ussp-push-0.11.orig/0000755000175000017500000000000011054344465014201 5ustar hendrikhendrikussp-push-0.11.orig/Makefile.am0000644000175000017500000000002211054344465016227 0ustar hendrikhendrikSUBDIRS = src doc ussp-push-0.11.orig/doc/0000755000175000017500000000000011054344465014746 5ustar hendrikhendrikussp-push-0.11.orig/doc/ussp-push.html0000644000175000017500000000741711054344465017614 0ustar hendrikhendrik ussp-push Home Page

ussp-push

ussp-push is a OBEX object pusher for Linux, using the BlueZ BlueTooth stack. The original ussp-push implementation required explicit binding to RFCOMM channels before the usage, that made it quite cumbersome to use. I added BlueTooth name resolution, SDP service resolution, and direct access to remote BlueTooth listening channels. The syntax now supported by ussp-push is:

$ ussp-push [--dev DEVID] [--timeo TIMEO] {DEVICE, BTADDR@[BTCHAN]} LFILE RFILE

Where:

DEVID
 HCI device ID (0, 1, ...). Valid only if the BTADDR@BTCHAN syntax is used
TIMEO
 RFCOMM connect timeout in seconds
DEVICE
 RFCOMM device file (like /dev/rfcomm0)
BTADDR@[BTCHAN] BlueTooth address and channel of the remote OBEX listener. The BTADDR can be either a BlueTooth address of a BlueTooth device name. If the BTCHAN is not specified, an SDP quesry is performed to retrieve the remote OBEX service channel
LFILE
 Local file path
RFILE
 Remote file name

License and Software

ussp-push is made available through the GNU GPL license. Please read carefully the license before using the software. The ussp-push source is available here :


ussp-push-0.11.tar.gz



Back Home


ussp-push-0.11.orig/doc/Makefile.am0000644000175000017500000000003311054344465016776 0ustar hendrikhendrikEXTRA_DIST = ussp-push.htmlussp-push-0.11.orig/doc/Makefile.in0000644000175000017500000002074711054344465017025 0ustar hendrikhendrik# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = doc DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BLUETOOTH_CFLAGS = @BLUETOOTH_CFLAGS@ BLUETOOTH_LIBS = @BLUETOOTH_LIBS@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DSYMUTIL = @DSYMUTIL@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ F77 = @F77@ FFLAGS = @FFLAGS@ GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ NMEDIT = @NMEDIT@ OBJEXT = @OBJEXT@ OPENOBEX_CFLAGS = @OPENOBEX_CFLAGS@ OPENOBEX_LIBS = @OPENOBEX_LIBS@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ EXTRA_DIST = ussp-push.html all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-exec-am: install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-info-am .PHONY: all all-am check check-am clean clean-generic clean-libtool \ distclean distclean-generic distclean-libtool distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-exec install-exec-am \ install-info install-info-am install-man install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \ uninstall-info-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: ussp-push-0.11.orig/src/0000755000175000017500000000000011054344465014770 5ustar hendrikhendrikussp-push-0.11.orig/src/obex_macros.h0000644000175000017500000000213211054344465017440 0ustar hendrikhendrik/* * ussp-push by Davide Libenzi ( OBEX file pusher ) * Copyright (C) 2005 Davide Libenzi * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Davide Libenzi * */ #if !defined(_OBEX_MACROS_H) #define _OBEX_MACROS_H extern int bt_debug; #define BTDEBUG(fmt, args...) do { if (bt_debug) fprintf(stderr, fmt, ##args); } while (0) #define BTERROR(fmt, args...) fprintf(stderr, fmt, ##args); #endif ussp-push-0.11.orig/src/obex_main.c0000644000175000017500000002771611054344465017112 0ustar hendrikhendrik/* * UNrooted.net example code * * Most of these functions are just rips from the Affix Bluetooth project OBEX * programs. There are comments in the code about where the functions came * from and what if anything was changed. * * Throughout these functions I had to change the BTDEBUG and BTERROR macros to * printfs. I could have just defined BTERROR and BTDEBUG, but I didn't for * some reason.. who knows. * * The original header comment specifying the copyright holder and the * requirements of the GPL are pasted below. */ /* * Original comment header block: * ---------------------------------------------------------------------- * * Affix - Bluetooth Protocol Stack for Linux * Copyright (C) 2001 Nokia Corporation * Original Author: Dmitry Kasatkin * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * * $Id: obex_client.c,v 1.22 2002/06/25 10:16:49 kds Exp $ * * OBEX client lib * * Fixes: Dmitry Kasatkin * * Heavily modified: Davide Libenzi * * ---------------------------------------------------------------------- * End original comment block */ #include #include #include #include #include #include #include #include #include #include "obex_macros.h" #include "obex_main.h" #include "obex_socket.h" #define UPUSH_APPNAME "ussp-push v0.11" #define BT_SERVICE "OBEX" #define OBEX_PUSH 5 /* * prototypes for local functions */ obex_t *__obex_connect(int devid, void *addr, int timeout, int *err); void obex_event(obex_t * handle, obex_object_t * object, int mode, int event, int obex_cmd, int obex_rsp); void obex_free(client_context_t *gt); int obex_disconnect(obex_t * handle); uint8_t *easy_readfile(const char *filename, int *file_size); int get_filesize(const char *filename); void request_done(obex_t * handle, obex_object_t * object, int obex_cmd, int obex_rsp); int bt_debug; /* * These two functions are from affix/profiles/obex/obex_io.c */ int get_filesize(const char *filename) { struct stat stats; stat(filename, &stats); return (int) stats.st_size; } uint8_t *easy_readfile(const char *filename, int *file_size) { int actual; int fd; uint8_t *buf; fd = open(filename, O_RDONLY, 0); if (fd == -1) { return NULL; } *file_size = get_filesize(filename); printf("name=%s, size=%d\n", filename, *file_size); if (!(buf = malloc(*file_size))) { return NULL; } actual = read(fd, buf, *file_size); close(fd); *file_size = actual; return buf; } /* * This function comes from affix/profiles/obex/obex_client.c .. All I changed * was a BTERROR() