/********************************************************************** * * geovalues.h - Public registry for valid GEOTIFF key-values. * * Written By: Niles D. Ritter * * copyright (c) 1995 Niles D. Ritter * * Permission granted to use this software, so long as this copyright * notice accompanies any products derived therefrom. * **********************************************************************/ #ifndef LIBGEOTIFF_GEOVALUES_H_ #define LIBGEOTIFF_GEOVALUES_H_ /* If code values are added or modified, the "GvCurrentMinorRev" * number should be incremented here. If new Keys are added, then the * GvCurrentRevision number should be incremented instead, and the * GvCurrentMinorRev should be reset to zero (see "geokeys.h"). * * In addition, any changes here should be reflected in "geo_names.c" * */ #define GvCurrentMinorRev 0 /* First Major Rev EPSG Code Release */ /* * Universal key values -- defined for consistency */ #define KvUndefined 0 #define KvUserDefined 32767 #ifdef ValuePair # undef ValuePair #endif #define ValuePair(name,value) name = value, /* * The section numbers refer to the GeoTIFF Specification section * in which the code values are documented. */ /************************************************************ * 6.3.1 GeoTIFF General Codes ************************************************************/ /* 6.3.1.1 Model Type Codes */ typedef enum { ModelTypeProjected = 1, /* Projection Coordinate System */ ModelTypeGeographic = 2, /* Geographic latitude-longitude System */ ModelTypeGeocentric = 3, /* Geocentric (X,Y,Z) Coordinate System */ ModelProjected = ModelTypeProjected, /* alias */ ModelGeographic = ModelTypeGeographic, /* alias */ ModelGeocentric = ModelTypeGeocentric /* alias */ } modeltype_t; /* 6.3.1.2 Raster Type Codes */ typedef enum { RasterPixelIsArea = 1, /* Standard pixel-fills-grid-cell */ RasterPixelIsPoint = 2 /* Pixel-at-grid-vertex */ } rastertype_t; typedef enum { # include "epsg_gcs.inc" geographic_end } geographic_t; typedef enum { # include "epsg_datum.inc" geodeticdatum_end } geodeticdatum_t; typedef enum { # include "epsg_units.inc" Unit_End } geounits_t; typedef enum { # include "epsg_ellipse.inc" ellipsoid_end } ellipsoid_t; typedef enum { # include "epsg_pm.inc" primemeridian_end } primemeridian_t; typedef enum { # include "epsg_pcs.inc" pcstype_end } pcstype_t; typedef enum { # include "epsg_proj.inc" projection_end } projection_t; typedef enum { # include "geo_ctrans.inc" coordtrans_end } coordtrans_t; typedef enum { # include "epsg_vertcs.inc" vertcs_end } vertcstype_t; typedef enum { VDatumBase = 1 } vdatum_t; #endif /* LIBGEOTIFF_GEOVALUES_H_ */ libgeotiff-1.7.4/geo_set.c0000664000175000017500000001477714622755317012405 00000000000000/********************************************************************** * * geo_set.c -- Public routines for GEOTIFF GeoKey access. * * Written By: Niles D. Ritter. * * copyright (c) 1995 Niles D. Ritter * * Permission granted to use this software, so long as this copyright * notice accompanies any products derived therefrom. * **********************************************************************/ #include #include #include #include "geotiff.h" /* public interface */ #include "geo_tiffp.h" /* external TIFF interface */ #include "geo_keyp.h" /* private interface */ /** This function writes a geokey_t value to a GeoTIFF file. @param gtif The geotiff information handle from GTIFNew(). @param keyID The geokey_t name (such as ProjectedCSTypeGeoKey). This must come from the list of legal geokey_t values (an enumeration) listed below. @param type Type of the key. @param count Indicates how many values to read. At this time all keys except for strings have only one value, so index should be zero, and count should be one.

The keyID indicates the key name to be written to the file and should from the geokey_t enumeration (eg. ProjectedCSTypeGeoKey). The full list of possible geokey_t values can be found in geokeys.inc, or in the online documentation for GTIFKeyGet().

The type should be one of TYPE_SHORT, TYPE_ASCII, or TYPE_DOUBLE and will indicate the type of value being passed at the end of the argument list (the key value). The count should be one except for strings when it should be the length of the string (or zero to for this to be computed internally). As a special case a count of -1 can be used to request an existing key be deleted, in which no value is passed.

The actual value is passed at the end of the argument list, and should be a short, a double, or a char * value. Note that short and double values are passed by value rather than as pointers when count is 1, but as pointers if count is larger than 1.

Note that key values aren't actually flushed to the file until GTIFWriteKeys() is called. Till then the new values are just kept with the GTIF structure.

Example:

    GTIFKeySet(gtif, GTRasterTypeGeoKey, TYPE_SHORT, 1,
               RasterPixelIsArea);
    GTIFKeySet(gtif, GTCitationGeoKey, TYPE_ASCII, 0,
               "UTM 11 North / NAD27" );
*/ int GTIFKeySet(GTIF *gtif, geokey_t keyID, tagtype_t type, int count,...) { va_list ap; int nIndex = gtif->gt_keyindex[ keyID ]; GeoKey *key; char *data = NULL; char *val = NULL; pinfo_t sval; double dval; va_start(ap, count); /* pass singleton keys by value */ if (count>1 && type!=TYPE_ASCII) { val = va_arg(ap, char*); } else if( count == -1 ) { /* delete the indicated tag */ va_end(ap); if( nIndex < 1 ) return 0; if (gtif->gt_keys[nIndex].gk_type == TYPE_ASCII) { _GTIFFree (gtif->gt_keys[nIndex].gk_data); } while( nIndex < gtif->gt_num_keys ) { _GTIFmemcpy( gtif->gt_keys + nIndex, gtif->gt_keys + nIndex + 1, sizeof(GeoKey) ); gtif->gt_keyindex[gtif->gt_keys[nIndex].gk_key] = nIndex; nIndex++; } gtif->gt_num_keys--; gtif->gt_nshorts -= sizeof(KeyEntry)/sizeof(pinfo_t); gtif->gt_keyindex[keyID] = 0; gtif->gt_flags |= FLAG_FILE_MODIFIED; return 1; } else switch (type) { case TYPE_SHORT: /* cppcheck-suppress unreadVariable */ sval=(pinfo_t) va_arg(ap, int); val=(char *)&sval; break; case TYPE_DOUBLE: /* cppcheck-suppress unreadVariable */ dval=va_arg(ap, dblparam_t); val=(char *)&dval; break; case TYPE_ASCII: val=va_arg(ap, char*); count = (int)strlen(val) + 1; /* force = string length */ break; default: assert( FALSE ); break; } va_end(ap); /* We assume here that there are no multi-valued SHORTS ! */ if (nIndex) { /* Key already exists */ key = gtif->gt_keys+nIndex; if (type!=key->gk_type || count > key->gk_count) { /* need to reset data pointer */ key->gk_type = type; key->gk_count = count; key->gk_size = _gtiff_size[ type ]; if( type == TYPE_DOUBLE ) { key->gk_data = (char *)(gtif->gt_double + gtif->gt_ndoubles); gtif->gt_ndoubles += count; } } } else { /* We need to create the key */ if (gtif->gt_num_keys == MAX_KEYS) return 0; key = gtif->gt_keys + ++gtif->gt_num_keys; nIndex = gtif->gt_num_keys; gtif->gt_keyindex[ keyID ] = nIndex; key->gk_key = keyID; key->gk_type = type; key->gk_count = count; key->gk_size = _gtiff_size[ type ]; if ((geokey_t)gtif->gt_keymin > keyID) gtif->gt_keymin=keyID; if ((geokey_t)gtif->gt_keymax < keyID) gtif->gt_keymax=keyID; gtif->gt_nshorts += sizeof(KeyEntry)/sizeof(pinfo_t); if( type == TYPE_DOUBLE ) { key->gk_data = (char *)(gtif->gt_double + gtif->gt_ndoubles); gtif->gt_ndoubles += count; } } switch (type) { case TYPE_SHORT: if (count > 1) return 0; data = (char *)&key->gk_data; /* store value *in* data */ break; case TYPE_DOUBLE: data = key->gk_data; break; case TYPE_ASCII: /* throw away existing data and allocate room for new data */ if (key->gk_data != 0) { _GTIFFree(key->gk_data); } key->gk_data = (char *)_GTIFcalloc(count); key->gk_count = count; data = key->gk_data; break; default: return 0; } _GTIFmemcpy(data, val, count*key->gk_size); gtif->gt_flags |= FLAG_FILE_MODIFIED; return 1; } /* Set the version numbers of the GeoTIFF directory */ int GTIFSetVersionNumbers(GTIF* gtif, unsigned short version, unsigned short key_revision, unsigned short minor_revision) { gtif->gt_version = version; gtif->gt_rev_major = key_revision; gtif->gt_rev_minor = minor_revision; return 1; } libgeotiff-1.7.4/test/0000775000175000017500000000000014755113373011630 500000000000000libgeotiff-1.7.4/test/testlistgeo0000775000175000017500000002454314632634101014043 00000000000000: # Test listgeo TEST_CLI_DIR=`dirname $0` DATA_DIR=`dirname $0`/data EXE=$1 usage() { echo "Usage: ${0} " echo exit 1 } if test -z "${EXE}"; then EXE=../bin/listgeo fi if test ! -x ${EXE}; then echo "*** ERROR: Can not find '${EXE}' program!" exit 1 fi echo "============================================" echo "Running ${0} using ${EXE}:" echo "============================================" OUT=testlistgeo_out rm -f ${OUT} echo "Testing listgeo byte.tif" >> ${OUT} $EXE ${DATA_DIR}/byte.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo byte_v11.tif" >> ${OUT} $EXE ${DATA_DIR}/byte_v11.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo pcs_32064.tif" >> ${OUT} $EXE ${DATA_DIR}/pcs_32064.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo GeogPrimeMeridianGeoKey.tif" >> ${OUT} $EXE ${DATA_DIR}/GeogPrimeMeridianGeoKey.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo GeogGeodeticDatumGeoKey.tif" >> ${OUT} $EXE ${DATA_DIR}/GeogGeodeticDatumGeoKey.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo GeogAngularUnitsGeoKey_9114.tif" >> ${OUT} $EXE ${DATA_DIR}/GeogAngularUnitsGeoKey_9114.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo ProjLinearUnitsGeoKey_9036.tif" >> ${OUT} $EXE ${DATA_DIR}/ProjLinearUnitsGeoKey_9036.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo ProjectedCSTypeGeoKey_28191_cassini_soldner.tif" >> ${OUT} $EXE -no_corners ${DATA_DIR}/ProjectedCSTypeGeoKey_28191_cassini_soldner.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo cassini_soldner.tif" >> ${OUT} $EXE -no_corners ${DATA_DIR}/cassini_soldner.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo ProjectedCSTypeGeoKey_27200_new_zealand_mapping_grid.tif" >> ${OUT} $EXE ${DATA_DIR}/ProjectedCSTypeGeoKey_27200_new_zealand_mapping_grid.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo new_zealand_mapping_grid.tif" >> ${OUT} $EXE ${DATA_DIR}/new_zealand_mapping_grid.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo ProjectedCSTypeGeoKey_29101_polyconic.tif" >> ${OUT} $EXE ${DATA_DIR}/ProjectedCSTypeGeoKey_29101_polyconic.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo polyconic.tif" >> ${OUT} $EXE ${DATA_DIR}/polyconic.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo ProjectedCSTypeGeoKey_6808_hotine_oblique_mercator_variant_a.tif" >> ${OUT} $EXE ${DATA_DIR}/ProjectedCSTypeGeoKey_6808_hotine_oblique_mercator_variant_a.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo hotine_oblique_mercator_variant_a.tif" >> ${OUT} $EXE ${DATA_DIR}/hotine_oblique_mercator_variant_a.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo ProjectedCSTypeGeoKey_8065_hotine_oblique_mercator_variant_b.tif" >> ${OUT} $EXE ${DATA_DIR}/ProjectedCSTypeGeoKey_8065_hotine_oblique_mercator_variant_b.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo hotine_oblique_mercator_variant_b.tif" >> ${OUT} $EXE ${DATA_DIR}/hotine_oblique_mercator_variant_b.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo ProjectedCSTypeGeoKey_8441_oblique_mercator_laborde.tif" >> ${OUT} $EXE ${DATA_DIR}/ProjectedCSTypeGeoKey_8441_oblique_mercator_laborde.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo oblique_mercator_laborde.tif" >> ${OUT} $EXE ${DATA_DIR}/oblique_mercator_laborde.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo ProjectedCSTypeGeoKey_5456_lcc1sp.tif" >> ${OUT} $EXE ${DATA_DIR}/ProjectedCSTypeGeoKey_5456_lcc1sp.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo lcc1sp.tif" >> ${OUT} $EXE ${DATA_DIR}/lcc1sp.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo ProjectedCSTypeGeoKey_5329_mercator1sp.tif" >> ${OUT} $EXE ${DATA_DIR}/ProjectedCSTypeGeoKey_5329_mercator1sp.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo mercator1sp.tif" >> ${OUT} $EXE ${DATA_DIR}/mercator1sp.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo ProjectedCSTypeGeoKey_5641_mercator2sp.tif" >> ${OUT} $EXE ${DATA_DIR}/ProjectedCSTypeGeoKey_5641_mercator2sp.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo mercator2sp.tif" >> ${OUT} $EXE ${DATA_DIR}/mercator2sp.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo ProjectedCSTypeGeoKey_5588_oblique_stereographic.tif" >> ${OUT} $EXE ${DATA_DIR}/ProjectedCSTypeGeoKey_5588_oblique_stereographic.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo oblique_stereographic.tif" >> ${OUT} $EXE ${DATA_DIR}/oblique_stereographic.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo ProjectedCSTypeGeoKey_5482_polar_stereographic_variant_a.tif" >> ${OUT} $EXE ${DATA_DIR}/ProjectedCSTypeGeoKey_5482_polar_stereographic_variant_a.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo polar_stereographic_variant_a.tif" >> ${OUT} $EXE ${DATA_DIR}/polar_stereographic_variant_a.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo ProjectedCSTypeGeoKey_3032_polar_stereographic_variant_b.tif" >> ${OUT} $EXE ${DATA_DIR}/ProjectedCSTypeGeoKey_3032_polar_stereographic_variant_b.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo polar_stereographic_variant_b.tif" >> ${OUT} $EXE ${DATA_DIR}/polar_stereographic_variant_b.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo ProjectedCSTypeGeoKey_3814_transverse_mercator.tif" >> ${OUT} $EXE ${DATA_DIR}/ProjectedCSTypeGeoKey_3814_transverse_mercator.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo transverse_mercator.tif" >> ${OUT} $EXE ${DATA_DIR}/transverse_mercator.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo ProjectedCSTypeGeoKey_2046_transverse_mercator_south_oriented.tif" >> ${OUT} $EXE ${DATA_DIR}/ProjectedCSTypeGeoKey_2046_transverse_mercator_south_oriented.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo transverse_mercator_south_oriented.tif" >> ${OUT} $EXE ${DATA_DIR}/transverse_mercator_south_oriented.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo ProjectedCSTypeGeoKey_3812_lcc2sp.tif" >> ${OUT} $EXE ${DATA_DIR}/ProjectedCSTypeGeoKey_3812_lcc2sp.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo lcc2sp.tif" >> ${OUT} $EXE ${DATA_DIR}/lcc2sp.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo ProjectedCSTypeGeoKey_3083_albers_equal_area.tif" >> ${OUT} $EXE ${DATA_DIR}/ProjectedCSTypeGeoKey_3083_albers_equal_area.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo albers_equal_area.tif" >> ${OUT} $EXE ${DATA_DIR}/albers_equal_area.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo ProjectedCSTypeGeoKey_3035_lambert_azimuthal_equal_area.tif" >> ${OUT} $EXE ${DATA_DIR}/ProjectedCSTypeGeoKey_3035_lambert_azimuthal_equal_area.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo lambert_azimuthal_equal_area.tif" >> ${OUT} $EXE ${DATA_DIR}/lambert_azimuthal_equal_area.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo ProjectedCSTypeGeoKey_3410_lambert_cylindrical_equal_area.tif" >> ${OUT} $EXE ${DATA_DIR}/ProjectedCSTypeGeoKey_3410_lambert_cylindrical_equal_area.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo lambert_cylindrical_equal_area.tif" >> ${OUT} $EXE ${DATA_DIR}/lambert_cylindrical_equal_area.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo ProjectedCSTypeGeoKey_4087_equidistant_cylindrical.tif" >> ${OUT} $EXE ${DATA_DIR}/ProjectedCSTypeGeoKey_4087_equidistant_cylindrical.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo equidistant_cylindrical.tif" >> ${OUT} $EXE ${DATA_DIR}/equidistant_cylindrical.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo pixel_is_point_wgs84.tif" >> ${OUT} $EXE ${DATA_DIR}/pixel_is_point_wgs84.tif >>${OUT} echo "" >>${OUT} # Normalize for results depending on the exact version of PROJ / EPSG database sed "s/ETRS89-extended/ETRS89/g" < ${OUT} > ${OUT}.tmp mv ${OUT}.tmp ${OUT} sed "s/Projection = 15914 (BLM zone 14N (US survey .*))/Projection = 15914 (BLM zone 14N)/g" < ${OUT} > ${OUT}.tmp mv ${OUT}.tmp ${OUT} sed "s/Projection = 6753 (Oregon Columbia River West zone (.*))/Projection = 6753 (Oregon Columbia River West zone)/" < ${OUT} > ${OUT}.tmp mv ${OUT}.tmp ${OUT} sed "s/ProjCenterLongGeoKey: 46.437229 ( 46d26'14.02\"E)/ProjCenterLongGeoKey: 46.437229 ( 46d26'14.03\"E)/" < ${OUT} > ${OUT}.tmp mv ${OUT}.tmp ${OUT} sed "s/ETRS89-extended/ETRS89/g" < ${TEST_CLI_DIR}/testlistgeo_out.dist > testlistgeo_out.dist.normalized sed "s/GCS: 4053\/Unspecified datum based upon the International 1924 Authalic Sphere/GCS: 10346\/NSIDC Authalic Sphere/g" < ${OUT} > ${OUT}.tmp mv ${OUT}.tmp ${OUT} sed "s/Datum: 6053\/Not specified (based on International 1924 Authalic Sphere)/Datum: 1360\/NSIDC International 1924 Authalic Sphere/g" < ${OUT} > ${OUT}.tmp mv ${OUT}.tmp ${OUT} sed "s/GCS: 4053\/Unspecified datum based upon the International 1924 Authalic Sphere/GCS: 10346\/NSIDC Authalic Sphere/g" < testlistgeo_out.dist.normalized > testlistgeo_out.dist.normalized.tmp mv testlistgeo_out.dist.normalized.tmp testlistgeo_out.dist.normalized sed "s/Datum: 6053\/Not specified (based on International 1924 Authalic Sphere)/Datum: 1360\/NSIDC International 1924 Authalic Sphere/g" < testlistgeo_out.dist.normalized > testlistgeo_out.dist.normalized.tmp mv testlistgeo_out.dist.normalized.tmp testlistgeo_out.dist.normalized sed "s/Projection = 15914 (BLM zone 14N (US survey .*))/Projection = 15914 (BLM zone 14N)/" < testlistgeo_out.dist.normalized > testlistgeo_out.dist.normalized.tmp mv testlistgeo_out.dist.normalized.tmp testlistgeo_out.dist.normalized sed "s/Projection = 6753 (Oregon Columbia River West zone (.*))/Projection = 6753 (Oregon Columbia River West zone)/" < testlistgeo_out.dist.normalized > testlistgeo_out.dist.normalized.tmp mv testlistgeo_out.dist.normalized.tmp testlistgeo_out.dist.normalized sed "s/ProjCenterLongGeoKey: 46.437229 ( 46d26'14.02\"E)/ProjCenterLongGeoKey: 46.437229 ( 46d26'14.03\"E)/" < testlistgeo_out.dist.normalized > testlistgeo_out.dist.normalized.tmp mv testlistgeo_out.dist.normalized.tmp testlistgeo_out.dist.normalized echo "Testing listgeo epsg_27563_only_pcs_code.tif" >> ${OUT} $EXE ${DATA_DIR}/epsg_27563_only_pcs_code.tif >>${OUT} echo "" >>${OUT} echo "Testing listgeo epsg_27563_allgeokeys.tif" >> ${OUT} $EXE ${DATA_DIR}/epsg_27563_allgeokeys.tif >>${OUT} echo "" >>${OUT} # do 'diff' with distribution results # after cleaning for avoid spurios result due # to different build dir sed -e "s/Testing listgeo .*test/Testing listgeo ..\/test/" -i ${OUT} echo "diff ${OUT} with testlistgeo_out.dist" diff -u ${OUT} testlistgeo_out.dist.normalized if [ $? -ne 0 ] ; then echo "" echo "PROBLEMS HAVE OCCURRED" echo "test file ${OUT} saved" echo exit 100 else echo "TEST OK" echo "test file ${OUT} removed" echo rm testlistgeo_out.dist.normalized /bin/rm -f ${OUT} exit 0 fi libgeotiff-1.7.4/test/testlistgeo_out.dist0000664000175000017500000026453214632634101015675 00000000000000Testing listgeo byte.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,21): "NAD27 / UTM zone 11N" ProjectedCSTypeGeoKey (Short,1): PCS_NAD27_UTM_zone_11N ProjLinearUnitsGeoKey (Short,1): Linear_Meter End_Of_Keys. End_Of_Geotiff. PCS = 26711 (NAD27 / UTM zone 11N) Projection = 16011 (UTM zone 11N) Projection Method: CT_TransverseMercator ProjNatOriginLatGeoKey: 0.000000 ( 0d 0' 0.00"N) ProjNatOriginLongGeoKey: -117.000000 (117d 0' 0.00"W) ProjScaleAtNatOriginGeoKey: 0.999600 ProjFalseEastingGeoKey: 500000.000000 m ProjFalseNorthingGeoKey: 0.000000 m GCS: 4267/NAD27 Datum: 6267/North American Datum 1927 Ellipsoid: 7008/Clarke 1866 (6378206.40,6356583.80) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (117d38'28.21"W, 33d54' 8.47"N) Lower Left ( 440720.000, 3750120.000) (117d38'27.92"W, 33d53'29.51"N) Upper Right ( 441920.000, 3751320.000) (117d37'41.48"W, 33d54' 8.71"N) Lower Right ( 441920.000, 3750120.000) (117d37'41.20"W, 33d53'29.75"N) Center ( 441320.000, 3750720.000) (117d38' 4.70"W, 33d53'49.11"N) Testing listgeo byte_v11.tif Geotiff_Information: Version: 1 Key_Revision: 1.1 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,21): "NAD27 / UTM zone 11N" ProjectedCRSGeoKey (Short,1): Code-26711 (NAD27 / UTM zone 11N) ProjLinearUnitsGeoKey (Short,1): Code-9001 (metre) End_Of_Keys. End_Of_Geotiff. PCS = 26711 (NAD27 / UTM zone 11N) Projection = 16011 (UTM zone 11N) Projection Method: CT_TransverseMercator ProjNatOriginLatGeoKey: 0.000000 ( 0d 0' 0.00"N) ProjNatOriginLongGeoKey: -117.000000 (117d 0' 0.00"W) ProjScaleAtNatOriginGeoKey: 0.999600 ProjFalseEastingGeoKey: 500000.000000 m ProjFalseNorthingGeoKey: 0.000000 m GCS: 4267/NAD27 Datum: 6267/North American Datum 1927 Ellipsoid: 7008/Clarke 1866 (6378206.40,6356583.80) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (117d38'28.21"W, 33d54' 8.47"N) Lower Left ( 440720.000, 3750120.000) (117d38'27.92"W, 33d53'29.51"N) Upper Right ( 441920.000, 3751320.000) (117d37'41.48"W, 33d54' 8.71"N) Lower Right ( 441920.000, 3750120.000) (117d37'41.20"W, 33d53'29.75"N) Center ( 441320.000, 3750720.000) (117d38' 4.70"W, 33d53'49.11"N) Testing listgeo pcs_32064.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,23): "NAD27 / BLM 14N (ftUS)" GeogCitationGeoKey (Ascii,6): "NAD27" GeogAngularUnitsGeoKey (Short,1): Angular_Degree ProjectedCSTypeGeoKey (Short,1): Code-32064 (NAD27 / BLM 14N (ftUS)) ProjLinearUnitsGeoKey (Short,1): Linear_Foot_US_Survey End_Of_Keys. End_Of_Geotiff. PCS = 32064 (NAD27 / BLM 14N (ftUS)) Projection = 15914 (BLM zone 14N (US survey feet)) Projection Method: CT_TransverseMercator ProjNatOriginLatGeoKey: 0.000000 ( 0d 0' 0.00"N) ProjNatOriginLongGeoKey: -99.000000 ( 99d 0' 0.00"W) ProjScaleAtNatOriginGeoKey: 0.999600 ProjFalseEastingGeoKey: 500000.001016 m ProjFalseNorthingGeoKey: 0.000000 m GCS: 4267/NAD27 Datum: 6267/North American Datum 1927 Ellipsoid: 7008/Clarke 1866 (6378206.40,6356583.80) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9003/US survey foot (0.304801m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (102d20'17.15"W, 10d19'37.13"N) Lower Left ( 440720.000, 3751260.000) (102d20'17.15"W, 10d19'36.54"N) Upper Right ( 440780.000, 3751320.000) (102d20'16.55"W, 10d19'37.14"N) Lower Right ( 440780.000, 3751260.000) (102d20'16.55"W, 10d19'36.54"N) Center ( 440750.000, 3751290.000) (102d20'16.85"W, 10d19'36.84"N) Testing listgeo GeogPrimeMeridianGeoKey.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 130 32 0 ModelPixelScaleTag (1,3): 1 1 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeGeographic GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,16): "Just An Example" GeographicTypeGeoKey (Short,1): User-Defined GeogCitationGeoKey (Ascii,24): "Everest Ellipsoid Used." GeogGeodeticDatumGeoKey (Short,1): User-Defined GeogPrimeMeridianGeoKey (Short,1): PM_Paris GeogLinearUnitsGeoKey (Short,1): Linear_Meter GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogEllipsoidGeoKey (Short,1): Ellipse_Everest_1830_1967_Definition GeogSemiMajorAxisGeoKey (Double,1): 6377298.556 GeogInvFlatteningGeoKey (Double,1): 300.8017 End_Of_Keys. End_Of_Geotiff. Ellipsoid: 7016/Everest 1830 (1967 Definition) (6377298.56,6356097.55) Prime Meridian: 8903/Paris (2.337229/ 2d20'14.03"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left (130d 0' 0.00"E, 32d 0' 0.00"N) Lower Left (130d 0' 0.00"E, 31d 0' 0.00"N) Upper Right (131d 0' 0.00"E, 32d 0' 0.00"N) Lower Right (131d 0' 0.00"E, 31d 0' 0.00"N) Center (130d30' 0.00"E, 31d30' 0.00"N) Testing listgeo GeogGeodeticDatumGeoKey.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 130 32 0 ModelPixelScaleTag (1,3): 1 1 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeGeographic GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GeographicTypeGeoKey (Short,1): User-Defined GeogGeodeticDatumGeoKey (Short,1): Code-6742 (Geodetic Datum of Malaysia 2000) GeogLinearUnitsGeoKey (Short,1): Linear_Meter GeogAngularUnitsGeoKey (Short,1): Angular_Degree End_Of_Keys. End_Of_Geotiff. Datum: 6742/Geodetic Datum of Malaysia 2000 Ellipsoid: 7019/GRS 1980 (6378137.00,6356752.31) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left (130d 0' 0.00"E, 32d 0' 0.00"N) Lower Left (130d 0' 0.00"E, 31d 0' 0.00"N) Upper Right (131d 0' 0.00"E, 32d 0' 0.00"N) Lower Right (131d 0' 0.00"E, 31d 0' 0.00"N) Center (130d30' 0.00"E, 31d30' 0.00"N) Testing listgeo GeogAngularUnitsGeoKey_9114.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 130 32 0 ModelPixelScaleTag (1,3): 1 1 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeGeographic GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GeographicTypeGeoKey (Short,1): User-Defined GeogGeodeticDatumGeoKey (Short,1): Code-6742 (Geodetic Datum of Malaysia 2000) GeogLinearUnitsGeoKey (Short,1): Linear_Meter GeogAngularUnitsGeoKey (Short,1): Code-9114 (mil_6400) End_Of_Keys. End_Of_Geotiff. Datum: 6742/Geodetic Datum of Malaysia 2000 Ellipsoid: 7019/GRS 1980 (6378137.00,6356752.31) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left (130d 0' 0.00"E, 32d 0' 0.00"N) Lower Left (130d 0' 0.00"E, 31d 0' 0.00"N) Upper Right (131d 0' 0.00"E, 32d 0' 0.00"N) Lower Right (131d 0' 0.00"E, 31d 0' 0.00"N) Center (130d30' 0.00"E, 31d30' 0.00"N) Testing listgeo ProjLinearUnitsGeoKey_9036.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,23): "NAD27 / BLM 14N (ftUS)" GeogCitationGeoKey (Ascii,6): "NAD27" GeogAngularUnitsGeoKey (Short,1): Angular_Degree ProjectedCSTypeGeoKey (Short,1): Code-32064 (NAD27 / BLM 14N (ftUS)) ProjLinearUnitsGeoKey (Short,1): Code-9036 (kilometre) End_Of_Keys. End_Of_Geotiff. PCS = 32064 (NAD27 / BLM 14N (ftUS)) Projection = 15914 (BLM zone 14N (US survey feet)) Projection Method: CT_TransverseMercator ProjNatOriginLatGeoKey: 0.000000 ( 0d 0' 0.00"N) ProjNatOriginLongGeoKey: -99.000000 ( 99d 0' 0.00"W) ProjScaleAtNatOriginGeoKey: 0.999600 ProjFalseEastingGeoKey: 500000.001016 m ProjFalseNorthingGeoKey: 0.000000 m GCS: 4267/NAD27 Datum: 6267/North American Datum 1927 Ellipsoid: 7008/Clarke 1866 (6378206.40,6356583.80) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9036/kilometre (1000.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (invalid) Lower Left ( 440720.000, 3751260.000) (invalid) Upper Right ( 440780.000, 3751320.000) (invalid) Lower Right ( 440780.000, 3751260.000) (invalid) Center ( 440750.000, 3751290.000) (invalid) Testing listgeo ProjectedCSTypeGeoKey_28191_cassini_soldner.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea ProjectedCSTypeGeoKey (Short,1): Code-28191 (Palestine 1923 / Palestine Grid) End_Of_Keys. End_Of_Geotiff. PCS = 28191 (Palestine 1923 / Palestine Grid) Projection = 18201 (Palestine Grid) Projection Method: CT_CassiniSoldner ProjNatOriginLatGeoKey: 31.734097 ( 31d44' 2.75"N) ProjNatOriginLongGeoKey: 35.212081 ( 35d12'43.49"E) ProjFalseEastingGeoKey: 170251.555000 m ProjFalseNorthingGeoKey: 126867.909000 m GCS: 4281/Palestine 1923 Datum: 6281/Palestine 1923 Ellipsoid: 7010/Clarke 1880 (Benoit) (6378300.79,6356566.43) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Testing listgeo cassini_soldner.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,8): "unnamed" GeographicTypeGeoKey (Short,1): User-Defined GeogCitationGeoKey (Ascii,83): "GCS Name = unnamed ellipse|Datum = unknown|Ellipsoid = unnamed|Primem = Greenwich|" GeogGeodeticDatumGeoKey (Short,1): User-Defined GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogEllipsoidGeoKey (Short,1): User-Defined GeogSemiMajorAxisGeoKey (Double,1): 6378300.789 GeogInvFlatteningGeoKey (Double,1): 293.46631553898 GeogPrimeMeridianLongGeoKey (Double,1): 0 ProjectedCSTypeGeoKey (Short,1): User-Defined ProjectionGeoKey (Short,1): User-Defined ProjCoordTransGeoKey (Short,1): CT_CassiniSoldner ProjLinearUnitsGeoKey (Short,1): Linear_Meter ProjNatOriginLongGeoKey (Double,1): 35.2120805555556 ProjNatOriginLatGeoKey (Double,1): 31.7340969444444 ProjFalseEastingGeoKey (Double,1): 170251.555 ProjFalseNorthingGeoKey (Double,1): 126867.909 End_Of_Keys. End_Of_Geotiff. Projection Method: CT_CassiniSoldner ProjNatOriginLatGeoKey: 31.734097 ( 31d44' 2.75"N) ProjNatOriginLongGeoKey: 35.212081 ( 35d12'43.49"E) ProjScaleAtNatOriginGeoKey: 1.000000 ProjFalseEastingGeoKey: 170251.555000 m ProjFalseNorthingGeoKey: 126867.909000 m Projection Linear Units: 9001/metre (1.000000m) Testing listgeo ProjectedCSTypeGeoKey_27200_new_zealand_mapping_grid.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea ProjectedCSTypeGeoKey (Short,1): PCS_GD49_NZ_Map_Grid End_Of_Keys. End_Of_Geotiff. PCS = 27200 (NZGD49 / New Zealand Map Grid) Projection = 19917 (New Zealand Map Grid) Projection Method: CT_NewZealandMapGrid ProjNatOriginLatGeoKey: -41.000000 ( 41d 0' 0.00"S) ProjNatOriginLongGeoKey: 173.000000 (173d 0' 0.00"E) ProjFalseEastingGeoKey: 2510000.000000 m ProjFalseNorthingGeoKey: 6023150.000000 m GCS: 4272/NZGD49 Datum: 6272/New Zealand Geodetic Datum 1949 Ellipsoid: 7022/International 1924 (6378388.00,6356911.95) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (143d59'58.89"E, 55d42'40.66"S) Lower Left ( 440720.000, 3751260.000) (143d59'58.39"E, 55d42'41.52"S) Upper Right ( 440780.000, 3751320.000) (144d 0' 0.42"E, 55d42'40.94"S) Lower Right ( 440780.000, 3751260.000) (143d59'59.92"E, 55d42'41.81"S) Center ( 440750.000, 3751290.000) (143d59'59.40"E, 55d42'41.23"S) Testing listgeo new_zealand_mapping_grid.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,8): "unknown" GeographicTypeGeoKey (Short,1): User-Defined GeogCitationGeoKey (Ascii,39): "GCS Name = unknown|Primem = Greenwich|" GeogGeodeticDatumGeoKey (Short,1): Datum_New_Zealand_Geodetic_Datum_1949 GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogSemiMajorAxisGeoKey (Double,1): 6378388 GeogInvFlatteningGeoKey (Double,1): 297 GeogPrimeMeridianLongGeoKey (Double,1): 0 ProjectedCSTypeGeoKey (Short,1): User-Defined ProjectionGeoKey (Short,1): User-Defined ProjCoordTransGeoKey (Short,1): CT_NewZealandMapGrid ProjLinearUnitsGeoKey (Short,1): Linear_Meter ProjNatOriginLongGeoKey (Double,1): 173 ProjNatOriginLatGeoKey (Double,1): -41 ProjFalseEastingGeoKey (Double,1): 2510000 ProjFalseNorthingGeoKey (Double,1): 6023150 End_Of_Keys. End_Of_Geotiff. Projection Method: CT_NewZealandMapGrid ProjCenterLatGeoKey: -41.000000 ( 41d 0' 0.00"S) ProjCenterLongGeoKey: 173.000000 (173d 0' 0.00"E) ProjFalseEastingGeoKey: 2510000.000000 m ProjFalseNorthingGeoKey: 6023150.000000 m Datum: 6272/New Zealand Geodetic Datum 1949 Ellipsoid: 7022/International 1924 (6378388.00,6356911.95) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (143d59'58.89"E, 55d42'40.66"S) Lower Left ( 440720.000, 3751260.000) (143d59'58.39"E, 55d42'41.52"S) Upper Right ( 440780.000, 3751320.000) (144d 0' 0.42"E, 55d42'40.94"S) Lower Right ( 440780.000, 3751260.000) (143d59'59.92"E, 55d42'41.81"S) Center ( 440750.000, 3751290.000) (143d59'59.40"E, 55d42'41.23"S) Testing listgeo ProjectedCSTypeGeoKey_29101_polyconic.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea ProjectedCSTypeGeoKey (Short,1): Code-29101 (SAD69 / Brazil Polyconic) End_Of_Keys. End_Of_Geotiff. PCS = 29101 (SAD69 / Brazil Polyconic) Projection = 19941 (Brazil Polyconic) Projection Method: CT_Polyconic ProjNatOriginLatGeoKey: 0.000000 ( 0d 0' 0.00"N) ProjNatOriginLongGeoKey: -54.000000 ( 54d 0' 0.00"W) ProjFalseEastingGeoKey: 5000000.000000 m ProjFalseNorthingGeoKey: 10000000.000000 m GCS: 4618/SAD69 Datum: 6618/South American Datum 1969 Ellipsoid: 7050/GRS 1967 Modified (6378160.00,6356774.72) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (113d19' 8.06"W, 41d40' 0.55"S) Lower Left ( 440720.000, 3751260.000) (113d19' 9.60"W, 41d40' 1.72"S) Upper Right ( 440780.000, 3751320.000) (113d19' 5.97"W, 41d40' 1.51"S) Lower Right ( 440780.000, 3751260.000) (113d19' 7.51"W, 41d40' 2.67"S) Center ( 440750.000, 3751290.000) (113d19' 7.78"W, 41d40' 1.61"S) Testing listgeo polyconic.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,25): "SAD69 / Brazil Polyconic" GeographicTypeGeoKey (Short,1): Code-4618 (SAD69) GeogCitationGeoKey (Ascii,6): "SAD69" GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogSemiMajorAxisGeoKey (Double,1): 6378160 GeogInvFlatteningGeoKey (Double,1): 298.25 ProjectedCSTypeGeoKey (Short,1): User-Defined ProjectionGeoKey (Short,1): User-Defined ProjCoordTransGeoKey (Short,1): CT_Polyconic ProjLinearUnitsGeoKey (Short,1): Linear_Meter ProjNatOriginLongGeoKey (Double,1): -54 ProjNatOriginLatGeoKey (Double,1): 0 ProjFalseEastingGeoKey (Double,1): 5000000 ProjFalseNorthingGeoKey (Double,1): 10000000 ProjScaleAtNatOriginGeoKey (Double,1): 1 End_Of_Keys. End_Of_Geotiff. Projection Method: CT_Polyconic ProjNatOriginLatGeoKey: 0.000000 ( 0d 0' 0.00"N) ProjNatOriginLongGeoKey: -54.000000 ( 54d 0' 0.00"W) ProjScaleAtNatOriginGeoKey: 1.000000 ProjFalseEastingGeoKey: 5000000.000000 m ProjFalseNorthingGeoKey: 10000000.000000 m GCS: 4618/SAD69 Datum: 6618/South American Datum 1969 Ellipsoid: 7050/GRS 1967 Modified (6378160.00,6356774.72) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (113d19' 8.06"W, 41d40' 0.55"S) Lower Left ( 440720.000, 3751260.000) (113d19' 9.60"W, 41d40' 1.72"S) Upper Right ( 440780.000, 3751320.000) (113d19' 5.97"W, 41d40' 1.51"S) Lower Right ( 440780.000, 3751260.000) (113d19' 7.51"W, 41d40' 2.67"S) Center ( 440750.000, 3751290.000) (113d19' 7.78"W, 41d40' 1.61"S) Testing listgeo ProjectedCSTypeGeoKey_6808_hotine_oblique_mercator_variant_a.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea ProjectedCSTypeGeoKey (Short,1): Code-6808 (NAD83(CORS96) / Oregon Columbia River West zone (m)) End_Of_Keys. End_Of_Geotiff. PCS = 6808 (NAD83(CORS96) / Oregon Columbia River West zone (m)) Projection = 6753 (Oregon Columbia River West zone (meters)) Projection Method: CT_ObliqueMercator ProjCenterLatGeoKey: 45.916667 ( 45d55' 0.00"N) ProjCenterLongGeoKey: -123.000000 (123d 0' 0.00"W) ProjAzimuthAngleGeoKey: 295.000000 (295d 0' 0.00"N) ProjRectifiedGridAngleGeoKey: 295.000000 (295d 0' 0.00"N) ProjScaleAtCenterGeoKey: 1.000000 ProjFalseEastingGeoKey: 7000000.000000 m ProjFalseNorthingGeoKey: -3000000.000000 m GCS: 6783/NAD83(CORS96) Datum: 1133/NAD83 (Continuously Operating Reference Station 1996) Ellipsoid: 7019/GRS 1980 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (108d21'24.58"E, 42d37'41.03"N) Lower Left ( 440720.000, 3751260.000) (108d21'26.88"E, 42d37'40.94"N) Upper Right ( 440780.000, 3751320.000) (108d21'24.71"E, 42d37'42.73"N) Lower Right ( 440780.000, 3751260.000) (108d21'27.01"E, 42d37'42.64"N) Center ( 440750.000, 3751290.000) (108d21'25.79"E, 42d37'41.83"N) Testing listgeo hotine_oblique_mercator_variant_a.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,52): "NAD83(CORS96) / Oregon Columbia River West zone (m)" GeographicTypeGeoKey (Short,1): Code-6783 (NAD83(CORS96)) GeogCitationGeoKey (Ascii,14): "NAD83(CORS96)" GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogSemiMajorAxisGeoKey (Double,1): 6378137 GeogInvFlatteningGeoKey (Double,1): 298.257222101 ProjectedCSTypeGeoKey (Short,1): User-Defined ProjectionGeoKey (Short,1): User-Defined ProjCoordTransGeoKey (Short,1): CT_ObliqueMercator ProjLinearUnitsGeoKey (Short,1): Linear_Meter ProjFalseEastingGeoKey (Double,1): 7000000 ProjFalseNorthingGeoKey (Double,1): -3000000 ProjCenterLongGeoKey (Double,1): -123 ProjCenterLatGeoKey (Double,1): 45.9166666666667 ProjScaleAtCenterGeoKey (Double,1): 1 ProjAzimuthAngleGeoKey (Double,1): 295 ProjRectifiedGridAngleGeoKey (Double,1): 295 End_Of_Keys. End_Of_Geotiff. Projection Method: CT_ObliqueMercator ProjCenterLatGeoKey: 45.916667 ( 45d55' 0.00"N) ProjCenterLongGeoKey: -123.000000 (123d 0' 0.00"W) ProjAzimuthAngleGeoKey: 295.000000 (295d 0' 0.00"N) ProjRectifiedGridAngleGeoKey: 295.000000 (295d 0' 0.00"N) ProjScaleAtCenterGeoKey: 1.000000 ProjFalseEastingGeoKey: 7000000.000000 m ProjFalseNorthingGeoKey: -3000000.000000 m GCS: 6783/NAD83(CORS96) Datum: 1133/NAD83 (Continuously Operating Reference Station 1996) Ellipsoid: 7019/GRS 1980 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (108d21'24.58"E, 42d37'41.03"N) Lower Left ( 440720.000, 3751260.000) (108d21'26.88"E, 42d37'40.94"N) Upper Right ( 440780.000, 3751320.000) (108d21'24.71"E, 42d37'42.73"N) Lower Right ( 440780.000, 3751260.000) (108d21'27.01"E, 42d37'42.64"N) Center ( 440750.000, 3751290.000) (108d21'25.79"E, 42d37'41.83"N) Testing listgeo ProjectedCSTypeGeoKey_8065_hotine_oblique_mercator_variant_b.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea ProjectedCSTypeGeoKey (Short,1): Code-8065 (NAD83(2011) / PCCS zone 1 (ft)) End_Of_Keys. End_Of_Geotiff. PCS = 8065 (NAD83(2011) / PCCS zone 1 (ft)) Projection = 8061 (Pima County zone 1 East (ft)) Projection Method: CT_HotineObliqueMercatorAzimuthCenter ProjCenterLatGeoKey: 32.250000 ( 32d15' 0.00"N) ProjCenterLongGeoKey: -111.400000 (111d24' 0.00"W) ProjAzimuthAngleGeoKey: 45.000000 ( 45d 0' 0.00"N) ProjRectifiedGridAngleGeoKey: 45.000000 ( 45d 0' 0.00"N) ProjScaleAtCenterGeoKey: 1.000110 ProjFalseEastingGeoKey: 48768.000000 m ProjFalseNorthingGeoKey: 243840.000000 m GCS: 6318/NAD83(2011) Datum: 1116/NAD83 (National Spatial Reference System 2011) Ellipsoid: 7019/GRS 1980 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9002/foot (0.304800m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (110d24'54.42"W, 40d20'32.45"N) Lower Left ( 440720.000, 3751260.000) (110d24'54.42"W, 40d20'31.86"N) Upper Right ( 440780.000, 3751320.000) (110d24'53.64"W, 40d20'32.45"N) Lower Right ( 440780.000, 3751260.000) (110d24'53.65"W, 40d20'31.86"N) Center ( 440750.000, 3751290.000) (110d24'54.03"W, 40d20'32.15"N) Testing listgeo hotine_oblique_mercator_variant_b.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,31): "NAD83(2011) / PCCS zone 1 (ft)" GeographicTypeGeoKey (Short,1): Code-6318 (NAD83(2011)) GeogCitationGeoKey (Ascii,12): "NAD83(2011)" GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogSemiMajorAxisGeoKey (Double,1): 6378137 GeogInvFlatteningGeoKey (Double,1): 298.257222101 Unknown-3059 (Short,1): Unknown-1 ProjectedCSTypeGeoKey (Short,1): User-Defined ProjectionGeoKey (Short,1): User-Defined ProjCoordTransGeoKey (Short,1): CT_HotineObliqueMercatorAzimuthCenter ProjLinearUnitsGeoKey (Short,1): Linear_Foot ProjFalseEastingGeoKey (Double,1): 160000 ProjFalseNorthingGeoKey (Double,1): 800000 ProjCenterLongGeoKey (Double,1): -111.4 ProjCenterLatGeoKey (Double,1): 32.25 ProjScaleAtCenterGeoKey (Double,1): 1.00011 ProjAzimuthAngleGeoKey (Double,1): 45 ProjRectifiedGridAngleGeoKey (Double,1): 45 End_Of_Keys. End_Of_Geotiff. Projection Method: CT_HotineObliqueMercatorAzimuthCenter ProjCenterLatGeoKey: 32.250000 ( 32d15' 0.00"N) ProjCenterLongGeoKey: -111.400000 (111d24' 0.00"W) ProjAzimuthAngleGeoKey: 45.000000 ( 45d 0' 0.00"N) ProjRectifiedGridAngleGeoKey: 45.000000 ( 45d 0' 0.00"N) ProjScaleAtCenterGeoKey: 1.000110 ProjFalseEastingGeoKey: 48768.000000 m ProjFalseNorthingGeoKey: 243840.000000 m GCS: 6318/NAD83(2011) Datum: 1116/NAD83 (National Spatial Reference System 2011) Ellipsoid: 7019/GRS 1980 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9002/foot (0.304800m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (110d24'54.42"W, 40d20'32.45"N) Lower Left ( 440720.000, 3751260.000) (110d24'54.42"W, 40d20'31.86"N) Upper Right ( 440780.000, 3751320.000) (110d24'53.64"W, 40d20'32.45"N) Lower Right ( 440780.000, 3751260.000) (110d24'53.65"W, 40d20'31.86"N) Center ( 440750.000, 3751290.000) (110d24'54.03"W, 40d20'32.15"N) Testing listgeo ProjectedCSTypeGeoKey_8441_oblique_mercator_laborde.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea ProjectedCSTypeGeoKey (Short,1): Code-8441 (Tananarive / Laborde Grid) End_Of_Keys. End_Of_Geotiff. PCS = 8441 (Tananarive / Laborde Grid) Projection = 8440 (Laborde Grid (Greenwich)) Projection Method: CT_ObliqueMercator_Laborde ProjCenterLatGeoKey: -18.900000 ( 18d54' 0.00"S) ProjCenterLongGeoKey: 46.437229 ( 46d26'14.02"E) ProjAzimuthAngleGeoKey: 18.900000 ( 18d54' 0.00"N) ProjScaleAtCenterGeoKey: 0.999500 ProjFalseEastingGeoKey: 400000.000000 m ProjFalseNorthingGeoKey: 800000.000000 m GCS: 4297/Tananarive Datum: 6297/Tananarive 1925 Ellipsoid: 7022/International 1924 (6378388.00,6356911.95) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 46d30'50.44"E, 7d41'54.99"N) Lower Left ( 440720.000, 3751260.000) ( 46d30'50.50"E, 7d41'53.06"N) Upper Right ( 440780.000, 3751320.000) ( 46d30'52.38"E, 7d41'55.05"N) Lower Right ( 440780.000, 3751260.000) ( 46d30'52.44"E, 7d41'53.12"N) Center ( 440750.000, 3751290.000) ( 46d30'51.44"E, 7d41'54.06"N) Testing listgeo oblique_mercator_laborde.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,26): "Tananarive / Laborde Grid" GeographicTypeGeoKey (Short,1): GCS_Tananarive GeogCitationGeoKey (Ascii,11): "Tananarive" GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogSemiMajorAxisGeoKey (Double,1): 6378388 GeogInvFlatteningGeoKey (Double,1): 297 ProjectedCSTypeGeoKey (Short,1): User-Defined ProjectionGeoKey (Short,1): User-Defined ProjCoordTransGeoKey (Short,1): CT_ObliqueMercator_Laborde ProjLinearUnitsGeoKey (Short,1): Linear_Meter ProjFalseEastingGeoKey (Double,1): 400000 ProjFalseNorthingGeoKey (Double,1): 800000 ProjCenterLongGeoKey (Double,1): 46.4372291666667 ProjCenterLatGeoKey (Double,1): -18.9 ProjScaleAtCenterGeoKey (Double,1): 0.9995 ProjAzimuthAngleGeoKey (Double,1): 18.9 End_Of_Keys. End_Of_Geotiff. Projection Method: CT_ObliqueMercator_Laborde ProjCenterLatGeoKey: -18.900000 ( 18d54' 0.00"S) ProjCenterLongGeoKey: 46.437229 ( 46d26'14.03"E) ProjAzimuthAngleGeoKey: 18.900000 ( 18d54' 0.00"N) ProjScaleAtCenterGeoKey: 0.999500 ProjFalseEastingGeoKey: 400000.000000 m ProjFalseNorthingGeoKey: 800000.000000 m GCS: 4297/Tananarive Datum: 6297/Tananarive 1925 Ellipsoid: 7022/International 1924 (6378388.00,6356911.95) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 46d30'50.44"E, 7d41'54.99"N) Lower Left ( 440720.000, 3751260.000) ( 46d30'50.50"E, 7d41'53.06"N) Upper Right ( 440780.000, 3751320.000) ( 46d30'52.38"E, 7d41'55.05"N) Lower Right ( 440780.000, 3751260.000) ( 46d30'52.44"E, 7d41'53.12"N) Center ( 440750.000, 3751290.000) ( 46d30'51.44"E, 7d41'54.06"N) Testing listgeo ProjectedCSTypeGeoKey_5456_lcc1sp.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea ProjectedCSTypeGeoKey (Short,1): Code-5456 (Ocotepeque 1935 / Costa Rica Norte) End_Of_Keys. End_Of_Geotiff. PCS = 5456 (Ocotepeque 1935 / Costa Rica Norte) Projection = 5390 (Costa Rica Norte) Projection Method: CT_LambertConfConic_1SP ProjNatOriginLatGeoKey: 10.466667 ( 10d28' 0.00"N) ProjNatOriginLongGeoKey: -84.333333 ( 84d20' 0.00"W) ProjScaleAtNatOriginGeoKey: 0.999957 ProjFalseEastingGeoKey: 500000.000000 m ProjFalseNorthingGeoKey: 271820.522000 m GCS: 5451/Ocotepeque 1935 Datum: 1070/Ocotepeque 1935 Ellipsoid: 7008/Clarke 1866 (6378206.40,6356583.80) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 84d56' 7.81"W, 40d22'42.48"N) Lower Left ( 440720.000, 3751260.000) ( 84d56' 7.81"W, 40d22'40.80"N) Upper Right ( 440780.000, 3751320.000) ( 84d56' 5.62"W, 40d22'42.48"N) Lower Right ( 440780.000, 3751260.000) ( 84d56' 5.62"W, 40d22'40.80"N) Center ( 440750.000, 3751290.000) ( 84d56' 6.72"W, 40d22'41.64"N) Testing listgeo lcc1sp.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,35): "Ocotepeque 1935 / Costa Rica Norte" GeographicTypeGeoKey (Short,1): Code-5451 (Ocotepeque 1935) GeogCitationGeoKey (Ascii,16): "Ocotepeque 1935" GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogSemiMajorAxisGeoKey (Double,1): 6378206.4 GeogInvFlatteningGeoKey (Double,1): 294.978698213898 ProjectedCSTypeGeoKey (Short,1): User-Defined ProjectionGeoKey (Short,1): User-Defined ProjCoordTransGeoKey (Short,1): CT_LambertConfConic_1SP ProjLinearUnitsGeoKey (Short,1): Linear_Meter ProjNatOriginLongGeoKey (Double,1): -84.3333333333333 ProjNatOriginLatGeoKey (Double,1): 10.4666666666667 ProjFalseEastingGeoKey (Double,1): 500000 ProjFalseNorthingGeoKey (Double,1): 271820.522 ProjScaleAtNatOriginGeoKey (Double,1): 0.99995696 End_Of_Keys. End_Of_Geotiff. Projection Method: CT_LambertConfConic_1SP ProjNatOriginLatGeoKey: 10.466667 ( 10d28' 0.00"N) ProjNatOriginLongGeoKey: -84.333333 ( 84d20' 0.00"W) ProjScaleAtNatOriginGeoKey: 0.999957 ProjFalseEastingGeoKey: 500000.000000 m ProjFalseNorthingGeoKey: 271820.522000 m GCS: 5451/Ocotepeque 1935 Datum: 1070/Ocotepeque 1935 Ellipsoid: 7008/Clarke 1866 (6378206.40,6356583.80) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 84d56' 7.81"W, 40d22'42.48"N) Lower Left ( 440720.000, 3751260.000) ( 84d56' 7.81"W, 40d22'40.80"N) Upper Right ( 440780.000, 3751320.000) ( 84d56' 5.62"W, 40d22'42.48"N) Lower Right ( 440780.000, 3751260.000) ( 84d56' 5.62"W, 40d22'40.80"N) Center ( 440750.000, 3751290.000) ( 84d56' 6.72"W, 40d22'41.64"N) Testing listgeo ProjectedCSTypeGeoKey_5329_mercator1sp.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea ProjectedCSTypeGeoKey (Short,1): Code-5329 (Segara (Jakarta) / NEIEZ) End_Of_Keys. End_Of_Geotiff. PCS = 5329 (Segara (Jakarta) / NEIEZ) Projection = 5328 (Netherlands East Indies Equatorial Zone (Jkt)) Projection Method: CT_Mercator ProjNatOriginLatGeoKey: 0.000000 ( 0d 0' 0.00"N) ProjNatOriginLongGeoKey: 3.192281 ( 3d11'32.21"E) ProjScaleAtNatOriginGeoKey: 0.997000 ProjFalseEastingGeoKey: 3900000.000000 m ProjFalseNorthingGeoKey: 900000.000000 m GCS: 4820/Segara (Jakarta) Datum: 6820/Gunung Segara (Jakarta) Ellipsoid: 7004/Bessel 1841 (6377397.16,6356078.96) Prime Meridian: 8908/Jakarta (106.807719/106d48'27.79"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 27d53'11.64"W, 24d57' 0.31"N) Lower Left ( 440720.000, 3751260.000) ( 27d53'11.64"W, 24d56'58.54"N) Upper Right ( 440780.000, 3751320.000) ( 27d53' 9.70"W, 24d57' 0.31"N) Lower Right ( 440780.000, 3751260.000) ( 27d53' 9.70"W, 24d56'58.54"N) Center ( 440750.000, 3751290.000) ( 27d53'10.67"W, 24d56'59.43"N) Testing listgeo mercator1sp.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,25): "Segara (Jakarta) / NEIEZ" GeographicTypeGeoKey (Short,1): Code-4820 (Segara (Jakarta)) GeogCitationGeoKey (Ascii,17): "Segara (Jakarta)" GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogSemiMajorAxisGeoKey (Double,1): 6377397.155 GeogInvFlatteningGeoKey (Double,1): 299.1528128 ProjectedCSTypeGeoKey (Short,1): User-Defined ProjectionGeoKey (Short,1): User-Defined ProjCoordTransGeoKey (Short,1): CT_Mercator ProjLinearUnitsGeoKey (Short,1): Linear_Meter ProjNatOriginLongGeoKey (Double,1): 3.19228055555556 ProjNatOriginLatGeoKey (Double,1): 0 ProjFalseEastingGeoKey (Double,1): 3900000 ProjFalseNorthingGeoKey (Double,1): 900000 ProjScaleAtNatOriginGeoKey (Double,1): 0.997 End_Of_Keys. End_Of_Geotiff. Projection Method: CT_Mercator ProjNatOriginLatGeoKey: 0.000000 ( 0d 0' 0.00"N) ProjNatOriginLongGeoKey: 3.192281 ( 3d11'32.21"E) ProjScaleAtNatOriginGeoKey: 0.997000 ProjFalseEastingGeoKey: 3900000.000000 m ProjFalseNorthingGeoKey: 900000.000000 m GCS: 4820/Segara (Jakarta) Datum: 6820/Gunung Segara (Jakarta) Ellipsoid: 7004/Bessel 1841 (6377397.16,6356078.96) Prime Meridian: 8908/Jakarta (106.807719/106d48'27.79"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 27d53'11.64"W, 24d57' 0.31"N) Lower Left ( 440720.000, 3751260.000) ( 27d53'11.64"W, 24d56'58.54"N) Upper Right ( 440780.000, 3751320.000) ( 27d53' 9.70"W, 24d57' 0.31"N) Lower Right ( 440780.000, 3751260.000) ( 27d53' 9.70"W, 24d56'58.54"N) Center ( 440750.000, 3751290.000) ( 27d53'10.67"W, 24d56'59.43"N) Testing listgeo ProjectedCSTypeGeoKey_5641_mercator2sp.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea ProjectedCSTypeGeoKey (Short,1): Code-5641 (SIRGAS 2000 / Brazil Mercator) End_Of_Keys. End_Of_Geotiff. PCS = 5641 (SIRGAS 2000 / Brazil Mercator) Projection = 5640 (Petrobras Mercator) Projection Method: CT_Mercator ProjNatOriginLatGeoKey: 0.000000 ( 0d 0' 0.00"N) ProjNatOriginLongGeoKey: -43.000000 ( 43d 0' 0.00"W) ProjStdParallel1GeoKey: -2.000000 ( 2d 0' 0.00"S) ProjFalseEastingGeoKey: 5000000.000000 m ProjFalseNorthingGeoKey: 10000000.000000 m GCS: 4674/SIRGAS 2000 Datum: 6674/Sistema de Referencia Geocentrico para las AmericaS 2000 Ellipsoid: 7019/GRS 1980 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 83d58'53.42"W, 49d 3'29.83"S) Lower Left ( 440720.000, 3751260.000) ( 83d58'53.42"W, 49d 3'31.11"S) Upper Right ( 440780.000, 3751320.000) ( 83d58'51.48"W, 49d 3'29.83"S) Lower Right ( 440780.000, 3751260.000) ( 83d58'51.48"W, 49d 3'31.11"S) Center ( 440750.000, 3751290.000) ( 83d58'52.45"W, 49d 3'30.47"S) Testing listgeo mercator2sp.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,30): "SIRGAS 2000 / Brazil Mercator" GeographicTypeGeoKey (Short,1): Code-4674 (SIRGAS 2000) GeogCitationGeoKey (Ascii,12): "SIRGAS 2000" GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogSemiMajorAxisGeoKey (Double,1): 6378137 GeogInvFlatteningGeoKey (Double,1): 298.257222101 ProjectedCSTypeGeoKey (Short,1): User-Defined ProjectionGeoKey (Short,1): User-Defined ProjCoordTransGeoKey (Short,1): CT_Mercator ProjLinearUnitsGeoKey (Short,1): Linear_Meter ProjStdParallel1GeoKey (Double,1): -2 ProjNatOriginLongGeoKey (Double,1): -43 ProjNatOriginLatGeoKey (Double,1): 0 ProjFalseEastingGeoKey (Double,1): 5000000 ProjFalseNorthingGeoKey (Double,1): 10000000 End_Of_Keys. End_Of_Geotiff. Projection Method: CT_Mercator ProjNatOriginLatGeoKey: 0.000000 ( 0d 0' 0.00"N) ProjNatOriginLongGeoKey: -43.000000 ( 43d 0' 0.00"W) ProjStdParallel1GeoKey: -2.000000 ( 2d 0' 0.00"S) ProjFalseEastingGeoKey: 5000000.000000 m ProjFalseNorthingGeoKey: 10000000.000000 m GCS: 4674/SIRGAS 2000 Datum: 6674/Sistema de Referencia Geocentrico para las AmericaS 2000 Ellipsoid: 7019/GRS 1980 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 83d58'53.42"W, 49d 3'29.83"S) Lower Left ( 440720.000, 3751260.000) ( 83d58'53.42"W, 49d 3'31.11"S) Upper Right ( 440780.000, 3751320.000) ( 83d58'51.48"W, 49d 3'29.83"S) Lower Right ( 440780.000, 3751260.000) ( 83d58'51.48"W, 49d 3'31.11"S) Center ( 440750.000, 3751290.000) ( 83d58'52.45"W, 49d 3'30.47"S) Testing listgeo ProjectedCSTypeGeoKey_5588_oblique_stereographic.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea ProjectedCSTypeGeoKey (Short,1): Code-5588 (NAD27 / New Brunswick Stereographic (NAD27)) End_Of_Keys. End_Of_Geotiff. PCS = 5588 (NAD27 / New Brunswick Stereographic (NAD27)) Projection = 5587 (New Brunswick Stereographic (NAD27)) Projection Method: CT_ObliqueStereographic ProjNatOriginLatGeoKey: 46.500000 ( 46d30' 0.00"N) ProjNatOriginLongGeoKey: -66.500000 ( 66d30' 0.00"W) ProjScaleAtNatOriginGeoKey: 0.999912 ProjFalseEastingGeoKey: 304800.000000 m ProjFalseNorthingGeoKey: 304800.000000 m GCS: 4267/NAD27 Datum: 6267/North American Datum 1927 Ellipsoid: 7008/Clarke 1866 (6378206.40,6356583.80) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9002/foot (0.304800m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 69d 5'16.12"W, 54d 0' 2.70"N) Lower Left ( 440720.000, 3751260.000) ( 69d 5'16.09"W, 54d 0' 2.12"N) Upper Right ( 440780.000, 3751320.000) ( 69d 5'15.13"W, 54d 0' 2.72"N) Lower Right ( 440780.000, 3751260.000) ( 69d 5'15.09"W, 54d 0' 2.14"N) Center ( 440750.000, 3751290.000) ( 69d 5'15.61"W, 54d 0' 2.42"N) Testing listgeo oblique_stereographic.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,44): "NAD27 / New Brunswick Stereographic (NAD27)" GeographicTypeGeoKey (Short,1): GCS_NAD27 GeogCitationGeoKey (Ascii,6): "NAD27" GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogSemiMajorAxisGeoKey (Double,1): 6378206.4 GeogInvFlatteningGeoKey (Double,1): 294.978698213898 Unknown-3059 (Short,1): Unknown-1 ProjectedCSTypeGeoKey (Short,1): User-Defined ProjectionGeoKey (Short,1): User-Defined ProjCoordTransGeoKey (Short,1): CT_ObliqueStereographic ProjLinearUnitsGeoKey (Short,1): Linear_Foot ProjNatOriginLongGeoKey (Double,1): -66.5 ProjNatOriginLatGeoKey (Double,1): 46.5 ProjFalseEastingGeoKey (Double,1): 1000000 ProjFalseNorthingGeoKey (Double,1): 1000000 ProjScaleAtNatOriginGeoKey (Double,1): 0.999912 End_Of_Keys. End_Of_Geotiff. Projection Method: CT_ObliqueStereographic ProjNatOriginLatGeoKey: 46.500000 ( 46d30' 0.00"N) ProjNatOriginLongGeoKey: -66.500000 ( 66d30' 0.00"W) ProjScaleAtNatOriginGeoKey: 0.999912 ProjFalseEastingGeoKey: 304800.000000 m ProjFalseNorthingGeoKey: 304800.000000 m GCS: 4267/NAD27 Datum: 6267/North American Datum 1927 Ellipsoid: 7008/Clarke 1866 (6378206.40,6356583.80) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9002/foot (0.304800m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 69d 5'16.12"W, 54d 0' 2.70"N) Lower Left ( 440720.000, 3751260.000) ( 69d 5'16.09"W, 54d 0' 2.12"N) Upper Right ( 440780.000, 3751320.000) ( 69d 5'15.13"W, 54d 0' 2.72"N) Lower Right ( 440780.000, 3751260.000) ( 69d 5'15.09"W, 54d 0' 2.14"N) Center ( 440750.000, 3751290.000) ( 69d 5'15.61"W, 54d 0' 2.42"N) Testing listgeo ProjectedCSTypeGeoKey_5482_polar_stereographic_variant_a.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea ProjectedCSTypeGeoKey (Short,1): Code-5482 (RSRGD2000 / RSPS2000) End_Of_Keys. End_Of_Geotiff. PCS = 5482 (RSRGD2000 / RSPS2000) Projection = 5478 (Ross Sea Polar Stereographic 2000) Projection Method: CT_PolarStereographic ProjNatOriginLatGeoKey: -90.000000 ( 90d 0' 0.00"S) ProjStraightVertPoleLongGeoKey: 180.000000 (180d 0' 0.00"E) ProjScaleAtNatOriginGeoKey: 0.994000 ProjFalseEastingGeoKey: 5000000.000000 m ProjFalseNorthingGeoKey: 1000000.000000 m GCS: 4764/RSRGD2000 Datum: 6764/Ross Sea Region Geodetic Datum 2000 Ellipsoid: 7019/GRS 1980 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (121d 6'32.72"E, 44d29'35.28"S) Lower Left ( 440720.000, 3751260.000) (121d 6'30.73"E, 44d29'36.14"S) Upper Right ( 440780.000, 3751320.000) (121d 6'33.92"E, 44d29'36.70"S) Lower Right ( 440780.000, 3751260.000) (121d 6'31.93"E, 44d29'37.56"S) Center ( 440750.000, 3751290.000) (121d 6'32.32"E, 44d29'36.42"S) Testing listgeo polar_stereographic_variant_a.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,21): "RSRGD2000 / RSPS2000" GeographicTypeGeoKey (Short,1): Code-4764 (RSRGD2000) GeogCitationGeoKey (Ascii,10): "RSRGD2000" GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogSemiMajorAxisGeoKey (Double,1): 6378137 GeogInvFlatteningGeoKey (Double,1): 298.257222101 ProjectedCSTypeGeoKey (Short,1): User-Defined ProjectionGeoKey (Short,1): User-Defined ProjCoordTransGeoKey (Short,1): CT_PolarStereographic ProjLinearUnitsGeoKey (Short,1): Linear_Meter ProjNatOriginLatGeoKey (Double,1): -90 ProjFalseEastingGeoKey (Double,1): 5000000 ProjFalseNorthingGeoKey (Double,1): 1000000 ProjScaleAtNatOriginGeoKey (Double,1): 0.994 ProjStraightVertPoleLongGeoKey (Double,1): 180 End_Of_Keys. End_Of_Geotiff. Projection Method: CT_PolarStereographic ProjNatOriginLatGeoKey: -90.000000 ( 90d 0' 0.00"S) ProjStraightVertPoleLongGeoKey: 180.000000 (180d 0' 0.00"E) ProjScaleAtNatOriginGeoKey: 0.994000 ProjFalseEastingGeoKey: 5000000.000000 m ProjFalseNorthingGeoKey: 1000000.000000 m GCS: 4764/RSRGD2000 Datum: 6764/Ross Sea Region Geodetic Datum 2000 Ellipsoid: 7019/GRS 1980 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (121d 6'32.72"E, 44d29'35.28"S) Lower Left ( 440720.000, 3751260.000) (121d 6'30.73"E, 44d29'36.14"S) Upper Right ( 440780.000, 3751320.000) (121d 6'33.92"E, 44d29'36.70"S) Lower Right ( 440780.000, 3751260.000) (121d 6'31.93"E, 44d29'37.56"S) Center ( 440750.000, 3751290.000) (121d 6'32.32"E, 44d29'36.42"S) Testing listgeo ProjectedCSTypeGeoKey_3032_polar_stereographic_variant_b.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea ProjectedCSTypeGeoKey (Short,1): Code-3032 (WGS 84 / Australian Antarctic Polar Stereographic) End_Of_Keys. End_Of_Geotiff. PCS = 3032 (WGS 84 / Australian Antarctic Polar Stereographic) Projection = 19993 (Australian Antarctic Polar Stereographic) Projection Method: CT_PolarStereographic ProjNatOriginLatGeoKey: -71.000000 ( 71d 0' 0.00"S) ProjStraightVertPoleLongGeoKey: 70.000000 ( 70d 0' 0.00"E) ProjScaleAtNatOriginGeoKey: 1.000000 ProjFalseEastingGeoKey: 6000000.000000 m ProjFalseNorthingGeoKey: 6000000.000000 m GCS: 4326/WGS 84 Datum: 6326/World Geodetic System 1984 Ellipsoid: 7030/WGS 84 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 42d 1'22.44"W, 38d27' 1.75"S) Lower Left ( 440720.000, 3751260.000) ( 42d 1'24.35"W, 38d27' 1.15"S) Upper Right ( 440780.000, 3751320.000) ( 42d 1'23.21"W, 38d27' 3.26"S) Lower Right ( 440780.000, 3751260.000) ( 42d 1'25.13"W, 38d27' 2.65"S) Center ( 440750.000, 3751290.000) ( 42d 1'23.78"W, 38d27' 2.20"S) Testing listgeo polar_stereographic_variant_b.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,50): "WGS 84 / Australian Antarctic Polar Stereographic" GeographicTypeGeoKey (Short,1): GCS_WGS_84 GeogCitationGeoKey (Ascii,7): "WGS 84" GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogSemiMajorAxisGeoKey (Double,1): 6378137 GeogInvFlatteningGeoKey (Double,1): 298.257223563 ProjectedCSTypeGeoKey (Short,1): User-Defined ProjectionGeoKey (Short,1): User-Defined ProjCoordTransGeoKey (Short,1): CT_PolarStereographic ProjLinearUnitsGeoKey (Short,1): Linear_Meter ProjNatOriginLatGeoKey (Double,1): -71 ProjFalseEastingGeoKey (Double,1): 6000000 ProjFalseNorthingGeoKey (Double,1): 6000000 ProjScaleAtNatOriginGeoKey (Double,1): 1 ProjStraightVertPoleLongGeoKey (Double,1): 70 End_Of_Keys. End_Of_Geotiff. Projection Method: CT_PolarStereographic ProjNatOriginLatGeoKey: -71.000000 ( 71d 0' 0.00"S) ProjStraightVertPoleLongGeoKey: 70.000000 ( 70d 0' 0.00"E) ProjScaleAtNatOriginGeoKey: 1.000000 ProjFalseEastingGeoKey: 6000000.000000 m ProjFalseNorthingGeoKey: 6000000.000000 m GCS: 4326/WGS 84 Datum: 6326/World Geodetic System 1984 Ellipsoid: 7030/WGS 84 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 42d 1'22.44"W, 38d27' 1.75"S) Lower Left ( 440720.000, 3751260.000) ( 42d 1'24.35"W, 38d27' 1.15"S) Upper Right ( 440780.000, 3751320.000) ( 42d 1'23.21"W, 38d27' 3.26"S) Lower Right ( 440780.000, 3751260.000) ( 42d 1'25.13"W, 38d27' 2.65"S) Center ( 440750.000, 3751290.000) ( 42d 1'23.78"W, 38d27' 2.20"S) Testing listgeo ProjectedCSTypeGeoKey_3814_transverse_mercator.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea ProjectedCSTypeGeoKey (Short,1): Code-3814 (NAD83 / Mississippi TM) End_Of_Keys. End_Of_Geotiff. PCS = 3814 (NAD83 / Mississippi TM) Projection = 3813 (Mississippi Transverse Mercator) Projection Method: CT_TransverseMercator ProjNatOriginLatGeoKey: 32.500000 ( 32d30' 0.00"N) ProjNatOriginLongGeoKey: -89.750000 ( 89d45' 0.00"W) ProjScaleAtNatOriginGeoKey: 0.999834 ProjFalseEastingGeoKey: 500000.000000 m ProjFalseNorthingGeoKey: 1300000.000000 m GCS: 4269/NAD83 Datum: 6269/North American Datum 1983 Ellipsoid: 7019/GRS 1980 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 90d39'59.68"W, 54d33'48.58"N) Lower Left ( 440720.000, 3751260.000) ( 90d39'59.64"W, 54d33'46.64"N) Upper Right ( 440780.000, 3751320.000) ( 90d39'56.34"W, 54d33'48.60"N) Lower Right ( 440780.000, 3751260.000) ( 90d39'56.30"W, 54d33'46.66"N) Center ( 440750.000, 3751290.000) ( 90d39'57.99"W, 54d33'47.62"N) Testing listgeo transverse_mercator.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,23): "NAD83 / Mississippi TM" GeographicTypeGeoKey (Short,1): GCS_NAD83 GeogCitationGeoKey (Ascii,6): "NAD83" GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogSemiMajorAxisGeoKey (Double,1): 6378137 GeogInvFlatteningGeoKey (Double,1): 298.257222101 ProjectedCSTypeGeoKey (Short,1): User-Defined ProjectionGeoKey (Short,1): User-Defined ProjCoordTransGeoKey (Short,1): CT_TransverseMercator ProjLinearUnitsGeoKey (Short,1): Linear_Meter ProjNatOriginLongGeoKey (Double,1): -89.75 ProjNatOriginLatGeoKey (Double,1): 32.5 ProjFalseEastingGeoKey (Double,1): 500000 ProjFalseNorthingGeoKey (Double,1): 1300000 ProjScaleAtNatOriginGeoKey (Double,1): 0.9998335 End_Of_Keys. End_Of_Geotiff. Projection Method: CT_TransverseMercator ProjNatOriginLatGeoKey: 32.500000 ( 32d30' 0.00"N) ProjNatOriginLongGeoKey: -89.750000 ( 89d45' 0.00"W) ProjScaleAtNatOriginGeoKey: 0.999834 ProjFalseEastingGeoKey: 500000.000000 m ProjFalseNorthingGeoKey: 1300000.000000 m GCS: 4269/NAD83 Datum: 6269/North American Datum 1983 Ellipsoid: 7019/GRS 1980 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 90d39'59.68"W, 54d33'48.58"N) Lower Left ( 440720.000, 3751260.000) ( 90d39'59.64"W, 54d33'46.64"N) Upper Right ( 440780.000, 3751320.000) ( 90d39'56.34"W, 54d33'48.60"N) Lower Right ( 440780.000, 3751260.000) ( 90d39'56.30"W, 54d33'46.66"N) Center ( 440750.000, 3751290.000) ( 90d39'57.99"W, 54d33'47.62"N) Testing listgeo ProjectedCSTypeGeoKey_2046_transverse_mercator_south_oriented.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea ProjectedCSTypeGeoKey (Short,1): Code-2046 (Hartebeesthoek94 / Lo15) End_Of_Keys. End_Of_Geotiff. PCS = 2046 (Hartebeesthoek94 / Lo15) Projection = 17515 (South African Survey Grid zone 15) Projection Method: CT_TransvMercator_SouthOrientated ProjNatOriginLatGeoKey: 0.000000 ( 0d 0' 0.00"N) ProjNatOriginLongGeoKey: 15.000000 ( 15d 0' 0.00"E) ProjScaleAtNatOriginGeoKey: 1.000000 ProjFalseEastingGeoKey: 0.000000 m ProjFalseNorthingGeoKey: 0.000000 m GCS: 4148/Hartebeesthoek94 Datum: 6148/Hartebeesthoek94 Ellipsoid: 7030/WGS 84 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) Lower Left ( 440720.000, 3751260.000) Upper Right ( 440780.000, 3751320.000) Lower Right ( 440780.000, 3751260.000) Center ( 440750.000, 3751290.000) Testing listgeo transverse_mercator_south_oriented.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,24): "Hartebeesthoek94 / Lo15" GeographicTypeGeoKey (Short,1): Code-4148 (Hartebeesthoek94) GeogCitationGeoKey (Ascii,17): "Hartebeesthoek94" GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogSemiMajorAxisGeoKey (Double,1): 6378137 GeogInvFlatteningGeoKey (Double,1): 298.257223563 ProjectedCSTypeGeoKey (Short,1): User-Defined ProjectionGeoKey (Short,1): User-Defined ProjCoordTransGeoKey (Short,1): CT_TransvMercator_SouthOrientated ProjLinearUnitsGeoKey (Short,1): Linear_Meter ProjNatOriginLongGeoKey (Double,1): 15 ProjNatOriginLatGeoKey (Double,1): 0 ProjFalseEastingGeoKey (Double,1): 0 ProjFalseNorthingGeoKey (Double,1): 0 ProjScaleAtNatOriginGeoKey (Double,1): 1 End_Of_Keys. End_Of_Geotiff. Projection Method: CT_TransvMercator_SouthOrientated ProjNatOriginLatGeoKey: 0.000000 ( 0d 0' 0.00"N) ProjNatOriginLongGeoKey: 15.000000 ( 15d 0' 0.00"E) ProjScaleAtNatOriginGeoKey: 1.000000 ProjFalseEastingGeoKey: 0.000000 m ProjFalseNorthingGeoKey: 0.000000 m GCS: 4148/Hartebeesthoek94 Datum: 6148/Hartebeesthoek94 Ellipsoid: 7030/WGS 84 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) Lower Left ( 440720.000, 3751260.000) Upper Right ( 440780.000, 3751320.000) Lower Right ( 440780.000, 3751260.000) Center ( 440750.000, 3751290.000) Testing listgeo ProjectedCSTypeGeoKey_3812_lcc2sp.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea ProjectedCSTypeGeoKey (Short,1): Code-3812 (ETRS89 / Belgian Lambert 2008) End_Of_Keys. End_Of_Geotiff. PCS = 3812 (ETRS89 / Belgian Lambert 2008) Projection = 3811 (Belgian Lambert 2008) Projection Method: CT_LambertConfConic_2SP ProjFalseOriginLatGeoKey: 50.797815 ( 50d47'52.13"N) ProjFalseOriginLongGeoKey: 4.359216 ( 4d21'33.18"E) ProjStdParallel1GeoKey: 49.833333 ( 49d50' 0.00"N) ProjStdParallel2GeoKey: 51.166667 ( 51d10' 0.00"N) ProjFalseEastingGeoKey: 649328.000000 m ProjFalseNorthingGeoKey: 665262.000000 m GCS: 4258/ETRS89 Datum: 6258/European Terrestrial Reference System 1989 Ellipsoid: 7019/GRS 1980 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 2d49'38.80"W, 77d 7'27.62"N) Lower Left ( 440720.000, 3751260.000) ( 2d49'38.09"W, 77d 7'25.97"N) Upper Right ( 440780.000, 3751320.000) ( 2d49'31.41"W, 77d 7'27.78"N) Lower Right ( 440780.000, 3751260.000) ( 2d49'30.69"W, 77d 7'26.13"N) Center ( 440750.000, 3751290.000) ( 2d49'34.75"W, 77d 7'26.87"N) Testing listgeo lcc2sp.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,30): "ETRS89 / Belgian Lambert 2008" GeographicTypeGeoKey (Short,1): GCS_EUREF89 GeogCitationGeoKey (Ascii,7): "ETRS89" GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogSemiMajorAxisGeoKey (Double,1): 6378137 GeogInvFlatteningGeoKey (Double,1): 298.257222101 ProjectedCSTypeGeoKey (Short,1): User-Defined ProjectionGeoKey (Short,1): User-Defined ProjCoordTransGeoKey (Short,1): CT_LambertConfConic_2SP ProjLinearUnitsGeoKey (Short,1): Linear_Meter ProjStdParallel1GeoKey (Double,1): 49.8333333333333 ProjStdParallel2GeoKey (Double,1): 51.1666666666667 ProjFalseOriginLongGeoKey (Double,1): 4.35921583333333 ProjFalseOriginLatGeoKey (Double,1): 50.797815 ProjFalseOriginEastingGeoKey (Double,1): 649328 ProjFalseOriginNorthingGeoKey (Double,1): 665262 End_Of_Keys. End_Of_Geotiff. Projection Method: CT_LambertConfConic_2SP ProjFalseOriginLatGeoKey: 50.797815 ( 50d47'52.13"N) ProjFalseOriginLongGeoKey: 4.359216 ( 4d21'33.18"E) ProjStdParallel1GeoKey: 49.833333 ( 49d50' 0.00"N) ProjStdParallel2GeoKey: 51.166667 ( 51d10' 0.00"N) ProjFalseEastingGeoKey: 649328.000000 m ProjFalseNorthingGeoKey: 665262.000000 m GCS: 4258/ETRS89 Datum: 6258/European Terrestrial Reference System 1989 Ellipsoid: 7019/GRS 1980 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 2d49'38.80"W, 77d 7'27.62"N) Lower Left ( 440720.000, 3751260.000) ( 2d49'38.09"W, 77d 7'25.97"N) Upper Right ( 440780.000, 3751320.000) ( 2d49'31.41"W, 77d 7'27.78"N) Lower Right ( 440780.000, 3751260.000) ( 2d49'30.69"W, 77d 7'26.13"N) Center ( 440750.000, 3751290.000) ( 2d49'34.75"W, 77d 7'26.87"N) Testing listgeo ProjectedCSTypeGeoKey_3083_albers_equal_area.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea ProjectedCSTypeGeoKey (Short,1): Code-3083 (NAD83 / Texas Centric Albers Equal Area) End_Of_Keys. End_Of_Geotiff. PCS = 3083 (NAD83 / Texas Centric Albers Equal Area) Projection = 14254 (Texas Centric Albers Equal Area) Projection Method: CT_AlbersEqualArea ProjStdParallel1GeoKey: 27.500000 ( 27d30' 0.00"N) ProjStdParallel2GeoKey: 35.000000 ( 35d 0' 0.00"N) ProjNatOriginLatGeoKey: 18.000000 ( 18d 0' 0.00"N) ProjNatOriginLongGeoKey: -100.000000 (100d 0' 0.00"W) ProjFalseEastingGeoKey: 1500000.000000 m ProjFalseNorthingGeoKey: 6000000.000000 m GCS: 4269/NAD83 Datum: 6269/North American Datum 1983 Ellipsoid: 7019/GRS 1980 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (108d13'30.29"W, 4d19'52.00"S) Lower Left ( 440720.000, 3751260.000) (108d13'30.16"W, 4d19'54.26"S) Upper Right ( 440780.000, 3751320.000) (108d13'28.61"W, 4d19'51.83"S) Lower Right ( 440780.000, 3751260.000) (108d13'28.49"W, 4d19'54.09"S) Center ( 440750.000, 3751290.000) (108d13'29.39"W, 4d19'53.05"S) Testing listgeo albers_equal_area.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,40): "NAD83 / Texas Centric Albers Equal Area" GeographicTypeGeoKey (Short,1): GCS_NAD83 GeogCitationGeoKey (Ascii,6): "NAD83" GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogSemiMajorAxisGeoKey (Double,1): 6378137 GeogInvFlatteningGeoKey (Double,1): 298.257222101 ProjectedCSTypeGeoKey (Short,1): User-Defined ProjectionGeoKey (Short,1): User-Defined ProjCoordTransGeoKey (Short,1): CT_AlbersEqualArea ProjLinearUnitsGeoKey (Short,1): Linear_Meter ProjStdParallel1GeoKey (Double,1): 27.5 ProjStdParallel2GeoKey (Double,1): 35 ProjNatOriginLongGeoKey (Double,1): -100 ProjNatOriginLatGeoKey (Double,1): 18 ProjFalseEastingGeoKey (Double,1): 1500000 ProjFalseNorthingGeoKey (Double,1): 6000000 End_Of_Keys. End_Of_Geotiff. Projection Method: CT_AlbersEqualArea ProjStdParallel1GeoKey: 27.500000 ( 27d30' 0.00"N) ProjStdParallel2GeoKey: 35.000000 ( 35d 0' 0.00"N) ProjNatOriginLatGeoKey: 18.000000 ( 18d 0' 0.00"N) ProjNatOriginLongGeoKey: -100.000000 (100d 0' 0.00"W) ProjFalseEastingGeoKey: 1500000.000000 m ProjFalseNorthingGeoKey: 6000000.000000 m GCS: 4269/NAD83 Datum: 6269/North American Datum 1983 Ellipsoid: 7019/GRS 1980 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (108d13'30.29"W, 4d19'52.00"S) Lower Left ( 440720.000, 3751260.000) (108d13'30.16"W, 4d19'54.26"S) Upper Right ( 440780.000, 3751320.000) (108d13'28.61"W, 4d19'51.83"S) Lower Right ( 440780.000, 3751260.000) (108d13'28.49"W, 4d19'54.09"S) Center ( 440750.000, 3751290.000) (108d13'29.39"W, 4d19'53.05"S) Testing listgeo ProjectedCSTypeGeoKey_3035_lambert_azimuthal_equal_area.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea ProjectedCSTypeGeoKey (Short,1): Code-3035 (ETRS89-extended / LAEA Europe) End_Of_Keys. End_Of_Geotiff. PCS = 3035 (ETRS89-extended / LAEA Europe) Projection = 19986 (Europe Equal Area 2001) Projection Method: CT_LambertAzimEqualArea ProjCenterLatGeoKey: 52.000000 ( 52d 0' 0.00"N) ProjCenterLongGeoKey: 10.000000 ( 10d 0' 0.00"E) ProjFalseEastingGeoKey: 4321000.000000 m ProjFalseNorthingGeoKey: 3210000.000000 m GCS: 4258/ETRS89 Datum: 6258/European Terrestrial Reference System 1989 Ellipsoid: 7019/GRS 1980 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 42d57'55.53"W, 43d35'56.15"N) Lower Left ( 440720.000, 3751260.000) ( 42d57'53.84"W, 43d35'54.75"N) Upper Right ( 440780.000, 3751320.000) ( 42d57'53.38"W, 43d35'57.45"N) Lower Right ( 440780.000, 3751260.000) ( 42d57'51.69"W, 43d35'56.06"N) Center ( 440750.000, 3751290.000) ( 42d57'53.61"W, 43d35'56.10"N) Testing listgeo lambert_azimuthal_equal_area.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,21): "ETRS89 / LAEA Europe" GeographicTypeGeoKey (Short,1): GCS_EUREF89 GeogCitationGeoKey (Ascii,7): "ETRS89" GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogSemiMajorAxisGeoKey (Double,1): 6378137 GeogInvFlatteningGeoKey (Double,1): 298.257222101 ProjectedCSTypeGeoKey (Short,1): User-Defined ProjectionGeoKey (Short,1): User-Defined ProjCoordTransGeoKey (Short,1): CT_LambertAzimEqualArea ProjLinearUnitsGeoKey (Short,1): Linear_Meter ProjFalseEastingGeoKey (Double,1): 4321000 ProjFalseNorthingGeoKey (Double,1): 3210000 ProjCenterLongGeoKey (Double,1): 10 ProjCenterLatGeoKey (Double,1): 52 End_Of_Keys. End_Of_Geotiff. Projection Method: CT_LambertAzimEqualArea ProjCenterLatGeoKey: 52.000000 ( 52d 0' 0.00"N) ProjCenterLongGeoKey: 10.000000 ( 10d 0' 0.00"E) ProjFalseEastingGeoKey: 4321000.000000 m ProjFalseNorthingGeoKey: 3210000.000000 m GCS: 4258/ETRS89 Datum: 6258/European Terrestrial Reference System 1989 Ellipsoid: 7019/GRS 1980 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 42d57'55.53"W, 43d35'56.15"N) Lower Left ( 440720.000, 3751260.000) ( 42d57'53.84"W, 43d35'54.75"N) Upper Right ( 440780.000, 3751320.000) ( 42d57'53.38"W, 43d35'57.45"N) Lower Right ( 440780.000, 3751260.000) ( 42d57'51.69"W, 43d35'56.06"N) Center ( 440750.000, 3751290.000) ( 42d57'53.61"W, 43d35'56.10"N) Testing listgeo ProjectedCSTypeGeoKey_3410_lambert_cylindrical_equal_area.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea ProjectedCSTypeGeoKey (Short,1): Code-3410 (NSIDC EASE-Grid Global) End_Of_Keys. End_Of_Geotiff. PCS = 3410 (NSIDC EASE-Grid Global) Projection = 19869 (US NSIDC Equal Area global projection) Projection Method: CT_CylindricalEqualArea ProjStdParallel1GeoKey: 30.000000 ( 30d 0' 0.00"N) ProjNatOriginLongGeoKey: 0.000000 ( 0d 0' 0.00"E) ProjFalseEastingGeoKey: 0.000000 m ProjFalseNorthingGeoKey: 0.000000 m GCS: 4053/Unspecified datum based upon the International 1924 Authalic Sphere Datum: 6053/Not specified (based on International 1924 Authalic Sphere) Ellipsoid: 7057/International 1924 Authalic Sphere (6371228.00,6371228.00) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 4d34'35.33"E, 30d39'27.66"N) Lower Left ( 440720.000, 3751260.000) ( 4d34'35.33"E, 30d39'25.71"N) Upper Right ( 440780.000, 3751320.000) ( 4d34'37.57"E, 30d39'27.66"N) Lower Right ( 440780.000, 3751260.000) ( 4d34'37.57"E, 30d39'25.71"N) Center ( 440750.000, 3751290.000) ( 4d34'36.45"E, 30d39'26.68"N) Testing listgeo lambert_cylindrical_equal_area.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,23): "NSIDC EASE-Grid Global" GeographicTypeGeoKey (Short,1): Code-4053 (Unspecified datum based upon the International 1924 Authalic Sphere) GeogCitationGeoKey (Ascii,68): "Unspecified datum based upon the International 1924 Authalic Sphere" GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogSemiMajorAxisGeoKey (Double,1): 6371228 ProjectedCSTypeGeoKey (Short,1): User-Defined ProjectionGeoKey (Short,1): User-Defined ProjCoordTransGeoKey (Short,1): CT_CylindricalEqualArea ProjLinearUnitsGeoKey (Short,1): Linear_Meter ProjStdParallel1GeoKey (Double,1): 30 ProjNatOriginLongGeoKey (Double,1): 0 ProjFalseEastingGeoKey (Double,1): 0 ProjFalseNorthingGeoKey (Double,1): 0 End_Of_Keys. End_Of_Geotiff. Projection Method: CT_CylindricalEqualArea ProjStdParallel1GeoKey: 30.000000 ( 30d 0' 0.00"N) ProjNatOriginLongGeoKey: 0.000000 ( 0d 0' 0.00"E) ProjFalseEastingGeoKey: 0.000000 m ProjFalseNorthingGeoKey: 0.000000 m GCS: 4053/Unspecified datum based upon the International 1924 Authalic Sphere Datum: 6053/Not specified (based on International 1924 Authalic Sphere) Ellipsoid: 7057/International 1924 Authalic Sphere (6371228.00,6371228.00) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 4d34'35.33"E, 30d39'27.66"N) Lower Left ( 440720.000, 3751260.000) ( 4d34'35.33"E, 30d39'25.71"N) Upper Right ( 440780.000, 3751320.000) ( 4d34'37.57"E, 30d39'27.66"N) Lower Right ( 440780.000, 3751260.000) ( 4d34'37.57"E, 30d39'25.71"N) Center ( 440750.000, 3751290.000) ( 4d34'36.45"E, 30d39'26.68"N) Testing listgeo ProjectedCSTypeGeoKey_4087_equidistant_cylindrical.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea ProjectedCSTypeGeoKey (Short,1): Code-4087 (WGS 84 / World Equidistant Cylindrical) End_Of_Keys. End_Of_Geotiff. PCS = 4087 (WGS 84 / World Equidistant Cylindrical) Projection = 4085 (World Equidistant Cylindrical) Projection Method: CT_Equirectangular ProjCenterLatGeoKey: 0.000000 ( 0d 0' 0.00"N) ProjCenterLongGeoKey: 0.000000 ( 0d 0' 0.00"E) ProjStdParallel1GeoKey: 0.000000 ( 0d 0' 0.00"N) ProjFalseEastingGeoKey: 0.000000 m ProjFalseNorthingGeoKey: 0.000000 m GCS: 4326/WGS 84 Datum: 6326/World Geodetic System 1984 Ellipsoid: 7030/WGS 84 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 3d57'32.60"E, 33d41'55.25"N) Lower Left ( 440720.000, 3751260.000) ( 3d57'32.60"E, 33d41'53.31"N) Upper Right ( 440780.000, 3751320.000) ( 3d57'34.54"E, 33d41'55.25"N) Lower Right ( 440780.000, 3751260.000) ( 3d57'34.54"E, 33d41'53.31"N) Center ( 440750.000, 3751290.000) ( 3d57'33.57"E, 33d41'54.28"N) Testing listgeo equidistant_cylindrical.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,39): "WGS 84 / World Equidistant Cylindrical" GeographicTypeGeoKey (Short,1): GCS_WGS_84 GeogCitationGeoKey (Ascii,7): "WGS 84" GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogSemiMajorAxisGeoKey (Double,1): 6378137 GeogInvFlatteningGeoKey (Double,1): 298.257223563 ProjectedCSTypeGeoKey (Short,1): User-Defined ProjectionGeoKey (Short,1): User-Defined ProjCoordTransGeoKey (Short,1): CT_Equirectangular ProjLinearUnitsGeoKey (Short,1): Linear_Meter ProjStdParallel1GeoKey (Double,1): 0 ProjFalseEastingGeoKey (Double,1): 0 ProjFalseNorthingGeoKey (Double,1): 0 ProjCenterLongGeoKey (Double,1): 0 ProjCenterLatGeoKey (Double,1): 0 End_Of_Keys. End_Of_Geotiff. Projection Method: CT_Equirectangular ProjCenterLatGeoKey: 0.000000 ( 0d 0' 0.00"N) ProjCenterLongGeoKey: 0.000000 ( 0d 0' 0.00"E) ProjStdParallel1GeoKey: 0.000000 ( 0d 0' 0.00"N) ProjFalseEastingGeoKey: 0.000000 m ProjFalseNorthingGeoKey: 0.000000 m GCS: 4326/WGS 84 Datum: 6326/World Geodetic System 1984 Ellipsoid: 7030/WGS 84 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) ( 3d57'32.60"E, 33d41'55.25"N) Lower Left ( 440720.000, 3751260.000) ( 3d57'32.60"E, 33d41'53.31"N) Upper Right ( 440780.000, 3751320.000) ( 3d57'34.54"E, 33d41'55.25"N) Lower Right ( 440780.000, 3751260.000) ( 3d57'34.54"E, 33d41'53.31"N) Center ( 440750.000, 3751290.000) ( 3d57'33.57"E, 33d41'54.28"N) Testing listgeo pixel_is_point_wgs84.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 -1 53 0 ModelPixelScaleTag (1,3): 2 2 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeGeographic GTRasterTypeGeoKey (Short,1): RasterPixelIsPoint GeographicTypeGeoKey (Short,1): GCS_WGS_84 GeogAngularUnitsGeoKey (Short,1): Angular_Degree End_Of_Keys. End_Of_Geotiff. GCS: 4326/WGS 84 Datum: 6326/World Geodetic System 1984 Ellipsoid: 7030/WGS 84 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: User-Defined (1.000000m) Corner Coordinates: Upper Left ( 2d 0' 0.00"W, 54d 0' 0.00"N) Lower Left ( 2d 0' 0.00"W, 50d 0' 0.00"N) Upper Right ( 2d 0' 0.00"E, 54d 0' 0.00"N) Lower Right ( 2d 0' 0.00"E, 50d 0' 0.00"N) Center ( 0d 0' 0.00"E, 52d 0' 0.00"N) Testing listgeo epsg_27563_only_pcs_code.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 827294.141443773 523985.644431661 0 ModelPixelScaleTag (1,3): 0.500636999995913 0.500637000001734 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,33): "NTF (Paris) / Lambert Sud France" GeogCitationGeoKey (Ascii,12): "NTF (Paris)" GeogAngularUnitsGeoKey (Short,1): Angular_Grad ProjectedCSTypeGeoKey (Short,1): Code-27563 (NTF (Paris) / Lambert Sud France) ProjLinearUnitsGeoKey (Short,1): Linear_Meter End_Of_Keys. End_Of_Geotiff. PCS = 27563 (NTF (Paris) / Lambert Sud France) Projection = 18093 (Lambert Sud France) Projection Method: CT_LambertConfConic_1SP ProjNatOriginLatGeoKey: 44.100000 ( 44d 6' 0.00"N) ProjNatOriginLongGeoKey: 0.000000 ( 0d 0' 0.00"E) ProjScaleAtNatOriginGeoKey: 0.999877 ProjFalseEastingGeoKey: 600000.000000 m ProjFalseNorthingGeoKey: 200000.000000 m GCS: 4807/NTF (Paris) Datum: 6807/Nouvelle Triangulation Francaise (Paris) Ellipsoid: 7011/Clarke 1880 (IGN) (6378249.20,6356515.00) Prime Meridian: 8903/Paris (2.337229/ 2d20'14.03"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 827294.141, 523985.644) ( 2d59' 3.48"E, 46d58'37.71"N) Lower Left ( 827294.141, 523980.638) ( 2d59' 3.47"E, 46d58'37.54"N) Upper Right ( 827299.148, 523985.644) ( 2d59' 3.71"E, 46d58'37.70"N) Lower Right ( 827299.148, 523980.638) ( 2d59' 3.71"E, 46d58'37.54"N) Center ( 827296.645, 523983.141) ( 2d59' 3.59"E, 46d58'37.62"N) Testing listgeo epsg_27563_allgeokeys.tif Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 827294.141443773 523985.644431661 0 ModelPixelScaleTag (1,3): 0.500636999995913 0.500637000001734 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,33): "NTF (Paris) / Lambert Sud France" GeographicTypeGeoKey (Short,1): GCS_NTF_Paris GeogCitationGeoKey (Ascii,12): "NTF (Paris)" GeogGeodeticDatumGeoKey (Short,1): Code-6807 (Nouvelle Triangulation Francaise (Paris)) GeogPrimeMeridianGeoKey (Short,1): PM_Paris GeogAngularUnitsGeoKey (Short,1): Angular_Grad GeogAngularUnitSizeGeoKey (Double,1): 0.0157079632679489 GeogEllipsoidGeoKey (Short,1): Ellipse_Clarke_1880_IGN GeogSemiMajorAxisGeoKey (Double,1): 6378249.2 GeogInvFlatteningGeoKey (Double,1): 293.466021293627 GeogPrimeMeridianLongGeoKey (Double,1): 2.5969213 GeogTOWGS84GeoKey (Double,7): -168 -60 320 0 0 0 0 ProjectedCSTypeGeoKey (Short,1): Code-27563 (NTF (Paris) / Lambert Sud France) PCSCitationGeoKey (Ascii,33): "NTF (Paris) / Lambert Sud France" ProjectionGeoKey (Short,1): Code-18093 (Lambert Sud France) ProjCoordTransGeoKey (Short,1): CT_LambertConfConic_1SP ProjLinearUnitsGeoKey (Short,1): Linear_Meter ProjLinearUnitSizeGeoKey (Double,1): 1 ProjNatOriginLongGeoKey (Double,1): 0 ProjNatOriginLatGeoKey (Double,1): 49 ProjFalseEastingGeoKey (Double,1): 600000 ProjFalseNorthingGeoKey (Double,1): 200000 ProjScaleAtNatOriginGeoKey (Double,1): 0.999877499 VerticalUnitsGeoKey (Short,1): Linear_Meter End_Of_Keys. End_Of_Geotiff. PCS = 27563 (NTF (Paris) / Lambert Sud France) Projection = 18093 (Lambert Sud France) Projection Method: CT_LambertConfConic_1SP ProjNatOriginLatGeoKey: 44.100000 ( 44d 6' 0.00"N) ProjNatOriginLongGeoKey: 0.000000 ( 0d 0' 0.00"E) ProjScaleAtNatOriginGeoKey: 0.999877 ProjFalseEastingGeoKey: 600000.000000 m ProjFalseNorthingGeoKey: 200000.000000 m GCS: 4807/NTF (Paris) Datum: 6807/Nouvelle Triangulation Francaise (Paris) Ellipsoid: 7011/Clarke 1880 (IGN) (6378249.20,6356515.00) Prime Meridian: 8903/Paris (2.337229/ 2d20'14.03"E) TOWGS84: -168,-60,320,0,0,0,0 Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 827294.141, 523985.644) ( 2d59' 3.48"E, 46d58'37.71"N) Lower Left ( 827294.141, 523980.638) ( 2d59' 3.47"E, 46d58'37.54"N) Upper Right ( 827299.148, 523985.644) ( 2d59' 3.71"E, 46d58'37.70"N) Lower Right ( 827299.148, 523980.638) ( 2d59' 3.71"E, 46d58'37.54"N) Center ( 827296.645, 523983.141) ( 2d59' 3.59"E, 46d58'37.62"N) libgeotiff-1.7.4/test/testgeotifcp0000775000175000017500000000427514020740032014165 00000000000000: # Test geotifcp TEST_CLI_DIR=`dirname $0` DATA_DIR=`dirname $0`/data EXE=$1 LISTGEO_EXE=$2 usage() { echo "Usage: ${0} " echo exit 1 } if test -z "${EXE}"; then EXE=../bin/geotifcp LISTGEO_EXE=../bin/listgeo fi if test ! -x ${EXE}; then echo "*** ERROR: Can not find '${EXE}' program!" exit 1 fi if test ! -x ${LISTGEO_EXE}; then echo "*** ERROR: Can not find '${LISTGEO_EXE}' program!" exit 1 fi echo "============================================" echo "Running ${0} using ${EXE}:" echo "============================================" OUT=testgeotifcp_out rm -f ${OUT} $LISTGEO_EXE ${DATA_DIR}/albers_equal_area.tif > tmp_albers_equal_area.txt $EXE -g tmp_albers_equal_area.txt ${DATA_DIR}/byte.tif tmp_albers_equal_area.tif $LISTGEO_EXE tmp_albers_equal_area.tif >> ${OUT} rm -f tmp_albers_equal_area.txt rm -f tmp_albers_equal_area.tif echo "" >> ${OUT} $LISTGEO_EXE ${DATA_DIR}/ProjectedCSTypeGeoKey_3083_albers_equal_area.tif > tmp_ProjectedCSTypeGeoKey_3083_albers_equal_area.txt $EXE -g tmp_ProjectedCSTypeGeoKey_3083_albers_equal_area.txt ${DATA_DIR}/byte.tif tmp_ProjectedCSTypeGeoKey_3083_albers_equal_area.tif $LISTGEO_EXE tmp_ProjectedCSTypeGeoKey_3083_albers_equal_area.tif >> ${OUT} rm -f tmp_ProjectedCSTypeGeoKey_3083_albers_equal_area.txt rm -f tmp_ProjectedCSTypeGeoKey_3083_albers_equal_area.tif echo "" >> ${OUT} # Test copying a GeoTIFF v1.1 file $LISTGEO_EXE ${DATA_DIR}/byte_v11.tif > tmp_byte_v11.txt $EXE -g tmp_byte_v11.txt ${DATA_DIR}/byte.tif tmp_byte_v11.tif $LISTGEO_EXE tmp_byte_v11.tif >> ${OUT} rm -f tmp_byte_v11.txt rm -f tmp_byte_v11.tif echo "" >> ${OUT} # Test changing the version number $EXE -v 1:1:1 ${DATA_DIR}/byte.tif tmp_byte_v11.tif $LISTGEO_EXE tmp_byte_v11.tif >> ${OUT} rm -f tmp_byte_v11.tif echo "" >> ${OUT} # do 'diff' with distribution results echo "diff ${OUT} with testgeotifcp_out.dist" diff -u ${OUT} ${TEST_CLI_DIR}/testgeotifcp_out.dist if [ $? -ne 0 ] ; then echo "" echo "PROBLEMS HAVE OCCURRED" echo "test file ${OUT} saved" echo exit 100 else echo "TEST OK" echo "test file ${OUT} removed" echo /bin/rm -f ${OUT} exit 0 fi libgeotiff-1.7.4/test/data/0000775000175000017500000000000014755113374012542 500000000000000libgeotiff-1.7.4/test/data/cassini_soldner.tif0000664000175000017500000000112314020740032016320 00000000000000II*RSƒ ΂„ 毇T°‡ ¾±‡\öN@N@@æAÌžLA±‡ÿ±‡SÿŽ#ÿ °‡ °‡ °‡ ÿ ÿ  )# °‡ °‡ °‡ °‡{Çí»?@D¥t%›A@ ×£p\ÈA•C‹>ùþ@Ûù~2ÏTXA–XHvWr@unnamed|GCS Name = unnamed ellipse|Datum = unknown|Ellipsoid = unnamed|Primem = Greenwich||klibgeotiff-1.7.4/test/data/polyconic.tif0000664000175000017500000000077714020740032015156 00000000000000II*þSƒ ΂„ 毇H°‡ ¦±‡ ÞN@N@@æAÌžLA±‡ ±‡Ž# °‡ °‡ ÿ ÿ  )# °‡ °‡ °‡ °‡ °‡KÀð?ÐSAÐcA¤r@¬TXASAD69 / Brazil Polyconic|SAD69|klibgeotiff-1.7.4/test/data/mercator2sp.tif0000664000175000017500000000101214020740032015377 00000000000000II* Sƒ ΂„ 毇H°‡ ¦±‡+ÞN@N@@æAÌžLA±‡B±‡ Ž# °‡ °‡ ÿ ÿ  )# °‡ °‡ °‡ °‡ °‡€EÀÀÐSAÐcA¨ù딤r@@¦TXASIRGAS 2000 / Brazil Mercator|SIRGAS 2000|klibgeotiff-1.7.4/test/data/ProjectedCSTypeGeoKey_5329_mercator1sp.tif0000664000175000017500000000044014020740032022257 00000000000000II* kSƒ è‚„ ¸¯‡@æAÌžLAN@N@ Ñlibgeotiff-1.7.4/test/data/ProjectedCSTypeGeoKey_5456_lcc1sp.tif0000664000175000017500000000044014020740032021205 00000000000000II* kSƒ è‚„ ¸¯‡@æAÌžLAN@N@ Plibgeotiff-1.7.4/test/data/ProjectedCSTypeGeoKey_8065_hotine_oblique_mercator_variant_b.tif0000664000175000017500000000044014020740032026746 00000000000000II* kSƒ è‚„ ¸¯‡@æAÌžLAN@N@ libgeotiff-1.7.4/test/data/oblique_stereographic.tif0000664000175000017500000000103214020740032017517 00000000000000II*Sƒ ΂„ 毇L°‡ ®±‡3æN@N@@æAÌžLA±‡,«±‡,Ž# °‡ °‡ó  ÿ ÿ  *# °‡ °‡ °‡ °‡ °‡@G@ PÀ/\sGÿï?€„.A€„.A‡Uu¿¨or@š™™™·TXANAD27 / New Brunswick Stereographic (NAD27)|NAD27|klibgeotiff-1.7.4/test/data/pcs_32064.tif0000664000175000017500000000055114020740032014470 00000000000000II*hSƒ ‚„ Ú¯‡ ±‡JN@N@@æAÌžLA±‡±‡Ž# @} +#NAD27 / BLM 14N (ftUS)|NAD27|klibgeotiff-1.7.4/test/data/ProjLinearUnitsGeoKey_9036.tif0000664000175000017500000000055214020740032020023 00000000000000II* kSƒ ô‚„ į‡ ±‡L@æAÌžLAN@N@±‡±‡Ž# @} L#NAD27 / BLM 14N (ftUS)|NAD27|libgeotiff-1.7.4/test/data/GeogGeodeticDatumGeoKey.tif0000664000175000017500000000047014020740032017571 00000000000000II* kSƒ è‚„ ¸¯‡@`@@@ð?ð?ÿV)#Ž#libgeotiff-1.7.4/test/data/polar_stereographic_variant_b.tif0000664000175000017500000000103114020740032021220 00000000000000II*Sƒ ΂„ 毇H°‡ ¦±‡:ÞN@N@@æAÌžLA±‡2汇2Ž# °‡ °‡ ÿ ÿ  )# °‡ °‡ °‡ °‡ °‡ÀQÀ€Q@ð?`ãVA`ãVAˆmt–¤r@@¦TXAWGS 84 / Australian Antarctic Polar Stereographic|WGS 84|klibgeotiff-1.7.4/test/data/lambert_cylindrical_equal_area.tif0000664000175000017500000000103314020740032021323 00000000000000II*Sƒ ΂„ 毇@°‡ –±‡\¾N@N@@æAÌžLA±‡Õ±‡DŽ# °‡ ÿ ÿ  )# °‡ °‡ °‡ °‡>@çMXANSIDC EASE-Grid Global|Unspecified datum based upon the International 1924 Authalic Sphere|klibgeotiff-1.7.4/test/data/GeogAngularUnitsGeoKey_9114.tif0000664000175000017500000000047014020740032020145 00000000000000II* kSƒ è‚„ ¸¯‡@`@@@ð?ð?ÿV)#š#libgeotiff-1.7.4/test/data/equidistant_cylindrical.tif0000664000175000017500000000101614020740032020051 00000000000000II* Sƒ ΂„ 毇H°‡ ¦±‡/ÞN@N@@æAÌžLA±‡'汇'Ž# °‡ °‡ ÿ ÿ  )# °‡ °‡ °‡ °‡ °‡ˆmt–¤r@@¦TXAWGS 84 / World Equidistant Cylindrical|WGS 84|klibgeotiff-1.7.4/test/data/lcc2sp.tif0000664000175000017500000000102514020740032014330 00000000000000II*Sƒ ΂„ 毇L°‡ ®±‡&îN@N@@æAÌžLA±‡¢±‡Ž# °‡ °‡ ÿ ÿ  )# °‡ °‡ °‡ °‡ °‡ °‡¡JÍfI@ø|FÖo@¦ªªªªêH@ZUUUU•I@àÐ#A\M$A¨ù딤r@@¦TXAETRS89 / Belgian Lambert 2008|ETRS89|klibgeotiff-1.7.4/test/data/ProjectedCSTypeGeoKey_27200_new_zealand_mapping_grid.tif0000664000175000017500000000044014020740032025076 00000000000000II* kSƒ è‚„ ¸¯‡@æAÌžLAN@N@ @jlibgeotiff-1.7.4/test/data/byte_v11.tif0000664000175000017500000000134014020740032014574 00000000000000II*˜k{„s„„Œ„„„k„k„„k{sœ”s„k{”s¥sŒk{{c„{„„„cœs„Œ„{sŒkŒs„{k„„ssksk”„{{s„„{s{s{ks”ksŒs„„œ„Œ„„sss{”{¥{„kk„œ{½­­””s”{k„s„œc{s„„ÎkÅ­”ŒŒ„c„{sŒ„„c„{„­{s”{”s”{Œ{ks„sksc{cµck{s„s{„s„„{{„csc{„sskŒŒcŒcs{k„ksks{„{k{„„„„„{c„{k”cs{Œ­{k{{{k{{{kŒ{{ssZk­kkkkc„{s­”c{{k{ck½­ksskcŒk­Œ”„„k{ccsc„cŒs”{c„{”ŒŒkŒZkskZc{sss{{”s”c„¥”œ{kkksŒcsccks„sZ{s½­ŒŒ¥s„ZcsZcckc„ck„„œµŒ­{„cs{Jsc{Œœ„¥ŒŒc­÷ÿ΄kŒ{”„¥¥”Œ„{k{k{µµœ”œœœµ„”s„kkkkksckSƒ R‚„ j¯‡š±‡ÊN@N@@æAÌžLA±‡ Wh )#NAD27 / UTM zone 11N|libgeotiff-1.7.4/test/data/ProjectedCSTypeGeoKey_5641_mercator2sp.tif0000664000175000017500000000044014020740032022255 00000000000000II* kSƒ è‚„ ¸¯‡@æAÌžLAN@N@  libgeotiff-1.7.4/test/data/byte.tif0000664000175000017500000000134014020740032014105 00000000000000II*˜k{„s„„Œ„„„k„k„„k{sœ”s„k{”s¥sŒk{{c„{„„„cœs„Œ„{sŒkŒs„{k„„ssksk”„{{s„„{s{s{ks”ksŒs„„œ„Œ„„sss{”{¥{„kk„œ{½­­””s”{k„s„œc{s„„ÎkÅ­”ŒŒ„c„{sŒ„„c„{„­{s”{”s”{Œ{ks„sksc{cµck{s„s{„s„„{{„csc{„sskŒŒcŒcs{k„ksks{„{k{„„„„„{c„{k”cs{Œ­{k{{{k{{{kŒ{{ssZk­kkkkc„{s­”c{{k{ck½­ksskcŒk­Œ”„„k{ccsc„cŒs”{c„{”ŒŒkŒZkskZc{sss{{”s”c„¥”œ{kkksŒcsccks„sZ{s½­ŒŒ¥s„ZcsZcckc„ck„„œµŒ­{„cs{Jsc{Œœ„¥ŒŒc­÷ÿ΄kŒ{”„¥¥”Œ„{k{k{µµœ”œœœµ„”s„kkkkksckSƒ R‚„ j¯‡š±‡ÊN@N@@æAÌžLA±‡ Wh )#NAD27 / UTM zone 11N|libgeotiff-1.7.4/test/data/ProjectedCSTypeGeoKey_4087_equidistant_cylindrical.tif0000664000175000017500000000044014020740032024726 00000000000000II* kSƒ è‚„ ¸¯‡@æAÌžLAN@N@ ÷libgeotiff-1.7.4/test/data/epsg_27563_only_pcs_code.tif0000664000175000017500000000163414632634101017564 00000000000000II*  Îp ,SÔƒ º‚„ Ò¯‡ ±‡.B€¤àÚ metre metre metre ÍÌÄâ7à?š™Åâ7à?sQkH&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = test ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/m4/ax_prog_doxygen.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/geo_config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_DX_CURRENT_FEATURE = @DX_FLAG_DX_CURRENT_FEATURE@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ JPEG_INC = @JPEG_INC@ JPEG_PREFIX = @JPEG_PREFIX@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBGEOTIFF_MAJOR_VERSION = @LIBGEOTIFF_MAJOR_VERSION@ LIBGEOTIFF_MINOR_VERSION = @LIBGEOTIFF_MINOR_VERSION@ LIBGEOTIFF_PATCH_VERSION = @LIBGEOTIFF_PATCH_VERSION@ LIBGEOTIFF_REV_VERSION = @LIBGEOTIFF_REV_VERSION@ LIBGEOTIFF_STRING_VERSION = @LIBGEOTIFF_STRING_VERSION@ LIBGEOTIFF_VERSION = @LIBGEOTIFF_VERSION@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTIFF_CFLAGS = @LIBTIFF_CFLAGS@ LIBTIFF_LIBS = @LIBTIFF_LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ NOUNDEFINED = @NOUNDEFINED@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ PROJ_CFLAGS = @PROJ_CFLAGS@ PROJ_INCLUDE = @PROJ_INCLUDE@ PROJ_LIBS = @PROJ_LIBS@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ TIFF_INC = @TIFF_INC@ TIFF_PREFIX = @TIFF_PREFIX@ VERSION = @VERSION@ ZIP_INC = @ZIP_INC@ ZIP_PREFIX = @ZIP_PREFIX@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ # Executables paths passed to test scripts THIS_DIR = $(top_srcdir)/test EXEPATH = ../bin LISTGEOEXE = $(EXEPATH)/listgeo GEOTIFCPEXE = $(EXEPATH)/geotifcp # Test scripts TESTLISTGEO = $(THIS_DIR)/testlistgeo TESTGEOTIFCP = $(THIS_DIR)/testgeotifcp EXTRA_DIST = testlistgeo testlistgeo_out.dist \ testgeotifcp testgeotifcp_out.dist \ data/byte.tif \ data/byte_v11.tif \ data/pcs_32064.tif \ data/GeogPrimeMeridianGeoKey.tif \ data/GeogGeodeticDatumGeoKey.tif \ data/GeogAngularUnitsGeoKey_9114.tif \ data/ProjLinearUnitsGeoKey_9036.tif \ data/ProjectedCSTypeGeoKey_28191_cassini_soldner.tif \ data/cassini_soldner.tif \ data/ProjectedCSTypeGeoKey_27200_new_zealand_mapping_grid.tif \ data/new_zealand_mapping_grid.tif \ data/ProjectedCSTypeGeoKey_29101_polyconic.tif \ data/polyconic.tif \ data/ProjectedCSTypeGeoKey_6808_hotine_oblique_mercator_variant_a.tif \ data/hotine_oblique_mercator_variant_a.tif \ data/ProjectedCSTypeGeoKey_8065_hotine_oblique_mercator_variant_b.tif \ data/hotine_oblique_mercator_variant_b.tif \ data/ProjectedCSTypeGeoKey_8441_oblique_mercator_laborde.tif \ data/oblique_mercator_laborde.tif \ data/ProjectedCSTypeGeoKey_5456_lcc1sp.tif \ data/lcc1sp.tif \ data/ProjectedCSTypeGeoKey_5329_mercator1sp.tif \ data/mercator1sp.tif \ data/ProjectedCSTypeGeoKey_5641_mercator2sp.tif \ data/mercator2sp.tif \ data/ProjectedCSTypeGeoKey_5588_oblique_stereographic.tif \ data/oblique_stereographic.tif \ data/ProjectedCSTypeGeoKey_5482_polar_stereographic_variant_a.tif \ data/polar_stereographic_variant_a.tif \ data/ProjectedCSTypeGeoKey_3032_polar_stereographic_variant_b.tif \ data/polar_stereographic_variant_b.tif \ data/ProjectedCSTypeGeoKey_3814_transverse_mercator.tif \ data/transverse_mercator.tif \ data/ProjectedCSTypeGeoKey_2046_transverse_mercator_south_oriented.tif \ data/transverse_mercator_south_oriented.tif \ data/ProjectedCSTypeGeoKey_3812_lcc2sp.tif \ data/lcc2sp.tif \ data/ProjectedCSTypeGeoKey_3083_albers_equal_area.tif \ data/albers_equal_area.tif \ data/ProjectedCSTypeGeoKey_3035_lambert_azimuthal_equal_area.tif \ data/lambert_azimuthal_equal_area.tif \ data/ProjectedCSTypeGeoKey_3410_lambert_cylindrical_equal_area.tif \ data/lambert_cylindrical_equal_area.tif \ data/ProjectedCSTypeGeoKey_4087_equidistant_cylindrical.tif \ data/equidistant_cylindrical.tif \ data/pixel_is_point_wgs84.tif \ data/epsg_27563_only_pcs_code.tif \ data/epsg_27563_allgeokeys.tif all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu test/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu test/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-local check: check-am all-am: Makefile installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: .MAKE: check-am install-am install-strip .PHONY: all all-am check check-am check-local clean clean-generic \ clean-libtool cscopelist-am ctags-am distclean \ distclean-generic distclean-libtool distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \ uninstall-am .PRECIOUS: Makefile check-local: $(TESTLISTGEO) $(LISTGEOEXE) $(TESTGEOTIFCP) $(GEOTIFCPEXE) $(LISTGEOEXE) # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: libgeotiff-1.7.4/test/testgeotifcp_out.dist0000664000175000017500000001626514020740032016015 00000000000000Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,40): "NAD83 / Texas Centric Albers Equal Area" GeographicTypeGeoKey (Short,1): GCS_NAD83 GeogCitationGeoKey (Ascii,6): "NAD83" GeogAngularUnitsGeoKey (Short,1): Angular_Degree GeogSemiMajorAxisGeoKey (Double,1): 6378137 GeogInvFlatteningGeoKey (Double,1): 298.257222101 ProjectedCSTypeGeoKey (Short,1): User-Defined ProjectionGeoKey (Short,1): User-Defined ProjCoordTransGeoKey (Short,1): CT_AlbersEqualArea ProjLinearUnitsGeoKey (Short,1): Linear_Meter ProjStdParallel1GeoKey (Double,1): 27.5 ProjStdParallel2GeoKey (Double,1): 35 ProjNatOriginLongGeoKey (Double,1): -100 ProjNatOriginLatGeoKey (Double,1): 18 ProjFalseEastingGeoKey (Double,1): 1500000 ProjFalseNorthingGeoKey (Double,1): 6000000 End_Of_Keys. End_Of_Geotiff. Projection Method: CT_AlbersEqualArea ProjStdParallel1GeoKey: 27.500000 ( 27d30' 0.00"N) ProjStdParallel2GeoKey: 35.000000 ( 35d 0' 0.00"N) ProjNatOriginLatGeoKey: 18.000000 ( 18d 0' 0.00"N) ProjNatOriginLongGeoKey: -100.000000 (100d 0' 0.00"W) ProjFalseEastingGeoKey: 1500000.000000 m ProjFalseNorthingGeoKey: 6000000.000000 m GCS: 4269/NAD83 Datum: 6269/North American Datum 1983 Ellipsoid: 7019/GRS 1980 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (108d13'30.29"W, 4d19'52.00"S) Lower Left ( 440720.000, 3750120.000) (108d13'27.80"W, 4d20'37.24"S) Upper Right ( 441920.000, 3751320.000) (108d12'56.86"W, 4d19'48.63"S) Lower Right ( 441920.000, 3750120.000) (108d12'54.38"W, 4d20'33.88"S) Center ( 441320.000, 3750720.000) (108d13'12.33"W, 4d20'12.94"S) Geotiff_Information: Version: 1 Key_Revision: 1.0 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea ProjectedCSTypeGeoKey (Short,1): Code-3083 (NAD83 / Texas Centric Albers Equal Area) End_Of_Keys. End_Of_Geotiff. PCS = 3083 (NAD83 / Texas Centric Albers Equal Area) Projection = 14254 (Texas Centric Albers Equal Area) Projection Method: CT_AlbersEqualArea ProjStdParallel1GeoKey: 27.500000 ( 27d30' 0.00"N) ProjStdParallel2GeoKey: 35.000000 ( 35d 0' 0.00"N) ProjNatOriginLatGeoKey: 18.000000 ( 18d 0' 0.00"N) ProjNatOriginLongGeoKey: -100.000000 (100d 0' 0.00"W) ProjFalseEastingGeoKey: 1500000.000000 m ProjFalseNorthingGeoKey: 6000000.000000 m GCS: 4269/NAD83 Datum: 6269/North American Datum 1983 Ellipsoid: 7019/GRS 1980 (6378137.00,6356752.31) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (108d13'30.29"W, 4d19'52.00"S) Lower Left ( 440720.000, 3750120.000) (108d13'27.80"W, 4d20'37.24"S) Upper Right ( 441920.000, 3751320.000) (108d12'56.86"W, 4d19'48.63"S) Lower Right ( 441920.000, 3750120.000) (108d12'54.38"W, 4d20'33.88"S) Center ( 441320.000, 3750720.000) (108d13'12.33"W, 4d20'12.94"S) Geotiff_Information: Version: 1 Key_Revision: 1.1 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,21): "NAD27 / UTM zone 11N" ProjectedCRSGeoKey (Short,1): Code-26711 (NAD27 / UTM zone 11N) ProjLinearUnitsGeoKey (Short,1): Code-9001 (metre) End_Of_Keys. End_Of_Geotiff. PCS = 26711 (NAD27 / UTM zone 11N) Projection = 16011 (UTM zone 11N) Projection Method: CT_TransverseMercator ProjNatOriginLatGeoKey: 0.000000 ( 0d 0' 0.00"N) ProjNatOriginLongGeoKey: -117.000000 (117d 0' 0.00"W) ProjScaleAtNatOriginGeoKey: 0.999600 ProjFalseEastingGeoKey: 500000.000000 m ProjFalseNorthingGeoKey: 0.000000 m GCS: 4267/NAD27 Datum: 6267/North American Datum 1927 Ellipsoid: 7008/Clarke 1866 (6378206.40,6356583.80) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (117d38'28.21"W, 33d54' 8.47"N) Lower Left ( 440720.000, 3750120.000) (117d38'27.92"W, 33d53'29.51"N) Upper Right ( 441920.000, 3751320.000) (117d37'41.48"W, 33d54' 8.71"N) Lower Right ( 441920.000, 3750120.000) (117d37'41.20"W, 33d53'29.75"N) Center ( 441320.000, 3750720.000) (117d38' 4.70"W, 33d53'49.11"N) Geotiff_Information: Version: 1 Key_Revision: 1.1 Tagged_Information: ModelTiepointTag (2,3): 0 0 0 440720 3751320 0 ModelPixelScaleTag (1,3): 60 60 0 End_Of_Tags. Keyed_Information: GTModelTypeGeoKey (Short,1): ModelTypeProjected GTRasterTypeGeoKey (Short,1): RasterPixelIsArea GTCitationGeoKey (Ascii,21): "NAD27 / UTM zone 11N" ProjectedCRSGeoKey (Short,1): Code-26711 (NAD27 / UTM zone 11N) ProjLinearUnitsGeoKey (Short,1): Code-9001 (metre) End_Of_Keys. End_Of_Geotiff. PCS = 26711 (NAD27 / UTM zone 11N) Projection = 16011 (UTM zone 11N) Projection Method: CT_TransverseMercator ProjNatOriginLatGeoKey: 0.000000 ( 0d 0' 0.00"N) ProjNatOriginLongGeoKey: -117.000000 (117d 0' 0.00"W) ProjScaleAtNatOriginGeoKey: 0.999600 ProjFalseEastingGeoKey: 500000.000000 m ProjFalseNorthingGeoKey: 0.000000 m GCS: 4267/NAD27 Datum: 6267/North American Datum 1927 Ellipsoid: 7008/Clarke 1866 (6378206.40,6356583.80) Prime Meridian: 8901/Greenwich (0.000000/ 0d 0' 0.00"E) Projection Linear Units: 9001/metre (1.000000m) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (117d38'28.21"W, 33d54' 8.47"N) Lower Left ( 440720.000, 3750120.000) (117d38'27.92"W, 33d53'29.51"N) Upper Right ( 441920.000, 3751320.000) (117d37'41.48"W, 33d54' 8.71"N) Lower Right ( 441920.000, 3750120.000) (117d37'41.20"W, 33d53'29.75"N) Center ( 441320.000, 3750720.000) (117d38' 4.70"W, 33d53'49.11"N) libgeotiff-1.7.4/geo_tiffp.c0000664000175000017500000000756114622755317012713 00000000000000/********************************************************************** * * geo_tiffp.c Private TIFF interface module for GEOTIFF * * This module implements the interface between the GEOTIFF * tag parser and the TIFF i/o module. The current setup * relies on the "libtiff" code, but if you use your own * TIFF reader software, you may replace the module implementations * here with your own calls. No "libtiff" dependencies occur * anywhere else in this code. * * copyright (c) 1995 Niles D. Ritter * * Permission granted to use this software, so long as this copyright * notice accompanies any products derived therefrom. * **********************************************************************/ #include "geotiff.h" /* public GTIFF interface */ #include "geo_tiffp.h" /* Private TIFF interface */ #include "geo_keyp.h" /* Private GTIFF interface */ /* tiff size array global */ gsize_t _gtiff_size[] = { 0, 1, 2, 4, 8, 1, 4, 8, 1, 2, 4, 1 }; static int _GTIFGetField (tiff_t *tif, pinfo_t tag, int *count, void *value ); static int _GTIFSetField (tiff_t *tif, pinfo_t tag, int count, void *value ); static tagtype_t _GTIFTagType (tiff_t *tif, pinfo_t tag); /* * Set up default TIFF handlers. */ void _GTIFSetDefaultTIFF(TIFFMethod *method) { if (!method) return; method->get = _GTIFGetField; method->set = _GTIFSetField; method->type = _GTIFTagType; } gdata_t _GTIFcalloc(gsize_t size) { gdata_t data=(gdata_t)_TIFFmalloc((tsize_t)size); if (data) _TIFFmemset((tdata_t)data,0,(tsize_t)size); return data; } gdata_t _GTIFrealloc(gdata_t ptr, gsize_t size) { return _TIFFrealloc((tdata_t)ptr, (tsize_t) size); } void _GTIFmemcpy(gdata_t out,gdata_t in,gsize_t size) { _TIFFmemcpy((tdata_t)out,(tdata_t)in,(tsize_t)size); } void _GTIFFree(gdata_t data) { if (data) _TIFFfree((tdata_t)data); } /* returns the value of TIFF tag , or if * the value is an array, returns an allocated buffer * containing the values. Allocate a copy of the actual * buffer, sized up for updating. */ static int _GTIFGetField (tiff_t *tif, pinfo_t tag, int *count, void *val ) { int status; unsigned short scount=0; char *tmp; const gsize_t size = _gtiff_size[_GTIFTagType (tif,tag)]; if (_GTIFTagType(tif, tag) == TYPE_ASCII) { status = TIFFGetField((TIFF *)tif,tag,&tmp); if (!status) return status; scount = (unsigned short) (strlen(tmp)+1); } else status = TIFFGetField((TIFF *)tif,tag,&scount,&tmp); if (!status) return status; *count = scount; char *value = (char *)_GTIFcalloc( (scount+MAX_VALUES)*size); if (!value) return 0; _TIFFmemcpy( value, tmp, size * scount); *(char **)val = value; return status; } /* * Set a GeoTIFF TIFF field. */ static int _GTIFSetField (tiff_t *tif, pinfo_t tag, int count, void *value ) { const unsigned short scount = (unsigned short) count; int status; /* libtiff ASCII uses null-delimiter */ if (_GTIFTagType(tif, tag) == TYPE_ASCII) status = TIFFSetField((TIFF *)tif,tag,value); else status = TIFFSetField((TIFF *)tif,tag,scount,value); return status; } /* * This routine is supposed to return the TagType of the * TIFF tag. Unfortunately, "libtiff" does not provide this * service by default, so we just have to "know" what type of tags * we've got, and how many. We only define the ones Geotiff * uses here, and others return UNKNOWN. The "tif" parameter * is provided for those TIFF implementations that provide * for tag-type queries. */ static tagtype_t _GTIFTagType (tiff_t *tif, pinfo_t tag) { (void) tif; /* dummy reference */ tagtype_t ttype; switch (tag) { case GTIFF_ASCIIPARAMS: ttype=TYPE_ASCII; break; case GTIFF_PIXELSCALE: case GTIFF_TRANSMATRIX: case GTIFF_TIEPOINTS: case GTIFF_DOUBLEPARAMS: ttype=TYPE_DOUBLE; break; case GTIFF_GEOKEYDIRECTORY: ttype=TYPE_SHORT; break; default: ttype = TYPE_UNKNOWN; } return ttype; } libgeotiff-1.7.4/LICENSE0000664000175000017500000000706214622755317011606 00000000000000 libgeotiff Licensing ==================== All the source code in this toolkit are either in the public domain, or under the MIT License. In any event it is all considered to be free to use for any purpose (including commercial software). No credit is required though some of the code requires that the specific source code modules retain their existing copyright statements. In particular, no part of this code is "copyleft", nor does it imply any requirement for users to disclose this or their own source code. All components not carrying their own copyright message, but distributed with libgeotiff should be considered to be under the same license as Niles' code. --------- Code by Frank Warmerdam has this copyright notice (directly copied from X Consortium licence): * Copyright (c) 1999, Frank Warmerdam * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. ----------- Code by Niles Ritter is under this licence: * Written By: Niles D. Ritter. * * copyright (c) 1995 Niles D. Ritter * * Permission granted to use this software, so long as this copyright * notice accompanies any products derived therefrom. ---------- The cmake/*.cmake macros are under the following BSD license. This does not affect produced binaries or the library. -- Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. libgeotiff-1.7.4/compile0000755000175000017500000001632714755113347012157 00000000000000#! /bin/sh # Wrapper for compilers which do not understand '-c -o'. scriptversion=2018-03-07.03; # UTC # Copyright (C) 1999-2018 Free Software Foundation, Inc. # Written by Tom Tromey . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # This file is maintained in Automake, please report # bugs to or send patches to # . nl=' ' # We need space, tab and new line, in precisely that order. Quoting is # there to prevent tools from complaining about whitespace usage. IFS=" "" $nl" file_conv= # func_file_conv build_file lazy # Convert a $build file to $host form and store it in $file # Currently only supports Windows hosts. If the determined conversion # type is listed in (the comma separated) LAZY, no conversion will # take place. func_file_conv () { file=$1 case $file in / | /[!/]*) # absolute file, and not a UNC file if test -z "$file_conv"; then # lazily determine how to convert abs files case `uname -s` in MINGW*) file_conv=mingw ;; CYGWIN*) file_conv=cygwin ;; *) file_conv=wine ;; esac fi case $file_conv/,$2, in *,$file_conv,*) ;; mingw/*) file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` ;; cygwin/*) file=`cygpath -m "$file" || echo "$file"` ;; wine/*) file=`winepath -w "$file" || echo "$file"` ;; esac ;; esac } # func_cl_dashL linkdir # Make cl look for libraries in LINKDIR func_cl_dashL () { func_file_conv "$1" if test -z "$lib_path"; then lib_path=$file else lib_path="$lib_path;$file" fi linker_opts="$linker_opts -LIBPATH:$file" } # func_cl_dashl library # Do a library search-path lookup for cl func_cl_dashl () { lib=$1 found=no save_IFS=$IFS IFS=';' for dir in $lib_path $LIB do IFS=$save_IFS if $shared && test -f "$dir/$lib.dll.lib"; then found=yes lib=$dir/$lib.dll.lib break fi if test -f "$dir/$lib.lib"; then found=yes lib=$dir/$lib.lib break fi if test -f "$dir/lib$lib.a"; then found=yes lib=$dir/lib$lib.a break fi done IFS=$save_IFS if test "$found" != yes; then lib=$lib.lib fi } # func_cl_wrapper cl arg... # Adjust compile command to suit cl func_cl_wrapper () { # Assume a capable shell lib_path= shared=: linker_opts= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as 'compile cc -o foo foo.c'. eat=1 case $2 in *.o | *.[oO][bB][jJ]) func_file_conv "$2" set x "$@" -Fo"$file" shift ;; *) func_file_conv "$2" set x "$@" -Fe"$file" shift ;; esac ;; -I) eat=1 func_file_conv "$2" mingw set x "$@" -I"$file" shift ;; -I*) func_file_conv "${1#-I}" mingw set x "$@" -I"$file" shift ;; -l) eat=1 func_cl_dashl "$2" set x "$@" "$lib" shift ;; -l*) func_cl_dashl "${1#-l}" set x "$@" "$lib" shift ;; -L) eat=1 func_cl_dashL "$2" ;; -L*) func_cl_dashL "${1#-L}" ;; -static) shared=false ;; -Wl,*) arg=${1#-Wl,} save_ifs="$IFS"; IFS=',' for flag in $arg; do IFS="$save_ifs" linker_opts="$linker_opts $flag" done IFS="$save_ifs" ;; -Xlinker) eat=1 linker_opts="$linker_opts $2" ;; -*) set x "$@" "$1" shift ;; *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) func_file_conv "$1" set x "$@" -Tp"$file" shift ;; *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) func_file_conv "$1" mingw set x "$@" "$file" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -n "$linker_opts"; then linker_opts="-link$linker_opts" fi exec "$@" $linker_opts exit 1 } eat= case $1 in '') echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: compile [--help] [--version] PROGRAM [ARGS] Wrapper for compilers which do not understand '-c -o'. Remove '-o dest.o' from ARGS, run PROGRAM with the remaining arguments, and rename the output as expected. If you are trying to build a whole package this is not the right script to run: please start by reading the file 'INSTALL'. Report bugs to . EOF exit $? ;; -v | --v*) echo "compile $scriptversion" exit $? ;; cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \ icl | *[/\\]icl | icl.exe | *[/\\]icl.exe ) func_cl_wrapper "$@" # Doesn't return... ;; esac ofile= cfile= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as 'compile cc -o foo foo.c'. # So we strip '-o arg' only if arg is an object. eat=1 case $2 in *.o | *.obj) ofile=$2 ;; *) set x "$@" -o "$2" shift ;; esac ;; *.c) cfile=$1 set x "$@" "$1" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -z "$ofile" || test -z "$cfile"; then # If no '-o' option was seen then we might have been invoked from a # pattern rule where we don't need one. That is ok -- this is a # normal compilation that the losing compiler can handle. If no # '.c' file was seen then we are probably linking. That is also # ok. exec "$@" fi # Name of file we expect compiler to create. cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` # Create the lock directory. # Note: use '[/\\:.-]' here to ensure that we don't use the same name # that we are using for the .o file. Also, base the name on the expected # object file name, since that is what matters with a parallel build. lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d while true; do if mkdir "$lockdir" >/dev/null 2>&1; then break fi sleep 1 done # FIXME: race condition here if user kills between mkdir and trap. trap "rmdir '$lockdir'; exit 1" 1 2 15 # Run the compile. "$@" ret=$? if test -f "$cofile"; then test "$cofile" = "$ofile" || mv "$cofile" "$ofile" elif test -f "${cofile}bj"; then test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" fi rmdir "$lockdir" exit $ret # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: libgeotiff-1.7.4/missing0000755000175000017500000001533614755113347012177 00000000000000#! /bin/sh # Common wrapper for a few potentially missing GNU programs. scriptversion=2018-03-07.03; # UTC # Copyright (C) 1996-2018 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try '$0 --help' for more information" exit 1 fi case $1 in --is-lightweight) # Used by our autoconf macros to check whether the available missing # script is modern enough. exit 0 ;; --run) # Back-compat with the calling convention used by older automake. shift ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit Supported PROGRAM values: aclocal autoconf autoheader autom4te automake makeinfo bison yacc flex lex help2man Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and 'g' are ignored when checking the name. Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: unknown '$1' option" echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac # Run the given program, remember its exit status. "$@"; st=$? # If it succeeded, we are done. test $st -eq 0 && exit 0 # Also exit now if we it failed (or wasn't found), and '--version' was # passed; such an option is passed most likely to detect whether the # program is present and works. case $2 in --version|--help) exit $st;; esac # Exit code 63 means version mismatch. This often happens when the user # tries to use an ancient version of a tool on a file that requires a # minimum version. if test $st -eq 63; then msg="probably too old" elif test $st -eq 127; then # Program was missing. msg="missing on your system" else # Program was found and executed, but failed. Give up. exit $st fi perl_URL=https://www.perl.org/ flex_URL=https://github.com/westes/flex gnu_software_URL=https://www.gnu.org/software program_details () { case $1 in aclocal|automake) echo "The '$1' program is part of the GNU Automake package:" echo "<$gnu_software_URL/automake>" echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/autoconf>" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; autoconf|autom4te|autoheader) echo "The '$1' program is part of the GNU Autoconf package:" echo "<$gnu_software_URL/autoconf/>" echo "It also requires GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; esac } give_advice () { # Normalize program name to check for. normalized_program=`echo "$1" | sed ' s/^gnu-//; t s/^gnu//; t s/^g//; t'` printf '%s\n' "'$1' is $msg." configure_deps="'configure.ac' or m4 files included by 'configure.ac'" case $normalized_program in autoconf*) echo "You should only need it if you modified 'configure.ac'," echo "or m4 files included by it." program_details 'autoconf' ;; autoheader*) echo "You should only need it if you modified 'acconfig.h' or" echo "$configure_deps." program_details 'autoheader' ;; automake*) echo "You should only need it if you modified 'Makefile.am' or" echo "$configure_deps." program_details 'automake' ;; aclocal*) echo "You should only need it if you modified 'acinclude.m4' or" echo "$configure_deps." program_details 'aclocal' ;; autom4te*) echo "You might have modified some maintainer files that require" echo "the 'autom4te' program to be rebuilt." program_details 'autom4te' ;; bison*|yacc*) echo "You should only need it if you modified a '.y' file." echo "You may want to install the GNU Bison package:" echo "<$gnu_software_URL/bison/>" ;; lex*|flex*) echo "You should only need it if you modified a '.l' file." echo "You may want to install the Fast Lexical Analyzer package:" echo "<$flex_URL>" ;; help2man*) echo "You should only need it if you modified a dependency" \ "of a man page." echo "You may want to install the GNU Help2man package:" echo "<$gnu_software_URL/help2man/>" ;; makeinfo*) echo "You should only need it if you modified a '.texi' file, or" echo "any other file indirectly affecting the aspect of the manual." echo "You might want to install the Texinfo package:" echo "<$gnu_software_URL/texinfo/>" echo "The spurious makeinfo call might also be the consequence of" echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" echo "want to install GNU make:" echo "<$gnu_software_URL/make/>" ;; *) echo "You might have modified some files without having the proper" echo "tools for further handling them. Check the 'README' file, it" echo "often tells you about the needed prerequisites for installing" echo "this package. You may also peek at any GNU archive site, in" echo "case some other package contains this missing '$1' program." ;; esac } give_advice "$1" | sed -e '1s/^/WARNING: /' \ -e '2,$s/^/ /' >&2 # Propagate the correct exit status (expected to be 127 for a program # not found, 63 for a program that failed due to version mismatch). exit $st # Local variables: # eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: libgeotiff-1.7.4/geotiff.h.in0000664000175000017500000001527614633042327013000 00000000000000/********************************************************************** * * geotiff.h - Public interface for Geotiff tag parsing. * * Written By: Niles D. Ritter * * copyright (c) 1995 Niles D. Ritter * * Permission granted to use this software, so long as this copyright * notice accompanies any products derived therefrom. **********************************************************************/ #ifndef LIBGEOTIFF_GEOTIFF_H_ #define LIBGEOTIFF_GEOTIFF_H_ /** * \file geotiff.h * * Primary libgeotiff include file. * * This is the de facto registry for valid GeoTIFF GeoKeys * and their associated symbolic values. This is also the only file * of the GeoTIFF library which needs to be included in client source * code. */ /* This Version code should only change if a drastic * alteration is made to the GeoTIFF key structure. Readers * encountering a larger value should give up gracefully. */ #define GvCurrentVersion 1 /* Versions of GeoTIFF specification and corresponding * (version, key_revision, minor_revision) triplets. * At that time, only 2 versions are known: */ /* GEOTIFF_SPEC_1_0 corresponds to the original GeoTIFF specification, * "Revision 1.0, specification version 1.8.2 in November 1995 (N. Ritter & Ruth, 1995)" * available at http://geotiff.maptools.org/spec/geotiffhome.html */ #define GEOTIFF_SPEC_1_0_VERSION 1 #define GEOTIFF_SPEC_1_0_KEY_REVISION 1 #define GEOTIFF_SPEC_1_0_MINOR_REVISION 0 /* GEOTIFF_SPEC_1_1 corresponds to the OGC GeoTIFF standard 19-008 */ #define GEOTIFF_SPEC_1_1_VERSION 1 #define GEOTIFF_SPEC_1_1_KEY_REVISION 1 #define GEOTIFF_SPEC_1_1_MINOR_REVISION 1 /* Library version */ /* LIBGEOTIFF_MAJOR_VERSION, LIBGEOTIFF_MINOR_VERSION, LIBGEOTIFF_PATCH_VERSION, LIBGEOTIFF_REV_VERSION and LIBGEOTIFF_STRING_VERSION are new since libgeotiff 1.7.4. Only LIBGEOTIFF_VERSION pre-existed */ #define LIBGEOTIFF_MAJOR_VERSION @LIBGEOTIFF_MAJOR_VERSION@ #define LIBGEOTIFF_MINOR_VERSION @LIBGEOTIFF_MINOR_VERSION@ #define LIBGEOTIFF_PATCH_VERSION @LIBGEOTIFF_PATCH_VERSION@ #define LIBGEOTIFF_REV_VERSION @LIBGEOTIFF_REV_VERSION@ #define LIBGEOTIFF_VERSION @LIBGEOTIFF_VERSION@ #define LIBGEOTIFF_STRING_VERSION "@LIBGEOTIFF_STRING_VERSION@" #include "geo_config.h" #include "geokeys.h" /********************************************************************** * Do we want to build as a DLL on windows? **********************************************************************/ #if !defined(GTIF_DLL) # if defined(_WIN32) && defined(BUILD_AS_DLL) # define GTIF_DLL __declspec(dllexport) # else # define GTIF_DLL # endif #endif /********************************************************************** * * Public Structures & Definitions * **********************************************************************/ #if defined(__cplusplus) extern "C" { #endif typedef struct gtiff GTIF; /* struct gtiff is private */ typedef struct _TIFFMethod TIFFMethod; typedef unsigned short tifftag_t; typedef unsigned short geocode_t; typedef int (*GTIFPrintMethod)(char *string, void *aux); typedef int (*GTIFReadMethod)(char *string, void *aux); // string 1024+ in size typedef enum { TYPE_BYTE=1, TYPE_SHORT=2, TYPE_LONG=3, TYPE_RATIONAL=4, TYPE_ASCII=5, TYPE_FLOAT=6, TYPE_DOUBLE=7, TYPE_SBYTE=8, TYPE_SSHORT=9, TYPE_SLONG=10, TYPE_UNKNOWN=11 } tagtype_t; #define LIBGEOTIFF_WARNING 0 #define LIBGEOTIFF_ERROR 1 #ifndef GTIF_PRINT_FUNC_FORMAT #if defined(__GNUC__) && __GNUC__ >= 3 #define GTIF_PRINT_FUNC_FORMAT( format_idx, arg_idx ) __attribute__((__format__ (__printf__, format_idx, arg_idx))) #else #define GTIF_PRINT_FUNC_FORMAT( format_idx, arg_idx ) #endif #endif #ifndef GTERRORCALLBACK_DEFINED #define GTERRORCALLBACK_DEFINED /* Defined in both geotiff.h and geo_kep.h */ typedef void (*GTErrorCallback) (struct gtiff*, int level, const char* msg, ...) GTIF_PRINT_FUNC_FORMAT(3,4); #endif /********************************************************************** * * Public Function Declarations * **********************************************************************/ /* TIFF-level interface */ GTIF GTIF_DLL *GTIFNew(void *tif); GTIF GTIF_DLL *GTIFNewEx(void *tif, GTErrorCallback error_callback, void* user_data); GTIF GTIF_DLL *GTIFNewSimpleTags(void *tif); GTIF GTIF_DLL *GTIFNewWithMethods(void *tif, TIFFMethod*); GTIF GTIF_DLL *GTIFNewWithMethodsEx(void *tif, TIFFMethod* methods, GTErrorCallback error_callback, void* user_data); void GTIF_DLL GTIFFree(GTIF *gtif); int GTIF_DLL GTIFWriteKeys(GTIF *gtif); /* versions must be an array of 3 int */ void GTIF_DLL GTIFDirectoryInfo(GTIF *gtif, int versions[3], int *keycount); void GTIF_DLL *GTIFGetUserData(GTIF *gtif); int GTIF_DLL GTIFSetVersionNumbers(GTIF* gtif, unsigned short version, unsigned short key_revision, unsigned short minor_revision); /* GeoKey Access */ int GTIF_DLL GTIFKeyInfo(GTIF *gtif, geokey_t key, int *size, tagtype_t* type); int GTIF_DLL GTIFKeyGet(GTIF *gtif, geokey_t key, void *val, int index, int count); int GTIF_DLL GTIFKeyGetASCII(GTIF *gtif, geokey_t key, char* szStr, int szStrMaxLen); int GTIF_DLL GTIFKeyGetSHORT(GTIF *gtif, geokey_t key, unsigned short *val, int index, int count); int GTIF_DLL GTIFKeyGetDOUBLE(GTIF *gtif, geokey_t key, double *val, int index, int count); int GTIF_DLL GTIFKeySet(GTIF *gtif, geokey_t keyID, tagtype_t type, int count,...); /* Metadata Import-Export utilities */ void GTIF_DLL GTIFPrint(GTIF *gtif, GTIFPrintMethod print, void *aux); int GTIF_DLL GTIFImport(GTIF *gtif, GTIFReadMethod scan, void *aux); char GTIF_DLL *GTIFKeyName(geokey_t key); const char GTIF_DLL *GTIFKeyNameEx(GTIF* gtif, geokey_t key); char GTIF_DLL *GTIFValueName(geokey_t key,int value); const char GTIF_DLL *GTIFValueNameEx(GTIF* gtif, geokey_t key,int value); char GTIF_DLL *GTIFTypeName(tagtype_t type); char GTIF_DLL *GTIFTagName(int tag); int GTIF_DLL GTIFKeyCode(const char * key); int GTIF_DLL GTIFValueCode(geokey_t key,const char *value); int GTIF_DLL GTIFTypeCode(const char *type); int GTIF_DLL GTIFTagCode(const char *tag); /* Translation between image/PCS space */ int GTIF_DLL GTIFImageToPCS( GTIF *gtif, double *x, double *y ); int GTIF_DLL GTIFPCSToImage( GTIF *gtif, double *x, double *y ); #if defined(__cplusplus) } #endif #endif /* LIBGEOTIFF_GEOTIFF_H_ */ libgeotiff-1.7.4/m4/0000775000175000017500000000000014755113373011171 500000000000000libgeotiff-1.7.4/m4/lt~obsolete.m40000644000175000017500000001377414755113347013740 00000000000000# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- # # Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software # Foundation, Inc. # Written by Scott James Remnant, 2004. # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 5 lt~obsolete.m4 # These exist entirely to fool aclocal when bootstrapping libtool. # # In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN), # which have later been changed to m4_define as they aren't part of the # exported API, or moved to Autoconf or Automake where they belong. # # The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN # in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us # using a macro with the same name in our local m4/libtool.m4 it'll # pull the old libtool.m4 in (it doesn't see our shiny new m4_define # and doesn't know about Autoconf macros at all.) # # So we provide this file, which has a silly filename so it's always # included after everything else. This provides aclocal with the # AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything # because those macros already exist, or will be overwritten later. # We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. # # Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. # Yes, that means every name once taken will need to remain here until # we give up compatibility with versions before 1.7, at which point # we need to keep only those names which we still refer to. # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) libgeotiff-1.7.4/m4/ltoptions.m40000644000175000017500000003426214755113347013414 00000000000000# Helper functions for option handling. -*- Autoconf -*- # # Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software # Foundation, Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 8 ltoptions.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) # _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) # ------------------------------------------ m4_define([_LT_MANGLE_OPTION], [[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) # _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) # --------------------------------------- # Set option OPTION-NAME for macro MACRO-NAME, and if there is a # matching handler defined, dispatch to it. Other OPTION-NAMEs are # saved as a flag. m4_define([_LT_SET_OPTION], [m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), _LT_MANGLE_DEFUN([$1], [$2]), [m4_warning([Unknown $1 option '$2'])])[]dnl ]) # _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) # ------------------------------------------------------------ # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. m4_define([_LT_IF_OPTION], [m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) # _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) # ------------------------------------------------------- # Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME # are set. m4_define([_LT_UNLESS_OPTIONS], [m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), [m4_define([$0_found])])])[]dnl m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 ])[]dnl ]) # _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) # ---------------------------------------- # OPTION-LIST is a space-separated list of Libtool options associated # with MACRO-NAME. If any OPTION has a matching handler declared with # LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about # the unknown option and exit. m4_defun([_LT_SET_OPTIONS], [# Set options m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), [_LT_SET_OPTION([$1], _LT_Option)]) m4_if([$1],[LT_INIT],[ dnl dnl Simply set some default values (i.e off) if boolean options were not dnl specified: _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no ]) _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no ]) dnl dnl If no reference was made to various pairs of opposing options, then dnl we run the default mode handler for the pair. For example, if neither dnl 'shared' nor 'disable-shared' was passed, we enable building of shared dnl archives by default: _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], [_LT_ENABLE_FAST_INSTALL]) _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4], [_LT_WITH_AIX_SONAME([aix])]) ]) ])# _LT_SET_OPTIONS ## --------------------------------- ## ## Macros to handle LT_INIT options. ## ## --------------------------------- ## # _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) # ----------------------------------------- m4_define([_LT_MANGLE_DEFUN], [[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) # LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) # ----------------------------------------------- m4_define([LT_OPTION_DEFINE], [m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl ])# LT_OPTION_DEFINE # dlopen # ------ LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes ]) AU_DEFUN([AC_LIBTOOL_DLOPEN], [_LT_SET_OPTION([LT_INIT], [dlopen]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the 'dlopen' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) # win32-dll # --------- # Declare package support for building win32 dll's. LT_OPTION_DEFINE([LT_INIT], [win32-dll], [enable_win32_dll=yes case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) ;; esac test -z "$AS" && AS=as _LT_DECL([], [AS], [1], [Assembler program])dnl test -z "$DLLTOOL" && DLLTOOL=dlltool _LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl test -z "$OBJDUMP" && OBJDUMP=objdump _LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl ])# win32-dll AU_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_REQUIRE([AC_CANONICAL_HOST])dnl _LT_SET_OPTION([LT_INIT], [win32-dll]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the 'win32-dll' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) # _LT_ENABLE_SHARED([DEFAULT]) # ---------------------------- # implement the --enable-shared flag, and supports the 'shared' and # 'disable-shared' LT_INIT options. # DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. m4_define([_LT_ENABLE_SHARED], [m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([shared], [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS=$lt_save_ifs ;; esac], [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) _LT_DECL([build_libtool_libs], [enable_shared], [0], [Whether or not to build shared libraries]) ])# _LT_ENABLE_SHARED LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) # Old names: AC_DEFUN([AC_ENABLE_SHARED], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) ]) AC_DEFUN([AC_DISABLE_SHARED], [_LT_SET_OPTION([LT_INIT], [disable-shared]) ]) AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_ENABLE_SHARED], []) dnl AC_DEFUN([AM_DISABLE_SHARED], []) # _LT_ENABLE_STATIC([DEFAULT]) # ---------------------------- # implement the --enable-static flag, and support the 'static' and # 'disable-static' LT_INIT options. # DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. m4_define([_LT_ENABLE_STATIC], [m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([static], [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS=$lt_save_ifs ;; esac], [enable_static=]_LT_ENABLE_STATIC_DEFAULT) _LT_DECL([build_old_libs], [enable_static], [0], [Whether or not to build static libraries]) ])# _LT_ENABLE_STATIC LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) # Old names: AC_DEFUN([AC_ENABLE_STATIC], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) ]) AC_DEFUN([AC_DISABLE_STATIC], [_LT_SET_OPTION([LT_INIT], [disable-static]) ]) AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_ENABLE_STATIC], []) dnl AC_DEFUN([AM_DISABLE_STATIC], []) # _LT_ENABLE_FAST_INSTALL([DEFAULT]) # ---------------------------------- # implement the --enable-fast-install flag, and support the 'fast-install' # and 'disable-fast-install' LT_INIT options. # DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. m4_define([_LT_ENABLE_FAST_INSTALL], [m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([fast-install], [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS=$lt_save_ifs ;; esac], [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) _LT_DECL([fast_install], [enable_fast_install], [0], [Whether or not to optimize for fast installation])dnl ])# _LT_ENABLE_FAST_INSTALL LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) # Old names: AU_DEFUN([AC_ENABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the 'fast-install' option into LT_INIT's first parameter.]) ]) AU_DEFUN([AC_DISABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], [disable-fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the 'disable-fast-install' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) # _LT_WITH_AIX_SONAME([DEFAULT]) # ---------------------------------- # implement the --with-aix-soname flag, and support the `aix-soname=aix' # and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT # is either `aix', `both' or `svr4'. If omitted, it defaults to `aix'. m4_define([_LT_WITH_AIX_SONAME], [m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl shared_archive_member_spec= case $host,$enable_shared in power*-*-aix[[5-9]]*,yes) AC_MSG_CHECKING([which variant of shared library versioning to provide]) AC_ARG_WITH([aix-soname], [AS_HELP_STRING([--with-aix-soname=aix|svr4|both], [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])], [case $withval in aix|svr4|both) ;; *) AC_MSG_ERROR([Unknown argument to --with-aix-soname]) ;; esac lt_cv_with_aix_soname=$with_aix_soname], [AC_CACHE_VAL([lt_cv_with_aix_soname], [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT) with_aix_soname=$lt_cv_with_aix_soname]) AC_MSG_RESULT([$with_aix_soname]) if test aix != "$with_aix_soname"; then # For the AIX way of multilib, we name the shared archive member # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, # the AIX toolchain works better with OBJECT_MODE set (default 32). if test 64 = "${OBJECT_MODE-32}"; then shared_archive_member_spec=shr_64 else shared_archive_member_spec=shr fi fi ;; *) with_aix_soname=aix ;; esac _LT_DECL([], [shared_archive_member_spec], [0], [Shared archive member basename, for filename based shared library versioning on AIX])dnl ])# _LT_WITH_AIX_SONAME LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])]) LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])]) LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])]) # _LT_WITH_PIC([MODE]) # -------------------- # implement the --with-pic flag, and support the 'pic-only' and 'no-pic' # LT_INIT options. # MODE is either 'yes' or 'no'. If omitted, it defaults to 'both'. m4_define([_LT_WITH_PIC], [AC_ARG_WITH([pic], [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], [lt_p=${PACKAGE-default} case $withval in yes|no) pic_mode=$withval ;; *) pic_mode=default # Look at the argument we got. We use all the common list separators. lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for lt_pkg in $withval; do IFS=$lt_save_ifs if test "X$lt_pkg" = "X$lt_p"; then pic_mode=yes fi done IFS=$lt_save_ifs ;; esac], [pic_mode=m4_default([$1], [default])]) _LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl ])# _LT_WITH_PIC LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) # Old name: AU_DEFUN([AC_LIBTOOL_PICMODE], [_LT_SET_OPTION([LT_INIT], [pic-only]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the 'pic-only' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) ## ----------------- ## ## LTDL_INIT Options ## ## ----------------- ## m4_define([_LTDL_MODE], []) LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], [m4_define([_LTDL_MODE], [nonrecursive])]) LT_OPTION_DEFINE([LTDL_INIT], [recursive], [m4_define([_LTDL_MODE], [recursive])]) LT_OPTION_DEFINE([LTDL_INIT], [subproject], [m4_define([_LTDL_MODE], [subproject])]) m4_define([_LTDL_TYPE], []) LT_OPTION_DEFINE([LTDL_INIT], [installable], [m4_define([_LTDL_TYPE], [installable])]) LT_OPTION_DEFINE([LTDL_INIT], [convenience], [m4_define([_LTDL_TYPE], [convenience])]) libgeotiff-1.7.4/m4/ax_prog_doxygen.m40000664000175000017500000002716214020740032014536 00000000000000# This file is part of Autoconf. -*- Autoconf -*- # Copyright (C) 2004 Oren Ben-Kiki # This file is distributed under the same terms as the Autoconf macro files. ########## CHANGELOG ################## # 2009-01-14 Martin Mann # * DX_ARG_ABLE : new variable 'DX_FLAG_DX_CURRENT_FEATURE' # * DX_CLEAR_DEPEND : use of explicit variable 'DX_FLAG_DX_CURRENT_FEATURE' # in AC_SUBST instead of 'DX_FLAG[]DX_CURRENT_FEATURE' which is rejected by # newer autotools # Generate automatic documentation using Doxygen. Works in concert with the # aminclude.m4 file and a compatible doxygen configuration file. Defines the # following public macros: # # DX_???_FEATURE(ON|OFF) - control the default setting fo a Doxygen feature. # Supported features are 'DOXYGEN' itself, 'DOT' for generating graphics, # 'HTML' for plain HTML, 'CHM' for compressed HTML help (for MS users), 'CHI' # for generating a seperate .chi file by the .chm file, and 'MAN', 'RTF', # 'XML', 'PDF' and 'PS' for the appropriate output formats. The environment # variable DOXYGEN_PAPER_SIZE may be specified to override the default 'a4wide' # paper size. # # By default, HTML, PDF and PS documentation is generated as this seems to be # the most popular and portable combination. MAN pages created by Doxygen are # usually problematic, though by picking an appropriate subset and doing some # massaging they might be better than nothing. CHM and RTF are specific for MS # (note that you can't generate both HTML and CHM at the same time). The XML is # rather useless unless you apply specialized post-processing to it. # # The macro mainly controls the default state of the feature. The use can # override the default by specifying --enable or --disable. The macros ensure # that contradictory flags are not given (e.g., --enable-doxygen-html and # --enable-doxygen-chm, --enable-doxygen-anything with --disable-doxygen, etc.) # Finally, each feature will be automatically disabled (with a warning) if the # required programs are missing. # # Once all the feature defaults have been specified, call DX_INIT_DOXYGEN with # the following parameters: a one-word name for the project for use as a # filename base etc., an optional configuration file name (the default is # 'Doxyfile', the same as Doxygen's default), and an optional output directory # name (the default is 'doxygen-doc'). ## ----------## ## Defaults. ## ## ----------## DX_ENV="" AC_DEFUN([DX_FEATURE_doc], ON) AC_DEFUN([DX_FEATURE_dot], ON) AC_DEFUN([DX_FEATURE_man], OFF) AC_DEFUN([DX_FEATURE_html], ON) AC_DEFUN([DX_FEATURE_chm], OFF) AC_DEFUN([DX_FEATURE_chi], OFF) AC_DEFUN([DX_FEATURE_rtf], OFF) AC_DEFUN([DX_FEATURE_xml], OFF) AC_DEFUN([DX_FEATURE_pdf], ON) AC_DEFUN([DX_FEATURE_ps], ON) ## --------------- ## ## Private macros. ## ## --------------- ## # DX_ENV_APPEND(VARIABLE, VALUE) # ------------------------------ # Append VARIABLE="VALUE" to DX_ENV for invoking doxygen. AC_DEFUN([DX_ENV_APPEND], [AC_SUBST([DX_ENV], ["$DX_ENV $1='$2'"])]) # DX_DIRNAME_EXPR # --------------- # Expand into a shell expression prints the directory part of a path. AC_DEFUN([DX_DIRNAME_EXPR], [[expr ".$1" : '\(\.\)[^/]*$' \| "x$1" : 'x\(.*\)/[^/]*$']]) # DX_IF_FEATURE(FEATURE, IF-ON, IF-OFF) # ------------------------------------- # Expands according to the M4 (static) status of the feature. AC_DEFUN([DX_IF_FEATURE], [ifelse(DX_FEATURE_$1, ON, [$2], [$3])]) # DX_REQUIRE_PROG(VARIABLE, PROGRAM) # ---------------------------------- # Require the specified program to be found for the DX_CURRENT_FEATURE to work. AC_DEFUN([DX_REQUIRE_PROG], [ AC_PATH_TOOL([$1], [$2]) if test "$DX_FLAG_DX_CURRENT_FEATURE$$1" = 1; then AC_MSG_WARN([$2 not found - will not DX_CURRENT_DESCRIPTION]) AC_SUBST([DX_FLAG_DX_CURRENT_FEATURE], 0) fi ]) # DX_TEST_FEATURE(FEATURE) # ------------------------ # Expand to a shell expression testing whether the feature is active. AC_DEFUN([DX_TEST_FEATURE], [test "$DX_FLAG_$1" = 1]) # DX_CHECK_DEPEND(REQUIRED_FEATURE, REQUIRED_STATE) # ------------------------------------------------- # Verify that a required features has the right state before trying to turn on # the DX_CURRENT_FEATURE. AC_DEFUN([DX_CHECK_DEPEND], [ test "$DX_FLAG_$1" = "$2" \ || AC_MSG_ERROR([doxygen-DX_CURRENT_FEATURE ifelse([$2], 1, requires, contradicts) doxygen-DX_CURRENT_FEATURE]) ]) # DX_CLEAR_DEPEND(FEATURE, REQUIRED_FEATURE, REQUIRED_STATE) # ---------------------------------------------------------- # Turn off the DX_CURRENT_FEATURE if the required feature is off. AC_DEFUN([DX_CLEAR_DEPEND], [ test "$DX_FLAG_$1" = "$2" || AC_SUBST([DX_FLAG_DX_CURRENT_FEATURE], 0) ]) # DX_FEATURE_ARG(FEATURE, DESCRIPTION, # CHECK_DEPEND, CLEAR_DEPEND, # REQUIRE, DO-IF-ON, DO-IF-OFF) # -------------------------------------------- # Parse the command-line option controlling a feature. CHECK_DEPEND is called # if the user explicitly turns the feature on (and invokes DX_CHECK_DEPEND), # otherwise CLEAR_DEPEND is called to turn off the default state if a required # feature is disabled (using DX_CLEAR_DEPEND). REQUIRE performs additional # requirement tests (DX_REQUIRE_PROG). Finally, an automake flag is set and # DO-IF-ON or DO-IF-OFF are called according to the final state of the feature. AC_DEFUN([DX_ARG_ABLE], [ AC_DEFUN([DX_CURRENT_FEATURE], [$1]) AC_DEFUN([DX_FLAG_DX_CURRENT_FEATURE], [DX_FLAG_$1]) AC_DEFUN([DX_CURRENT_DESCRIPTION], [$2]) AC_ARG_ENABLE(doxygen-$1, [AS_HELP_STRING(DX_IF_FEATURE([$1], [--disable-doxygen-$1], [--enable-doxygen-$1]), DX_IF_FEATURE([$1], [don't $2], [$2]))], [ case "$enableval" in #( y|Y|yes|Yes|YES) AC_SUBST([DX_FLAG_$1], 1) $3 ;; #( n|N|no|No|NO) AC_SUBST([DX_FLAG_$1], 0) ;; #( *) AC_MSG_ERROR([invalid value '$enableval' given to doxygen-$1]) ;; esac ], [ AC_SUBST([DX_FLAG_$1], [DX_IF_FEATURE([$1], 1, 0)]) $4 ]) if DX_TEST_FEATURE([$1]); then $5 : fi if DX_TEST_FEATURE([$1]); then AM_CONDITIONAL(DX_COND_$1, :) $6 : else AM_CONDITIONAL(DX_COND_$1, false) $7 : fi ]) ## -------------- ## ## Public macros. ## ## -------------- ## # DX_XXX_FEATURE(DEFAULT_STATE) # ----------------------------- AC_DEFUN([DX_DOXYGEN_FEATURE], [AC_DEFUN([DX_FEATURE_doc], [$1])]) AC_DEFUN([DX_MAN_FEATURE], [AC_DEFUN([DX_FEATURE_man], [$1])]) AC_DEFUN([DX_HTML_FEATURE], [AC_DEFUN([DX_FEATURE_html], [$1])]) AC_DEFUN([DX_CHM_FEATURE], [AC_DEFUN([DX_FEATURE_chm], [$1])]) AC_DEFUN([DX_CHI_FEATURE], [AC_DEFUN([DX_FEATURE_chi], [$1])]) AC_DEFUN([DX_RTF_FEATURE], [AC_DEFUN([DX_FEATURE_rtf], [$1])]) AC_DEFUN([DX_XML_FEATURE], [AC_DEFUN([DX_FEATURE_xml], [$1])]) AC_DEFUN([DX_XML_FEATURE], [AC_DEFUN([DX_FEATURE_xml], [$1])]) AC_DEFUN([DX_PDF_FEATURE], [AC_DEFUN([DX_FEATURE_pdf], [$1])]) AC_DEFUN([DX_PS_FEATURE], [AC_DEFUN([DX_FEATURE_ps], [$1])]) # DX_INIT_DOXYGEN(PROJECT, [CONFIG-FILE], [OUTPUT-DOC-DIR]) # --------------------------------------------------------- # PROJECT also serves as the base name for the documentation files. # The default CONFIG-FILE is "Doxyfile" and OUTPUT-DOC-DIR is "doxygen-doc". AC_DEFUN([DX_INIT_DOXYGEN], [ # Files: AC_SUBST([DX_PROJECT], [$1]) AC_SUBST([DX_CONFIG], [ifelse([$2], [], Doxyfile, [$2])]) AC_SUBST([DX_DOCDIR], [ifelse([$3], [], doxygen-doc, [$3])]) # Environment variables used inside doxygen.cfg: DX_ENV_APPEND(SRCDIR, $srcdir) DX_ENV_APPEND(PROJECT, $DX_PROJECT) DX_ENV_APPEND(DOCDIR, $DX_DOCDIR) DX_ENV_APPEND(VERSION, $PACKAGE_VERSION) # Doxygen itself: DX_ARG_ABLE(doc, [generate any doxygen documentation], [], [], [DX_REQUIRE_PROG([DX_DOXYGEN], doxygen) DX_REQUIRE_PROG([DX_PERL], perl)], [DX_ENV_APPEND(PERL_PATH, $DX_PERL)]) # Dot for graphics: DX_ARG_ABLE(dot, [generate graphics for doxygen documentation], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [DX_REQUIRE_PROG([DX_DOT], dot)], [DX_ENV_APPEND(HAVE_DOT, YES) DX_ENV_APPEND(DOT_PATH, [`DX_DIRNAME_EXPR($DX_DOT)`])], [DX_ENV_APPEND(HAVE_DOT, NO)]) # Man pages generation: DX_ARG_ABLE(man, [generate doxygen manual pages], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [], [DX_ENV_APPEND(GENERATE_MAN, YES)], [DX_ENV_APPEND(GENERATE_MAN, NO)]) # RTF file generation: DX_ARG_ABLE(rtf, [generate doxygen RTF documentation], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [], [DX_ENV_APPEND(GENERATE_RTF, YES)], [DX_ENV_APPEND(GENERATE_RTF, NO)]) # XML file generation: DX_ARG_ABLE(xml, [generate doxygen XML documentation], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [], [DX_ENV_APPEND(GENERATE_XML, YES)], [DX_ENV_APPEND(GENERATE_XML, NO)]) # (Compressed) HTML help generation: DX_ARG_ABLE(chm, [generate doxygen compressed HTML help documentation], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [DX_REQUIRE_PROG([DX_HHC], hhc)], [DX_ENV_APPEND(HHC_PATH, $DX_HHC) DX_ENV_APPEND(GENERATE_HTML, YES) DX_ENV_APPEND(GENERATE_HTMLHELP, YES)], [DX_ENV_APPEND(GENERATE_HTMLHELP, NO)]) # Seperate CHI file generation. DX_ARG_ABLE(chi, [generate doxygen seperate compressed HTML help index file], [DX_CHECK_DEPEND(chm, 1)], [DX_CLEAR_DEPEND(chm, 1)], [], [DX_ENV_APPEND(GENERATE_CHI, YES)], [DX_ENV_APPEND(GENERATE_CHI, NO)]) # Plain HTML pages generation: DX_ARG_ABLE(html, [generate doxygen plain HTML documentation], [DX_CHECK_DEPEND(doc, 1) DX_CHECK_DEPEND(chm, 0)], [DX_CLEAR_DEPEND(doc, 1) DX_CLEAR_DEPEND(chm, 0)], [], [DX_ENV_APPEND(GENERATE_HTML, YES)], [DX_TEST_FEATURE(chm) || DX_ENV_APPEND(GENERATE_HTML, NO)]) # PostScript file generation: DX_ARG_ABLE(ps, [generate doxygen PostScript documentation], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [DX_REQUIRE_PROG([DX_LATEX], latex) DX_REQUIRE_PROG([DX_MAKEINDEX], makeindex) DX_REQUIRE_PROG([DX_DVIPS], dvips) DX_REQUIRE_PROG([DX_EGREP], egrep)]) # PDF file generation: DX_ARG_ABLE(pdf, [generate doxygen PDF documentation], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [DX_REQUIRE_PROG([DX_PDFLATEX], pdflatex) DX_REQUIRE_PROG([DX_MAKEINDEX], makeindex) DX_REQUIRE_PROG([DX_EGREP], egrep)]) # LaTeX generation for PS and/or PDF: if DX_TEST_FEATURE(ps) || DX_TEST_FEATURE(pdf); then AM_CONDITIONAL(DX_COND_latex, :) DX_ENV_APPEND(GENERATE_LATEX, YES) else AM_CONDITIONAL(DX_COND_latex, false) DX_ENV_APPEND(GENERATE_LATEX, NO) fi # Paper size for PS and/or PDF: AC_ARG_VAR(DOXYGEN_PAPER_SIZE, [a4wide (default), a4, letter, legal or executive]) case "$DOXYGEN_PAPER_SIZE" in #( "") AC_SUBST(DOXYGEN_PAPER_SIZE, "") ;; #( a4wide|a4|letter|legal|executive) DX_ENV_APPEND(PAPER_SIZE, $DOXYGEN_PAPER_SIZE) ;; #( *) AC_MSG_ERROR([unknown DOXYGEN_PAPER_SIZE='$DOXYGEN_PAPER_SIZE']) ;; esac #For debugging: #echo DX_FLAG_doc=$DX_FLAG_doc #echo DX_FLAG_dot=$DX_FLAG_dot #echo DX_FLAG_man=$DX_FLAG_man #echo DX_FLAG_html=$DX_FLAG_html #echo DX_FLAG_chm=$DX_FLAG_chm #echo DX_FLAG_chi=$DX_FLAG_chi #echo DX_FLAG_rtf=$DX_FLAG_rtf #echo DX_FLAG_xml=$DX_FLAG_xml #echo DX_FLAG_pdf=$DX_FLAG_pdf #echo DX_FLAG_ps=$DX_FLAG_ps #echo DX_ENV=$DX_ENV ]) libgeotiff-1.7.4/m4/libtool.m40000644000175000017500000112676314755113347013036 00000000000000# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- # # Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. m4_define([_LT_COPYING], [dnl # Copyright (C) 2014 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of of the License, or # (at your option) any later version. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program or library that is built # using GNU Libtool, you may include this file under the same # distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . ]) # serial 58 LT_INIT # LT_PREREQ(VERSION) # ------------------ # Complain and exit if this libtool version is less that VERSION. m4_defun([LT_PREREQ], [m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, [m4_default([$3], [m4_fatal([Libtool version $1 or higher is required], 63)])], [$2])]) # _LT_CHECK_BUILDDIR # ------------------ # Complain if the absolute build directory name contains unusual characters m4_defun([_LT_CHECK_BUILDDIR], [case `pwd` in *\ * | *\ *) AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; esac ]) # LT_INIT([OPTIONS]) # ------------------ AC_DEFUN([LT_INIT], [AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl AC_BEFORE([$0], [LT_LANG])dnl AC_BEFORE([$0], [LT_OUTPUT])dnl AC_BEFORE([$0], [LTDL_INIT])dnl m4_require([_LT_CHECK_BUILDDIR])dnl dnl Autoconf doesn't catch unexpanded LT_ macros by default: m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 dnl unless we require an AC_DEFUNed macro: AC_REQUIRE([LTOPTIONS_VERSION])dnl AC_REQUIRE([LTSUGAR_VERSION])dnl AC_REQUIRE([LTVERSION_VERSION])dnl AC_REQUIRE([LTOBSOLETE_VERSION])dnl m4_require([_LT_PROG_LTMAIN])dnl _LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) dnl Parse OPTIONS _LT_SET_OPTIONS([$0], [$1]) # This can be used to rebuild libtool when needed LIBTOOL_DEPS=$ltmain # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl _LT_SETUP # Only expand once: m4_define([LT_INIT]) ])# LT_INIT # Old names: AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_PROG_LIBTOOL], []) dnl AC_DEFUN([AM_PROG_LIBTOOL], []) # _LT_PREPARE_CC_BASENAME # ----------------------- m4_defun([_LT_PREPARE_CC_BASENAME], [ # Calculate cc_basename. Skip known compiler wrappers and cross-prefix. func_cc_basename () { for cc_temp in @S|@*""; do case $cc_temp in compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; \-*) ;; *) break;; esac done func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` } ])# _LT_PREPARE_CC_BASENAME # _LT_CC_BASENAME(CC) # ------------------- # It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME, # but that macro is also expanded into generated libtool script, which # arranges for $SED and $ECHO to be set by different means. m4_defun([_LT_CC_BASENAME], [m4_require([_LT_PREPARE_CC_BASENAME])dnl AC_REQUIRE([_LT_DECL_SED])dnl AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl func_cc_basename $1 cc_basename=$func_cc_basename_result ]) # _LT_FILEUTILS_DEFAULTS # ---------------------- # It is okay to use these file commands and assume they have been set # sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'. m4_defun([_LT_FILEUTILS_DEFAULTS], [: ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} ])# _LT_FILEUTILS_DEFAULTS # _LT_SETUP # --------- m4_defun([_LT_SETUP], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl _LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl dnl _LT_DECL([], [host_alias], [0], [The host system])dnl _LT_DECL([], [host], [0])dnl _LT_DECL([], [host_os], [0])dnl dnl _LT_DECL([], [build_alias], [0], [The build system])dnl _LT_DECL([], [build], [0])dnl _LT_DECL([], [build_os], [0])dnl dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl dnl AC_REQUIRE([AC_PROG_LN_S])dnl test -z "$LN_S" && LN_S="ln -s" _LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl dnl AC_REQUIRE([LT_CMD_MAX_LEN])dnl _LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl _LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl m4_require([_LT_CMD_RELOAD])dnl m4_require([_LT_CHECK_MAGIC_METHOD])dnl m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl m4_require([_LT_CMD_OLD_ARCHIVE])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl m4_require([_LT_WITH_SYSROOT])dnl m4_require([_LT_CMD_TRUNCATE])dnl _LT_CONFIG_LIBTOOL_INIT([ # See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi ]) if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi _LT_CHECK_OBJDIR m4_require([_LT_TAG_COMPILER])dnl case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a '.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld=$lt_cv_prog_gnu_ld old_CC=$CC old_CFLAGS=$CFLAGS # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o _LT_CC_BASENAME([$compiler]) # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then _LT_PATH_MAGIC fi ;; esac # Use C for the default configuration in the libtool script LT_SUPPORTED_TAG([CC]) _LT_LANG_C_CONFIG _LT_LANG_DEFAULT_CONFIG _LT_CONFIG_COMMANDS ])# _LT_SETUP # _LT_PREPARE_SED_QUOTE_VARS # -------------------------- # Define a few sed substitution that help us do robust quoting. m4_defun([_LT_PREPARE_SED_QUOTE_VARS], [# Backslashify metacharacters that are still active within # double-quoted strings. sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\([["`\\]]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' ]) # _LT_PROG_LTMAIN # --------------- # Note that this code is called both from 'configure', and 'config.status' # now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, # 'config.status' has no value for ac_aux_dir unless we are using Automake, # so we pass a copy along to make sure it has a sensible value anyway. m4_defun([_LT_PROG_LTMAIN], [m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl _LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) ltmain=$ac_aux_dir/ltmain.sh ])# _LT_PROG_LTMAIN ## ------------------------------------- ## ## Accumulate code for creating libtool. ## ## ------------------------------------- ## # So that we can recreate a full libtool script including additional # tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS # in macros and then make a single call at the end using the 'libtool' # label. # _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) # ---------------------------------------- # Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. m4_define([_LT_CONFIG_LIBTOOL_INIT], [m4_ifval([$1], [m4_append([_LT_OUTPUT_LIBTOOL_INIT], [$1 ])])]) # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_INIT]) # _LT_CONFIG_LIBTOOL([COMMANDS]) # ------------------------------ # Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. m4_define([_LT_CONFIG_LIBTOOL], [m4_ifval([$1], [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], [$1 ])])]) # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) # _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) # ----------------------------------------------------- m4_defun([_LT_CONFIG_SAVE_COMMANDS], [_LT_CONFIG_LIBTOOL([$1]) _LT_CONFIG_LIBTOOL_INIT([$2]) ]) # _LT_FORMAT_COMMENT([COMMENT]) # ----------------------------- # Add leading comment marks to the start of each line, and a trailing # full-stop to the whole comment if one is not present already. m4_define([_LT_FORMAT_COMMENT], [m4_ifval([$1], [ m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) )]) ## ------------------------ ## ## FIXME: Eliminate VARNAME ## ## ------------------------ ## # _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) # ------------------------------------------------------------------- # CONFIGNAME is the name given to the value in the libtool script. # VARNAME is the (base) name used in the configure script. # VALUE may be 0, 1 or 2 for a computed quote escaped value based on # VARNAME. Any other value will be used directly. m4_define([_LT_DECL], [lt_if_append_uniq([lt_decl_varnames], [$2], [, ], [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], [m4_ifval([$1], [$1], [$2])]) lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) m4_ifval([$4], [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) lt_dict_add_subkey([lt_decl_dict], [$2], [tagged?], [m4_ifval([$5], [yes], [no])])]) ]) # _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) # -------------------------------------------------------- m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) # lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) # ------------------------------------------------ m4_define([lt_decl_tag_varnames], [_lt_decl_filter([tagged?], [yes], $@)]) # _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) # --------------------------------------------------------- m4_define([_lt_decl_filter], [m4_case([$#], [0], [m4_fatal([$0: too few arguments: $#])], [1], [m4_fatal([$0: too few arguments: $#: $1])], [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], [lt_dict_filter([lt_decl_dict], $@)])[]dnl ]) # lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) # -------------------------------------------------- m4_define([lt_decl_quote_varnames], [_lt_decl_filter([value], [1], $@)]) # lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) # --------------------------------------------------- m4_define([lt_decl_dquote_varnames], [_lt_decl_filter([value], [2], $@)]) # lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) # --------------------------------------------------- m4_define([lt_decl_varnames_tagged], [m4_assert([$# <= 2])dnl _$0(m4_quote(m4_default([$1], [[, ]])), m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) m4_define([_lt_decl_varnames_tagged], [m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) # lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) # ------------------------------------------------ m4_define([lt_decl_all_varnames], [_$0(m4_quote(m4_default([$1], [[, ]])), m4_if([$2], [], m4_quote(lt_decl_varnames), m4_quote(m4_shift($@))))[]dnl ]) m4_define([_lt_decl_all_varnames], [lt_join($@, lt_decl_varnames_tagged([$1], lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl ]) # _LT_CONFIG_STATUS_DECLARE([VARNAME]) # ------------------------------------ # Quote a variable value, and forward it to 'config.status' so that its # declaration there will have the same value as in 'configure'. VARNAME # must have a single quote delimited value for this to work. m4_define([_LT_CONFIG_STATUS_DECLARE], [$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) # _LT_CONFIG_STATUS_DECLARATIONS # ------------------------------ # We delimit libtool config variables with single quotes, so when # we write them to config.status, we have to be sure to quote all # embedded single quotes properly. In configure, this macro expands # each variable declared with _LT_DECL (and _LT_TAGDECL) into: # # ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) # _LT_LIBTOOL_TAGS # ---------------- # Output comment and list of tags supported by the script m4_defun([_LT_LIBTOOL_TAGS], [_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl available_tags='_LT_TAGS'dnl ]) # _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) # ----------------------------------- # Extract the dictionary values for VARNAME (optionally with TAG) and # expand to a commented shell variable setting: # # # Some comment about what VAR is for. # visible_name=$lt_internal_name m4_define([_LT_LIBTOOL_DECLARE], [_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [description])))[]dnl m4_pushdef([_libtool_name], m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), [0], [_libtool_name=[$]$1], [1], [_libtool_name=$lt_[]$1], [2], [_libtool_name=$lt_[]$1], [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl ]) # _LT_LIBTOOL_CONFIG_VARS # ----------------------- # Produce commented declarations of non-tagged libtool config variables # suitable for insertion in the LIBTOOL CONFIG section of the 'libtool' # script. Tagged libtool config variables (even for the LIBTOOL CONFIG # section) are produced by _LT_LIBTOOL_TAG_VARS. m4_defun([_LT_LIBTOOL_CONFIG_VARS], [m4_foreach([_lt_var], m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) # _LT_LIBTOOL_TAG_VARS(TAG) # ------------------------- m4_define([_LT_LIBTOOL_TAG_VARS], [m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) # _LT_TAGVAR(VARNAME, [TAGNAME]) # ------------------------------ m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) # _LT_CONFIG_COMMANDS # ------------------- # Send accumulated output to $CONFIG_STATUS. Thanks to the lists of # variables for single and double quote escaping we saved from calls # to _LT_DECL, we can put quote escaped variables declarations # into 'config.status', and then the shell code to quote escape them in # for loops in 'config.status'. Finally, any additional code accumulated # from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. m4_defun([_LT_CONFIG_COMMANDS], [AC_PROVIDE_IFELSE([LT_OUTPUT], dnl If the libtool generation code has been placed in $CONFIG_LT, dnl instead of duplicating it all over again into config.status, dnl then we will have config.status run $CONFIG_LT later, so it dnl needs to know what name is stored there: [AC_CONFIG_COMMANDS([libtool], [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], dnl If the libtool generation code is destined for config.status, dnl expand the accumulated commands and init code now: [AC_CONFIG_COMMANDS([libtool], [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) ])#_LT_CONFIG_COMMANDS # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], [ # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' _LT_CONFIG_STATUS_DECLARATIONS LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$[]1 _LTECHO_EOF' } # Quote evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_quote_varnames); do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[[\\\\\\\`\\"\\\$]]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_dquote_varnames); do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[[\\\\\\\`\\"\\\$]]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done _LT_OUTPUT_LIBTOOL_INIT ]) # _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) # ------------------------------------ # Generate a child script FILE with all initialization necessary to # reuse the environment learned by the parent script, and make the # file executable. If COMMENT is supplied, it is inserted after the # '#!' sequence but before initialization text begins. After this # macro, additional text can be appended to FILE to form the body of # the child script. The macro ends with non-zero status if the # file could not be fully written (such as if the disk is full). m4_ifdef([AS_INIT_GENERATED], [m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], [m4_defun([_LT_GENERATED_FILE_INIT], [m4_require([AS_PREPARE])]dnl [m4_pushdef([AS_MESSAGE_LOG_FD])]dnl [lt_write_fail=0 cat >$1 <<_ASEOF || lt_write_fail=1 #! $SHELL # Generated by $as_me. $2 SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$1 <<\_ASEOF || lt_write_fail=1 AS_SHELL_SANITIZE _AS_PREPARE exec AS_MESSAGE_FD>&1 _ASEOF test 0 = "$lt_write_fail" && chmod +x $1[]dnl m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT # LT_OUTPUT # --------- # This macro allows early generation of the libtool script (before # AC_OUTPUT is called), incase it is used in configure for compilation # tests. AC_DEFUN([LT_OUTPUT], [: ${CONFIG_LT=./config.lt} AC_MSG_NOTICE([creating $CONFIG_LT]) _LT_GENERATED_FILE_INIT(["$CONFIG_LT"], [# Run this file to recreate a libtool stub with the current configuration.]) cat >>"$CONFIG_LT" <<\_LTEOF lt_cl_silent=false exec AS_MESSAGE_LOG_FD>>config.log { echo AS_BOX([Running $as_me.]) } >&AS_MESSAGE_LOG_FD lt_cl_help="\ '$as_me' creates a local libtool stub from the current configuration, for use in further configure time tests before the real libtool is generated. Usage: $[0] [[OPTIONS]] -h, --help print this help, then exit -V, --version print version number, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files Report bugs to ." lt_cl_version="\ m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) configured by $[0], generated by m4_PACKAGE_STRING. Copyright (C) 2011 Free Software Foundation, Inc. This config.lt script is free software; the Free Software Foundation gives unlimited permision to copy, distribute and modify it." while test 0 != $[#] do case $[1] in --version | --v* | -V ) echo "$lt_cl_version"; exit 0 ;; --help | --h* | -h ) echo "$lt_cl_help"; exit 0 ;; --debug | --d* | -d ) debug=: ;; --quiet | --q* | --silent | --s* | -q ) lt_cl_silent=: ;; -*) AC_MSG_ERROR([unrecognized option: $[1] Try '$[0] --help' for more information.]) ;; *) AC_MSG_ERROR([unrecognized argument: $[1] Try '$[0] --help' for more information.]) ;; esac shift done if $lt_cl_silent; then exec AS_MESSAGE_FD>/dev/null fi _LTEOF cat >>"$CONFIG_LT" <<_LTEOF _LT_OUTPUT_LIBTOOL_COMMANDS_INIT _LTEOF cat >>"$CONFIG_LT" <<\_LTEOF AC_MSG_NOTICE([creating $ofile]) _LT_OUTPUT_LIBTOOL_COMMANDS AS_EXIT(0) _LTEOF chmod +x "$CONFIG_LT" # configure is writing to config.log, but config.lt does its own redirection, # appending to config.log, which fails on DOS, as config.log is still kept # open by configure. Here we exec the FD to /dev/null, effectively closing # config.log, so it can be properly (re)opened and appended to by config.lt. lt_cl_success=: test yes = "$silent" && lt_config_lt_args="$lt_config_lt_args --quiet" exec AS_MESSAGE_LOG_FD>/dev/null $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false exec AS_MESSAGE_LOG_FD>>config.log $lt_cl_success || AS_EXIT(1) ])# LT_OUTPUT # _LT_CONFIG(TAG) # --------------- # If TAG is the built-in tag, create an initial libtool script with a # default configuration from the untagged config vars. Otherwise add code # to config.status for appending the configuration named by TAG from the # matching tagged config vars. m4_defun([_LT_CONFIG], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_CONFIG_SAVE_COMMANDS([ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl m4_if(_LT_TAG, [C], [ # See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi cfgfile=${ofile}T trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # Generated automatically by $as_me ($PACKAGE) $VERSION # NOTE: Changes made to this file will be lost: look at ltmain.sh. # Provide generalized library-building support services. # Written by Gordon Matzigkeit, 1996 _LT_COPYING _LT_LIBTOOL_TAGS # Configured defaults for sys_lib_dlsearch_path munging. : \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} # ### BEGIN LIBTOOL CONFIG _LT_LIBTOOL_CONFIG_VARS _LT_LIBTOOL_TAG_VARS # ### END LIBTOOL CONFIG _LT_EOF cat <<'_LT_EOF' >> "$cfgfile" # ### BEGIN FUNCTIONS SHARED WITH CONFIGURE _LT_PREPARE_MUNGE_PATH_LIST _LT_PREPARE_CC_BASENAME # ### END FUNCTIONS SHARED WITH CONFIGURE _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac _LT_PROG_LTMAIN # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ], [cat <<_LT_EOF >> "$ofile" dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded dnl in a comment (ie after a #). # ### BEGIN LIBTOOL TAG CONFIG: $1 _LT_LIBTOOL_TAG_VARS(_LT_TAG) # ### END LIBTOOL TAG CONFIG: $1 _LT_EOF ])dnl /m4_if ], [m4_if([$1], [], [ PACKAGE='$PACKAGE' VERSION='$VERSION' RM='$RM' ofile='$ofile'], []) ])dnl /_LT_CONFIG_SAVE_COMMANDS ])# _LT_CONFIG # LT_SUPPORTED_TAG(TAG) # --------------------- # Trace this macro to discover what tags are supported by the libtool # --tag option, using: # autoconf --trace 'LT_SUPPORTED_TAG:$1' AC_DEFUN([LT_SUPPORTED_TAG], []) # C support is built-in for now m4_define([_LT_LANG_C_enabled], []) m4_define([_LT_TAGS], []) # LT_LANG(LANG) # ------------- # Enable libtool support for the given language if not already enabled. AC_DEFUN([LT_LANG], [AC_BEFORE([$0], [LT_OUTPUT])dnl m4_case([$1], [C], [_LT_LANG(C)], [C++], [_LT_LANG(CXX)], [Go], [_LT_LANG(GO)], [Java], [_LT_LANG(GCJ)], [Fortran 77], [_LT_LANG(F77)], [Fortran], [_LT_LANG(FC)], [Windows Resource], [_LT_LANG(RC)], [m4_ifdef([_LT_LANG_]$1[_CONFIG], [_LT_LANG($1)], [m4_fatal([$0: unsupported language: "$1"])])])dnl ])# LT_LANG # _LT_LANG(LANGNAME) # ------------------ m4_defun([_LT_LANG], [m4_ifdef([_LT_LANG_]$1[_enabled], [], [LT_SUPPORTED_TAG([$1])dnl m4_append([_LT_TAGS], [$1 ])dnl m4_define([_LT_LANG_]$1[_enabled], [])dnl _LT_LANG_$1_CONFIG($1)])dnl ])# _LT_LANG m4_ifndef([AC_PROG_GO], [ ############################################################ # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_GO. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # ############################################################ m4_defun([AC_PROG_GO], [AC_LANG_PUSH(Go)dnl AC_ARG_VAR([GOC], [Go compiler command])dnl AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl _AC_ARG_VAR_LDFLAGS()dnl AC_CHECK_TOOL(GOC, gccgo) if test -z "$GOC"; then if test -n "$ac_tool_prefix"; then AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) fi fi if test -z "$GOC"; then AC_CHECK_PROG(GOC, gccgo, gccgo, false) fi ])#m4_defun ])#m4_ifndef # _LT_LANG_DEFAULT_CONFIG # ----------------------- m4_defun([_LT_LANG_DEFAULT_CONFIG], [AC_PROVIDE_IFELSE([AC_PROG_CXX], [LT_LANG(CXX)], [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) AC_PROVIDE_IFELSE([AC_PROG_F77], [LT_LANG(F77)], [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) AC_PROVIDE_IFELSE([AC_PROG_FC], [LT_LANG(FC)], [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal dnl pulling things in needlessly. AC_PROVIDE_IFELSE([AC_PROG_GCJ], [LT_LANG(GCJ)], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], [LT_LANG(GCJ)], [AC_PROVIDE_IFELSE([LT_PROG_GCJ], [LT_LANG(GCJ)], [m4_ifdef([AC_PROG_GCJ], [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) m4_ifdef([A][M_PROG_GCJ], [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) m4_ifdef([LT_PROG_GCJ], [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) AC_PROVIDE_IFELSE([AC_PROG_GO], [LT_LANG(GO)], [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) AC_PROVIDE_IFELSE([LT_PROG_RC], [LT_LANG(RC)], [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) ])# _LT_LANG_DEFAULT_CONFIG # Obsolete macros: AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_CXX], []) dnl AC_DEFUN([AC_LIBTOOL_F77], []) dnl AC_DEFUN([AC_LIBTOOL_FC], []) dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) dnl AC_DEFUN([AC_LIBTOOL_RC], []) # _LT_TAG_COMPILER # ---------------- m4_defun([_LT_TAG_COMPILER], [AC_REQUIRE([AC_PROG_CC])dnl _LT_DECL([LTCC], [CC], [1], [A C compiler])dnl _LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl _LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl _LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC ])# _LT_TAG_COMPILER # _LT_COMPILER_BOILERPLATE # ------------------------ # Check for compiler boilerplate output or warnings with # the simple compiler test code. m4_defun([_LT_COMPILER_BOILERPLATE], [m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ])# _LT_COMPILER_BOILERPLATE # _LT_LINKER_BOILERPLATE # ---------------------- # Check for linker boilerplate output or warnings with # the simple link test code. m4_defun([_LT_LINKER_BOILERPLATE], [m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* ])# _LT_LINKER_BOILERPLATE # _LT_REQUIRED_DARWIN_CHECKS # ------------------------- m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ case $host_os in rhapsody* | darwin*) AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) AC_CHECK_TOOL([LIPO], [lipo], [:]) AC_CHECK_TOOL([OTOOL], [otool], [:]) AC_CHECK_TOOL([OTOOL64], [otool64], [:]) _LT_DECL([], [DSYMUTIL], [1], [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) _LT_DECL([], [NMEDIT], [1], [Tool to change global to local symbols on Mac OS X]) _LT_DECL([], [LIPO], [1], [Tool to manipulate fat objects and archives on Mac OS X]) _LT_DECL([], [OTOOL], [1], [ldd/readelf like tool for Mach-O binaries on Mac OS X]) _LT_DECL([], [OTOOL64], [1], [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], [lt_cv_apple_cc_single_mod=no if test -z "$LT_MULTI_MODULE"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? # If there is a non-empty error log, and "single_module" # appears in it, assume the flag caused a linker warning if test -s conftest.err && $GREP single_module conftest.err; then cat conftest.err >&AS_MESSAGE_LOG_FD # Otherwise, if the output was created with a 0 exit code from # the compiler, it worked. elif test -f libconftest.dylib && test 0 = "$_lt_result"; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&AS_MESSAGE_LOG_FD fi rm -rf libconftest.dylib* rm -f conftest.* fi]) AC_CACHE_CHECK([for -exported_symbols_list linker flag], [lt_cv_ld_exported_symbols_list], [lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [lt_cv_ld_exported_symbols_list=yes], [lt_cv_ld_exported_symbols_list=no]) LDFLAGS=$save_LDFLAGS ]) AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], [lt_cv_ld_force_load=no cat > conftest.c << _LT_EOF int forced_loaded() { return 2;} _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD echo "$AR cr libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD $AR cr libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD cat > conftest.c << _LT_EOF int main() { return 0;} _LT_EOF echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err _lt_result=$? if test -s conftest.err && $GREP force_load conftest.err; then cat conftest.err >&AS_MESSAGE_LOG_FD elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then lt_cv_ld_force_load=yes else cat conftest.err >&AS_MESSAGE_LOG_FD fi rm -f conftest.err libconftest.a conftest conftest.c rm -rf conftest.dSYM ]) case $host_os in rhapsody* | darwin1.[[012]]) _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; 10.[[012]][[,.]]*) _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test yes = "$lt_cv_apple_cc_single_mod"; then _lt_dar_single_mod='$single_module' fi if test yes = "$lt_cv_ld_exported_symbols_list"; then _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' fi if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac ]) # _LT_DARWIN_LINKER_FEATURES([TAG]) # --------------------------------- # Checks for linker and compiler features on darwin m4_defun([_LT_DARWIN_LINKER_FEATURES], [ m4_require([_LT_REQUIRED_DARWIN_CHECKS]) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported if test yes = "$lt_cv_ld_force_load"; then _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) else _LT_TAGVAR(whole_archive_flag_spec, $1)='' fi _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined case $cc_basename in ifort*|nagfor*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test yes = "$_lt_dar_can_shared"; then output_verbose_link_cmd=func_echo_all _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" m4_if([$1], [CXX], [ if test yes != "$lt_cv_apple_cc_single_mod"; then _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil" fi ],[]) else _LT_TAGVAR(ld_shlibs, $1)=no fi ]) # _LT_SYS_MODULE_PATH_AIX([TAGNAME]) # ---------------------------------- # Links a minimal program and checks the executable # for the system default hardcoded library path. In most cases, # this is /usr/lib:/lib, but when the MPI compilers are used # the location of the communication and MPI libs are included too. # If we don't find anything, use the default library path according # to the aix ld manual. # Store the results from the different compilers for each TAGNAME. # Allow to override them for all tags through lt_cv_aix_libpath. m4_defun([_LT_SYS_MODULE_PATH_AIX], [m4_require([_LT_DECL_SED])dnl if test set = "${lt_cv_aix_libpath+set}"; then aix_libpath=$lt_cv_aix_libpath else AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ lt_aix_libpath_sed='[ /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }]' _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi],[]) if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib fi ]) aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) fi ])# _LT_SYS_MODULE_PATH_AIX # _LT_SHELL_INIT(ARG) # ------------------- m4_define([_LT_SHELL_INIT], [m4_divert_text([M4SH-INIT], [$1 ])])# _LT_SHELL_INIT # _LT_PROG_ECHO_BACKSLASH # ----------------------- # Find how we can fake an echo command that does not interpret backslash. # In particular, with Autoconf 2.60 or later we add some code to the start # of the generated configure script that will find a shell with a builtin # printf (that we can use as an echo command). m4_defun([_LT_PROG_ECHO_BACKSLASH], [ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO AC_MSG_CHECKING([how to print strings]) # Test print first, because it will be a builtin if present. if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='print -r --' elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='printf %s\n' else # Use this function as a fallback that always works. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $[]1 _LTECHO_EOF' } ECHO='func_fallback_echo' fi # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "$*" } case $ECHO in printf*) AC_MSG_RESULT([printf]) ;; print*) AC_MSG_RESULT([print -r]) ;; *) AC_MSG_RESULT([cat]) ;; esac m4_ifdef([_AS_DETECT_SUGGESTED], [_AS_DETECT_SUGGESTED([ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO PATH=/empty FPATH=/empty; export PATH FPATH test "X`printf %s $ECHO`" = "X$ECHO" \ || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) _LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) ])# _LT_PROG_ECHO_BACKSLASH # _LT_WITH_SYSROOT # ---------------- AC_DEFUN([_LT_WITH_SYSROOT], [AC_MSG_CHECKING([for sysroot]) AC_ARG_WITH([sysroot], [AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@], [Search for dependent libraries within DIR (or the compiler's sysroot if not specified).])], [], [with_sysroot=no]) dnl lt_sysroot will always be passed unquoted. We quote it here dnl in case the user passed a directory name. lt_sysroot= case $with_sysroot in #( yes) if test yes = "$GCC"; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( /*) lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` ;; #( no|'') ;; #( *) AC_MSG_RESULT([$with_sysroot]) AC_MSG_ERROR([The sysroot must be an absolute path.]) ;; esac AC_MSG_RESULT([${lt_sysroot:-no}]) _LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl [dependent libraries, and where our libraries should be installed.])]) # _LT_ENABLE_LOCK # --------------- m4_defun([_LT_ENABLE_LOCK], [AC_ARG_ENABLE([libtool-lock], [AS_HELP_STRING([--disable-libtool-lock], [avoid locking (might break parallel builds)])]) test no = "$enable_libtool_lock" || enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out what ABI is being produced by ac_compile, and set mode # options accordingly. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE=32 ;; *ELF-64*) HPUX_IA64_MODE=64 ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out what ABI is being produced by ac_compile, and set linker # options accordingly. echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then if test yes = "$lt_cv_prog_gnu_ld"; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; mips64*-*linux*) # Find out what ABI is being produced by ac_compile, and set linker # options accordingly. echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then emul=elf case `/usr/bin/file conftest.$ac_objext` in *32-bit*) emul="${emul}32" ;; *64-bit*) emul="${emul}64" ;; esac case `/usr/bin/file conftest.$ac_objext` in *MSB*) emul="${emul}btsmip" ;; *LSB*) emul="${emul}ltsmip" ;; esac case `/usr/bin/file conftest.$ac_objext` in *N32*) emul="${emul}n32" ;; esac LD="${LD-ld} -m $emul" fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out what ABI is being produced by ac_compile, and set linker # options accordingly. Note that the listed cases only cover the # situations where additional linker options are needed (such as when # doing 32-bit compilation for a host where ld defaults to 64-bit, or # vice versa); the common cases where no linker options are needed do # not appear in the list. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) case `/usr/bin/file conftest.o` in *x86-64*) LD="${LD-ld} -m elf32_x86_64" ;; *) LD="${LD-ld} -m elf_i386" ;; esac ;; powerpc64le-*linux*) LD="${LD-ld} -m elf32lppclinux" ;; powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; powerpcle-*linux*) LD="${LD-ld} -m elf64lppc" ;; powerpc-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS=$CFLAGS CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_PUSH(C) AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_POP]) if test yes != "$lt_cv_cc_needs_belf"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS=$SAVE_CFLAGS fi ;; *-*solaris*) # Find out what ABI is being produced by ac_compile, and set linker # options accordingly. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) case $host in i?86-*-solaris*|x86_64-*-solaris*) LD="${LD-ld} -m elf_x86_64" ;; sparc*-*-solaris*) LD="${LD-ld} -m elf64_sparc" ;; esac # GNU ld 2.21 introduced _sol2 emulations. Use them if available. if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then LD=${LD-ld}_sol2 fi ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks=$enable_libtool_lock ])# _LT_ENABLE_LOCK # _LT_PROG_AR # ----------- m4_defun([_LT_PROG_AR], [AC_CHECK_TOOLS(AR, [ar], false) : ${AR=ar} : ${AR_FLAGS=cr} _LT_DECL([], [AR], [1], [The archiver]) _LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], [lt_cv_ar_at_file=no AC_COMPILE_IFELSE([AC_LANG_PROGRAM], [echo conftest.$ac_objext > conftest.lst lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' AC_TRY_EVAL([lt_ar_try]) if test 0 -eq "$ac_status"; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a AC_TRY_EVAL([lt_ar_try]) if test 0 -ne "$ac_status"; then lt_cv_ar_at_file=@ fi fi rm -f conftest.* libconftest.a ]) ]) if test no = "$lt_cv_ar_at_file"; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file fi _LT_DECL([], [archiver_list_spec], [1], [How to feed a file listing to the archiver]) ])# _LT_PROG_AR # _LT_CMD_OLD_ARCHIVE # ------------------- m4_defun([_LT_CMD_OLD_ARCHIVE], [_LT_PROG_AR AC_CHECK_TOOL(STRIP, strip, :) test -z "$STRIP" && STRIP=: _LT_DECL([], [STRIP], [1], [A symbol stripping program]) AC_CHECK_TOOL(RANLIB, ranlib, :) test -z "$RANLIB" && RANLIB=: _LT_DECL([], [RANLIB], [1], [Commands used to install an old-style archive]) # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in bitrig* | openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" fi case $host_os in darwin*) lock_old_archive_extraction=yes ;; *) lock_old_archive_extraction=no ;; esac _LT_DECL([], [old_postinstall_cmds], [2]) _LT_DECL([], [old_postuninstall_cmds], [2]) _LT_TAGDECL([], [old_archive_cmds], [2], [Commands used to build an old-style archive]) _LT_DECL([], [lock_old_archive_extraction], [0], [Whether to use a lock for old archive extraction]) ])# _LT_CMD_OLD_ARCHIVE # _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------------------- # Check whether the given compiler option works AC_DEFUN([_LT_COMPILER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$3" ## exclude from sc_useless_quotes_in_assignment # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi fi $RM conftest* ]) if test yes = "[$]$2"; then m4_if([$5], , :, [$5]) else m4_if([$6], , :, [$6]) fi ])# _LT_COMPILER_OPTION # Old name: AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) # _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------- # Check whether the given linker option works AC_DEFUN([_LT_LINKER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS $3" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi else $2=yes fi fi $RM -r conftest* LDFLAGS=$save_LDFLAGS ]) if test yes = "[$]$2"; then m4_if([$4], , :, [$4]) else m4_if([$5], , :, [$5]) fi ])# _LT_LINKER_OPTION # Old name: AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) # LT_CMD_MAX_LEN #--------------- AC_DEFUN([LT_CMD_MAX_LEN], [AC_REQUIRE([AC_CANONICAL_HOST])dnl # find the maximum length of command line arguments AC_MSG_CHECKING([the maximum length of command line arguments]) AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl i=0 teststring=ABCD case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; mint*) # On MiNT this can take a long time and run out of memory. lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; os2*) # The test takes a long time on OS/2. lt_cv_sys_max_cmd_len=8192 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len" && \ test undefined != "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test X`env echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && test 17 != "$i" # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac ]) if test -n "$lt_cv_sys_max_cmd_len"; then AC_MSG_RESULT($lt_cv_sys_max_cmd_len) else AC_MSG_RESULT(none) fi max_cmd_len=$lt_cv_sys_max_cmd_len _LT_DECL([], [max_cmd_len], [0], [What is the maximum length of a command?]) ])# LT_CMD_MAX_LEN # Old name: AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) # _LT_HEADER_DLFCN # ---------------- m4_defun([_LT_HEADER_DLFCN], [AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl ])# _LT_HEADER_DLFCN # _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) # ---------------------------------------------------------------- m4_defun([_LT_TRY_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl if test yes = "$cross_compiling"; then : [$4] else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF [#line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisibility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; }] _LT_EOF if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) $1 ;; x$lt_dlneed_uscore) $2 ;; x$lt_dlunknown|x*) $3 ;; esac else : # compilation failed $3 fi fi rm -fr conftest* ])# _LT_TRY_DLOPEN_SELF # LT_SYS_DLOPEN_SELF # ------------------ AC_DEFUN([LT_SYS_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl if test yes != "$enable_dlopen"; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen=load_add_on lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen=LoadLibrary lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen=dlopen lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[ lt_cv_dlopen=dyld lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ]) ;; tpf*) # Don't try to run any link tests for TPF. We know it's impossible # because TPF is a cross-compiler, and we know how we open DSOs. lt_cv_dlopen=dlopen lt_cv_dlopen_libs= lt_cv_dlopen_self=no ;; *) AC_CHECK_FUNC([shl_load], [lt_cv_dlopen=shl_load], [AC_CHECK_LIB([dld], [shl_load], [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld], [AC_CHECK_FUNC([dlopen], [lt_cv_dlopen=dlopen], [AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl], [AC_CHECK_LIB([svld], [dlopen], [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld], [AC_CHECK_LIB([dld], [dld_link], [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld]) ]) ]) ]) ]) ]) ;; esac if test no = "$lt_cv_dlopen"; then enable_dlopen=no else enable_dlopen=yes fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS=$CPPFLAGS test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS=$LDFLAGS wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS=$LIBS LIBS="$lt_cv_dlopen_libs $LIBS" AC_CACHE_CHECK([whether a program can dlopen itself], lt_cv_dlopen_self, [dnl _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ]) if test yes = "$lt_cv_dlopen_self"; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" AC_CACHE_CHECK([whether a statically linked program can dlopen itself], lt_cv_dlopen_self_static, [dnl _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ]) fi CPPFLAGS=$save_CPPFLAGS LDFLAGS=$save_LDFLAGS LIBS=$save_LIBS ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi _LT_DECL([dlopen_support], [enable_dlopen], [0], [Whether dlopen is supported]) _LT_DECL([dlopen_self], [enable_dlopen_self], [0], [Whether dlopen of programs is supported]) _LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], [Whether dlopen of statically linked programs is supported]) ])# LT_SYS_DLOPEN_SELF # Old name: AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) # _LT_COMPILER_C_O([TAGNAME]) # --------------------------- # Check to see if options -c and -o are simultaneously supported by compiler. # This macro does not hard code the compiler like AC_PROG_CC_C_O. m4_defun([_LT_COMPILER_C_O], [m4_require([_LT_DECL_SED])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_TAG_COMPILER])dnl AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes fi fi chmod u+w . 2>&AS_MESSAGE_LOG_FD $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* ]) _LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], [Does compiler simultaneously support -c and -o options?]) ])# _LT_COMPILER_C_O # _LT_COMPILER_FILE_LOCKS([TAGNAME]) # ---------------------------------- # Check to see if we can do hard links to lock some files if needed m4_defun([_LT_COMPILER_FILE_LOCKS], [m4_require([_LT_ENABLE_LOCK])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_COMPILER_C_O([$1]) hard_links=nottested if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then # do not overwrite the value of need_locks provided by the user AC_MSG_CHECKING([if we can lock with hard links]) hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no AC_MSG_RESULT([$hard_links]) if test no = "$hard_links"; then AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe]) need_locks=warn fi else need_locks=no fi _LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) ])# _LT_COMPILER_FILE_LOCKS # _LT_CHECK_OBJDIR # ---------------- m4_defun([_LT_CHECK_OBJDIR], [AC_CACHE_CHECK([for objdir], [lt_cv_objdir], [rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null]) objdir=$lt_cv_objdir _LT_DECL([], [objdir], [0], [The name of the directory that contains temporary libtool files])dnl m4_pattern_allow([LT_OBJDIR])dnl AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/", [Define to the sub-directory where libtool stores uninstalled libraries.]) ])# _LT_CHECK_OBJDIR # _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) # -------------------------------------- # Check hardcoding attributes. m4_defun([_LT_LINKER_HARDCODE_LIBPATH], [AC_MSG_CHECKING([how to hardcode library paths into programs]) _LT_TAGVAR(hardcode_action, $1)= if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || test -n "$_LT_TAGVAR(runpath_var, $1)" || test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then # We can hardcode non-existent directories. if test no != "$_LT_TAGVAR(hardcode_direct, $1)" && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" && test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then # Linking always hardcodes the temporary library directory. _LT_TAGVAR(hardcode_action, $1)=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. _LT_TAGVAR(hardcode_action, $1)=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. _LT_TAGVAR(hardcode_action, $1)=unsupported fi AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) if test relink = "$_LT_TAGVAR(hardcode_action, $1)" || test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then # Fast installation is not supported enable_fast_install=no elif test yes = "$shlibpath_overrides_runpath" || test no = "$enable_shared"; then # Fast installation is not necessary enable_fast_install=needless fi _LT_TAGDECL([], [hardcode_action], [0], [How to hardcode a shared library path into an executable]) ])# _LT_LINKER_HARDCODE_LIBPATH # _LT_CMD_STRIPLIB # ---------------- m4_defun([_LT_CMD_STRIPLIB], [m4_require([_LT_DECL_EGREP]) striplib= old_striplib= AC_MSG_CHECKING([whether stripping libraries is possible]) if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" AC_MSG_RESULT([yes]) else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP"; then striplib="$STRIP -x" old_striplib="$STRIP -S" AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) fi ;; *) AC_MSG_RESULT([no]) ;; esac fi _LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) _LT_DECL([], [striplib], [1]) ])# _LT_CMD_STRIPLIB # _LT_PREPARE_MUNGE_PATH_LIST # --------------------------- # Make sure func_munge_path_list() is defined correctly. m4_defun([_LT_PREPARE_MUNGE_PATH_LIST], [[# func_munge_path_list VARIABLE PATH # ----------------------------------- # VARIABLE is name of variable containing _space_ separated list of # directories to be munged by the contents of PATH, which is string # having a format: # "DIR[:DIR]:" # string "DIR[ DIR]" will be prepended to VARIABLE # ":DIR[:DIR]" # string "DIR[ DIR]" will be appended to VARIABLE # "DIRP[:DIRP]::[DIRA:]DIRA" # string "DIRP[ DIRP]" will be prepended to VARIABLE and string # "DIRA[ DIRA]" will be appended to VARIABLE # "DIR[:DIR]" # VARIABLE will be replaced by "DIR[ DIR]" func_munge_path_list () { case x@S|@2 in x) ;; *:) eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\" ;; x:*) eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\" ;; *::*) eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\" ;; *) eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\" ;; esac } ]])# _LT_PREPARE_PATH_LIST # _LT_SYS_DYNAMIC_LINKER([TAG]) # ----------------------------- # PORTME Fill in your ld.so characteristics m4_defun([_LT_SYS_DYNAMIC_LINKER], [AC_REQUIRE([AC_CANONICAL_HOST])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_OBJDUMP])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl AC_MSG_CHECKING([dynamic linker characteristics]) m4_if([$1], [], [ if test yes = "$GCC"; then case $host_os in darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; *) lt_awk_arg='/^libraries:/' ;; esac case $host_os in mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;; *) lt_sed_strip_eq='s|=/|/|g' ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in *\;*) # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` ;; *) lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` ;; esac # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary... lt_tmp_lt_search_path_spec= lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` # ...but if some path component already ends with the multilib dir we assume # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). case "$lt_multi_os_dir; $lt_search_path_spec " in "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) lt_multi_os_dir= ;; esac for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" elif test -n "$lt_multi_os_dir"; then test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' BEGIN {RS = " "; FS = "/|\n";} { lt_foo = ""; lt_count = 0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo = "/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[[lt_foo]]++; } if (lt_freq[[lt_foo]] == 1) { print lt_foo; } }'` # AWK program above erroneously prepends '/' to C:/dos/paths # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi]) library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=.so postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown AC_ARG_VAR([LT_SYS_LIBRARY_PATH], [User-defined run-time library search path.]) case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$release$shared_ext$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='$libname$release$shared_ext$major' ;; aix[[4-9]]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no hardcode_into_libs=yes if test ia64 = "$host_cpu"; then # AIX 5 supports IA64 library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line '#! .'. This would cause the generated library to # depend on '.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[[01]] | aix4.[[01]].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # Using Import Files as archive members, it is possible to support # filename-based versioning of shared library archives on AIX. While # this would work for both with and without runtime linking, it will # prevent static linking of such archives. So we do filename-based # shared library versioning with .so extension only, which is used # when both runtime linking and shared linking is enabled. # Unfortunately, runtime linking may impact performance, so we do # not want this to be the default eventually. Also, we use the # versioned .so libs for executables only if there is the -brtl # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. # To allow for filename-based versioning support, we need to create # libNAME.so.V as an archive file, containing: # *) an Import File, referring to the versioned filename of the # archive as well as the shared archive member, telling the # bitwidth (32 or 64) of that shared object, and providing the # list of exported symbols of that shared object, eventually # decorated with the 'weak' keyword # *) the shared object with the F_LOADONLY flag set, to really avoid # it being seen by the linker. # At run time we better use the real file rather than another symlink, # but for link time we create the symlink libNAME.so -> libNAME.so.V case $with_aix_soname,$aix_use_runtimelinking in # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. aix,yes) # traditional libtool dynamic_linker='AIX unversionable lib.so' # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' ;; aix,no) # traditional AIX only dynamic_linker='AIX lib.a[(]lib.so.V[)]' # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='$libname$release.a $libname.a' soname_spec='$libname$release$shared_ext$major' ;; svr4,*) # full svr4 only dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]" library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' # We do not specify a path in Import Files, so LIBPATH fires. shlibpath_overrides_runpath=yes ;; *,yes) # both, prefer svr4 dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]" library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' # unpreferred sharedlib libNAME.a needs extra handling postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' # We do not specify a path in Import Files, so LIBPATH fires. shlibpath_overrides_runpath=yes ;; *,no) # both, prefer aix dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]" library_names_spec='$libname$release.a $libname.a' soname_spec='$libname$release$shared_ext$major' # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' ;; esac shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='$libname$shared_ext' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[[45]]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=.dll need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \$file`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' library_names_spec='$libname.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec=$LIB if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \$file`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' soname_spec='$libname$release$major$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[[23]].*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2.*) shlibpath_overrides_runpath=yes ;; freebsd3.[[01]]* | freebsdelf3.[[01]]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; haiku*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=no sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' if test 32 = "$HPUX_IA64_MODE"; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" sys_lib_dlsearch_path_spec=/usr/lib/hpux32 else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" sys_lib_dlsearch_path_spec=/usr/lib/hpux64 fi ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[[3-9]]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test yes = "$lt_cv_prog_gnu_ld"; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='$libname$release$shared_ext$major' library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; linux*android*) version_type=none # Android doesn't support versioned libraries. need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext' soname_spec='$libname$release$shared_ext' finish_cmds= shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes dynamic_linker='Android linker' # Don't embed -rpath directories since the linker doesn't support them. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], [lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], [lt_cv_shlibpath_overrides_runpath=yes])]) LDFLAGS=$save_LDFLAGS libdir=$save_libdir ]) shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Ideally, we could use ldconfig to report *all* directores which are # searched for libraries, however this is still not possible. Aside from not # being certain /sbin/ldconfig is available, command # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, # even though it is searched at run-time. Try to do the best guess by # appending ld.so.conf contents (and includes) to the search path. if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd* | bitrig*) version_type=sunos sys_lib_dlsearch_path_spec=/usr/lib need_lib_prefix=no if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then need_version=no else need_version=yes fi library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; os2*) libname_spec='$name' version_type=windows shrext_cmds=.dll need_version=no need_lib_prefix=no # OS/2 can only load a DLL with a base name of 8 characters or less. soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; v=$($ECHO $release$versuffix | tr -d .-); n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); $ECHO $n$v`$shared_ext' library_names_spec='${libname}_dll.$libext' dynamic_linker='OS/2 ld.exe' shlibpath_var=BEGINLIBPATH sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec postinstall_cmds='base_file=`basename \$file`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='$libname$release$shared_ext$major' library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test yes = "$with_gnu_ld"; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec; then version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' soname_spec='$libname$shared_ext.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=sco need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test yes = "$with_gnu_ld"; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac AC_MSG_RESULT([$dynamic_linker]) test no = "$dynamic_linker" && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test yes = "$GCC"; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec fi if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec fi # remember unaugmented sys_lib_dlsearch_path content for libtool script decls... configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec # ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" # to be used as default LT_SYS_LIBRARY_PATH value in generated libtool configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH _LT_DECL([], [variables_saved_for_relink], [1], [Variables whose values should be saved in libtool wrapper scripts and restored at link time]) _LT_DECL([], [need_lib_prefix], [0], [Do we need the "lib" prefix for modules?]) _LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) _LT_DECL([], [version_type], [0], [Library versioning type]) _LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) _LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) _LT_DECL([], [shlibpath_overrides_runpath], [0], [Is shlibpath searched before the hard-coded library search path?]) _LT_DECL([], [libname_spec], [1], [Format of library name prefix]) _LT_DECL([], [library_names_spec], [1], [[List of archive names. First name is the real one, the rest are links. The last name is the one that the linker finds with -lNAME]]) _LT_DECL([], [soname_spec], [1], [[The coded name of the library, if different from the real name]]) _LT_DECL([], [install_override_mode], [1], [Permission mode override for installation of shared libraries]) _LT_DECL([], [postinstall_cmds], [2], [Command to use after installation of a shared archive]) _LT_DECL([], [postuninstall_cmds], [2], [Command to use after uninstallation of a shared archive]) _LT_DECL([], [finish_cmds], [2], [Commands used to finish a libtool library installation in a directory]) _LT_DECL([], [finish_eval], [1], [[As "finish_cmds", except a single script fragment to be evaled but not shown]]) _LT_DECL([], [hardcode_into_libs], [0], [Whether we should hardcode library paths into libraries]) _LT_DECL([], [sys_lib_search_path_spec], [2], [Compile-time system search path for libraries]) _LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2], [Detected run-time system search path for libraries]) _LT_DECL([], [configure_time_lt_sys_library_path], [2], [Explicit LT_SYS_LIBRARY_PATH set during ./configure time]) ])# _LT_SYS_DYNAMIC_LINKER # _LT_PATH_TOOL_PREFIX(TOOL) # -------------------------- # find a file program that can recognize shared library AC_DEFUN([_LT_PATH_TOOL_PREFIX], [m4_require([_LT_DECL_EGREP])dnl AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in [[\\/*] | ?:[\\/]*]) lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD=$MAGIC_CMD lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="m4_if([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$1"; then lt_cv_path_MAGIC_CMD=$ac_dir/"$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD=$lt_cv_path_MAGIC_CMD if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS=$lt_save_ifs MAGIC_CMD=$lt_save_MAGIC_CMD ;; esac]) MAGIC_CMD=$lt_cv_path_MAGIC_CMD if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else AC_MSG_RESULT(no) fi _LT_DECL([], [MAGIC_CMD], [0], [Used to examine libraries when file_magic_cmd begins with "file"])dnl ])# _LT_PATH_TOOL_PREFIX # Old name: AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) # _LT_PATH_MAGIC # -------------- # find a file program that can recognize a shared library m4_defun([_LT_PATH_MAGIC], [_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) else MAGIC_CMD=: fi fi ])# _LT_PATH_MAGIC # LT_PATH_LD # ---------- # find the pathname to the GNU or non-GNU linker AC_DEFUN([LT_PATH_LD], [AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_PROG_ECHO_BACKSLASH])dnl AC_ARG_WITH([gnu-ld], [AS_HELP_STRING([--with-gnu-ld], [assume the C compiler uses GNU ld @<:@default=no@:>@])], [test no = "$withval" || with_gnu_ld=yes], [with_gnu_ld=no])dnl ac_prog=ld if test yes = "$GCC"; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by $CC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return, which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]]* | ?:[[\\/]]*) re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD=$ac_prog ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test yes = "$with_gnu_ld"; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD=$ac_dir/$ac_prog # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &1 conftest.i cat conftest.i conftest.i >conftest2.i : ${lt_DD:=$DD} AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd], [if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then cmp -s conftest.i conftest.out \ && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: fi]) rm -f conftest.i conftest2.i conftest.out]) ])# _LT_PATH_DD # _LT_CMD_TRUNCATE # ---------------- # find command to truncate a binary pipe m4_defun([_LT_CMD_TRUNCATE], [m4_require([_LT_PATH_DD]) AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin], [printf 0123456789abcdef0123456789abcdef >conftest.i cat conftest.i conftest.i >conftest2.i lt_cv_truncate_bin= if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then cmp -s conftest.i conftest.out \ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" fi rm -f conftest.i conftest2.i conftest.out test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"]) _LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1], [Command to truncate a binary pipe]) ])# _LT_CMD_TRUNCATE # _LT_CHECK_MAGIC_METHOD # ---------------------- # how to check for library dependencies # -- PORTME fill in with the dynamic library characteristics m4_defun([_LT_CHECK_MAGIC_METHOD], [m4_require([_LT_DECL_EGREP]) m4_require([_LT_DECL_OBJDUMP]) AC_CACHE_CHECK([how to recognize dependent libraries], lt_cv_deplibs_check_method, [lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # 'unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # that responds to the $file_magic_cmd with a given extended regex. # If you have 'file' or equivalent on your system and you're not sure # whether 'pass_all' will *always* work, you probably want this one. case $host_os in aix[[4-9]]*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi[[45]]*) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin*) # func_win32_libid is a shell function defined in ltmain.sh lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' ;; mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. if ( file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else # Keep this pattern in sync with the one in func_win32_libid. lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc*) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; haiku*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[[3-9]]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd* | bitrig*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; os2*) lt_cv_deplibs_check_method=pass_all ;; esac ]) file_magic_glob= want_nocaseglob=no if test "$build" = "$host"; then case $host_os in mingw* | pw32*) if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then want_nocaseglob=yes else file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` fi ;; esac fi file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown _LT_DECL([], [deplibs_check_method], [1], [Method to check whether dependent libraries are shared objects]) _LT_DECL([], [file_magic_cmd], [1], [Command to use when deplibs_check_method = "file_magic"]) _LT_DECL([], [file_magic_glob], [1], [How to find potential files when deplibs_check_method = "file_magic"]) _LT_DECL([], [want_nocaseglob], [1], [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) ])# _LT_CHECK_MAGIC_METHOD # LT_PATH_NM # ---------- # find the pathname to a BSD- or MS-compatible name lister AC_DEFUN([LT_PATH_NM], [AC_REQUIRE([AC_PROG_CC])dnl AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM=$NM else lt_nm_to_check=${ac_tool_prefix}nm if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. tmp_nm=$ac_dir/$lt_tmp_nm if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then # Check to see if the nm accepts a BSD-compat flag. # Adding the 'sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty case $build_os in mingw*) lt_bad_file=conftest.nm/nofile ;; *) lt_bad_file=/dev/null ;; esac case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in *$lt_bad_file* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break 2 ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break 2 ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS=$lt_save_ifs done : ${lt_cv_path_NM=no} fi]) if test no != "$lt_cv_path_NM"; then NM=$lt_cv_path_NM else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : # Let the user override the test. else AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in *COFF*) DUMPBIN="$DUMPBIN -symbols -headers" ;; *) DUMPBIN=: ;; esac fi AC_SUBST([DUMPBIN]) if test : != "$DUMPBIN"; then NM=$DUMPBIN fi fi test -z "$NM" && NM=nm AC_SUBST([NM]) _LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], [lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&AS_MESSAGE_LOG_FD (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&AS_MESSAGE_LOG_FD (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) cat conftest.out >&AS_MESSAGE_LOG_FD if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest*]) ])# LT_PATH_NM # Old names: AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_PROG_NM], []) dnl AC_DEFUN([AC_PROG_NM], []) # _LT_CHECK_SHAREDLIB_FROM_LINKLIB # -------------------------------- # how to determine the name of the shared library # associated with a specific link library. # -- PORTME fill in with the dynamic library characteristics m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], [m4_require([_LT_DECL_EGREP]) m4_require([_LT_DECL_OBJDUMP]) m4_require([_LT_DECL_DLLTOOL]) AC_CACHE_CHECK([how to associate runtime and link libraries], lt_cv_sharedlib_from_linklib_cmd, [lt_cv_sharedlib_from_linklib_cmd='unknown' case $host_os in cygwin* | mingw* | pw32* | cegcc*) # two different shell functions defined in ltmain.sh; # decide which one to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ;; *) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ;; esac ;; *) # fallback: assume linklib IS sharedlib lt_cv_sharedlib_from_linklib_cmd=$ECHO ;; esac ]) sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO _LT_DECL([], [sharedlib_from_linklib_cmd], [1], [Command to associate shared and link libraries]) ])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB # _LT_PATH_MANIFEST_TOOL # ---------------------- # locate the manifest tool m4_defun([_LT_PATH_MANIFEST_TOOL], [AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], [lt_cv_path_mainfest_tool=no echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out cat conftest.err >&AS_MESSAGE_LOG_FD if $GREP 'Manifest Tool' conftest.out > /dev/null; then lt_cv_path_mainfest_tool=yes fi rm -f conftest*]) if test yes != "$lt_cv_path_mainfest_tool"; then MANIFEST_TOOL=: fi _LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl ])# _LT_PATH_MANIFEST_TOOL # _LT_DLL_DEF_P([FILE]) # --------------------- # True iff FILE is a Windows DLL '.def' file. # Keep in sync with func_dll_def_p in the libtool script AC_DEFUN([_LT_DLL_DEF_P], [dnl test DEF = "`$SED -n dnl -e '\''s/^[[ ]]*//'\'' dnl Strip leading whitespace -e '\''/^\(;.*\)*$/d'\'' dnl Delete empty lines and comments -e '\''s/^\(EXPORTS\|LIBRARY\)\([[ ]].*\)*$/DEF/p'\'' dnl -e q dnl Only consider the first "real" line $1`" dnl ])# _LT_DLL_DEF_P # LT_LIB_M # -------- # check for math library AC_DEFUN([LT_LIB_M], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in *-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) # These system don't have libm, or don't need it ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw) AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, cos, LIBM=-lm) ;; esac AC_SUBST([LIBM]) ])# LT_LIB_M # Old name: AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_CHECK_LIBM], []) # _LT_COMPILER_NO_RTTI([TAGNAME]) # ------------------------------- m4_defun([_LT_COMPILER_NO_RTTI], [m4_require([_LT_TAG_COMPILER])dnl _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= if test yes = "$GCC"; then case $cc_basename in nvcc*) _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; *) _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; esac _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], lt_cv_prog_compiler_rtti_exceptions, [-fno-rtti -fno-exceptions], [], [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) fi _LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], [Compiler flag to turn off builtin functions]) ])# _LT_COMPILER_NO_RTTI # _LT_CMD_GLOBAL_SYMBOLS # ---------------------- m4_defun([_LT_CMD_GLOBAL_SYMBOLS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([LT_PATH_NM])dnl AC_REQUIRE([LT_PATH_LD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_TAG_COMPILER])dnl # Check for command to grab the raw symbol name followed by C symbol from nm. AC_MSG_CHECKING([command to parse $NM output from $compiler object]) AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [ # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[[BCDEGRST]]' # Regexp to match symbols that can be accessed directly from C. sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[[BCDT]]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[[ABCDGISTW]]' ;; hpux*) if test ia64 = "$host_cpu"; then symcode='[[ABCDEGRST]]' fi ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; osf*) symcode='[[BCDEGQRST]]' ;; solaris*) symcode='[[BDRT]]' ;; sco3.2v5*) symcode='[[DT]]' ;; sysv4.2uw2*) symcode='[[DT]]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[[ABDT]]' ;; sysv4) symcode='[[DFNSTU]]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[[ABCDGIRSTW]]' ;; esac if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Gets list of data symbols to import. lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" # Adjust the below global symbol transforms to fixup imported variables. lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" lt_c_name_lib_hook="\ -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" else # Disable hooks by default. lt_cv_sys_global_symbol_to_import= lt_cdecl_hook= lt_c_name_hook= lt_c_name_lib_hook= fi # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n"\ $lt_cdecl_hook\ " -e 's/^T .* \(.*\)$/extern int \1();/p'"\ " -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ $lt_c_name_hook\ " -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ " -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" # Transform an extracted symbol line into symbol name with lib prefix and # symbol address. lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ $lt_c_name_lib_hook\ " -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ " -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ " -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function, # D for any global variable and I for any imported variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK ['"\ " {last_section=section; section=\$ 3};"\ " /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ " /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ " /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ " {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ " s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx]" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if AC_TRY_EVAL(ac_compile); then # Now try to grab the symbols. nlist=conftest.nm $ECHO "$as_me:$LINENO: $NM conftest.$ac_objext | $lt_cv_sys_global_symbol_pipe > $nlist" >&AS_MESSAGE_LOG_FD if eval "$NM" conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist 2>&AS_MESSAGE_LOG_FD && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE /* DATA imports from DLLs on WIN32 can't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT@&t@_DLSYM_CONST #elif defined __osf__ /* This system does not cope well with relocations in const data. */ # define LT@&t@_DLSYM_CONST #else # define LT@&t@_DLSYM_CONST const #endif #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ LT@&t@_DLSYM_CONST struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[[]] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS LIBS=conftstm.$ac_objext CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS CFLAGS=$lt_globsym_save_CFLAGS else echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD fi else echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test yes = "$pipe_works"; then break else lt_cv_sys_global_symbol_pipe= fi done ]) if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then AC_MSG_RESULT(failed) else AC_MSG_RESULT(ok) fi # Response file support. if test "$lt_cv_nm_interface" = "MS dumpbin"; then nm_file_list_spec='@' elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then nm_file_list_spec='@' fi _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], [Take the output of nm and produce a listing of raw symbols and C names]) _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], [Transform the output of nm in a proper C declaration]) _LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1], [Transform the output of nm into a list of symbols to manually relocate]) _LT_DECL([global_symbol_to_c_name_address], [lt_cv_sys_global_symbol_to_c_name_address], [1], [Transform the output of nm in a C name address pair]) _LT_DECL([global_symbol_to_c_name_address_lib_prefix], [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], [Transform the output of nm in a C name address pair when lib prefix is needed]) _LT_DECL([nm_interface], [lt_cv_nm_interface], [1], [The name lister interface]) _LT_DECL([], [nm_file_list_spec], [1], [Specify filename containing input files for $NM]) ]) # _LT_CMD_GLOBAL_SYMBOLS # _LT_COMPILER_PIC([TAGNAME]) # --------------------------- m4_defun([_LT_COMPILER_PIC], [m4_require([_LT_TAG_COMPILER])dnl _LT_TAGVAR(lt_prog_compiler_wl, $1)= _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)= m4_if([$1], [CXX], [ # C++ specific cases for pic, static, wl, etc. if test yes = "$GXX"; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the '-m68020' flag to GCC prevents building anything better, # like '-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) case $host_os in os2*) _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' ;; esac ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. _LT_TAGVAR(lt_prog_compiler_static, $1)= ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else case $host_os in aix[[4-9]]*) # All AIX code is PIC. if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; dgux*) case $cc_basename in ec++*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; ghcx*) # Green Hills C++ Compiler _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' if test ia64 != "$host_cpu"; then _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' fi ;; aCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac ;; *) ;; esac ;; interix*) # This is c89, which is MS Visual C++ (no shared libs) # Anyone wants to do a port? ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in KCC*) # KAI C++ Compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; ecpc* ) # old Intel C++ for x86_64, which still supported -KPIC. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; icpc* ) # Intel C++, used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; pgCC* | pgcpp*) # Portland Group C++ compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL 8.0, 9.0 on PPC and BlueGene _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; esac ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ;; *) ;; esac ;; netbsd* | netbsdelf*-gnu) ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; cxx*) # Digital/Compaq C++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) ;; esac ;; psos*) ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; lcc*) # Lucid _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; *) ;; esac ;; vxworks*) ;; *) _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ], [ if test yes = "$GCC"; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the '-m68020' flag to GCC prevents building anything better, # like '-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) case $host_os in os2*) _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' ;; esac ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. _LT_TAGVAR(lt_prog_compiler_static, $1)= ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac case $cc_basename in nvcc*) # Cuda Compiler Driver 2.2 _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" fi ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' case $cc_basename in nagfor*) # NAG Fortran compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) case $host_os in os2*) _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' ;; esac ;; hpux9* | hpux10* | hpux11*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC (with -KPIC) is the default. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in # old Intel for x86_64, which still supported -KPIC. ecc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # flang / f18. f95 an alias for gfortran or flang on Debian flang* | f18* | f95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # Lahey Fortran 8.1. lf95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' ;; nagfor*) # NAG Fortran compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; tcc*) # Fabrice Bellard et al's Tiny C Compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; ccc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All Alpha code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; xl* | bgxl* | bgf* | mpixl*) # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) # Sun Fortran 8.3 passes all unrecognized flags to the linker _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='' ;; *Sun\ F* | *Sun*Fortran*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; *Intel*\ [[CF]]*Compiler*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; *Portland\ Group*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; esac ;; newsos6) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; osf3* | osf4* | osf5*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All OSF/1 code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; rdos*) _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; solaris*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' case $cc_basename in f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; *) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; esac ;; sunos4*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; unicos*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; uts4*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *) _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ]) case $host_os in # For platforms that do not support PIC, -DPIC is meaningless: *djgpp*) _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" ;; esac AC_CACHE_CHECK([for $compiler option to produce PIC], [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) _LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) # # Check to make sure the PIC flag actually works. # if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in "" | " "*) ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; esac], [_LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) fi _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], [Additional compiler flags for building library objects]) _LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], [How to pass a linker flag through the compiler]) # # Check to make sure the static flag actually works. # wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" _LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), $lt_tmp_static_flag, [], [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) _LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], [Compiler flag to prevent dynamic linking]) ])# _LT_COMPILER_PIC # _LT_LINKER_SHLIBS([TAGNAME]) # ---------------------------- # See if the linker supports building shared libraries. m4_defun([_LT_LINKER_SHLIBS], [AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl m4_require([_LT_PATH_MANIFEST_TOOL])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl m4_require([_LT_TAG_COMPILER])dnl AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) m4_if([$1], [CXX], [ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] case $host_os in aix[[4-9]]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to GNU nm, but means don't demangle to AIX nm. # Without the "-l" option, or with the "-B" option, AIX nm treats # weak defined symbols like other global defined symbols, whereas # GNU nm marks them as "W". # While the 'weak' keyword is ignored in the Export File, we need # it in the Import File for the 'aix-soname' feature, so we have # to replace the "-B" option with "-P" for AIX nm. if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi ;; pw32*) _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds ;; cygwin* | mingw* | cegcc*) case $cc_basename in cl*) _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] ;; esac ;; linux* | k*bsd*-gnu | gnu*) _LT_TAGVAR(link_all_deplibs, $1)=no ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac ], [ runpath_var= _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_cmds, $1)= _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(compiler_needs_object, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(old_archive_from_new_cmds, $1)= _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= _LT_TAGVAR(thread_safe_flag_spec, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list _LT_TAGVAR(include_expsyms, $1)= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ' (' and ')$', so one must not match beginning or # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', # as well as any symbol that contains 'd'. _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. dnl Note also adjust exclude_expsyms for C++ above. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test yes != "$GCC"; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd* | bitrig*) with_gnu_ld=no ;; linux* | k*bsd*-gnu | gnu*) _LT_TAGVAR(link_all_deplibs, $1)=no ;; esac _LT_TAGVAR(ld_shlibs, $1)=yes # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no if test yes = "$with_gnu_ld"; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility # with the native linker. However, as the warning in the GNU ld # block says, versions before 2.19.5* couldn't really create working # shared libraries, regardless of the interface used. case `$LD -v 2>&1` in *\ \(GNU\ Binutils\)\ 2.19.5*) ;; *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; *) lt_use_gnu_ld_interface=yes ;; esac ;; *) lt_use_gnu_ld_interface=yes ;; esac fi if test yes = "$lt_use_gnu_ld_interface"; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='$wl' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi supports_anon_versioning=no case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[[3-9]]*) # On AIX/PPC, the GNU linker is very broken if test ia64 != "$host_cpu"; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.19, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to install binutils *** 2.20 or above, or modify your PATH so that a non-GNU linker is found. *** You will then need to restart the configuration process. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file, use it as # is; otherwise, prepend EXPORTS... _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; haiku*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes ;; os2*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)=unsupported shrext_cmds=.dll _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ $ECHO EXPORTS >> $output_objdir/$libname.def~ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ $ECHO EXPORTS >> $output_objdir/$libname.def~ prefix_cmds="$SED"~ if test EXPORTS = "`$SED 1q $export_symbols`"; then prefix_cmds="$prefix_cmds -e 1d"; fi~ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test linux-dietlibc = "$host_os"; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test no = "$tmp_diet" then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 _LT_TAGVAR(whole_archive_flag_spec, $1)= tmp_sharedflag='--shared' ;; nagfor*) # NAGFOR 5.3 tmp_sharedflag='-Wl,-shared' ;; xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' if test yes = "$supports_anon_versioning"; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' fi case $cc_basename in tcc*) _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic' ;; xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' if test yes = "$supports_anon_versioning"; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; sunos4*) _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then runpath_var= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. _LT_TAGVAR(hardcode_minus_L, $1)=yes if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. _LT_TAGVAR(hardcode_direct, $1)=unsupported fi ;; aix[[4-9]]*) if test ia64 = "$host_cpu"; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag= else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to GNU nm, but means don't demangle to AIX nm. # Without the "-l" option, or with the "-B" option, AIX nm treats # weak defined symbols like other global defined symbols, whereas # GNU nm marks them as "W". # While the 'weak' keyword is ignored in the Export File, we need # it in the Import File for the 'aix-soname' feature, so we have # to replace the "-B" option with "-P" for AIX nm. if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # have runtime linking enabled, and use it for executables. # For shared libraries, we enable/disable runtime linking # depending on the kind of the shared library created - # when "with_aix_soname,aix_use_runtimelinking" is: # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables # "aix,yes" lib.so shared, rtl:yes, for executables # lib.a static archive # "both,no" lib.so.V(shr.o) shared, rtl:yes # lib.a(lib.so.V) shared, rtl:no, for executables # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables # lib.a(lib.so.V) shared, rtl:no # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables # lib.a static archive case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then aix_use_runtimelinking=yes break fi done if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then # With aix-soname=svr4, we create the lib.so.V shared archives only, # so we don't have lib.a shared libs to link our executables. # We have to force runtime linking in this case. aix_use_runtimelinking=yes LDFLAGS="$LDFLAGS -Wl,-brtl" fi ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_TAGVAR(archive_cmds, $1)='' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(file_list_spec, $1)='$wl-f,' case $with_aix_soname,$aix_use_runtimelinking in aix,*) ;; # traditional, no import file svr4,* | *,yes) # use import file # The Import File defines what to hardcode. _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no ;; esac if test yes = "$GCC"; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`$CC -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)= fi ;; esac shared_flag='-shared' if test yes = "$aix_use_runtimelinking"; then shared_flag="$shared_flag "'$wl-G' fi # Need to ensure runtime linking is disabled for the traditional # shared library, or the linker may eventually find shared libraries # /with/ Import File - we do not want to mix them. shared_flag_aix='-shared' shared_flag_svr4='-shared $wl-G' else # not using gcc if test ia64 = "$host_cpu"; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test yes = "$aix_use_runtimelinking"; then shared_flag='$wl-G' else shared_flag='$wl-bM:SRE' fi shared_flag_aix='$wl-bM:SRE' shared_flag_svr4='$wl-G' fi fi _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_TAGVAR(always_export_symbols, $1)=yes if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag else if test ia64 = "$host_cpu"; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok' if test yes = "$with_gnu_ld"; then # We only use this code for GNU lds that support --whole-archive. _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' fi _LT_TAGVAR(archive_cmds_need_lc, $1)=yes _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' # -brtl affects multiple linker settings, -berok does not and is overridden later compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`' if test svr4 != "$with_aix_soname"; then # This is similar to how AIX traditionally builds its shared libraries. _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' fi if test aix != "$with_aix_soname"; then _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' else # used by -dlpreopen to get the symbols _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir' fi _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac ;; bsdi[[45]]*) _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in cl*) # Native MSVC _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(file_list_spec, $1)='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then cp "$export_symbols" "$output_objdir/$soname.def"; echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; else $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' # Don't use ranlib _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile=$lt_outputfile.exe lt_tool_outputfile=$lt_tool_outputfile.exe ;; esac~ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # Assume MSVC wrapper _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' # FIXME: Should let the user specify the lib program. _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; esac ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; dgux*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2.*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; hpux9*) if test yes = "$GCC"; then _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' else _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' ;; hpux10*) if test yes,no = "$GCC,$with_gnu_ld"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test no = "$with_gnu_ld"; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes fi ;; hpux11*) if test yes,no = "$GCC,$with_gnu_ld"; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) m4_if($1, [], [ # Older versions of the 11.00 compiler do not understand -b yet # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) _LT_LINKER_OPTION([if $CC understands -b], _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) ;; esac fi if test no = "$with_gnu_ld"; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test yes = "$GCC"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. # This should be the same for all languages, so no per-tag cache variable. AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], [lt_cv_irix_exported_symbol], [save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" AC_LINK_IFELSE( [AC_LANG_SOURCE( [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], [C++], [[int foo (void) { return 0; }]], [Fortran 77], [[ subroutine foo end]], [Fortran], [[ subroutine foo end]])])], [lt_cv_irix_exported_symbol=yes], [lt_cv_irix_exported_symbol=no]) LDFLAGS=$save_LDFLAGS]) if test yes = "$lt_cv_irix_exported_symbol"; then _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' fi _LT_TAGVAR(link_all_deplibs, $1)=no else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes _LT_TAGVAR(link_all_deplibs, $1)=yes ;; linux*) case $cc_basename in tcc*) # Fabrice Bellard et al's Tiny C Compiler _LT_TAGVAR(ld_shlibs, $1)=yes _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; newsos6) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *nto* | *qnx*) ;; openbsd* | bitrig*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' fi else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; os2*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)=unsupported shrext_cmds=.dll _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ $ECHO EXPORTS >> $output_objdir/$libname.def~ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ $ECHO EXPORTS >> $output_objdir/$libname.def~ prefix_cmds="$SED"~ if test EXPORTS = "`$SED 1q $export_symbols`"; then prefix_cmds="$prefix_cmds -e 1d"; fi~ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; osf3*) if test yes = "$GCC"; then _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test yes = "$GCC"; then _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; solaris*) _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' if test yes = "$GCC"; then wlarc='$wl' _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='$wl' _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands '-z linker_flag'. GCC discards it without '$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test yes = "$GCC"; then _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' else _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' fi ;; esac _LT_TAGVAR(link_all_deplibs, $1)=yes ;; sunos4*) if test sequent = "$host_vendor"; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4) case $host_vendor in sni) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' _LT_TAGVAR(hardcode_direct, $1)=no ;; motorola) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4.3*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes _LT_TAGVAR(ld_shlibs, $1)=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' if test yes = "$GCC"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We CANNOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport' runpath_var='LD_RUN_PATH' if test yes = "$GCC"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(ld_shlibs, $1)=no ;; esac if test sni = "$host_vendor"; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym' ;; esac fi fi ]) AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no _LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld _LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl _LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl _LT_DECL([], [extract_expsyms_cmds], [2], [The commands to extract the exported symbol list from a shared archive]) # # Do we need to explicitly link libc? # case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in x|xyes) # Assume -lc should be added _LT_TAGVAR(archive_cmds_need_lc, $1)=yes if test yes,yes = "$GCC,$enable_shared"; then case $_LT_TAGVAR(archive_cmds, $1) in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. AC_CACHE_CHECK([whether -lc should be explicitly linked in], [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), [$RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if AC_TRY_EVAL(ac_compile) 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) _LT_TAGVAR(allow_undefined_flag, $1)= if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) then lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no else lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes fi _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* ]) _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) ;; esac fi ;; esac _LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], [Whether or not to add -lc for building shared libraries]) _LT_TAGDECL([allow_libtool_libs_with_static_runtimes], [enable_shared_with_static_runtimes], [0], [Whether or not to disallow shared libs when runtime libs are static]) _LT_TAGDECL([], [export_dynamic_flag_spec], [1], [Compiler flag to allow reflexive dlopens]) _LT_TAGDECL([], [whole_archive_flag_spec], [1], [Compiler flag to generate shared objects directly from archives]) _LT_TAGDECL([], [compiler_needs_object], [1], [Whether the compiler copes with passing no objects directly]) _LT_TAGDECL([], [old_archive_from_new_cmds], [2], [Create an old-style archive from a shared archive]) _LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], [Create a temporary old-style archive to link instead of a shared archive]) _LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) _LT_TAGDECL([], [archive_expsym_cmds], [2]) _LT_TAGDECL([], [module_cmds], [2], [Commands used to build a loadable module if different from building a shared archive.]) _LT_TAGDECL([], [module_expsym_cmds], [2]) _LT_TAGDECL([], [with_gnu_ld], [1], [Whether we are building with GNU ld or not]) _LT_TAGDECL([], [allow_undefined_flag], [1], [Flag that allows shared libraries with undefined symbols to be built]) _LT_TAGDECL([], [no_undefined_flag], [1], [Flag that enforces no undefined symbols]) _LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], [Flag to hardcode $libdir into a binary during linking. This must work even if $libdir does not exist]) _LT_TAGDECL([], [hardcode_libdir_separator], [1], [Whether we need a single "-rpath" flag with a separated argument]) _LT_TAGDECL([], [hardcode_direct], [0], [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_direct_absolute], [0], [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes DIR into the resulting binary and the resulting library dependency is "absolute", i.e impossible to change by setting $shlibpath_var if the library is relocated]) _LT_TAGDECL([], [hardcode_minus_L], [0], [Set to "yes" if using the -LDIR flag during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_shlibpath_var], [0], [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_automatic], [0], [Set to "yes" if building a shared library automatically hardcodes DIR into the library and all subsequent libraries and executables linked against it]) _LT_TAGDECL([], [inherit_rpath], [0], [Set to yes if linker adds runtime paths of dependent libraries to runtime path list]) _LT_TAGDECL([], [link_all_deplibs], [0], [Whether libtool must link a program against all its dependency libraries]) _LT_TAGDECL([], [always_export_symbols], [0], [Set to "yes" if exported symbols are required]) _LT_TAGDECL([], [export_symbols_cmds], [2], [The commands to list exported symbols]) _LT_TAGDECL([], [exclude_expsyms], [1], [Symbols that should not be listed in the preloaded symbols]) _LT_TAGDECL([], [include_expsyms], [1], [Symbols that must always be exported]) _LT_TAGDECL([], [prelink_cmds], [2], [Commands necessary for linking programs (against libraries) with templates]) _LT_TAGDECL([], [postlink_cmds], [2], [Commands necessary for finishing linking programs]) _LT_TAGDECL([], [file_list_spec], [1], [Specify filename containing input files]) dnl FIXME: Not yet implemented dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], dnl [Compiler flag to generate thread safe objects]) ])# _LT_LINKER_SHLIBS # _LT_LANG_C_CONFIG([TAG]) # ------------------------ # Ensure that the configuration variables for a C compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write # the compiler configuration to 'libtool'. m4_defun([_LT_LANG_C_CONFIG], [m4_require([_LT_DECL_EGREP])dnl lt_save_CC=$CC AC_LANG_PUSH(C) # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' _LT_TAG_COMPILER # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) LT_SYS_DLOPEN_SELF _LT_CMD_STRIPLIB # Report what library types will actually be built AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test no = "$can_build_shared" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test yes = "$enable_shared" && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test ia64 != "$host_cpu"; then case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in yes,aix,yes) ;; # shared object as lib.so file only yes,svr4,*) ;; # shared object as lib.so archive member only yes,*) enable_static=no ;; # shared object in lib.a archive as well esac fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test yes = "$enable_shared" || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_CONFIG($1) fi AC_LANG_POP CC=$lt_save_CC ])# _LT_LANG_C_CONFIG # _LT_LANG_CXX_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a C++ compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write # the compiler configuration to 'libtool'. m4_defun([_LT_LANG_CXX_CONFIG], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_PATH_MANIFEST_TOOL])dnl if test -n "$CXX" && ( test no != "$CXX" && ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) || (test g++ != "$CXX"))); then AC_PROG_CXXCPP else _lt_caught_CXX_error=yes fi AC_LANG_PUSH(C++) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(compiler_needs_object, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for C++ test sources. ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the CXX compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test yes != "$_lt_caught_CXX_error"; then # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} CFLAGS=$CXXFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) if test -n "$compiler"; then # We don't want -fno-exception when compiling C++ code, so set the # no_builtin_flag separately if test yes = "$GXX"; then _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' else _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= fi if test yes = "$GXX"; then # Set up default GNU C++ configuration LT_PATH_LD # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test yes = "$with_gnu_ld"; then _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='$wl' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) _LT_TAGVAR(ld_shlibs, $1)=yes case $host_os in aix3*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aix[[4-9]]*) if test ia64 = "$host_cpu"; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag= else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # have runtime linking enabled, and use it for executables. # For shared libraries, we enable/disable runtime linking # depending on the kind of the shared library created - # when "with_aix_soname,aix_use_runtimelinking" is: # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables # "aix,yes" lib.so shared, rtl:yes, for executables # lib.a static archive # "both,no" lib.so.V(shr.o) shared, rtl:yes # lib.a(lib.so.V) shared, rtl:no, for executables # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables # lib.a(lib.so.V) shared, rtl:no # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables # lib.a static archive case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then # With aix-soname=svr4, we create the lib.so.V shared archives only, # so we don't have lib.a shared libs to link our executables. # We have to force runtime linking in this case. aix_use_runtimelinking=yes LDFLAGS="$LDFLAGS -Wl,-brtl" fi ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_TAGVAR(archive_cmds, $1)='' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(file_list_spec, $1)='$wl-f,' case $with_aix_soname,$aix_use_runtimelinking in aix,*) ;; # no import file svr4,* | *,yes) # use import file # The Import File defines what to hardcode. _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no ;; esac if test yes = "$GXX"; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`$CC -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)= fi esac shared_flag='-shared' if test yes = "$aix_use_runtimelinking"; then shared_flag=$shared_flag' $wl-G' fi # Need to ensure runtime linking is disabled for the traditional # shared library, or the linker may eventually find shared libraries # /with/ Import File - we do not want to mix them. shared_flag_aix='-shared' shared_flag_svr4='-shared $wl-G' else # not using gcc if test ia64 = "$host_cpu"; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test yes = "$aix_use_runtimelinking"; then shared_flag='$wl-G' else shared_flag='$wl-bM:SRE' fi shared_flag_aix='$wl-bM:SRE' shared_flag_svr4='$wl-G' fi fi _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to # export. _LT_TAGVAR(always_export_symbols, $1)=yes if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. # The "-G" linker flag allows undefined symbols. _LT_TAGVAR(no_undefined_flag, $1)='-bernotok' # Determine the default libpath from the value encoded in an empty # executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag else if test ia64 = "$host_cpu"; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok' if test yes = "$with_gnu_ld"; then # We only use this code for GNU lds that support --whole-archive. _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' fi _LT_TAGVAR(archive_cmds_need_lc, $1)=yes _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' # -brtl affects multiple linker settings, -berok does not and is overridden later compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`' if test svr4 != "$with_aix_soname"; then # This is similar to how AIX traditionally builds its shared # libraries. Need -bnortl late, we may have -brtl in LDFLAGS. _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' fi if test aix != "$with_aix_soname"; then _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' else # used by -dlpreopen to get the symbols _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir' fi _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d' fi fi ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; cygwin* | mingw* | pw32* | cegcc*) case $GXX,$cc_basename in ,cl* | no,cl*) # Native MSVC # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(file_list_spec, $1)='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then cp "$export_symbols" "$output_objdir/$soname.def"; echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; else $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes # Don't use ranlib _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile=$lt_outputfile.exe lt_tool_outputfile=$lt_tool_outputfile.exe ;; esac~ func_to_tool_file "$lt_outputfile"~ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # g++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file, use it as # is; otherwise, prepend EXPORTS... _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; os2*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)=unsupported shrext_cmds=.dll _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ $ECHO EXPORTS >> $output_objdir/$libname.def~ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ $ECHO EXPORTS >> $output_objdir/$libname.def~ prefix_cmds="$SED"~ if test EXPORTS = "`$SED 1q $export_symbols`"; then prefix_cmds="$prefix_cmds -e 1d"; fi~ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; dgux*) case $cc_basename in ec++*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; freebsd2.*) # C++ shared libraries reported to be fairly broken before # switch to ELF _LT_TAGVAR(ld_shlibs, $1)=no ;; freebsd-elf*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions _LT_TAGVAR(ld_shlibs, $1)=yes ;; haiku*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes ;; hpux9*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP " \-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test yes = "$GXX"; then _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; hpux10*|hpux11*) if test no = "$with_gnu_ld"; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) ;; *) _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' ;; esac fi case $host_cpu in hppa*64*|ia64*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP " \-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test yes = "$GXX"; then if test no = "$with_gnu_ld"; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test yes = "$GXX"; then if test no = "$with_gnu_ld"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib' fi fi _LT_TAGVAR(link_all_deplibs, $1)=yes ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc* | ecpc* ) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; esac _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ $RANLIB $oldlib' _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 6 and above use weak symbols _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' ;; cxx*) # Compaq C++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' ;; xl* | mpixl* | bgxl*) # IBM XL 8.0 on PPC, with GNU ld _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' if test yes = "$supports_anon_versioning"; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' fi ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; esac ;; esac ;; lynxos*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; m88k*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; mvs*) case $cc_basename in cxx*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; *nto* | *qnx*) _LT_TAGVAR(ld_shlibs, $1)=yes ;; openbsd* | bitrig*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' fi output_verbose_link_cmd=func_echo_all else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using # the KAI C++ compiler. case $host in osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; esac ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; cxx*) case $host in osf3*) _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' ;; *) _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~ $RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ;; esac _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test yes,no = "$GXX,$with_gnu_ld"; then _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' case $host in osf3*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; lcc*) # Lucid # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands '-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; esac _LT_TAGVAR(link_all_deplibs, $1)=yes output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; gcx*) # Green Hills C++ Compiler _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test yes,no = "$GXX,$with_gnu_ld"; then _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"' else # g++ 2.7 appears to require '-G' NOT '-shared' on this # platform. _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir' case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' ;; esac fi ;; esac ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We CANNOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ '"$_LT_TAGVAR(old_archive_cmds, $1)" _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ '"$_LT_TAGVAR(reload_cmds, $1)" ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no _LT_TAGVAR(GCC, $1)=$GXX _LT_TAGVAR(LD, $1)=$LD ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_SYS_HIDDEN_LIBDEPS($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld fi # test yes != "$_lt_caught_CXX_error" AC_LANG_POP ])# _LT_LANG_CXX_CONFIG # _LT_FUNC_STRIPNAME_CNF # ---------------------- # func_stripname_cnf prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). # # This function is identical to the (non-XSI) version of func_stripname, # except this one can be used by m4 code that may be executed by configure, # rather than the libtool script. m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl AC_REQUIRE([_LT_DECL_SED]) AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) func_stripname_cnf () { case @S|@2 in .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;; *) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;; esac } # func_stripname_cnf ])# _LT_FUNC_STRIPNAME_CNF # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) # --------------------------------- # Figure out "hidden" library dependencies from verbose # compiler output when linking a shared library. # Parse the compiler output and extract the necessary # objects, libraries and library flags. m4_defun([_LT_SYS_HIDDEN_LIBDEPS], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl # Dependencies to place before and after the object being linked: _LT_TAGVAR(predep_objects, $1)= _LT_TAGVAR(postdep_objects, $1)= _LT_TAGVAR(predeps, $1)= _LT_TAGVAR(postdeps, $1)= _LT_TAGVAR(compiler_lib_search_path, $1)= dnl we can't use the lt_simple_compile_test_code here, dnl because it contains code intended for an executable, dnl not a library. It's possible we should let each dnl tag define a new lt_????_link_test_code variable, dnl but it's only used here... m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF int a; void foo (void) { a = 0; } _LT_EOF ], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF class Foo { public: Foo (void) { a = 0; } private: int a; }; _LT_EOF ], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF subroutine foo implicit none integer*4 a a=0 return end _LT_EOF ], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF subroutine foo implicit none integer a a=0 return end _LT_EOF ], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF public class foo { private int a; public void bar (void) { a = 0; } }; _LT_EOF ], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF package foo func foo() { } _LT_EOF ]) _lt_libdeps_save_CFLAGS=$CFLAGS case "$CC $CFLAGS " in #( *\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; *\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; *\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; esac dnl Parse the compiler output and extract the necessary dnl objects, libraries and library flags. if AC_TRY_EVAL(ac_compile); then # Parse the compiler output and extract the necessary # objects, libraries and library flags. # Sentinel used to keep track of whether or not we are before # the conftest object file. pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do case $prev$p in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. if test x-L = "$p" || test x-R = "$p"; then prev=$p continue fi # Expand the sysroot to ease extracting the directories later. if test -z "$prev"; then case $p in -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; esac fi case $p in =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; esac if test no = "$pre_test_object_deps_done"; then case $prev in -L | -R) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p else _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p" fi ;; # The "-l" case would never come before the object being # linked, so don't bother handling this case. esac else if test -z "$_LT_TAGVAR(postdeps, $1)"; then _LT_TAGVAR(postdeps, $1)=$prev$p else _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p" fi fi prev= ;; *.lto.$objext) ;; # Ignore GCC LTO objects *.$objext) # This assumes that the test object file only shows up # once in the compiler output. if test "$p" = "conftest.$objext"; then pre_test_object_deps_done=yes continue fi if test no = "$pre_test_object_deps_done"; then if test -z "$_LT_TAGVAR(predep_objects, $1)"; then _LT_TAGVAR(predep_objects, $1)=$p else _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" fi else if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then _LT_TAGVAR(postdep_objects, $1)=$p else _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" fi fi ;; *) ;; # Ignore the rest. esac done # Clean up. rm -f a.out a.exe else echo "libtool.m4: error: problem compiling $1 test program" fi $RM -f confest.$objext CFLAGS=$_lt_libdeps_save_CFLAGS # PORTME: override above test on systems where it is broken m4_if([$1], [CXX], [case $host_os in interix[[3-9]]*) # Interix 3.5 installs completely hosed .la files for C++, so rather than # hack all around it, let's just trust "g++" to DTRT. _LT_TAGVAR(predep_objects,$1)= _LT_TAGVAR(postdep_objects,$1)= _LT_TAGVAR(postdeps,$1)= ;; esac ]) case " $_LT_TAGVAR(postdeps, $1) " in *" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; esac _LT_TAGVAR(compiler_lib_search_dirs, $1)= if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'` fi _LT_TAGDECL([], [compiler_lib_search_dirs], [1], [The directories searched by this compiler when creating a shared library]) _LT_TAGDECL([], [predep_objects], [1], [Dependencies to place before and after the objects being linked to create a shared library]) _LT_TAGDECL([], [postdep_objects], [1]) _LT_TAGDECL([], [predeps], [1]) _LT_TAGDECL([], [postdeps], [1]) _LT_TAGDECL([], [compiler_lib_search_path], [1], [The library search path used internally by the compiler when linking a shared library]) ])# _LT_SYS_HIDDEN_LIBDEPS # _LT_LANG_F77_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a Fortran 77 compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to 'libtool'. m4_defun([_LT_LANG_F77_CONFIG], [AC_LANG_PUSH(Fortran 77) if test -z "$F77" || test no = "$F77"; then _lt_disable_F77=yes fi _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for f77 test sources. ac_ext=f # Object file extension for compiled f77 test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the F77 compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test yes != "$_lt_disable_F77"; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_GCC=$GCC lt_save_CFLAGS=$CFLAGS CC=${F77-"f77"} CFLAGS=$FFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) GCC=$G77 if test -n "$compiler"; then AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test no = "$can_build_shared" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test yes = "$enable_shared" && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test ia64 != "$host_cpu"; then case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in yes,aix,yes) ;; # shared object as lib.so file only yes,svr4,*) ;; # shared object as lib.so archive member only yes,*) enable_static=no ;; # shared object in lib.a archive as well esac fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test yes = "$enable_shared" || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_TAGVAR(GCC, $1)=$G77 _LT_TAGVAR(LD, $1)=$LD ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS fi # test yes != "$_lt_disable_F77" AC_LANG_POP ])# _LT_LANG_F77_CONFIG # _LT_LANG_FC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for a Fortran compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to 'libtool'. m4_defun([_LT_LANG_FC_CONFIG], [AC_LANG_PUSH(Fortran) if test -z "$FC" || test no = "$FC"; then _lt_disable_FC=yes fi _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for fc test sources. ac_ext=${ac_fc_srcext-f} # Object file extension for compiled fc test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the FC compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test yes != "$_lt_disable_FC"; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_GCC=$GCC lt_save_CFLAGS=$CFLAGS CC=${FC-"f95"} CFLAGS=$FCFLAGS compiler=$CC GCC=$ac_cv_fc_compiler_gnu _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) if test -n "$compiler"; then AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test no = "$can_build_shared" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test yes = "$enable_shared" && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test ia64 != "$host_cpu"; then case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in yes,aix,yes) ;; # shared object as lib.so file only yes,svr4,*) ;; # shared object as lib.so archive member only yes,*) enable_static=no ;; # shared object in lib.a archive as well esac fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test yes = "$enable_shared" || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu _LT_TAGVAR(LD, $1)=$LD ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_SYS_HIDDEN_LIBDEPS($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS fi # test yes != "$_lt_disable_FC" AC_LANG_POP ])# _LT_LANG_FC_CONFIG # _LT_LANG_GCJ_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for the GNU Java Compiler compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to 'libtool'. m4_defun([_LT_LANG_GCJ_CONFIG], [AC_REQUIRE([LT_PROG_GCJ])dnl AC_LANG_SAVE # Source file extension for Java test sources. ac_ext=java # Object file extension for compiled Java test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="class foo {}" # Code to be used in simple link tests lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC=yes CC=${GCJ-"gcj"} CFLAGS=$GCJFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_TAGVAR(LD, $1)=$LD _LT_CC_BASENAME([$compiler]) # GCJ did not exist at the time GCC didn't implicitly link libc in. _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi AC_LANG_RESTORE GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_GCJ_CONFIG # _LT_LANG_GO_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for the GNU Go compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to 'libtool'. m4_defun([_LT_LANG_GO_CONFIG], [AC_REQUIRE([LT_PROG_GO])dnl AC_LANG_SAVE # Source file extension for Go test sources. ac_ext=go # Object file extension for compiled Go test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="package main; func main() { }" # Code to be used in simple link tests lt_simple_link_test_code='package main; func main() { }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC=yes CC=${GOC-"gccgo"} CFLAGS=$GOFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_TAGVAR(LD, $1)=$LD _LT_CC_BASENAME([$compiler]) # Go did not exist at the time GCC didn't implicitly link libc in. _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi AC_LANG_RESTORE GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_GO_CONFIG # _LT_LANG_RC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for the Windows resource compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to 'libtool'. m4_defun([_LT_LANG_RC_CONFIG], [AC_REQUIRE([LT_PROG_RC])dnl AC_LANG_SAVE # Source file extension for RC test sources. ac_ext=rc # Object file extension for compiled RC test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' # Code to be used in simple link tests lt_simple_link_test_code=$lt_simple_compile_test_code # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC= CC=${RC-"windres"} CFLAGS= compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes if test -n "$compiler"; then : _LT_CONFIG($1) fi GCC=$lt_save_GCC AC_LANG_RESTORE CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_RC_CONFIG # LT_PROG_GCJ # ----------- AC_DEFUN([LT_PROG_GCJ], [m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj,) test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2" AC_SUBST(GCJFLAGS)])])[]dnl ]) # Old name: AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_GCJ], []) # LT_PROG_GO # ---------- AC_DEFUN([LT_PROG_GO], [AC_CHECK_TOOL(GOC, gccgo,) ]) # LT_PROG_RC # ---------- AC_DEFUN([LT_PROG_RC], [AC_CHECK_TOOL(RC, windres,) ]) # Old name: AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_RC], []) # _LT_DECL_EGREP # -------------- # If we don't have a new enough Autoconf to choose the best grep # available, choose the one first in the user's PATH. m4_defun([_LT_DECL_EGREP], [AC_REQUIRE([AC_PROG_EGREP])dnl AC_REQUIRE([AC_PROG_FGREP])dnl test -z "$GREP" && GREP=grep _LT_DECL([], [GREP], [1], [A grep program that handles long lines]) _LT_DECL([], [EGREP], [1], [An ERE matcher]) _LT_DECL([], [FGREP], [1], [A literal string matcher]) dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too AC_SUBST([GREP]) ]) # _LT_DECL_OBJDUMP # -------------- # If we don't have a new enough Autoconf to choose the best objdump # available, choose the one first in the user's PATH. m4_defun([_LT_DECL_OBJDUMP], [AC_CHECK_TOOL(OBJDUMP, objdump, false) test -z "$OBJDUMP" && OBJDUMP=objdump _LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) AC_SUBST([OBJDUMP]) ]) # _LT_DECL_DLLTOOL # ---------------- # Ensure DLLTOOL variable is set. m4_defun([_LT_DECL_DLLTOOL], [AC_CHECK_TOOL(DLLTOOL, dlltool, false) test -z "$DLLTOOL" && DLLTOOL=dlltool _LT_DECL([], [DLLTOOL], [1], [DLL creation program]) AC_SUBST([DLLTOOL]) ]) # _LT_DECL_SED # ------------ # Check for a fully-functional sed program, that truncates # as few characters as possible. Prefer GNU sed if found. m4_defun([_LT_DECL_SED], [AC_PROG_SED test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" _LT_DECL([], [SED], [1], [A sed program that does not truncate output]) _LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], [Sed that helps us avoid accidentally triggering echo(1) options like -n]) ])# _LT_DECL_SED m4_ifndef([AC_PROG_SED], [ ############################################################ # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_SED. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # ############################################################ m4_defun([AC_PROG_SED], [AC_MSG_CHECKING([for a sed that does not truncate output]) AC_CACHE_VAL(lt_cv_path_SED, [# Loop through the user's path and test for sed and gsed. # Then use that list of sed's as ones to test for truncation. as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for lt_ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" fi done done done IFS=$as_save_IFS lt_ac_max=0 lt_ac_count=0 # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do test ! -f "$lt_ac_sed" && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in # Check for GNU sed and select it if it is found. if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then lt_cv_path_SED=$lt_ac_sed break fi while true; do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo >>conftest.nl $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break cmp -s conftest.out conftest.nl || break # 10000 chars as input seems more than enough test 10 -lt "$lt_ac_count" && break lt_ac_count=`expr $lt_ac_count + 1` if test "$lt_ac_count" -gt "$lt_ac_max"; then lt_ac_max=$lt_ac_count lt_cv_path_SED=$lt_ac_sed fi done done ]) SED=$lt_cv_path_SED AC_SUBST([SED]) AC_MSG_RESULT([$SED]) ])#AC_PROG_SED ])#m4_ifndef # Old name: AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_SED], []) # _LT_CHECK_SHELL_FEATURES # ------------------------ # Find out whether the shell is Bourne or XSI compatible, # or has some other useful features. m4_defun([_LT_CHECK_SHELL_FEATURES], [if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi _LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac _LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl _LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl ])# _LT_CHECK_SHELL_FEATURES # _LT_PATH_CONVERSION_FUNCTIONS # ----------------------------- # Determine what file name conversion functions should be used by # func_to_host_file (and, implicitly, by func_to_host_path). These are needed # for certain cross-compile configurations and native mingw. m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_MSG_CHECKING([how to convert $build file names to $host format]) AC_CACHE_VAL(lt_cv_to_host_file_cmd, [case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ;; esac ;; *-*-cygwin* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_noop ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ;; esac ;; * ) # unhandled hosts (and "normal" native builds) lt_cv_to_host_file_cmd=func_convert_file_noop ;; esac ]) to_host_file_cmd=$lt_cv_to_host_file_cmd AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) _LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], [0], [convert $build file names to $host format])dnl AC_MSG_CHECKING([how to convert $build file names to toolchain format]) AC_CACHE_VAL(lt_cv_to_tool_file_cmd, [#assume ordinary cross tools, or native build. lt_cv_to_tool_file_cmd=func_convert_file_noop case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ;; esac ;; esac ]) to_tool_file_cmd=$lt_cv_to_tool_file_cmd AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) _LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], [0], [convert $build files to toolchain format])dnl ])# _LT_PATH_CONVERSION_FUNCTIONS libgeotiff-1.7.4/m4/ltsugar.m40000644000175000017500000001044014755113347013032 00000000000000# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- # # Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software # Foundation, Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 6 ltsugar.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) # lt_join(SEP, ARG1, [ARG2...]) # ----------------------------- # Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their # associated separator. # Needed until we can rely on m4_join from Autoconf 2.62, since all earlier # versions in m4sugar had bugs. m4_define([lt_join], [m4_if([$#], [1], [], [$#], [2], [[$2]], [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) m4_define([_lt_join], [m4_if([$#$2], [2], [], [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) # lt_car(LIST) # lt_cdr(LIST) # ------------ # Manipulate m4 lists. # These macros are necessary as long as will still need to support # Autoconf-2.59, which quotes differently. m4_define([lt_car], [[$1]]) m4_define([lt_cdr], [m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], [$#], 1, [], [m4_dquote(m4_shift($@))])]) m4_define([lt_unquote], $1) # lt_append(MACRO-NAME, STRING, [SEPARATOR]) # ------------------------------------------ # Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'. # Note that neither SEPARATOR nor STRING are expanded; they are appended # to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). # No SEPARATOR is output if MACRO-NAME was previously undefined (different # than defined and empty). # # This macro is needed until we can rely on Autoconf 2.62, since earlier # versions of m4sugar mistakenly expanded SEPARATOR but not STRING. m4_define([lt_append], [m4_define([$1], m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) # lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) # ---------------------------------------------------------- # Produce a SEP delimited list of all paired combinations of elements of # PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list # has the form PREFIXmINFIXSUFFIXn. # Needed until we can rely on m4_combine added in Autoconf 2.62. m4_define([lt_combine], [m4_if(m4_eval([$# > 3]), [1], [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl [[m4_foreach([_Lt_prefix], [$2], [m4_foreach([_Lt_suffix], ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) # lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) # ----------------------------------------------------------------------- # Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited # by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. m4_define([lt_if_append_uniq], [m4_ifdef([$1], [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], [lt_append([$1], [$2], [$3])$4], [$5])], [lt_append([$1], [$2], [$3])$4])]) # lt_dict_add(DICT, KEY, VALUE) # ----------------------------- m4_define([lt_dict_add], [m4_define([$1($2)], [$3])]) # lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) # -------------------------------------------- m4_define([lt_dict_add_subkey], [m4_define([$1($2:$3)], [$4])]) # lt_dict_fetch(DICT, KEY, [SUBKEY]) # ---------------------------------- m4_define([lt_dict_fetch], [m4_ifval([$3], m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) # lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) # ----------------------------------------------------------------- m4_define([lt_if_dict_fetch], [m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], [$5], [$6])]) # lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) # -------------------------------------------------------------- m4_define([lt_dict_filter], [m4_if([$5], [], [], [lt_join(m4_quote(m4_default([$4], [[, ]])), lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl ]) libgeotiff-1.7.4/m4/ltversion.m40000644000175000017500000000127314755113347013402 00000000000000# ltversion.m4 -- version numbers -*- Autoconf -*- # # Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # @configure_input@ # serial 4179 ltversion.m4 # This file is part of GNU Libtool m4_define([LT_PACKAGE_VERSION], [2.4.6]) m4_define([LT_PACKAGE_REVISION], [2.4.6]) AC_DEFUN([LTVERSION_VERSION], [macro_version='2.4.6' macro_revision='2.4.6' _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) _LT_DECL(, macro_revision, 0) ]) libgeotiff-1.7.4/m4/doxygen.am0000664000175000017500000001116014020740032013063 00000000000000# Copyright (C) 2004 Oren Ben-Kiki # This file is distributed under the same terms as the Automake macro files. # Generate automatic documentation using Doxygen. Goals and variables values # are controlled by the various DX_COND_??? conditionals set by autoconf. # # The provided goals are: # doxygen-doc: Generate all doxygen documentation. # doxygen-run: Run doxygen, which will generate some of the documentation # (HTML, CHM, CHI, MAN, RTF, XML) but will not do the post # processing required for the rest of it (PS, PDF, and some MAN). # doxygen-man: Rename some doxygen generated man pages. # doxygen-ps: Generate doxygen PostScript documentation. # doxygen-pdf: Generate doxygen PDF documentation. # # Note that by default these are not integrated into the automake goals. If # doxygen is used to generate man pages, you can achieve this integration by # setting man3_MANS to the list of man pages generated and then adding the # dependency: # # $(man3_MANS): doxygen-doc # # This will cause make to run doxygen and generate all the documentation. # # The following variable is intended for use in Makefile.am: # # DX_CLEANFILES = everything to clean. # # This is usually added to MOSTLYCLEANFILES. ## --------------------------------- ## ## Format-independent Doxygen rules. ## ## --------------------------------- ## if DX_COND_doc ## ------------------------------- ## ## Rules specific for HTML output. ## ## ------------------------------- ## if DX_COND_html DX_CLEAN_HTML = @DX_DOCDIR@/html endif DX_COND_html ## ------------------------------ ## ## Rules specific for CHM output. ## ## ------------------------------ ## if DX_COND_chm DX_CLEAN_CHM = @DX_DOCDIR@/chm if DX_COND_chi DX_CLEAN_CHI = @DX_DOCDIR@/@PACKAGE@.chi endif DX_COND_chi endif DX_COND_chm ## ------------------------------ ## ## Rules specific for MAN output. ## ## ------------------------------ ## if DX_COND_man DX_CLEAN_MAN = @DX_DOCDIR@/man endif DX_COND_man ## ------------------------------ ## ## Rules specific for RTF output. ## ## ------------------------------ ## if DX_COND_rtf DX_CLEAN_RTF = @DX_DOCDIR@/rtf endif DX_COND_rtf ## ------------------------------ ## ## Rules specific for XML output. ## ## ------------------------------ ## if DX_COND_xml DX_CLEAN_XML = @DX_DOCDIR@/xml endif DX_COND_xml ## ----------------------------- ## ## Rules specific for PS output. ## ## ----------------------------- ## if DX_COND_ps DX_CLEAN_PS = @DX_DOCDIR@/@PACKAGE@.ps DX_PS_GOAL = doxygen-ps doxygen-ps: @DX_DOCDIR@/@PACKAGE@.ps @DX_DOCDIR@/@PACKAGE@.ps: @DX_DOCDIR@/@PACKAGE@.tag cd @DX_DOCDIR@/latex; \ rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ $(DX_LATEX) refman.tex; \ $(MAKEINDEX_PATH) refman.idx; \ $(DX_LATEX) refman.tex; \ countdown=5; \ while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ refman.log > /dev/null 2>&1 \ && test $$countdown -gt 0; do \ $(DX_LATEX) refman.tex; \ countdown=`expr $$countdown - 1`; \ done; \ $(DX_DVIPS) -o ../@PACKAGE@.ps refman.dvi endif DX_COND_ps ## ------------------------------ ## ## Rules specific for PDF output. ## ## ------------------------------ ## if DX_COND_pdf DX_CLEAN_PDF = @DX_DOCDIR@/@PACKAGE@.pdf DX_PDF_GOAL = doxygen-pdf doxygen-pdf: @DX_DOCDIR@/@PACKAGE@.pdf @DX_DOCDIR@/@PACKAGE@.pdf: @DX_DOCDIR@/@PACKAGE@.tag cd @DX_DOCDIR@/latex; \ rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ $(DX_PDFLATEX) refman.tex; \ $(DX_MAKEINDEX) refman.idx; \ $(DX_PDFLATEX) refman.tex; \ countdown=5; \ while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ refman.log > /dev/null 2>&1 \ && test $$countdown -gt 0; do \ $(DX_PDFLATEX) refman.tex; \ countdown=`expr $$countdown - 1`; \ done; \ mv refman.pdf ../@PACKAGE@.pdf endif DX_COND_pdf ## ------------------------------------------------- ## ## Rules specific for LaTeX (shared for PS and PDF). ## ## ------------------------------------------------- ## if DX_COND_latex DX_CLEAN_LATEX = @DX_DOCDIR@/latex endif DX_COND_latex .PHONY: doxygen-run doxygen-doc $(DX_PS_GOAL) $(DX_PDF_GOAL) .INTERMEDIATE: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) doxygen-run: @DX_DOCDIR@/@PACKAGE@.tag docs: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) @DX_DOCDIR@/@PACKAGE@.tag: $(DX_CONFIG) $(pkginclude_HEADERS) rm -rf @DX_DOCDIR@ $(DX_ENV) $(DX_DOXYGEN) $(srcdir)/$(DX_CONFIG) DX_CLEANFILES = \ -r @DX_DOCDIR@/@PACKAGE@.tag \ $(DX_CLEAN_HTML) \ $(DX_CLEAN_CHM) \ $(DX_CLEAN_CHI) \ $(DX_CLEAN_MAN) \ $(DX_CLEAN_RTF) \ $(DX_CLEAN_XML) \ $(DX_CLEAN_PS) \ $(DX_CLEAN_PDF) \ $(DX_CLEAN_LATEX) endif DX_COND_doc libgeotiff-1.7.4/configure0000775000175000017500000200547314755113350012506 00000000000000#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.69 for libgeotiff 1.7.4. # # Report bugs to . # # # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. # # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # Use a proper internal environment variable to ensure we don't fall # into an infinite loop, continuously re-executing ourselves. if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then _as_can_reexec=no; export _as_can_reexec; # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 as_fn_exit 255 fi # We don't want this to propagate to other subprocesses. { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi " as_required="as_fn_return () { (exit \$1); } as_fn_success () { as_fn_return 0; } as_fn_failure () { as_fn_return 1; } as_fn_ret_success () { return 0; } as_fn_ret_failure () { return 1; } exitcode=0 as_fn_success || { exitcode=1; echo as_fn_success failed.; } as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : else exitcode=1; echo positional parameters were not saved. fi test x\$exitcode = x0 || exit 1 test -x / || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO PATH=/empty FPATH=/empty; export PATH FPATH test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1 test \$(( 1 + 1 )) = 2 || exit 1" if (eval "$as_required") 2>/dev/null; then : as_have_required=yes else as_have_required=no fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. as_found=: case $as_dir in #( /*) for as_base in sh bash ksh sh5; do # Try only shells that exist, to save several forks. as_shell=$as_dir/$as_base if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : CONFIG_SHELL=$as_shell as_have_required=yes if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : break 2 fi fi done;; esac as_found=false done $as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : CONFIG_SHELL=$SHELL as_have_required=yes fi; } IFS=$as_save_IFS if test "x$CONFIG_SHELL" != x; then : export CONFIG_SHELL # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 fi if test x$as_have_required = xno; then : $as_echo "$0: This script requires a shell more modern than all" $as_echo "$0: the shells that I found on your system." if test x${ZSH_VERSION+set} = xset ; then $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" $as_echo "$0: be upgraded to zsh 4.3.4 or later." else $as_echo "$0: Please tell bug-autoconf@gnu.org and $0: warmerdam@pobox.com about your system, including any $0: error possibly output before this message. Then install $0: a modern shell, or manually run the script under such a $0: shell if you do have one." fi exit 1 fi fi fi SHELL=${CONFIG_SHELL-/bin/sh} export SHELL # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS ## --------------------- ## ## M4sh Shell Functions. ## ## --------------------- ## # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_lineno_1=$LINENO as_lineno_1a=$LINENO as_lineno_2=$LINENO as_lineno_2a=$LINENO eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # If we had to re-execute with $CONFIG_SHELL, we're ensured to have # already done that, so ensure we don't try to do so again and fall # in an infinite loop. This has already happened in practice. _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" SHELL=${CONFIG_SHELL-/bin/sh} test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= # Identity of this package. PACKAGE_NAME='libgeotiff' PACKAGE_TARNAME='libgeotiff' PACKAGE_VERSION='1.7.4' PACKAGE_STRING='libgeotiff 1.7.4' PACKAGE_BUGREPORT='warmerdam@pobox.com' PACKAGE_URL='' # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_subst_vars='am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS LIBOBJS DOXYGEN_PAPER_SIZE DX_COND_latex_FALSE DX_COND_latex_TRUE DX_COND_pdf_FALSE DX_COND_pdf_TRUE DX_PDFLATEX DX_FLAG_pdf DX_COND_ps_FALSE DX_COND_ps_TRUE DX_EGREP DX_DVIPS DX_MAKEINDEX DX_LATEX DX_FLAG_ps DX_COND_html_FALSE DX_COND_html_TRUE DX_FLAG_html DX_COND_chi_FALSE DX_COND_chi_TRUE DX_FLAG_chi DX_COND_chm_FALSE DX_COND_chm_TRUE DX_HHC DX_FLAG_chm DX_COND_xml_FALSE DX_COND_xml_TRUE DX_FLAG_xml DX_COND_rtf_FALSE DX_COND_rtf_TRUE DX_FLAG_rtf DX_COND_man_FALSE DX_COND_man_TRUE DX_FLAG_man DX_COND_dot_FALSE DX_COND_dot_TRUE DX_DOT DX_FLAG_dot DX_COND_doc_FALSE DX_COND_doc_TRUE DX_PERL DX_FLAG_DX_CURRENT_FEATURE DX_DOXYGEN DX_FLAG_doc DX_ENV DX_DOCDIR DX_CONFIG DX_PROJECT NOUNDEFINED PROJ_INCLUDE PROJ_LIBS PROJ_CFLAGS TIFF_IS_CONFIG_FALSE TIFF_IS_CONFIG_TRUE TIFF_PREFIX TIFF_INC LIBTIFF_LIBS LIBTIFF_CFLAGS PKG_CONFIG_LIBDIR PKG_CONFIG_PATH PKG_CONFIG JPEG_IS_CONFIG_FALSE JPEG_IS_CONFIG_TRUE JPEG_PREFIX JPEG_INC ZIP_IS_CONFIG_FALSE ZIP_IS_CONFIG_TRUE ZIP_PREFIX ZIP_INC CPP LT_SYS_LIBRARY_PATH OTOOL64 OTOOL LIPO NMEDIT DSYMUTIL MANIFEST_TOOL RANLIB ac_ct_AR AR DLLTOOL OBJDUMP NM ac_ct_DUMPBIN DUMPBIN LD FGREP EGREP GREP SED host_os host_vendor host_cpu host LIBTOOL LN_S am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE am__nodep AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE am__include DEPDIR OBJEXT EXEEXT ac_ct_CC CPPFLAGS LDFLAGS CFLAGS CC MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE AM_BACKSLASH AM_DEFAULT_VERBOSITY AM_DEFAULT_V AM_V am__untar am__tar AMTAR am__leading_dot SET_MAKE AWK mkdir_p MKDIR_P INSTALL_STRIP_PROGRAM STRIP install_sh MAKEINFO AUTOHEADER AUTOMAKE AUTOCONF ACLOCAL VERSION PACKAGE CYGPATH_W am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM LIBGEOTIFF_VERSION LIBGEOTIFF_STRING_VERSION LIBGEOTIFF_REV_VERSION LIBGEOTIFF_PATCH_VERSION LIBGEOTIFF_MINOR_VERSION LIBGEOTIFF_MAJOR_VERSION build_os build_vendor build_cpu build target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir runstatedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL am__quote' ac_subst_files='' ac_user_opts=' enable_option_checking enable_silent_rules enable_maintainer_mode enable_dependency_tracking enable_shared enable_static with_pic enable_fast_install with_aix_soname with_gnu_ld with_sysroot enable_libtool_lock enable_debug with_zip with_zlib with_libz with_jpeg with_libtiff with_proj enable_towgs84 enable_doxygen_doc enable_doxygen_dot enable_doxygen_man enable_doxygen_rtf enable_doxygen_xml enable_doxygen_chm enable_doxygen_chi enable_doxygen_html enable_doxygen_ps enable_doxygen_pdf ' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS LT_SYS_LIBRARY_PATH CPP PKG_CONFIG PKG_CONFIG_PATH PKG_CONFIG_LIBDIR LIBTIFF_CFLAGS LIBTIFF_LIBS PROJ_CFLAGS PROJ_LIBS DOXYGEN_PAPER_SIZE' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' runstatedir='${localstatedir}/run' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *=) ac_optarg= ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -runstatedir | --runstatedir | --runstatedi | --runstated \ | --runstate | --runstat | --runsta | --runst | --runs \ | --run | --ru | --r) ac_prev=runstatedir ;; -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \ | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \ | --run=* | --ru=* | --r=*) runstatedir=$ac_optarg ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) as_fn_error $? "unrecognized option: \`$ac_option' Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir runstatedir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures libgeotiff 1.7.4 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/libgeotiff] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of libgeotiff 1.7.4:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-silent-rules less verbose build output (undo: "make V=1") --disable-silent-rules verbose build output (undo: "make V=0") --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer --enable-dependency-tracking do not reject slow dependency extractors --disable-dependency-tracking speeds up one-time build --enable-shared[=PKGS] build shared libraries [default=yes] --enable-static[=PKGS] build static libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) --enable-debug=ARG Enable debug compilation mode [yes|no], default=no --disable-towgs84 Disable WGS84 parameters for binary compatibility with pre-1.4.1 --disable-doxygen-doc don't generate any doxygen documentation --disable-doxygen-dot don't generate graphics for doxygen documentation --disable-doxygen-man don't generate doxygen manual pages --enable-doxygen-rtf generate doxygen RTF documentation --enable-doxygen-xml generate doxygen XML documentation --enable-doxygen-chm generate doxygen compressed HTML help documentation --enable-doxygen-chi generate doxygen seperate compressed HTML help index file --disable-doxygen-html don't generate doxygen plain HTML documentation --enable-doxygen-ps generate doxygen PostScript documentation --enable-doxygen-pdf generate doxygen PDF documentation Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use both] --with-aix-soname=aix|svr4|both shared library versioning (aka "SONAME") variant to provide on AIX, [default=aix]. --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-sysroot[=DIR] Search for dependent libraries within DIR (or the compiler's sysroot if not specified). --with-zip=ARG zlib library to use (yes or path) --with-zlib=ARG alias for --with-zip --with-libz=ARG alias for --with-zip --with-jpeg=ARG jpeg library to use (yes or path) --with-libtiff=dir Use libtiff in directory dir --with-proj=ARG Compile with PROJ.x (ARG=yes or path) Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory LT_SYS_LIBRARY_PATH User-defined run-time library search path. CPP C preprocessor PKG_CONFIG path to pkg-config utility PKG_CONFIG_PATH directories to add to pkg-config's search path PKG_CONFIG_LIBDIR path overriding pkg-config's built-in search path LIBTIFF_CFLAGS C compiler flags for LIBTIFF, overriding pkg-config LIBTIFF_LIBS linker flags for LIBTIFF, overriding pkg-config PROJ_CFLAGS C compiler flags for PROJ, overriding pkg-config PROJ_LIBS linker flags for PROJ, overriding pkg-config DOXYGEN_PAPER_SIZE a4wide (default), a4, letter, legal or executive Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to . _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF libgeotiff configure 1.7.4 generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## # ac_fn_c_try_compile LINENO # -------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_compile # ac_fn_c_try_link LINENO # ----------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || test -x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_link # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in # INCLUDES, setting the cache variable VAR accordingly. ac_fn_c_check_header_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_compile # ac_fn_c_try_cpp LINENO # ---------------------- # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } > conftest.i && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_cpp # ac_fn_c_try_run LINENO # ---------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. Assumes # that executables *can* be run. ac_fn_c_try_run () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then : ac_retval=0 else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=$ac_status fi rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_run # ac_fn_c_check_func LINENO FUNC VAR # ---------------------------------- # Tests whether FUNC exists, setting the cache variable VAR accordingly ac_fn_c_check_func () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Define $2 to an innocuous variant, in case declares $2. For example, HP-UX 11i declares gettimeofday. */ #define $2 innocuous_$2 /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $2 (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $2 /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $2 (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$2 || defined __stub___$2 choke me #endif int main () { return $2 (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_func # ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists, giving a warning if it cannot be compiled using # the include files in INCLUDES and setting the cache variable VAR # accordingly. ac_fn_c_check_header_mongrel () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if eval \${$3+:} false; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 $as_echo_n "checking $2 usability... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_header_compiler=yes else ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 $as_echo_n "checking $2 presence... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <$2> _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : ac_header_preproc=yes else ac_header_preproc=no fi rm -f conftest.err conftest.i conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( yes:no: ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ;; no:yes:* ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ( $as_echo "## ---------------------------------- ## ## Report this to warmerdam@pobox.com ## ## ---------------------------------- ##" ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else eval "$3=\$ac_header_compiler" fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_mongrel cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by libgeotiff $as_me 1.7.4, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done { ac_configure_args0=; unset ac_configure_args0;} { ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo $as_echo "## ---------------- ## ## Cache variables. ## ## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo $as_echo "## ----------------- ## ## Output variables. ## ## ----------------- ##" echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then $as_echo "## ------------------- ## ## File substitutions. ## ## ------------------- ##" echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then $as_echo "## ----------- ## ## confdefs.h. ## ## ----------- ##" echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h $as_echo "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_URL "$PACKAGE_URL" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then # We do not want a PATH search for config.site. case $CONFIG_SITE in #(( -*) ac_site_file1=./$CONFIG_SITE;; */*) ac_site_file1=$CONFIG_SITE;; *) ac_site_file1=./$CONFIG_SITE;; esac elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" \ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "failed to load site script $ac_site_file See \`config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special files # actually), so we avoid doing that. DJGPP emulates it as a regular file. if test /dev/null != "$cache_file" && test -f "$cache_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## ## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } if ${ac_cv_build+:} false; then : $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; *) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' set x $ac_cv_build shift build_cpu=$1 build_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: build_os=$* IFS=$ac_save_IFS case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac LIBGEOTIFF_MAJOR_VERSION=1 LIBGEOTIFF_MINOR_VERSION=7 LIBGEOTIFF_PATCH_VERSION=4 LIBGEOTIFF_REV_VERSION=0 LIBGEOTIFF_STRING_VERSION=${LIBGEOTIFF_MAJOR_VERSION}.${LIBGEOTIFF_MINOR_VERSION}.${LIBGEOTIFF_PATCH_VERSION} LIBGEOTIFF_VERSION="${LIBGEOTIFF_MAJOR_VERSION}${LIBGEOTIFF_MINOR_VERSION}${LIBGEOTIFF_PATCH_VERSION}${LIBGEOTIFF_REV_VERSION}" ac_config_headers="$ac_config_headers geo_config.h" ac_config_files="$ac_config_files geotiff.h" am__api_version='1.16' # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if ${ac_cv_path_install+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in #(( ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". as_fn_error $? "ls -t appears to fail. Make sure there is not a broken alias in your environment" "$LINENO" 5 fi if test "$2" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$2" = conftest.file ) then # Ok. : else as_fn_error $? "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi rm -f conftest.file test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` # Expand $ac_aux_dir to an absolute path. am_aux_dir=`cd "$ac_aux_dir" && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then if ${ac_cv_path_mkdir+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext break 3;; esac done done done IFS=$as_save_IFS fi test -d ./--version && rmdir ./--version if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else # As a last resort, use the slow shell script. Don't cache a # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. MKDIR_P="$ac_install_sh -d" fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_AWK+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering ...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null # Check whether --enable-silent-rules was given. if test "${enable_silent_rules+set}" = set; then : enableval=$enable_silent_rules; fi case $enable_silent_rules in # ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=1;; esac am_make=${MAKE-make} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 $as_echo_n "checking whether $am_make supports nested variables... " >&6; } if ${am_cv_make_support_nested_variables+:} false; then : $as_echo_n "(cached) " >&6 else if $as_echo 'TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 $as_echo "$am_cv_make_support_nested_variables" >&6; } if test $am_cv_make_support_nested_variables = yes; then AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AM_BACKSLASH='\' if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE='libgeotiff' VERSION='1.7.4' cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # mkdir_p='$(MKDIR_P)' # We need awk for the "check" target (and possibly the TAP driver). The # system "awk" is bad on some platforms. # Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AMTAR='$${TAR-tar}' # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar pax cpio none' am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' # POSIX will say in a future version that running "rm -f" with no argument # is OK; and we want to be able to make that assumption in our Makefile # recipes. So use an aggressive probe to check that the usage we want is # actually supported "in the wild" to an acceptable degree. # See automake bug#10828. # To make any issue more visible, cause the running configure to be aborted # by default if the 'rm' program in use doesn't match our expectations; the # user can still override this though. if rm -f && rm -fr && rm -rf; then : OK; else cat >&2 <<'END' Oops! Your 'rm' program seems unable to run without file operands specified on the command line, even when the '-f' option is present. This is contrary to the behaviour of most rm programs out there, and not conforming with the upcoming POSIX standard: Please tell bug-automake@gnu.org about your system, including the value of your $PATH and any error possibly output before this message. This can help us improve future automake versions. END if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then echo 'Configuration will proceed anyway, since you have set the' >&2 echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 echo >&2 else cat >&2 <<'END' Aborting the configuration process, to ensure you take notice of the issue. You can download and install GNU coreutils to get an 'rm' implementation that behaves properly: . If you want to complete the configuration process using your problematic 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM to "yes", and re-run configure. END as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } # Check whether --enable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then : enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval else USE_MAINTAINER_MODE=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 $as_echo "$USE_MAINTAINER_MODE" >&6; } if test $USE_MAINTAINER_MODE = yes; then MAINTAINER_MODE_TRUE= MAINTAINER_MODE_FALSE='#' else MAINTAINER_MODE_TRUE='#' MAINTAINER_MODE_FALSE= fi MAINT=$MAINTAINER_MODE_TRUE ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 $as_echo_n "checking whether the C compiler works... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi if test -z "$ac_file"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error 77 "C compiler cannot create executables See \`config.log' for more details" "$LINENO" 5; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 $as_echo_n "checking for C compiler default output file name... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of executables: cannot compile and link See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest conftest$ac_cv_exeext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { FILE *f = fopen ("conftest.out", "w"); return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF ac_clean_files="$ac_clean_files conftest.out" # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } if test "$cross_compiling" != yes; then { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if { ac_try='./conftest$ac_cv_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details" "$LINENO" 5; } fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if ${ac_cv_objext+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of object files: cannot compile See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 $as_echo_n "checking whether $CC understands -c and -o together... " >&6; } if ${am_cv_prog_cc_c_o+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF # Make sure it works both with $CC and with simple cc. # Following AC_PROG_CC_C_O, we do the test twice because some # compilers refuse to overwrite an existing .o file with -o, # though they will create one. am_cv_prog_cc_c_o=yes for am_i in 1 2; do if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } \ && test -f conftest2.$ac_objext; then : OK else am_cv_prog_cc_c_o=no break fi done rm -f core conftest* unset am_i fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 $as_echo "$am_cv_prog_cc_c_o" >&6; } if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5 $as_echo_n "checking whether ${MAKE-make} supports the include directive... " >&6; } cat > confinc.mk << 'END' am__doit: @echo this is the am__doit target >confinc.out .PHONY: am__doit END am__include="#" am__quote= # BSD make does it like this. echo '.include "confinc.mk" # ignored' > confmf.BSD # Other make implementations (GNU, Solaris 10, AIX) do it like this. echo 'include confinc.mk # ignored' > confmf.GNU _am_result=no for s in GNU BSD; do { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5 (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } case $?:`cat confinc.out 2>/dev/null` in #( '0:this is the am__doit target') : case $s in #( BSD) : am__include='.include' am__quote='"' ;; #( *) : am__include='include' am__quote='' ;; esac ;; #( *) : ;; esac if test "$am__include" != "#"; then _am_result="yes ($s style)" break fi done rm -f confinc.* confmf.* { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5 $as_echo "${_am_result}" >&6; } # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if ${am_cv_CC_dependencies_compiler_type+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 $as_echo_n "checking whether ln -s works... " >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 $as_echo "no, using $LN_S" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering ...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi case `pwd` in *\ * | *\ *) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 $as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; esac macro_version='2.4.6' macro_revision='2.4.6' ltmain=$ac_aux_dir/ltmain.sh { $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } if ${ac_cv_host+:} false; then : $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; *) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' set x $ac_cv_host shift host_cpu=$1 host_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: host_os=$* IFS=$ac_save_IFS case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac # Backslashify metacharacters that are still active within # double-quoted strings. sed_quote_subst='s/\(["`$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 $as_echo_n "checking how to print strings... " >&6; } # Test print first, because it will be a builtin if present. if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='print -r --' elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='printf %s\n' else # Use this function as a fallback that always works. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $1 _LTECHO_EOF' } ECHO='func_fallback_echo' fi # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "" } case $ECHO in printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 $as_echo "printf" >&6; } ;; print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 $as_echo "print -r" >&6; } ;; *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 $as_echo "cat" >&6; } ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 $as_echo_n "checking for a sed that does not truncate output... " >&6; } if ${ac_cv_path_SED+:} false; then : $as_echo_n "(cached) " >&6 else ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ for ac_i in 1 2 3 4 5 6 7; do ac_script="$ac_script$as_nl$ac_script" done echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed { ac_script=; unset ac_script;} if test -z "$SED"; then ac_path_SED_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_SED" || continue # Check for GNU ac_path_SED and select it if it is found. # Check for GNU $ac_path_SED case `"$ac_path_SED" --version 2>&1` in *GNU*) ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo '' >> "conftest.nl" "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_SED_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_SED="$ac_path_SED" ac_path_SED_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_SED_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_SED"; then as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 fi else ac_cv_path_SED=$SED fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 $as_echo "$ac_cv_path_SED" >&6; } SED="$ac_cv_path_SED" rm -f conftest.sed test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if ${ac_cv_path_GREP+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_GREP" || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if ${ac_cv_path_EGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_EGREP" || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 $as_echo_n "checking for fgrep... " >&6; } if ${ac_cv_path_FGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 then ac_cv_path_FGREP="$GREP -F" else if test -z "$FGREP"; then ac_path_FGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in fgrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_FGREP" || continue # Check for GNU ac_path_FGREP and select it if it is found. # Check for GNU $ac_path_FGREP case `"$ac_path_FGREP" --version 2>&1` in *GNU*) ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'FGREP' >> "conftest.nl" "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_FGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_FGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_FGREP"; then as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_FGREP=$FGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 $as_echo "$ac_cv_path_FGREP" >&6; } FGREP="$ac_cv_path_FGREP" test -z "$GREP" && GREP=grep # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test yes = "$GCC"; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return, which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD=$ac_prog ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test yes = "$with_gnu_ld"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi if ${lt_cv_path_LD+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$LD"; then lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD=$ac_dir/$ac_prog # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } if ${lt_cv_prog_gnu_ld+:} false; then : $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } if ${lt_cv_path_NM+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM=$NM else lt_nm_to_check=${ac_tool_prefix}nm if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. tmp_nm=$ac_dir/$lt_tmp_nm if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then # Check to see if the nm accepts a BSD-compat flag. # Adding the 'sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty case $build_os in mingw*) lt_bad_file=conftest.nm/nofile ;; *) lt_bad_file=/dev/null ;; esac case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in *$lt_bad_file* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break 2 ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break 2 ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS=$lt_save_ifs done : ${lt_cv_path_NM=no} fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 $as_echo "$lt_cv_path_NM" >&6; } if test no != "$lt_cv_path_NM"; then NM=$lt_cv_path_NM else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : # Let the user override the test. else if test -n "$ac_tool_prefix"; then for ac_prog in dumpbin "link -dump" do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DUMPBIN+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DUMPBIN"; then ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DUMPBIN=$ac_cv_prog_DUMPBIN if test -n "$DUMPBIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 $as_echo "$DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$DUMPBIN" && break done fi if test -z "$DUMPBIN"; then ac_ct_DUMPBIN=$DUMPBIN for ac_prog in dumpbin "link -dump" do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DUMPBIN"; then ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN if test -n "$ac_ct_DUMPBIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 $as_echo "$ac_ct_DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_DUMPBIN" && break done if test "x$ac_ct_DUMPBIN" = x; then DUMPBIN=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DUMPBIN=$ac_ct_DUMPBIN fi fi case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in *COFF*) DUMPBIN="$DUMPBIN -symbols -headers" ;; *) DUMPBIN=: ;; esac fi if test : != "$DUMPBIN"; then NM=$DUMPBIN fi fi test -z "$NM" && NM=nm { $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 $as_echo_n "checking the name lister ($NM) interface... " >&6; } if ${lt_cv_nm_interface+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&5 (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&5 (eval echo "\"\$as_me:$LINENO: output\"" >&5) cat conftest.out >&5 if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 $as_echo "$lt_cv_nm_interface" >&6; } # find the maximum length of command line arguments { $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 $as_echo_n "checking the maximum length of command line arguments... " >&6; } if ${lt_cv_sys_max_cmd_len+:} false; then : $as_echo_n "(cached) " >&6 else i=0 teststring=ABCD case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; mint*) # On MiNT this can take a long time and run out of memory. lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; os2*) # The test takes a long time on OS/2. lt_cv_sys_max_cmd_len=8192 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len" && \ test undefined != "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test X`env echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && test 17 != "$i" # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac fi if test -n "$lt_cv_sys_max_cmd_len"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 $as_echo "$lt_cv_sys_max_cmd_len" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 $as_echo "none" >&6; } fi max_cmd_len=$lt_cv_sys_max_cmd_len : ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 $as_echo_n "checking how to convert $build file names to $host format... " >&6; } if ${lt_cv_to_host_file_cmd+:} false; then : $as_echo_n "(cached) " >&6 else case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ;; esac ;; *-*-cygwin* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_noop ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ;; esac ;; * ) # unhandled hosts (and "normal" native builds) lt_cv_to_host_file_cmd=func_convert_file_noop ;; esac fi to_host_file_cmd=$lt_cv_to_host_file_cmd { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 $as_echo "$lt_cv_to_host_file_cmd" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 $as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } if ${lt_cv_to_tool_file_cmd+:} false; then : $as_echo_n "(cached) " >&6 else #assume ordinary cross tools, or native build. lt_cv_to_tool_file_cmd=func_convert_file_noop case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ;; esac ;; esac fi to_tool_file_cmd=$lt_cv_to_tool_file_cmd { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 $as_echo "$lt_cv_to_tool_file_cmd" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 $as_echo_n "checking for $LD option to reload object files... " >&6; } if ${lt_cv_ld_reload_flag+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_reload_flag='-r' fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 $as_echo "$lt_cv_ld_reload_flag" >&6; } reload_flag=$lt_cv_ld_reload_flag case $reload_flag in "" | " "*) ;; *) reload_flag=" $reload_flag" ;; esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in cygwin* | mingw* | pw32* | cegcc*) if test yes != "$GCC"; then reload_cmds=false fi ;; darwin*) if test yes = "$GCC"; then reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs' else reload_cmds='$LD$reload_flag -o $output$reload_objs' fi ;; esac if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OBJDUMP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OBJDUMP"; then ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OBJDUMP=$ac_cv_prog_OBJDUMP if test -n "$OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 $as_echo "$OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OBJDUMP"; then ac_ct_OBJDUMP=$OBJDUMP # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OBJDUMP"; then ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OBJDUMP="objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP if test -n "$ac_ct_OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 $as_echo "$ac_ct_OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OBJDUMP" = x; then OBJDUMP="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OBJDUMP=$ac_ct_OBJDUMP fi else OBJDUMP="$ac_cv_prog_OBJDUMP" fi test -z "$OBJDUMP" && OBJDUMP=objdump { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 $as_echo_n "checking how to recognize dependent libraries... " >&6; } if ${lt_cv_deplibs_check_method+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # 'unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # that responds to the $file_magic_cmd with a given extended regex. # If you have 'file' or equivalent on your system and you're not sure # whether 'pass_all' will *always* work, you probably want this one. case $host_os in aix[4-9]*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi[45]*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin*) # func_win32_libid is a shell function defined in ltmain.sh lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' ;; mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. if ( file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else # Keep this pattern in sync with the one in func_win32_libid. lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc*) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; haiku*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[3-9]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd* | bitrig*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; os2*) lt_cv_deplibs_check_method=pass_all ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 $as_echo "$lt_cv_deplibs_check_method" >&6; } file_magic_glob= want_nocaseglob=no if test "$build" = "$host"; then case $host_os in mingw* | pw32*) if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then want_nocaseglob=yes else file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` fi ;; esac fi file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ac_tool_prefix}dlltool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DLLTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DLLTOOL"; then ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DLLTOOL=$ac_cv_prog_DLLTOOL if test -n "$DLLTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 $as_echo "$DLLTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DLLTOOL"; then ac_ct_DLLTOOL=$DLLTOOL # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DLLTOOL"; then ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DLLTOOL="dlltool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL if test -n "$ac_ct_DLLTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 $as_echo "$ac_ct_DLLTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DLLTOOL" = x; then DLLTOOL="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DLLTOOL=$ac_ct_DLLTOOL fi else DLLTOOL="$ac_cv_prog_DLLTOOL" fi test -z "$DLLTOOL" && DLLTOOL=dlltool { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 $as_echo_n "checking how to associate runtime and link libraries... " >&6; } if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_sharedlib_from_linklib_cmd='unknown' case $host_os in cygwin* | mingw* | pw32* | cegcc*) # two different shell functions defined in ltmain.sh; # decide which one to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ;; *) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ;; esac ;; *) # fallback: assume linklib IS sharedlib lt_cv_sharedlib_from_linklib_cmd=$ECHO ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 $as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO if test -n "$ac_tool_prefix"; then for ac_prog in ar do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_AR+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$AR"; then ac_cv_prog_AR="$AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AR="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 $as_echo "$AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AR" && break done fi if test -z "$AR"; then ac_ct_AR=$AR for ac_prog in ar do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_AR+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_AR"; then ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_AR="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 $as_echo "$ac_ct_AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_AR" && break done if test "x$ac_ct_AR" = x; then AR="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac AR=$ac_ct_AR fi fi : ${AR=ar} : ${AR_FLAGS=cr} { $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 $as_echo_n "checking for archiver @FILE support... " >&6; } if ${lt_cv_ar_at_file+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ar_at_file=no cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : echo conftest.$ac_objext > conftest.lst lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 (eval $lt_ar_try) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if test 0 -eq "$ac_status"; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 (eval $lt_ar_try) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if test 0 -ne "$ac_status"; then lt_cv_ar_at_file=@ fi fi rm -f conftest.* libconftest.a fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 $as_echo "$lt_cv_ar_at_file" >&6; } if test no = "$lt_cv_ar_at_file"; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi test -z "$STRIP" && STRIP=: if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 $as_echo "$RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_RANLIB="ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 $as_echo "$ac_ct_RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_RANLIB" = x; then RANLIB=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac RANLIB=$ac_ct_RANLIB fi else RANLIB="$ac_cv_prog_RANLIB" fi test -z "$RANLIB" && RANLIB=: # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in bitrig* | openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" fi case $host_os in darwin*) lock_old_archive_extraction=yes ;; *) lock_old_archive_extraction=no ;; esac # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Check for command to grab the raw symbol name followed by C symbol from nm. { $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } if ${lt_cv_sys_global_symbol_pipe+:} false; then : $as_echo_n "(cached) " >&6 else # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[BCDEGRST]' # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[BCDT]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[ABCDGISTW]' ;; hpux*) if test ia64 = "$host_cpu"; then symcode='[ABCDEGRST]' fi ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; osf*) symcode='[BCDEGQRST]' ;; solaris*) symcode='[BDRT]' ;; sco3.2v5*) symcode='[DT]' ;; sysv4.2uw2*) symcode='[DT]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[ABDT]' ;; sysv4) symcode='[DFNSTU]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[ABCDGIRSTW]' ;; esac if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Gets list of data symbols to import. lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" # Adjust the below global symbol transforms to fixup imported variables. lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" lt_c_name_lib_hook="\ -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" else # Disable hooks by default. lt_cv_sys_global_symbol_to_import= lt_cdecl_hook= lt_c_name_hook= lt_c_name_lib_hook= fi # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n"\ $lt_cdecl_hook\ " -e 's/^T .* \(.*\)$/extern int \1();/p'"\ " -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ $lt_c_name_hook\ " -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ " -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" # Transform an extracted symbol line into symbol name with lib prefix and # symbol address. lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ $lt_c_name_lib_hook\ " -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ " -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ " -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function, # D for any global variable and I for any imported variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK '"\ " {last_section=section; section=\$ 3};"\ " /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ " /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ " /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ " {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ " s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then # Now try to grab the symbols. nlist=conftest.nm $ECHO "$as_me:$LINENO: $NM conftest.$ac_objext | $lt_cv_sys_global_symbol_pipe > $nlist" >&5 if eval "$NM" conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist 2>&5 && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE /* DATA imports from DLLs on WIN32 can't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST #elif defined __osf__ /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ LT_DLSYM_CONST struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS LIBS=conftstm.$ac_objext CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest$ac_exeext; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS CFLAGS=$lt_globsym_save_CFLAGS else echo "cannot find nm_test_func in $nlist" >&5 fi else echo "cannot find nm_test_var in $nlist" >&5 fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 fi else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test yes = "$pipe_works"; then break else lt_cv_sys_global_symbol_pipe= fi done fi if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 $as_echo "failed" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 $as_echo "ok" >&6; } fi # Response file support. if test "$lt_cv_nm_interface" = "MS dumpbin"; then nm_file_list_spec='@' elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then nm_file_list_spec='@' fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 $as_echo_n "checking for sysroot... " >&6; } # Check whether --with-sysroot was given. if test "${with_sysroot+set}" = set; then : withval=$with_sysroot; else with_sysroot=no fi lt_sysroot= case $with_sysroot in #( yes) if test yes = "$GCC"; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( /*) lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` ;; #( no|'') ;; #( *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5 $as_echo "$with_sysroot" >&6; } as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 $as_echo "${lt_sysroot:-no}" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5 $as_echo_n "checking for a working dd... " >&6; } if ${ac_cv_path_lt_DD+:} false; then : $as_echo_n "(cached) " >&6 else printf 0123456789abcdef0123456789abcdef >conftest.i cat conftest.i conftest.i >conftest2.i : ${lt_DD:=$DD} if test -z "$lt_DD"; then ac_path_lt_DD_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in dd; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_lt_DD" || continue if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then cmp -s conftest.i conftest.out \ && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: fi $ac_path_lt_DD_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_lt_DD"; then : fi else ac_cv_path_lt_DD=$lt_DD fi rm -f conftest.i conftest2.i conftest.out fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5 $as_echo "$ac_cv_path_lt_DD" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5 $as_echo_n "checking how to truncate binary pipes... " >&6; } if ${lt_cv_truncate_bin+:} false; then : $as_echo_n "(cached) " >&6 else printf 0123456789abcdef0123456789abcdef >conftest.i cat conftest.i conftest.i >conftest2.i lt_cv_truncate_bin= if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then cmp -s conftest.i conftest.out \ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" fi rm -f conftest.i conftest2.i conftest.out test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5 $as_echo "$lt_cv_truncate_bin" >&6; } # Calculate cc_basename. Skip known compiler wrappers and cross-prefix. func_cc_basename () { for cc_temp in $*""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` } # Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then : enableval=$enable_libtool_lock; fi test no = "$enable_libtool_lock" || enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out what ABI is being produced by ac_compile, and set mode # options accordingly. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE=32 ;; *ELF-64*) HPUX_IA64_MODE=64 ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out what ABI is being produced by ac_compile, and set linker # options accordingly. echo '#line '$LINENO' "configure"' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then if test yes = "$lt_cv_prog_gnu_ld"; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; mips64*-*linux*) # Find out what ABI is being produced by ac_compile, and set linker # options accordingly. echo '#line '$LINENO' "configure"' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then emul=elf case `/usr/bin/file conftest.$ac_objext` in *32-bit*) emul="${emul}32" ;; *64-bit*) emul="${emul}64" ;; esac case `/usr/bin/file conftest.$ac_objext` in *MSB*) emul="${emul}btsmip" ;; *LSB*) emul="${emul}ltsmip" ;; esac case `/usr/bin/file conftest.$ac_objext` in *N32*) emul="${emul}n32" ;; esac LD="${LD-ld} -m $emul" fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out what ABI is being produced by ac_compile, and set linker # options accordingly. Note that the listed cases only cover the # situations where additional linker options are needed (such as when # doing 32-bit compilation for a host where ld defaults to 64-bit, or # vice versa); the common cases where no linker options are needed do # not appear in the list. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) case `/usr/bin/file conftest.o` in *x86-64*) LD="${LD-ld} -m elf32_x86_64" ;; *) LD="${LD-ld} -m elf_i386" ;; esac ;; powerpc64le-*linux*) LD="${LD-ld} -m elf32lppclinux" ;; powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; powerpcle-*linux*) LD="${LD-ld} -m elf64lppc" ;; powerpc-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS=$CFLAGS CFLAGS="$CFLAGS -belf" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 $as_echo_n "checking whether the C compiler needs -belf... " >&6; } if ${lt_cv_cc_needs_belf+:} false; then : $as_echo_n "(cached) " >&6 else ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_cc_needs_belf=yes else lt_cv_cc_needs_belf=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 $as_echo "$lt_cv_cc_needs_belf" >&6; } if test yes != "$lt_cv_cc_needs_belf"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS=$SAVE_CFLAGS fi ;; *-*solaris*) # Find out what ABI is being produced by ac_compile, and set linker # options accordingly. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) case $host in i?86-*-solaris*|x86_64-*-solaris*) LD="${LD-ld} -m elf_x86_64" ;; sparc*-*-solaris*) LD="${LD-ld} -m elf64_sparc" ;; esac # GNU ld 2.21 introduced _sol2 emulations. Use them if available. if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then LD=${LD-ld}_sol2 fi ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks=$enable_libtool_lock if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. set dummy ${ac_tool_prefix}mt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$MANIFEST_TOOL"; then ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL if test -n "$MANIFEST_TOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 $as_echo "$MANIFEST_TOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_MANIFEST_TOOL"; then ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL # Extract the first word of "mt", so it can be a program name with args. set dummy mt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_MANIFEST_TOOL"; then ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL if test -n "$ac_ct_MANIFEST_TOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 $as_echo "$ac_ct_MANIFEST_TOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_MANIFEST_TOOL" = x; then MANIFEST_TOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL fi else MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" fi test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 $as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } if ${lt_cv_path_mainfest_tool+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_path_mainfest_tool=no echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out cat conftest.err >&5 if $GREP 'Manifest Tool' conftest.out > /dev/null; then lt_cv_path_mainfest_tool=yes fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 $as_echo "$lt_cv_path_mainfest_tool" >&6; } if test yes != "$lt_cv_path_mainfest_tool"; then MANIFEST_TOOL=: fi case $host_os in rhapsody* | darwin*) if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DSYMUTIL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DSYMUTIL"; then ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DSYMUTIL=$ac_cv_prog_DSYMUTIL if test -n "$DSYMUTIL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 $as_echo "$DSYMUTIL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DSYMUTIL"; then ac_ct_DSYMUTIL=$DSYMUTIL # Extract the first word of "dsymutil", so it can be a program name with args. set dummy dsymutil; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DSYMUTIL"; then ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL if test -n "$ac_ct_DSYMUTIL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 $as_echo "$ac_ct_DSYMUTIL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DSYMUTIL" = x; then DSYMUTIL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DSYMUTIL=$ac_ct_DSYMUTIL fi else DSYMUTIL="$ac_cv_prog_DSYMUTIL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. set dummy ${ac_tool_prefix}nmedit; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_NMEDIT+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$NMEDIT"; then ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi NMEDIT=$ac_cv_prog_NMEDIT if test -n "$NMEDIT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 $as_echo "$NMEDIT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_NMEDIT"; then ac_ct_NMEDIT=$NMEDIT # Extract the first word of "nmedit", so it can be a program name with args. set dummy nmedit; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_NMEDIT"; then ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_NMEDIT="nmedit" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT if test -n "$ac_ct_NMEDIT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 $as_echo "$ac_ct_NMEDIT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_NMEDIT" = x; then NMEDIT=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac NMEDIT=$ac_ct_NMEDIT fi else NMEDIT="$ac_cv_prog_NMEDIT" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. set dummy ${ac_tool_prefix}lipo; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_LIPO+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$LIPO"; then ac_cv_prog_LIPO="$LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_LIPO="${ac_tool_prefix}lipo" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi LIPO=$ac_cv_prog_LIPO if test -n "$LIPO"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 $as_echo "$LIPO" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_LIPO"; then ac_ct_LIPO=$LIPO # Extract the first word of "lipo", so it can be a program name with args. set dummy lipo; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_LIPO+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_LIPO"; then ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_LIPO="lipo" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO if test -n "$ac_ct_LIPO"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 $as_echo "$ac_ct_LIPO" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_LIPO" = x; then LIPO=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac LIPO=$ac_ct_LIPO fi else LIPO="$ac_cv_prog_LIPO" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. set dummy ${ac_tool_prefix}otool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL"; then ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OTOOL="${ac_tool_prefix}otool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL=$ac_cv_prog_OTOOL if test -n "$OTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 $as_echo "$OTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL"; then ac_ct_OTOOL=$OTOOL # Extract the first word of "otool", so it can be a program name with args. set dummy otool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL"; then ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OTOOL="otool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL if test -n "$ac_ct_OTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 $as_echo "$ac_ct_OTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL" = x; then OTOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL=$ac_ct_OTOOL fi else OTOOL="$ac_cv_prog_OTOOL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. set dummy ${ac_tool_prefix}otool64; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OTOOL64+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL64"; then ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL64=$ac_cv_prog_OTOOL64 if test -n "$OTOOL64"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 $as_echo "$OTOOL64" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL64"; then ac_ct_OTOOL64=$OTOOL64 # Extract the first word of "otool64", so it can be a program name with args. set dummy otool64; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL64"; then ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OTOOL64="otool64" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 if test -n "$ac_ct_OTOOL64"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 $as_echo "$ac_ct_OTOOL64" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL64" = x; then OTOOL64=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL64=$ac_ct_OTOOL64 fi else OTOOL64="$ac_cv_prog_OTOOL64" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 $as_echo_n "checking for -single_module linker flag... " >&6; } if ${lt_cv_apple_cc_single_mod+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_apple_cc_single_mod=no if test -z "$LT_MULTI_MODULE"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&5 $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? # If there is a non-empty error log, and "single_module" # appears in it, assume the flag caused a linker warning if test -s conftest.err && $GREP single_module conftest.err; then cat conftest.err >&5 # Otherwise, if the output was created with a 0 exit code from # the compiler, it worked. elif test -f libconftest.dylib && test 0 = "$_lt_result"; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&5 fi rm -rf libconftest.dylib* rm -f conftest.* fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 $as_echo "$lt_cv_apple_cc_single_mod" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } if ${lt_cv_ld_exported_symbols_list+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_ld_exported_symbols_list=yes else lt_cv_ld_exported_symbols_list=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 $as_echo "$lt_cv_ld_exported_symbols_list" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 $as_echo_n "checking for -force_load linker flag... " >&6; } if ${lt_cv_ld_force_load+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_force_load=no cat > conftest.c << _LT_EOF int forced_loaded() { return 2;} _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 echo "$AR cr libconftest.a conftest.o" >&5 $AR cr libconftest.a conftest.o 2>&5 echo "$RANLIB libconftest.a" >&5 $RANLIB libconftest.a 2>&5 cat > conftest.c << _LT_EOF int main() { return 0;} _LT_EOF echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err _lt_result=$? if test -s conftest.err && $GREP force_load conftest.err; then cat conftest.err >&5 elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then lt_cv_ld_force_load=yes else cat conftest.err >&5 fi rm -f conftest.err libconftest.a conftest conftest.c rm -rf conftest.dSYM fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 $as_echo "$lt_cv_ld_force_load" >&6; } case $host_os in rhapsody* | darwin1.[012]) _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[91]*) _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; 10.[012][,.]*) _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test yes = "$lt_cv_apple_cc_single_mod"; then _lt_dar_single_mod='$single_module' fi if test yes = "$lt_cv_ld_exported_symbols_list"; then _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' fi if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac # func_munge_path_list VARIABLE PATH # ----------------------------------- # VARIABLE is name of variable containing _space_ separated list of # directories to be munged by the contents of PATH, which is string # having a format: # "DIR[:DIR]:" # string "DIR[ DIR]" will be prepended to VARIABLE # ":DIR[:DIR]" # string "DIR[ DIR]" will be appended to VARIABLE # "DIRP[:DIRP]::[DIRA:]DIRA" # string "DIRP[ DIRP]" will be prepended to VARIABLE and string # "DIRA[ DIRA]" will be appended to VARIABLE # "DIR[:DIR]" # VARIABLE will be replaced by "DIR[ DIR]" func_munge_path_list () { case x$2 in x) ;; *:) eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" ;; x:*) eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" ;; *::*) eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" ;; *) eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" ;; esac } ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if ${ac_cv_prog_CPP+:} false; then : $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details" "$LINENO" 5; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if ${ac_cv_header_stdc+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default " if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in dlfcn.h do : ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default " if test "x$ac_cv_header_dlfcn_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_DLFCN_H 1 _ACEOF fi done # Set options enable_dlopen=no enable_win32_dll=no # Check whether --enable-shared was given. if test "${enable_shared+set}" = set; then : enableval=$enable_shared; p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS=$lt_save_ifs ;; esac else enable_shared=yes fi # Check whether --enable-static was given. if test "${enable_static+set}" = set; then : enableval=$enable_static; p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS=$lt_save_ifs ;; esac else enable_static=yes fi # Check whether --with-pic was given. if test "${with_pic+set}" = set; then : withval=$with_pic; lt_p=${PACKAGE-default} case $withval in yes|no) pic_mode=$withval ;; *) pic_mode=default # Look at the argument we got. We use all the common list separators. lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for lt_pkg in $withval; do IFS=$lt_save_ifs if test "X$lt_pkg" = "X$lt_p"; then pic_mode=yes fi done IFS=$lt_save_ifs ;; esac else pic_mode=default fi # Check whether --enable-fast-install was given. if test "${enable_fast_install+set}" = set; then : enableval=$enable_fast_install; p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS=$lt_save_ifs ;; esac else enable_fast_install=yes fi shared_archive_member_spec= case $host,$enable_shared in power*-*-aix[5-9]*,yes) { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5 $as_echo_n "checking which variant of shared library versioning to provide... " >&6; } # Check whether --with-aix-soname was given. if test "${with_aix_soname+set}" = set; then : withval=$with_aix_soname; case $withval in aix|svr4|both) ;; *) as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5 ;; esac lt_cv_with_aix_soname=$with_aix_soname else if ${lt_cv_with_aix_soname+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_with_aix_soname=aix fi with_aix_soname=$lt_cv_with_aix_soname fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5 $as_echo "$with_aix_soname" >&6; } if test aix != "$with_aix_soname"; then # For the AIX way of multilib, we name the shared archive member # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, # the AIX toolchain works better with OBJECT_MODE set (default 32). if test 64 = "${OBJECT_MODE-32}"; then shared_archive_member_spec=shr_64 else shared_archive_member_spec=shr fi fi ;; *) with_aix_soname=aix ;; esac # This can be used to rebuild libtool when needed LIBTOOL_DEPS=$ltmain # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' test -z "$LN_S" && LN_S="ln -s" if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 $as_echo_n "checking for objdir... " >&6; } if ${lt_cv_objdir+:} false; then : $as_echo_n "(cached) " >&6 else rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 $as_echo "$lt_cv_objdir" >&6; } objdir=$lt_cv_objdir cat >>confdefs.h <<_ACEOF #define LT_OBJDIR "$lt_cv_objdir/" _ACEOF case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a '.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld=$lt_cv_prog_gnu_ld old_CC=$CC old_CFLAGS=$CFLAGS # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o func_cc_basename $compiler cc_basename=$func_cc_basename_result # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } if ${lt_cv_path_MAGIC_CMD+:} false; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD=$MAGIC_CMD lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/${ac_tool_prefix}file"; then lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD=$lt_cv_path_MAGIC_CMD if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS=$lt_save_ifs MAGIC_CMD=$lt_save_MAGIC_CMD ;; esac fi MAGIC_CMD=$lt_cv_path_MAGIC_CMD if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 $as_echo_n "checking for file... " >&6; } if ${lt_cv_path_MAGIC_CMD+:} false; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD=$MAGIC_CMD lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/file"; then lt_cv_path_MAGIC_CMD=$ac_dir/"file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD=$lt_cv_path_MAGIC_CMD if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS=$lt_save_ifs MAGIC_CMD=$lt_save_MAGIC_CMD ;; esac fi MAGIC_CMD=$lt_cv_path_MAGIC_CMD if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi else MAGIC_CMD=: fi fi fi ;; esac # Use C for the default configuration in the libtool script lt_save_CC=$CC ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o objext=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then lt_prog_compiler_no_builtin_flag= if test yes = "$GCC"; then case $cc_basename in nvcc*) lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; *) lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_rtti_exceptions=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" else : fi fi lt_prog_compiler_wl= lt_prog_compiler_pic= lt_prog_compiler_static= if test yes = "$GCC"; then lt_prog_compiler_wl='-Wl,' lt_prog_compiler_static='-static' case $host_os in aix*) # All AIX code is PIC. if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' fi lt_prog_compiler_pic='-fPIC' ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support lt_prog_compiler_pic='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the '-m68020' flag to GCC prevents building anything better, # like '-m68040'. lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic='-DDLL_EXPORT' case $host_os in os2*) lt_prog_compiler_static='$wl-static' ;; esac ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic='-fno-common' ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. lt_prog_compiler_static= ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) lt_prog_compiler_pic='-fPIC' ;; esac ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. lt_prog_compiler_can_build_shared=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic=-Kconform_pic fi ;; *) lt_prog_compiler_pic='-fPIC' ;; esac case $cc_basename in nvcc*) # Cuda Compiler Driver 2.2 lt_prog_compiler_wl='-Xlinker ' if test -n "$lt_prog_compiler_pic"; then lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" fi ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) lt_prog_compiler_wl='-Wl,' if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' else lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' fi ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic='-fno-common' case $cc_basename in nagfor*) # NAG Fortran compiler lt_prog_compiler_wl='-Wl,-Wl,,' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; esac ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic='-DDLL_EXPORT' case $host_os in os2*) lt_prog_compiler_static='$wl-static' ;; esac ;; hpux9* | hpux10* | hpux11*) lt_prog_compiler_wl='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? lt_prog_compiler_static='$wl-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) lt_prog_compiler_wl='-Wl,' # PIC (with -KPIC) is the default. lt_prog_compiler_static='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in # old Intel for x86_64, which still supported -KPIC. ecc*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-static' ;; # flang / f18. f95 an alias for gfortran or flang on Debian flang* | f18* | f95*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; # Lahey Fortran 8.1. lf95*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='--shared' lt_prog_compiler_static='--static' ;; nagfor*) # NAG Fortran compiler lt_prog_compiler_wl='-Wl,-Wl,,' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; tcc*) # Fabrice Bellard et al's Tiny C Compiler lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' ;; ccc*) lt_prog_compiler_wl='-Wl,' # All Alpha code is PIC. lt_prog_compiler_static='-non_shared' ;; xl* | bgxl* | bgf* | mpixl*) # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-qpic' lt_prog_compiler_static='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) # Sun Fortran 8.3 passes all unrecognized flags to the linker lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='' ;; *Sun\ F* | *Sun*Fortran*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Qoption ld ' ;; *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Wl,' ;; *Intel*\ [CF]*Compiler*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; *Portland\ Group*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' ;; esac ;; esac ;; newsos6) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; osf3* | osf4* | osf5*) lt_prog_compiler_wl='-Wl,' # All OSF/1 code is PIC. lt_prog_compiler_static='-non_shared' ;; rdos*) lt_prog_compiler_static='-non_shared' ;; solaris*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' case $cc_basename in f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) lt_prog_compiler_wl='-Qoption ld ';; *) lt_prog_compiler_wl='-Wl,';; esac ;; sunos4*) lt_prog_compiler_wl='-Qoption ld ' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic='-Kconform_pic' lt_prog_compiler_static='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; unicos*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_can_build_shared=no ;; uts4*) lt_prog_compiler_pic='-pic' lt_prog_compiler_static='-Bstatic' ;; *) lt_prog_compiler_can_build_shared=no ;; esac fi case $host_os in # For platforms that do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic= ;; *) lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 $as_echo_n "checking for $compiler option to produce PIC... " >&6; } if ${lt_cv_prog_compiler_pic+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic=$lt_prog_compiler_pic fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 $as_echo "$lt_cv_prog_compiler_pic" >&6; } lt_prog_compiler_pic=$lt_cv_prog_compiler_pic # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } if ${lt_cv_prog_compiler_pic_works+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; } if test yes = "$lt_cv_prog_compiler_pic_works"; then case $lt_prog_compiler_pic in "" | " "*) ;; *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; esac else lt_prog_compiler_pic= lt_prog_compiler_can_build_shared=no fi fi # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } if ${lt_cv_prog_compiler_static_works+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works=no save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works=yes fi else lt_cv_prog_compiler_static_works=yes fi fi $RM -r conftest* LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 $as_echo "$lt_cv_prog_compiler_static_works" >&6; } if test yes = "$lt_cv_prog_compiler_static_works"; then : else lt_prog_compiler_static= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } hard_links=nottested if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test no = "$hard_links"; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } runpath_var= allow_undefined_flag= always_export_symbols=no archive_cmds= archive_expsym_cmds= compiler_needs_object=no enable_shared_with_static_runtimes=no export_dynamic_flag_spec= export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' hardcode_automatic=no hardcode_direct=no hardcode_direct_absolute=no hardcode_libdir_flag_spec= hardcode_libdir_separator= hardcode_minus_L=no hardcode_shlibpath_var=unsupported inherit_rpath=no link_all_deplibs=unknown module_cmds= module_expsym_cmds= old_archive_from_new_cmds= old_archive_from_expsyms_cmds= thread_safe_flag_spec= whole_archive_flag_spec= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ' (' and ')$', so one must not match beginning or # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', # as well as any symbol that contains 'd'. exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test yes != "$GCC"; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd* | bitrig*) with_gnu_ld=no ;; linux* | k*bsd*-gnu | gnu*) link_all_deplibs=no ;; esac ld_shlibs=yes # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no if test yes = "$with_gnu_ld"; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility # with the native linker. However, as the warning in the GNU ld # block says, versions before 2.19.5* couldn't really create working # shared libraries, regardless of the interface used. case `$LD -v 2>&1` in *\ \(GNU\ Binutils\)\ 2.19.5*) ;; *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; *\ \(GNU\ Binutils\)\ [3-9]*) ;; *) lt_use_gnu_ld_interface=yes ;; esac ;; *) lt_use_gnu_ld_interface=yes ;; esac fi if test yes = "$lt_use_gnu_ld_interface"; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='$wl' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' export_dynamic_flag_spec='$wl--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' else whole_archive_flag_spec= fi supports_anon_versioning=no case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken if test ia64 != "$host_cpu"; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.19, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to install binutils *** 2.20 or above, or modify your PATH so that a non-GNU linker is found. *** You will then need to restart the configuration process. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' else ld_shlibs=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' export_dynamic_flag_spec='$wl--export-all-symbols' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file, use it as # is; otherwise, prepend EXPORTS... archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs=no fi ;; haiku*) archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' link_all_deplibs=yes ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported shrext_cmds=.dll archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ $ECHO EXPORTS >> $output_objdir/$libname.def~ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ $ECHO EXPORTS >> $output_objdir/$libname.def~ prefix_cmds="$SED"~ if test EXPORTS = "`$SED 1q $export_symbols`"; then prefix_cmds="$prefix_cmds -e 1d"; fi~ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' enable_shared_with_static_runtimes=yes ;; interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='$wl-rpath,$libdir' export_dynamic_flag_spec='$wl-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test linux-dietlibc = "$host_os"; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test no = "$tmp_diet" then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 whole_archive_flag_spec= tmp_sharedflag='--shared' ;; nagfor*) # NAGFOR 5.3 tmp_sharedflag='-Wl,-shared' ;; xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' compiler_needs_object=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' compiler_needs_object=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' if test yes = "$supports_anon_versioning"; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' fi case $cc_basename in tcc*) export_dynamic_flag_spec='-rdynamic' ;; xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' if test yes = "$supports_anon_versioning"; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else ld_shlibs=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac ;; sunos4*) archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct=yes hardcode_shlibpath_var=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac if test no = "$ld_shlibs"; then runpath_var= hardcode_libdir_flag_spec= export_dynamic_flag_spec= whole_archive_flag_spec= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag=unsupported always_export_symbols=yes archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix[4-9]*) if test ia64 = "$host_cpu"; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag= else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to GNU nm, but means don't demangle to AIX nm. # Without the "-l" option, or with the "-B" option, AIX nm treats # weak defined symbols like other global defined symbols, whereas # GNU nm marks them as "W". # While the 'weak' keyword is ignored in the Export File, we need # it in the Import File for the 'aix-soname' feature, so we have # to replace the "-B" option with "-P" for AIX nm. if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # have runtime linking enabled, and use it for executables. # For shared libraries, we enable/disable runtime linking # depending on the kind of the shared library created - # when "with_aix_soname,aix_use_runtimelinking" is: # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables # "aix,yes" lib.so shared, rtl:yes, for executables # lib.a static archive # "both,no" lib.so.V(shr.o) shared, rtl:yes # lib.a(lib.so.V) shared, rtl:no, for executables # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables # lib.a(lib.so.V) shared, rtl:no # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables # lib.a static archive case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then aix_use_runtimelinking=yes break fi done if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then # With aix-soname=svr4, we create the lib.so.V shared archives only, # so we don't have lib.a shared libs to link our executables. # We have to force runtime linking in this case. aix_use_runtimelinking=yes LDFLAGS="$LDFLAGS -Wl,-brtl" fi ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds='' hardcode_direct=yes hardcode_direct_absolute=yes hardcode_libdir_separator=':' link_all_deplibs=yes file_list_spec='$wl-f,' case $with_aix_soname,$aix_use_runtimelinking in aix,*) ;; # traditional, no import file svr4,* | *,yes) # use import file # The Import File defines what to hardcode. hardcode_direct=no hardcode_direct_absolute=no ;; esac if test yes = "$GCC"; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`$CC -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi ;; esac shared_flag='-shared' if test yes = "$aix_use_runtimelinking"; then shared_flag="$shared_flag "'$wl-G' fi # Need to ensure runtime linking is disabled for the traditional # shared library, or the linker may eventually find shared libraries # /with/ Import File - we do not want to mix them. shared_flag_aix='-shared' shared_flag_svr4='-shared $wl-G' else # not using gcc if test ia64 = "$host_cpu"; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test yes = "$aix_use_runtimelinking"; then shared_flag='$wl-G' else shared_flag='$wl-bM:SRE' fi shared_flag_aix='$wl-bM:SRE' shared_flag_svr4='$wl-G' fi fi export_dynamic_flag_spec='$wl-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols=yes if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an # empty executable. if test set = "${lt_cv_aix_libpath+set}"; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=/usr/lib:/lib fi fi aix_libpath=$lt_cv_aix_libpath_ fi hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag else if test ia64 = "$host_cpu"; then hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. if test set = "${lt_cv_aix_libpath+set}"; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=/usr/lib:/lib fi fi aix_libpath=$lt_cv_aix_libpath_ fi hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag=' $wl-bernotok' allow_undefined_flag=' $wl-berok' if test yes = "$with_gnu_ld"; then # We only use this code for GNU lds that support --whole-archive. whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec='$convenience' fi archive_cmds_need_lc=yes archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' # -brtl affects multiple linker settings, -berok does not and is overridden later compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`' if test svr4 != "$with_aix_soname"; then # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' fi if test aix != "$with_aix_soname"; then archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' else # used by -dlpreopen to get the symbols archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir' fi archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; bsdi[45]*) export_dynamic_flag_spec=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in cl*) # Native MSVC hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported always_export_symbols=yes file_list_spec='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then cp "$export_symbols" "$output_objdir/$soname.def"; echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; else $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, )='true' enable_shared_with_static_runtimes=yes exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' # Don't use ranlib old_postinstall_cmds='chmod 644 $oldlib' postlink_cmds='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile=$lt_outputfile.exe lt_tool_outputfile=$lt_tool_outputfile.exe ;; esac~ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # Assume MSVC wrapper hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_from_new_cmds='true' # FIXME: Should let the user specify the lib program. old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' enable_shared_with_static_runtimes=yes ;; esac ;; darwin* | rhapsody*) archive_cmds_need_lc=no hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported if test yes = "$lt_cv_ld_force_load"; then whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else whole_archive_flag_spec='' fi link_all_deplibs=yes allow_undefined_flag=$_lt_dar_allow_undefined case $cc_basename in ifort*|nagfor*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test yes = "$_lt_dar_can_shared"; then output_verbose_link_cmd=func_echo_all archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" else ld_shlibs=no fi ;; dgux*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2.*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; hpux9*) if test yes = "$GCC"; then archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' else archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' fi hardcode_libdir_flag_spec='$wl+b $wl$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes export_dynamic_flag_spec='$wl-E' ;; hpux10*) if test yes,no = "$GCC,$with_gnu_ld"; then archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test no = "$with_gnu_ld"; then hardcode_libdir_flag_spec='$wl+b $wl$libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='$wl-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes fi ;; hpux11*) if test yes,no = "$GCC,$with_gnu_ld"; then case $host_cpu in hppa*64*) archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) # Older versions of the 11.00 compiler do not understand -b yet # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 $as_echo_n "checking if $CC understands -b... " >&6; } if ${lt_cv_prog_compiler__b+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler__b=no save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS -b" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler__b=yes fi else lt_cv_prog_compiler__b=yes fi fi $RM -r conftest* LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 $as_echo "$lt_cv_prog_compiler__b" >&6; } if test yes = "$lt_cv_prog_compiler__b"; then archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi ;; esac fi if test no = "$with_gnu_ld"; then hardcode_libdir_flag_spec='$wl+b $wl$libdir' hardcode_libdir_separator=: case $host_cpu in hppa*64*|ia64*) hardcode_direct=no hardcode_shlibpath_var=no ;; *) hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='$wl-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test yes = "$GCC"; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. # This should be the same for all languages, so no per-tag cache variable. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 $as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } if ${lt_cv_irix_exported_symbol+:} false; then : $as_echo_n "(cached) " >&6 else save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int foo (void) { return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_irix_exported_symbol=yes else lt_cv_irix_exported_symbol=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 $as_echo "$lt_cv_irix_exported_symbol" >&6; } if test yes = "$lt_cv_irix_exported_symbol"; then archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' fi link_all_deplibs=no else archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' hardcode_libdir_separator=: inherit_rpath=yes link_all_deplibs=yes ;; linux*) case $cc_basename in tcc*) # Fabrice Bellard et al's Tiny C Compiler ld_shlibs=yes archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; *nto* | *qnx*) ;; openbsd* | bitrig*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes hardcode_shlibpath_var=no hardcode_direct_absolute=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec='$wl-rpath,$libdir' export_dynamic_flag_spec='$wl-E' else archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='$wl-rpath,$libdir' fi else ld_shlibs=no fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported shrext_cmds=.dll archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ $ECHO EXPORTS >> $output_objdir/$libname.def~ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ $ECHO EXPORTS >> $output_objdir/$libname.def~ prefix_cmds="$SED"~ if test EXPORTS = "`$SED 1q $export_symbols`"; then prefix_cmds="$prefix_cmds -e 1d"; fi~ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' enable_shared_with_static_runtimes=yes ;; osf3*) if test yes = "$GCC"; then allow_undefined_flag=' $wl-expect_unresolved $wl\*' archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test yes = "$GCC"; then allow_undefined_flag=' $wl-expect_unresolved $wl\*' archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi archive_cmds_need_lc='no' hardcode_libdir_separator=: ;; solaris*) no_undefined_flag=' -z defs' if test yes = "$GCC"; then wlarc='$wl' archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='$wl' archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands '-z linker_flag'. GCC discards it without '$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test yes = "$GCC"; then whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' else whole_archive_flag_spec='-z allextract$convenience -z defaultextract' fi ;; esac link_all_deplibs=yes ;; sunos4*) if test sequent = "$host_vendor"; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; sysv4) case $host_vendor in sni) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' reload_cmds='$CC -r -o $output$reload_objs' hardcode_direct=no ;; motorola) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; sysv4.3*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no export_dynamic_flag_spec='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag='$wl-z,text' archive_cmds_need_lc=no hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' if test yes = "$GCC"; then archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We CANNOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag='$wl-z,text' allow_undefined_flag='$wl-z,nodefs' archive_cmds_need_lc=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='$wl-R,$libdir' hardcode_libdir_separator=':' link_all_deplibs=yes export_dynamic_flag_spec='$wl-Bexport' runpath_var='LD_RUN_PATH' if test yes = "$GCC"; then archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; *) ld_shlibs=no ;; esac if test sni = "$host_vendor"; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) export_dynamic_flag_spec='$wl-Blargedynsym' ;; esac fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 $as_echo "$ld_shlibs" >&6; } test no = "$ld_shlibs" && can_build_shared=no with_gnu_ld=$with_gnu_ld # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc" in x|xyes) # Assume -lc should be added archive_cmds_need_lc=yes if test yes,yes = "$GCC,$enable_shared"; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } if ${lt_cv_archive_cmds_need_lc+:} false; then : $as_echo_n "(cached) " >&6 else $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl pic_flag=$lt_prog_compiler_pic compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag allow_undefined_flag= if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then lt_cv_archive_cmds_need_lc=no else lt_cv_archive_cmds_need_lc=yes fi allow_undefined_flag=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 $as_echo "$lt_cv_archive_cmds_need_lc" >&6; } archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc ;; esac fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } if test yes = "$GCC"; then case $host_os in darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; *) lt_awk_arg='/^libraries:/' ;; esac case $host_os in mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;; *) lt_sed_strip_eq='s|=/|/|g' ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in *\;*) # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` ;; *) lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` ;; esac # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary... lt_tmp_lt_search_path_spec= lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` # ...but if some path component already ends with the multilib dir we assume # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). case "$lt_multi_os_dir; $lt_search_path_spec " in "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) lt_multi_os_dir= ;; esac for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" elif test -n "$lt_multi_os_dir"; then test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' BEGIN {RS = " "; FS = "/|\n";} { lt_foo = ""; lt_count = 0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo = "/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[lt_foo]++; } if (lt_freq[lt_foo] == 1) { print lt_foo; } }'` # AWK program above erroneously prepends '/' to C:/dos/paths # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ $SED 's|/\([A-Za-z]:\)|\1|g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=.so postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$release$shared_ext$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='$libname$release$shared_ext$major' ;; aix[4-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no hardcode_into_libs=yes if test ia64 = "$host_cpu"; then # AIX 5 supports IA64 library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line '#! .'. This would cause the generated library to # depend on '.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # Using Import Files as archive members, it is possible to support # filename-based versioning of shared library archives on AIX. While # this would work for both with and without runtime linking, it will # prevent static linking of such archives. So we do filename-based # shared library versioning with .so extension only, which is used # when both runtime linking and shared linking is enabled. # Unfortunately, runtime linking may impact performance, so we do # not want this to be the default eventually. Also, we use the # versioned .so libs for executables only if there is the -brtl # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. # To allow for filename-based versioning support, we need to create # libNAME.so.V as an archive file, containing: # *) an Import File, referring to the versioned filename of the # archive as well as the shared archive member, telling the # bitwidth (32 or 64) of that shared object, and providing the # list of exported symbols of that shared object, eventually # decorated with the 'weak' keyword # *) the shared object with the F_LOADONLY flag set, to really avoid # it being seen by the linker. # At run time we better use the real file rather than another symlink, # but for link time we create the symlink libNAME.so -> libNAME.so.V case $with_aix_soname,$aix_use_runtimelinking in # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. aix,yes) # traditional libtool dynamic_linker='AIX unversionable lib.so' # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' ;; aix,no) # traditional AIX only dynamic_linker='AIX lib.a(lib.so.V)' # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='$libname$release.a $libname.a' soname_spec='$libname$release$shared_ext$major' ;; svr4,*) # full svr4 only dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)" library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' # We do not specify a path in Import Files, so LIBPATH fires. shlibpath_overrides_runpath=yes ;; *,yes) # both, prefer svr4 dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)" library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' # unpreferred sharedlib libNAME.a needs extra handling postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' # We do not specify a path in Import Files, so LIBPATH fires. shlibpath_overrides_runpath=yes ;; *,no) # both, prefer aix dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)" library_names_spec='$libname$release.a $libname.a' soname_spec='$libname$release$shared_ext$major' # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' ;; esac shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='$libname$shared_ext' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=.dll need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \$file`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' library_names_spec='$libname.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec=$LIB if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \$file`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' soname_spec='$libname$release$major$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[23].*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2.*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; haiku*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=no sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' if test 32 = "$HPUX_IA64_MODE"; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" sys_lib_dlsearch_path_spec=/usr/lib/hpux32 else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" sys_lib_dlsearch_path_spec=/usr/lib/hpux64 fi ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[3-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test yes = "$lt_cv_prog_gnu_ld"; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='$libname$release$shared_ext$major' library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; linux*android*) version_type=none # Android doesn't support versioned libraries. need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext' soname_spec='$libname$release$shared_ext' finish_cmds= shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes dynamic_linker='Android linker' # Don't embed -rpath directories since the linker doesn't support them. hardcode_libdir_flag_spec='-L$libdir' ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH if ${lt_cv_shlibpath_overrides_runpath+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : lt_cv_shlibpath_overrides_runpath=yes fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS libdir=$save_libdir fi shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Ideally, we could use ldconfig to report *all* directores which are # searched for libraries, however this is still not possible. Aside from not # being certain /sbin/ldconfig is available, command # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, # even though it is searched at run-time. Try to do the best guess by # appending ld.so.conf contents (and includes) to the search path. if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd* | bitrig*) version_type=sunos sys_lib_dlsearch_path_spec=/usr/lib need_lib_prefix=no if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then need_version=no else need_version=yes fi library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; os2*) libname_spec='$name' version_type=windows shrext_cmds=.dll need_version=no need_lib_prefix=no # OS/2 can only load a DLL with a base name of 8 characters or less. soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; v=$($ECHO $release$versuffix | tr -d .-); n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); $ECHO $n$v`$shared_ext' library_names_spec='${libname}_dll.$libext' dynamic_linker='OS/2 ld.exe' shlibpath_var=BEGINLIBPATH sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec postinstall_cmds='base_file=`basename \$file`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='$libname$release$shared_ext$major' library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test yes = "$with_gnu_ld"; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec; then version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' soname_spec='$libname$shared_ext.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=sco need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test yes = "$with_gnu_ld"; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test no = "$dynamic_linker" && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test yes = "$GCC"; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec fi if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec fi # remember unaugmented sys_lib_dlsearch_path content for libtool script decls... configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec # ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" # to be used as default LT_SYS_LIBRARY_PATH value in generated libtool configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action= if test -n "$hardcode_libdir_flag_spec" || test -n "$runpath_var" || test yes = "$hardcode_automatic"; then # We can hardcode non-existent directories. if test no != "$hardcode_direct" && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" && test no != "$hardcode_minus_L"; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action=unsupported fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 $as_echo "$hardcode_action" >&6; } if test relink = "$hardcode_action" || test yes = "$inherit_rpath"; then # Fast installation is not supported enable_fast_install=no elif test yes = "$shlibpath_overrides_runpath" || test no = "$enable_shared"; then # Fast installation is not necessary enable_fast_install=needless fi if test yes != "$enable_dlopen"; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen=load_add_on lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen=LoadLibrary lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen=dlopen lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if ${ac_cv_lib_dl_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl else lt_cv_dlopen=dyld lt_cv_dlopen_libs= lt_cv_dlopen_self=yes fi ;; tpf*) # Don't try to run any link tests for TPF. We know it's impossible # because TPF is a cross-compiler, and we know how we open DSOs. lt_cv_dlopen=dlopen lt_cv_dlopen_libs= lt_cv_dlopen_self=no ;; *) ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" if test "x$ac_cv_func_shl_load" = xyes; then : lt_cv_dlopen=shl_load else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 $as_echo_n "checking for shl_load in -ldld... " >&6; } if ${ac_cv_lib_dld_shl_load+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char shl_load (); int main () { return shl_load (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_shl_load=yes else ac_cv_lib_dld_shl_load=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 $as_echo "$ac_cv_lib_dld_shl_load" >&6; } if test "x$ac_cv_lib_dld_shl_load" = xyes; then : lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld else ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" if test "x$ac_cv_func_dlopen" = xyes; then : lt_cv_dlopen=dlopen else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if ${ac_cv_lib_dl_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 $as_echo_n "checking for dlopen in -lsvld... " >&6; } if ${ac_cv_lib_svld_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_svld_dlopen=yes else ac_cv_lib_svld_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 $as_echo "$ac_cv_lib_svld_dlopen" >&6; } if test "x$ac_cv_lib_svld_dlopen" = xyes; then : lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 $as_echo_n "checking for dld_link in -ldld... " >&6; } if ${ac_cv_lib_dld_dld_link+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dld_link (); int main () { return dld_link (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_dld_link=yes else ac_cv_lib_dld_dld_link=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 $as_echo "$ac_cv_lib_dld_dld_link" >&6; } if test "x$ac_cv_lib_dld_dld_link" = xyes; then : lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld fi fi fi fi fi fi ;; esac if test no = "$lt_cv_dlopen"; then enable_dlopen=no else enable_dlopen=yes fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS=$CPPFLAGS test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS=$LDFLAGS wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS=$LIBS LIBS="$lt_cv_dlopen_libs $LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 $as_echo_n "checking whether a program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self+:} false; then : $as_echo_n "(cached) " >&6 else if test yes = "$cross_compiling"; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisibility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; esac else : # compilation failed lt_cv_dlopen_self=no fi fi rm -fr conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 $as_echo "$lt_cv_dlopen_self" >&6; } if test yes = "$lt_cv_dlopen_self"; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self_static+:} false; then : $as_echo_n "(cached) " >&6 else if test yes = "$cross_compiling"; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisibility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; esac else : # compilation failed lt_cv_dlopen_self_static=no fi fi rm -fr conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 $as_echo "$lt_cv_dlopen_self_static" >&6; } fi CPPFLAGS=$save_CPPFLAGS LDFLAGS=$save_LDFLAGS LIBS=$save_LIBS ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi striplib= old_striplib= { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 $as_echo_n "checking whether stripping libraries is possible... " >&6; } if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP"; then striplib="$STRIP -x" old_striplib="$STRIP -S" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi ;; *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } ;; esac fi # Report what library types will actually be built { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 $as_echo_n "checking if libtool supports shared libraries... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 $as_echo "$can_build_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 $as_echo_n "checking whether to build shared libraries... " >&6; } test no = "$can_build_shared" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test yes = "$enable_shared" && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[4-9]*) if test ia64 != "$host_cpu"; then case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in yes,aix,yes) ;; # shared object as lib.so file only yes,svr4,*) ;; # shared object as lib.so archive member only yes,*) enable_static=no ;; # shared object in lib.a archive as well esac fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 $as_echo "$enable_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 $as_echo_n "checking whether to build static libraries... " >&6; } # Make sure either enable_shared or enable_static is yes. test yes = "$enable_shared" || enable_static=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 $as_echo "$enable_static" >&6; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC=$lt_save_CC ac_config_commands="$ac_config_commands libtool" # Only expand once: CFLAGS="$CFLAGS" LIBS="$LDFLAGS $LIBS" for ac_header in strings.h do : ac_fn_c_check_header_mongrel "$LINENO" "strings.h" "ac_cv_header_strings_h" "$ac_includes_default" if test "x$ac_cv_header_strings_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_STRINGS_H 1 _ACEOF GEOTIFF_HAVE_STRINGS_H=1 fi done cat >>confdefs.h <<_ACEOF #define GEOTIFF_HAVE_STRINGS_H 1 _ACEOF for ac_header in stdio.h do : ac_fn_c_check_header_mongrel "$LINENO" "stdio.h" "ac_cv_header_stdio_h" "$ac_includes_default" if test "x$ac_cv_header_stdio_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_STDIO_H 1 _ACEOF else as_fn_error $? "cannot find stdio.h, bailing out" "$LINENO" 5 fi done for ac_header in stdlib.h do : ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default" if test "x$ac_cv_header_stdlib_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_STDLIB_H 1 _ACEOF else as_fn_error $? "cannot find stdlib.h, bailing out" "$LINENO" 5 fi done for ac_header in locale.h do : ac_fn_c_check_header_mongrel "$LINENO" "locale.h" "ac_cv_header_locale_h" "$ac_includes_default" if test "x$ac_cv_header_locale_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_LOCALE_H 1 _ACEOF fi done LIBS="${LIBS}" # Check whether --enable-debug was given. if test "${enable_debug+set}" = set; then : enableval=$enable_debug; fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for debug enabled" >&5 $as_echo_n "checking for debug enabled... " >&6; } if test "x$enable_debug" = "xyes"; then CFLAGS="$CFLAGS -g -DDEBUG -Wall" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else CFLAGS="$CFLAGS -O3 -DNDEBUG" { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for exp in -lm" >&5 $as_echo_n "checking for exp in -lm... " >&6; } if ${ac_cv_lib_m_exp+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lm $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char exp (); int main () { return exp (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_m_exp=yes else ac_cv_lib_m_exp=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_exp" >&5 $as_echo "$ac_cv_lib_m_exp" >&6; } if test "x$ac_cv_lib_m_exp" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_LIBM 1 _ACEOF LIBS="-lm $LIBS" fi # Check whether --with-zip was given. if test "${with_zip+set}" = set; then : withval=$with_zip; fi # Check whether --with-zlib was given. if test "${with_zlib+set}" = set; then : withval=$with_zlib; fi # Check whether --with-libz was given. if test "${with_libz+set}" = set; then : withval=$with_libz; fi HAVE_ZIP="no" ZIP_CONFIG="no" # Implement aliasing... if test "$with_zlib" != "" ; then with_zip=$with_zlib fi if test "$with_libz" != "" ; then with_zip=$with_libz fi if test "$with_zip" != "" -a "x$with_zip" != "xno" ; then for ac_header in zlib.h do : ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default" if test "x$ac_cv_header_zlib_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_ZLIB_H 1 _ACEOF else as_fn_error $? "cannot find zlib.h, bailing out" "$LINENO" 5 fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing inflateInit_" >&5 $as_echo_n "checking for library containing inflateInit_... " >&6; } if ${ac_cv_search_inflateInit_+:} false; then : $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char inflateInit_ (); int main () { return inflateInit_ (); ; return 0; } _ACEOF for ac_lib in '' z; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib -L$with_zip/lib -lm $ac_func_search_save_LIBS" fi if ac_fn_c_try_link "$LINENO"; then : ac_cv_search_inflateInit_=$ac_res fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext if ${ac_cv_search_inflateInit_+:} false; then : break fi done if ${ac_cv_search_inflateInit_+:} false; then : else ac_cv_search_inflateInit_=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_inflateInit_" >&5 $as_echo "$ac_cv_search_inflateInit_" >&6; } ac_res=$ac_cv_search_inflateInit_ if test "$ac_res" != no; then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" ZIP_CONFIG=yes else ZIP_CONFIG=no fi else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for zlib" >&5 $as_echo_n "checking for zlib... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "${ZIP_CONFIG}" != "no" ; then if test "${ZIP_CONFIG}" = "yes" ; then if test -d ${with_zip}/include ; then ZIP_INC="-I$with_zip/include" { $as_echo "$as_me:${as_lineno-$LINENO}: result: using zlib from $with_zip/include" >&5 $as_echo "using zlib from $with_zip/include" >&6; } HAVE_ZLIB="yes" ZIP_CONFIG="yes" LIBS="-L${with_zip}/lib -lz $LIBS" fi fi fi if test ! x$ZIP_CONFIG = xno; then ZIP_IS_CONFIG_TRUE= ZIP_IS_CONFIG_FALSE='#' else ZIP_IS_CONFIG_TRUE='#' ZIP_IS_CONFIG_FALSE= fi # Check whether --with-jpeg was given. if test "${with_jpeg+set}" = set; then : withval=$with_jpeg; fi HAVE_JPEG="no" JPEG_CONFIG="no" if test "$with_jpeg" = "no" -o "$with_jpeg" = "" ; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for jpeg" >&5 $as_echo_n "checking for jpeg... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing jinit_compress_master" >&5 $as_echo_n "checking for library containing jinit_compress_master... " >&6; } if ${ac_cv_search_jinit_compress_master+:} false; then : $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char jinit_compress_master (); int main () { return jinit_compress_master (); ; return 0; } _ACEOF for ac_lib in '' jpeg; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib -L$with_jpeg/lib -lm $ac_func_search_save_LIBS" fi if ac_fn_c_try_link "$LINENO"; then : ac_cv_search_jinit_compress_master=$ac_res fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext if ${ac_cv_search_jinit_compress_master+:} false; then : break fi done if ${ac_cv_search_jinit_compress_master+:} false; then : else ac_cv_search_jinit_compress_master=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_jinit_compress_master" >&5 $as_echo "$ac_cv_search_jinit_compress_master" >&6; } ac_res=$ac_cv_search_jinit_compress_master if test "$ac_res" != no; then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" JPEG_CONFIG=yes else JPEG_CONFIG=no fi fi if test "${JPEG_CONFIG}" != "no" ; then if test "${JPEG_CONFIG}" = "yes" ; then if test -d ${with_jpeg}/include ; then JPEG_INC="-I$with_jpeg/include" LIBS="-L$with_jpeg/lib $LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: result: using jpeg from $with_jpeg/include" >&5 $as_echo "using jpeg from $with_jpeg/include" >&6; } fi fi HAVE_JPEG="yes" JPEG_CONFIG="yes" fi if test ! x$JPEG_CONFIG = xno; then JPEG_IS_CONFIG_TRUE= JPEG_IS_CONFIG_FALSE='#' else JPEG_IS_CONFIG_TRUE='#' JPEG_IS_CONFIG_FALSE= fi TIFF_CONFIG="no" # Check whether --with-libtiff was given. if test "${with_libtiff+set}" = set; then : withval=$with_libtiff; fi if test "$with_libtiff" != "" ; then if test -f $with_libtiff/include/tiffio.h -a -d $with_libtiff/lib ; then LIBS="-L$with_libtiff/lib -ltiff $LIBS" TIFF_INC=-I$with_libtiff/include else LIBS="-L$with_libtiff -ltiff $LIBS" TIFF_INC=-I$with_libtiff fi LIBS_SAVED="$LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TIFFOpen in -ltiff" >&5 $as_echo_n "checking for TIFFOpen in -ltiff... " >&6; } if ${ac_cv_lib_tiff_TIFFOpen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ltiff -lm $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char TIFFOpen (); int main () { return TIFFOpen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_tiff_TIFFOpen=yes else ac_cv_lib_tiff_TIFFOpen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_tiff_TIFFOpen" >&5 $as_echo "$ac_cv_lib_tiff_TIFFOpen" >&6; } if test "x$ac_cv_lib_tiff_TIFFOpen" = xyes; then : TIFF_CONFIG=yes else as_fn_error $? "failed to link with -ltiff to find TIFFOpen" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TIFFMergeFieldInfo in -ltiff" >&5 $as_echo_n "checking for TIFFMergeFieldInfo in -ltiff... " >&6; } if ${ac_cv_lib_tiff_TIFFMergeFieldInfo+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ltiff -lm $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char TIFFMergeFieldInfo (); int main () { return TIFFMergeFieldInfo (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_tiff_TIFFMergeFieldInfo=yes else ac_cv_lib_tiff_TIFFMergeFieldInfo=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_tiff_TIFFMergeFieldInfo" >&5 $as_echo "$ac_cv_lib_tiff_TIFFMergeFieldInfo" >&6; } if test "x$ac_cv_lib_tiff_TIFFMergeFieldInfo" = xyes; then : TIFF_CONFIG=yes else as_fn_error $? "Libtiff 3.6.0 Beta or later required for this version of libgeotiff. Please upgrade or use an older version of libgeotiff." "$LINENO" 5 fi LIBS="$LIBS_SAVED" else if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_PKG_CONFIG+:} false; then : $as_echo_n "(cached) " >&6 else case $PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi PKG_CONFIG=$ac_cv_path_PKG_CONFIG if test -n "$PKG_CONFIG"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 $as_echo "$PKG_CONFIG" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_PKG_CONFIG"; then ac_pt_PKG_CONFIG=$PKG_CONFIG # Extract the first word of "pkg-config", so it can be a program name with args. set dummy pkg-config; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : $as_echo_n "(cached) " >&6 else case $ac_pt_PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG if test -n "$ac_pt_PKG_CONFIG"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 $as_echo "$ac_pt_PKG_CONFIG" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_PKG_CONFIG" = x; then PKG_CONFIG="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac PKG_CONFIG=$ac_pt_PKG_CONFIG fi else PKG_CONFIG="$ac_cv_path_PKG_CONFIG" fi fi if test -n "$PKG_CONFIG"; then _pkg_min_version=0.9.0 { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 $as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } PKG_CONFIG="" fi fi pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBTIFF" >&5 $as_echo_n "checking for LIBTIFF... " >&6; } if test -n "$LIBTIFF_CFLAGS"; then pkg_cv_LIBTIFF_CFLAGS="$LIBTIFF_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libtiff-4\""; } >&5 ($PKG_CONFIG --exists --print-errors "libtiff-4") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_LIBTIFF_CFLAGS=`$PKG_CONFIG --cflags "libtiff-4" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$LIBTIFF_LIBS"; then pkg_cv_LIBTIFF_LIBS="$LIBTIFF_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libtiff-4\""; } >&5 ($PKG_CONFIG --exists --print-errors "libtiff-4") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_LIBTIFF_LIBS=`$PKG_CONFIG --libs "libtiff-4" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then LIBTIFF_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libtiff-4" 2>&1` else LIBTIFF_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libtiff-4" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$LIBTIFF_PKG_ERRORS" >&5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TIFFOpen in -ltiff" >&5 $as_echo_n "checking for TIFFOpen in -ltiff... " >&6; } if ${ac_cv_lib_tiff_TIFFOpen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ltiff -lm $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char TIFFOpen (); int main () { return TIFFOpen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_tiff_TIFFOpen=yes else ac_cv_lib_tiff_TIFFOpen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_tiff_TIFFOpen" >&5 $as_echo "$ac_cv_lib_tiff_TIFFOpen" >&6; } if test "x$ac_cv_lib_tiff_TIFFOpen" = xyes; then : TIFF_CONFIG=yes else as_fn_error $? "You will need to substantially rewrite libxtiff to build libgeotiff without libtiff" "$LINENO" 5 fi LIBS_SAVED="$LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TIFFMergeFieldInfo in -ltiff" >&5 $as_echo_n "checking for TIFFMergeFieldInfo in -ltiff... " >&6; } if ${ac_cv_lib_tiff_TIFFMergeFieldInfo+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ltiff -lm $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char TIFFMergeFieldInfo (); int main () { return TIFFMergeFieldInfo (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_tiff_TIFFMergeFieldInfo=yes else ac_cv_lib_tiff_TIFFMergeFieldInfo=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_tiff_TIFFMergeFieldInfo" >&5 $as_echo "$ac_cv_lib_tiff_TIFFMergeFieldInfo" >&6; } if test "x$ac_cv_lib_tiff_TIFFMergeFieldInfo" = xyes; then : TIFF_CONFIG=yes else as_fn_error $? "Libtiff 3.6.0 Beta or later required for this version of libgeotiff. Please upgrade libtiff or use an older version of libgeotiff." "$LINENO" 5 fi LIBS="$LIBS -ltiff" TIFF_INC= TIFF_CONFIG="yes" elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TIFFOpen in -ltiff" >&5 $as_echo_n "checking for TIFFOpen in -ltiff... " >&6; } if ${ac_cv_lib_tiff_TIFFOpen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ltiff -lm $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char TIFFOpen (); int main () { return TIFFOpen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_tiff_TIFFOpen=yes else ac_cv_lib_tiff_TIFFOpen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_tiff_TIFFOpen" >&5 $as_echo "$ac_cv_lib_tiff_TIFFOpen" >&6; } if test "x$ac_cv_lib_tiff_TIFFOpen" = xyes; then : TIFF_CONFIG=yes else as_fn_error $? "You will need to substantially rewrite libxtiff to build libgeotiff without libtiff" "$LINENO" 5 fi LIBS_SAVED="$LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TIFFMergeFieldInfo in -ltiff" >&5 $as_echo_n "checking for TIFFMergeFieldInfo in -ltiff... " >&6; } if ${ac_cv_lib_tiff_TIFFMergeFieldInfo+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ltiff -lm $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char TIFFMergeFieldInfo (); int main () { return TIFFMergeFieldInfo (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_tiff_TIFFMergeFieldInfo=yes else ac_cv_lib_tiff_TIFFMergeFieldInfo=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_tiff_TIFFMergeFieldInfo" >&5 $as_echo "$ac_cv_lib_tiff_TIFFMergeFieldInfo" >&6; } if test "x$ac_cv_lib_tiff_TIFFMergeFieldInfo" = xyes; then : TIFF_CONFIG=yes else as_fn_error $? "Libtiff 3.6.0 Beta or later required for this version of libgeotiff. Please upgrade libtiff or use an older version of libgeotiff." "$LINENO" 5 fi LIBS="$LIBS -ltiff" TIFF_INC= TIFF_CONFIG="yes" else LIBTIFF_CFLAGS=$pkg_cv_LIBTIFF_CFLAGS LIBTIFF_LIBS=$pkg_cv_LIBTIFF_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } TIFF_INC="$LIBTIFF_CFLAGS" LIBS="$LIBS $LIBTIFF_LIBS" TIFF_CONFIG="yes" fi fi if test ! x$TIFF_CONFIG = xno; then TIFF_IS_CONFIG_TRUE= TIFF_IS_CONFIG_FALSE='#' else TIFF_IS_CONFIG_TRUE='#' TIFF_IS_CONFIG_FALSE= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PROJ >= 6 library" >&5 $as_echo_n "checking for PROJ >= 6 library... " >&6; } # Check whether --with-proj was given. if test "${with_proj+set}" = set; then : withval=$with_proj; fi PROJ_INCLUDE="" if test "x$with_proj" = "xno" ; then as_fn_error $? "PROJ 6 is a required dependency." "$LINENO" 5 else if test "x$with_proj" = "xyes" -o "x$with_proj" = "x"; then pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PROJ" >&5 $as_echo_n "checking for PROJ... " >&6; } if test -n "$PROJ_CFLAGS"; then pkg_cv_PROJ_CFLAGS="$PROJ_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"proj\""; } >&5 ($PKG_CONFIG --exists --print-errors "proj") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_PROJ_CFLAGS=`$PKG_CONFIG --cflags "proj" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$PROJ_LIBS"; then pkg_cv_PROJ_LIBS="$PROJ_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"proj\""; } >&5 ($PKG_CONFIG --exists --print-errors "proj") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_PROJ_LIBS=`$PKG_CONFIG --libs "proj" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then PROJ_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "proj" 2>&1` else PROJ_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "proj" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$PROJ_PKG_ERRORS" >&5 PROJ_FOUND=no elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } PROJ_FOUND=no else PROJ_CFLAGS=$pkg_cv_PROJ_CFLAGS PROJ_LIBS=$pkg_cv_PROJ_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } LIBS="$LIBS $PROJ_LIBS" PROJ_FOUND=yes fi if test "$PROJ_FOUND" = "no"; then ORIG_LIBS="$LIBS" LIBS="-lproj $ORIG_LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for proj_create_from_wkt in -lproj" >&5 $as_echo_n "checking for proj_create_from_wkt in -lproj... " >&6; } if ${ac_cv_lib_proj_proj_create_from_wkt+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lproj $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char proj_create_from_wkt (); int main () { return proj_create_from_wkt (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_proj_proj_create_from_wkt=yes else ac_cv_lib_proj_proj_create_from_wkt=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_proj_proj_create_from_wkt" >&5 $as_echo "$ac_cv_lib_proj_proj_create_from_wkt" >&6; } if test "x$ac_cv_lib_proj_proj_create_from_wkt" = xyes; then : PROJ_FOUND=yes else PROJ_FOUND=no fi fi if test "$PROJ_FOUND" = "no"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for internal_proj_create_from_wkt in -lproj" >&5 $as_echo_n "checking for internal_proj_create_from_wkt in -lproj... " >&6; } if ${ac_cv_lib_proj_internal_proj_create_from_wkt+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lproj $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char internal_proj_create_from_wkt (); int main () { return internal_proj_create_from_wkt (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_proj_internal_proj_create_from_wkt=yes else ac_cv_lib_proj_internal_proj_create_from_wkt=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_proj_internal_proj_create_from_wkt" >&5 $as_echo "$ac_cv_lib_proj_internal_proj_create_from_wkt" >&6; } if test "x$ac_cv_lib_proj_internal_proj_create_from_wkt" = xyes; then : PROJ_FOUND=yes else PROJ_FOUND=no fi if test "$PROJ_FOUND" = "yes"; then PROJ_INCLUDE="-DPROJ_RENAME_SYMBOLS" fi fi if test "$PROJ_FOUND" = "no"; then LIBS="-linternalproj $ORIG_LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for internal_proj_create_from_wkt in -linternalproj" >&5 $as_echo_n "checking for internal_proj_create_from_wkt in -linternalproj... " >&6; } if ${ac_cv_lib_internalproj_internal_proj_create_from_wkt+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-linternalproj $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char internal_proj_create_from_wkt (); int main () { return internal_proj_create_from_wkt (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_internalproj_internal_proj_create_from_wkt=yes else ac_cv_lib_internalproj_internal_proj_create_from_wkt=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_internalproj_internal_proj_create_from_wkt" >&5 $as_echo "$ac_cv_lib_internalproj_internal_proj_create_from_wkt" >&6; } if test "x$ac_cv_lib_internalproj_internal_proj_create_from_wkt" = xyes; then : PROJ_FOUND=yes else PROJ_FOUND=no fi if test "$PROJ_FOUND" = "yes"; then PROJ_INCLUDE="-DPROJ_RENAME_SYMBOLS" fi fi if test "$PROJ_FOUND" = "no"; then as_fn_error $? "PROJ 6 symbols not found" "$LINENO" 5 fi for ac_header in proj.h do : ac_fn_c_check_header_mongrel "$LINENO" "proj.h" "ac_cv_header_proj_h" "$ac_includes_default" if test "x$ac_cv_header_proj_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_PROJ_H 1 _ACEOF fi done if test "$ac_cv_header_proj_h" = "yes" ; then { $as_echo "$as_me:${as_lineno-$LINENO}: proj.h found" >&5 $as_echo "$as_me: proj.h found" >&6;} else as_fn_error $? "proj.h not found" "$LINENO" 5 fi else ORIG_LIBS="$LIBS" LIBS="-L$with_proj/lib -lproj $ORIG_LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for proj_create_from_wkt in -lproj" >&5 $as_echo_n "checking for proj_create_from_wkt in -lproj... " >&6; } if ${ac_cv_lib_proj_proj_create_from_wkt+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lproj $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char proj_create_from_wkt (); int main () { return proj_create_from_wkt (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_proj_proj_create_from_wkt=yes else ac_cv_lib_proj_proj_create_from_wkt=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_proj_proj_create_from_wkt" >&5 $as_echo "$ac_cv_lib_proj_proj_create_from_wkt" >&6; } if test "x$ac_cv_lib_proj_proj_create_from_wkt" = xyes; then : PROJ_FOUND=yes else PROJ_FOUND=no fi if test "$PROJ_FOUND" = "no"; then LIBS="-L$with_proj/lib -lproj -lsqlite3 $ORIG_LIBS" unset ac_cv_lib_proj_proj_create_from_wkt { $as_echo "$as_me:${as_lineno-$LINENO}: checking for proj_create_from_wkt in -lproj" >&5 $as_echo_n "checking for proj_create_from_wkt in -lproj... " >&6; } if ${ac_cv_lib_proj_proj_create_from_wkt+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lproj $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char proj_create_from_wkt (); int main () { return proj_create_from_wkt (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_proj_proj_create_from_wkt=yes else ac_cv_lib_proj_proj_create_from_wkt=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_proj_proj_create_from_wkt" >&5 $as_echo "$ac_cv_lib_proj_proj_create_from_wkt" >&6; } if test "x$ac_cv_lib_proj_proj_create_from_wkt" = xyes; then : PROJ_FOUND=yes else PROJ_FOUND=no fi fi if test "$PROJ_FOUND" = "no"; then LIBS="-L$with_proj/lib -lproj $ORIG_LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for internal_proj_create_from_wkt in -lproj" >&5 $as_echo_n "checking for internal_proj_create_from_wkt in -lproj... " >&6; } if ${ac_cv_lib_proj_internal_proj_create_from_wkt+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lproj $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char internal_proj_create_from_wkt (); int main () { return internal_proj_create_from_wkt (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_proj_internal_proj_create_from_wkt=yes else ac_cv_lib_proj_internal_proj_create_from_wkt=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_proj_internal_proj_create_from_wkt" >&5 $as_echo "$ac_cv_lib_proj_internal_proj_create_from_wkt" >&6; } if test "x$ac_cv_lib_proj_internal_proj_create_from_wkt" = xyes; then : PROJ_FOUND=yes else PROJ_FOUND=no fi if test "$PROJ_FOUND" = "no"; then LIBS="-L$with_proj/lib -lproj -lsqlite3 $ORIG_LIBS" unset ac_cv_lib_proj_internal_proj_create_from_wkt { $as_echo "$as_me:${as_lineno-$LINENO}: checking for internal_proj_create_from_wkt in -lproj" >&5 $as_echo_n "checking for internal_proj_create_from_wkt in -lproj... " >&6; } if ${ac_cv_lib_proj_internal_proj_create_from_wkt+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lproj $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char internal_proj_create_from_wkt (); int main () { return internal_proj_create_from_wkt (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_proj_internal_proj_create_from_wkt=yes else ac_cv_lib_proj_internal_proj_create_from_wkt=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_proj_internal_proj_create_from_wkt" >&5 $as_echo "$ac_cv_lib_proj_internal_proj_create_from_wkt" >&6; } if test "x$ac_cv_lib_proj_internal_proj_create_from_wkt" = xyes; then : PROJ_FOUND=yes else PROJ_FOUND=no fi fi if test "$PROJ_FOUND" = "yes"; then PROJ_INCLUDE="-DPROJ_RENAME_SYMBOLS" fi fi if test "$PROJ_FOUND" = "no"; then LIBS="-L$with_proj/lib -linternalproj $ORIG_LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for internal_proj_create_from_wkt in -linternalproj" >&5 $as_echo_n "checking for internal_proj_create_from_wkt in -linternalproj... " >&6; } if ${ac_cv_lib_internalproj_internal_proj_create_from_wkt+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-linternalproj $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char internal_proj_create_from_wkt (); int main () { return internal_proj_create_from_wkt (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_internalproj_internal_proj_create_from_wkt=yes else ac_cv_lib_internalproj_internal_proj_create_from_wkt=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_internalproj_internal_proj_create_from_wkt" >&5 $as_echo "$ac_cv_lib_internalproj_internal_proj_create_from_wkt" >&6; } if test "x$ac_cv_lib_internalproj_internal_proj_create_from_wkt" = xyes; then : PROJ_FOUND=yes else PROJ_FOUND=no fi if test "$PROJ_FOUND" = "no"; then LIBS="-L$with_proj/lib -linternalproj -lsqlite3 $ORIG_LIBS" unset ac_cv_lib_internal_proj_internal_proj_create_from_wkt { $as_echo "$as_me:${as_lineno-$LINENO}: checking for internal_proj_create_from_wkt in -linternalproj" >&5 $as_echo_n "checking for internal_proj_create_from_wkt in -linternalproj... " >&6; } if ${ac_cv_lib_internalproj_internal_proj_create_from_wkt+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-linternalproj $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char internal_proj_create_from_wkt (); int main () { return internal_proj_create_from_wkt (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_internalproj_internal_proj_create_from_wkt=yes else ac_cv_lib_internalproj_internal_proj_create_from_wkt=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_internalproj_internal_proj_create_from_wkt" >&5 $as_echo "$ac_cv_lib_internalproj_internal_proj_create_from_wkt" >&6; } if test "x$ac_cv_lib_internalproj_internal_proj_create_from_wkt" = xyes; then : PROJ_FOUND=yes else PROJ_FOUND=no fi fi if test "$PROJ_FOUND" = "yes"; then PROJ_INCLUDE="-DPROJ_RENAME_SYMBOLS" fi fi if test "$PROJ_FOUND" = "no"; then as_fn_error $? "PROJ 6 symbols not found" "$LINENO" 5 fi if test -r "$with_proj/include/proj.h" ; then PROJ_INCLUDE="$PROJ_INCLUDE -I$with_proj/include" { $as_echo "$as_me:${as_lineno-$LINENO}: proj.h found" >&5 $as_echo "$as_me: proj.h found" >&6;} else as_fn_error $? "proj.h not found" "$LINENO" 5 fi fi fi # Check whether --enable-towgs84 was given. if test "${enable_towgs84+set}" = set; then : enableval=$enable_towgs84; $as_echo "#define GEO_NORMALIZE_DISABLE_TOWGS84 /**/" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool needs -no-undefined flag to build shared libraries" >&5 $as_echo_n "checking if libtool needs -no-undefined flag to build shared libraries... " >&6; } case "${host}" in *-*-cygwin* | *-*-mingw*|*-*-aix*) ## Add in the -no-undefined flag to LDFLAGS for libtool. { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } NOUNDEFINED=" -no-undefined" ;; *) ## Don't add in anything. { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } ;; esac # Files: DX_PROJECT=$PACKAGE_NAME DX_CONFIG=docs/Doxyfile DX_DOCDIR=docs/output # Environment variables used inside doxygen.cfg: DX_ENV="$DX_ENV SRCDIR='$srcdir'" DX_ENV="$DX_ENV PROJECT='$DX_PROJECT'" DX_ENV="$DX_ENV DOCDIR='$DX_DOCDIR'" DX_ENV="$DX_ENV VERSION='$PACKAGE_VERSION'" # Doxygen itself: # Check whether --enable-doxygen-doc was given. if test "${enable_doxygen_doc+set}" = set; then : enableval=$enable_doxygen_doc; case "$enableval" in #( y|Y|yes|Yes|YES) DX_FLAG_doc=1 ;; #( n|N|no|No|NO) DX_FLAG_doc=0 ;; #( *) as_fn_error $? "invalid value '$enableval' given to doxygen-doc" "$LINENO" 5 ;; esac else DX_FLAG_doc=1 fi if test "$DX_FLAG_doc" = 1; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}doxygen", so it can be a program name with args. set dummy ${ac_tool_prefix}doxygen; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_DX_DOXYGEN+:} false; then : $as_echo_n "(cached) " >&6 else case $DX_DOXYGEN in [\\/]* | ?:[\\/]*) ac_cv_path_DX_DOXYGEN="$DX_DOXYGEN" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_DX_DOXYGEN="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_DOXYGEN=$ac_cv_path_DX_DOXYGEN if test -n "$DX_DOXYGEN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_DOXYGEN" >&5 $as_echo "$DX_DOXYGEN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_DOXYGEN"; then ac_pt_DX_DOXYGEN=$DX_DOXYGEN # Extract the first word of "doxygen", so it can be a program name with args. set dummy doxygen; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_ac_pt_DX_DOXYGEN+:} false; then : $as_echo_n "(cached) " >&6 else case $ac_pt_DX_DOXYGEN in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_DOXYGEN="$ac_pt_DX_DOXYGEN" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_ac_pt_DX_DOXYGEN="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_DOXYGEN=$ac_cv_path_ac_pt_DX_DOXYGEN if test -n "$ac_pt_DX_DOXYGEN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_DOXYGEN" >&5 $as_echo "$ac_pt_DX_DOXYGEN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_DOXYGEN" = x; then DX_DOXYGEN="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_DOXYGEN=$ac_pt_DX_DOXYGEN fi else DX_DOXYGEN="$ac_cv_path_DX_DOXYGEN" fi if test "$DX_FLAG_doc$DX_DOXYGEN" = 1; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: doxygen not found - will not generate any doxygen documentation" >&5 $as_echo "$as_me: WARNING: doxygen not found - will not generate any doxygen documentation" >&2;} DX_FLAG_doc=0 fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}perl", so it can be a program name with args. set dummy ${ac_tool_prefix}perl; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_DX_PERL+:} false; then : $as_echo_n "(cached) " >&6 else case $DX_PERL in [\\/]* | ?:[\\/]*) ac_cv_path_DX_PERL="$DX_PERL" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_DX_PERL="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_PERL=$ac_cv_path_DX_PERL if test -n "$DX_PERL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_PERL" >&5 $as_echo "$DX_PERL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_PERL"; then ac_pt_DX_PERL=$DX_PERL # Extract the first word of "perl", so it can be a program name with args. set dummy perl; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_ac_pt_DX_PERL+:} false; then : $as_echo_n "(cached) " >&6 else case $ac_pt_DX_PERL in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_PERL="$ac_pt_DX_PERL" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_ac_pt_DX_PERL="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_PERL=$ac_cv_path_ac_pt_DX_PERL if test -n "$ac_pt_DX_PERL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_PERL" >&5 $as_echo "$ac_pt_DX_PERL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_PERL" = x; then DX_PERL="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_PERL=$ac_pt_DX_PERL fi else DX_PERL="$ac_cv_path_DX_PERL" fi if test "$DX_FLAG_doc$DX_PERL" = 1; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: perl not found - will not generate any doxygen documentation" >&5 $as_echo "$as_me: WARNING: perl not found - will not generate any doxygen documentation" >&2;} DX_FLAG_doc=0 fi : fi if test "$DX_FLAG_doc" = 1; then if :; then DX_COND_doc_TRUE= DX_COND_doc_FALSE='#' else DX_COND_doc_TRUE='#' DX_COND_doc_FALSE= fi DX_ENV="$DX_ENV PERL_PATH='$DX_PERL'" : else if false; then DX_COND_doc_TRUE= DX_COND_doc_FALSE='#' else DX_COND_doc_TRUE='#' DX_COND_doc_FALSE= fi : fi # Dot for graphics: # Check whether --enable-doxygen-dot was given. if test "${enable_doxygen_dot+set}" = set; then : enableval=$enable_doxygen_dot; case "$enableval" in #( y|Y|yes|Yes|YES) DX_FLAG_dot=1 test "$DX_FLAG_doc" = "1" \ || as_fn_error $? "doxygen-dot requires doxygen-dot" "$LINENO" 5 ;; #( n|N|no|No|NO) DX_FLAG_dot=0 ;; #( *) as_fn_error $? "invalid value '$enableval' given to doxygen-dot" "$LINENO" 5 ;; esac else DX_FLAG_dot=1 test "$DX_FLAG_doc" = "1" || DX_FLAG_dot=0 fi if test "$DX_FLAG_dot" = 1; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dot", so it can be a program name with args. set dummy ${ac_tool_prefix}dot; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_DX_DOT+:} false; then : $as_echo_n "(cached) " >&6 else case $DX_DOT in [\\/]* | ?:[\\/]*) ac_cv_path_DX_DOT="$DX_DOT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_DX_DOT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_DOT=$ac_cv_path_DX_DOT if test -n "$DX_DOT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_DOT" >&5 $as_echo "$DX_DOT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_DOT"; then ac_pt_DX_DOT=$DX_DOT # Extract the first word of "dot", so it can be a program name with args. set dummy dot; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_ac_pt_DX_DOT+:} false; then : $as_echo_n "(cached) " >&6 else case $ac_pt_DX_DOT in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_DOT="$ac_pt_DX_DOT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_ac_pt_DX_DOT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_DOT=$ac_cv_path_ac_pt_DX_DOT if test -n "$ac_pt_DX_DOT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_DOT" >&5 $as_echo "$ac_pt_DX_DOT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_DOT" = x; then DX_DOT="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_DOT=$ac_pt_DX_DOT fi else DX_DOT="$ac_cv_path_DX_DOT" fi if test "$DX_FLAG_dot$DX_DOT" = 1; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: dot not found - will not generate graphics for doxygen documentation" >&5 $as_echo "$as_me: WARNING: dot not found - will not generate graphics for doxygen documentation" >&2;} DX_FLAG_dot=0 fi : fi if test "$DX_FLAG_dot" = 1; then if :; then DX_COND_dot_TRUE= DX_COND_dot_FALSE='#' else DX_COND_dot_TRUE='#' DX_COND_dot_FALSE= fi DX_ENV="$DX_ENV HAVE_DOT='YES'" DX_ENV="$DX_ENV DOT_PATH='`expr ".$DX_DOT" : '\(\.\)[^/]*$' \| "x$DX_DOT" : 'x\(.*\)/[^/]*$'`'" : else if false; then DX_COND_dot_TRUE= DX_COND_dot_FALSE='#' else DX_COND_dot_TRUE='#' DX_COND_dot_FALSE= fi DX_ENV="$DX_ENV HAVE_DOT='NO'" : fi # Man pages generation: # Check whether --enable-doxygen-man was given. if test "${enable_doxygen_man+set}" = set; then : enableval=$enable_doxygen_man; case "$enableval" in #( y|Y|yes|Yes|YES) DX_FLAG_man=1 test "$DX_FLAG_doc" = "1" \ || as_fn_error $? "doxygen-man requires doxygen-man" "$LINENO" 5 ;; #( n|N|no|No|NO) DX_FLAG_man=0 ;; #( *) as_fn_error $? "invalid value '$enableval' given to doxygen-man" "$LINENO" 5 ;; esac else DX_FLAG_man=1 test "$DX_FLAG_doc" = "1" || DX_FLAG_man=0 fi if test "$DX_FLAG_man" = 1; then : fi if test "$DX_FLAG_man" = 1; then if :; then DX_COND_man_TRUE= DX_COND_man_FALSE='#' else DX_COND_man_TRUE='#' DX_COND_man_FALSE= fi DX_ENV="$DX_ENV GENERATE_MAN='YES'" : else if false; then DX_COND_man_TRUE= DX_COND_man_FALSE='#' else DX_COND_man_TRUE='#' DX_COND_man_FALSE= fi DX_ENV="$DX_ENV GENERATE_MAN='NO'" : fi # RTF file generation: # Check whether --enable-doxygen-rtf was given. if test "${enable_doxygen_rtf+set}" = set; then : enableval=$enable_doxygen_rtf; case "$enableval" in #( y|Y|yes|Yes|YES) DX_FLAG_rtf=1 test "$DX_FLAG_doc" = "1" \ || as_fn_error $? "doxygen-rtf requires doxygen-rtf" "$LINENO" 5 ;; #( n|N|no|No|NO) DX_FLAG_rtf=0 ;; #( *) as_fn_error $? "invalid value '$enableval' given to doxygen-rtf" "$LINENO" 5 ;; esac else DX_FLAG_rtf=0 test "$DX_FLAG_doc" = "1" || DX_FLAG_rtf=0 fi if test "$DX_FLAG_rtf" = 1; then : fi if test "$DX_FLAG_rtf" = 1; then if :; then DX_COND_rtf_TRUE= DX_COND_rtf_FALSE='#' else DX_COND_rtf_TRUE='#' DX_COND_rtf_FALSE= fi DX_ENV="$DX_ENV GENERATE_RTF='YES'" : else if false; then DX_COND_rtf_TRUE= DX_COND_rtf_FALSE='#' else DX_COND_rtf_TRUE='#' DX_COND_rtf_FALSE= fi DX_ENV="$DX_ENV GENERATE_RTF='NO'" : fi # XML file generation: # Check whether --enable-doxygen-xml was given. if test "${enable_doxygen_xml+set}" = set; then : enableval=$enable_doxygen_xml; case "$enableval" in #( y|Y|yes|Yes|YES) DX_FLAG_xml=1 test "$DX_FLAG_doc" = "1" \ || as_fn_error $? "doxygen-xml requires doxygen-xml" "$LINENO" 5 ;; #( n|N|no|No|NO) DX_FLAG_xml=0 ;; #( *) as_fn_error $? "invalid value '$enableval' given to doxygen-xml" "$LINENO" 5 ;; esac else DX_FLAG_xml=0 test "$DX_FLAG_doc" = "1" || DX_FLAG_xml=0 fi if test "$DX_FLAG_xml" = 1; then : fi if test "$DX_FLAG_xml" = 1; then if :; then DX_COND_xml_TRUE= DX_COND_xml_FALSE='#' else DX_COND_xml_TRUE='#' DX_COND_xml_FALSE= fi DX_ENV="$DX_ENV GENERATE_XML='YES'" : else if false; then DX_COND_xml_TRUE= DX_COND_xml_FALSE='#' else DX_COND_xml_TRUE='#' DX_COND_xml_FALSE= fi DX_ENV="$DX_ENV GENERATE_XML='NO'" : fi # (Compressed) HTML help generation: # Check whether --enable-doxygen-chm was given. if test "${enable_doxygen_chm+set}" = set; then : enableval=$enable_doxygen_chm; case "$enableval" in #( y|Y|yes|Yes|YES) DX_FLAG_chm=1 test "$DX_FLAG_doc" = "1" \ || as_fn_error $? "doxygen-chm requires doxygen-chm" "$LINENO" 5 ;; #( n|N|no|No|NO) DX_FLAG_chm=0 ;; #( *) as_fn_error $? "invalid value '$enableval' given to doxygen-chm" "$LINENO" 5 ;; esac else DX_FLAG_chm=0 test "$DX_FLAG_doc" = "1" || DX_FLAG_chm=0 fi if test "$DX_FLAG_chm" = 1; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}hhc", so it can be a program name with args. set dummy ${ac_tool_prefix}hhc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_DX_HHC+:} false; then : $as_echo_n "(cached) " >&6 else case $DX_HHC in [\\/]* | ?:[\\/]*) ac_cv_path_DX_HHC="$DX_HHC" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_DX_HHC="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_HHC=$ac_cv_path_DX_HHC if test -n "$DX_HHC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_HHC" >&5 $as_echo "$DX_HHC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_HHC"; then ac_pt_DX_HHC=$DX_HHC # Extract the first word of "hhc", so it can be a program name with args. set dummy hhc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_ac_pt_DX_HHC+:} false; then : $as_echo_n "(cached) " >&6 else case $ac_pt_DX_HHC in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_HHC="$ac_pt_DX_HHC" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_ac_pt_DX_HHC="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_HHC=$ac_cv_path_ac_pt_DX_HHC if test -n "$ac_pt_DX_HHC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_HHC" >&5 $as_echo "$ac_pt_DX_HHC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_HHC" = x; then DX_HHC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_HHC=$ac_pt_DX_HHC fi else DX_HHC="$ac_cv_path_DX_HHC" fi if test "$DX_FLAG_chm$DX_HHC" = 1; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: hhc not found - will not generate doxygen compressed HTML help documentation" >&5 $as_echo "$as_me: WARNING: hhc not found - will not generate doxygen compressed HTML help documentation" >&2;} DX_FLAG_chm=0 fi : fi if test "$DX_FLAG_chm" = 1; then if :; then DX_COND_chm_TRUE= DX_COND_chm_FALSE='#' else DX_COND_chm_TRUE='#' DX_COND_chm_FALSE= fi DX_ENV="$DX_ENV HHC_PATH='$DX_HHC'" DX_ENV="$DX_ENV GENERATE_HTML='YES'" DX_ENV="$DX_ENV GENERATE_HTMLHELP='YES'" : else if false; then DX_COND_chm_TRUE= DX_COND_chm_FALSE='#' else DX_COND_chm_TRUE='#' DX_COND_chm_FALSE= fi DX_ENV="$DX_ENV GENERATE_HTMLHELP='NO'" : fi # Seperate CHI file generation. # Check whether --enable-doxygen-chi was given. if test "${enable_doxygen_chi+set}" = set; then : enableval=$enable_doxygen_chi; case "$enableval" in #( y|Y|yes|Yes|YES) DX_FLAG_chi=1 test "$DX_FLAG_chm" = "1" \ || as_fn_error $? "doxygen-chi requires doxygen-chi" "$LINENO" 5 ;; #( n|N|no|No|NO) DX_FLAG_chi=0 ;; #( *) as_fn_error $? "invalid value '$enableval' given to doxygen-chi" "$LINENO" 5 ;; esac else DX_FLAG_chi=0 test "$DX_FLAG_chm" = "1" || DX_FLAG_chi=0 fi if test "$DX_FLAG_chi" = 1; then : fi if test "$DX_FLAG_chi" = 1; then if :; then DX_COND_chi_TRUE= DX_COND_chi_FALSE='#' else DX_COND_chi_TRUE='#' DX_COND_chi_FALSE= fi DX_ENV="$DX_ENV GENERATE_CHI='YES'" : else if false; then DX_COND_chi_TRUE= DX_COND_chi_FALSE='#' else DX_COND_chi_TRUE='#' DX_COND_chi_FALSE= fi DX_ENV="$DX_ENV GENERATE_CHI='NO'" : fi # Plain HTML pages generation: # Check whether --enable-doxygen-html was given. if test "${enable_doxygen_html+set}" = set; then : enableval=$enable_doxygen_html; case "$enableval" in #( y|Y|yes|Yes|YES) DX_FLAG_html=1 test "$DX_FLAG_doc" = "1" \ || as_fn_error $? "doxygen-html requires doxygen-html" "$LINENO" 5 test "$DX_FLAG_chm" = "0" \ || as_fn_error $? "doxygen-html contradicts doxygen-html" "$LINENO" 5 ;; #( n|N|no|No|NO) DX_FLAG_html=0 ;; #( *) as_fn_error $? "invalid value '$enableval' given to doxygen-html" "$LINENO" 5 ;; esac else DX_FLAG_html=1 test "$DX_FLAG_doc" = "1" || DX_FLAG_html=0 test "$DX_FLAG_chm" = "0" || DX_FLAG_html=0 fi if test "$DX_FLAG_html" = 1; then : fi if test "$DX_FLAG_html" = 1; then if :; then DX_COND_html_TRUE= DX_COND_html_FALSE='#' else DX_COND_html_TRUE='#' DX_COND_html_FALSE= fi DX_ENV="$DX_ENV GENERATE_HTML='YES'" : else if false; then DX_COND_html_TRUE= DX_COND_html_FALSE='#' else DX_COND_html_TRUE='#' DX_COND_html_FALSE= fi test "$DX_FLAG_chm" = 1 || DX_ENV="$DX_ENV GENERATE_HTML='NO'" : fi # PostScript file generation: # Check whether --enable-doxygen-ps was given. if test "${enable_doxygen_ps+set}" = set; then : enableval=$enable_doxygen_ps; case "$enableval" in #( y|Y|yes|Yes|YES) DX_FLAG_ps=1 test "$DX_FLAG_doc" = "1" \ || as_fn_error $? "doxygen-ps requires doxygen-ps" "$LINENO" 5 ;; #( n|N|no|No|NO) DX_FLAG_ps=0 ;; #( *) as_fn_error $? "invalid value '$enableval' given to doxygen-ps" "$LINENO" 5 ;; esac else DX_FLAG_ps=0 test "$DX_FLAG_doc" = "1" || DX_FLAG_ps=0 fi if test "$DX_FLAG_ps" = 1; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}latex", so it can be a program name with args. set dummy ${ac_tool_prefix}latex; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_DX_LATEX+:} false; then : $as_echo_n "(cached) " >&6 else case $DX_LATEX in [\\/]* | ?:[\\/]*) ac_cv_path_DX_LATEX="$DX_LATEX" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_DX_LATEX="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_LATEX=$ac_cv_path_DX_LATEX if test -n "$DX_LATEX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_LATEX" >&5 $as_echo "$DX_LATEX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_LATEX"; then ac_pt_DX_LATEX=$DX_LATEX # Extract the first word of "latex", so it can be a program name with args. set dummy latex; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_ac_pt_DX_LATEX+:} false; then : $as_echo_n "(cached) " >&6 else case $ac_pt_DX_LATEX in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_LATEX="$ac_pt_DX_LATEX" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_ac_pt_DX_LATEX="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_LATEX=$ac_cv_path_ac_pt_DX_LATEX if test -n "$ac_pt_DX_LATEX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_LATEX" >&5 $as_echo "$ac_pt_DX_LATEX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_LATEX" = x; then DX_LATEX="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_LATEX=$ac_pt_DX_LATEX fi else DX_LATEX="$ac_cv_path_DX_LATEX" fi if test "$DX_FLAG_ps$DX_LATEX" = 1; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: latex not found - will not generate doxygen PostScript documentation" >&5 $as_echo "$as_me: WARNING: latex not found - will not generate doxygen PostScript documentation" >&2;} DX_FLAG_ps=0 fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}makeindex", so it can be a program name with args. set dummy ${ac_tool_prefix}makeindex; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_DX_MAKEINDEX+:} false; then : $as_echo_n "(cached) " >&6 else case $DX_MAKEINDEX in [\\/]* | ?:[\\/]*) ac_cv_path_DX_MAKEINDEX="$DX_MAKEINDEX" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_DX_MAKEINDEX="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_MAKEINDEX=$ac_cv_path_DX_MAKEINDEX if test -n "$DX_MAKEINDEX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_MAKEINDEX" >&5 $as_echo "$DX_MAKEINDEX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_MAKEINDEX"; then ac_pt_DX_MAKEINDEX=$DX_MAKEINDEX # Extract the first word of "makeindex", so it can be a program name with args. set dummy makeindex; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_ac_pt_DX_MAKEINDEX+:} false; then : $as_echo_n "(cached) " >&6 else case $ac_pt_DX_MAKEINDEX in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_MAKEINDEX="$ac_pt_DX_MAKEINDEX" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_ac_pt_DX_MAKEINDEX="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_MAKEINDEX=$ac_cv_path_ac_pt_DX_MAKEINDEX if test -n "$ac_pt_DX_MAKEINDEX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_MAKEINDEX" >&5 $as_echo "$ac_pt_DX_MAKEINDEX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_MAKEINDEX" = x; then DX_MAKEINDEX="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_MAKEINDEX=$ac_pt_DX_MAKEINDEX fi else DX_MAKEINDEX="$ac_cv_path_DX_MAKEINDEX" fi if test "$DX_FLAG_ps$DX_MAKEINDEX" = 1; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: makeindex not found - will not generate doxygen PostScript documentation" >&5 $as_echo "$as_me: WARNING: makeindex not found - will not generate doxygen PostScript documentation" >&2;} DX_FLAG_ps=0 fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dvips", so it can be a program name with args. set dummy ${ac_tool_prefix}dvips; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_DX_DVIPS+:} false; then : $as_echo_n "(cached) " >&6 else case $DX_DVIPS in [\\/]* | ?:[\\/]*) ac_cv_path_DX_DVIPS="$DX_DVIPS" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_DX_DVIPS="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_DVIPS=$ac_cv_path_DX_DVIPS if test -n "$DX_DVIPS"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_DVIPS" >&5 $as_echo "$DX_DVIPS" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_DVIPS"; then ac_pt_DX_DVIPS=$DX_DVIPS # Extract the first word of "dvips", so it can be a program name with args. set dummy dvips; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_ac_pt_DX_DVIPS+:} false; then : $as_echo_n "(cached) " >&6 else case $ac_pt_DX_DVIPS in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_DVIPS="$ac_pt_DX_DVIPS" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_ac_pt_DX_DVIPS="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_DVIPS=$ac_cv_path_ac_pt_DX_DVIPS if test -n "$ac_pt_DX_DVIPS"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_DVIPS" >&5 $as_echo "$ac_pt_DX_DVIPS" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_DVIPS" = x; then DX_DVIPS="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_DVIPS=$ac_pt_DX_DVIPS fi else DX_DVIPS="$ac_cv_path_DX_DVIPS" fi if test "$DX_FLAG_ps$DX_DVIPS" = 1; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: dvips not found - will not generate doxygen PostScript documentation" >&5 $as_echo "$as_me: WARNING: dvips not found - will not generate doxygen PostScript documentation" >&2;} DX_FLAG_ps=0 fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}egrep", so it can be a program name with args. set dummy ${ac_tool_prefix}egrep; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_DX_EGREP+:} false; then : $as_echo_n "(cached) " >&6 else case $DX_EGREP in [\\/]* | ?:[\\/]*) ac_cv_path_DX_EGREP="$DX_EGREP" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_DX_EGREP="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_EGREP=$ac_cv_path_DX_EGREP if test -n "$DX_EGREP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_EGREP" >&5 $as_echo "$DX_EGREP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_EGREP"; then ac_pt_DX_EGREP=$DX_EGREP # Extract the first word of "egrep", so it can be a program name with args. set dummy egrep; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_ac_pt_DX_EGREP+:} false; then : $as_echo_n "(cached) " >&6 else case $ac_pt_DX_EGREP in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_EGREP="$ac_pt_DX_EGREP" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_ac_pt_DX_EGREP="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_EGREP=$ac_cv_path_ac_pt_DX_EGREP if test -n "$ac_pt_DX_EGREP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_EGREP" >&5 $as_echo "$ac_pt_DX_EGREP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_EGREP" = x; then DX_EGREP="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_EGREP=$ac_pt_DX_EGREP fi else DX_EGREP="$ac_cv_path_DX_EGREP" fi if test "$DX_FLAG_ps$DX_EGREP" = 1; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: egrep not found - will not generate doxygen PostScript documentation" >&5 $as_echo "$as_me: WARNING: egrep not found - will not generate doxygen PostScript documentation" >&2;} DX_FLAG_ps=0 fi : fi if test "$DX_FLAG_ps" = 1; then if :; then DX_COND_ps_TRUE= DX_COND_ps_FALSE='#' else DX_COND_ps_TRUE='#' DX_COND_ps_FALSE= fi : else if false; then DX_COND_ps_TRUE= DX_COND_ps_FALSE='#' else DX_COND_ps_TRUE='#' DX_COND_ps_FALSE= fi : fi # PDF file generation: # Check whether --enable-doxygen-pdf was given. if test "${enable_doxygen_pdf+set}" = set; then : enableval=$enable_doxygen_pdf; case "$enableval" in #( y|Y|yes|Yes|YES) DX_FLAG_pdf=1 test "$DX_FLAG_doc" = "1" \ || as_fn_error $? "doxygen-pdf requires doxygen-pdf" "$LINENO" 5 ;; #( n|N|no|No|NO) DX_FLAG_pdf=0 ;; #( *) as_fn_error $? "invalid value '$enableval' given to doxygen-pdf" "$LINENO" 5 ;; esac else DX_FLAG_pdf=0 test "$DX_FLAG_doc" = "1" || DX_FLAG_pdf=0 fi if test "$DX_FLAG_pdf" = 1; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}pdflatex", so it can be a program name with args. set dummy ${ac_tool_prefix}pdflatex; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_DX_PDFLATEX+:} false; then : $as_echo_n "(cached) " >&6 else case $DX_PDFLATEX in [\\/]* | ?:[\\/]*) ac_cv_path_DX_PDFLATEX="$DX_PDFLATEX" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_DX_PDFLATEX="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_PDFLATEX=$ac_cv_path_DX_PDFLATEX if test -n "$DX_PDFLATEX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_PDFLATEX" >&5 $as_echo "$DX_PDFLATEX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_PDFLATEX"; then ac_pt_DX_PDFLATEX=$DX_PDFLATEX # Extract the first word of "pdflatex", so it can be a program name with args. set dummy pdflatex; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_ac_pt_DX_PDFLATEX+:} false; then : $as_echo_n "(cached) " >&6 else case $ac_pt_DX_PDFLATEX in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_PDFLATEX="$ac_pt_DX_PDFLATEX" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_ac_pt_DX_PDFLATEX="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_PDFLATEX=$ac_cv_path_ac_pt_DX_PDFLATEX if test -n "$ac_pt_DX_PDFLATEX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_PDFLATEX" >&5 $as_echo "$ac_pt_DX_PDFLATEX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_PDFLATEX" = x; then DX_PDFLATEX="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_PDFLATEX=$ac_pt_DX_PDFLATEX fi else DX_PDFLATEX="$ac_cv_path_DX_PDFLATEX" fi if test "$DX_FLAG_pdf$DX_PDFLATEX" = 1; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: pdflatex not found - will not generate doxygen PDF documentation" >&5 $as_echo "$as_me: WARNING: pdflatex not found - will not generate doxygen PDF documentation" >&2;} DX_FLAG_pdf=0 fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}makeindex", so it can be a program name with args. set dummy ${ac_tool_prefix}makeindex; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_DX_MAKEINDEX+:} false; then : $as_echo_n "(cached) " >&6 else case $DX_MAKEINDEX in [\\/]* | ?:[\\/]*) ac_cv_path_DX_MAKEINDEX="$DX_MAKEINDEX" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_DX_MAKEINDEX="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_MAKEINDEX=$ac_cv_path_DX_MAKEINDEX if test -n "$DX_MAKEINDEX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_MAKEINDEX" >&5 $as_echo "$DX_MAKEINDEX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_MAKEINDEX"; then ac_pt_DX_MAKEINDEX=$DX_MAKEINDEX # Extract the first word of "makeindex", so it can be a program name with args. set dummy makeindex; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_ac_pt_DX_MAKEINDEX+:} false; then : $as_echo_n "(cached) " >&6 else case $ac_pt_DX_MAKEINDEX in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_MAKEINDEX="$ac_pt_DX_MAKEINDEX" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_ac_pt_DX_MAKEINDEX="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_MAKEINDEX=$ac_cv_path_ac_pt_DX_MAKEINDEX if test -n "$ac_pt_DX_MAKEINDEX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_MAKEINDEX" >&5 $as_echo "$ac_pt_DX_MAKEINDEX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_MAKEINDEX" = x; then DX_MAKEINDEX="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_MAKEINDEX=$ac_pt_DX_MAKEINDEX fi else DX_MAKEINDEX="$ac_cv_path_DX_MAKEINDEX" fi if test "$DX_FLAG_pdf$DX_MAKEINDEX" = 1; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: makeindex not found - will not generate doxygen PDF documentation" >&5 $as_echo "$as_me: WARNING: makeindex not found - will not generate doxygen PDF documentation" >&2;} DX_FLAG_pdf=0 fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}egrep", so it can be a program name with args. set dummy ${ac_tool_prefix}egrep; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_DX_EGREP+:} false; then : $as_echo_n "(cached) " >&6 else case $DX_EGREP in [\\/]* | ?:[\\/]*) ac_cv_path_DX_EGREP="$DX_EGREP" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_DX_EGREP="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi DX_EGREP=$ac_cv_path_DX_EGREP if test -n "$DX_EGREP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_EGREP" >&5 $as_echo "$DX_EGREP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_DX_EGREP"; then ac_pt_DX_EGREP=$DX_EGREP # Extract the first word of "egrep", so it can be a program name with args. set dummy egrep; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_ac_pt_DX_EGREP+:} false; then : $as_echo_n "(cached) " >&6 else case $ac_pt_DX_EGREP in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_DX_EGREP="$ac_pt_DX_EGREP" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_ac_pt_DX_EGREP="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_DX_EGREP=$ac_cv_path_ac_pt_DX_EGREP if test -n "$ac_pt_DX_EGREP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_EGREP" >&5 $as_echo "$ac_pt_DX_EGREP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_DX_EGREP" = x; then DX_EGREP="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DX_EGREP=$ac_pt_DX_EGREP fi else DX_EGREP="$ac_cv_path_DX_EGREP" fi if test "$DX_FLAG_pdf$DX_EGREP" = 1; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: egrep not found - will not generate doxygen PDF documentation" >&5 $as_echo "$as_me: WARNING: egrep not found - will not generate doxygen PDF documentation" >&2;} DX_FLAG_pdf=0 fi : fi if test "$DX_FLAG_pdf" = 1; then if :; then DX_COND_pdf_TRUE= DX_COND_pdf_FALSE='#' else DX_COND_pdf_TRUE='#' DX_COND_pdf_FALSE= fi : else if false; then DX_COND_pdf_TRUE= DX_COND_pdf_FALSE='#' else DX_COND_pdf_TRUE='#' DX_COND_pdf_FALSE= fi : fi # LaTeX generation for PS and/or PDF: if test "$DX_FLAG_ps" = 1 || test "$DX_FLAG_pdf" = 1; then if :; then DX_COND_latex_TRUE= DX_COND_latex_FALSE='#' else DX_COND_latex_TRUE='#' DX_COND_latex_FALSE= fi DX_ENV="$DX_ENV GENERATE_LATEX='YES'" else if false; then DX_COND_latex_TRUE= DX_COND_latex_FALSE='#' else DX_COND_latex_TRUE='#' DX_COND_latex_FALSE= fi DX_ENV="$DX_ENV GENERATE_LATEX='NO'" fi # Paper size for PS and/or PDF: case "$DOXYGEN_PAPER_SIZE" in #( "") DOXYGEN_PAPER_SIZE="" ;; #( a4wide|a4|letter|legal|executive) DX_ENV="$DX_ENV PAPER_SIZE='$DOXYGEN_PAPER_SIZE'" ;; #( *) as_fn_error $? "unknown DOXYGEN_PAPER_SIZE='$DOXYGEN_PAPER_SIZE'" "$LINENO" 5 ;; esac #For debugging: #echo DX_FLAG_doc=$DX_FLAG_doc #echo DX_FLAG_dot=$DX_FLAG_dot #echo DX_FLAG_man=$DX_FLAG_man #echo DX_FLAG_html=$DX_FLAG_html #echo DX_FLAG_chm=$DX_FLAG_chm #echo DX_FLAG_chi=$DX_FLAG_chi #echo DX_FLAG_rtf=$DX_FLAG_rtf #echo DX_FLAG_xml=$DX_FLAG_xml #echo DX_FLAG_pdf=$DX_FLAG_pdf #echo DX_FLAG_ps=$DX_FLAG_ps #echo DX_ENV=$DX_ENV ac_config_files="$ac_config_files Makefile libxtiff/Makefile bin/Makefile man/Makefile man/man1/Makefile cmake/Makefile test/Makefile libgeotiff.pc" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then if test "x$cache_file" != "x/dev/null"; then { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} if test ! -f "$cache_file" || test -h "$cache_file"; then cat confcache >"$cache_file" else case $cache_file in #( */* | ?:*) mv -f confcache "$cache_file"$$ && mv -f "$cache_file"$$ "$cache_file" ;; #( *) mv -f confcache "$cache_file" ;; esac fi fi else { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs { $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 $as_echo_n "checking that generated files are newer than configure... " >&6; } if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 $as_echo "done" >&6; } if test -n "$EXEEXT"; then am__EXEEXT_TRUE= am__EXEEXT_FALSE='#' else am__EXEEXT_TRUE='#' am__EXEEXT_FALSE= fi if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then as_fn_error $? "conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${ZIP_IS_CONFIG_TRUE}" && test -z "${ZIP_IS_CONFIG_FALSE}"; then as_fn_error $? "conditional \"ZIP_IS_CONFIG\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${JPEG_IS_CONFIG_TRUE}" && test -z "${JPEG_IS_CONFIG_FALSE}"; then as_fn_error $? "conditional \"JPEG_IS_CONFIG\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${TIFF_IS_CONFIG_TRUE}" && test -z "${TIFF_IS_CONFIG_FALSE}"; then as_fn_error $? "conditional \"TIFF_IS_CONFIG\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_doc_TRUE}" && test -z "${DX_COND_doc_FALSE}"; then as_fn_error $? "conditional \"DX_COND_doc\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_doc_TRUE}" && test -z "${DX_COND_doc_FALSE}"; then as_fn_error $? "conditional \"DX_COND_doc\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_dot_TRUE}" && test -z "${DX_COND_dot_FALSE}"; then as_fn_error $? "conditional \"DX_COND_dot\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_dot_TRUE}" && test -z "${DX_COND_dot_FALSE}"; then as_fn_error $? "conditional \"DX_COND_dot\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_man_TRUE}" && test -z "${DX_COND_man_FALSE}"; then as_fn_error $? "conditional \"DX_COND_man\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_man_TRUE}" && test -z "${DX_COND_man_FALSE}"; then as_fn_error $? "conditional \"DX_COND_man\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_rtf_TRUE}" && test -z "${DX_COND_rtf_FALSE}"; then as_fn_error $? "conditional \"DX_COND_rtf\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_rtf_TRUE}" && test -z "${DX_COND_rtf_FALSE}"; then as_fn_error $? "conditional \"DX_COND_rtf\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_xml_TRUE}" && test -z "${DX_COND_xml_FALSE}"; then as_fn_error $? "conditional \"DX_COND_xml\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_xml_TRUE}" && test -z "${DX_COND_xml_FALSE}"; then as_fn_error $? "conditional \"DX_COND_xml\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_chm_TRUE}" && test -z "${DX_COND_chm_FALSE}"; then as_fn_error $? "conditional \"DX_COND_chm\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_chm_TRUE}" && test -z "${DX_COND_chm_FALSE}"; then as_fn_error $? "conditional \"DX_COND_chm\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_chi_TRUE}" && test -z "${DX_COND_chi_FALSE}"; then as_fn_error $? "conditional \"DX_COND_chi\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_chi_TRUE}" && test -z "${DX_COND_chi_FALSE}"; then as_fn_error $? "conditional \"DX_COND_chi\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_html_TRUE}" && test -z "${DX_COND_html_FALSE}"; then as_fn_error $? "conditional \"DX_COND_html\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_html_TRUE}" && test -z "${DX_COND_html_FALSE}"; then as_fn_error $? "conditional \"DX_COND_html\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_ps_TRUE}" && test -z "${DX_COND_ps_FALSE}"; then as_fn_error $? "conditional \"DX_COND_ps\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_ps_TRUE}" && test -z "${DX_COND_ps_FALSE}"; then as_fn_error $? "conditional \"DX_COND_ps\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_pdf_TRUE}" && test -z "${DX_COND_pdf_FALSE}"; then as_fn_error $? "conditional \"DX_COND_pdf\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_pdf_TRUE}" && test -z "${DX_COND_pdf_FALSE}"; then as_fn_error $? "conditional \"DX_COND_pdf\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_latex_TRUE}" && test -z "${DX_COND_latex_FALSE}"; then as_fn_error $? "conditional \"DX_COND_latex\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DX_COND_latex_TRUE}" && test -z "${DX_COND_latex_FALSE}"; then as_fn_error $? "conditional \"DX_COND_latex\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi : "${CONFIG_STATUS=./config.status}" ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## _ASEOF test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by libgeotiff $as_me 1.7.4, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac case $ac_config_headers in *" "*) set x $ac_config_headers; shift; ac_config_headers=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ libgeotiff config.status 1.7.4 configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" Copyright (C) 2012 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; --*=) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg= ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --config | --confi | --conf | --con | --co | --c ) $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header as_fn_error $? "ambiguous option: \`$1' Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error $? "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`' SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`' nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`' objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`' configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`' hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$1 _LTECHO_EOF' } # Quote evaled strings. for var in SHELL \ ECHO \ PATH_SEPARATOR \ SED \ GREP \ EGREP \ FGREP \ LD \ NM \ LN_S \ lt_SP2NL \ lt_NL2SP \ reload_flag \ OBJDUMP \ deplibs_check_method \ file_magic_cmd \ file_magic_glob \ want_nocaseglob \ DLLTOOL \ sharedlib_from_linklib_cmd \ AR \ AR_FLAGS \ archiver_list_spec \ STRIP \ RANLIB \ CC \ CFLAGS \ compiler \ lt_cv_sys_global_symbol_pipe \ lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_import \ lt_cv_sys_global_symbol_to_c_name_address \ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ lt_cv_nm_interface \ nm_file_list_spec \ lt_cv_truncate_bin \ lt_prog_compiler_no_builtin_flag \ lt_prog_compiler_pic \ lt_prog_compiler_wl \ lt_prog_compiler_static \ lt_cv_prog_compiler_c_o \ need_locks \ MANIFEST_TOOL \ DSYMUTIL \ NMEDIT \ LIPO \ OTOOL \ OTOOL64 \ shrext_cmds \ export_dynamic_flag_spec \ whole_archive_flag_spec \ compiler_needs_object \ with_gnu_ld \ allow_undefined_flag \ no_undefined_flag \ hardcode_libdir_flag_spec \ hardcode_libdir_separator \ exclude_expsyms \ include_expsyms \ file_list_spec \ variables_saved_for_relink \ libname_spec \ library_names_spec \ soname_spec \ install_override_mode \ finish_eval \ old_striplib \ striplib; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in reload_cmds \ old_postinstall_cmds \ old_postuninstall_cmds \ old_archive_cmds \ extract_expsyms_cmds \ old_archive_from_new_cmds \ old_archive_from_expsyms_cmds \ archive_cmds \ archive_expsym_cmds \ module_cmds \ module_expsym_cmds \ export_symbols_cmds \ prelink_cmds \ postlink_cmds \ postinstall_cmds \ postuninstall_cmds \ finish_cmds \ sys_lib_search_path_spec \ configure_time_dlsearch_path \ configure_time_lt_sys_library_path; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done ac_aux_dir='$ac_aux_dir' # See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi PACKAGE='$PACKAGE' VERSION='$VERSION' RM='$RM' ofile='$ofile' _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "geo_config.h") CONFIG_HEADERS="$CONFIG_HEADERS geo_config.h" ;; "geotiff.h") CONFIG_FILES="$CONFIG_FILES geotiff.h" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "libxtiff/Makefile") CONFIG_FILES="$CONFIG_FILES libxtiff/Makefile" ;; "bin/Makefile") CONFIG_FILES="$CONFIG_FILES bin/Makefile" ;; "man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;; "man/man1/Makefile") CONFIG_FILES="$CONFIG_FILES man/man1/Makefile" ;; "cmake/Makefile") CONFIG_FILES="$CONFIG_FILES cmake/Makefile" ;; "test/Makefile") CONFIG_FILES="$CONFIG_FILES test/Makefile" ;; "libgeotiff.pc") CONFIG_FILES="$CONFIG_FILES libgeotiff.pc" ;; *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= ac_tmp= trap 'exit_status=$? : "${ac_tmp:=$tmp}" { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 ac_tmp=$tmp # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$ac_tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove sole $(srcdir), # ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ h s/// s/^/:/ s/[ ]*$/:/ s/:\$(srcdir):/:/g s/:\${srcdir}:/:/g s/:@srcdir@:/:/g s/^:*// s/:*$// x s/\(=[ ]*\).*/\1/ G s/\n// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$ac_tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_tt=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_tt"; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$ac_tmp/stdin" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ "$ac_tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&2;} rm -f "$ac_tmp/stdin" case $ac_file in -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; esac \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" } >"$ac_tmp/config.h" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$ac_tmp/config.h" "$ac_file" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ || as_fn_error $? "could not create -" "$LINENO" 5 fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || $as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$_am_arg" : 'X\(//\)[^/]' \| \ X"$_am_arg" : 'X\(//\)$' \| \ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$_am_arg" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || { # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. # TODO: see whether this extra hack can be removed once we start # requiring Autoconf 2.70 or later. case $CONFIG_FILES in #( *\'*) : eval set x "$CONFIG_FILES" ;; #( *) : set x $CONFIG_FILES ;; #( *) : ;; esac shift # Used to flag and report bootstrapping failures. am_rc=0 for am_mf do # Strip MF so we end up with the name of the file. am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile which includes # dependency-tracking related rules and includes. # Grep'ing the whole file directly is not great: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ || continue am_dirpart=`$as_dirname -- "$am_mf" || $as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$am_mf" : 'X\(//\)[^/]' \| \ X"$am_mf" : 'X\(//\)$' \| \ X"$am_mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$am_mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` am_filepart=`$as_basename -- "$am_mf" || $as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \ X"$am_mf" : 'X\(//\)$' \| \ X"$am_mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$am_mf" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` { echo "$as_me:$LINENO: cd "$am_dirpart" \ && sed -e '/# am--include-marker/d' "$am_filepart" \ | $MAKE -f - am--depfiles" >&5 (cd "$am_dirpart" \ && sed -e '/# am--include-marker/d' "$am_filepart" \ | $MAKE -f - am--depfiles) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } || am_rc=$? done if test $am_rc -ne 0; then { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "Something went wrong bootstrapping makefile fragments for automatic dependency tracking. Try re-running configure with the '--disable-dependency-tracking' option to at least be able to build the package (albeit without support for automatic dependency tracking). See \`config.log' for more details" "$LINENO" 5; } fi { am_dirpart=; unset am_dirpart;} { am_filepart=; unset am_filepart;} { am_mf=; unset am_mf;} { am_rc=; unset am_rc;} rm -f conftest-deps.mk } ;; "libtool":C) # See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi cfgfile=${ofile}T trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # Generated automatically by $as_me ($PACKAGE) $VERSION # NOTE: Changes made to this file will be lost: look at ltmain.sh. # Provide generalized library-building support services. # Written by Gordon Matzigkeit, 1996 # Copyright (C) 2014 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of of the License, or # (at your option) any later version. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program or library that is built # using GNU Libtool, you may include this file under the same # distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # The names of the tagged configurations supported by this script. available_tags='' # Configured defaults for sys_lib_dlsearch_path munging. : \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} # ### BEGIN LIBTOOL CONFIG # Which release of libtool.m4 was used? macro_version=$macro_version macro_revision=$macro_revision # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # What type of objects to build. pic_mode=$pic_mode # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # Shared archive member basename,for filename based shared library versioning on AIX. shared_archive_member_spec=$shared_archive_member_spec # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # An echo program that protects backslashes. ECHO=$lt_ECHO # The PATH separator for the build system. PATH_SEPARATOR=$lt_PATH_SEPARATOR # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # A sed program that does not truncate output. SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="\$SED -e 1s/^X//" # A grep program that handles long lines. GREP=$lt_GREP # An ERE matcher. EGREP=$lt_EGREP # A literal string matcher. FGREP=$lt_FGREP # A BSD- or MS-compatible name lister. NM=$lt_NM # Whether we need soft or hard links. LN_S=$lt_LN_S # What is the maximum length of a command? max_cmd_len=$max_cmd_len # Object file suffix (normally "o"). objext=$ac_objext # Executable file suffix (normally ""). exeext=$exeext # whether the shell understands "unset". lt_unset=$lt_unset # turn spaces into newlines. SP2NL=$lt_lt_SP2NL # turn newlines into spaces. NL2SP=$lt_lt_NL2SP # convert \$build file names to \$host format. to_host_file_cmd=$lt_cv_to_host_file_cmd # convert \$build files to toolchain format. to_tool_file_cmd=$lt_cv_to_tool_file_cmd # An object symbol dumper. OBJDUMP=$lt_OBJDUMP # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method = "file_magic". file_magic_cmd=$lt_file_magic_cmd # How to find potential files when deplibs_check_method = "file_magic". file_magic_glob=$lt_file_magic_glob # Find potential files using nocaseglob when deplibs_check_method = "file_magic". want_nocaseglob=$lt_want_nocaseglob # DLL creation program. DLLTOOL=$lt_DLLTOOL # Command to associate shared and link libraries. sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd # The archiver. AR=$lt_AR # Flags to create an archive. AR_FLAGS=$lt_AR_FLAGS # How to feed a file listing to the archiver. archiver_list_spec=$lt_archiver_list_spec # A symbol stripping program. STRIP=$lt_STRIP # Commands used to install an old-style archive. RANLIB=$lt_RANLIB old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Whether to use a lock for old archive extraction. lock_old_archive_extraction=$lock_old_archive_extraction # A C compiler. LTCC=$lt_CC # LTCC compiler flags. LTCFLAGS=$lt_CFLAGS # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration. global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm into a list of symbols to manually relocate. global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import # Transform the output of nm in a C name address pair. global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # Transform the output of nm in a C name address pair when lib prefix is needed. global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix # The name lister interface. nm_interface=$lt_lt_cv_nm_interface # Specify filename containing input files for \$NM. nm_file_list_spec=$lt_nm_file_list_spec # The root where to search for dependent libraries,and where our libraries should be installed. lt_sysroot=$lt_sysroot # Command to truncate a binary pipe. lt_truncate_bin=$lt_lt_cv_truncate_bin # The name of the directory that contains temporary libtool files. objdir=$objdir # Used to examine libraries when file_magic_cmd begins with "file". MAGIC_CMD=$MAGIC_CMD # Must we lock files when doing compilation? need_locks=$lt_need_locks # Manifest tool. MANIFEST_TOOL=$lt_MANIFEST_TOOL # Tool to manipulate archived DWARF debug symbol files on Mac OS X. DSYMUTIL=$lt_DSYMUTIL # Tool to change global to local symbols on Mac OS X. NMEDIT=$lt_NMEDIT # Tool to manipulate fat objects and archives on Mac OS X. LIPO=$lt_LIPO # ldd/readelf like tool for Mach-O binaries on Mac OS X. OTOOL=$lt_OTOOL # ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. OTOOL64=$lt_OTOOL64 # Old archive suffix (normally "a"). libext=$libext # Shared library suffix (normally ".so"). shrext_cmds=$lt_shrext_cmds # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Variables whose values should be saved in libtool wrapper scripts and # restored at link time. variables_saved_for_relink=$lt_variables_saved_for_relink # Do we need the "lib" prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Library versioning type. version_type=$version_type # Shared library runtime path variable. runpath_var=$runpath_var # Shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Permission mode override for installation of shared libraries. install_override_mode=$lt_install_override_mode # Command to use after installation of a shared archive. postinstall_cmds=$lt_postinstall_cmds # Command to use after uninstallation of a shared archive. postuninstall_cmds=$lt_postuninstall_cmds # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # As "finish_cmds", except a single script fragment to be evaled but # not shown. finish_eval=$lt_finish_eval # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Compile-time system search path for libraries. sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Detected run-time system search path for libraries. sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path # Explicit LT_SYS_LIBRARY_PATH set during ./configure time. configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # The linker used to build libraries. LD=$lt_LD # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds # A language specific compiler. CC=$lt_compiler # Is the compiler the GNU compiler? with_gcc=$GCC # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc # Whether or not to disallow shared libs when runtime libs are static. allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec # Whether the compiler copes with passing no objects directly. compiler_needs_object=$lt_compiler_needs_object # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds # Commands used to build a shared archive. archive_cmds=$lt_archive_cmds archive_expsym_cmds=$lt_archive_expsym_cmds # Commands used to build a loadable module if different from building # a shared archive. module_cmds=$lt_module_cmds module_expsym_cmds=$lt_module_expsym_cmds # Whether we are building with GNU ld or not. with_gnu_ld=$lt_with_gnu_ld # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag # Flag that enforces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator # Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct # Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes # DIR into the resulting binary and the resulting library dependency is # "absolute",i.e impossible to change by setting \$shlibpath_var if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute # Set to "yes" if using the -LDIR flag during linking hardcodes DIR # into the resulting binary. hardcode_minus_L=$hardcode_minus_L # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR # into the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var # Set to "yes" if building a shared library automatically hardcodes DIR # into the library and all subsequent libraries and executables linked # against it. hardcode_automatic=$hardcode_automatic # Set to yes if linker adds runtime paths of dependent libraries # to runtime path list. inherit_rpath=$inherit_rpath # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms # Symbols that must always be exported. include_expsyms=$lt_include_expsyms # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds # Commands necessary for finishing linking programs. postlink_cmds=$lt_postlink_cmds # Specify filename containing input files. file_list_spec=$lt_file_list_spec # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action # ### END LIBTOOL CONFIG _LT_EOF cat <<'_LT_EOF' >> "$cfgfile" # ### BEGIN FUNCTIONS SHARED WITH CONFIGURE # func_munge_path_list VARIABLE PATH # ----------------------------------- # VARIABLE is name of variable containing _space_ separated list of # directories to be munged by the contents of PATH, which is string # having a format: # "DIR[:DIR]:" # string "DIR[ DIR]" will be prepended to VARIABLE # ":DIR[:DIR]" # string "DIR[ DIR]" will be appended to VARIABLE # "DIRP[:DIRP]::[DIRA:]DIRA" # string "DIRP[ DIRP]" will be prepended to VARIABLE and string # "DIRA[ DIRA]" will be appended to VARIABLE # "DIR[:DIR]" # VARIABLE will be replaced by "DIR[ DIR]" func_munge_path_list () { case x$2 in x) ;; *:) eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" ;; x:*) eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" ;; *::*) eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" ;; *) eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" ;; esac } # Calculate cc_basename. Skip known compiler wrappers and cross-prefix. func_cc_basename () { for cc_temp in $*""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` } # ### END FUNCTIONS SHARED WITH CONFIGURE _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac ltmain=$ac_aux_dir/ltmain.sh # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ;; esac done # for ac_tag as_fn_exit 0 _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit 1 fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi echo "" echo "libgeotiff configuration summary:" echo "" echo " Version..................: ${RELEASE_VERSION}" echo " Installation directory...: ${prefix}" echo " C compiler...............: ${CC} ${CFLAGS}" echo " Debugging support........: ${enable_debug}" echo "" echo " zlib support......: ${ZIP_CONFIG}" echo " jpeg support......: ${JPEG_CONFIG}" echo " TIFF support......: ${TIFF_CONFIG}" echo " -INCLUDE .......: ${TIFF_INC}" echo " -PREFIX ........: ${TIFF_PREFIX}" echo " PROJ support......: yes" echo " -INCLUDE .......: ${PROJ_INCLUDE}" echo " LIBS.....................: ${LIBS}" echo "" echo " libgeotiff - http://trac.osgeo.org/geotiff" echo "" libgeotiff-1.7.4/geo_config.h.vc0000664000175000017500000000126014020740032013426 00000000000000#ifndef GEO_CONFIG_H #define GEO_CONFIG_H /* Define if you have the ANSI C header files. */ #ifndef STDC_HEADERS #define STDC_HEADERS 1 #endif /* Define if your processor stores words with the most significant byte first (like Motorola and SPARC, unlike Intel and VAX). */ /* #undef WORDS_BIGENDIAN */ /* Define if you have the header file. */ #ifndef HAVE_STDLIB_H #define HAVE_STDLIB_H 1 #endif /* Define if you have the header file. */ #ifndef HAVE_STRING_H #define HAVE_STRING_H 1 #endif /* Build as DLL */ #define BUILD_AS_DLL 1 /* Turn off TOWGS84 if necessary */ /* #define GEO_NORMALIZE_DISABLE_TOWGS84 1 */ #endif /* ndef GEO_CONFIG_H */ libgeotiff-1.7.4/epsg_proj.inc0000664000175000017500000004222314020740032013236 00000000000000/* * EPSG/POSC Projection Codes - GeoTIFF Rev 0.2 */ /* C database for Geotiff include files. */ /* the macro ValuePair() must be defined */ /* by the enclosing include file */ #ifdef INCLUDE_OLD_CODES #include old_proj.inc #endif /* OLD Codes */ /* New codes */ ValuePair(Proj_Stereo_70,19926) /* old codes */ ValuePair(Proj_Alabama_CS27_East, 10101) ValuePair(Proj_Alabama_CS27_West, 10102) ValuePair(Proj_Alabama_CS83_East, 10131) ValuePair(Proj_Alabama_CS83_West, 10132) ValuePair(Proj_Arizona_Coordinate_System_east, 10201) ValuePair(Proj_Arizona_Coordinate_System_Central, 10202) ValuePair(Proj_Arizona_Coordinate_System_west, 10203) ValuePair(Proj_Arizona_CS83_east, 10231) ValuePair(Proj_Arizona_CS83_Central, 10232) ValuePair(Proj_Arizona_CS83_west, 10233) ValuePair(Proj_Arkansas_CS27_North, 10301) ValuePair(Proj_Arkansas_CS27_South, 10302) ValuePair(Proj_Arkansas_CS83_North, 10331) ValuePair(Proj_Arkansas_CS83_South, 10332) ValuePair(Proj_California_CS27_I, 10401) ValuePair(Proj_California_CS27_II, 10402) ValuePair(Proj_California_CS27_III, 10403) ValuePair(Proj_California_CS27_IV, 10404) ValuePair(Proj_California_CS27_V, 10405) ValuePair(Proj_California_CS27_VI, 10406) ValuePair(Proj_California_CS27_VII, 10407) ValuePair(Proj_California_CS83_1, 10431) ValuePair(Proj_California_CS83_2, 10432) ValuePair(Proj_California_CS83_3, 10433) ValuePair(Proj_California_CS83_4, 10434) ValuePair(Proj_California_CS83_5, 10435) ValuePair(Proj_California_CS83_6, 10436) ValuePair(Proj_Colorado_CS27_North, 10501) ValuePair(Proj_Colorado_CS27_Central, 10502) ValuePair(Proj_Colorado_CS27_South, 10503) ValuePair(Proj_Colorado_CS83_North, 10531) ValuePair(Proj_Colorado_CS83_Central, 10532) ValuePair(Proj_Colorado_CS83_South, 10533) ValuePair(Proj_Connecticut_CS27, 10600) ValuePair(Proj_Connecticut_CS83, 10630) ValuePair(Proj_Delaware_CS27, 10700) ValuePair(Proj_Delaware_CS83, 10730) ValuePair(Proj_Florida_CS27_East, 10901) ValuePair(Proj_Florida_CS27_West, 10902) ValuePair(Proj_Florida_CS27_North, 10903) ValuePair(Proj_Florida_CS83_East, 10931) ValuePair(Proj_Florida_CS83_West, 10932) ValuePair(Proj_Florida_CS83_North, 10933) ValuePair(Proj_Georgia_CS27_East, 11001) ValuePair(Proj_Georgia_CS27_West, 11002) ValuePair(Proj_Georgia_CS83_East, 11031) ValuePair(Proj_Georgia_CS83_West, 11032) ValuePair(Proj_Idaho_CS27_East, 11101) ValuePair(Proj_Idaho_CS27_Central, 11102) ValuePair(Proj_Idaho_CS27_West, 11103) ValuePair(Proj_Idaho_CS83_East, 11131) ValuePair(Proj_Idaho_CS83_Central, 11132) ValuePair(Proj_Idaho_CS83_West, 11133) ValuePair(Proj_Illinois_CS27_East, 11201) ValuePair(Proj_Illinois_CS27_West, 11202) ValuePair(Proj_Illinois_CS83_East, 11231) ValuePair(Proj_Illinois_CS83_West, 11232) ValuePair(Proj_Indiana_CS27_East, 11301) ValuePair(Proj_Indiana_CS27_West, 11302) ValuePair(Proj_Indiana_CS83_East, 11331) ValuePair(Proj_Indiana_CS83_West, 11332) ValuePair(Proj_Iowa_CS27_North, 11401) ValuePair(Proj_Iowa_CS27_South, 11402) ValuePair(Proj_Iowa_CS83_North, 11431) ValuePair(Proj_Iowa_CS83_South, 11432) ValuePair(Proj_Kansas_CS27_North, 11501) ValuePair(Proj_Kansas_CS27_South, 11502) ValuePair(Proj_Kansas_CS83_North, 11531) ValuePair(Proj_Kansas_CS83_South, 11532) ValuePair(Proj_Kentucky_CS27_North, 11601) ValuePair(Proj_Kentucky_CS27_South, 11602) ValuePair(Proj_Kentucky_CS83_North, 15303) ValuePair(Proj_Kentucky_CS83_South, 11632) ValuePair(Proj_Louisiana_CS27_North, 11701) ValuePair(Proj_Louisiana_CS27_South, 11702) ValuePair(Proj_Louisiana_CS83_North, 11731) ValuePair(Proj_Louisiana_CS83_South, 11732) ValuePair(Proj_Maine_CS27_East, 11801) ValuePair(Proj_Maine_CS27_West, 11802) ValuePair(Proj_Maine_CS83_East, 11831) ValuePair(Proj_Maine_CS83_West, 11832) ValuePair(Proj_Maryland_CS27, 11900) ValuePair(Proj_Maryland_CS83, 11930) ValuePair(Proj_Massachusetts_CS27_Mainland, 12001) ValuePair(Proj_Massachusetts_CS27_Island, 12002) ValuePair(Proj_Massachusetts_CS83_Mainland, 12031) ValuePair(Proj_Massachusetts_CS83_Island, 12032) ValuePair(Proj_Michigan_State_Plane_East, 12101) ValuePair(Proj_Michigan_State_Plane_Old_Central, 12102) ValuePair(Proj_Michigan_State_Plane_West, 12103) ValuePair(Proj_Michigan_CS27_North, 12111) ValuePair(Proj_Michigan_CS27_Central, 12112) ValuePair(Proj_Michigan_CS27_South, 12113) ValuePair(Proj_Michigan_CS83_North, 12141) ValuePair(Proj_Michigan_CS83_Central, 12142) ValuePair(Proj_Michigan_CS83_South, 12143) ValuePair(Proj_Minnesota_CS27_North, 12201) ValuePair(Proj_Minnesota_CS27_Central, 12202) ValuePair(Proj_Minnesota_CS27_South, 12203) ValuePair(Proj_Minnesota_CS83_North, 12231) ValuePair(Proj_Minnesota_CS83_Central, 12232) ValuePair(Proj_Minnesota_CS83_South, 12233) ValuePair(Proj_Mississippi_CS27_East, 12301) ValuePair(Proj_Mississippi_CS27_West, 12302) ValuePair(Proj_Mississippi_CS83_East, 12331) ValuePair(Proj_Mississippi_CS83_West, 12332) ValuePair(Proj_Missouri_CS27_East, 12401) ValuePair(Proj_Missouri_CS27_Central, 12402) ValuePair(Proj_Missouri_CS27_West, 12403) ValuePair(Proj_Missouri_CS83_East, 12431) ValuePair(Proj_Missouri_CS83_Central, 12432) ValuePair(Proj_Missouri_CS83_West, 12433) ValuePair(Proj_Montana_CS27_North, 12501) ValuePair(Proj_Montana_CS27_Central, 12502) ValuePair(Proj_Montana_CS27_South, 12503) ValuePair(Proj_Montana_CS83, 12530) ValuePair(Proj_Nebraska_CS27_North, 12601) ValuePair(Proj_Nebraska_CS27_South, 12602) ValuePair(Proj_Nebraska_CS83, 12630) ValuePair(Proj_Nevada_CS27_East, 12701) ValuePair(Proj_Nevada_CS27_Central, 12702) ValuePair(Proj_Nevada_CS27_West, 12703) ValuePair(Proj_Nevada_CS83_East, 12731) ValuePair(Proj_Nevada_CS83_Central, 12732) ValuePair(Proj_Nevada_CS83_West, 12733) ValuePair(Proj_New_Hampshire_CS27, 12800) ValuePair(Proj_New_Hampshire_CS83, 12830) ValuePair(Proj_New_Jersey_CS27, 12900) ValuePair(Proj_New_Jersey_CS83, 12930) ValuePair(Proj_New_Mexico_CS27_East, 13001) ValuePair(Proj_New_Mexico_CS27_Central, 13002) ValuePair(Proj_New_Mexico_CS27_West, 13003) ValuePair(Proj_New_Mexico_CS83_East, 13031) ValuePair(Proj_New_Mexico_CS83_Central, 13032) ValuePair(Proj_New_Mexico_CS83_West, 13033) ValuePair(Proj_New_York_CS27_East, 13101) ValuePair(Proj_New_York_CS27_Central, 13102) ValuePair(Proj_New_York_CS27_West, 13103) ValuePair(Proj_New_York_CS27_Long_Island, 13104) ValuePair(Proj_New_York_CS83_East, 13131) ValuePair(Proj_New_York_CS83_Central, 13132) ValuePair(Proj_New_York_CS83_West, 13133) ValuePair(Proj_New_York_CS83_Long_Island, 13134) ValuePair(Proj_North_Carolina_CS27, 13200) ValuePair(Proj_North_Carolina_CS83, 13230) ValuePair(Proj_North_Dakota_CS27_North, 13301) ValuePair(Proj_North_Dakota_CS27_South, 13302) ValuePair(Proj_North_Dakota_CS83_North, 13331) ValuePair(Proj_North_Dakota_CS83_South, 13332) ValuePair(Proj_Ohio_CS27_North, 13401) ValuePair(Proj_Ohio_CS27_South, 13402) ValuePair(Proj_Ohio_CS83_North, 13431) ValuePair(Proj_Ohio_CS83_South, 13432) ValuePair(Proj_Oklahoma_CS27_North, 13501) ValuePair(Proj_Oklahoma_CS27_South, 13502) ValuePair(Proj_Oklahoma_CS83_North, 13531) ValuePair(Proj_Oklahoma_CS83_South, 13532) ValuePair(Proj_Oregon_CS27_North, 13601) ValuePair(Proj_Oregon_CS27_South, 13602) ValuePair(Proj_Oregon_CS83_North, 13631) ValuePair(Proj_Oregon_CS83_South, 13632) ValuePair(Proj_Pennsylvania_CS27_North, 13701) ValuePair(Proj_Pennsylvania_CS27_South, 13702) ValuePair(Proj_Pennsylvania_CS83_North, 13731) ValuePair(Proj_Pennsylvania_CS83_South, 13732) ValuePair(Proj_Rhode_Island_CS27, 13800) ValuePair(Proj_Rhode_Island_CS83, 13830) ValuePair(Proj_South_Carolina_CS27_North, 13901) ValuePair(Proj_South_Carolina_CS27_South, 13902) ValuePair(Proj_South_Carolina_CS83, 13930) ValuePair(Proj_South_Dakota_CS27_North, 14001) ValuePair(Proj_South_Dakota_CS27_South, 14002) ValuePair(Proj_South_Dakota_CS83_North, 14031) ValuePair(Proj_South_Dakota_CS83_South, 14032) ValuePair(Proj_Tennessee_CS27, 15302) ValuePair(Proj_Tennessee_CS83, 14130) ValuePair(Proj_Texas_CS27_North, 14201) ValuePair(Proj_Texas_CS27_North_Central, 14202) ValuePair(Proj_Texas_CS27_Central, 14203) ValuePair(Proj_Texas_CS27_South_Central, 14204) ValuePair(Proj_Texas_CS27_South, 14205) ValuePair(Proj_Texas_CS83_North, 14231) ValuePair(Proj_Texas_CS83_North_Central, 14232) ValuePair(Proj_Texas_CS83_Central, 14233) ValuePair(Proj_Texas_CS83_South_Central, 14234) ValuePair(Proj_Texas_CS83_South, 14235) ValuePair(Proj_Utah_CS27_North, 14301) ValuePair(Proj_Utah_CS27_Central, 14302) ValuePair(Proj_Utah_CS27_South, 14303) ValuePair(Proj_Utah_CS83_North, 14331) ValuePair(Proj_Utah_CS83_Central, 14332) ValuePair(Proj_Utah_CS83_South, 14333) ValuePair(Proj_Vermont_CS27, 14400) ValuePair(Proj_Vermont_CS83, 14430) ValuePair(Proj_Virginia_CS27_North, 14501) ValuePair(Proj_Virginia_CS27_South, 14502) ValuePair(Proj_Virginia_CS83_North, 14531) ValuePair(Proj_Virginia_CS83_South, 14532) ValuePair(Proj_Washington_CS27_North, 14601) ValuePair(Proj_Washington_CS27_South, 14602) ValuePair(Proj_Washington_CS83_North, 14631) ValuePair(Proj_Washington_CS83_South, 14632) ValuePair(Proj_West_Virginia_CS27_North, 14701) ValuePair(Proj_West_Virginia_CS27_South, 14702) ValuePair(Proj_West_Virginia_CS83_North, 14731) ValuePair(Proj_West_Virginia_CS83_South, 14732) ValuePair(Proj_Wisconsin_CS27_North, 14801) ValuePair(Proj_Wisconsin_CS27_Central, 14802) ValuePair(Proj_Wisconsin_CS27_South, 14803) ValuePair(Proj_Wisconsin_CS83_North, 14831) ValuePair(Proj_Wisconsin_CS83_Central, 14832) ValuePair(Proj_Wisconsin_CS83_South, 14833) ValuePair(Proj_Wyoming_CS27_East, 14901) ValuePair(Proj_Wyoming_CS27_East_Central, 14902) ValuePair(Proj_Wyoming_CS27_West_Central, 14903) ValuePair(Proj_Wyoming_CS27_West, 14904) ValuePair(Proj_Wyoming_CS83_East, 14931) ValuePair(Proj_Wyoming_CS83_East_Central, 14932) ValuePair(Proj_Wyoming_CS83_West_Central, 14933) ValuePair(Proj_Wyoming_CS83_West, 14934) ValuePair(Proj_Alaska_CS27_1, 15001) ValuePair(Proj_Alaska_CS27_2, 15002) ValuePair(Proj_Alaska_CS27_3, 15003) ValuePair(Proj_Alaska_CS27_4, 15004) ValuePair(Proj_Alaska_CS27_5, 15005) ValuePair(Proj_Alaska_CS27_6, 15006) ValuePair(Proj_Alaska_CS27_7, 15007) ValuePair(Proj_Alaska_CS27_8, 15008) ValuePair(Proj_Alaska_CS27_9, 15009) ValuePair(Proj_Alaska_CS27_10, 15010) ValuePair(Proj_Alaska_CS83_1, 15031) ValuePair(Proj_Alaska_CS83_2, 15032) ValuePair(Proj_Alaska_CS83_3, 15033) ValuePair(Proj_Alaska_CS83_4, 15034) ValuePair(Proj_Alaska_CS83_5, 15035) ValuePair(Proj_Alaska_CS83_6, 15036) ValuePair(Proj_Alaska_CS83_7, 15037) ValuePair(Proj_Alaska_CS83_8, 15038) ValuePair(Proj_Alaska_CS83_9, 15039) ValuePair(Proj_Alaska_CS83_10, 15040) ValuePair(Proj_Hawaii_CS27_1, 15101) ValuePair(Proj_Hawaii_CS27_2, 15102) ValuePair(Proj_Hawaii_CS27_3, 15103) ValuePair(Proj_Hawaii_CS27_4, 15104) ValuePair(Proj_Hawaii_CS27_5, 15105) ValuePair(Proj_Hawaii_CS83_1, 15131) ValuePair(Proj_Hawaii_CS83_2, 15132) ValuePair(Proj_Hawaii_CS83_3, 15133) ValuePair(Proj_Hawaii_CS83_4, 15134) ValuePair(Proj_Hawaii_CS83_5, 15135) ValuePair(Proj_Puerto_Rico_CS27, 15201) ValuePair(Proj_St_Croix, 15202) ValuePair(Proj_Puerto_Rico_Virgin_Is, 15230) ValuePair(Proj_BLM_14N_feet, 15914) ValuePair(Proj_BLM_15N_feet, 15915) ValuePair(Proj_BLM_16N_feet, 15916) ValuePair(Proj_BLM_17N_feet, 15917) ValuePair(Proj_UTM_zone_1N, 16001) ValuePair(Proj_UTM_zone_2N, 16002) ValuePair(Proj_UTM_zone_3N, 16003) ValuePair(Proj_UTM_zone_4N, 16004) ValuePair(Proj_UTM_zone_5N, 16005) ValuePair(Proj_UTM_zone_6N, 16006) ValuePair(Proj_UTM_zone_7N, 16007) ValuePair(Proj_UTM_zone_8N, 16008) ValuePair(Proj_UTM_zone_9N, 16009) ValuePair(Proj_UTM_zone_10N, 16010) ValuePair(Proj_UTM_zone_11N, 16011) ValuePair(Proj_UTM_zone_12N, 16012) ValuePair(Proj_UTM_zone_13N, 16013) ValuePair(Proj_UTM_zone_14N, 16014) ValuePair(Proj_UTM_zone_15N, 16015) ValuePair(Proj_UTM_zone_16N, 16016) ValuePair(Proj_UTM_zone_17N, 16017) ValuePair(Proj_UTM_zone_18N, 16018) ValuePair(Proj_UTM_zone_19N, 16019) ValuePair(Proj_UTM_zone_20N, 16020) ValuePair(Proj_UTM_zone_21N, 16021) ValuePair(Proj_UTM_zone_22N, 16022) ValuePair(Proj_UTM_zone_23N, 16023) ValuePair(Proj_UTM_zone_24N, 16024) ValuePair(Proj_UTM_zone_25N, 16025) ValuePair(Proj_UTM_zone_26N, 16026) ValuePair(Proj_UTM_zone_27N, 16027) ValuePair(Proj_UTM_zone_28N, 16028) ValuePair(Proj_UTM_zone_29N, 16029) ValuePair(Proj_UTM_zone_30N, 16030) ValuePair(Proj_UTM_zone_31N, 16031) ValuePair(Proj_UTM_zone_32N, 16032) ValuePair(Proj_UTM_zone_33N, 16033) ValuePair(Proj_UTM_zone_34N, 16034) ValuePair(Proj_UTM_zone_35N, 16035) ValuePair(Proj_UTM_zone_36N, 16036) ValuePair(Proj_UTM_zone_37N, 16037) ValuePair(Proj_UTM_zone_38N, 16038) ValuePair(Proj_UTM_zone_39N, 16039) ValuePair(Proj_UTM_zone_40N, 16040) ValuePair(Proj_UTM_zone_41N, 16041) ValuePair(Proj_UTM_zone_42N, 16042) ValuePair(Proj_UTM_zone_43N, 16043) ValuePair(Proj_UTM_zone_44N, 16044) ValuePair(Proj_UTM_zone_45N, 16045) ValuePair(Proj_UTM_zone_46N, 16046) ValuePair(Proj_UTM_zone_47N, 16047) ValuePair(Proj_UTM_zone_48N, 16048) ValuePair(Proj_UTM_zone_49N, 16049) ValuePair(Proj_UTM_zone_50N, 16050) ValuePair(Proj_UTM_zone_51N, 16051) ValuePair(Proj_UTM_zone_52N, 16052) ValuePair(Proj_UTM_zone_53N, 16053) ValuePair(Proj_UTM_zone_54N, 16054) ValuePair(Proj_UTM_zone_55N, 16055) ValuePair(Proj_UTM_zone_56N, 16056) ValuePair(Proj_UTM_zone_57N, 16057) ValuePair(Proj_UTM_zone_58N, 16058) ValuePair(Proj_UTM_zone_59N, 16059) ValuePair(Proj_UTM_zone_60N, 16060) ValuePair(Proj_UTM_zone_1S, 16101) ValuePair(Proj_UTM_zone_2S, 16102) ValuePair(Proj_UTM_zone_3S, 16103) ValuePair(Proj_UTM_zone_4S, 16104) ValuePair(Proj_UTM_zone_5S, 16105) ValuePair(Proj_UTM_zone_6S, 16106) ValuePair(Proj_UTM_zone_7S, 16107) ValuePair(Proj_UTM_zone_8S, 16108) ValuePair(Proj_UTM_zone_9S, 16109) ValuePair(Proj_UTM_zone_10S, 16110) ValuePair(Proj_UTM_zone_11S, 16111) ValuePair(Proj_UTM_zone_12S, 16112) ValuePair(Proj_UTM_zone_13S, 16113) ValuePair(Proj_UTM_zone_14S, 16114) ValuePair(Proj_UTM_zone_15S, 16115) ValuePair(Proj_UTM_zone_16S, 16116) ValuePair(Proj_UTM_zone_17S, 16117) ValuePair(Proj_UTM_zone_18S, 16118) ValuePair(Proj_UTM_zone_19S, 16119) ValuePair(Proj_UTM_zone_20S, 16120) ValuePair(Proj_UTM_zone_21S, 16121) ValuePair(Proj_UTM_zone_22S, 16122) ValuePair(Proj_UTM_zone_23S, 16123) ValuePair(Proj_UTM_zone_24S, 16124) ValuePair(Proj_UTM_zone_25S, 16125) ValuePair(Proj_UTM_zone_26S, 16126) ValuePair(Proj_UTM_zone_27S, 16127) ValuePair(Proj_UTM_zone_28S, 16128) ValuePair(Proj_UTM_zone_29S, 16129) ValuePair(Proj_UTM_zone_30S, 16130) ValuePair(Proj_UTM_zone_31S, 16131) ValuePair(Proj_UTM_zone_32S, 16132) ValuePair(Proj_UTM_zone_33S, 16133) ValuePair(Proj_UTM_zone_34S, 16134) ValuePair(Proj_UTM_zone_35S, 16135) ValuePair(Proj_UTM_zone_36S, 16136) ValuePair(Proj_UTM_zone_37S, 16137) ValuePair(Proj_UTM_zone_38S, 16138) ValuePair(Proj_UTM_zone_39S, 16139) ValuePair(Proj_UTM_zone_40S, 16140) ValuePair(Proj_UTM_zone_41S, 16141) ValuePair(Proj_UTM_zone_42S, 16142) ValuePair(Proj_UTM_zone_43S, 16143) ValuePair(Proj_UTM_zone_44S, 16144) ValuePair(Proj_UTM_zone_45S, 16145) ValuePair(Proj_UTM_zone_46S, 16146) ValuePair(Proj_UTM_zone_47S, 16147) ValuePair(Proj_UTM_zone_48S, 16148) ValuePair(Proj_UTM_zone_49S, 16149) ValuePair(Proj_UTM_zone_50S, 16150) ValuePair(Proj_UTM_zone_51S, 16151) ValuePair(Proj_UTM_zone_52S, 16152) ValuePair(Proj_UTM_zone_53S, 16153) ValuePair(Proj_UTM_zone_54S, 16154) ValuePair(Proj_UTM_zone_55S, 16155) ValuePair(Proj_UTM_zone_56S, 16156) ValuePair(Proj_UTM_zone_57S, 16157) ValuePair(Proj_UTM_zone_58S, 16158) ValuePair(Proj_UTM_zone_59S, 16159) ValuePair(Proj_UTM_zone_60S, 16160) ValuePair(Proj_Gauss_Kruger_zone_0, 16200) ValuePair(Proj_Gauss_Kruger_zone_1, 16201) ValuePair(Proj_Gauss_Kruger_zone_2, 16202) ValuePair(Proj_Gauss_Kruger_zone_3, 16203) ValuePair(Proj_Gauss_Kruger_zone_4, 16204) ValuePair(Proj_Gauss_Kruger_zone_5, 16205) ValuePair(Proj_Map_Grid_of_Australia_48, 17348) ValuePair(Proj_Map_Grid_of_Australia_49, 17349) ValuePair(Proj_Map_Grid_of_Australia_50, 17350) ValuePair(Proj_Map_Grid_of_Australia_51, 17351) ValuePair(Proj_Map_Grid_of_Australia_52, 17352) ValuePair(Proj_Map_Grid_of_Australia_53, 17353) ValuePair(Proj_Map_Grid_of_Australia_54, 17354) ValuePair(Proj_Map_Grid_of_Australia_55, 17355) ValuePair(Proj_Map_Grid_of_Australia_56, 17356) ValuePair(Proj_Map_Grid_of_Australia_57, 17357) ValuePair(Proj_Map_Grid_of_Australia_58, 17358) ValuePair(Proj_Australian_Map_Grid_48, 17448) ValuePair(Proj_Australian_Map_Grid_49, 17449) ValuePair(Proj_Australian_Map_Grid_50, 17450) ValuePair(Proj_Australian_Map_Grid_51, 17451) ValuePair(Proj_Australian_Map_Grid_52, 17452) ValuePair(Proj_Australian_Map_Grid_53, 17453) ValuePair(Proj_Australian_Map_Grid_54, 17454) ValuePair(Proj_Australian_Map_Grid_55, 17455) ValuePair(Proj_Australian_Map_Grid_56, 17456) ValuePair(Proj_Australian_Map_Grid_57, 17457) ValuePair(Proj_Australian_Map_Grid_58, 17458) ValuePair(Proj_Argentina_1, 18031) ValuePair(Proj_Argentina_2, 18032) ValuePair(Proj_Argentina_3, 18033) ValuePair(Proj_Argentina_4, 18034) ValuePair(Proj_Argentina_5, 18035) ValuePair(Proj_Argentina_6, 18036) ValuePair(Proj_Argentina_7, 18037) ValuePair(Proj_Colombia_3W, 18051) ValuePair(Proj_Colombia_Bogota, 18052) ValuePair(Proj_Colombia_3E, 18053) ValuePair(Proj_Colombia_6E, 18054) ValuePair(Proj_Egypt_Red_Belt, 18072) ValuePair(Proj_Egypt_Purple_Belt, 18073) ValuePair(Proj_Extended_Purple_Belt, 18074) ValuePair(Proj_New_Zealand_North_Island_Nat_Grid, 18141) ValuePair(Proj_New_Zealand_South_Island_Nat_Grid, 18142) ValuePair(Proj_Bahrain_Grid, 19900) ValuePair(Proj_Netherlands_E_Indies_Equatorial, 19905) ValuePair(Proj_RSO_Borneo, 19912) /* end of list */ libgeotiff-1.7.4/cmake/0000775000175000017500000000000014755113373011731 500000000000000libgeotiff-1.7.4/cmake/FindPROJ.cmake0000664000175000017500000000637014627631241014231 00000000000000# Distributed under the OSI-approved BSD 3-Clause License. See accompanying # file COPYING-CMAKE-SCRIPTS or https://cmake.org/licensing for details. #[=======================================================================[.rst: FindPROJ --------- CMake module to search for PROJ(PROJ.4 and PROJ) library On success, the macro sets the following variables: ``PROJ_FOUND`` if the library found ``PROJ_LIBRARIES`` full path to the library ``PROJ_INCLUDE_DIRS`` where to find the library headers ``PROJ_VERSION_STRING`` version string of PROJ Copyright (c) 2009 Mateusz Loskot Copyright (c) 2015 NextGIS Copyright (c) 2018 Hiroshi Miura #]=======================================================================] find_path(PROJ_INCLUDE_DIR proj.h PATHS ${PROJ_ROOT}/include DOC "Path to PROJ library include directory") set(PROJ_NAMES ${PROJ_NAMES} proj proj_i) set(PROJ_NAMES_DEBUG ${PROJ_NAMES_DEBUG} projd proj_d) if(NOT PROJ_LIBRARY) find_library(PROJ_LIBRARY_RELEASE NAMES ${PROJ_NAMES}) find_library(PROJ_LIBRARY_DEBUG NAMES ${PROJ_NAMES_DEBUG}) include(SelectLibraryConfigurations) select_library_configurations(PROJ) mark_as_advanced(PROJ_LIBRARY_RELEASE PROJ_LIBRARY_DEBUG) endif() unset(PROJ_NAMES) unset(PROJ_NAMES_DEBUG) if(PROJ_INCLUDE_DIR) file(READ "${PROJ_INCLUDE_DIR}/proj.h" PROJ_H_CONTENTS) string(REGEX REPLACE "^.*PROJ_VERSION_MAJOR +([0-9]+).*$" "\\1" PROJ_VERSION_MAJOR "${PROJ_H_CONTENTS}") string(REGEX REPLACE "^.*PROJ_VERSION_MINOR +([0-9]+).*$" "\\1" PROJ_VERSION_MINOR "${PROJ_H_CONTENTS}") string(REGEX REPLACE "^.*PROJ_VERSION_PATCH +([0-9]+).*$" "\\1" PROJ_VERSION_PATCH "${PROJ_H_CONTENTS}") unset(PROJ_H_CONTENTS) set(PROJ_VERSION_STRING "${PROJ_VERSION_MAJOR}.${PROJ_VERSION_MINOR}.${PROJ_VERSION_PATCH}") endif () include(FindPackageHandleStandardArgs) find_package_handle_standard_args(PROJ REQUIRED_VARS PROJ_LIBRARY PROJ_INCLUDE_DIR VERSION_VAR PROJ_VERSION_STRING) mark_as_advanced(PROJ_INCLUDE_DIR PROJ_LIBRARY) if(PROJ_FOUND) set(PROJ_LIBRARIES "${PROJ_LIBRARY}") set(PROJ_INCLUDE_DIRS "${PROJ_INCLUDE_DIR}") if(NOT TARGET PROJ::proj) add_library(PROJ::proj UNKNOWN IMPORTED) set_target_properties(PROJ::proj PROPERTIES INTERFACE_INCLUDE_DIRECTORIES "${PROJ_INCLUDE_DIR}" IMPORTED_LINK_INTERFACE_LANGUAGES "C") if(EXISTS "${PROJ_LIBRARY}") set_target_properties(PROJ::proj PROPERTIES IMPORTED_LINK_INTERFACE_LANGUAGES "C" IMPORTED_LOCATION "${PROJ_LIBRARY}") endif() if(EXISTS "${PROJ_LIBRARY_RELEASE}") set_property(TARGET PROJ::proj APPEND PROPERTY IMPORTED_CONFIGURATIONS RELEASE) set_target_properties(PROJ::proj PROPERTIES IMPORTED_LINK_INTERFACE_LANGUAGES_RELEASE "C" IMPORTED_LOCATION_RELEASE "${PROJ_LIBRARY_RELEASE}") endif() if(EXISTS "${PROJ_LIBRARY_DEBUG}") set_property(TARGET PROJ::proj APPEND PROPERTY IMPORTED_CONFIGURATIONS DEBUG) set_target_properties(PROJ::proj PROPERTIES IMPORTED_LINK_INTERFACE_LANGUAGES_DEBUG "C" IMPORTED_LOCATION_DEBUG "${PROJ_LIBRARY_DEBUG}") endif() endif() endif() libgeotiff-1.7.4/cmake/geo_config.h.in0000664000175000017500000000032414622755317014530 00000000000000#ifndef GEO_CONFIG_H #define GEO_CONFIG_H /* Define if you have the header file. */ #cmakedefine GEOTIFF_HAVE_STRINGS_H 1 #cmakedefine GEO_NORMALIZE_DISABLE_TOWGS84 #endif /* ndef GEO_CONFIG_H */ libgeotiff-1.7.4/cmake/CMakeLists.txt0000664000175000017500000000457114627631241014415 00000000000000############################################################################# # Config file generation and installation ############################################################################# # geotiff-config.cmake for the install tree. It's installed in # ${INSTALL_CMAKE_DIR} and @PROJECT_ROOT_DIR@ is the relative # path to the root from there. (Note that the whole install tree can # be relocated.) if (NOT WIN32) set (INSTALL_CMAKE_DIR "share/cmake/${PROJECT_NAME}") set (PROJECT_ROOT_DIR "../../..") else () set (INSTALL_CMAKE_DIR "cmake") set (PROJECT_ROOT_DIR "..") endif () configure_file (project-config.cmake.in project-config.cmake @ONLY) configure_file (project-config-version.cmake.in project-config-version.cmake @ONLY) install (FILES "${CMAKE_CURRENT_BINARY_DIR}/project-config.cmake" DESTINATION "${INSTALL_CMAKE_DIR}" RENAME "${PROJECT_NAME_LOWER}-config.cmake") install (FILES "${CMAKE_CURRENT_BINARY_DIR}/project-config-version.cmake" DESTINATION "${INSTALL_CMAKE_DIR}" RENAME "${PROJECT_NAME_LOWER}-config-version.cmake") # Make information about the cmake targets (the library and the tools) # available. install (EXPORT depends FILE ${PROJECT_NAME_LOWER}-depends.cmake DESTINATION "${INSTALL_CMAKE_DIR}") # ------------------------------------------------------------------------------ # CPACK controls #------------------------------------------------------------------------------ SET(CPACK_PACKAGE_VERSION_MAJOR ${PROJECT_VERSION_MAJOR}) SET(CPACK_PACKAGE_VERSION_MINOR ${PROJECT_VERSION_MINOR}) SET(CPACK_PACKAGE_VERSION_PATCH ${PROJECT_VERSION_PATCH}) SET(CPACK_PACKAGE_NAME "GeoTIFF") SET(CPACK_SOURCE_GENERATOR "TBZ2;TGZ;ZIP") SET(CPACK_PACKAGE_VENDOR "GeoTIFF Development Team") SET(CPACK_RESOURCE_FILE_LICENSE "${PROJECT_SOURCE_DIR}/LICENSE") set(CPACK_SOURCE_PACKAGE_FILE_NAME "lib${PROJECT_NAME_LOWER}-${GeoTIFF_VERSION}") set(CPACK_SOURCE_IGNORE_FILES "/\\\\.gitattributes" "/\\\\.DS_Store" "/\\\\.git/" "\\\\.swp$" "~$" "\\\\.\\\\#" "/\\\\#" "CMakeScripts/" "COPYING-CMAKE-SCRIPTS" "_CPack_Packages" "cmake_install.cmake" ".gitignore" ".ninja" ".deps" "HOWTORELEASE.txt" "README" "build/" "CMakeFiles" "CTestTestfile.cmake" ".gz" ".bz2" ) include(CPack) add_custom_target(dist COMMAND ${CMAKE_MAKE_PROGRAM} package_source) libgeotiff-1.7.4/cmake/project-config.cmake.in0000664000175000017500000000400714622755317016175 00000000000000# Configure @PROJECT_NAME@ # # Set # @PROJECT_NAME@_FOUND = 1 # @PROJECT_NAME@_INCLUDE_DIRS = /usr/local/include # @PROJECT_NAME@_LIBRARY_DIRS = /usr/local/lib # @PROJECT_NAME@_BINARY_DIRS = /usr/local/bin # @PROJECT_NAME@_VERSION = 1.4.1 (for example) # For compatibility with FindGeoTIFF.cmake, also set # @PROJECT_NAME_UPPER@_FOUND # @PROJECT_NAME_UPPER@_INCLUDE_DIR # @PROJECT_NAME_UPPER@_LIBRARY # @PROJECT_NAME_UPPER@_LIBRARIES # Tell the user project where to find our headers and libraries get_filename_component (_DIR ${CMAKE_CURRENT_LIST_FILE} PATH) get_filename_component (_ROOT "${_DIR}/@PROJECT_ROOT_DIR@" ABSOLUTE) set (@PROJECT_NAME@_INCLUDE_DIRS "${_ROOT}/include") set (@PROJECT_NAME@_LIBRARY_DIRS "${_ROOT}/lib") set (@PROJECT_NAME@_BINARY_DIRS "${_ROOT}/bin") unset (_ROOT) unset (_DIR) include(CMakeFindDependencyMacro) @CONFIG_PUBLIC_DEPENDENCIES@ set (@PROJECT_NAME@_LIBRARIES @GEOTIFF_LIBRARY_TARGET@) if("@BUILD_SHARED_LIBS@") set (@PROJECT_NAME@_SHARED_LIBRARIES ${@PROJECT_NAME@_LIBRARIES}) else() set (@PROJECT_NAME@_STATIC_LIBRARIES ${@PROJECT_NAME@_LIBRARIES}) @CONFIG_PRIVATE_DEPENDENCIES@ endif() if(NOT @PROJECT_NAME@_FIND_QUIETLY) message (STATUS "Reading ${CMAKE_CURRENT_LIST_FILE}") # @PROJECT_NAME@_VERSION is set by version file message (STATUS "@PROJECT_NAME@ configuration, version ${@PROJECT_NAME@_VERSION}") message (STATUS " include directory: \${@PROJECT_NAME@_INCLUDE_DIRS}") if("@BUILD_SHARED_LIBS@") message (STATUS " \${@PROJECT_NAME@_LIBRARIES} set to shared library") else() message (STATUS " \${@PROJECT_NAME@_LIBRARIES} set to static libraries") endif() endif() # Read in the exported definition of the library include ("${CMAKE_CURRENT_LIST_DIR}/@PROJECT_NAME_LOWER@-depends.cmake") # For compatibility with FindGeoTIFF.cmake set (@PROJECT_NAME_UPPER@_FOUND 1) set (@PROJECT_NAME_UPPER@_LIBRARIES ${@PROJECT_NAME@_LIBRARIES}) set (@PROJECT_NAME_UPPER@_INCLUDE_DIR ${@PROJECT_NAME@_INCLUDE_DIRS}) set (@PROJECT_NAME_UPPER@_LIBRARY ${@PROJECT_NAME@_LIBRARIES}) libgeotiff-1.7.4/cmake/project-config-version.cmake.in0000664000175000017500000000301514020740032017632 00000000000000# Version checking for @PROJECT_NAME@ set (PACKAGE_VERSION "@PROJECT_VERSION@") set (PACKAGE_VERSION_MAJOR "@PROJECT_VERSION_MAJOR@") set (PACKAGE_VERSION_MINOR "@PROJECT_VERSION_MINOR@") set (PACKAGE_VERSION_PATCH "@PROJECT_VERSION_PATCH@") if (NOT PACKAGE_FIND_NAME STREQUAL "@PROJECT_NAME@") # Check package name (in particular, because of the way cmake finds # package config files, the capitalization could easily be "wrong"). # This is necessary to ensure that the automatically generated # variables, e.g., _FOUND, are consistently spelled. Make # this a WARNING, because this is a user error that needs to be fixed. message (WARNING "Mismatched package names: use find_package(@PROJECT_NAME@ ...) instead" " of find_package(${PACKAGE_FIND_NAME} ...)") set (PACKAGE_VERSION_UNSUITABLE TRUE) elseif (NOT (APPLE OR CMAKE_SIZEOF_VOID_P EQUAL @CMAKE_SIZEOF_VOID_P@)) # Reject if there's a 32-bit/64-bit mismatch (may not be necessary # with Apple since a multi-architecture library might be built for # that platform). message (STATUS "${CMAKE_CURRENT_LIST_FILE} unsuitable because package built with " "sizeof(*void) = @CMAKE_SIZEOF_VOID_P@") set (PACKAGE_VERSION_UNSUITABLE TRUE) elseif (PACKAGE_FIND_VERSION) if (PACKAGE_FIND_VERSION VERSION_EQUAL PACKAGE_VERSION) set (PACKAGE_VERSION_EXACT TRUE) elseif (PACKAGE_FIND_VERSION VERSION_LESS PACKAGE_VERSION AND PACKAGE_FIND_VERSION_MAJOR EQUAL PACKAGE_VERSION_MAJOR) set (PACKAGE_VERSION_COMPATIBLE TRUE) endif () endif () libgeotiff-1.7.4/cmake/Makefile.am0000664000175000017500000000020614632634101013672 00000000000000EXTRA_DIST = FindPROJ.cmake \ geo_config.h.in \ project-config-version.cmake.in \ project-config.cmake.in \ CMakeLists.txt libgeotiff-1.7.4/cmake/Makefile.in0000664000175000017500000003252714755113347013730 00000000000000# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2018 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = cmake ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/m4/ax_prog_doxygen.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/geo_config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_DX_CURRENT_FEATURE = @DX_FLAG_DX_CURRENT_FEATURE@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ JPEG_INC = @JPEG_INC@ JPEG_PREFIX = @JPEG_PREFIX@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBGEOTIFF_MAJOR_VERSION = @LIBGEOTIFF_MAJOR_VERSION@ LIBGEOTIFF_MINOR_VERSION = @LIBGEOTIFF_MINOR_VERSION@ LIBGEOTIFF_PATCH_VERSION = @LIBGEOTIFF_PATCH_VERSION@ LIBGEOTIFF_REV_VERSION = @LIBGEOTIFF_REV_VERSION@ LIBGEOTIFF_STRING_VERSION = @LIBGEOTIFF_STRING_VERSION@ LIBGEOTIFF_VERSION = @LIBGEOTIFF_VERSION@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTIFF_CFLAGS = @LIBTIFF_CFLAGS@ LIBTIFF_LIBS = @LIBTIFF_LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ NOUNDEFINED = @NOUNDEFINED@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ PROJ_CFLAGS = @PROJ_CFLAGS@ PROJ_INCLUDE = @PROJ_INCLUDE@ PROJ_LIBS = @PROJ_LIBS@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ TIFF_INC = @TIFF_INC@ TIFF_PREFIX = @TIFF_PREFIX@ VERSION = @VERSION@ ZIP_INC = @ZIP_INC@ ZIP_PREFIX = @ZIP_PREFIX@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ EXTRA_DIST = FindPROJ.cmake \ geo_config.h.in \ project-config-version.cmake.in \ project-config.cmake.in \ CMakeLists.txt all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu cmake/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu cmake/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ cscopelist-am ctags-am distclean distclean-generic \ distclean-libtool distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am .PRECIOUS: Makefile # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: libgeotiff-1.7.4/aclocal.m40000664000175000017500000015126714755113347012446 00000000000000# generated automatically by aclocal 1.16.1 -*- Autoconf -*- # Copyright (C) 1996-2018 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, [m4_warning([this file was generated for autoconf 2.69. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically 'autoreconf'.])]) dnl pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- dnl serial 11 (pkg-config-0.29.1) dnl dnl Copyright © 2004 Scott James Remnant . dnl Copyright © 2012-2015 Dan Nicholson dnl dnl This program is free software; you can redistribute it and/or modify dnl it under the terms of the GNU General Public License as published by dnl the Free Software Foundation; either version 2 of the License, or dnl (at your option) any later version. dnl dnl This program is distributed in the hope that it will be useful, but dnl WITHOUT ANY WARRANTY; without even the implied warranty of dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU dnl General Public License for more details. dnl dnl You should have received a copy of the GNU General Public License dnl along with this program; if not, write to the Free Software dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA dnl 02111-1307, USA. dnl dnl As a special exception to the GNU General Public License, if you dnl distribute this file as part of a program that contains a dnl configuration script generated by Autoconf, you may include it under dnl the same distribution terms that you use for the rest of that dnl program. dnl PKG_PREREQ(MIN-VERSION) dnl ----------------------- dnl Since: 0.29 dnl dnl Verify that the version of the pkg-config macros are at least dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's dnl installed version of pkg-config, this checks the developer's version dnl of pkg.m4 when generating configure. dnl dnl To ensure that this macro is defined, also add: dnl m4_ifndef([PKG_PREREQ], dnl [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])]) dnl dnl See the "Since" comment for each macro you use to see what version dnl of the macros you require. m4_defun([PKG_PREREQ], [m4_define([PKG_MACROS_VERSION], [0.29.1]) m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1, [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])]) ])dnl PKG_PREREQ dnl PKG_PROG_PKG_CONFIG([MIN-VERSION]) dnl ---------------------------------- dnl Since: 0.16 dnl dnl Search for the pkg-config tool and set the PKG_CONFIG variable to dnl first found in the path. Checks that the version of pkg-config found dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is dnl used since that's the first version where most current features of dnl pkg-config existed. AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) fi if test -n "$PKG_CONFIG"; then _pkg_min_version=m4_default([$1], [0.9.0]) AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) PKG_CONFIG="" fi fi[]dnl ])dnl PKG_PROG_PKG_CONFIG dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) dnl ------------------------------------------------------------------- dnl Since: 0.18 dnl dnl Check to see whether a particular set of modules exists. Similar to dnl PKG_CHECK_MODULES(), but does not set variables or print errors. dnl dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) dnl only at the first occurence in configure.ac, so if the first place dnl it's called might be skipped (such as if it is within an "if", you dnl have to call PKG_CHECK_EXISTS manually AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl if test -n "$PKG_CONFIG" && \ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then m4_default([$2], [:]) m4_ifvaln([$3], [else $3])dnl fi]) dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) dnl --------------------------------------------- dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting dnl pkg_failed based on the result. m4_define([_PKG_CONFIG], [if test -n "$$1"; then pkg_cv_[]$1="$$1" elif test -n "$PKG_CONFIG"; then PKG_CHECK_EXISTS([$3], [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes ], [pkg_failed=yes]) else pkg_failed=untried fi[]dnl ])dnl _PKG_CONFIG dnl _PKG_SHORT_ERRORS_SUPPORTED dnl --------------------------- dnl Internal check to see if pkg-config supports short errors. AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi[]dnl ])dnl _PKG_SHORT_ERRORS_SUPPORTED dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], dnl [ACTION-IF-NOT-FOUND]) dnl -------------------------------------------------------------- dnl Since: 0.4.0 dnl dnl Note that if there is a possibility the first call to dnl PKG_CHECK_MODULES might not happen, you should be sure to include an dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl pkg_failed=no AC_MSG_CHECKING([for $1]) _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) _PKG_CONFIG([$1][_LIBS], [libs], [$2]) m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS and $1[]_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.]) if test $pkg_failed = yes; then AC_MSG_RESULT([no]) _PKG_SHORT_ERRORS_SUPPORTED if test $_pkg_short_errors_supported = yes; then $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` else $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD m4_default([$4], [AC_MSG_ERROR( [Package requirements ($2) were not met: $$1_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. _PKG_TEXT])[]dnl ]) elif test $pkg_failed = untried; then AC_MSG_RESULT([no]) m4_default([$4], [AC_MSG_FAILURE( [The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. _PKG_TEXT To get pkg-config, see .])[]dnl ]) else $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS $1[]_LIBS=$pkg_cv_[]$1[]_LIBS AC_MSG_RESULT([yes]) $3 fi[]dnl ])dnl PKG_CHECK_MODULES dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], dnl [ACTION-IF-NOT-FOUND]) dnl --------------------------------------------------------------------- dnl Since: 0.29 dnl dnl Checks for existence of MODULES and gathers its build flags with dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags dnl and VARIABLE-PREFIX_LIBS from --libs. dnl dnl Note that if there is a possibility the first call to dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to dnl include an explicit call to PKG_PROG_PKG_CONFIG in your dnl configure.ac. AC_DEFUN([PKG_CHECK_MODULES_STATIC], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl _save_PKG_CONFIG=$PKG_CONFIG PKG_CONFIG="$PKG_CONFIG --static" PKG_CHECK_MODULES($@) PKG_CONFIG=$_save_PKG_CONFIG[]dnl ])dnl PKG_CHECK_MODULES_STATIC dnl PKG_INSTALLDIR([DIRECTORY]) dnl ------------------------- dnl Since: 0.27 dnl dnl Substitutes the variable pkgconfigdir as the location where a module dnl should install pkg-config .pc files. By default the directory is dnl $libdir/pkgconfig, but the default can be changed by passing dnl DIRECTORY. The user can override through the --with-pkgconfigdir dnl parameter. AC_DEFUN([PKG_INSTALLDIR], [m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])]) m4_pushdef([pkg_description], [pkg-config installation directory @<:@]pkg_default[@:>@]) AC_ARG_WITH([pkgconfigdir], [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],, [with_pkgconfigdir=]pkg_default) AC_SUBST([pkgconfigdir], [$with_pkgconfigdir]) m4_popdef([pkg_default]) m4_popdef([pkg_description]) ])dnl PKG_INSTALLDIR dnl PKG_NOARCH_INSTALLDIR([DIRECTORY]) dnl -------------------------------- dnl Since: 0.27 dnl dnl Substitutes the variable noarch_pkgconfigdir as the location where a dnl module should install arch-independent pkg-config .pc files. By dnl default the directory is $datadir/pkgconfig, but the default can be dnl changed by passing DIRECTORY. The user can override through the dnl --with-noarch-pkgconfigdir parameter. AC_DEFUN([PKG_NOARCH_INSTALLDIR], [m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])]) m4_pushdef([pkg_description], [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@]) AC_ARG_WITH([noarch-pkgconfigdir], [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],, [with_noarch_pkgconfigdir=]pkg_default) AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir]) m4_popdef([pkg_default]) m4_popdef([pkg_description]) ])dnl PKG_NOARCH_INSTALLDIR dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE, dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) dnl ------------------------------------------- dnl Since: 0.28 dnl dnl Retrieves the value of the pkg-config variable for the given module. AC_DEFUN([PKG_CHECK_VAR], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl _PKG_CONFIG([$1], [variable="][$3]["], [$2]) AS_VAR_COPY([$1], [pkg_cv_][$1]) AS_VAR_IF([$1], [""], [$5], [$4])dnl ])dnl PKG_CHECK_VAR # Copyright (C) 2002-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.16' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.16.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.16.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to # '$srcdir', '$srcdir/..', or '$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is '.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl # Expand $ac_aux_dir to an absolute path. am_aux_dir=`cd "$ac_aux_dir" && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ([2.52])dnl m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], [$1], [CXX], [depcc="$CXX" am_compiler_list=], [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], [$1], [UPC], [depcc="$UPC" am_compiler_list=], [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi am__universal=false m4_case([$1], [CC], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac], [CXX], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac]) for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES. AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE([dependency-tracking], [dnl AS_HELP_STRING( [--enable-dependency-tracking], [do not reject slow dependency extractors]) AS_HELP_STRING( [--disable-dependency-tracking], [speeds up one-time build])]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl AC_SUBST([am__nodep])dnl _AM_SUBST_NOTMAKE([am__nodep])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. # TODO: see whether this extra hack can be removed once we start # requiring Autoconf 2.70 or later. AS_CASE([$CONFIG_FILES], [*\'*], [eval set x "$CONFIG_FILES"], [*], [set x $CONFIG_FILES]) shift # Used to flag and report bootstrapping failures. am_rc=0 for am_mf do # Strip MF so we end up with the name of the file. am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile which includes # dependency-tracking related rules and includes. # Grep'ing the whole file directly is not great: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ || continue am_dirpart=`AS_DIRNAME(["$am_mf"])` am_filepart=`AS_BASENAME(["$am_mf"])` AM_RUN_LOG([cd "$am_dirpart" \ && sed -e '/# am--include-marker/d' "$am_filepart" \ | $MAKE -f - am--depfiles]) || am_rc=$? done if test $am_rc -ne 0; then AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments for automatic dependency tracking. Try re-running configure with the '--disable-dependency-tracking' option to at least be able to build the package (albeit without support for automatic dependency tracking).]) fi AS_UNSET([am_dirpart]) AS_UNSET([am_filepart]) AS_UNSET([am_mf]) AS_UNSET([am_rc]) rm -f conftest-deps.mk } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking is enabled. # This creates each '.Po' and '.Plo' makefile fragment that we'll need in # order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC]) [_AM_PROG_CC_C_O ]) # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.65])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [AC_DIAGNOSE([obsolete], [$0: two- and three-arguments forms are deprecated.]) m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if( m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), [ok:ok],, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) AM_MISSING_PROG([AUTOCONF], [autoconf]) AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) AM_MISSING_PROG([AUTOHEADER], [autoheader]) AM_MISSING_PROG([MAKEINFO], [makeinfo]) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # AC_SUBST([mkdir_p], ['$(MKDIR_P)']) # We need awk for the "check" target (and possibly the TAP driver). The # system "awk" is bad on some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES([CC])], [m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES([CXX])], [m4_define([AC_PROG_CXX], m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES([OBJC])], [m4_define([AC_PROG_OBJC], m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], [_AM_DEPENDENCIES([OBJCXX])], [m4_define([AC_PROG_OBJCXX], m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl ]) AC_REQUIRE([AM_SILENT_RULES])dnl dnl The testsuite driver may need to know about EXEEXT, so add the dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl # POSIX will say in a future version that running "rm -f" with no argument # is OK; and we want to be able to make that assumption in our Makefile # recipes. So use an aggressive probe to check that the usage we want is # actually supported "in the wild" to an acceptable degree. # See automake bug#10828. # To make any issue more visible, cause the running configure to be aborted # by default if the 'rm' program in use doesn't match our expectations; the # user can still override this though. if rm -f && rm -fr && rm -rf; then : OK; else cat >&2 <<'END' Oops! Your 'rm' program seems unable to run without file operands specified on the command line, even when the '-f' option is present. This is contrary to the behaviour of most rm programs out there, and not conforming with the upcoming POSIX standard: Please tell bug-automake@gnu.org about your system, including the value of your $PATH and any error possibly output before this message. This can help us improve future automake versions. END if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then echo 'Configuration will proceed anyway, since you have set the' >&2 echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 echo >&2 else cat >&2 <<'END' Aborting the configuration process, to ensure you take notice of the issue. You can download and install GNU coreutils to get an 'rm' implementation that behaves properly: . If you want to complete the configuration process using your problematic 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM to "yes", and re-run configure. END AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) fi fi dnl The trailing newline in this macro's definition is deliberate, for dnl backward compatibility and to allow trailing 'dnl'-style comments dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. ]) dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi AC_SUBST([install_sh])]) # Copyright (C) 2003-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- # From Jim Meyering # Copyright (C) 1996-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MAINTAINER_MODE([DEFAULT-MODE]) # ---------------------------------- # Control maintainer-specific portions of Makefiles. # Default is to disable them, unless 'enable' is passed literally. # For symmetry, 'disable' may be passed as well. Anyway, the user # can override the default with the --enable/--disable switch. AC_DEFUN([AM_MAINTAINER_MODE], [m4_case(m4_default([$1], [disable]), [enable], [m4_define([am_maintainer_other], [disable])], [disable], [m4_define([am_maintainer_other], [enable])], [m4_define([am_maintainer_other], [enable]) m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) dnl maintainer-mode's default is 'disable' unless 'enable' is passed AC_ARG_ENABLE([maintainer-mode], [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], am_maintainer_other[ make rules and dependencies not useful (and sometimes confusing) to the casual installer])], [USE_MAINTAINER_MODE=$enableval], [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) AC_MSG_RESULT([$USE_MAINTAINER_MODE]) AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) MAINT=$MAINTAINER_MODE_TRUE AC_SUBST([MAINT])dnl ] ) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MAKE_INCLUDE() # ----------------- # Check whether make has an 'include' directive that can support all # the idioms we need for our automatic dependency tracking code. AC_DEFUN([AM_MAKE_INCLUDE], [AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive]) cat > confinc.mk << 'END' am__doit: @echo this is the am__doit target >confinc.out .PHONY: am__doit END am__include="#" am__quote= # BSD make does it like this. echo '.include "confinc.mk" # ignored' > confmf.BSD # Other make implementations (GNU, Solaris 10, AIX) do it like this. echo 'include confinc.mk # ignored' > confmf.GNU _am_result=no for s in GNU BSD; do AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out]) AS_CASE([$?:`cat confinc.out 2>/dev/null`], ['0:this is the am__doit target'], [AS_CASE([$s], [BSD], [am__include='.include' am__quote='"'], [am__include='include' am__quote=''])]) if test "$am__include" != "#"; then _am_result="yes ($s style)" break fi done rm -f confinc.* confmf.* AC_MSG_RESULT([${_am_result}]) AC_SUBST([am__include])]) AC_SUBST([am__quote])]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it is modern enough. # If it is, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= AC_MSG_WARN(['missing' script is too old or missing]) fi ]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # -------------------- # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), [1])]) # _AM_SET_OPTIONS(OPTIONS) # ------------------------ # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Copyright (C) 1999-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_CC_C_O # --------------- # Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC # to automatically call this. AC_DEFUN([_AM_PROG_CC_C_O], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([compile])dnl AC_LANG_PUSH([C])dnl AC_CACHE_CHECK( [whether $CC understands -c and -o together], [am_cv_prog_cc_c_o], [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) # Make sure it works both with $CC and with simple cc. # Following AC_PROG_CC_C_O, we do the test twice because some # compilers refuse to overwrite an existing .o file with -o, # though they will create one. am_cv_prog_cc_c_o=yes for am_i in 1 2; do if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ && test -f conftest2.$ac_objext; then : OK else am_cv_prog_cc_c_o=no break fi done rm -f core conftest* unset am_i]) if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi AC_LANG_POP([C])]) # For backward compatibility. AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) # Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_RUN_LOG(COMMAND) # ------------------- # Run COMMAND, save the exit status in ac_status, and log it. # (This has been adapted from Autoconf's _AC_RUN_LOG macro.) AC_DEFUN([AM_RUN_LOG], [{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD (exit $ac_status); }]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[[\\\"\#\$\&\'\`$am_lf]]*) AC_MSG_ERROR([unsafe absolute working directory name]);; esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi if test "$[2]" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT([yes]) # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi AC_CONFIG_COMMANDS_PRE( [AC_MSG_CHECKING([that generated files are newer than configure]) if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi AC_MSG_RESULT([done])]) rm -f conftest.file ]) # Copyright (C) 2009-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SILENT_RULES([DEFAULT]) # -------------------------- # Enable less verbose build rules; with the default set to DEFAULT # ("yes" being less verbose, "no" or empty being verbose). AC_DEFUN([AM_SILENT_RULES], [AC_ARG_ENABLE([silent-rules], [dnl AS_HELP_STRING( [--enable-silent-rules], [less verbose build output (undo: "make V=1")]) AS_HELP_STRING( [--disable-silent-rules], [verbose build output (undo: "make V=0")])dnl ]) case $enable_silent_rules in @%:@ ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; esac dnl dnl A few 'make' implementations (e.g., NonStop OS and NextStep) dnl do not support nested variable expansions. dnl See automake bug#9928 and bug#10237. am_make=${MAKE-make} AC_CACHE_CHECK([whether $am_make supports nested variables], [am_cv_make_support_nested_variables], [if AS_ECHO([['TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi]) if test $am_cv_make_support_nested_variables = yes; then dnl Using '$V' instead of '$(V)' breaks IRIX make. AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AC_SUBST([AM_V])dnl AM_SUBST_NOTMAKE([AM_V])dnl AC_SUBST([AM_DEFAULT_V])dnl AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl AC_SUBST([AM_DEFAULT_VERBOSITY])dnl AM_BACKSLASH='\' AC_SUBST([AM_BACKSLASH])dnl _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl ]) # Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor 'install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in "make install-strip", and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # AM_SUBST_NOTMAKE(VARIABLE) # -------------------------- # Public sister of _AM_SUBST_NOTMAKE. AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of 'v7', 'ustar', or 'pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar # AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AC_SUBST([AMTAR], ['$${TAR-tar}']) # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' m4_if([$1], [v7], [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], [m4_case([$1], [ustar], [# The POSIX 1988 'ustar' format is defined with fixed-size fields. # There is notably a 21 bits limit for the UID and the GID. In fact, # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 # and bug#13588). am_max_uid=2097151 # 2^21 - 1 am_max_gid=$am_max_uid # The $UID and $GID variables are not portable, so we need to resort # to the POSIX-mandated id(1) utility. Errors in the 'id' calls # below are definitely unexpected, so allow the users to see them # (that is, avoid stderr redirection). am_uid=`id -u || echo unknown` am_gid=`id -g || echo unknown` AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) if test $am_uid -le $am_max_uid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) if test $am_gid -le $am_max_gid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi], [pax], [], [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Go ahead even if we have the value already cached. We do so because we # need to set the values for the 'am__tar' and 'am__untar' variables. _am_tools=${am_cv_prog_tar_$1-$_am_tools} for _am_tool in $_am_tools; do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works. rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR m4_include([m4/libtool.m4]) m4_include([m4/ltoptions.m4]) m4_include([m4/ltsugar.m4]) m4_include([m4/ltversion.m4]) m4_include([m4/lt~obsolete.m4]) libgeotiff-1.7.4/config.sub0000755000175000017500000010645014020740157012547 00000000000000#! /bin/sh # Configuration validation subroutine script. # Copyright 1992-2018 Free Software Foundation, Inc. timestamp='2018-02-22' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, see . # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that # program. This Exception is an additional permission under section 7 # of the GNU General Public License, version 3 ("GPLv3"). # Please send patches to . # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # You can get the latest version of this script from: # https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS Canonicalize a configuration name. Options: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright 1992-2018 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" exit 1 ;; *local*) # First pass through any local machine types. echo "$1" exit ;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \ kopensolaris*-gnu* | cloudabi*-eabi* | \ storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; android-linux) os=-linux-android basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown ;; *) basic_machine=`echo "$1" | sed 's/-[^-]*$//'` if [ "$basic_machine" != "$1" ] then os=`echo "$1" | sed 's/.*-/-/'` else os=; fi ;; esac ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -apple | -axis | -knuth | -cray | -microblaze*) os= basic_machine=$1 ;; -bluegene*) os=-cnk ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 ;; -scout) ;; -wrs) os=-vxworks basic_machine=$1 ;; -chorusos*) os=-chorusos basic_machine=$1 ;; -chorusrdb) os=-chorusrdb basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco6) os=-sco5v6 basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -sco5) os=-sco3.2v5 basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -sco5v6*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -udk*) basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -lynx*178) os=-lynxos178 ;; -lynx*5) os=-lynxos5 ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo "$1" | sed -e 's/86-.*/86-sequent/'` ;; -psos*) os=-psos ;; -mint | -mint[0-9]*) basic_machine=m68k-atari os=-mint ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. 1750a | 580 \ | a29k \ | aarch64 | aarch64_be \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ | arc | arceb \ | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ | avr | avr32 \ | ba \ | be32 | be64 \ | bfin \ | c4x | c8051 | clipper \ | d10v | d30v | dlx | dsp16xx \ | e2k | epiphany \ | fido | fr30 | frv | ft32 \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | hexagon \ | i370 | i860 | i960 | ia16 | ia64 \ | ip2k | iq2000 \ | k1om \ | le32 | le64 \ | lm32 \ | m32c | m32r | m32rle | m68000 | m68k | m88k \ | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ | mips64octeon | mips64octeonel \ | mips64orion | mips64orionel \ | mips64r5900 | mips64r5900el \ | mips64vr | mips64vrel \ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ | mips64vr5900 | mips64vr5900el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa32r6 | mipsisa32r6el \ | mipsisa64 | mipsisa64el \ | mipsisa64r2 | mipsisa64r2el \ | mipsisa64r6 | mipsisa64r6el \ | mipsisa64sb1 | mipsisa64sb1el \ | mipsisa64sr71k | mipsisa64sr71kel \ | mipsr5900 | mipsr5900el \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ | moxie \ | mt \ | msp430 \ | nds32 | nds32le | nds32be \ | nios | nios2 | nios2eb | nios2el \ | ns16k | ns32k \ | open8 | or1k | or1knd | or32 \ | pdp10 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle \ | pru \ | pyramid \ | riscv32 | riscv64 \ | rl78 | rx \ | score \ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ | spu \ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ | ubicom32 \ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ | visium \ | wasm32 \ | x86 | xc16x | xstormy16 | xtensa \ | z8k | z80) basic_machine=$basic_machine-unknown ;; c54x) basic_machine=tic54x-unknown ;; c55x) basic_machine=tic55x-unknown ;; c6x) basic_machine=tic6x-unknown ;; leon|leon[3-9]) basic_machine=sparc-$basic_machine ;; m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip) basic_machine=$basic_machine-unknown os=-none ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65) ;; ms1) basic_machine=mt-unknown ;; strongarm | thumb | xscale) basic_machine=arm-unknown ;; xgate) basic_machine=$basic_machine-unknown os=-none ;; xscaleeb) basic_machine=armeb-unknown ;; xscaleel) basic_machine=armel-unknown ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. 580-* \ | a29k-* \ | aarch64-* | aarch64_be-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* | avr32-* \ | ba-* \ | be32-* | be64-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* \ | c8051-* | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | e2k-* | elxsi-* \ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | hexagon-* \ | i*86-* | i860-* | i960-* | ia16-* | ia64-* \ | ip2k-* | iq2000-* \ | k1om-* \ | le32-* | le64-* \ | lm32-* \ | m32c-* | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ | microblaze-* | microblazeel-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ | mips64octeon-* | mips64octeonel-* \ | mips64orion-* | mips64orionel-* \ | mips64r5900-* | mips64r5900el-* \ | mips64vr-* | mips64vrel-* \ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ | mips64vr5900-* | mips64vr5900el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa32r6-* | mipsisa32r6el-* \ | mipsisa64-* | mipsisa64el-* \ | mipsisa64r2-* | mipsisa64r2el-* \ | mipsisa64r6-* | mipsisa64r6el-* \ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipsr5900-* | mipsr5900el-* \ | mipstx39-* | mipstx39el-* \ | mmix-* \ | mt-* \ | msp430-* \ | nds32-* | nds32le-* | nds32be-* \ | nios-* | nios2-* | nios2eb-* | nios2el-* \ | none-* | np1-* | ns16k-* | ns32k-* \ | open8-* \ | or1k*-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ | pru-* \ | pyramid-* \ | riscv32-* | riscv64-* \ | rl78-* | romp-* | rs6000-* | rx-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \ | tahoe-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tile*-* \ | tron-* \ | ubicom32-* \ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ | vax-* \ | visium-* \ | wasm32-* \ | we32k-* \ | x86-* | x86_64-* | xc16x-* | xps100-* \ | xstormy16-* | xtensa*-* \ | ymp-* \ | z8k-* | z80-*) ;; # Recognize the basic CPU types without company name, with glob match. xtensa*) basic_machine=$basic_machine-unknown ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) basic_machine=i386-pc os=-bsd ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; a29khif) basic_machine=a29k-amd os=-udi ;; abacus) basic_machine=abacus-unknown ;; adobe68k) basic_machine=m68010-adobe os=-scout ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amd64) basic_machine=x86_64-pc ;; amd64-*) basic_machine=x86_64-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-unknown ;; amigaos | amigados) basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) basic_machine=m68k-unknown os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; apollo68bsd) basic_machine=m68k-apollo os=-bsd ;; aros) basic_machine=i386-pc os=-aros ;; asmjs) basic_machine=asmjs-unknown ;; aux) basic_machine=m68k-apple os=-aux ;; balance) basic_machine=ns32k-sequent os=-dynix ;; blackfin) basic_machine=bfin-unknown os=-linux ;; blackfin-*) basic_machine=bfin-`echo "$basic_machine" | sed 's/^[^-]*-//'` os=-linux ;; bluegene*) basic_machine=powerpc-ibm os=-cnk ;; c54x-*) basic_machine=tic54x-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; c55x-*) basic_machine=tic55x-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; c6x-*) basic_machine=tic6x-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; c90) basic_machine=c90-cray os=-unicos ;; cegcc) basic_machine=arm-unknown os=-cegcc ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | j90) basic_machine=j90-cray os=-unicos ;; craynv) basic_machine=craynv-cray os=-unicosmp ;; cr16 | cr16-*) basic_machine=cr16-unknown os=-elf ;; crds | unos) basic_machine=m68k-crds ;; crisv32 | crisv32-* | etraxfs*) basic_machine=crisv32-axis ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; crx) basic_machine=crx-unknown os=-elf ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; decsystem10* | dec10*) basic_machine=pdp10-dec os=-tops10 ;; decsystem20* | dec20*) basic_machine=pdp10-dec os=-tops20 ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; dicos) basic_machine=i686-pc os=-dicos ;; djgpp) basic_machine=i586-pc os=-msdosdjgpp ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2*) basic_machine=m68k-bull os=-sysv3 ;; e500v[12]) basic_machine=powerpc-unknown os=$os"spe" ;; e500v[12]-*) basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'` os=$os"spe" ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson os=-ose ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; go32) basic_machine=i386-pc os=-go32 ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; h8300xray) basic_machine=h8300-hitachi os=-xray ;; h8500hms) basic_machine=h8500-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) basic_machine=hppa1.1-hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; hppaosf) basic_machine=hppa1.1-hp os=-osf ;; hppro) basic_machine=hppa1.1-hp os=-proelf ;; i370-ibm* | ibm*) basic_machine=i370-ibm ;; i*86v32) basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i*86v4*) basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i*86v) basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` os=-sysv ;; i*86sol2) basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; i386mach) basic_machine=i386-mach os=-mach ;; vsta) basic_machine=i386-unknown os=-vsta ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; leon-*|leon[3-9]-*) basic_machine=sparc-`echo "$basic_machine" | sed 's/-.*//'` ;; m68knommu) basic_machine=m68k-unknown os=-linux ;; m68knommu-*) basic_machine=m68k-`echo "$basic_machine" | sed 's/^[^-]*-//'` os=-linux ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; microblaze*) basic_machine=microblaze-xilinx ;; mingw64) basic_machine=x86_64-pc os=-mingw64 ;; mingw32) basic_machine=i686-pc os=-mingw32 ;; mingw32ce) basic_machine=arm-unknown os=-mingw32ce ;; miniframe) basic_machine=m68000-convergent ;; *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) basic_machine=m68k-atari os=-mint ;; mips3*-*) basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`-unknown ;; monitor) basic_machine=m68k-rom68k os=-coff ;; morphos) basic_machine=powerpc-unknown os=-morphos ;; moxiebox) basic_machine=moxie-unknown os=-moxiebox ;; msdos) basic_machine=i386-pc os=-msdos ;; ms1-*) basic_machine=`echo "$basic_machine" | sed -e 's/ms1-/mt-/'` ;; msys) basic_machine=i686-pc os=-msys ;; mvs) basic_machine=i370-ibm os=-mvs ;; nacl) basic_machine=le32-unknown os=-nacl ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; netbsd386) basic_machine=i386-unknown os=-netbsd ;; netwinder) basic_machine=armv4l-rebel os=-linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; necv70) basic_machine=v70-nec os=-sysv ;; next | m*-next) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; mon960) basic_machine=i960-intel os=-mon960 ;; nonstopux) basic_machine=mips-compaq os=-nonstopux ;; np1) basic_machine=np1-gould ;; neo-tandem) basic_machine=neo-tandem ;; nse-tandem) basic_machine=nse-tandem ;; nsr-tandem) basic_machine=nsr-tandem ;; nsv-tandem) basic_machine=nsv-tandem ;; nsx-tandem) basic_machine=nsx-tandem ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf ;; openrisc | openrisc-*) basic_machine=or32-unknown ;; os400) basic_machine=powerpc-ibm os=-os400 ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose ;; os68k) basic_machine=m68k-none os=-os68k ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; parisc) basic_machine=hppa-unknown os=-linux ;; parisc-*) basic_machine=hppa-`echo "$basic_machine" | sed 's/^[^-]*-//'` os=-linux ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pc98) basic_machine=i386-pc ;; pc98-*) basic_machine=i386-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; pentiumpro | p6 | 6x86 | athlon | athlon_*) basic_machine=i686-pc ;; pentiumii | pentium2 | pentiumiii | pentium3) basic_machine=i686-pc ;; pentium4) basic_machine=i786-pc ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; pentium4-*) basic_machine=i786-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc | ppcbe) basic_machine=powerpc-unknown ;; ppc-* | ppcbe-*) basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown ;; ppc64-*) basic_machine=powerpc64-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; pw32) basic_machine=i586-unknown os=-pw32 ;; rdos | rdos64) basic_machine=x86_64-pc os=-rdos ;; rdos32) basic_machine=i386-pc os=-rdos ;; rom68k) basic_machine=m68k-rom68k os=-coff ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; s390 | s390-*) basic_machine=s390-ibm ;; s390x | s390x-*) basic_machine=s390x-ibm ;; sa29200) basic_machine=a29k-amd os=-udi ;; sb1) basic_machine=mipsisa64sb1-unknown ;; sb1el) basic_machine=mipsisa64sb1el-unknown ;; sde) basic_machine=mipsisa32-sde os=-elf ;; sei) basic_machine=mips-sei os=-seiux ;; sequent) basic_machine=i386-sequent ;; sh5el) basic_machine=sh5le-unknown ;; simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; st2000) basic_machine=m68k-tandem ;; stratus) basic_machine=i860-stratus os=-sysv4 ;; strongarm-* | thumb-*) basic_machine=arm-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; sv1) basic_machine=sv1-cray os=-unicos ;; symmetry) basic_machine=i386-sequent os=-dynix ;; t3e) basic_machine=alphaev5-cray os=-unicos ;; t90) basic_machine=t90-cray os=-unicos ;; tile*) basic_machine=$basic_machine-unknown os=-linux-gnu ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; toad1) basic_machine=pdp10-xkl os=-tops20 ;; tower | tower-32) basic_machine=m68k-ncr ;; tpf) basic_machine=s390x-ibm os=-tpf ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; v810 | necv810) basic_machine=v810-nec os=-none ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vpp*|vx|vx-*) basic_machine=f301-fujitsu ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; w65*) basic_machine=w65-wdc os=-none ;; w89k-*) basic_machine=hppa1.1-winbond os=-proelf ;; x64) basic_machine=x86_64-pc ;; xbox) basic_machine=i686-pc os=-mingw32 ;; xps | xps100) basic_machine=xps100-honeywell ;; xscale-* | xscalee[bl]-*) basic_machine=`echo "$basic_machine" | sed 's/^xscale/arm/'` ;; ymp) basic_machine=ymp-cray os=-unicos ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) basic_machine=hppa1.1-winbond ;; op50n) basic_machine=hppa1.1-oki ;; op60c) basic_machine=hppa1.1-oki ;; romp) basic_machine=romp-ibm ;; mmix) basic_machine=mmix-knuth ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; mac | mpw | mac-mpw) basic_machine=m68k-apple ;; pmac | pmac-mpw) basic_machine=powerpc-apple ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; *) echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo "$basic_machine" | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo "$basic_machine" | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # First match some system type aliases that might get confused # with valid system types. # -solaris* is a basic system type, with this one exception. -auroraux) os=-auroraux ;; -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; # es1800 is here to avoid being matched by es* (a different OS) -es1800*) os=-ose ;; # Now accept the basic system types. # The portable systems comes first. # Each alternative MUST end in a * to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ | -sym* | -kopensolaris* | -plan9* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* | -aros* | -cloudabi* | -sortix* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -knetbsd* | -mirbsd* | -netbsd* \ | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* | -cegcc* | -glidix* \ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ | -linux-newlib* | -linux-musl* | -linux-uclibc* \ | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \ | -onefs* | -tirtos* | -phoenix* | -fuchsia* | -redox* | -bme* \ | -midnightbsd*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) case $basic_machine in x86-* | i*86-*) ;; *) os=-nto$os ;; esac ;; -nto-qnx*) ;; -nto*) os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -xray | -os68k* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo "$os" | sed -e 's|mac|macos|'` ;; -linux-dietlibc) os=-linux-dietlibc ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) os=`echo "$os" | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo "$os" | sed -e 's|sunos6|solaris3|'` ;; -opened*) os=-openedition ;; -os400*) os=-os400 ;; -wince*) os=-wince ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -atheos*) os=-atheos ;; -syllable*) os=-syllable ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; -nova*) os=-rtmk-nova ;; -ns2) os=-nextstep2 ;; -nsk*) os=-nsk ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -tpf*) os=-tpf ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4*) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -ose*) os=-ose ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; -zvmoe) os=-zvmoe ;; -dicos*) os=-dicos ;; -pikeos*) # Until real need of OS specific support for # particular features comes up, bare metal # configurations are quite functional. case $basic_machine in arm*) os=-eabi ;; *) os=-elf ;; esac ;; -nacl*) ;; -ios) ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in score-*) os=-elf ;; spu-*) os=-elf ;; *-acorn) os=-riscix1.2 ;; arm*-rebel) os=-linux ;; arm*-semi) os=-aout ;; c4x-* | tic4x-*) os=-coff ;; c8051-*) os=-elf ;; hexagon-*) os=-elf ;; tic54x-*) os=-coff ;; tic55x-*) os=-coff ;; tic6x-*) os=-coff ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 ;; m68*-cisco) os=-aout ;; mep-*) os=-elf ;; mips*-cisco) os=-elf ;; mips*-*) os=-elf ;; or32-*) os=-coff ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; pru-*) os=-elf ;; *-be) os=-beos ;; *-ibm) os=-aix ;; *-knuth) os=-mmixware ;; *-wec) os=-proelf ;; *-winbond) os=-proelf ;; *-oki) os=-proelf ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigaos ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-next) os=-nextstep ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; *-rom68k) os=-coff ;; *-*bug) os=-coff ;; *-apple) os=-macos ;; *-atari*) os=-mint ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -cnk*|-aix*) vendor=ibm ;; -beos*) vendor=be ;; -hpux*) vendor=hp ;; -mpeix*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs* | -opened*) vendor=ibm ;; -os400*) vendor=ibm ;; -ptx*) vendor=sequent ;; -tpf*) vendor=ibm ;; -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; -aux*) vendor=apple ;; -hms*) vendor=hitachi ;; -mpw* | -macos*) vendor=apple ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; -vos*) vendor=stratus ;; esac basic_machine=`echo "$basic_machine" | sed "s/unknown/$vendor/"` ;; esac echo "$basic_machine$os" exit # Local variables: # eval: (add-hook 'write-file-functions 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: libgeotiff-1.7.4/geokeys.inc0000664000175000017500000001043114622755317012734 00000000000000/* GeoTIFF GeoKey Database */ /* Note: Any changes/additions to this database require */ /* a change in the revision value in geokeys.h */ /* C database for Geotiff include files. */ /* the macro ValuePair() must be defined */ /* by the enclosing include file */ /* 6.2.1 GeoTIFF Configuration Keys */ ValuePair( GTModelTypeGeoKey, 1024) /* Section 6.3.1.1 Codes */ ValuePair( GTRasterTypeGeoKey, 1025) /* Section 6.3.1.2 Codes */ ValuePair( GTCitationGeoKey, 1026) /* documentation */ /* 6.2.2 Geographic CS Parameter Keys */ ValuePair( GeographicTypeGeoKey, 2048) /* Section 6.3.2.1 Codes */ ValuePair( GeogCitationGeoKey, 2049) /* documentation */ ValuePair( GeogGeodeticDatumGeoKey, 2050) /* Section 6.3.2.2 Codes */ ValuePair( GeogPrimeMeridianGeoKey, 2051) /* Section 6.3.2.4 codes */ ValuePair( GeogLinearUnitsGeoKey, 2052) /* Section 6.3.1.3 Codes */ ValuePair( GeogLinearUnitSizeGeoKey, 2053) /* meters */ ValuePair( GeogAngularUnitsGeoKey, 2054) /* Section 6.3.1.4 Codes */ ValuePair( GeogAngularUnitSizeGeoKey, 2055) /* radians */ ValuePair( GeogEllipsoidGeoKey, 2056) /* Section 6.3.2.3 Codes */ ValuePair( GeogSemiMajorAxisGeoKey, 2057) /* GeogLinearUnits */ ValuePair( GeogSemiMinorAxisGeoKey, 2058) /* GeogLinearUnits */ ValuePair( GeogInvFlatteningGeoKey, 2059) /* ratio */ ValuePair( GeogAzimuthUnitsGeoKey, 2060) /* Section 6.3.1.4 Codes */ ValuePair( GeogPrimeMeridianLongGeoKey, 2061) /* GeoAngularUnit */ ValuePair( GeogTOWGS84GeoKey, 2062) /* 2011 - proposed addition */ /* 6.2.3 Projected CS Parameter Keys */ /* Several keys have been renamed,*/ /* and the deprecated names aliased for backward compatibility */ ValuePair( ProjectedCSTypeGeoKey, 3072) /* Section 6.3.3.1 codes */ ValuePair( PCSCitationGeoKey, 3073) /* documentation */ ValuePair( ProjectionGeoKey, 3074) /* Section 6.3.3.2 codes */ ValuePair( ProjCoordTransGeoKey, 3075) /* Section 6.3.3.3 codes */ ValuePair( ProjLinearUnitsGeoKey, 3076) /* Section 6.3.1.3 codes */ ValuePair( ProjLinearUnitSizeGeoKey, 3077) /* meters */ ValuePair( ProjStdParallel1GeoKey, 3078) /* GeogAngularUnit */ ValuePair( ProjStdParallelGeoKey,ProjStdParallel1GeoKey) /* ** alias ** */ ValuePair( ProjStdParallel2GeoKey, 3079) /* GeogAngularUnit */ ValuePair( ProjNatOriginLongGeoKey, 3080) /* GeogAngularUnit */ ValuePair( ProjOriginLongGeoKey,ProjNatOriginLongGeoKey) /* ** alias ** */ ValuePair( ProjNatOriginLatGeoKey, 3081) /* GeogAngularUnit */ ValuePair( ProjOriginLatGeoKey,ProjNatOriginLatGeoKey) /* ** alias ** */ ValuePair( ProjFalseEastingGeoKey, 3082) /* ProjLinearUnits */ ValuePair( ProjFalseNorthingGeoKey, 3083) /* ProjLinearUnits */ ValuePair( ProjFalseOriginLongGeoKey, 3084) /* GeogAngularUnit */ ValuePair( ProjFalseOriginLatGeoKey, 3085) /* GeogAngularUnit */ ValuePair( ProjFalseOriginEastingGeoKey, 3086) /* ProjLinearUnits */ ValuePair( ProjFalseOriginNorthingGeoKey, 3087) /* ProjLinearUnits */ ValuePair( ProjCenterLongGeoKey, 3088) /* GeogAngularUnit */ ValuePair( ProjCenterLatGeoKey, 3089) /* GeogAngularUnit */ ValuePair( ProjCenterEastingGeoKey, 3090) /* ProjLinearUnits */ ValuePair( ProjCenterNorthingGeoKey, 3091) /* ProjLinearUnits */ ValuePair( ProjScaleAtNatOriginGeoKey, 3092) /* ratio */ ValuePair( ProjScaleAtOriginGeoKey,ProjScaleAtNatOriginGeoKey) /* ** alias ** */ ValuePair( ProjScaleAtCenterGeoKey, 3093) /* ratio */ ValuePair( ProjAzimuthAngleGeoKey, 3094) /* GeogAzimuthUnit */ ValuePair( ProjStraightVertPoleLongGeoKey, 3095) /* GeogAngularUnit */ ValuePair( ProjRectifiedGridAngleGeoKey, 3096) /* GeogAngularUnit */ /* 6.2.4 Vertical CS Keys */ ValuePair( VerticalCSTypeGeoKey, 4096) /* Section 6.3.4.1 codes */ ValuePair( VerticalCitationGeoKey, 4097) /* documentation */ ValuePair( VerticalDatumGeoKey, 4098) /* Section 6.3.4.2 codes */ ValuePair( VerticalUnitsGeoKey, 4099) /* Section 6.3.1 (.x) codes */ /* See https://github.com/opengeospatial/geotiff/pull/99 */ ValuePair( CoordinateEpochGeoKey, 5120) /* GeoKey of type double */ /* End of Data base */ libgeotiff-1.7.4/geokeys.h0000664000175000017500000000327414020740032012375 00000000000000/********************************************************************** * * geokeys.h - Public registry for valid GEOTIFF GeoKeys. * * Written By: Niles D. Ritter * * copyright (c) 1995 Niles D. Ritter * * Permission granted to use this software, so long as this copyright * notice accompanies any products derived therefrom. **********************************************************************/ #ifndef LIBGEOTIFF_GEOKEYS_H_ #define LIBGEOTIFF_GEOKEYS_H_ /* The GvCurrentRevision number should be incremented whenever a * new set of Keys are defined or modified in "geokeys.inc", and comments * added to the "Revision History" section above. If only code * _values_ are augmented, the "GvCurrentMinorRev" number should * be incremented instead (see "geovalues.h"). Whenever the * GvCurrentRevision is incremented, the GvCurrentMinorRev should * be reset to zero. * * * The Section Numbers below refer to the GeoTIFF Spec sections * in which these values are documented. * */ #define GvCurrentRevision 1 /* Final 1.0 Release */ #ifdef ValuePair # undef ValuePair #endif #define ValuePair(name,value) name = value, typedef enum { BaseGeoKey = 1024, /* First valid code */ # include "geokeys.inc" /* geokey database */ #define ONLY_GEOTIFF_V1_1_CHANGES # include "geokeys_v1_1.inc" /* geokey database */ #undef ONLY_GEOTIFF_V1_1_CHANGES ReservedEndGeoKey = 32767, /* Key space available for Private or internal use */ PrivateBaseGeoKey = 32768, /* Consistent with TIFF Private tags */ PrivateEndGeoKey = 65535, EndGeoKey = 65535 /* Largest Possible GeoKey ID */ } geokey_t; #endif /* LIBGEOTIFF_GEOKEYS_H_ */ libgeotiff-1.7.4/bin/0000775000175000017500000000000014755113373011421 500000000000000libgeotiff-1.7.4/bin/makegeo.c0000664000175000017500000000512214622755317013120 00000000000000/* * makegeo.c -- example client code for LIBGEO geographic * TIFF tag support. * * Author: Niles D. Ritter * * Revision History: * 31 October, 1995 Fixed reversed lat-long coordinates NDR * */ #include "geotiffio.h" #include "xtiffio.h" #include #include void SetUpTIFFDirectory(TIFF *tif); void SetUpGeoKeys(GTIF *gtif); void WriteImage(TIFF *tif); #define WIDTH 20L #define HEIGHT 20L int main() { const char *fname = "newgeo.tif"; TIFF *tif=XTIFFOpen(fname,"w"); /* TIFF-level descriptor */ if (!tif) { printf("failure in makegeo\n"); return -1; } GTIF *gtif = GTIFNew(tif); /* GeoKey-level descriptor */ if (!gtif) { printf("failure in makegeo\n"); printf("failed in GTIFNew\n"); TIFFClose(tif); return -1; } SetUpTIFFDirectory(tif); SetUpGeoKeys(gtif); WriteImage(tif); GTIFWriteKeys(gtif); GTIFFree(gtif); XTIFFClose(tif); return 0; } void SetUpTIFFDirectory(TIFF *tif) { TIFFSetField(tif,TIFFTAG_IMAGEWIDTH, WIDTH); TIFFSetField(tif,TIFFTAG_IMAGELENGTH, HEIGHT); TIFFSetField(tif,TIFFTAG_COMPRESSION, COMPRESSION_NONE); TIFFSetField(tif,TIFFTAG_PHOTOMETRIC, PHOTOMETRIC_MINISBLACK); TIFFSetField(tif,TIFFTAG_PLANARCONFIG, PLANARCONFIG_CONTIG); TIFFSetField(tif,TIFFTAG_BITSPERSAMPLE, 8); TIFFSetField(tif,TIFFTAG_ROWSPERSTRIP, 20L); const double tiepoints[6]={0,0,0,130.0,32.0,0.0}; const double pixscale[3]={1,1,0}; TIFFSetField(tif,TIFFTAG_GEOTIEPOINTS, 6,tiepoints); TIFFSetField(tif,TIFFTAG_GEOPIXELSCALE, 3,pixscale); } void SetUpGeoKeys(GTIF *gtif) { GTIFKeySet(gtif, GTModelTypeGeoKey, TYPE_SHORT, 1, ModelGeographic); GTIFKeySet(gtif, GTRasterTypeGeoKey, TYPE_SHORT, 1, RasterPixelIsArea); GTIFKeySet(gtif, GTCitationGeoKey, TYPE_ASCII, 0, "Just An Example"); GTIFKeySet(gtif, GeographicTypeGeoKey, TYPE_SHORT, 1, KvUserDefined); GTIFKeySet(gtif, GeogCitationGeoKey, TYPE_ASCII, 0, "Everest Ellipsoid Used."); GTIFKeySet(gtif, GeogAngularUnitsGeoKey, TYPE_SHORT, 1, Angular_Degree); GTIFKeySet(gtif, GeogLinearUnitsGeoKey, TYPE_SHORT, 1, Linear_Meter); GTIFKeySet(gtif, GeogGeodeticDatumGeoKey, TYPE_SHORT, 1, KvUserDefined); GTIFKeySet(gtif, GeogEllipsoidGeoKey, TYPE_SHORT, 1, Ellipse_Everest_1830_1967_Definition); GTIFKeySet(gtif, GeogSemiMajorAxisGeoKey, TYPE_DOUBLE, 1, (double)6377298.556); GTIFKeySet(gtif, GeogInvFlatteningGeoKey, TYPE_DOUBLE, 1, (double)300.8017); } void WriteImage(TIFF *tif) { char buffer[WIDTH]; memset(buffer,0,(size_t)WIDTH); for (int i=0;i #include /* * get option letter from argument vector */ int opterr = 1, /* if error message should be printed */ optind = 1, /* index into parent argv vector */ optopt; /* character checked for validity */ char *optarg; /* argument associated with option */ #define BADCH (int)'?' #define EMSG "" int getopt(int nargc, char** nargv, char* ostr) { static char *place = EMSG; /* option letter processing */ register char *oli; /* option letter list index */ char *p; if (!*place) { /* update scanning pointer */ if (optind >= nargc || *(place = nargv[optind]) != '-') { place = EMSG; return(EOF); } if (place[1] && *++place == '-') { /* found "--" */ ++optind; place = EMSG; return(EOF); } } /* option letter okay? */ if ((optopt = (int)*place++) == (int)':' || !(oli = strchr(ostr, optopt))) { /* * if the user didn't specify '-' as an option, * assume it means EOF. */ if (optopt == (int)'-') return(EOF); if (!*place) ++optind; if (opterr) { if (!(p = strrchr(*nargv, '/'))) p = *nargv; else ++p; (void)fprintf(stderr, "%s: illegal option -- %c\n", p, optopt); } return(BADCH); } if (*++oli != ':') { /* don't need argument */ optarg = NULL; if (!*place) ++optind; } else { /* need an argument */ if (*place) /* no white space */ optarg = place; else if (nargc <= ++optind) { /* no arg */ place = EMSG; if (!(p = strrchr(*nargv, '/'))) p = *nargv; else ++p; if (opterr) (void)fprintf(stderr, "%s: option requires an argument -- %c\n", p, optopt); return(BADCH); } else /* white space */ optarg = nargv[optind]; place = EMSG; ++optind; } return(optopt); /* dump back option letter */ } libgeotiff-1.7.4/bin/listgeo.c0000664000175000017500000002275614622755317013172 00000000000000/* * listgeo.c -- example client code for LIBGEO geographic * TIFF tag support. Dumps info to GeoTIFF metadata file. * * Author: Niles D. Ritter * */ #include "geotiff.h" #include "xtiffio.h" #include "geo_normalize.h" #include "geo_simpletags.h" #include "geovalues.h" #include "tiffio.h" #include "cpl_serv.h" #include static void WriteTFWFile( GTIF * gtif, const char * tif_filename ); static void GTIFPrintCorners( GTIF *, GTIFDefn *, FILE *, int, int, int, int ); static TIFF *st_setup_test_info(); void Usage() { printf( "%s", "Usage: listgeo [-d] [-tfw] [-proj4] [-no_norm] [-t tabledir] filename\n" "\n" " -d: report lat/long corners in decimal degrees instead of DMS.\n" " -tfw: Generate a .tfw (ESRI TIFF World) file for the target file.\n" " -proj4: Report PROJ.4 equivalent projection definition.\n" " -no_norm: Don't report 'normalized' parameter values.\n" " -no_corners: Don't report corner coordinates.\n" " filename: Name of the GeoTIFF file to report on.\n" ); exit( 1 ); } int main(int argc, char *argv[]) { char *fname = NULL; int norm_print_flag = 1; int proj4_print_flag = 0; int tfw_flag = 0; int inv_flag = 0; int dec_flag = 0; int st_test_flag = 0; int corners = 1; /* * Handle command line options. */ for( int i = 1; i < argc; i++ ) { if( strcmp(argv[i],"-no_norm") == 0 ) norm_print_flag = 0; else if( strcmp(argv[i],"-no_corners") == 0 ) corners = 0; else if( strcmp(argv[i],"-tfw") == 0 ) tfw_flag = 1; else if( strcmp(argv[i],"-proj4") == 0 ) proj4_print_flag = 1; else if( strcmp(argv[i],"-i") == 0 ) inv_flag = 1; else if( strcmp(argv[i],"-d") == 0 ) dec_flag = 1; else if( strcmp(argv[i],"-st_test") == 0 ) { st_test_flag = 1; norm_print_flag = 0; } else if( fname == NULL && argv[i][0] != '-' ) fname = argv[i]; else { Usage(); } } if( fname == NULL && !st_test_flag ) Usage(); /* * Open the file, read the GeoTIFF information, and print to stdout. */ TIFF *tif = NULL; /* TIFF-level descriptor */ GTIF *gtif = NULL; /* GeoKey-level descriptor */ if( st_test_flag ) { tif = st_setup_test_info(); gtif = GTIFNewSimpleTags( tif ); } else { tif=XTIFFOpen(fname,"r"); if (!tif) goto failure; gtif = GTIFNew(tif); if (!gtif) { fprintf(stderr,"failed in GTIFNew\n"); goto failure; } } if( tfw_flag ) { WriteTFWFile( gtif, fname ); goto Success; } /* dump the GeoTIFF metadata to std out */ GTIFPrint(gtif,0,0); /* * Capture, and report normalized information if requested. */ if( norm_print_flag ) { GTIFDefn defn; if( GTIFGetDefn( gtif, &defn ) ) { printf( "\n" ); GTIFPrintDefnEx( gtif, &defn, stdout ); if( proj4_print_flag ) { printf( "\n" ); printf( "PROJ.4 Definition: %s\n", GTIFGetProj4Defn(&defn)); } int xsize; TIFFGetField( tif, TIFFTAG_IMAGEWIDTH, &xsize ); int ysize; TIFFGetField( tif, TIFFTAG_IMAGELENGTH, &ysize ); if( corners ) GTIFPrintCorners( gtif, &defn, stdout, xsize, ysize, inv_flag, dec_flag ); } } Success: GTIFFree(gtif); if( st_test_flag ) ST_Destroy( (ST_TIFF *) tif ); else XTIFFClose(tif); return 0; failure: fprintf(stderr,"failure in listgeo\n"); if (tif) XTIFFClose(tif); if (gtif) GTIFFree(gtif); return 1; } /* * Report the file(s) corner coordinates in projected coordinates, and * if possible lat/long. */ static int GTIFReportACorner( GTIF *gtif, GTIFDefn *defn, FILE * fp_out, const char * corner_name, double x, double y, int inv_flag, int dec_flag ) { /* Try to transform the coordinate into PCS space */ if( !GTIFImageToPCS( gtif, &x, &y ) ) return FALSE; double x_saved = x; double y_saved = y; fprintf( fp_out, "%-13s ", corner_name ); if( defn->Model == ModelTypeGeographic ) { if (dec_flag) { fprintf( fp_out, "(%.7f,", x ); fprintf( fp_out, "%.7f)\n", y ); } else { fprintf( fp_out, "(%s,", GTIFDecToDMS( x, "Long", 2 ) ); fprintf( fp_out, "%s)\n", GTIFDecToDMS( y, "Lat", 2 ) ); } } else { fprintf( fp_out, "(%12.3f,%12.3f)", x, y ); if( GTIFProj4ToLatLong( defn, 1, &x, &y ) ) { if (dec_flag) { fprintf( fp_out, " (%.7f,", x ); fprintf( fp_out, "%.7f)", y ); } else { const char* pszLong = GTIFDecToDMS( x, "Long", 2 ); if( pszLong[0] == 0 ) { fprintf( fp_out, " (invalid)" ); } else { fprintf( fp_out, " (%s,", pszLong ); fprintf( fp_out, "%s)", GTIFDecToDMS( y, "Lat", 2 ) ); } } } fprintf( fp_out, "\n" ); } if( inv_flag && GTIFPCSToImage( gtif, &x_saved, &y_saved ) ) { fprintf( fp_out, " inverse (%11.3f,%11.3f)\n", x_saved, y_saved ); } return TRUE; } static void GTIFPrintCorners( GTIF *gtif, GTIFDefn *defn, FILE * fp_out, int xsize, int ysize, int inv_flag, int dec_flag ) { printf( "\nCorner Coordinates:\n" ); unsigned short raster_type = RasterPixelIsArea; GTIFKeyGetSHORT(gtif, GTRasterTypeGeoKey, &raster_type, 0, 1); const double xmin = (raster_type == RasterPixelIsArea) ? 0.0 : -0.5; const double ymin = xmin; const double ymax = ymin + ysize; const double xmax = xmin + xsize; if( !GTIFReportACorner( gtif, defn, fp_out, "Upper Left", xmin, ymin, inv_flag, dec_flag ) ) { printf( " ... unable to transform points between pixel/line and PCS space\n" ); return; } GTIFReportACorner( gtif, defn, fp_out, "Lower Left", xmin, ymax, inv_flag, dec_flag ); GTIFReportACorner( gtif, defn, fp_out, "Upper Right", xmax, ymin, inv_flag, dec_flag ); GTIFReportACorner( gtif, defn, fp_out, "Lower Right", xmax, ymax, inv_flag, dec_flag ); GTIFReportACorner( gtif, defn, fp_out, "Center", xmin + xsize/2.0, ymin + ysize/2.0, inv_flag, dec_flag ); } /* * Write the defining matrix for this file to a .tfw file with the same * basename. */ static void WriteTFWFile( GTIF * gtif, const char * tif_filename ) { /* * form .tfw filename */ char tfw_filename[1024]; strncpy( tfw_filename, tif_filename, sizeof(tfw_filename)-4 ); int i; /* Used after for */ for( i = strlen(tfw_filename)-1; i > 0; i-- ) { if( tfw_filename[i] == '.' ) { strcpy( tfw_filename + i, ".tfw" ); break; } } if( i <= 0 ) strcat( tfw_filename, ".tfw" ); /* * Compute the coefficients. */ double x = 0.5; double y = 0.5; if( !GTIFImageToPCS( gtif, &x, &y ) ) { fprintf( stderr, "Unable to translate image to PCS coordinates.\n" ); return; } double adfCoeff[6]; adfCoeff[4] = x; adfCoeff[5] = y; x = 1.5; y = 0.5; if( !GTIFImageToPCS( gtif, &x, &y ) ) return; adfCoeff[0] = x - adfCoeff[4]; adfCoeff[1] = y - adfCoeff[5]; x = 0.5; y = 1.5; if( !GTIFImageToPCS( gtif, &x, &y ) ) return; adfCoeff[2] = x - adfCoeff[4]; adfCoeff[3] = y - adfCoeff[5]; /* * Write out the coefficients. */ FILE *fp = fopen( tfw_filename, "wt" ); if( fp == NULL ) { perror( "fopen" ); fprintf( stderr, "Failed to open TFW file `%s'\n", tfw_filename ); return; } for( int i = 0; i < 6; i++ ) fprintf( fp, "%24.10f\n", adfCoeff[i] ); fclose( fp ); fprintf( stderr, "World file written to '%s'.\n", tfw_filename); } /************************************************************************/ /* st_setup_test_info() */ /* */ /* Setup a ST_TIFF structure for a simulated TIFF file. This */ /* is just a hack to test the ST_ interface. */ /************************************************************************/ static TIFF *st_setup_test_info() { ST_TIFF *st = ST_Create(); double dbl_data[100]; dbl_data[0] = 60; dbl_data[1] = 60; dbl_data[2] = 0; ST_SetKey( st, 33550, 3, STT_DOUBLE, dbl_data ); dbl_data[0] = 0; dbl_data[1] = 0; dbl_data[2] = 0; dbl_data[3] = 440720; dbl_data[4] = 3751320; dbl_data[5] = 0; ST_SetKey( st, 33922, 6, STT_DOUBLE, dbl_data ); unsigned short shrt_data[] = { 1,1,0,6,1024,0,1,1,1025,0,1,1,1026,34737,17,0,2052,0,1,9001,2054,0,1,9102,3072,0,1,26711 }; ST_SetKey( st, 34735, sizeof(shrt_data)/2, STT_SHORT, shrt_data ); char *ascii_data = "UTM 11 S E000|"; ST_SetKey( st, 34737, strlen(ascii_data)+1, STT_ASCII, ascii_data ); return (TIFF *) st; } libgeotiff-1.7.4/bin/CMakeLists.txt0000664000175000017500000000254114627631241014100 00000000000000############################################################################### # # CMake configuration file to build GeoTIFF utility programs # # Author: Mateusz Loskot # ############################################################################### INCLUDE_DIRECTORIES( . ${CMAKE_SOURCE_DIR}) IF(WIN32 AND MSVC) SET(GETOPT_SOURCE getopt.c) ENDIF() ############################################################################### # Collect programs to build SET(GEOTIFF_UTILITIES makegeo listgeo applygeo) MESSAGE(STATUS "Adding GeoTIFF utilities to build") FOREACH(utility ${GEOTIFF_UTILITIES}) ADD_EXECUTABLE(${utility} ${utility}.c ${GETOPT_SOURCE}) TARGET_LINK_LIBRARIES(${utility} PRIVATE ${GEOTIFF_LIBRARY_TARGET}) ENDFOREACH() ADD_EXECUTABLE(geotifcp geotifcp.c ${GETOPT_SOURCE}) TARGET_LINK_LIBRARIES(geotifcp PRIVATE ${GEOTIFF_LIBRARY_TARGET} ${JPEG_LIBRARIES} ${ZLIB_LIBRARIES}) SET(GEOTIFF_UTILITIES ${GEOTIFF_UTILITIES} geotifcp ) MESSAGE(STATUS "Adding GeoTIFF utilities to build - done: ${GEOTIFF_UTILITIES}") ############################################################################### # Targets installation INSTALL(TARGETS ${GEOTIFF_UTILITIES} RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR} LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR} ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR}) libgeotiff-1.7.4/bin/geotifcp.c0000664000175000017500000011642714755111300013304 00000000000000/* geotifcp.c -- based on Sam Leffler's "tiffcp" code */ /* * Original code had this copyright notice: * * Copyright (c) 1988-1995 Sam Leffler * Copyright (c) 1991-1995 Silicon Graphics, Inc. * * and a lot of legal stuff denying liability for anything. */ #include #include #include #include #include /* GeoTIFF overrides */ #include "geotiff.h" #include "geo_normalize.h" #include "geo_tiffp.h" #include "geo_keyp.h" #include "xtiffio.h" #include "cpl_serv.h" #define TIFFOpen XTIFFOpen #define TIFFClose XTIFFClose #if defined(VMS) #define unlink delete #endif #define streq(a,b) (strcmp(a,b) == 0) #define strneq(a,b,n) (strncmp(a,b,n) == 0) #define TRUE 1 #define FALSE 0 int getopt(int nargc, char** nargv, char* ostr); static int outtiled = -1; static uint32_t tilewidth; static uint32_t tilelength; static int convert_8_to_4 = 0; static uint16_t config; static uint16_t compression; static uint16_t predictor; static uint16_t fillorder; static uint32_t rowsperstrip; static uint32_t g3opts; static int ignore = FALSE; /* if true, ignore read errors */ static uint32_t defg3opts = (uint32_t) -1; static int quality = 75; /* JPEG quality */ static int jpegcolormode = JPEGCOLORMODE_RGB; static uint16_t defcompression = (uint16_t) -1; static uint16_t defpredictor = (uint16_t) -1; static char *geofile=(char *)0; static char *proj4_string = (char *) 0; static char *worldfile=(char *)0; static void ApplyWorldFile(const char *worldfile, TIFF *out); static int tiffcp(TIFF*, TIFF*); static int processCompressOptions(char*); static void usage(void); static int forced_version = 0; static unsigned short version = 0; static unsigned short key_version = 0; static unsigned short minor_revision = 0; static int parseVersion(const char* str) { if( strlen(str) != 5 || str[1] != ':' || str[3] != ':' ) return 0; if( str[0] < '0' || str[0] > '9' ) return 0; if( str[2] < '0' || str[2] > '9' ) return 0; if( str[4] < '0' || str[4] > '9' ) return 0; forced_version = 1; version = str[0] - '0'; key_version = str[2] - '0'; minor_revision = str[4] - '0'; return 1; } static void SetVersionNumbers(GTIF* gtif) { if( forced_version ) { GTIFSetVersionNumbers(gtif, version, key_version, minor_revision); } } int main(int argc, char* argv[]) { uint16_t defconfig = (uint16_t) -1; uint16_t deffillorder = 0; uint32_t deftilewidth = (uint32_t) -1; uint32_t deftilelength = (uint32_t) -1; uint32_t defrowsperstrip = (uint32_t) -1; uint32_t diroff = 0; char mode[10]; char* mp = mode; int c; extern char* optarg; *mp++ = 'w'; *mp = '\0'; while ((c = getopt(argc, argv, "c:f:l:o:p:r:w:e:g:4:v:aistd8BLMC")) != -1) switch (c) { case 'a': /* append to output */ mode[0] = 'a'; break; case 'd': /* down cast 8bit to 4bit */ convert_8_to_4 = 1; break; case 'c': /* compression scheme */ if (!processCompressOptions(optarg)) usage(); break; case 'e': worldfile = optarg; break; case 'f': /* fill order */ if (streq(optarg, "lsb2msb")) deffillorder = FILLORDER_LSB2MSB; else if (streq(optarg, "msb2lsb")) deffillorder = FILLORDER_MSB2LSB; else usage(); break; case 'i': /* ignore errors */ ignore = TRUE; break; case 'g': /* GeoTIFF metadata file */ geofile = optarg; break; case '4': proj4_string = optarg; break; case 'l': /* tile length */ outtiled = TRUE; deftilelength = atoi(optarg); break; case 'o': /* initial directory offset */ diroff = strtoul(optarg, NULL, 0); break; case 'p': /* planar configuration */ if (streq(optarg, "separate")) defconfig = PLANARCONFIG_SEPARATE; else if (streq(optarg, "contig")) defconfig = PLANARCONFIG_CONTIG; else usage(); break; case 'r': /* rows/strip */ defrowsperstrip = atoi(optarg); break; case 's': /* generate stripped output */ outtiled = FALSE; break; case 't': /* generate tiled output */ outtiled = TRUE; break; case 'w': /* tile width */ outtiled = TRUE; deftilewidth = atoi(optarg); break; case 'B': *mp++ = 'b'; *mp = '\0'; break; case 'L': *mp++ = 'l'; *mp = '\0'; break; case 'M': *mp++ = 'm'; *mp = '\0'; break; case 'C': *mp++ = 'c'; *mp = '\0'; break; case '8': *mp++ = '8'; *mp = '\0'; break; case 'v': if (!parseVersion(optarg)) usage(); break; case '?': usage(); /*NOTREACHED*/ } extern int optind; if (argc - optind < 2) usage(); printf( "mode=%s\n", mode); TIFF *out = TIFFOpen(argv[argc-1], mode); if (out == NULL) return (-2); for (; optind < argc-1 ; optind++) { TIFF *in = TIFFOpen(argv[optind], "r"); if (in == NULL) return (-3); if (diroff != 0 && !TIFFSetSubDirectory(in, diroff)) { TIFFError(TIFFFileName(in), "Error, setting subdirectory at %#x", diroff); (void) TIFFClose(out); return (1); } do { config = defconfig; compression = defcompression; predictor = defpredictor; fillorder = deffillorder; rowsperstrip = defrowsperstrip; tilewidth = deftilewidth; tilelength = deftilelength; g3opts = defg3opts; if (!tiffcp(in, out) || !TIFFWriteDirectory(out)) { (void) TIFFClose(out); return (1); } } while (TIFFReadDirectory(in)); (void) TIFFClose(in); } (void) TIFFClose(out); return (0); } static void ApplyWorldFile(const char *worldfilename, TIFF *out) { FILE *tfw; double pixsize[3], xoff, yoff, tiepoint[6], x_rot, y_rot; int success; /* * Read the world file. Note we currently ignore rotational coefficients! */ tfw = fopen( worldfilename, "rt" ); if( tfw == NULL ) { perror( worldfilename ); return; } success = fscanf( tfw, "%lf", pixsize + 0 ); success &= fscanf( tfw, "%lf", &y_rot ); success &= fscanf( tfw, "%lf", &x_rot ); success &= fscanf( tfw, "%lf", pixsize + 1 ); success &= fscanf( tfw, "%lf", &xoff ); success &= fscanf( tfw, "%lf", &yoff ); fclose( tfw ); if( success != 1 ) { fprintf( stderr, "Failure parsing one or more lines of world file.\n"); return; } /* * Write out pixel scale, and tiepoint information. */ if( x_rot == 0.0 && y_rot == 0.0 ) { pixsize[1] = ABS(pixsize[1]); pixsize[2] = 0.0; TIFFSetField(out, GTIFF_PIXELSCALE, 3, pixsize); tiepoint[0] = 0.5; tiepoint[1] = 0.5; tiepoint[2] = 0.0; tiepoint[3] = xoff; tiepoint[4] = yoff; tiepoint[5] = 0.0; TIFFSetField(out, GTIFF_TIEPOINTS, 6, tiepoint); } else { double adfMatrix[16]; memset(adfMatrix,0,sizeof(double) * 16); adfMatrix[0] = pixsize[0]; adfMatrix[1] = x_rot; adfMatrix[3] = xoff - (pixsize[0]+x_rot) * 0.5; adfMatrix[4] = y_rot; adfMatrix[5] = pixsize[1]; adfMatrix[7] = yoff - (pixsize[1]+y_rot) * 0.5; adfMatrix[15] = 1.0; TIFFSetField( out, TIFFTAG_GEOTRANSMATRIX, 16, adfMatrix ); } } static void InstallGeoTIFF(TIFF *out) { GTIF *gtif; /* GeoKey-level descriptor */ FILE *fd; gtif = GTIFNew(out); if (!gtif) { printf("failed in GTIFNew\n"); return; } if( geofile ) { /* Install keys and tags */ fd = fopen(geofile,"r"); if( fd == NULL ) { perror( geofile ); exit( -1 ); } if (!GTIFImport(gtif,0,fd)) { fprintf(stderr,"Failure in GTIFImport\n"); exit (-1); } fclose(fd); } else if( proj4_string ) { if( !GTIFSetFromProj4(gtif,proj4_string) ) { fprintf(stderr,"Failure in GTIFSetFromProj4\n"); exit (-1); } } SetVersionNumbers(gtif); GTIFWriteKeys(gtif); GTIFFree(gtif); return; } static void CopyGeoTIFF(TIFF * in, TIFF *out) { GTIF *gtif; /* GeoKey-level descriptor */ double *d_list = NULL; int16_t d_list_count; /* read definition from source file. */ gtif = GTIFNew(in); if (!gtif) return; if (TIFFGetField(in, GTIFF_TIEPOINTS, &d_list_count, &d_list)) TIFFSetField(out, GTIFF_TIEPOINTS, d_list_count, d_list); if (TIFFGetField(in, GTIFF_PIXELSCALE, &d_list_count, &d_list)) TIFFSetField(out, GTIFF_PIXELSCALE, d_list_count, d_list); if (TIFFGetField(in, GTIFF_TRANSMATRIX, &d_list_count, &d_list)) TIFFSetField(out, GTIFF_TRANSMATRIX, d_list_count, d_list); /* Here we violate the GTIF abstraction to retarget on another file. We should just have a function for copying tags from one GTIF object to another. */ gtif->gt_tif = out; gtif->gt_flags |= FLAG_FILE_MODIFIED; /* Install keys and tags */ SetVersionNumbers(gtif); GTIFWriteKeys(gtif); GTIFFree(gtif); return; } static void processG3Options(char* cp) { if( (cp = strchr(cp, ':')) != NULL ) { if (defg3opts == (uint32_t) -1) defg3opts = 0; do { cp++; if (strneq(cp, "1d", 2)) defg3opts &= ~GROUP3OPT_2DENCODING; else if (strneq(cp, "2d", 2)) defg3opts |= GROUP3OPT_2DENCODING; else if (strneq(cp, "fill", 4)) defg3opts |= GROUP3OPT_FILLBITS; else usage(); } while( (cp = strchr(cp, ':')) != NULL ); } } static int processCompressOptions(char* opt) { if (streq(opt, "none")) defcompression = COMPRESSION_NONE; else if (streq(opt, "packbits")) defcompression = COMPRESSION_PACKBITS; else if (strneq(opt, "jpeg", 4)) { char* cp = strchr(opt, ':'); if (cp && isdigit(cp[1])) quality = atoi(cp+1); if (cp && strchr(cp, 'r')) jpegcolormode = JPEGCOLORMODE_RAW; defcompression = COMPRESSION_JPEG; } else if (strneq(opt, "g3", 2)) { processG3Options(opt); defcompression = COMPRESSION_CCITTFAX3; } else if (streq(opt, "g4")) defcompression = COMPRESSION_CCITTFAX4; else if (strneq(opt, "lzw", 3)) { char* cp = strchr(opt, ':'); if (cp) defpredictor = atoi(cp+1); defcompression = COMPRESSION_LZW; } else if (strneq(opt, "zip", 3)) { char* cp = strchr(opt, ':'); if (cp) defpredictor = atoi(cp+1); defcompression = COMPRESSION_DEFLATE; } else return (0); return (1); } char* stuff[] = { "usage: gtiffcp [options] input... output", "where options are:", " -g file install GeoTIFF metadata from ", " -4 proj4_str install GeoTIFF metadata from proj4 string", " -e file install positioning info from ESRI Worldfile ", " -v v:k:m force the GeoTIFF version numbers (v=version, k=key_major, m=minor_rev)", " -a append to output instead of overwriting", " -8 write BigTIFF instead of default ClassicTIFF", " -o offset set initial directory offset", " -p contig pack samples contiguously (e.g. RGBRGB...)", " -p separate store samples separately (e.g. RRR...GGG...BBB...)", " -s write output in strips", " -t write output in tiles", " -i ignore read errors", " -d truncate 8 bitspersample to 4bitspersample", "", " -r # make each strip have no more than # rows", " -w # set output tile width (pixels)", " -l # set output tile length (pixels)", "", " -f lsb2msb force lsb-to-msb FillOrder for output", " -f msb2lsb force msb-to-lsb FillOrder for output", "", " -c lzw[:opts] compress output with Lempel-Ziv & Welch encoding", " -c zip[:opts] compress output with deflate encoding", " -c jpeg[:opts]compress output with JPEG encoding", " -c packbits compress output with packbits encoding", " -c g3[:opts] compress output with CCITT Group 3 encoding", " -c g4 compress output with CCITT Group 4 encoding", " -c none use no compression algorithm on output", "", "Group 3 options:", " 1d use default CCITT Group 3 1D-encoding", " 2d use optional CCITT Group 3 2D-encoding", " fill byte-align EOL codes", "For example, -c g3:2d:fill to get G3-2D-encoded data with byte-aligned EOLs", "", "JPEG options:", " # set compression quality level (0-100, default 75)", " r output color image as RGB rather than YCbCr", "For example, -c jpeg:r:50 to get JPEG-encoded RGB data with 50% comp. quality", "", "LZW and deflate options:", " # set predictor value", "For example, -c lzw:2 to get LZW-encoded data with horizontal differencing", NULL }; static void usage(void) { char buf[BUFSIZ]; int i; setbuf(stderr, buf); for (i = 0; stuff[i] != NULL; i++) fprintf(stderr, "%s\n", stuff[i]); exit(-1); } static void CheckAndCorrectColormap(TIFF* tif, int n, uint16_t* r, uint16_t* g, uint16_t* b) { int i; for (i = 0; i < n; i++) if (r[i] >= 256 || g[i] >= 256 || b[i] >= 256) return; TIFFWarning(TIFFFileName(tif), "Scaling 8-bit colormap"); #define CVT(x) (((x) * ((1L<<16)-1)) / 255) for (i = 0; i < n; i++) { r[i] = CVT(r[i]); g[i] = CVT(g[i]); b[i] = CVT(b[i]); } #undef CVT } #define CopyField(tag, v) \ if (TIFFGetField(in, tag, &v)) TIFFSetField(out, tag, v) #define CopyField2(tag, v1, v2) \ if (TIFFGetField(in, tag, &v1, &v2)) TIFFSetField(out, tag, v1, v2) #define CopyField3(tag, v1, v2, v3) \ if (TIFFGetField(in, tag, &v1, &v2, &v3)) TIFFSetField(out, tag, v1, v2, v3) #define CopyField4(tag, v1, v2, v3, v4) \ if (TIFFGetField(in, tag, &v1, &v2, &v3, &v4)) TIFFSetField(out, tag, v1, v2, v3, v4) static struct cpTag { uint16_t tag; uint16_t count; TIFFDataType type; } tags[] = { { TIFFTAG_SUBFILETYPE, 1, TIFF_LONG }, { TIFFTAG_THRESHHOLDING, 1, TIFF_SHORT }, { TIFFTAG_DOCUMENTNAME, 1, TIFF_ASCII }, { TIFFTAG_IMAGEDESCRIPTION, 1, TIFF_ASCII }, { TIFFTAG_MAKE, 1, TIFF_ASCII }, { TIFFTAG_MODEL, 1, TIFF_ASCII }, { TIFFTAG_ORIENTATION, 1, TIFF_SHORT }, { TIFFTAG_MINSAMPLEVALUE, 1, TIFF_SHORT }, { TIFFTAG_MAXSAMPLEVALUE, 1, TIFF_SHORT }, { TIFFTAG_XRESOLUTION, 1, TIFF_RATIONAL }, { TIFFTAG_YRESOLUTION, 1, TIFF_RATIONAL }, { TIFFTAG_PAGENAME, 1, TIFF_ASCII }, { TIFFTAG_XPOSITION, 1, TIFF_RATIONAL }, { TIFFTAG_YPOSITION, 1, TIFF_RATIONAL }, { TIFFTAG_GROUP4OPTIONS, 1, TIFF_LONG }, { TIFFTAG_RESOLUTIONUNIT, 1, TIFF_SHORT }, { TIFFTAG_PAGENUMBER, 2, TIFF_SHORT }, { TIFFTAG_SOFTWARE, 1, TIFF_ASCII }, { TIFFTAG_DATETIME, 1, TIFF_ASCII }, { TIFFTAG_ARTIST, 1, TIFF_ASCII }, { TIFFTAG_HOSTCOMPUTER, 1, TIFF_ASCII }, { TIFFTAG_WHITEPOINT, (uint16_t) -1,TIFF_RATIONAL }, { TIFFTAG_PRIMARYCHROMATICITIES,(uint16_t) -1,TIFF_RATIONAL }, { TIFFTAG_HALFTONEHINTS, 2, TIFF_SHORT }, { TIFFTAG_BADFAXLINES, 1, TIFF_LONG }, { TIFFTAG_CLEANFAXDATA, 1, TIFF_SHORT }, { TIFFTAG_CONSECUTIVEBADFAXLINES,1, TIFF_LONG }, { TIFFTAG_INKSET, 1, TIFF_SHORT }, { TIFFTAG_INKNAMES, 1, TIFF_ASCII }, { TIFFTAG_DOTRANGE, 2, TIFF_SHORT }, { TIFFTAG_TARGETPRINTER, 1, TIFF_ASCII }, { TIFFTAG_SAMPLEFORMAT, 1, TIFF_SHORT }, { TIFFTAG_YCBCRCOEFFICIENTS, (uint16_t) -1,TIFF_RATIONAL }, { TIFFTAG_YCBCRSUBSAMPLING, 2, TIFF_SHORT }, { TIFFTAG_YCBCRPOSITIONING, 1, TIFF_SHORT }, { TIFFTAG_REFERENCEBLACKWHITE, (uint16_t) -1,TIFF_RATIONAL }, { TIFFTAG_EXTRASAMPLES, (uint16_t) -1, TIFF_SHORT }, { TIFFTAG_SMINSAMPLEVALUE, 1, TIFF_DOUBLE }, { TIFFTAG_SMAXSAMPLEVALUE, 1, TIFF_DOUBLE }, }; #define NTAGS (sizeof (tags) / sizeof (tags[0])) static void cpOtherTags(TIFF* in, TIFF* out) { struct cpTag *p; for (p = tags; p < &tags[NTAGS]; p++) switch (p->type) { case TIFF_SHORT: if (p->count == 1) { uint16_t shortv; CopyField(p->tag, shortv); } else if (p->count == 2) { uint16_t shortv1, shortv2; CopyField2(p->tag, shortv1, shortv2); } else if (p->count == (uint16_t) -1) { uint16_t shortv1; uint16_t* shortav; CopyField2(p->tag, shortv1, shortav); } break; case TIFF_LONG: { uint32_t longv; CopyField(p->tag, longv); } break; case TIFF_RATIONAL: if (p->count == 1) { float floatv; CopyField(p->tag, floatv); } else if (p->count == (uint16_t) -1) { float* floatav; CopyField(p->tag, floatav); } break; case TIFF_ASCII: { char* stringv; CopyField(p->tag, stringv); } break; case TIFF_DOUBLE: if (p->count == 1) { double doublev; CopyField(p->tag, doublev); } else if (p->count == (uint16_t) -1) { double* doubleav; CopyField(p->tag, doubleav); } break; default: break; } } typedef int (*copyFunc) (TIFF* in, TIFF* out, uint32_t l, uint32_t w, uint16_t samplesperpixel); static copyFunc pickCopyFunc(TIFF*, TIFF*, uint16_t, uint16_t); static int tiffcp(TIFF* in, TIFF* out) { uint16_t bitspersample = 0, samplesperpixel, shortv; copyFunc cf; uint32_t w, l; CopyField(TIFFTAG_IMAGEWIDTH, w); CopyField(TIFFTAG_IMAGELENGTH, l); if( convert_8_to_4 ) { TIFFSetField(out, TIFFTAG_BITSPERSAMPLE, 4); } else { CopyField(TIFFTAG_BITSPERSAMPLE, bitspersample); } if (compression != (uint16_t)-1) TIFFSetField(out, TIFFTAG_COMPRESSION, compression); else CopyField(TIFFTAG_COMPRESSION, compression); if (compression == COMPRESSION_JPEG && jpegcolormode == JPEGCOLORMODE_RGB) TIFFSetField(out, TIFFTAG_PHOTOMETRIC, PHOTOMETRIC_YCBCR); else CopyField(TIFFTAG_PHOTOMETRIC, shortv); if (fillorder != 0) TIFFSetField(out, TIFFTAG_FILLORDER, fillorder); else CopyField(TIFFTAG_FILLORDER, shortv); CopyField(TIFFTAG_SAMPLESPERPIXEL, samplesperpixel); /* * Choose tiles/strip for the output image according to * the command line arguments (-tiles, -strips) and the * structure of the input image. */ if (outtiled == -1) outtiled = TIFFIsTiled(in); if (outtiled) { /* * Setup output file's tile width&height. If either * is not specified, use either the value from the * input image or, if nothing is defined, use the * library default. */ if (tilewidth == (uint32_t) -1) TIFFGetField(in, TIFFTAG_TILEWIDTH, &tilewidth); if (tilelength == (uint32_t) -1) TIFFGetField(in, TIFFTAG_TILELENGTH, &tilelength); TIFFDefaultTileSize(out, &tilewidth, &tilelength); TIFFSetField(out, TIFFTAG_TILEWIDTH, tilewidth); TIFFSetField(out, TIFFTAG_TILELENGTH, tilelength); } else { /* * RowsPerStrip is left unspecified: use either the * value from the input image or, if nothing is defined, * use the library default. */ if (rowsperstrip == (uint32_t) -1) TIFFGetField(in, TIFFTAG_ROWSPERSTRIP, &rowsperstrip); rowsperstrip = TIFFDefaultStripSize(out, rowsperstrip); TIFFSetField(out, TIFFTAG_ROWSPERSTRIP, rowsperstrip); } if (config != (uint16_t) -1) TIFFSetField(out, TIFFTAG_PLANARCONFIG, config); else CopyField(TIFFTAG_PLANARCONFIG, config); if (g3opts != (uint32_t) -1) TIFFSetField(out, TIFFTAG_GROUP3OPTIONS, g3opts); else CopyField(TIFFTAG_GROUP3OPTIONS, g3opts); if (samplesperpixel <= 4) { uint16_t *tr, *tg, *tb, *ta; CopyField4(TIFFTAG_TRANSFERFUNCTION, tr, tg, tb, ta); } { uint16_t *red, *green, *blue; if (TIFFGetField(in, TIFFTAG_COLORMAP, &red, &green, &blue)) { CheckAndCorrectColormap(in, 1< contig by scanline for rows/strip change. */ DECLAREcpFunc(cpContig2ContigByRow) { unsigned char *buf = (unsigned char *)_TIFFmalloc(TIFFScanlineSize(in)); uint32_t row; (void) imagewidth; (void) spp; for (row = 0; row < imagelength; row++) { if (TIFFReadScanline(in, buf, row, 0) < 0 && !ignore) goto done; if (TIFFWriteScanline(out, buf, row, 0) < 0) goto bad; } done: _TIFFfree(buf); return (TRUE); bad: _TIFFfree(buf); return (FALSE); } /* * Contig -> contig by scanline for rows/strip change. */ DECLAREcpFunc(cpContig2ContigByRow_8_to_4) { unsigned char *buf_in = (unsigned char *)_TIFFmalloc(TIFFScanlineSize(in)); unsigned char *buf_out = (unsigned char *)_TIFFmalloc(TIFFScanlineSize(out)); uint32_t row; printf( "Downsample\n" ); (void) spp; for (row = 0; row < imagelength; row++) { int i_in, i_out_byte; if (TIFFReadScanline(in, buf_in, row, 0) < 0 && !ignore) goto done; for( i_in = 0, i_out_byte = 0; (unsigned)i_in < imagewidth; i_in += 2, i_out_byte++ ) { buf_out[i_out_byte] = (buf_in[i_in] & 0xf)*16 + (buf_in[i_in+1] & 0xf); } if (TIFFWriteScanline(out, buf_out, row, 0) < 0) goto bad; } done: _TIFFfree(buf_in); _TIFFfree(buf_out); return (TRUE); bad: _TIFFfree(buf_in); _TIFFfree(buf_out); return (FALSE); } /* * Strip -> strip for change in encoding. */ DECLAREcpFunc(cpDecodedStrips) { tsize_t stripsize = TIFFStripSize(in); unsigned char *buf = (unsigned char *)_TIFFmalloc(stripsize); (void) imagewidth; (void) spp; if (buf) { tstrip_t s, ns = TIFFNumberOfStrips(in); uint32_t row = 0; for (s = 0; s < ns; s++) { tsize_t cc = (row + rowsperstrip > imagelength) ? TIFFVStripSize(in, imagelength - row) : stripsize; if (TIFFReadEncodedStrip(in, s, buf, cc) < 0 && !ignore) break; if (TIFFWriteEncodedStrip(out, s, buf, cc) < 0) { _TIFFfree(buf); return (FALSE); } row += rowsperstrip; } _TIFFfree(buf); return (TRUE); } return (FALSE); } /* * Separate -> separate by row for rows/strip change. */ DECLAREcpFunc(cpSeparate2SeparateByRow) { unsigned char *buf = (unsigned char *)_TIFFmalloc(TIFFScanlineSize(in)); uint32_t row; tsample_t s; (void) imagewidth; for (s = 0; s < spp; s++) { for (row = 0; row < imagelength; row++) { if (TIFFReadScanline(in, buf, row, s) < 0 && !ignore) goto done; if (TIFFWriteScanline(out, buf, row, s) < 0) goto bad; } } done: _TIFFfree(buf); return (TRUE); bad: _TIFFfree(buf); return (FALSE); } /* * Contig -> separate by row. */ DECLAREcpFunc(cpContig2SeparateByRow) { unsigned char *inbuf = (unsigned char *)_TIFFmalloc(TIFFScanlineSize(in)); unsigned char *outbuf = (unsigned char *)_TIFFmalloc(TIFFScanlineSize(out)); register unsigned char *inp, *outp; register uint32_t n; uint32_t row; tsample_t s; /* unpack channels */ for (s = 0; s < spp; s++) { for (row = 0; row < imagelength; row++) { if (TIFFReadScanline(in, inbuf, row, 0) < 0 && !ignore) goto done; inp = inbuf + s; outp = outbuf; for (n = imagewidth; n-- > 0;) { *outp++ = *inp; inp += spp; } if (TIFFWriteScanline(out, outbuf, row, s) < 0) goto bad; } } done: if (inbuf) _TIFFfree(inbuf); if (outbuf) _TIFFfree(outbuf); return (TRUE); bad: if (inbuf) _TIFFfree(inbuf); if (outbuf) _TIFFfree(outbuf); return (FALSE); } /* * Separate -> contig by row. */ DECLAREcpFunc(cpSeparate2ContigByRow) { unsigned char *inbuf = (unsigned char *)_TIFFmalloc(TIFFScanlineSize(in)); unsigned char *outbuf = (unsigned char *)_TIFFmalloc(TIFFScanlineSize(out)); register unsigned char *inp, *outp; register uint32_t n; uint32_t row; tsample_t s; for (row = 0; row < imagelength; row++) { /* merge channels */ for (s = 0; s < spp; s++) { if (TIFFReadScanline(in, inbuf, row, s) < 0 && !ignore) goto done; inp = inbuf; outp = outbuf + s; for (n = imagewidth; n-- > 0;) { *outp = *inp++; outp += spp; } } if (TIFFWriteScanline(out, outbuf, row, 0) < 0) goto bad; } done: if (inbuf) _TIFFfree(inbuf); if (outbuf) _TIFFfree(outbuf); return (TRUE); bad: if (inbuf) _TIFFfree(inbuf); if (outbuf) _TIFFfree(outbuf); return (FALSE); } static void cpStripToTile(unsigned char* out, unsigned char* in, uint32_t rows, uint32_t cols, int outskew, int inskew) { while (rows-- > 0) { uint32_t j = cols; while (j-- > 0) *out++ = *in++; out += outskew; in += inskew; } } static void cpContigBufToSeparateBuf(unsigned char* out, unsigned char* in, uint32_t rows, uint32_t cols, int outskew, int inskew, tsample_t spp) { while (rows-- > 0) { uint32_t j = cols; while (j-- > 0) *out++ = *in, in += spp; out += outskew; in += inskew; } } static void cpSeparateBufToContigBuf(unsigned char* out, unsigned char* in, uint32_t rows, uint32_t cols, int outskew, int inskew, tsample_t spp) { while (rows-- > 0) { uint32_t j = cols; while (j-- > 0) *out = *in++, out += spp; out += outskew; in += inskew; } } static int cpImage(TIFF* in, TIFF* out, readFunc fin, writeFunc fout, uint32_t imagelength, uint32_t imagewidth, tsample_t spp) { int status = FALSE; unsigned char* buf = (unsigned char *) _TIFFmalloc(TIFFRasterScanlineSize(in) * imagelength); if (buf) { (*fin)(in, buf, imagelength, imagewidth, spp); status = (fout)(out, buf, imagelength, imagewidth, spp); _TIFFfree(buf); } return (status); } DECLAREreadFunc(readContigStripsIntoBuffer) { tsize_t scanlinesize = TIFFScanlineSize(in); unsigned char *bufp = buf; uint32_t row; (void) imagewidth; (void) spp; for (row = 0; row < imagelength; row++) { if (TIFFReadScanline(in, bufp, row, 0) < 0 && !ignore) break; bufp += scanlinesize; } } DECLAREreadFunc(readSeparateStripsIntoBuffer) { tsize_t scanlinesize = TIFFScanlineSize(in); unsigned char* scanline = (unsigned char *) _TIFFmalloc(scanlinesize); (void) imagewidth; if (scanline) { unsigned char *bufp = buf; uint32_t row; tsample_t s; for (row = 0; row < imagelength; row++) { /* merge channels */ for (s = 0; s < spp; s++) { unsigned char* sp = scanline; unsigned char* bp = bufp + s; tsize_t n = scanlinesize; if (TIFFReadScanline(in, sp, row, s) < 0 && !ignore) goto done; while (n-- > 0) *bp = *bufp++, bp += spp; } bufp += scanlinesize; } done: _TIFFfree(scanline); } } DECLAREreadFunc(readContigTilesIntoBuffer) { unsigned char* tilebuf = (unsigned char *) _TIFFmalloc(TIFFTileSize(in)); uint32_t imagew = TIFFScanlineSize(in); uint32_t tilew = TIFFTileRowSize(in); int iskew = imagew - tilew; unsigned char *bufp = buf; uint32_t tw, tl; uint32_t row; (void) spp; if (tilebuf == 0) return; (void) TIFFGetField(in, TIFFTAG_TILEWIDTH, &tw); (void) TIFFGetField(in, TIFFTAG_TILELENGTH, &tl); for (row = 0; row < imagelength; row += tl) { uint32_t nrow = (row+tl > imagelength) ? imagelength-row : tl; uint32_t colb = 0; uint32_t col; for (col = 0; col < imagewidth; col += tw) { if (TIFFReadTile(in, tilebuf, col, row, 0, 0) < 0 && !ignore) goto done; if (colb + tilew > imagew) { uint32_t width = imagew - colb; uint32_t oskew = tilew - width; cpStripToTile(bufp + colb, tilebuf, nrow, width, oskew + iskew, oskew); } else cpStripToTile(bufp + colb, tilebuf, nrow, tilew, iskew, 0); colb += tilew; } bufp += imagew * nrow; } done: _TIFFfree(tilebuf); } DECLAREreadFunc(readSeparateTilesIntoBuffer) { uint32_t imagew = TIFFScanlineSize(in); uint32_t tilew = TIFFTileRowSize(in); int iskew = imagew - tilew; unsigned char* tilebuf = (unsigned char *) _TIFFmalloc(TIFFTileSize(in)); unsigned char *bufp = buf; uint32_t tw, tl; uint32_t row; if (tilebuf == 0) return; (void) TIFFGetField(in, TIFFTAG_TILEWIDTH, &tw); (void) TIFFGetField(in, TIFFTAG_TILELENGTH, &tl); for (row = 0; row < imagelength; row += tl) { uint32_t nrow = (row+tl > imagelength) ? imagelength-row : tl; uint32_t colb = 0; uint32_t col; for (col = 0; col < imagewidth; col += tw) { tsample_t s; for (s = 0; s < spp; s++) { if (TIFFReadTile(in, tilebuf, col, row, 0, s) < 0 && !ignore) goto done; /* * Tile is clipped horizontally. Calculate * visible portion and skewing factors. */ if (colb + tilew > imagew) { uint32_t width = imagew - colb; int oskew = tilew - width; cpSeparateBufToContigBuf(bufp+colb+s, tilebuf, nrow, width, oskew + iskew, oskew, spp); } else cpSeparateBufToContigBuf(bufp+colb+s, tilebuf, nrow, tw, iskew, 0, spp); } colb += tilew; } bufp += imagew * nrow; } done: _TIFFfree(tilebuf); } DECLAREwriteFunc(writeBufferToContigStrips) { tsize_t scanline = TIFFScanlineSize(out); uint32_t row; (void) imagewidth; (void) spp; for (row = 0; row < imagelength; row++) { if (TIFFWriteScanline(out, buf, row, 0) < 0) return (FALSE); buf += scanline; } return (TRUE); } DECLAREwriteFunc(writeBufferToSeparateStrips) { unsigned char *obuf = (unsigned char *) _TIFFmalloc(TIFFScanlineSize(out)); tsample_t s; if (obuf == NULL) return (0); for (s = 0; s < spp; s++) { uint32_t row; for (row = 0; row < imagelength; row++) { unsigned char* inp = buf + s; unsigned char* outp = obuf; uint32_t n = imagewidth; while (n-- > 0) *outp++ = *inp, inp += spp; if (TIFFWriteScanline(out, obuf, row, s) < 0) { _TIFFfree(obuf); return (FALSE); } } } _TIFFfree(obuf); return (TRUE); } DECLAREwriteFunc(writeBufferToContigTiles) { uint32_t imagew = TIFFScanlineSize(out); uint32_t tilew = TIFFTileRowSize(out); int iskew = imagew - tilew; unsigned char* obuf = (unsigned char *) _TIFFmalloc(TIFFTileSize(out)); unsigned char* bufp = buf; uint32_t tl, tw; uint32_t row; (void) spp; if (obuf == NULL) return (FALSE); (void) TIFFGetField(out, TIFFTAG_TILELENGTH, &tl); (void) TIFFGetField(out, TIFFTAG_TILEWIDTH, &tw); for (row = 0; row < imagelength; row += tilelength) { uint32_t nrow = (row+tl > imagelength) ? imagelength-row : tl; uint32_t colb = 0; uint32_t col; for (col = 0; col < imagewidth; col += tw) { /* * Tile is clipped horizontally. Calculate * visible portion and skewing factors. */ if (colb + tilew > imagew) { uint32_t width = imagew - colb; int oskew = tilew - width; cpStripToTile(obuf, bufp + colb, nrow, width, oskew, oskew + iskew); } else cpStripToTile(obuf, bufp + colb, nrow, tilew, 0, iskew); if (TIFFWriteTile(out, obuf, col, row, 0, 0) < 0) { _TIFFfree(obuf); return (FALSE); } colb += tilew; } bufp += nrow * imagew; } _TIFFfree(obuf); return (TRUE); } DECLAREwriteFunc(writeBufferToSeparateTiles) { uint32_t imagew = TIFFScanlineSize(out); tsize_t tilew = TIFFTileRowSize(out); int iskew = imagew - tilew; unsigned char *obuf = (unsigned char*) _TIFFmalloc(TIFFTileSize(out)); unsigned char *bufp = buf; uint32_t tl, tw; uint32_t row; if (obuf == NULL) return (FALSE); (void) TIFFGetField(out, TIFFTAG_TILELENGTH, &tl); (void) TIFFGetField(out, TIFFTAG_TILEWIDTH, &tw); for (row = 0; row < imagelength; row += tl) { uint32_t nrow = (row+tl > imagelength) ? imagelength-row : tl; uint32_t colb = 0; uint32_t col; for (col = 0; col < imagewidth; col += tw) { tsample_t s; for (s = 0; s < spp; s++) { /* * Tile is clipped horizontally. Calculate * visible portion and skewing factors. */ if (colb + tilew > imagew) { uint32_t width = imagew - colb; int oskew = tilew - width; cpContigBufToSeparateBuf(obuf, bufp + colb + s, nrow, width, oskew/spp, oskew + imagew, spp); } else cpContigBufToSeparateBuf(obuf, bufp + colb + s, nrow, tilewidth, 0, iskew, spp); if (TIFFWriteTile(out, obuf, col, row, 0, s) < 0) { _TIFFfree(obuf); return (FALSE); } } colb += tilew; } bufp += nrow * imagew; } _TIFFfree(obuf); return (TRUE); } /* * Contig strips -> contig tiles. */ DECLAREcpFunc(cpContigStrips2ContigTiles) { return cpImage(in, out, readContigStripsIntoBuffer, writeBufferToContigTiles, imagelength, imagewidth, spp); } /* * Contig strips -> separate tiles. */ DECLAREcpFunc(cpContigStrips2SeparateTiles) { return cpImage(in, out, readContigStripsIntoBuffer, writeBufferToSeparateTiles, imagelength, imagewidth, spp); } /* * Separate strips -> contig tiles. */ DECLAREcpFunc(cpSeparateStrips2ContigTiles) { return cpImage(in, out, readSeparateStripsIntoBuffer, writeBufferToContigTiles, imagelength, imagewidth, spp); } /* * Separate strips -> separate tiles. */ DECLAREcpFunc(cpSeparateStrips2SeparateTiles) { return cpImage(in, out, readSeparateStripsIntoBuffer, writeBufferToSeparateTiles, imagelength, imagewidth, spp); } /* * Contig strips -> contig tiles. */ DECLAREcpFunc(cpContigTiles2ContigTiles) { return cpImage(in, out, readContigTilesIntoBuffer, writeBufferToContigTiles, imagelength, imagewidth, spp); } /* * Contig tiles -> separate tiles. */ DECLAREcpFunc(cpContigTiles2SeparateTiles) { return cpImage(in, out, readContigTilesIntoBuffer, writeBufferToSeparateTiles, imagelength, imagewidth, spp); } /* * Separate tiles -> contig tiles. */ DECLAREcpFunc(cpSeparateTiles2ContigTiles) { return cpImage(in, out, readSeparateTilesIntoBuffer, writeBufferToContigTiles, imagelength, imagewidth, spp); } /* * Separate tiles -> separate tiles (tile dimension change). */ DECLAREcpFunc(cpSeparateTiles2SeparateTiles) { return cpImage(in, out, readSeparateTilesIntoBuffer, writeBufferToSeparateTiles, imagelength, imagewidth, spp); } /* * Contig tiles -> contig tiles (tile dimension change). */ DECLAREcpFunc(cpContigTiles2ContigStrips) { return cpImage(in, out, readContigTilesIntoBuffer, writeBufferToContigStrips, imagelength, imagewidth, spp); } /* * Contig tiles -> separate strips. */ DECLAREcpFunc(cpContigTiles2SeparateStrips) { return cpImage(in, out, readContigTilesIntoBuffer, writeBufferToSeparateStrips, imagelength, imagewidth, spp); } /* * Separate tiles -> contig strips. */ DECLAREcpFunc(cpSeparateTiles2ContigStrips) { return cpImage(in, out, readSeparateTilesIntoBuffer, writeBufferToContigStrips, imagelength, imagewidth, spp); } /* * Separate tiles -> separate strips. */ DECLAREcpFunc(cpSeparateTiles2SeparateStrips) { return cpImage(in, out, readSeparateTilesIntoBuffer, writeBufferToSeparateStrips, imagelength, imagewidth, spp); } /* * Select the appropriate copy function to use. */ static copyFunc pickCopyFunc(TIFF* in, TIFF* out, uint16_t bitspersample, uint16_t samplesperpixel) { uint16_t shortv; uint32_t w, l, tw, tl; int bychunk; (void) TIFFGetField(in, TIFFTAG_PLANARCONFIG, &shortv); if (shortv != config && bitspersample != 8 && samplesperpixel > 1) { fprintf(stderr, "%s: Can not handle different planar configuration w/ bits/sample != 8\n", TIFFFileName(in)); return (NULL); } TIFFGetField(in, TIFFTAG_IMAGEWIDTH, &w); TIFFGetField(in, TIFFTAG_IMAGELENGTH, &l); if (TIFFIsTiled(out)) { if (!TIFFGetField(in, TIFFTAG_TILEWIDTH, &tw)) tw = w; if (!TIFFGetField(in, TIFFTAG_TILELENGTH, &tl)) tl = l; bychunk = (tw == tilewidth && tl == tilelength); } else if (TIFFIsTiled(in)) { TIFFGetField(in, TIFFTAG_TILEWIDTH, &tw); TIFFGetField(in, TIFFTAG_TILELENGTH, &tl); bychunk = (tw == w && tl == rowsperstrip); } else { uint32_t irps = (uint32_t) -1L; TIFFGetField(in, TIFFTAG_ROWSPERSTRIP, &irps); bychunk = (rowsperstrip == irps); } #define T 1 #define F 0 #define pack(a,b,c,d,e) ((long)(((a)<<11)|((b)<<3)|((c)<<2)|((d)<<1)|(e))) switch(pack(shortv,config,TIFFIsTiled(in),TIFFIsTiled(out),bychunk)) { /* Strips -> Tiles */ case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_CONTIG, F,T,F): case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_CONTIG, F,T,T): return cpContigStrips2ContigTiles; case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_SEPARATE, F,T,F): case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_SEPARATE, F,T,T): return cpContigStrips2SeparateTiles; case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_CONTIG, F,T,F): case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_CONTIG, F,T,T): return cpSeparateStrips2ContigTiles; case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_SEPARATE, F,T,F): case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_SEPARATE, F,T,T): return cpSeparateStrips2SeparateTiles; /* Tiles -> Tiles */ case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_CONTIG, T,T,F): case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_CONTIG, T,T,T): return cpContigTiles2ContigTiles; case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_SEPARATE, T,T,F): case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_SEPARATE, T,T,T): return cpContigTiles2SeparateTiles; case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_CONTIG, T,T,F): case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_CONTIG, T,T,T): return cpSeparateTiles2ContigTiles; case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_SEPARATE, T,T,F): case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_SEPARATE, T,T,T): return cpSeparateTiles2SeparateTiles; /* Tiles -> Strips */ case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_CONTIG, T,F,F): case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_CONTIG, T,F,T): return cpContigTiles2ContigStrips; case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_SEPARATE, T,F,F): case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_SEPARATE, T,F,T): return cpContigTiles2SeparateStrips; case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_CONTIG, T,F,F): case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_CONTIG, T,F,T): return cpSeparateTiles2ContigStrips; case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_SEPARATE, T,F,F): case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_SEPARATE, T,F,T): return cpSeparateTiles2SeparateStrips; /* Strips -> Strips */ case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_CONTIG, F,F,F): if( convert_8_to_4 ) return cpContig2ContigByRow_8_to_4; else return cpContig2ContigByRow; case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_CONTIG, F,F,T): if( convert_8_to_4 ) return cpContig2ContigByRow_8_to_4; else return cpDecodedStrips; case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_SEPARATE, F,F,F): case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_SEPARATE, F,F,T): return cpContig2SeparateByRow; case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_CONTIG, F,F,F): case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_CONTIG, F,F,T): return cpSeparate2ContigByRow; case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_SEPARATE, F,F,F): case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_SEPARATE, F,F,T): return cpSeparate2SeparateByRow; } #undef pack #undef F #undef T fprintf(stderr, "tiffcp: %s: Don't know how to copy/convert image.\n", TIFFFileName(in)); return (NULL); } libgeotiff-1.7.4/bin/applygeo.c0000664000175000017500000000474714622755317013344 00000000000000/* applygeo.c */ #include #include #include "geotiff.h" #include "xtiffio.h" static int InstallGeoTIFF(const char *geofile, const char *tiffile) { TIFF *tif = XTIFFOpen(tiffile, "r+"); /* TIFF-level descriptor */ if (!tif) { perror(tiffile); fprintf(stderr, "Cannot open TIFF file %s (does not exist or not a valid TIFF file)\n", tiffile); return(-1); } /* If we have existing geokeys, try to wipe them by writing a dummy geokey directory. (#2546) */ uint16_t *panVI = NULL; uint16_t nKeyCount; if( TIFFGetField( tif, TIFFTAG_GEOKEYDIRECTORY, &nKeyCount, &panVI ) ) { uint16_t anGKVersionInfo[4] = { 1, 1, 0, 0 }; double adfDummyDoubleParams[1] = { 0.0 }; TIFFSetField( tif, TIFFTAG_GEOKEYDIRECTORY, 4, anGKVersionInfo ); TIFFSetField( tif, TIFFTAG_GEODOUBLEPARAMS, 1, adfDummyDoubleParams ); TIFFSetField( tif, TIFFTAG_GEOASCIIPARAMS, "" ); } GTIF *gtif = GTIFNew(tif); /* GeoKey-level descriptor */ if (!gtif) { fprintf(stderr, "Internal error (GTIFNew)\n"); return(-2); } /* Read GeoTIFF projection information from geofile */ FILE *fp = fopen(geofile, "r"); if( fp == NULL ) { perror( geofile ); fprintf(stderr, "Cannot open projection definition file %s\n", geofile); return(-3); } if (!GTIFImport(gtif, 0, fp)) { fprintf(stderr,"Projection definition file is not valid (%s)\n", geofile); return(-4); } fclose(fp); /* Install GeoTIFF keys into the TIFF file */ GTIFWriteKeys(gtif); /* Clean up */ GTIFFree(gtif); TIFFRewriteDirectory(tif); XTIFFClose(tif); return(0); } int main(int argc, char *argv[]) { char *usage = "usage: %s file.geo file.tiff\n" "geo\tfile containing projection (eg. from listgeo)\n" "tiff\tTIFF file into which the projection is written\n"; if( argc != 3 ) { fprintf(stderr, usage, "applygeo"); exit(1); } char *prog = argv[0]; char *geofile = argv[1]; char *tiffile = argv[2]; if (!geofile || !tiffile) { fprintf(stderr, usage, prog); exit(1); } const int rc = InstallGeoTIFF(geofile, tiffile); if (rc) { fprintf(stderr, "%s: error %d applying projection from %s into TIFF %s\n", prog, rc, geofile, tiffile); exit(2); } return(0); } libgeotiff-1.7.4/bin/Makefile.am0000664000175000017500000000061014622755317013375 00000000000000 makegeo_SOURCES = makegeo.c geotifcp_SOURCES = geotifcp.c listgeo_SOURCES = listgeo.c applygeo_SOURCES = applygeo.c bin_PROGRAMS = geotifcp listgeo applygeo noinst_PROGRAMS = makegeo if TIFF_IS_CONFIG TIFF_CFLAGS = @TIFF_INC@ -DHAVE_TIFF=1 endif AM_CFLAGS = -I../ -I$(srcdir)/.. -I$(srcdir)/../libxtiff $(TIFF_CFLAGS) @PROJ_INCLUDE@ LDADD = ../libgeotiff.la EXTRA_DIST = getopt.c libgeotiff-1.7.4/bin/Makefile.in0000664000175000017500000005563214755113347013422 00000000000000# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2018 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ bin_PROGRAMS = geotifcp$(EXEEXT) listgeo$(EXEEXT) applygeo$(EXEEXT) noinst_PROGRAMS = makegeo$(EXEEXT) subdir = bin ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/m4/ax_prog_doxygen.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/geo_config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS) am_applygeo_OBJECTS = applygeo.$(OBJEXT) applygeo_OBJECTS = $(am_applygeo_OBJECTS) applygeo_LDADD = $(LDADD) applygeo_DEPENDENCIES = ../libgeotiff.la AM_V_lt = $(am__v_lt_@AM_V@) am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) am__v_lt_0 = --silent am__v_lt_1 = am_geotifcp_OBJECTS = geotifcp.$(OBJEXT) geotifcp_OBJECTS = $(am_geotifcp_OBJECTS) geotifcp_LDADD = $(LDADD) geotifcp_DEPENDENCIES = ../libgeotiff.la am_listgeo_OBJECTS = listgeo.$(OBJEXT) listgeo_OBJECTS = $(am_listgeo_OBJECTS) listgeo_LDADD = $(LDADD) listgeo_DEPENDENCIES = ../libgeotiff.la am_makegeo_OBJECTS = makegeo.$(OBJEXT) makegeo_OBJECTS = $(am_makegeo_OBJECTS) makegeo_LDADD = $(LDADD) makegeo_DEPENDENCIES = ../libgeotiff.la AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__maybe_remake_depfiles = depfiles am__depfiles_remade = ./$(DEPDIR)/applygeo.Po ./$(DEPDIR)/geotifcp.Po \ ./$(DEPDIR)/listgeo.Po ./$(DEPDIR)/makegeo.Po am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) AM_V_CC = $(am__v_CC_@AM_V@) am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) am__v_CC_0 = @echo " CC " $@; am__v_CC_1 = CCLD = $(CC) LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_CCLD = $(am__v_CCLD_@AM_V@) am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) am__v_CCLD_0 = @echo " CCLD " $@; am__v_CCLD_1 = SOURCES = $(applygeo_SOURCES) $(geotifcp_SOURCES) $(listgeo_SOURCES) \ $(makegeo_SOURCES) DIST_SOURCES = $(applygeo_SOURCES) $(geotifcp_SOURCES) \ $(listgeo_SOURCES) $(makegeo_SOURCES) am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_DX_CURRENT_FEATURE = @DX_FLAG_DX_CURRENT_FEATURE@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ JPEG_INC = @JPEG_INC@ JPEG_PREFIX = @JPEG_PREFIX@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBGEOTIFF_MAJOR_VERSION = @LIBGEOTIFF_MAJOR_VERSION@ LIBGEOTIFF_MINOR_VERSION = @LIBGEOTIFF_MINOR_VERSION@ LIBGEOTIFF_PATCH_VERSION = @LIBGEOTIFF_PATCH_VERSION@ LIBGEOTIFF_REV_VERSION = @LIBGEOTIFF_REV_VERSION@ LIBGEOTIFF_STRING_VERSION = @LIBGEOTIFF_STRING_VERSION@ LIBGEOTIFF_VERSION = @LIBGEOTIFF_VERSION@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTIFF_CFLAGS = @LIBTIFF_CFLAGS@ LIBTIFF_LIBS = @LIBTIFF_LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ NOUNDEFINED = @NOUNDEFINED@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ PROJ_CFLAGS = @PROJ_CFLAGS@ PROJ_INCLUDE = @PROJ_INCLUDE@ PROJ_LIBS = @PROJ_LIBS@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ TIFF_INC = @TIFF_INC@ TIFF_PREFIX = @TIFF_PREFIX@ VERSION = @VERSION@ ZIP_INC = @ZIP_INC@ ZIP_PREFIX = @ZIP_PREFIX@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ makegeo_SOURCES = makegeo.c geotifcp_SOURCES = geotifcp.c listgeo_SOURCES = listgeo.c applygeo_SOURCES = applygeo.c @TIFF_IS_CONFIG_TRUE@TIFF_CFLAGS = @TIFF_INC@ -DHAVE_TIFF=1 AM_CFLAGS = -I../ -I$(srcdir)/.. -I$(srcdir)/../libxtiff $(TIFF_CFLAGS) @PROJ_INCLUDE@ LDADD = ../libgeotiff.la EXTRA_DIST = getopt.c all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu bin/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu bin/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ fi; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p \ || test -f $$p1 \ ; then echo "$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n;h' \ -e 's|.*|.|' \ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) files[d] = files[d] " " $$1; \ else { print "f", $$3 "/" $$4, $$1; } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ } \ ; done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ -e 's/$$/$(EXEEXT)/' \ `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(bindir)" && rm -f $$files clean-binPROGRAMS: @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list clean-noinstPROGRAMS: @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list applygeo$(EXEEXT): $(applygeo_OBJECTS) $(applygeo_DEPENDENCIES) $(EXTRA_applygeo_DEPENDENCIES) @rm -f applygeo$(EXEEXT) $(AM_V_CCLD)$(LINK) $(applygeo_OBJECTS) $(applygeo_LDADD) $(LIBS) geotifcp$(EXEEXT): $(geotifcp_OBJECTS) $(geotifcp_DEPENDENCIES) $(EXTRA_geotifcp_DEPENDENCIES) @rm -f geotifcp$(EXEEXT) $(AM_V_CCLD)$(LINK) $(geotifcp_OBJECTS) $(geotifcp_LDADD) $(LIBS) listgeo$(EXEEXT): $(listgeo_OBJECTS) $(listgeo_DEPENDENCIES) $(EXTRA_listgeo_DEPENDENCIES) @rm -f listgeo$(EXEEXT) $(AM_V_CCLD)$(LINK) $(listgeo_OBJECTS) $(listgeo_LDADD) $(LIBS) makegeo$(EXEEXT): $(makegeo_OBJECTS) $(makegeo_DEPENDENCIES) $(EXTRA_makegeo_DEPENDENCIES) @rm -f makegeo$(EXEEXT) $(AM_V_CCLD)$(LINK) $(makegeo_OBJECTS) $(makegeo_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/applygeo.Po@am__quote@ # am--include-marker @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/geotifcp.Po@am__quote@ # am--include-marker @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/listgeo.Po@am__quote@ # am--include-marker @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/makegeo.Po@am__quote@ # am--include-marker $(am__depfiles_remade): @$(MKDIR_P) $(@D) @echo '# dummy' >$@-t && $(am__mv) $@-t $@ am--depfiles: $(am__depfiles_remade) .c.o: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< .c.obj: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-am TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-am CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-am cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(PROGRAMS) installdirs: for dir in "$(DESTDIR)$(bindir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-binPROGRAMS clean-generic clean-libtool \ clean-noinstPROGRAMS mostlyclean-am distclean: distclean-am -rm -f ./$(DEPDIR)/applygeo.Po -rm -f ./$(DEPDIR)/geotifcp.Po -rm -f ./$(DEPDIR)/listgeo.Po -rm -f ./$(DEPDIR)/makegeo.Po -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-binPROGRAMS install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f ./$(DEPDIR)/applygeo.Po -rm -f ./$(DEPDIR)/geotifcp.Po -rm -f ./$(DEPDIR)/listgeo.Po -rm -f ./$(DEPDIR)/makegeo.Po -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-binPROGRAMS .MAKE: install-am install-strip .PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \ clean-binPROGRAMS clean-generic clean-libtool \ clean-noinstPROGRAMS cscopelist-am ctags ctags-am distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-binPROGRAMS install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-am uninstall uninstall-am uninstall-binPROGRAMS .PRECIOUS: Makefile # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: libgeotiff-1.7.4/epsg_ellipse.inc0000664000175000017500000000323614020740032013722 00000000000000/* * GeoTIFF Rev. 0.2 Ellipsoids */ /* C database for Geotiff include files. */ /* the macro ValuePair() must be defined */ /* by the enclosing include file */ #ifdef INCLUDE_OLD_CODES #include old_ellipse.inc #endif /* OLD Codes */ ValuePair(Ellipse_Airy_1830, 7001) ValuePair(Ellipse_Airy_Modified_1849, 7002) ValuePair(Ellipse_Australian_National_Spheroid, 7003) ValuePair(Ellipse_Bessel_1841, 7004) ValuePair(Ellipse_Bessel_Modified, 7005) ValuePair(Ellipse_Bessel_Namibia, 7006) ValuePair(Ellipse_Clarke_1858, 7007) ValuePair(Ellipse_Clarke_1866, 7008) ValuePair(Ellipse_Clarke_1866_Michigan, 7009) ValuePair(Ellipse_Clarke_1880_Benoit, 7010) ValuePair(Ellipse_Clarke_1880_IGN, 7011) ValuePair(Ellipse_Clarke_1880_RGS, 7012) ValuePair(Ellipse_Clarke_1880_Arc, 7013) ValuePair(Ellipse_Clarke_1880_SGA_1922, 7014) ValuePair(Ellipse_Everest_1830_1937_Adjustment, 7015) ValuePair(Ellipse_Everest_1830_1967_Definition, 7016) ValuePair(Ellipse_Everest_1830_1975_Definition, 7017) ValuePair(Ellipse_Everest_1830_Modified, 7018) ValuePair(Ellipse_GRS_1980, 7019) ValuePair(Ellipse_Helmert_1906, 7020) ValuePair(Ellipse_Indonesian_National_Spheroid, 7021) ValuePair(Ellipse_International_1924, 7022) ValuePair(Ellipse_International_1967, 7023) ValuePair(Ellipse_Krassowsky_1940, 7024) ValuePair(Ellipse_NWL_9D, 7025) ValuePair(Ellipse_NWL_10D, 7026) ValuePair(Ellipse_Plessis_1817, 7027) ValuePair(Ellipse_Struve_1860, 7028) ValuePair(Ellipse_War_Office, 7029) ValuePair(Ellipse_WGS_84, 7030) ValuePair(Ellipse_GEM_10C, 7031) ValuePair(Ellipse_OSU86F, 7032) ValuePair(Ellipse_OSU91A, 7033) ValuePair(Ellipse_Clarke_1880, 7034) ValuePair(Ellipse_Sphere, 7035) /* end of list */ libgeotiff-1.7.4/epsg_units.inc0000664000175000017500000000171114622755317013447 00000000000000/* * Rev. 0.2 EPSG/POSC Units Database. */ #ifdef INCLUDE_OLD_CODES #include geo_units.inc #endif /* OLD Codes */ ValuePair(Linear_Meter, 9001) ValuePair(Linear_Foot, 9002) ValuePair(Linear_Foot_US_Survey, 9003) ValuePair(Linear_Foot_Modified_American, 9004) ValuePair(Linear_Foot_Clarke, 9005) ValuePair(Linear_Foot_Indian, 9006) ValuePair(Linear_Link, 9007) ValuePair(Linear_Link_Benoit, 9008) ValuePair(Linear_Link_Sears, 9009) ValuePair(Linear_Chain_Benoit, 9010) ValuePair(Linear_Chain_Sears, 9011) ValuePair(Linear_Yard_Sears, 9012) ValuePair(Linear_Yard_Indian, 9013) ValuePair(Linear_Fathom, 9014) ValuePair(Linear_Mile_International_Nautical, 9015) /* * Angular Units */ ValuePair(Angular_Radian, 9101) ValuePair(Angular_Degree, 9102) ValuePair(Angular_Arc_Minute, 9103) ValuePair(Angular_Arc_Second, 9104) ValuePair(Angular_Grad, 9105) ValuePair(Angular_Gon, 9106) ValuePair(Angular_DMS, 9107) ValuePair(Angular_DMS_Hemisphere, 9108) /* end of list */ libgeotiff-1.7.4/NEWS0000664000175000017500000001420114755113176011267 00000000000000libgeotiff 1.7.4 ---------------- * CMake modernization, automate release generation from tags and refactor CI (#115) - CMake: Bumps the minimum CMake version to 3.13 - CMake: Add BUILD_SHARED_LIBS matrix for ON and OFF using similar config for macos-latest, windows-latest, and ubuntu-latest - CMake: Modernize CMake configuration to prevent flag/feature leaking - CMake: Adds CPack configuration so `package_source` target is available for dist generation - CMake: Updates FindPROJ.cmake with GDAL's recent version - CMake: add BUILD_MAN and BUILD_DOC options - CMake: Windows PDB install with BUILD_SHARED_LIBS - CMake: Remove FindGeoTIFF.cmake - Removes 16 year old dead `makefile.mpw` - Removes 6 year old dead `makefile.vc` - CI: Generates release artifacts and attaches them to every build - CI: Creates a release and attaches release artifacts for every tag of the OSGeo/libgeotiff repository - CI: [Attests](https://github.com/actions/attest-build-provenance) the release artifacts if the `github.repository_owner == OSGeo` - CI: Remove Appveyor config * GTIFGetDefn(): add missing normalization of angular units to degree Contrary to what the documentation of GTIFDefn::ProjParm[] mentionned, we failed to normalize angular measures to degrees when reading them from projection parameters (ProjXXXXXGeoKey's) when ProjCoordTransGeoKey was present (but we did normalize them when reading them from the PROJ database when there were was only a EPSG PCS code) Relates to https://github.com/OSGeo/gdal/issues/10154 and https://github.com/OSGeo/gdal/pull/10158 * Fix build with GCC 15 (#131) libgeotiff 1.7.3 ---------------- * CMake: fix typo in CMAKE_INSTALL_BINDIR install target that affects location of geotiff.dll (#117) libgeotiff 1.7.2 ---------------- * GTIFGetDatumInfoEx(): handle dynamic datums * CMake: adopt GNUInstallDirs * CMake: export TIFF as a public dependency * Add XTIFFClientOpenExt() with re-entrant error callbacks * listgeo: add a -no_corners option to avoid printing corner coordinates which might be PROJ version sensitive (refs #81) * Fix test failures with PROJ 9.1.1 and 9.3 * Remove trailing spaces from many files. * Localize variables and add const when possible in a number of files * geo_normalize.c: sprintf --> snprintf * Add missing includes * Fix -Werror=calloc-transposed-args with gcc 14 * FindPROJ.cmake: proj_experimental;h -> proj_experimental.h * CMake: add a BUILD_SHARED_LIBS option, and make it default to ON * autoconf/CMake: add generation of libgeotiff.pc * Remove INSTALL and install-sh autoconf-generated files libgeotiff 1.7.1 ---------------- * geotiff.h: more precise signature for GTIFDirectoryInfo() * applygeo.c/geotifcp.c: use uint16/32_t instead of old libtiff non _t custom types * Bump CMake min to 3.0.0 and remove apparently unneeded cmake_policy() declarations * CMake: remove libjpeg and libz from linking of libgeotiff itself. * geo_config.h: prefix HAVE_xxx and restrict it to GEOTIFF_HAVE_STRINGS_H (fixes #61) * GTIFPrintDefn(): avoid potential nullptr deref. CID 1469240 * CMake: use variable for installation subdirectories, and make sure INTERFACE_INCLUDE_DIRECTORIES is exported (fixes #67) * ReadKey(): only allow reading a key with TIFFTagLocation=0 that has a count of 1 to avoid reading an illegal address (and crashing) when using GTIFKeyGet() or PrintKey() (fixes #66) * ReadKey(): add extra warning messages * CMake: avoid INTERFACE_LINK_LIBRARIES vs LINK_INTERFACE_LIBRARIES_DEBUG warning about TIFF * CMake: Fix dllexport * CMake: Revise exported cmake config wrt BUILD_SHARED_LIBS * CMake: Revise exported cmake config wrt dependencies * CMake: Respect _FIND_QUIETLY libgeotiff 1.7.0 ---------------- * Add CoordinateEpochGeoKey = 5120 of type DOUBLE to store coordinate epoch of tie points / geotransform matrix for dynamic CRS. See https://github.com/opengeospatial/geotiff/pull/99 * geo_normalize.h/c: rename variables to please codespell * GTIFGetGCSInfoEx(): use proj_crs_get_datum_forced() for PROJ >= 8 to avoid issues with datum ensembles (fixes #54) * GTIFGetGCSInfoEx(): remove dead code (GDAL Coverity CID 1432690) * geo_normalize.c: follow-up to e06625c4e5bcce9f9217d1d5a43dc6af73156283 to avoid look up of user-defined GeogGeodeticDatumGeoKey that cause PROJ warnings (fixes #41) libgeotiff 1.6.0 ---------------- New features: * Add support for OGC GeoTIFF 1.1 * Expose GTIFGetPCSInfoEx(), GTIFGetProjTRFInfoEx(), GTIFGetGCSInfoEx(), GTIFGetDatumInfoEx(), GTIFGetEllipsoidInfoEx(), GTIFGetPMInfoEx(), GTIFGetUOMLengthInfoEx() and GTIFGetUOMAngleInfoEx() so that users can specify their own PROJ context * Add GTIFKeyGetASCII(), GTIFKeyGetSHORT() and GTIFKeyGetDOUBLE() as safer variants of GTIFKeyGet() with type checking * autotools build: enable build in a separate tree from source (#37) (fixes #28) * Use pkg-config for libtiff detection Bug fixes: * GTIFDecToDMS(): fix rounding issue (refs #16) * geo_names.c: Silence warning in GetNameFromDatabase * cpl_serv.h: add parenthesis in macro definitions * Fix spelling errors * geo_normalize.c: set UOMLength from GeogLinearUnits (for geocentic CRS) (GDAL #1595) * testlistgeo: remove hardcoded path in test output (fixes https://github.com/OSGeo/libgeotiff/issues/16#issuecomment-502267406) * Adapt test script for PROJ 6.2 EPSG database (fixes #22) * Use unix EOL for cmake related files (fixes #14) * configure.ac: drop dead code * geo_normalize.c: avoid look up of user-defined geokeys that cause PROJ warnings (fixes GDAL #2321) * listgeo: fix corner coordinates for images with RasterPixelIsPoint (#36) libgeotiff 1.5.1 ---------------- * re-add #define SetCSVFilenameHook gtSetCSVFilenameHook for compatibility with GDAL 2.4.x libgeotiff 1.5.0 ---------------- * Require PROJ >= 6 dependency * Remove all CSV files used by geo_normalize API, since libgeotiff now relies on PROJ database for EPSG CRS definitions. * geo_normalize.c: SetGTParmIds(): use ProjStraightVertPoleLongGeoKey for CT_PolarStereographic * geo_normalize.c: report StdParallel1 for Mercator_2SP when a PCS code is used * geo_normalize.c: fix support for Laborde Oblique Mercator * listgeo: use PROJ database to display non-hardcoded values of a number of keys libgeotiff-1.7.4/geo_free.c0000664000175000017500000000345114622755317012516 00000000000000/********************************************************************** * * geo_free.c -- Public routines for GEOTIFF GeoKey access. * * Written By: Niles D. Ritter. * * copyright (c) 1995 Niles D. Ritter * * Permission granted to use this software, so long as this copyright * notice accompanies any products derived therefrom. * **********************************************************************/ #include "geotiff.h" /* public interface */ #include "geo_tiffp.h" /* external TIFF interface */ #include "geo_keyp.h" /* private interface */ #include "proj.h" /********************************************************************** * * Public Routines * **********************************************************************/ /** This function deallocates an existing GeoTIFF access handle previously created with GTIFNew(). If the handle was used to write GeoTIFF keys to the TIFF file, the GTIFWriteKeys() function should be used to flush results to the file before calling GTIFFree(). GTIFFree() should be called before XTIFFClose() is called on the corresponding TIFF file handle.

*/ void GTIFFree(GTIF* gtif) { if (!gtif) return; /* Free parameter arrays */ if (gtif->gt_double) _GTIFFree (gtif->gt_double); if (gtif->gt_short) _GTIFFree (gtif->gt_short); /* Free GeoKey arrays */ if (gtif->gt_keys) { for (int i = 0; i < MAX_KEYS; i++) { if (gtif->gt_keys[i].gk_type == TYPE_ASCII) { _GTIFFree (gtif->gt_keys[i].gk_data); } } _GTIFFree (gtif->gt_keys); } if (gtif->gt_keyindex) _GTIFFree (gtif->gt_keyindex); if (gtif->own_pj_context) { proj_context_destroy(gtif->pj_context); } _GTIFFree (gtif); } libgeotiff-1.7.4/cpl_serv.h0000664000175000017500000002055114622755317012565 00000000000000/****************************************************************************** * Copyright (c) 1998, Frank Warmerdam * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. ****************************************************************************** * * cpl_serv.h * * This include file derived and simplified from the GDAL Common Portability * Library. */ #ifndef CPL_SERV_H_INCLUDED #define CPL_SERV_H_INCLUDED /* ==================================================================== */ /* Standard include files. */ /* ==================================================================== */ #include "geo_config.h" #include #include #include #if defined(GEOTIFF_HAVE_STRINGS_H) && !defined(_WIN32) # include #endif #include /********************************************************************** * Do we want to build as a DLL on windows? **********************************************************************/ #if !defined(GTIF_DLL) # if defined(_WIN32) && defined(BUILD_AS_DLL) # define GTIF_DLL __declspec(dllexport) # else # define GTIF_DLL # endif #endif /* ==================================================================== */ /* Other standard services. */ /* ==================================================================== */ #ifdef __cplusplus # define CPL_C_START extern "C" { # define CPL_C_END } #else # define CPL_C_START # define CPL_C_END #endif #ifndef NULL # define NULL 0 #endif #ifndef FALSE # define FALSE 0 #endif #ifndef TRUE # define TRUE 1 #endif #ifndef MAX # define MIN(a,b) (((a)<(b)) ? (a) : (b)) # define MAX(a,b) (((a)>(b)) ? (a) : (b)) #endif #ifndef NULL #define NULL 0 #endif #ifndef ABS # define ABS(x) (((x)<0) ? (-1*(x)) : (x)) #endif #ifndef EQUAL #if defined(_WIN32) && !defined(__CYGWIN__) # if (_MSC_FULL_VER >= 15000000) # define EQUALN(a,b,n) (_strnicmp(a,b,n)==0) # define EQUAL(a,b) (_stricmp(a,b)==0) # else # define EQUALN(a,b,n) (strnicmp(a,b,n)==0) # define EQUAL(a,b) (stricmp(a,b)==0) # endif #else # define EQUALN(a,b,n) (strncasecmp(a,b,n)==0) # define EQUAL(a,b) (strcasecmp(a,b)==0) #endif #endif /* ==================================================================== */ /* VSI Services (just map directly onto Standard C services. */ /* ==================================================================== */ #define VSIFOpen fopen #define VSIFClose fclose #define VSIFEof feof #define VSIFPrintf fprintf #define VSIFPuts fputs #define VSIFPutc fputc #define VSIFGets fgets #define VSIRewind rewind #define VSIFSeek fseek #define VSIFTell ftell #define VSIFRead fread #ifndef notdef #define VSICalloc(x,y) _GTIFcalloc((x)*(y)) #define VSIMalloc _GTIFcalloc #define VSIFree _GTIFFree #define VSIRealloc _GTIFrealloc #else #define VSICalloc(x,y) (((char *) _GTIFcalloc((x)*(y)+4)) + 4) #define VSIMalloc(x) (((char *) _GTIFcalloc((x)+4)) + 4) #define VSIFree(x) _GTIFFree(((char *) (x)) - 4) #define VSIRealloc(p,n) (((char *) _GTIFrealloc(((char *)(p))-4,(n)+4)) + 4) #endif #if !defined(GTIFAtof) # define GTIFAtof atof #endif /* -------------------------------------------------------------------- */ /* Safe malloc() API. Thin cover over VSI functions with fatal */ /* error reporting if memory allocation fails. */ /* -------------------------------------------------------------------- */ CPL_C_START #define CPLMalloc gtCPLMalloc #define CPLCalloc gtCPLCalloc #define CPLRealloc gtCPLRealloc #define CPLStrdup gtCPLStrdup void GTIF_DLL *CPLMalloc( int ); void GTIF_DLL *CPLCalloc( int, int ); void GTIF_DLL *CPLRealloc( void *, int ); char GTIF_DLL *CPLStrdup( const char * ); #define CPLFree(x) { if( x != NULL ) VSIFree(x); } /* -------------------------------------------------------------------- */ /* Locale insensitive string to float conversion. */ /* -------------------------------------------------------------------- */ /*double GTIFAtof(const char *nptr); */ double GTIFStrtod(const char *nptr, char **endptr); /* -------------------------------------------------------------------- */ /* Read a line from a text file, and strip of CR/LF. */ /* -------------------------------------------------------------------- */ #define CPLReadLine gtCPLReadLine const char GTIF_DLL *CPLReadLine( FILE * ); /*===================================================================== Error handling functions (cpl_error.c) =====================================================================*/ typedef enum { CE_None = 0, CE_Log = 1, CE_Warning = 2, CE_Failure = 3, CE_Fatal = 4 } CPLErr; #define CPLError gtCPLError #define CPLErrorReset gtCPLErrorReset #define CPLGetLastErrorNo gtCPLGetLastErrorNo #define CPLGetLastErrorMsg gtCPLGetLastErrorMsg #define CPLSetErrorHandler gtCPLSetErrorHandler #define _CPLAssert gt_CPLAssert void GTIF_DLL CPLError(CPLErr eErrClass, int err_no, const char *fmt, ...); void GTIF_DLL CPLErrorReset(); int GTIF_DLL CPLGetLastErrorNo(); const char GTIF_DLL * CPLGetLastErrorMsg(); void GTIF_DLL CPLSetErrorHandler(void(*pfnErrorHandler)(CPLErr,int, const char *)); void GTIF_DLL _CPLAssert( const char *, const char *, int ); #ifdef DEBUG # define CPLAssert(expr) ((expr) ? (void)(0) : _CPLAssert(#expr,__FILE__,__LINE__)) #else # define CPLAssert(expr) #endif CPL_C_END /* ==================================================================== */ /* Well known error codes. */ /* ==================================================================== */ #define CPLE_AppDefined 1 #define CPLE_OutOfMemory 2 #define CPLE_FileIO 3 #define CPLE_OpenFailed 4 #define CPLE_IllegalArg 5 #define CPLE_NotSupported 6 #define CPLE_AssertionFailed 7 #define CPLE_NoWriteAccess 8 /*===================================================================== Stringlist functions (strlist.c) =====================================================================*/ CPL_C_START #define CSLAddString gtCSLAddString #define CSLCount gtCSLCount #define CSLGetField gtCSLGetField #define CSLDestroy gtCSLDestroy #define CSLDuplicate gtCSLDuplicate #define CSLTokenizeString gtCSLTokenizeString #define CSLTokenizeStringComplex gtCSLTokenizeStringComplex char GTIF_DLL **CSLAddString(char **papszStrList, const char *pszNewString); int GTIF_DLL CSLCount(char **papszStrList); const char GTIF_DLL *CSLGetField( char **, int ); void GTIF_DLL CSLDestroy(char **papszStrList); char GTIF_DLL **CSLDuplicate(char **papszStrList); char GTIF_DLL **CSLTokenizeString(const char *pszString ); char GTIF_DLL **CSLTokenizeStringComplex(const char *pszString, const char *pszDelimiter, int bHonourStrings, int bAllowEmptyTokens ); /* * The following functions were used up to libgeotiff 1.4.X series, but * are now no-operation, since there is no longer any CSV use in libgeotiff. */ #define SetCSVFilenameHook gtSetCSVFilenameHook void GTIF_DLL SetCSVFilenameHook( const char *(*CSVFileOverride)(const char *) ); CPL_C_END #endif /* ndef CPL_SERV_H_INCLUDED */ libgeotiff-1.7.4/geo_normalize.h0000664000175000017500000002447614632634101013600 00000000000000/****************************************************************************** * $Id$ * * Project: libgeotiff * Purpose: Include file related to geo_normalize.c containing Code to * normalize PCS and other composite codes in a GeoTIFF file. * Author: Frank Warmerdam, warmerda@home.com * ****************************************************************************** * Copyright (c) 1999, Frank Warmerdam * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. *****************************************************************************/ #ifndef GEO_NORMALIZE_H_INCLUDED #define GEO_NORMALIZE_H_INCLUDED #include #include "geotiff.h" #ifdef __cplusplus extern "C" { #endif /** * \file geo_normalize.h * * Include file for extended projection definition normalization api. */ #define MAX_GTIF_PROJPARMS 10 /** * Holds a definition of a coordinate system in normalized form. */ typedef struct { /** From GTModelTypeGeoKey tag. Can have the values ModelTypeGeographic or ModelTypeProjected. */ short Model; /** From ProjectedCSTypeGeoKey tag. For example PCS_NAD27_UTM_zone_3N.*/ short PCS; /** From GeographicTypeGeoKey tag. For example GCS_WGS_84 or GCS_Voirol_1875_Paris. Includes datum and prime meridian value. */ short GCS; /** From ProjLinearUnitsGeoKey if found, or from GeogLinearUnitsGeoKey otherwise. For example Linear_Meter. */ short UOMLength; /** One UOMLength = UOMLengthInMeters meters. */ double UOMLengthInMeters; /** The angular units of the GCS. */ short UOMAngle; /** One UOMAngle = UOMLengthInDegrees degrees. */ double UOMAngleInDegrees; /** Datum from GeogGeodeticDatumGeoKey tag. For example Datum_WGS84 */ short Datum; /** Prime meridian from GeogPrimeMeridianGeoKey. For example PM_Greenwich or PM_Paris. */ short PM; /** Decimal degrees of longitude between this prime meridian and Greenwich. Prime meridians to the west of Greenwich are negative. */ double PMLongToGreenwich; /** Ellipsoid identifier from GeogELlipsoidGeoKey. For example Ellipse_Clarke_1866. */ short Ellipsoid; /** The length of the semi major ellipse axis in meters. */ double SemiMajor; /** The length of the semi minor ellipse axis in meters. */ double SemiMinor; /* This #if is primary intended to maintain binary compatibility with older versions of libgeotiff for MrSID binaries (for example). */ #if !defined(GEO_NORMALIZE_DISABLE_TOWGS84) /** TOWGS84 transformation values (0/3/7) */ short TOWGS84Count; /** TOWGS84 transformation values */ double TOWGS84[7]; #endif /* !defined(GEO_NORMALIZE_DISABLE_TOWGS84) */ /** Projection id from ProjectionGeoKey. For example Proj_UTM_11S. */ short ProjCode; /** EPSG identifier for underlying projection method. From the EPSG TRF_METHOD table. */ short Projection; /** GeoTIFF identifier for underlying projection method. While some of these values have corresponding values in EPSG (Projection field), others do not. For example CT_TransverseMercator. */ short CTProjection; /** Number of projection parameters in ProjParm and ProjParmId. */ int nParms; /** Projection parameter value. The identify of this parameter is established from the corresponding entry in ProjParmId. In GeoTIFF keys, the values of the projection parameters are expressed in the units of ProjLinearUnitsGeoKey (for linear measures) or GeogAngularUnitsGeoKey (for angular measures). However, the value returned in ProjParam[] will be normalized to meters or decimal degrees. Note: until libgeotiff 1.7.3, the conversion to degrees for angular measures was *not* done when ProjCoordTransGeoKey is present. */ double ProjParm[MAX_GTIF_PROJPARMS]; /** Projection parameter identifier. For example ProjFalseEastingGeoKey. The value will be 0 for unused table entries. */ int ProjParmId[MAX_GTIF_PROJPARMS]; /* geokey identifier, eg. ProjFalseEastingGeoKey*/ /** Special zone map system code (MapSys_UTM_South, MapSys_UTM_North, MapSys_State_Plane or KvUserDefined if none apply. */ int MapSys; /** UTM, or State Plane Zone number, zero if not known. */ int Zone; /** Do we have any definition at all? 0 if no geokeys found */ int DefnSet; } GTIFDefn; int GTIF_DLL GTIFGetPCSInfoEx( void* ctx, /* The void* should be a PJ_CONTEXT* */ int nPCSCode, char **ppszEPSGName, short *pnProjOp, short *pnUOMLengthCode, short *pnGeogCS ); int GTIF_DLL GTIFGetPCSInfo( int nPCSCode, char **ppszEPSGName, short *pnProjOp, short *pnUOMLengthCode, short *pnGeogCS ); int GTIF_DLL GTIFGetProjTRFInfoEx( void* ctx, /* The void* should be a PJ_CONTEXT* */ int nProjTRFCode, char **ppszProjTRFName, short * pnProjMethod, double * padfProjParams ); int GTIF_DLL GTIFGetProjTRFInfo( int nProjTRFCode, char ** ppszProjTRFName, short * pnProjMethod, double * padfProjParams ); int GTIF_DLL GTIFGetGCSInfoEx( void* ctx, /* The void* should be a PJ_CONTEXT* */ int nGCSCode, char ** ppszName, short * pnDatum, short * pnPM, short *pnUOMAngle ); int GTIF_DLL GTIFGetGCSInfo( int nGCSCode, char **ppszName, short *pnDatum, short *pnPM, short *pnUOMAngle ); int GTIF_DLL GTIFGetDatumInfoEx( void* ctx, /* The void* should be a PJ_CONTEXT* */ int nDatumCode, char ** ppszName, short * pnEllipsoid ); int GTIF_DLL GTIFGetDatumInfo( int nDatumCode, char **ppszName, short * pnEllipsoid ); int GTIF_DLL GTIFGetEllipsoidInfoEx( void* ctx, /* The void* should be a PJ_CONTEXT* */ int nEllipseCode, char ** ppszName, double * pdfSemiMajor, double * pdfSemiMinor ); int GTIF_DLL GTIFGetEllipsoidInfo( int nEllipsoid, char ** ppszName, double * pdfSemiMajor, double * pdfSemiMinor ); int GTIF_DLL GTIFGetPMInfoEx( void* ctx, /* The void* should be a PJ_CONTEXT* */ int nPMCode, char ** ppszName, double *pdfOffset ); int GTIF_DLL GTIFGetPMInfo( int nPM, char **ppszName, double * pdfLongToGreenwich ); double GTIF_DLL GTIFAngleStringToDD( const char *pszAngle, int nUOMAngle ); int GTIF_DLL GTIFGetUOMLengthInfoEx( void* ctx, /* The void* should be a PJ_CONTEXT* */ int nUOMLengthCode, char **ppszUOMName, double * pdfInMeters ); int GTIF_DLL GTIFGetUOMLengthInfo( int nUOMLengthCode, char **ppszUOMName, double * pdfInMeters ); int GTIF_DLL GTIFGetUOMAngleInfoEx( void* ctx, /* The void* should be a PJ_CONTEXT* */ int nUOMAngleCode, char **ppszUOMName, double * pdfInDegrees ); int GTIF_DLL GTIFGetUOMAngleInfo( int nUOMAngleCode, char **ppszUOMName, double * pdfInDegrees ); double GTIF_DLL GTIFAngleToDD( double dfAngle, int nUOMAngle ); /* this should be used to free strings returned by GTIFGet... funcs */ void GTIF_DLL GTIFFreeMemory( char * ); /* The void* should be a PJ_CONTEXT* */ void GTIF_DLL GTIFAttachPROJContext( GTIF *psGTIF, void* pjContext ); void GTIF_DLL *GTIFGetPROJContext( GTIF *psGTIF, int instantiateIfNeeded, int* out_gtif_own_pj_context ); int GTIF_DLL GTIFGetDefn( GTIF *psGTIF, GTIFDefn * psDefn ); void GTIF_DLL GTIFPrintDefn( GTIFDefn *, FILE * ); void GTIF_DLL GTIFPrintDefnEx( GTIF *psGTIF, GTIFDefn *, FILE * ); GTIFDefn GTIF_DLL *GTIFAllocDefn( void ); void GTIF_DLL GTIFFreeDefn( GTIFDefn * ); const char GTIF_DLL *GTIFDecToDMS( double, const char *, int ); /* * These are useful for recognising UTM and State Plane. */ #define MapSys_UTM_North -9001 #define MapSys_UTM_South -9002 #define MapSys_State_Plane_27 -9003 #define MapSys_State_Plane_83 -9004 int GTIF_DLL GTIFMapSysToPCS( int MapSys, int Datum, int nZone ); int GTIF_DLL GTIFMapSysToProj( int MapSys, int nZone ); int GTIF_DLL GTIFPCSToMapSys( int PCSCode, int * pDatum, int * pZone ); int GTIF_DLL GTIFProjToMapSys( int ProjCode, int * pZone ); /* * These are only useful if using libgeotiff with libproj (PROJ.4+). */ char GTIF_DLL *GTIFGetProj4Defn( GTIFDefn * ); int GTIF_DLL GTIFProj4ToLatLong( GTIFDefn *, int, double *, double * ); int GTIF_DLL GTIFProj4FromLatLong( GTIFDefn *, int, double *, double * ); int GTIF_DLL GTIFSetFromProj4( GTIF *gtif, const char *proj4 ); /* * The following functions were used up to libgeotiff 1.4.X series, but * are now no-operation, since there is no longer any CSV use in libgeotiff. */ void GTIF_DLL GTIFDeaccessCSV( void ); #ifdef __cplusplus } #endif #endif /* ndef GEO_NORMALIZE_H_INCLUDED */ libgeotiff-1.7.4/geo_tiffp.h0000664000175000017500000000726314622755317012717 00000000000000/********************************************************************** * * geo_tiffp.h - Private interface for TIFF tag parsing. * * Written by: Niles D. Ritter * * This interface file encapsulates the interface to external TIFF * file-io routines and definitions. The current configuration * assumes that the "libtiff" module is used, but if you have your * own TIFF reader, you may replace the definitions with your own * here, and replace the implementations in geo_tiffp.c. No other * modules have any explicit dependence on external TIFF modules. * * copyright (c) 1995 Niles D. Ritter * * Permission granted to use this software, so long as this copyright * notice accompanies any products derived therefrom. **********************************************************************/ #ifndef LIBGEOTIFF_GEO_TIFFP_H_ #define LIBGEOTIFF_GEO_TIFFP_H_ /********************************************************************** * * Private includes * * If you are not using libtiff and XTIFF, replace this include file * with the appropriate one for your own TIFF parsing routines. * **********************************************************************/ #include "geotiff.h" #include "xtiffio.h" #include "cpl_serv.h" /* * dblparam_t is the type that a double precision * floating point value will have on the parameter * stack (when coerced by the compiler). You shouldn't * have to change this. */ #ifdef applec typedef extended dblparam_t; #else typedef double dblparam_t; #endif /********************************************************************** * * Private defines * * If you are not using "libtiff"/LIBXTIFF, replace these definitions * with the appropriate definitions to access the geo-tags * **********************************************************************/ typedef unsigned short pinfo_t; /* SHORT ProjectionInfo tag type */ typedef TIFF tiff_t; /* TIFF file descriptor */ typedef tdata_t gdata_t; /* pointer to data */ typedef tsize_t gsize_t; /* data allocation size */ #define GTIFF_GEOKEYDIRECTORY TIFFTAG_GEOKEYDIRECTORY /* from xtiffio.h */ #define GTIFF_DOUBLEPARAMS TIFFTAG_GEODOUBLEPARAMS #define GTIFF_ASCIIPARAMS TIFFTAG_GEOASCIIPARAMS #define GTIFF_PIXELSCALE TIFFTAG_GEOPIXELSCALE #define GTIFF_TRANSMATRIX TIFFTAG_GEOTRANSMATRIX #define GTIFF_INTERGRAPH_MATRIX TIFFTAG_INTERGRAPH_MATRIX #define GTIFF_TIEPOINTS TIFFTAG_GEOTIEPOINTS #define GTIFF_LOCAL 0 #if defined(__cplusplus) extern "C" { #endif /* * Method function pointer types */ typedef int (*GTGetFunction) (tiff_t *tif, pinfo_t tag, int *count, void *value ); typedef int (*GTSetFunction) (tiff_t *tif, pinfo_t tag, int count, void *value ); typedef tagtype_t (*GTTypeFunction) (tiff_t *tif, pinfo_t tag); typedef struct _TIFFMethod { GTGetFunction get; GTSetFunction set; GTTypeFunction type; } TIFFMethod_t; /********************************************************************** * * Protected Function Declarations * * These routines are exposed implementations, and should not * be used by external GEOTIFF client programs. * **********************************************************************/ extern gsize_t _gtiff_size[]; /* TIFF data sizes */ extern void GTIF_DLL _GTIFSetDefaultTIFF(TIFFMethod *method); extern gdata_t GTIF_DLL _GTIFcalloc(gsize_t); extern gdata_t GTIF_DLL _GTIFrealloc(gdata_t,gsize_t); extern void GTIF_DLL _GTIFFree(gdata_t data); extern void GTIF_DLL _GTIFmemcpy(gdata_t out,gdata_t in,gsize_t size); #if defined(__cplusplus) } #endif #endif /* LIBGEOTIFF_GEO_TIFFP_H_ */ libgeotiff-1.7.4/geo_trans.c0000664000175000017500000002605614622755317012732 00000000000000/****************************************************************************** * $Id$ * * Project: libgeotiff * Purpose: Code to abstract translation between pixel/line and PCS * coordinates. * Author: Frank Warmerdam, warmerda@home.com * ****************************************************************************** * Copyright (c) 1999, Frank Warmerdam * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. *****************************************************************************/ #include #include #include "geotiff.h" #include "geo_tiffp.h" /* external TIFF interface */ #include "geo_keyp.h" /* private interface */ #include "geokeys.h" /************************************************************************/ /* inv_geotransform() */ /* */ /* Invert a 6 term geotransform style matrix. */ /************************************************************************/ static int inv_geotransform( double *gt_in, double *gt_out ) { /* we assume a 3rd row that is [0 0 1] */ /* Compute determinate */ const double det = gt_in[0] * gt_in[4] - gt_in[1] * gt_in[3]; if( fabs(det) < 0.000000000000001 ) return 0; const double inv_det = 1.0 / det; /* compute adjoint, and divide by determinate */ gt_out[0] = gt_in[4] * inv_det; gt_out[3] = -gt_in[3] * inv_det; gt_out[1] = -gt_in[1] * inv_det; gt_out[4] = gt_in[0] * inv_det; gt_out[2] = ( gt_in[1] * gt_in[5] - gt_in[2] * gt_in[4]) * inv_det; gt_out[5] = (-gt_in[0] * gt_in[5] + gt_in[2] * gt_in[3]) * inv_det; return 1; } /************************************************************************/ /* GTIFTiepointTranslate() */ /************************************************************************/ static int GTIFTiepointTranslate( int gcp_count, double * gcps_in, double * gcps_out, double x_in, double y_in, double *x_out, double *y_out ) { (void) gcp_count; (void) gcps_in; (void) gcps_out; (void) x_in; (void) y_in; (void) x_out; (void) y_out; /* I would appreciate a _brief_ block of code for doing second order polynomial regression here! */ return FALSE; } /************************************************************************/ /* GTIFImageToPCS() */ /************************************************************************/ /** * Translate a pixel/line coordinate to projection coordinates. * * At this time this function does not support image to PCS translations for * tiepoints-only definitions, only pixelscale and transformation matrix * formulations. * * @param gtif The handle from GTIFNew() indicating the target file. * @param x A pointer to the double containing the pixel offset on input, * and into which the easting/longitude will be put on completion. * @param y A pointer to the double containing the line offset on input, * and into which the northing/latitude will be put on completion. * * @return TRUE if the transformation succeeds, or FALSE if it fails. It may * fail if the file doesn't have properly setup transformation information, * or it is in a form unsupported by this function. */ int GTIFImageToPCS( GTIF *gtif, double *x, double *y ) { tiff_t *tif=gtif->gt_tif; int tiepoint_count; double *tiepoints = 0; if (!(gtif->gt_methods.get)(tif, GTIFF_TIEPOINTS, &tiepoint_count, &tiepoints )) tiepoint_count = 0; int count; double *pixel_scale = 0; if (!(gtif->gt_methods.get)(tif, GTIFF_PIXELSCALE, &count, &pixel_scale )) count = 0; int transform_count; double *transform = 0; if (!(gtif->gt_methods.get)(tif, GTIFF_TRANSMATRIX, &transform_count, &transform )) transform_count = 0; /* -------------------------------------------------------------------- */ /* If the pixelscale count is zero, but we have tiepoints use */ /* the tiepoint based approach. */ /* -------------------------------------------------------------------- */ int res = FALSE; if( tiepoint_count > 6 && count == 0 ) { res = GTIFTiepointTranslate( tiepoint_count / 6, tiepoints, tiepoints + 3, *x, *y, x, y ); } /* -------------------------------------------------------------------- */ /* If we have a transformation matrix, use it. */ /* -------------------------------------------------------------------- */ else if( transform_count == 16 ) { const double x_in = *x; const double y_in = *y; *x = x_in * transform[0] + y_in * transform[1] + transform[3]; *y = x_in * transform[4] + y_in * transform[5] + transform[7]; res = TRUE; } /* -------------------------------------------------------------------- */ /* For now we require one tie point, and a valid pixel scale. */ /* -------------------------------------------------------------------- */ else if( count < 3 || tiepoint_count < 6 ) { res = FALSE; } else { *x = (*x - tiepoints[0]) * pixel_scale[0] + tiepoints[3]; *y = (*y - tiepoints[1]) * (-1 * pixel_scale[1]) + tiepoints[4]; res = TRUE; } /* -------------------------------------------------------------------- */ /* Cleanup */ /* -------------------------------------------------------------------- */ if(tiepoints) _GTIFFree(tiepoints); if(pixel_scale) _GTIFFree(pixel_scale); if(transform) _GTIFFree(transform); return res; } /************************************************************************/ /* GTIFPCSToImage() */ /************************************************************************/ /** * Translate a projection coordinate to pixel/line coordinates. * * At this time this function does not support PCS to image translations for * tiepoints-only based definitions, only matrix and pixelscale/tiepoints * formulations are supposed. * * @param gtif The handle from GTIFNew() indicating the target file. * @param x A pointer to the double containing the pixel offset on input, * and into which the easting/longitude will be put on completion. * @param y A pointer to the double containing the line offset on input, * and into which the northing/latitude will be put on completion. * * @return TRUE if the transformation succeeds, or FALSE if it fails. It may * fail if the file doesn't have properly setup transformation information, * or it is in a form unsupported by this function. */ int GTIFPCSToImage( GTIF *gtif, double *x, double *y ) { tiff_t *tif=gtif->gt_tif; int result = FALSE; /* -------------------------------------------------------------------- */ /* Fetch tiepoints and pixel scale. */ /* -------------------------------------------------------------------- */ double *tiepoints = NULL; int tiepoint_count; if (!(gtif->gt_methods.get)(tif, GTIFF_TIEPOINTS, &tiepoint_count, &tiepoints )) tiepoint_count = 0; int count; double *pixel_scale = NULL; if (!(gtif->gt_methods.get)(tif, GTIFF_PIXELSCALE, &count, &pixel_scale )) count = 0; int transform_count = 0; double *transform = NULL; if (!(gtif->gt_methods.get)(tif, GTIFF_TRANSMATRIX, &transform_count, &transform )) transform_count = 0; /* -------------------------------------------------------------------- */ /* If the pixelscale count is zero, but we have tiepoints use */ /* the tiepoint based approach. */ /* -------------------------------------------------------------------- */ if( tiepoint_count > 6 && count == 0 ) { result = GTIFTiepointTranslate( tiepoint_count / 6, tiepoints + 3, tiepoints, *x, *y, x, y ); } /* -------------------------------------------------------------------- */ /* Handle matrix - convert to "geotransform" format, invert and */ /* apply. */ /* -------------------------------------------------------------------- */ else if( transform_count == 16 ) { const double x_in = *x; const double y_in = *y; double gt_in[6]; gt_in[0] = transform[0]; gt_in[1] = transform[1]; gt_in[2] = transform[3]; gt_in[3] = transform[4]; gt_in[4] = transform[5]; gt_in[5] = transform[7]; double gt_out[6]; if( !inv_geotransform( gt_in, gt_out ) ) result = FALSE; else { *x = x_in * gt_out[0] + y_in * gt_out[1] + gt_out[2]; *y = x_in * gt_out[3] + y_in * gt_out[4] + gt_out[5]; result = TRUE; } } /* -------------------------------------------------------------------- */ /* For now we require one tie point, and a valid pixel scale. */ /* -------------------------------------------------------------------- */ else if( count >= 3 && tiepoint_count >= 6 ) { *x = (*x - tiepoints[3]) / pixel_scale[0] + tiepoints[0]; *y = (*y - tiepoints[4]) / (-1 * pixel_scale[1]) + tiepoints[1]; result = TRUE; } /* -------------------------------------------------------------------- */ /* Cleanup. */ /* -------------------------------------------------------------------- */ if(tiepoints) _GTIFFree(tiepoints); if(pixel_scale) _GTIFFree(pixel_scale); if(transform) _GTIFFree(transform); return result; } libgeotiff-1.7.4/AUTHORS0000664000175000017500000000000014020740032011606 00000000000000libgeotiff-1.7.4/INSTALL0000644000175000017500000003661414623116630011623 00000000000000Installation Instructions ************************* Copyright (C) 1994-1996, 1999-2002, 2004-2016 Free Software Foundation, Inc. Copying and distribution of this file, with or without modification, are permitted in any medium without royalty provided the copyright notice and this notice are preserved. This file is offered as-is, without warranty of any kind. Basic Installation ================== Briefly, the shell command './configure && make && make install' should configure, build, and install this package. The following more-detailed instructions are generic; see the 'README' file for instructions specific to this package. Some packages provide this 'INSTALL' file but do not implement all of the features documented below. The lack of an optional feature in a given package is not necessarily a bug. More recommendations for GNU packages can be found in *note Makefile Conventions: (standards)Makefile Conventions. The 'configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a 'Makefile' in each directory of the package. It may also create one or more '.h' files containing system-dependent definitions. Finally, it creates a shell script 'config.status' that you can run in the future to recreate the current configuration, and a file 'config.log' containing compiler output (useful mainly for debugging 'configure'). It can also use an optional file (typically called 'config.cache' and enabled with '--cache-file=config.cache' or simply '-C') that saves the results of its tests to speed up reconfiguring. Caching is disabled by default to prevent problems with accidental use of stale cache files. If you need to do unusual things to compile the package, please try to figure out how 'configure' could check whether to do them, and mail diffs or instructions to the address given in the 'README' so they can be considered for the next release. If you are using the cache, and at some point 'config.cache' contains results you don't want to keep, you may remove or edit it. The file 'configure.ac' (or 'configure.in') is used to create 'configure' by a program called 'autoconf'. You need 'configure.ac' if you want to change it or regenerate 'configure' using a newer version of 'autoconf'. The simplest way to compile this package is: 1. 'cd' to the directory containing the package's source code and type './configure' to configure the package for your system. Running 'configure' might take a while. While running, it prints some messages telling which features it is checking for. 2. Type 'make' to compile the package. 3. Optionally, type 'make check' to run any self-tests that come with the package, generally using the just-built uninstalled binaries. 4. Type 'make install' to install the programs and any data files and documentation. When installing into a prefix owned by root, it is recommended that the package be configured and built as a regular user, and only the 'make install' phase executed with root privileges. 5. Optionally, type 'make installcheck' to repeat any self-tests, but this time using the binaries in their final installed location. This target does not install anything. Running this target as a regular user, particularly if the prior 'make install' required root privileges, verifies that the installation completed correctly. 6. You can remove the program binaries and object files from the source code directory by typing 'make clean'. To also remove the files that 'configure' created (so you can compile the package for a different kind of computer), type 'make distclean'. There is also a 'make maintainer-clean' target, but that is intended mainly for the package's developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution. 7. Often, you can also type 'make uninstall' to remove the installed files again. In practice, not all packages have tested that uninstallation works correctly, even though it is required by the GNU Coding Standards. 8. Some packages, particularly those that use Automake, provide 'make distcheck', which can by used by developers to test that all other targets like 'make install' and 'make uninstall' work correctly. This target is generally not run by end users. Compilers and Options ===================== Some systems require unusual options for compilation or linking that the 'configure' script does not know about. Run './configure --help' for details on some of the pertinent environment variables. You can give 'configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here is an example: ./configure CC=c99 CFLAGS=-g LIBS=-lposix *Note Defining Variables::, for more details. Compiling For Multiple Architectures ==================================== You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you can use GNU 'make'. 'cd' to the directory where you want the object files and executables to go and run the 'configure' script. 'configure' automatically checks for the source code in the directory that 'configure' is in and in '..'. This is known as a "VPATH" build. With a non-GNU 'make', it is safer to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use 'make distclean' before reconfiguring for another architecture. On MacOS X 10.5 and later systems, you can create libraries and executables that work on multiple system types--known as "fat" or "universal" binaries--by specifying multiple '-arch' options to the compiler but only a single '-arch' option to the preprocessor. Like this: ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ CPP="gcc -E" CXXCPP="g++ -E" This is not guaranteed to produce working output in all cases, you may have to build one architecture at a time and combine the results using the 'lipo' tool if you have problems. Installation Names ================== By default, 'make install' installs the package's commands under '/usr/local/bin', include files under '/usr/local/include', etc. You can specify an installation prefix other than '/usr/local' by giving 'configure' the option '--prefix=PREFIX', where PREFIX must be an absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you pass the option '--exec-prefix=PREFIX' to 'configure', the package uses PREFIX as the prefix for installing programs and libraries. Documentation and other data files still use the regular prefix. In addition, if you use an unusual directory layout you can give options like '--bindir=DIR' to specify different values for particular kinds of files. Run 'configure --help' for a list of the directories you can set and what kinds of files go in them. In general, the default for these options is expressed in terms of '${prefix}', so that specifying just '--prefix' will affect all of the other directory specifications that were not explicitly provided. The most portable way to affect installation locations is to pass the correct locations to 'configure'; however, many packages provide one or both of the following shortcuts of passing variable assignments to the 'make install' command line to change installation locations without having to reconfigure or recompile. The first method involves providing an override variable for each affected directory. For example, 'make install prefix=/alternate/directory' will choose an alternate location for all directory configuration variables that were expressed in terms of '${prefix}'. Any directories that were specified during 'configure', but not in terms of '${prefix}', must each be overridden at install time for the entire installation to be relocated. The approach of makefile variable overrides for each directory variable is required by the GNU Coding Standards, and ideally causes no recompilation. However, some platforms have known limitations with the semantics of shared libraries that end up requiring recompilation when using this method, particularly noticeable in packages that use GNU Libtool. The second method involves providing the 'DESTDIR' variable. For example, 'make install DESTDIR=/alternate/directory' will prepend '/alternate/directory' before all installation names. The approach of 'DESTDIR' overrides is not required by the GNU Coding Standards, and does not work on platforms that have drive letters. On the other hand, it does better at avoiding recompilation issues, and works well even when some directory options were not specified in terms of '${prefix}' at 'configure' time. Optional Features ================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving 'configure' the option '--program-prefix=PREFIX' or '--program-suffix=SUFFIX'. Some packages pay attention to '--enable-FEATURE' options to 'configure', where FEATURE indicates an optional part of the package. They may also pay attention to '--with-PACKAGE' options, where PACKAGE is something like 'gnu-as' or 'x' (for the X Window System). The 'README' should mention any '--enable-' and '--with-' options that the package recognizes. For packages that use the X Window System, 'configure' can usually find the X include and library files automatically, but if it doesn't, you can use the 'configure' options '--x-includes=DIR' and '--x-libraries=DIR' to specify their locations. Some packages offer the ability to configure how verbose the execution of 'make' will be. For these packages, running './configure --enable-silent-rules' sets the default to minimal output, which can be overridden with 'make V=1'; while running './configure --disable-silent-rules' sets the default to verbose, which can be overridden with 'make V=0'. Particular systems ================== On HP-UX, the default C compiler is not ANSI C compatible. If GNU CC is not installed, it is recommended to use the following options in order to use an ANSI C compiler: ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" and if that doesn't work, install pre-built binaries of GCC for HP-UX. HP-UX 'make' updates targets which have the same time stamps as their prerequisites, which makes it generally unusable when shipped generated files such as 'configure' are involved. Use GNU 'make' instead. On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot parse its '' header file. The option '-nodtk' can be used as a workaround. If GNU CC is not installed, it is therefore recommended to try ./configure CC="cc" and if that doesn't work, try ./configure CC="cc -nodtk" On Solaris, don't put '/usr/ucb' early in your 'PATH'. This directory contains several dysfunctional programs; working variants of these programs are available in '/usr/bin'. So, if you need '/usr/ucb' in your 'PATH', put it _after_ '/usr/bin'. On Haiku, software installed for all users goes in '/boot/common', not '/usr/local'. It is recommended to use the following options: ./configure --prefix=/boot/common Specifying the System Type ========================== There may be some features 'configure' cannot figure out automatically, but needs to determine by the type of machine the package will run on. Usually, assuming the package is built to be run on the _same_ architectures, 'configure' can figure that out, but if it prints a message saying it cannot guess the machine type, give it the '--build=TYPE' option. TYPE can either be a short name for the system type, such as 'sun4', or a canonical name which has the form: CPU-COMPANY-SYSTEM where SYSTEM can have one of these forms: OS KERNEL-OS See the file 'config.sub' for the possible values of each field. If 'config.sub' isn't included in this package, then this package doesn't need to know the machine type. If you are _building_ compiler tools for cross-compiling, you should use the option '--target=TYPE' to select the type of system they will produce code for. If you want to _use_ a cross compiler, that generates code for a platform different from the build platform, you should specify the "host" platform (i.e., that on which the generated programs will eventually be run) with '--host=TYPE'. Sharing Defaults ================ If you want to set default values for 'configure' scripts to share, you can create a site shell script called 'config.site' that gives default values for variables like 'CC', 'cache_file', and 'prefix'. 'configure' looks for 'PREFIX/share/config.site' if it exists, then 'PREFIX/etc/config.site' if it exists. Or, you can set the 'CONFIG_SITE' environment variable to the location of the site script. A warning: not all 'configure' scripts look for a site script. Defining Variables ================== Variables not defined in a site shell script can be set in the environment passed to 'configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set them in the 'configure' command line, using 'VAR=value'. For example: ./configure CC=/usr/local2/bin/gcc causes the specified 'gcc' to be used as the C compiler (unless it is overridden in the site shell script). Unfortunately, this technique does not work for 'CONFIG_SHELL' due to an Autoconf limitation. Until the limitation is lifted, you can use this workaround: CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash 'configure' Invocation ====================== 'configure' recognizes the following options to control how it operates. '--help' '-h' Print a summary of all of the options to 'configure', and exit. '--help=short' '--help=recursive' Print a summary of the options unique to this package's 'configure', and exit. The 'short' variant lists options used only in the top level, while the 'recursive' variant lists options also present in any nested packages. '--version' '-V' Print the version of Autoconf used to generate the 'configure' script, and exit. '--cache-file=FILE' Enable the cache: use and save the results of the tests in FILE, traditionally 'config.cache'. FILE defaults to '/dev/null' to disable caching. '--config-cache' '-C' Alias for '--cache-file=config.cache'. '--quiet' '--silent' '-q' Do not print messages saying which checks are being made. To suppress all normal output, redirect it to '/dev/null' (any error messages will still be shown). '--srcdir=DIR' Look for the package's source code in directory DIR. Usually 'configure' can determine that directory automatically. '--prefix=DIR' Use DIR as the installation prefix. *note Installation Names:: for more details, including other options available for fine-tuning the installation locations. '--no-create' '-n' Run the configure checks, but stop before creating any output files. 'configure' also accepts some other, not widely useful, options. Run 'configure --help' for more details. libgeotiff-1.7.4/README0000664000175000017500000001143214020740032011431 00000000000000About LIBGEOTIFF: ----------------- This library is designed to permit the extraction and parsing of the "GeoTIFF" Key directories, as well as definition and installation of GeoTIFF keys in new files. For more information about GeoTIFF specifications, projection codes and use, see the WWW web page at: http://geotiff.osgeo.org/ or the download archive at: http://download.osgeo.org/geotiff/ Mailing List ------------ To ask questions and to follow release announcements, subscribe at: https://lists.osgeo.org/mailman/listinfo/geotiff Use of LIBTIFF -------------- The default configuration assumes that the public-domain LIBTIFF package for reading and writing TIFF files has been installed, with the development kit (include files). The latest version of libtiff may be found at: http://www.simplesystems.org/libtiff/ For this build to work you must use libtiff version v3.6.0 alpha or newer. Use of PROJ ----------- PROJ 6 or later is a required dependency of libgeotiff 1.5 or later. The latest version of PROJ can be found at https://proj4.org/ Building LIBGEOTIFF: -------------------- Assuming that whatever TIFF library you use has been built, and installed may now build the rest of the geotiff library with: % cd libgeotiff % ./configure --with-proj=/contrib/proj-6 % make Common Configuration Issues: o If you want to alter the compiler used, set the CC environment variable before running configure. % setenv CC cc % rm config.status % ./configure % make clean % make o If you want to control the compiler files, set the CFLAGS environment variable. This can be used to override the default optimization/debug flags for instance. % setenv CFLAGS -O4 % rm config.status % ./configure % make clean % make o If you want to force use of a locally built libtiff that was never "installed" you can point to the directory like this: % rm config.status % ./configure --with-libtiff=/u/contrib/libtiff-3.6.0/libtiff % make clean % make o If you have installed libtiff in a location other than /usr, then you can point to the install tree like this: % rm config.status % ./configure --with-libtiff=/usr/local % make clean % make o The logic to build shared libraries is pretty weak, and is likely to only work on systems with the GNU tool chain (gcc, and ld) installed. On other systems you can try hacking on Makefile after running configure. It may be necessary to set the GEOTIFF_SO macro to "libgeotiff.1.2.x" as it is made empty by default on systems configure doesn't think can build shared libraries. Test Programs: There are two demonstration test programs "makegeo" and "listgeo" that create and list-out the GeoTIFF tags and keys associated with a small TIFF file, as well as a full-featured utility called "geotifcp". These will all be built in the bin/ directory as a matter of course, though may require modification if you are not using LIBTIFF, as they make explicit calls to LIBTIFF for opening the files and setting the tags. To run them simply call: % bin/makegeo % bin/listgeo newgeo.tif to generate and list an example GeoTIFF file. To see the "geotifcp" utility in action, first call: % bin/listgeo newgeo.tif > metadata.txt to create a GeoTIFF metadata file "metadata.txt", and then % bin/geotifcp -g metadata.txt newgeo.tif newer.tif to copy the TIFF file newgeo.tif to newer.tif, using the GeoTIFF metadata as stored in "metadata.txt". See "docs/manual.txt" for further uses of geotifcp. To convert a projection metafile, an ESRI world file, and a raw TIFF file into a GeoTIFF file do something like the following: % bin/tiffcp -g metadata.txt -e abc.tfw abc.tif geo_abc.tif Non-Standard Configuration: --------------------------- If you are using a TIFF software package other than libtiff, then you must override the TIFF file methods used in LIBGEOTIFF. To do this, go into directory libgeotiff and edit the files: "geo_tiffp.h" "geo_tiffp.c" which contain all of the TIFF externals. You will need to define your own versions of the TIFF tag reading, writing, and memory allocation calls. See the comments of those two files to see what needs to be changed. Also, whatever software package you use will have to recognize the GeoTIFF tags listed in the include files, and permit variable-length arrays to be passed in to those tags. Credits ------- o This library was originally written by Niles Ritter (also the primary author of the GeoTIFF specification). o Eric Brown of Universal Systems, who contributed a bug fix to GTIFPCSToImage(). o Safe Software (www.safe.com) who supported by upgrade to use the EPSG 6.2.2 database for libgeotiff 1.2.0. o Many others who contributed before it occured to me to maintain credits. libgeotiff-1.7.4/Makefile.am0000664000175000017500000000447014755112526012631 00000000000000SUBDIRS = libxtiff . bin man cmake test AUTOMAKE_OPTIONS = dist-zip subdir-objects ACLOCAL_AMFLAGS = -I m4 include $(top_srcdir)/m4/doxygen.am PROJ_CFLAGS= @PROJ_INCLUDE@ if TIFF_IS_CONFIG TIFF_CFLAGS = @TIFF_INC@ -DHAVE_TIFF=1 endif AM_CFLAGS = -I$(srcdir)/libxtiff $(PROJ_CFLAGS) $(TIFF_CFLAGS) include_HEADERS = geotiffio.h \ geovalues.h \ geonames.h \ geokeys.h \ geo_tiffp.h \ geo_keyp.h \ geo_normalize.h \ cpl_serv.h \ geo_simpletags.h \ epsg_datum.inc \ epsg_gcs.inc \ epsg_pm.inc \ epsg_units.inc \ geo_ctrans.inc \ epsg_ellipse.inc \ epsg_pcs.inc \ epsg_proj.inc \ epsg_vertcs.inc \ geokeys.inc \ geokeys_v1_1.inc nodist_include_HEADERS = geotiff.h \ geo_config.h libgeotiff_la_SOURCES = cpl_serv.c \ geo_extra.c \ geo_free.c \ geo_get.c \ geo_names.c \ geo_new.c \ geo_normalize.c \ geo_print.c \ geo_set.c \ geo_simpletags.c \ geo_tiffp.c \ geo_trans.c \ geo_write.c \ geo_strtod.c \ geotiff_proj4.c libgeotiff_la_LDFLAGS = -version-info 7:3:2 ${NOUNDEFINED} libgeotiff_la_LIBADD = libxtiff/libxtiff.la lib_LTLIBRARIES = libgeotiff.la pkgconfig_DATA = libgeotiff.pc pkgconfigdir = $(libdir)/pkgconfig EXTRA_DIST = autogen.sh \ geo_config.h.vc \ README \ README.WIN \ README_BIN \ LICENSE \ CMakeLists.txt \ libxtiff/CMakeLists.txt \ bin/CMakeLists.txt \ docs/Doxyfile \ docs/geotifcp.html \ docs/index.dox \ docs/listgeo.html \ docs/manual.txt MOSTLYCLEANFILES = $(DX_CLEANFILES) libgeotiff-1.7.4/geo_get.c0000664000175000017500000002373214622755317012360 00000000000000/********************************************************************** * * geo_get.c -- Public routines for GEOTIFF GeoKey access. * * Written By: Niles D. Ritter. * * copyright (c) 1995 Niles D. Ritter * * Permission granted to use this software, so long as this copyright * notice accompanies any products derived therefrom. * **********************************************************************/ #include #include "geotiff.h" /* public interface */ #include "geo_tiffp.h" /* external TIFF interface */ #include "geo_keyp.h" /* private interface */ /* return the Header info of this geotiff file */ void GTIFDirectoryInfo(GTIF *gtif, int version[3], int *keycount) { if (version) { version[0] = gtif->gt_version; version[1] = gtif->gt_rev_major; version[2] = gtif->gt_rev_minor; } if (keycount) *keycount = gtif->gt_num_keys; } int GTIFKeyInfo(GTIF *gtif, geokey_t key, int *size, tagtype_t* type) { int nIndex = gtif->gt_keyindex[ key ]; if (!nIndex) return 0; GeoKey *keyptr = gtif->gt_keys + nIndex; if (size) *size = (int) keyptr->gk_size; if (type) *type = keyptr->gk_type; return (int)keyptr->gk_count; } /** This function reads the value of a single GeoKey from a GeoTIFF file. @param gtif The geotiff information handle from GTIFNew(). @param thekey The geokey_t name (such as ProjectedCSTypeGeoKey). This must come from the list of legal geokey_t values (an enumeration) listed below. @param val The val argument is a pointer to the variable into which the value should be read. The type of the variable varies depending on the geokey_t given. While there is no ready mapping of geokey_t values onto types, in general code values are of type short, citations are strings, and everything else is of type double. Note that pointer's to int should never be passed to GTIFKeyGet() for integer values as they will be shorts, and the int's may not be properly initialized (and will be grossly wrong on MSB systems). @param nIndex Indicates how far into the list of values for this geokey to offset. Should normally be zero. @param count Indicates how many values to read. At this time all keys except for strings have only one value, so nIndex should be zero, and count should be one. @return The GTIFKeyGet() function returns the number of values read. Normally this would be one if successful or zero if the key doesn't exist for this file. From geokeys.inc we see the following geokey_t values are possible:

-- 6.2.1 GeoTIFF Configuration Keys --

ValuePair(  GTModelTypeGeoKey,	1024) -- Section 6.3.1.1 Codes       --
ValuePair(  GTRasterTypeGeoKey,	1025) -- Section 6.3.1.2 Codes       --
ValuePair(  GTCitationGeoKey,	1026) -- documentation --

-- 6.2.2 Geographic CS Parameter Keys --

ValuePair(  GeographicTypeGeoKey,	2048) -- Section 6.3.2.1 Codes     --
ValuePair(  GeogCitationGeoKey,	2049) -- documentation             --
ValuePair(  GeogGeodeticDatumGeoKey,	2050) -- Section 6.3.2.2 Codes     --
ValuePair(  GeogPrimeMeridianGeoKey,	2051) -- Section 6.3.2.4 codes     --
ValuePair(  GeogLinearUnitsGeoKey,	2052) -- Section 6.3.1.3 Codes     --
ValuePair(  GeogLinearUnitSizeGeoKey,	2053) -- meters                    --
ValuePair(  GeogAngularUnitsGeoKey,	2054) -- Section 6.3.1.4 Codes     --
ValuePair(  GeogAngularUnitSizeGeoKey,	2055) -- radians                   --
ValuePair(  GeogEllipsoidGeoKey,	2056) -- Section 6.3.2.3 Codes     --
ValuePair(  GeogSemiMajorAxisGeoKey,	2057) -- GeogLinearUnits           --
ValuePair(  GeogSemiMinorAxisGeoKey,	2058) -- GeogLinearUnits           --
ValuePair(  GeogInvFlatteningGeoKey,	2059) -- ratio                     --
ValuePair(  GeogAzimuthUnitsGeoKey,	2060) -- Section 6.3.1.4 Codes     --
ValuePair(  GeogPrimeMeridianLongGeoKey,	2061) -- GeoAngularUnit            --

-- 6.2.3 Projected CS Parameter Keys --
--    Several keys have been renamed,--
--    and the deprecated names aliased for backward compatibility --

ValuePair(  ProjectedCSTypeGeoKey,	3072)     -- Section 6.3.3.1 codes   --
ValuePair(  PCSCitationGeoKey,	3073)     -- documentation           --
ValuePair(  ProjectionGeoKey,	3074)     -- Section 6.3.3.2 codes   --
ValuePair(  ProjCoordTransGeoKey,	3075)     -- Section 6.3.3.3 codes   --
ValuePair(  ProjLinearUnitsGeoKey,	3076)     -- Section 6.3.1.3 codes   --
ValuePair(  ProjLinearUnitSizeGeoKey,	3077)     -- meters                  --
ValuePair(  ProjStdParallel1GeoKey,	3078)     -- GeogAngularUnit --
ValuePair(  ProjStdParallelGeoKey,ProjStdParallel1GeoKey) -- ** alias **   --
ValuePair(  ProjStdParallel2GeoKey,	3079)     -- GeogAngularUnit --
ValuePair(  ProjNatOriginLongGeoKey,	3080)     -- GeogAngularUnit --
ValuePair(  ProjOriginLongGeoKey,ProjNatOriginLongGeoKey) -- ** alias **     --
ValuePair(  ProjNatOriginLatGeoKey,	3081)     -- GeogAngularUnit --
ValuePair(  ProjOriginLatGeoKey,ProjNatOriginLatGeoKey)   -- ** alias **     --
ValuePair(  ProjFalseEastingGeoKey,	3082)     -- ProjLinearUnits --
ValuePair(  ProjFalseNorthingGeoKey,	3083)     -- ProjLinearUnits --
ValuePair(  ProjFalseOriginLongGeoKey,	3084)     -- GeogAngularUnit --
ValuePair(  ProjFalseOriginLatGeoKey,	3085)     -- GeogAngularUnit --
ValuePair(  ProjFalseOriginEastingGeoKey,	3086)     -- ProjLinearUnits --
ValuePair(  ProjFalseOriginNorthingGeoKey,	3087)     -- ProjLinearUnits --
ValuePair(  ProjCenterLongGeoKey,	3088)     -- GeogAngularUnit --
ValuePair(  ProjCenterLatGeoKey,	3089)     -- GeogAngularUnit --
ValuePair(  ProjCenterEastingGeoKey,	3090)     -- ProjLinearUnits --
ValuePair(  ProjCenterNorthingGeoKey,	3091)     -- ProjLinearUnits --
ValuePair(  ProjScaleAtNatOriginGeoKey,	3092)     -- ratio   --
ValuePair(  ProjScaleAtOriginGeoKey,ProjScaleAtNatOriginGeoKey)  -- ** alias **   --
ValuePair(  ProjScaleAtCenterGeoKey,	3093)     -- ratio   --
ValuePair(  ProjAzimuthAngleGeoKey,	3094)     -- GeogAzimuthUnit --
ValuePair(  ProjStraightVertPoleLongGeoKey,	3095)     -- GeogAngularUnit --

 6.2.4 Vertical CS Keys

ValuePair(  VerticalCSTypeGeoKey,	4096)  -- Section 6.3.4.1 codes   --
ValuePair(  VerticalCitationGeoKey,	4097)  -- documentation --
ValuePair(  VerticalDatumGeoKey,	4098)  -- Section 6.3.4.2 codes   --
ValuePair(  VerticalUnitsGeoKey,	4099)  -- Section 6.3.1 (.x) codes   --

See https://github.com/opengeospatial/geotiff/pull/99
ValuePair(  CoordinateEpochGeoKey, 5120)  -- GeoKey of type double
*/ int GTIFKeyGet(GTIF *gtif, geokey_t thekey, void *val, int nIndex, int count) { const int kindex = gtif->gt_keyindex[ thekey ]; if (!kindex) return 0; GeoKey *key = gtif->gt_keys+kindex; if (!count) count = (int) (key->gk_count - nIndex); if (count <=0) return 0; if (count > key->gk_count) count = (int) key->gk_count; const gsize_t size = key->gk_size; const tagtype_t type = key->gk_type; char *data; if (count==1 && type==TYPE_SHORT) data = (char *)&key->gk_data; else data = key->gk_data; _GTIFmemcpy( val, data + nIndex*size, count*size ); if (type==TYPE_ASCII) ((char *)val)[count-1] = '\0'; /* replace last char with NULL */ return count; } /************************************************************************/ /* GTIFKeyGetInternal() */ /************************************************************************/ static int GTIFKeyGetInternal( GTIF *psGTIF, geokey_t key, void* pData, int nIndex, int nCount, tagtype_t expected_tagtype ) { tagtype_t tagtype; if( !GTIFKeyInfo(psGTIF, key, NULL, &tagtype) ) return 0; if( tagtype != expected_tagtype ) { if( psGTIF->gt_error_callback ) { psGTIF->gt_error_callback( psGTIF, LIBGEOTIFF_WARNING, "Expected key %s to be of type %s. Got %s", GTIFKeyName(key), GTIFTypeName(expected_tagtype), GTIFTypeName(tagtype)); } return 0; } return GTIFKeyGet( psGTIF, key, pData, nIndex, nCount ); } /************************************************************************/ /* GTIFKeyGetASCII() */ /************************************************************************/ /** * This function reads the value of a single GeoKey of type ASCII from a GeoTIFF file. * * Same as GTIFGetKey() except that it adds checking that the key read is of the * expected type. */ int GTIFKeyGetASCII( GTIF *gtif, geokey_t key, char* szStr, int szStrMaxLen ) { return GTIFKeyGetInternal( gtif, key, szStr, 0, szStrMaxLen, TYPE_ASCII ); } /************************************************************************/ /* GTIFKeyGetSHORT() */ /************************************************************************/ /** * This function reads the value of a single GeoKey of type SHORT from a GeoTIFF file. * * Same as GTIFGetKey() except that it adds checking that the key read is of the * expected type. */ int GTIFKeyGetSHORT( GTIF *gtif, geokey_t key, unsigned short* pnVal, int nIndex, int nCount ) { return GTIFKeyGetInternal(gtif, key, pnVal, nIndex, nCount, TYPE_SHORT); } /************************************************************************/ /* GDALGTIFKeyGetDOUBLE() */ /************************************************************************/ /** * This function reads the value of a single GeoKey of type DOUBLE from a GeoTIFF file. * * Same as GTIFGetKey() except that it adds checking that the key read is of the * expected type. */ int GTIFKeyGetDOUBLE( GTIF *gtif, geokey_t key, double* pdfVal, int nIndex, int nCount ) { return GTIFKeyGetInternal(gtif, key, pdfVal, nIndex, nCount, TYPE_DOUBLE); } libgeotiff-1.7.4/epsg_pm.inc0000664000175000017500000000110214020740032012667 00000000000000/* EPSG/GeoTIFF Rev 0.2 Prime Meridian Database */ /* C database for Geotiff include files. */ /* the macro ValuePair() must be defined */ /* by the enclosing include file */ #ifdef INCLUDE_OLD_CODES #include old_pm.inc #endif /* OLD Codes */ ValuePair(PM_Greenwich, 8901) ValuePair(PM_Lisbon, 8902) ValuePair(PM_Paris, 8903) ValuePair(PM_Bogota, 8904) ValuePair(PM_Madrid, 8905) ValuePair(PM_Rome, 8906) ValuePair(PM_Bern, 8907) ValuePair(PM_Jakarta, 8908) ValuePair(PM_Ferro, 8909) ValuePair(PM_Brussels, 8910) ValuePair(PM_Stockholm, 8911) /* end of list */ libgeotiff-1.7.4/Makefile.in0000664000175000017500000013420014755113347012637 00000000000000# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2018 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # Copyright (C) 2004 Oren Ben-Kiki # This file is distributed under the same terms as the Automake macro files. # Generate automatic documentation using Doxygen. Goals and variables values # are controlled by the various DX_COND_??? conditionals set by autoconf. # # The provided goals are: # doxygen-doc: Generate all doxygen documentation. # doxygen-run: Run doxygen, which will generate some of the documentation # (HTML, CHM, CHI, MAN, RTF, XML) but will not do the post # processing required for the rest of it (PS, PDF, and some MAN). # doxygen-man: Rename some doxygen generated man pages. # doxygen-ps: Generate doxygen PostScript documentation. # doxygen-pdf: Generate doxygen PDF documentation. # # Note that by default these are not integrated into the automake goals. If # doxygen is used to generate man pages, you can achieve this integration by # setting man3_MANS to the list of man pages generated and then adding the # dependency: # # $(man3_MANS): doxygen-doc # # This will cause make to run doxygen and generate all the documentation. # # The following variable is intended for use in Makefile.am: # # DX_CLEANFILES = everything to clean. # # This is usually added to MOSTLYCLEANFILES. VPATH = @srcdir@ am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/m4/ax_prog_doxygen.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ $(am__configure_deps) $(include_HEADERS) $(am__DIST_COMMON) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = geo_config.h CONFIG_CLEAN_FILES = geotiff.h libgeotiff.pc CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgconfigdir)" \ "$(DESTDIR)$(includedir)" "$(DESTDIR)$(includedir)" LTLIBRARIES = $(lib_LTLIBRARIES) libgeotiff_la_DEPENDENCIES = libxtiff/libxtiff.la am_libgeotiff_la_OBJECTS = cpl_serv.lo geo_extra.lo geo_free.lo \ geo_get.lo geo_names.lo geo_new.lo geo_normalize.lo \ geo_print.lo geo_set.lo geo_simpletags.lo geo_tiffp.lo \ geo_trans.lo geo_write.lo geo_strtod.lo geotiff_proj4.lo libgeotiff_la_OBJECTS = $(am_libgeotiff_la_OBJECTS) AM_V_lt = $(am__v_lt_@AM_V@) am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) am__v_lt_0 = --silent am__v_lt_1 = libgeotiff_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(libgeotiff_la_LDFLAGS) $(LDFLAGS) -o $@ AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ depcomp = $(SHELL) $(top_srcdir)/depcomp am__maybe_remake_depfiles = depfiles am__depfiles_remade = ./$(DEPDIR)/cpl_serv.Plo \ ./$(DEPDIR)/geo_extra.Plo ./$(DEPDIR)/geo_free.Plo \ ./$(DEPDIR)/geo_get.Plo ./$(DEPDIR)/geo_names.Plo \ ./$(DEPDIR)/geo_new.Plo ./$(DEPDIR)/geo_normalize.Plo \ ./$(DEPDIR)/geo_print.Plo ./$(DEPDIR)/geo_set.Plo \ ./$(DEPDIR)/geo_simpletags.Plo ./$(DEPDIR)/geo_strtod.Plo \ ./$(DEPDIR)/geo_tiffp.Plo ./$(DEPDIR)/geo_trans.Plo \ ./$(DEPDIR)/geo_write.Plo ./$(DEPDIR)/geotiff_proj4.Plo am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) AM_V_CC = $(am__v_CC_@AM_V@) am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) am__v_CC_0 = @echo " CC " $@; am__v_CC_1 = CCLD = $(CC) LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_CCLD = $(am__v_CCLD_@AM_V@) am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) am__v_CCLD_0 = @echo " CCLD " $@; am__v_CCLD_1 = SOURCES = $(libgeotiff_la_SOURCES) DIST_SOURCES = $(libgeotiff_la_SOURCES) RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac DATA = $(pkgconfig_DATA) HEADERS = $(include_HEADERS) $(nodist_include_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ cscope distdir distdir-am dist dist-all distcheck am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ $(LISP)geo_config.h.in # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags CSCOPE = cscope DIST_SUBDIRS = $(SUBDIRS) am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/geo_config.h.in \ $(srcdir)/geotiff.h.in $(srcdir)/libgeotiff.pc.in \ $(top_srcdir)/m4/doxygen.am AUTHORS COPYING ChangeLog INSTALL \ NEWS README compile config.guess config.sub depcomp install-sh \ ltmain.sh missing DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz $(distdir).zip GZIP_ENV = --best DIST_TARGETS = dist-gzip dist-zip distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_DX_CURRENT_FEATURE = @DX_FLAG_DX_CURRENT_FEATURE@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ JPEG_INC = @JPEG_INC@ JPEG_PREFIX = @JPEG_PREFIX@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBGEOTIFF_MAJOR_VERSION = @LIBGEOTIFF_MAJOR_VERSION@ LIBGEOTIFF_MINOR_VERSION = @LIBGEOTIFF_MINOR_VERSION@ LIBGEOTIFF_PATCH_VERSION = @LIBGEOTIFF_PATCH_VERSION@ LIBGEOTIFF_REV_VERSION = @LIBGEOTIFF_REV_VERSION@ LIBGEOTIFF_STRING_VERSION = @LIBGEOTIFF_STRING_VERSION@ LIBGEOTIFF_VERSION = @LIBGEOTIFF_VERSION@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTIFF_CFLAGS = @LIBTIFF_CFLAGS@ LIBTIFF_LIBS = @LIBTIFF_LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ NOUNDEFINED = @NOUNDEFINED@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ PROJ_CFLAGS = @PROJ_INCLUDE@ PROJ_INCLUDE = @PROJ_INCLUDE@ PROJ_LIBS = @PROJ_LIBS@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ TIFF_INC = @TIFF_INC@ TIFF_PREFIX = @TIFF_PREFIX@ VERSION = @VERSION@ ZIP_INC = @ZIP_INC@ ZIP_PREFIX = @ZIP_PREFIX@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ SUBDIRS = libxtiff . bin man cmake test AUTOMAKE_OPTIONS = dist-zip subdir-objects ACLOCAL_AMFLAGS = -I m4 @DX_COND_doc_TRUE@@DX_COND_html_TRUE@DX_CLEAN_HTML = @DX_DOCDIR@/html @DX_COND_chm_TRUE@@DX_COND_doc_TRUE@DX_CLEAN_CHM = @DX_DOCDIR@/chm @DX_COND_chi_TRUE@@DX_COND_chm_TRUE@@DX_COND_doc_TRUE@DX_CLEAN_CHI = @DX_DOCDIR@/@PACKAGE@.chi @DX_COND_doc_TRUE@@DX_COND_man_TRUE@DX_CLEAN_MAN = @DX_DOCDIR@/man @DX_COND_doc_TRUE@@DX_COND_rtf_TRUE@DX_CLEAN_RTF = @DX_DOCDIR@/rtf @DX_COND_doc_TRUE@@DX_COND_xml_TRUE@DX_CLEAN_XML = @DX_DOCDIR@/xml @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@DX_CLEAN_PS = @DX_DOCDIR@/@PACKAGE@.ps @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@DX_PS_GOAL = doxygen-ps @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@DX_CLEAN_PDF = @DX_DOCDIR@/@PACKAGE@.pdf @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@DX_PDF_GOAL = doxygen-pdf @DX_COND_doc_TRUE@@DX_COND_latex_TRUE@DX_CLEAN_LATEX = @DX_DOCDIR@/latex @DX_COND_doc_TRUE@DX_CLEANFILES = \ @DX_COND_doc_TRUE@ -r @DX_DOCDIR@/@PACKAGE@.tag \ @DX_COND_doc_TRUE@ $(DX_CLEAN_HTML) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_CHM) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_CHI) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_MAN) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_RTF) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_XML) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_PS) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_PDF) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_LATEX) @TIFF_IS_CONFIG_TRUE@TIFF_CFLAGS = @TIFF_INC@ -DHAVE_TIFF=1 AM_CFLAGS = -I$(srcdir)/libxtiff $(PROJ_CFLAGS) $(TIFF_CFLAGS) include_HEADERS = geotiffio.h \ geovalues.h \ geonames.h \ geokeys.h \ geo_tiffp.h \ geo_keyp.h \ geo_normalize.h \ cpl_serv.h \ geo_simpletags.h \ epsg_datum.inc \ epsg_gcs.inc \ epsg_pm.inc \ epsg_units.inc \ geo_ctrans.inc \ epsg_ellipse.inc \ epsg_pcs.inc \ epsg_proj.inc \ epsg_vertcs.inc \ geokeys.inc \ geokeys_v1_1.inc nodist_include_HEADERS = geotiff.h \ geo_config.h libgeotiff_la_SOURCES = cpl_serv.c \ geo_extra.c \ geo_free.c \ geo_get.c \ geo_names.c \ geo_new.c \ geo_normalize.c \ geo_print.c \ geo_set.c \ geo_simpletags.c \ geo_tiffp.c \ geo_trans.c \ geo_write.c \ geo_strtod.c \ geotiff_proj4.c libgeotiff_la_LDFLAGS = -version-info 7:3:2 ${NOUNDEFINED} libgeotiff_la_LIBADD = libxtiff/libxtiff.la lib_LTLIBRARIES = libgeotiff.la pkgconfig_DATA = libgeotiff.pc pkgconfigdir = $(libdir)/pkgconfig EXTRA_DIST = autogen.sh \ geo_config.h.vc \ README \ README.WIN \ README_BIN \ LICENSE \ CMakeLists.txt \ libxtiff/CMakeLists.txt \ bin/CMakeLists.txt \ docs/Doxyfile \ docs/geotifcp.html \ docs/index.dox \ docs/listgeo.html \ docs/manual.txt MOSTLYCLEANFILES = $(DX_CLEANFILES) all: geo_config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: .SUFFIXES: .c .lo .o .obj am--refresh: Makefile @: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/m4/doxygen.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ esac; $(top_srcdir)/m4/doxygen.am $(am__empty): $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): geo_config.h: stamp-h1 @test -f $@ || rm -f stamp-h1 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 stamp-h1: $(srcdir)/geo_config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status geo_config.h $(srcdir)/geo_config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f geo_config.h stamp-h1 geotiff.h: $(top_builddir)/config.status $(srcdir)/geotiff.h.in cd $(top_builddir) && $(SHELL) ./config.status $@ libgeotiff.pc: $(top_builddir)/config.status $(srcdir)/libgeotiff.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" || { \ echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ } uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ done clean-libLTLIBRARIES: -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) @list='$(lib_LTLIBRARIES)'; \ locs=`for p in $$list; do echo $$p; done | \ sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ sort -u`; \ test -z "$$locs" || { \ echo rm -f $${locs}; \ rm -f $${locs}; \ } libgeotiff.la: $(libgeotiff_la_OBJECTS) $(libgeotiff_la_DEPENDENCIES) $(EXTRA_libgeotiff_la_DEPENDENCIES) $(AM_V_CCLD)$(libgeotiff_la_LINK) -rpath $(libdir) $(libgeotiff_la_OBJECTS) $(libgeotiff_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpl_serv.Plo@am__quote@ # am--include-marker @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/geo_extra.Plo@am__quote@ # am--include-marker @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/geo_free.Plo@am__quote@ # am--include-marker @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/geo_get.Plo@am__quote@ # am--include-marker @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/geo_names.Plo@am__quote@ # am--include-marker @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/geo_new.Plo@am__quote@ # am--include-marker @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/geo_normalize.Plo@am__quote@ # am--include-marker @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/geo_print.Plo@am__quote@ # am--include-marker @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/geo_set.Plo@am__quote@ # am--include-marker @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/geo_simpletags.Plo@am__quote@ # am--include-marker @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/geo_strtod.Plo@am__quote@ # am--include-marker @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/geo_tiffp.Plo@am__quote@ # am--include-marker @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/geo_trans.Plo@am__quote@ # am--include-marker @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/geo_write.Plo@am__quote@ # am--include-marker @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/geotiff_proj4.Plo@am__quote@ # am--include-marker $(am__depfiles_remade): @$(MKDIR_P) $(@D) @echo '# dummy' >$@-t && $(am__mv) $@-t $@ am--depfiles: $(am__depfiles_remade) .c.o: @am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ @am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< .c.obj: @am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ @am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ @am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt install-pkgconfigDATA: $(pkgconfig_DATA) @$(NORMAL_INSTALL) @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ done uninstall-pkgconfigDATA: @$(NORMAL_UNINSTALL) @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) install-includeHEADERS: $(include_HEADERS) @$(NORMAL_INSTALL) @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \ $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ done uninstall-includeHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir) install-nodist_includeHEADERS: $(nodist_include_HEADERS) @$(NORMAL_INSTALL) @list='$(nodist_include_HEADERS)'; test -n "$(includedir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \ $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ done uninstall-nodist_includeHEADERS: @$(NORMAL_UNINSTALL) @list='$(nodist_include_HEADERS)'; test -n "$(includedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir) # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am distdir-am: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-tarZ: distdir @echo WARNING: "Support for distribution archives compressed with" \ "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir @echo WARNING: "Support for shar distribution archives is" \ "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build/sub \ && ../../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ --srcdir=../.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile $(LTLIBRARIES) $(DATA) $(HEADERS) geo_config.h installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(includedir)" "$(DESTDIR)$(includedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f ./$(DEPDIR)/cpl_serv.Plo -rm -f ./$(DEPDIR)/geo_extra.Plo -rm -f ./$(DEPDIR)/geo_free.Plo -rm -f ./$(DEPDIR)/geo_get.Plo -rm -f ./$(DEPDIR)/geo_names.Plo -rm -f ./$(DEPDIR)/geo_new.Plo -rm -f ./$(DEPDIR)/geo_normalize.Plo -rm -f ./$(DEPDIR)/geo_print.Plo -rm -f ./$(DEPDIR)/geo_set.Plo -rm -f ./$(DEPDIR)/geo_simpletags.Plo -rm -f ./$(DEPDIR)/geo_strtod.Plo -rm -f ./$(DEPDIR)/geo_tiffp.Plo -rm -f ./$(DEPDIR)/geo_trans.Plo -rm -f ./$(DEPDIR)/geo_write.Plo -rm -f ./$(DEPDIR)/geotiff_proj4.Plo -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-hdr distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-includeHEADERS install-nodist_includeHEADERS \ install-pkgconfigDATA install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-libLTLIBRARIES install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f ./$(DEPDIR)/cpl_serv.Plo -rm -f ./$(DEPDIR)/geo_extra.Plo -rm -f ./$(DEPDIR)/geo_free.Plo -rm -f ./$(DEPDIR)/geo_get.Plo -rm -f ./$(DEPDIR)/geo_names.Plo -rm -f ./$(DEPDIR)/geo_new.Plo -rm -f ./$(DEPDIR)/geo_normalize.Plo -rm -f ./$(DEPDIR)/geo_print.Plo -rm -f ./$(DEPDIR)/geo_set.Plo -rm -f ./$(DEPDIR)/geo_simpletags.Plo -rm -f ./$(DEPDIR)/geo_strtod.Plo -rm -f ./$(DEPDIR)/geo_tiffp.Plo -rm -f ./$(DEPDIR)/geo_trans.Plo -rm -f ./$(DEPDIR)/geo_write.Plo -rm -f ./$(DEPDIR)/geotiff_proj4.Plo -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-includeHEADERS uninstall-libLTLIBRARIES \ uninstall-nodist_includeHEADERS uninstall-pkgconfigDATA .MAKE: $(am__recursive_targets) all install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ am--depfiles am--refresh check check-am clean clean-cscope \ clean-generic clean-libLTLIBRARIES clean-libtool cscope \ cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \ distcheck distclean distclean-compile distclean-generic \ distclean-hdr distclean-libtool distclean-tags distcleancheck \ distdir distuninstallcheck dvi dvi-am html html-am info \ info-am install install-am install-data install-data-am \ install-dvi install-dvi-am install-exec install-exec-am \ install-html install-html-am install-includeHEADERS \ install-info install-info-am install-libLTLIBRARIES \ install-man install-nodist_includeHEADERS install-pdf \ install-pdf-am install-pkgconfigDATA install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ uninstall-am uninstall-includeHEADERS uninstall-libLTLIBRARIES \ uninstall-nodist_includeHEADERS uninstall-pkgconfigDATA .PRECIOUS: Makefile @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@doxygen-ps: @DX_DOCDIR@/@PACKAGE@.ps @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@@DX_DOCDIR@/@PACKAGE@.ps: @DX_DOCDIR@/@PACKAGE@.tag @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ cd @DX_DOCDIR@/latex; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(DX_LATEX) refman.tex; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(MAKEINDEX_PATH) refman.idx; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(DX_LATEX) refman.tex; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ countdown=5; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ refman.log > /dev/null 2>&1 \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ && test $$countdown -gt 0; do \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(DX_LATEX) refman.tex; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ countdown=`expr $$countdown - 1`; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ done; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(DX_DVIPS) -o ../@PACKAGE@.ps refman.dvi @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@doxygen-pdf: @DX_DOCDIR@/@PACKAGE@.pdf @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@@DX_DOCDIR@/@PACKAGE@.pdf: @DX_DOCDIR@/@PACKAGE@.tag @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ cd @DX_DOCDIR@/latex; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(DX_PDFLATEX) refman.tex; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(DX_MAKEINDEX) refman.idx; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(DX_PDFLATEX) refman.tex; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ countdown=5; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ refman.log > /dev/null 2>&1 \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ && test $$countdown -gt 0; do \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(DX_PDFLATEX) refman.tex; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ countdown=`expr $$countdown - 1`; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ done; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ mv refman.pdf ../@PACKAGE@.pdf @DX_COND_doc_TRUE@.PHONY: doxygen-run doxygen-doc $(DX_PS_GOAL) $(DX_PDF_GOAL) @DX_COND_doc_TRUE@.INTERMEDIATE: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) @DX_COND_doc_TRUE@doxygen-run: @DX_DOCDIR@/@PACKAGE@.tag @DX_COND_doc_TRUE@docs: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) @DX_COND_doc_TRUE@@DX_DOCDIR@/@PACKAGE@.tag: $(DX_CONFIG) $(pkginclude_HEADERS) @DX_COND_doc_TRUE@ rm -rf @DX_DOCDIR@ @DX_COND_doc_TRUE@ $(DX_ENV) $(DX_DOXYGEN) $(srcdir)/$(DX_CONFIG) # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: libgeotiff-1.7.4/geo_extra.c0000664000175000017500000006304514622755317012725 00000000000000/****************************************************************************** * $Id$ * * Project: libgeotiff * Purpose: Code to normalize a few common PCS values * Author: Frank Warmerdam, warmerda@home.com * ****************************************************************************** * Copyright (c) 1999, Frank Warmerdam * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. *****************************************************************************/ #include #include "geo_normalize.h" #include "geovalues.h" static const int StatePlaneTable[] = { PCS_NAD83_Alabama_East, Proj_Alabama_CS83_East, PCS_NAD83_Alabama_West, Proj_Alabama_CS83_West, PCS_NAD83_Alaska_zone_1, Proj_Alaska_CS83_1, PCS_NAD83_Alaska_zone_2, Proj_Alaska_CS83_2, PCS_NAD83_Alaska_zone_3, Proj_Alaska_CS83_3, PCS_NAD83_Alaska_zone_4, Proj_Alaska_CS83_4, PCS_NAD83_Alaska_zone_5, Proj_Alaska_CS83_5, PCS_NAD83_Alaska_zone_6, Proj_Alaska_CS83_6, PCS_NAD83_Alaska_zone_7, Proj_Alaska_CS83_7, PCS_NAD83_Alaska_zone_8, Proj_Alaska_CS83_8, PCS_NAD83_Alaska_zone_9, Proj_Alaska_CS83_9, PCS_NAD83_Alaska_zone_10, Proj_Alaska_CS83_10, PCS_NAD83_California_1, Proj_California_CS83_1, PCS_NAD83_California_2, Proj_California_CS83_2, PCS_NAD83_California_3, Proj_California_CS83_3, PCS_NAD83_California_4, Proj_California_CS83_4, PCS_NAD83_California_5, Proj_California_CS83_5, PCS_NAD83_California_6, Proj_California_CS83_6, PCS_NAD83_Arizona_East, Proj_Arizona_CS83_east, PCS_NAD83_Arizona_Central, Proj_Arizona_CS83_Central, PCS_NAD83_Arizona_West, Proj_Arizona_CS83_west, PCS_NAD83_Arkansas_North, Proj_Arkansas_CS83_North, PCS_NAD83_Arkansas_South, Proj_Arkansas_CS83_South, PCS_NAD83_Colorado_North, Proj_Colorado_CS83_North, PCS_NAD83_Colorado_Central, Proj_Colorado_CS83_Central, PCS_NAD83_Colorado_South, Proj_Colorado_CS83_South, PCS_NAD83_Connecticut, Proj_Connecticut_CS83, PCS_NAD83_Delaware, Proj_Delaware_CS83, PCS_NAD83_Florida_East, Proj_Florida_CS83_East, PCS_NAD83_Florida_North, Proj_Florida_CS83_North, PCS_NAD83_Florida_West, Proj_Florida_CS83_West, PCS_NAD83_Hawaii_zone_1, Proj_Hawaii_CS83_1, PCS_NAD83_Hawaii_zone_2, Proj_Hawaii_CS83_2, PCS_NAD83_Hawaii_zone_3, Proj_Hawaii_CS83_3, PCS_NAD83_Hawaii_zone_4, Proj_Hawaii_CS83_4, PCS_NAD83_Hawaii_zone_5, Proj_Hawaii_CS83_5, PCS_NAD83_Georgia_East, Proj_Georgia_CS83_East, PCS_NAD83_Georgia_West, Proj_Georgia_CS83_West, PCS_NAD83_Idaho_East, Proj_Idaho_CS83_East, PCS_NAD83_Idaho_Central, Proj_Idaho_CS83_Central, PCS_NAD83_Idaho_West, Proj_Idaho_CS83_West, PCS_NAD83_Illinois_East, Proj_Illinois_CS83_East, PCS_NAD83_Illinois_West, Proj_Illinois_CS83_West, PCS_NAD83_Indiana_East, Proj_Indiana_CS83_East, PCS_NAD83_Indiana_West, Proj_Indiana_CS83_West, PCS_NAD83_Iowa_North, Proj_Iowa_CS83_North, PCS_NAD83_Iowa_South, Proj_Iowa_CS83_South, PCS_NAD83_Kansas_North, Proj_Kansas_CS83_North, PCS_NAD83_Kansas_South, Proj_Kansas_CS83_South, PCS_NAD83_Kentucky_North, Proj_Kentucky_CS83_North, PCS_NAD83_Kentucky_South, Proj_Kentucky_CS83_South, PCS_NAD83_Louisiana_North, Proj_Louisiana_CS83_North, PCS_NAD83_Louisiana_South, Proj_Louisiana_CS83_South, PCS_NAD83_Maine_East, Proj_Maine_CS83_East, PCS_NAD83_Maine_West, Proj_Maine_CS83_West, PCS_NAD83_Maryland, Proj_Maryland_CS83, PCS_NAD83_Massachusetts, Proj_Massachusetts_CS83_Mainland, PCS_NAD83_Massachusetts_Is, Proj_Massachusetts_CS83_Island, PCS_NAD83_Michigan_North, Proj_Michigan_CS83_North, PCS_NAD83_Michigan_Central, Proj_Michigan_CS83_Central, PCS_NAD83_Michigan_South, Proj_Michigan_CS83_South, PCS_NAD83_Minnesota_North, Proj_Minnesota_CS83_North, PCS_NAD83_Minnesota_Cent, Proj_Minnesota_CS83_Central, PCS_NAD83_Minnesota_South, Proj_Minnesota_CS83_South, PCS_NAD83_Mississippi_East, Proj_Mississippi_CS83_East, PCS_NAD83_Mississippi_West, Proj_Mississippi_CS83_West, PCS_NAD83_Missouri_East, Proj_Missouri_CS83_East, PCS_NAD83_Missouri_Central, Proj_Missouri_CS83_Central, PCS_NAD83_Missouri_West, Proj_Missouri_CS83_West, PCS_NAD83_Montana, Proj_Montana_CS83, PCS_NAD83_Nebraska, Proj_Nebraska_CS83, PCS_NAD83_Nevada_East, Proj_Nevada_CS83_East, PCS_NAD83_Nevada_Central, Proj_Nevada_CS83_Central, PCS_NAD83_Nevada_West, Proj_Nevada_CS83_West, PCS_NAD83_New_Hampshire, Proj_New_Hampshire_CS83, PCS_NAD83_New_Jersey, Proj_New_Jersey_CS83, PCS_NAD83_New_Mexico_East, Proj_New_Mexico_CS83_East, PCS_NAD83_New_Mexico_Cent, Proj_New_Mexico_CS83_Central, PCS_NAD83_New_Mexico_West, Proj_New_Mexico_CS83_West, PCS_NAD83_New_York_East, Proj_New_York_CS83_East, PCS_NAD83_New_York_Central, Proj_New_York_CS83_Central, PCS_NAD83_New_York_West, Proj_New_York_CS83_West, PCS_NAD83_New_York_Long_Is, Proj_New_York_CS83_Long_Island, PCS_NAD83_North_Carolina, Proj_North_Carolina_CS83, PCS_NAD83_North_Dakota_N, Proj_North_Dakota_CS83_North, PCS_NAD83_North_Dakota_S, Proj_North_Dakota_CS83_South, PCS_NAD83_Ohio_North, Proj_Ohio_CS83_North, PCS_NAD83_Ohio_South, Proj_Ohio_CS83_South, PCS_NAD83_Oklahoma_North, Proj_Oklahoma_CS83_North, PCS_NAD83_Oklahoma_South, Proj_Oklahoma_CS83_South, PCS_NAD83_Oregon_North, Proj_Oregon_CS83_North, PCS_NAD83_Oregon_South, Proj_Oregon_CS83_South, PCS_NAD83_Pennsylvania_N, Proj_Pennsylvania_CS83_North, PCS_NAD83_Pennsylvania_S, Proj_Pennsylvania_CS83_South, PCS_NAD83_Rhode_Island, Proj_Rhode_Island_CS83, PCS_NAD83_South_Carolina, Proj_South_Carolina_CS83, PCS_NAD83_South_Dakota_N, Proj_South_Dakota_CS83_North, PCS_NAD83_South_Dakota_S, Proj_South_Dakota_CS83_South, PCS_NAD83_Tennessee, Proj_Tennessee_CS83, PCS_NAD83_Texas_North, Proj_Texas_CS83_North, PCS_NAD83_Texas_North_Cen, Proj_Texas_CS83_North_Central, PCS_NAD83_Texas_Central, Proj_Texas_CS83_Central, PCS_NAD83_Texas_South_Cen, Proj_Texas_CS83_South_Central, PCS_NAD83_Texas_South, Proj_Texas_CS83_South, PCS_NAD83_Utah_North, Proj_Utah_CS83_North, PCS_NAD83_Utah_Central, Proj_Utah_CS83_Central, PCS_NAD83_Utah_South, Proj_Utah_CS83_South, PCS_NAD83_Vermont, Proj_Vermont_CS83, PCS_NAD83_Virginia_North, Proj_Virginia_CS83_North, PCS_NAD83_Virginia_South, Proj_Virginia_CS83_South, PCS_NAD83_Washington_North, Proj_Washington_CS83_North, PCS_NAD83_Washington_South, Proj_Washington_CS83_South, PCS_NAD83_West_Virginia_N, Proj_West_Virginia_CS83_North, PCS_NAD83_West_Virginia_S, Proj_West_Virginia_CS83_South, PCS_NAD83_Wisconsin_North, Proj_Wisconsin_CS83_North, PCS_NAD83_Wisconsin_Cen, Proj_Wisconsin_CS83_Central, PCS_NAD83_Wisconsin_South, Proj_Wisconsin_CS83_South, PCS_NAD83_Wyoming_East, Proj_Wyoming_CS83_East, PCS_NAD83_Wyoming_E_Cen, Proj_Wyoming_CS83_East_Central, PCS_NAD83_Wyoming_W_Cen, Proj_Wyoming_CS83_West_Central, PCS_NAD83_Wyoming_West, Proj_Wyoming_CS83_West, PCS_NAD83_Puerto_Rico_Virgin_Is, Proj_Puerto_Rico_Virgin_Is, PCS_NAD27_Alabama_East, Proj_Alabama_CS27_East, PCS_NAD27_Alabama_West, Proj_Alabama_CS27_West, PCS_NAD27_Alaska_zone_1, Proj_Alaska_CS27_1, PCS_NAD27_Alaska_zone_2, Proj_Alaska_CS27_2, PCS_NAD27_Alaska_zone_3, Proj_Alaska_CS27_3, PCS_NAD27_Alaska_zone_4, Proj_Alaska_CS27_4, PCS_NAD27_Alaska_zone_5, Proj_Alaska_CS27_5, PCS_NAD27_Alaska_zone_6, Proj_Alaska_CS27_6, PCS_NAD27_Alaska_zone_7, Proj_Alaska_CS27_7, PCS_NAD27_Alaska_zone_8, Proj_Alaska_CS27_8, PCS_NAD27_Alaska_zone_9, Proj_Alaska_CS27_9, PCS_NAD27_Alaska_zone_10, Proj_Alaska_CS27_10, PCS_NAD27_California_I, Proj_California_CS27_I, PCS_NAD27_California_II, Proj_California_CS27_II, PCS_NAD27_California_III, Proj_California_CS27_III, PCS_NAD27_California_IV, Proj_California_CS27_IV, PCS_NAD27_California_V, Proj_California_CS27_V, PCS_NAD27_California_VI, Proj_California_CS27_VI, PCS_NAD27_California_VII, Proj_California_CS27_VII, PCS_NAD27_Arizona_East, Proj_Arizona_Coordinate_System_east, PCS_NAD27_Arizona_Central, Proj_Arizona_Coordinate_System_Central, PCS_NAD27_Arizona_West, Proj_Arizona_Coordinate_System_west, PCS_NAD27_Arkansas_North, Proj_Arkansas_CS27_North, PCS_NAD27_Arkansas_South, Proj_Arkansas_CS27_South, PCS_NAD27_Colorado_North, Proj_Colorado_CS27_North, PCS_NAD27_Colorado_Central, Proj_Colorado_CS27_Central, PCS_NAD27_Colorado_South, Proj_Colorado_CS27_South, PCS_NAD27_Connecticut, Proj_Connecticut_CS27, PCS_NAD27_Delaware, Proj_Delaware_CS27, PCS_NAD27_Florida_East, Proj_Florida_CS27_East, PCS_NAD27_Florida_North, Proj_Florida_CS27_North, PCS_NAD27_Florida_West, Proj_Florida_CS27_West, PCS_NAD27_Hawaii_zone_1, Proj_Hawaii_CS27_1, PCS_NAD27_Hawaii_zone_2, Proj_Hawaii_CS27_2, PCS_NAD27_Hawaii_zone_3, Proj_Hawaii_CS27_3, PCS_NAD27_Hawaii_zone_4, Proj_Hawaii_CS27_4, PCS_NAD27_Hawaii_zone_5, Proj_Hawaii_CS27_5, PCS_NAD27_Georgia_East, Proj_Georgia_CS27_East, PCS_NAD27_Georgia_West, Proj_Georgia_CS27_West, PCS_NAD27_Idaho_East, Proj_Idaho_CS27_East, PCS_NAD27_Idaho_Central, Proj_Idaho_CS27_Central, PCS_NAD27_Idaho_West, Proj_Idaho_CS27_West, PCS_NAD27_Illinois_East, Proj_Illinois_CS27_East, PCS_NAD27_Illinois_West, Proj_Illinois_CS27_West, PCS_NAD27_Indiana_East, Proj_Indiana_CS27_East, PCS_NAD27_Indiana_West, Proj_Indiana_CS27_West, PCS_NAD27_Iowa_North, Proj_Iowa_CS27_North, PCS_NAD27_Iowa_South, Proj_Iowa_CS27_South, PCS_NAD27_Kansas_North, Proj_Kansas_CS27_North, PCS_NAD27_Kansas_South, Proj_Kansas_CS27_South, PCS_NAD27_Kentucky_North, Proj_Kentucky_CS27_North, PCS_NAD27_Kentucky_South, Proj_Kentucky_CS27_South, PCS_NAD27_Louisiana_North, Proj_Louisiana_CS27_North, PCS_NAD27_Louisiana_South, Proj_Louisiana_CS27_South, PCS_NAD27_Maine_East, Proj_Maine_CS27_East, PCS_NAD27_Maine_West, Proj_Maine_CS27_West, PCS_NAD27_Maryland, Proj_Maryland_CS27, PCS_NAD27_Massachusetts, Proj_Massachusetts_CS27_Mainland, PCS_NAD27_Massachusetts_Is, Proj_Massachusetts_CS27_Island, PCS_NAD27_Michigan_North, Proj_Michigan_CS27_North, PCS_NAD27_Michigan_Central, Proj_Michigan_CS27_Central, PCS_NAD27_Michigan_South, Proj_Michigan_CS27_South, PCS_NAD27_Minnesota_North, Proj_Minnesota_CS27_North, PCS_NAD27_Minnesota_Cent, Proj_Minnesota_CS27_Central, PCS_NAD27_Minnesota_South, Proj_Minnesota_CS27_South, PCS_NAD27_Mississippi_East, Proj_Mississippi_CS27_East, PCS_NAD27_Mississippi_West, Proj_Mississippi_CS27_West, PCS_NAD27_Missouri_East, Proj_Missouri_CS27_East, PCS_NAD27_Missouri_Central, Proj_Missouri_CS27_Central, PCS_NAD27_Missouri_West, Proj_Missouri_CS27_West, PCS_NAD27_Montana_North, Proj_Montana_CS27_North, PCS_NAD27_Montana_Central, Proj_Montana_CS27_Central, PCS_NAD27_Montana_South, Proj_Montana_CS27_South, PCS_NAD27_Nebraska_North, Proj_Nebraska_CS27_North, PCS_NAD27_Nebraska_South, Proj_Nebraska_CS27_South, PCS_NAD27_Nevada_East, Proj_Nevada_CS27_East, PCS_NAD27_Nevada_Central, Proj_Nevada_CS27_Central, PCS_NAD27_Nevada_West, Proj_Nevada_CS27_West, PCS_NAD27_New_Hampshire, Proj_New_Hampshire_CS27, PCS_NAD27_New_Jersey, Proj_New_Jersey_CS27, PCS_NAD27_New_Mexico_East, Proj_New_Mexico_CS27_East, PCS_NAD27_New_Mexico_Cent, Proj_New_Mexico_CS27_Central, PCS_NAD27_New_Mexico_West, Proj_New_Mexico_CS27_West, PCS_NAD27_New_York_East, Proj_New_York_CS27_East, PCS_NAD27_New_York_Central, Proj_New_York_CS27_Central, PCS_NAD27_New_York_West, Proj_New_York_CS27_West, PCS_NAD27_New_York_Long_Is, Proj_New_York_CS27_Long_Island, PCS_NAD27_North_Carolina, Proj_North_Carolina_CS27, PCS_NAD27_North_Dakota_N, Proj_North_Dakota_CS27_North, PCS_NAD27_North_Dakota_S, Proj_North_Dakota_CS27_South, PCS_NAD27_Ohio_North, Proj_Ohio_CS27_North, PCS_NAD27_Ohio_South, Proj_Ohio_CS27_South, PCS_NAD27_Oklahoma_North, Proj_Oklahoma_CS27_North, PCS_NAD27_Oklahoma_South, Proj_Oklahoma_CS27_South, PCS_NAD27_Oregon_North, Proj_Oregon_CS27_North, PCS_NAD27_Oregon_South, Proj_Oregon_CS27_South, PCS_NAD27_Pennsylvania_N, Proj_Pennsylvania_CS27_North, PCS_NAD27_Pennsylvania_S, Proj_Pennsylvania_CS27_South, PCS_NAD27_Rhode_Island, Proj_Rhode_Island_CS27, PCS_NAD27_South_Carolina_N, Proj_South_Carolina_CS27_North, PCS_NAD27_South_Carolina_S, Proj_South_Carolina_CS27_South, PCS_NAD27_South_Dakota_N, Proj_South_Dakota_CS27_North, PCS_NAD27_South_Dakota_S, Proj_South_Dakota_CS27_South, PCS_NAD27_Tennessee, Proj_Tennessee_CS27, PCS_NAD27_Texas_North, Proj_Texas_CS27_North, PCS_NAD27_Texas_North_Cen, Proj_Texas_CS27_North_Central, PCS_NAD27_Texas_Central, Proj_Texas_CS27_Central, PCS_NAD27_Texas_South_Cen, Proj_Texas_CS27_South_Central, PCS_NAD27_Texas_South, Proj_Texas_CS27_South, PCS_NAD27_Utah_North, Proj_Utah_CS27_North, PCS_NAD27_Utah_Central, Proj_Utah_CS27_Central, PCS_NAD27_Utah_South, Proj_Utah_CS27_South, PCS_NAD27_Vermont, Proj_Vermont_CS27, PCS_NAD27_Virginia_North, Proj_Virginia_CS27_North, PCS_NAD27_Virginia_South, Proj_Virginia_CS27_South, PCS_NAD27_Washington_North, Proj_Washington_CS27_North, PCS_NAD27_Washington_South, Proj_Washington_CS27_South, PCS_NAD27_West_Virginia_N, Proj_West_Virginia_CS27_North, PCS_NAD27_West_Virginia_S, Proj_West_Virginia_CS27_South, PCS_NAD27_Wisconsin_North, Proj_Wisconsin_CS27_North, PCS_NAD27_Wisconsin_Cen, Proj_Wisconsin_CS27_Central, PCS_NAD27_Wisconsin_South, Proj_Wisconsin_CS27_South, PCS_NAD27_Wyoming_East, Proj_Wyoming_CS27_East, PCS_NAD27_Wyoming_E_Cen, Proj_Wyoming_CS27_East_Central, PCS_NAD27_Wyoming_W_Cen, Proj_Wyoming_CS27_West_Central, PCS_NAD27_Wyoming_West, Proj_Wyoming_CS27_West, PCS_NAD27_Puerto_Rico, Proj_Puerto_Rico_CS27, KvUserDefined }; /************************************************************************/ /* GTIFMapSysToPCS() */ /* */ /* Given a Datum, MapSys and zone value generate the best PCS */ /* code possible. */ /************************************************************************/ int GTIFMapSysToPCS( int MapSys, int Datum, int nZone ) { int PCSCode = KvUserDefined; if( MapSys == MapSys_UTM_North ) { if( Datum == GCS_NAD27 ) PCSCode = PCS_NAD27_UTM_zone_3N + nZone - 3; else if( Datum == GCS_NAD83 ) PCSCode = PCS_NAD83_UTM_zone_3N + nZone - 3; else if( Datum == GCS_WGS_72 ) PCSCode = PCS_WGS72_UTM_zone_1N + nZone - 1; else if( Datum == GCS_WGS_72BE ) PCSCode = PCS_WGS72BE_UTM_zone_1N + nZone - 1; else if( Datum == GCS_WGS_84 ) PCSCode = PCS_WGS84_UTM_zone_1N + nZone - 1; } else if( MapSys == MapSys_UTM_South ) { if( Datum == GCS_WGS_72 ) PCSCode = PCS_WGS72_UTM_zone_1S + nZone - 1; else if( Datum == GCS_WGS_72BE ) PCSCode = PCS_WGS72BE_UTM_zone_1S + nZone - 1; else if( Datum == GCS_WGS_84 ) PCSCode = PCS_WGS84_UTM_zone_1S + nZone - 1; } else if( MapSys == MapSys_State_Plane_27 ) { PCSCode = 10000 + nZone; for( int i = 0; StatePlaneTable[i] != KvUserDefined; i += 2 ) { if( StatePlaneTable[i+1] == PCSCode ) PCSCode = StatePlaneTable[i]; } /* Old EPSG code was in error for Tennesse CS27, override */ if( nZone == 4100 ) PCSCode = 2204; } else if( MapSys == MapSys_State_Plane_83 ) { PCSCode = 10000 + nZone + 30; for( int i = 0; StatePlaneTable[i] != KvUserDefined; i += 2 ) { if( StatePlaneTable[i+1] == PCSCode ) PCSCode = StatePlaneTable[i]; } /* Old EPSG code was in error for Kentucky North CS83, override */ if( nZone == 1601 ) PCSCode = 2205; } return PCSCode; } /************************************************************************/ /* GTIFMapSysToProj() */ /* */ /* Given a MapSys and zone value generate the best Proj_ */ /* code possible. */ /************************************************************************/ int GTIFMapSysToProj( int MapSys, int nZone ) { int ProjCode = KvUserDefined; if( MapSys == MapSys_UTM_North ) { ProjCode = Proj_UTM_zone_1N + nZone - 1; } else if( MapSys == MapSys_UTM_South ) { ProjCode = Proj_UTM_zone_1S + nZone - 1; } else if( MapSys == MapSys_State_Plane_27 ) { ProjCode = 10000 + nZone; /* Tennesse override */ if( nZone == 4100 ) ProjCode = 15302; } else if( MapSys == MapSys_State_Plane_83 ) { ProjCode = 10000 + nZone + 30; /* Kentucky North override */ if( nZone == 1601 ) ProjCode = 15303; } return ProjCode; } /************************************************************************/ /* GTIFPCSToMapSys() */ /************************************************************************/ /** * Translate a PCS_ code into a UTM or State Plane map system, a datum, * and a zone if possible. * * @param PCSCode The projection code (PCS_*) as would be stored in the * ProjectedCSTypeGeoKey of a GeoTIFF file. * * @param pDatum Pointer to an integer into which the datum code (GCS_*) * is put if the function succeeds. * * @param pZone Pointer to an integer into which the zone will be placed * if the function is successful. * * @return Returns either MapSys_UTM_North, MapSys_UTM_South, * MapSys_State_Plane_83, MapSys_State_Plane_27 or KvUserDefined. * KvUserDefined indicates that the * function failed to recognise the projection as UTM or State Plane. * * The zone value is only set if the return code is other than KvUserDefined. * For utm map system the returned zone will be between 1 and 60. For * State Plane, the USGS state plane zone number is returned. For instance, * Alabama East is zone 101. * * The datum (really this is the GCS) is set to a GCS_ value such as GCS_NAD27. * * This function is useful to recognise (most) UTM and State Plane coordinate * systems. * It is used as a fallback mechanism by GTIFGetDefn() for normalization when * PROJ database is not found. */ int GTIFPCSToMapSys( int PCSCode, int * pDatum, int * pZone ) { int Datum = KvUserDefined, Proj = KvUserDefined; int nZone = KvUserDefined; /* -------------------------------------------------------------------- */ /* UTM with various datums. Note there are lots of PCS UTM */ /* codes not done yet which use strange datums. */ /* -------------------------------------------------------------------- */ if( PCSCode >= PCS_NAD27_UTM_zone_3N && PCSCode <= PCS_NAD27_UTM_zone_22N ) { Datum = GCS_NAD27; Proj = MapSys_UTM_North; nZone = PCSCode - PCS_NAD27_UTM_zone_3N + 3; } else if( PCSCode >= PCS_NAD83_UTM_zone_3N && PCSCode <= PCS_NAD83_UTM_zone_23N ) { Datum = GCS_NAD83; Proj = MapSys_UTM_North; nZone = PCSCode - PCS_NAD83_UTM_zone_3N + 3; } else if( PCSCode >= PCS_WGS72_UTM_zone_1N && PCSCode <= PCS_WGS72_UTM_zone_60N ) { Datum = GCS_WGS_72; Proj = MapSys_UTM_North; nZone = PCSCode - PCS_WGS72_UTM_zone_1N + 1; } else if( PCSCode >= PCS_WGS72_UTM_zone_1S && PCSCode <= PCS_WGS72_UTM_zone_60S ) { Datum = GCS_WGS_72; Proj = MapSys_UTM_South; nZone = PCSCode - PCS_WGS72_UTM_zone_1S + 1; } else if( PCSCode >= PCS_WGS72BE_UTM_zone_1N && PCSCode <= PCS_WGS72BE_UTM_zone_60N ) { Datum = GCS_WGS_72BE; Proj = MapSys_UTM_North; nZone = PCSCode - PCS_WGS72BE_UTM_zone_1N + 1; } else if( PCSCode >= PCS_WGS72BE_UTM_zone_1S && PCSCode <= PCS_WGS72BE_UTM_zone_60S ) { Datum = GCS_WGS_72BE; Proj = MapSys_UTM_South; nZone = PCSCode - PCS_WGS72BE_UTM_zone_1S + 1; } else if( PCSCode >= PCS_WGS84_UTM_zone_1N && PCSCode <= PCS_WGS84_UTM_zone_60N ) { Datum = GCS_WGS_84; Proj = MapSys_UTM_North; nZone = PCSCode - PCS_WGS84_UTM_zone_1N + 1; } else if( PCSCode >= PCS_WGS84_UTM_zone_1S && PCSCode <= PCS_WGS84_UTM_zone_60S ) { Datum = GCS_WGS_84; Proj = MapSys_UTM_South; nZone = PCSCode - PCS_WGS84_UTM_zone_1S + 1; } else if( PCSCode >= PCS_SAD69_UTM_zone_18N && PCSCode <= PCS_SAD69_UTM_zone_22N ) { Datum = KvUserDefined; Proj = MapSys_UTM_North; nZone = PCSCode - PCS_SAD69_UTM_zone_18N + 18; } else if( PCSCode >= PCS_SAD69_UTM_zone_17S && PCSCode <= PCS_SAD69_UTM_zone_25S ) { Datum = KvUserDefined; Proj = MapSys_UTM_South; nZone = PCSCode - PCS_SAD69_UTM_zone_17S + 17; } /* -------------------------------------------------------------------- */ /* State Plane zones, first we translate any PCS_ codes to */ /* a Proj_ code that we can get a handle on. */ /* -------------------------------------------------------------------- */ for( int i = 0; StatePlaneTable[i] != KvUserDefined; i += 2 ) { if( StatePlaneTable[i] == PCSCode ) PCSCode = StatePlaneTable[i+1]; } if( PCSCode <= 15900 && PCSCode >= 10000 ) { if( (PCSCode % 100) >= 30 ) { Proj = MapSys_State_Plane_83; Datum = GCS_NAD83; } else { Proj = MapSys_State_Plane_27; Datum = GCS_NAD27; } nZone = PCSCode - 10000; if( Datum == GCS_NAD83 ) nZone -= 30; } if( pDatum != NULL ) *pDatum = Datum; if( pZone != NULL ) *pZone = nZone; return Proj; } /************************************************************************/ /* GTIFProjToMapSys() */ /************************************************************************/ /** * Translate a Proj_ code into a UTM or State Plane map system, and a zone * if possible. * * @param ProjCode The projection code (Proj_*) as would be stored in the * ProjectionGeoKey of a GeoTIFF file. * @param pZone Pointer to an integer into which the zone will be placed * if the function is successful. * * @return Returns either MapSys_UTM_North, MapSys_UTM_South, * MapSys_State_Plane_27, MapSys_State_Plane_83 or KvUserDefined. * KvUserDefined indicates that the * function failed to recognise the projection as UTM or State Plane. * * The zone value is only set if the return code is other than KvUserDefined. * For utm map system the returned zone will be between 1 and 60. For * State Plane, the USGS state plane zone number is returned. For instance, * Alabama East is zone 101. * * This function is useful to recognise UTM and State Plane coordinate * systems, and to extract zone numbers so the projections can be * represented as UTM rather than as the underlying projection method such * Transverse Mercator for instance. */ int GTIFProjToMapSys( int ProjCode, int * pZone ) { int nZone = KvUserDefined; int MapSys = KvUserDefined; /* -------------------------------------------------------------------- */ /* Handle UTM. */ /* -------------------------------------------------------------------- */ if( ProjCode >= Proj_UTM_zone_1N && ProjCode <= Proj_UTM_zone_60N ) { MapSys = MapSys_UTM_North; nZone = ProjCode - Proj_UTM_zone_1N + 1; } else if( ProjCode >= Proj_UTM_zone_1S && ProjCode <= Proj_UTM_zone_60S ) { MapSys = MapSys_UTM_South; nZone = ProjCode - Proj_UTM_zone_1S + 1; } /* -------------------------------------------------------------------- */ /* Handle State Plane. I think there are some anomalies in */ /* here, so this is a bit risky. */ /* -------------------------------------------------------------------- */ else if( ProjCode >= 10101 && ProjCode <= 15299 ) { if( ProjCode % 100 >= 30 ) { MapSys = MapSys_State_Plane_83; nZone = ProjCode - 10000 - 30; } else { MapSys = MapSys_State_Plane_27; nZone = ProjCode - 10000; } } if( pZone != NULL ) *pZone = nZone; return MapSys; } libgeotiff-1.7.4/epsg_vertcs.inc0000664000175000017500000000370614020740032013575 00000000000000/* * EPSG/POSC Ellipsoid-referenced Vertical CS * Note: these should correspond exactly with the Ellipsoid database. */ ValuePair(VertCS_Airy_1830_ellipsoid, 5001) ValuePair(VertCS_Airy_Modified_1849_ellipsoid, 5002) ValuePair(VertCS_ANS_ellipsoid, 5003) ValuePair(VertCS_Bessel_1841_ellipsoid, 5004) ValuePair(VertCS_Bessel_Modified_ellipsoid, 5005) ValuePair(VertCS_Bessel_Namibia_ellipsoid, 5006) ValuePair(VertCS_Clarke_1858_ellipsoid, 5007) ValuePair(VertCS_Clarke_1866_ellipsoid, 5008) ValuePair(VertCS_Clarke_1880_Benoit_ellipsoid, 5010) ValuePair(VertCS_Clarke_1880_IGN_ellipsoid, 5011) ValuePair(VertCS_Clarke_1880_RGS_ellipsoid, 5012) ValuePair(VertCS_Clarke_1880_Arc_ellipsoid, 5013) ValuePair(VertCS_Clarke_1880_SGA_1922_ellipsoid, 5014) ValuePair(VertCS_Everest_1830_1937_Adjustment_ellipsoid, 5015) ValuePair(VertCS_Everest_1830_1967_Definition_ellipsoid, 5016) ValuePair(VertCS_Everest_1830_1975_Definition_ellipsoid, 5017) ValuePair(VertCS_Everest_1830_Modified_ellipsoid, 5018) ValuePair(VertCS_GRS_1980_ellipsoid, 5019) ValuePair(VertCS_Helmert_1906_ellipsoid, 5020) ValuePair(VertCS_INS_ellipsoid, 5021) ValuePair(VertCS_International_1924_ellipsoid, 5022) ValuePair(VertCS_International_1967_ellipsoid, 5023) ValuePair(VertCS_Krassowsky_1940_ellipsoid, 5024) ValuePair(VertCS_NWL_9D_ellipsoid, 5025) ValuePair(VertCS_NWL_10D_ellipsoid, 5026) ValuePair(VertCS_Plessis_1817_ellipsoid, 5027) ValuePair(VertCS_Struve_1860_ellipsoid, 5028) ValuePair(VertCS_War_Office_ellipsoid, 5029) ValuePair(VertCS_WGS_84_ellipsoid, 5030) ValuePair(VertCS_GEM_10C_ellipsoid, 5031) ValuePair(VertCS_OSU86F_ellipsoid, 5032) ValuePair(VertCS_OSU91A_ellipsoid, 5033) /* * Other established Vertical CS */ ValuePair(VertCS_Newlyn, 5101) ValuePair(VertCS_North_American_Vertical_Datum_1929, 5102) ValuePair(VertCS_North_American_Vertical_Datum_1988, 5103) ValuePair(VertCS_Yellow_Sea_1956, 5104) ValuePair(VertCS_Baltic_Sea, 5105) ValuePair(VertCS_Caspian_Sea, 5106) /* end of list */ libgeotiff-1.7.4/libgeotiff.pc.in0000664000175000017500000000037214623116362013631 00000000000000prefix=@prefix@ exec_prefix=@exec_prefix@ libdir=@libdir@ includedir=@includedir@ Name: @PACKAGE_NAME@ Description: GeoTIFF file format library Version: @VERSION@ Libs: -L${libdir} -lgeotiff Cflags: -I${includedir} Requires.private: proj, libtiff-4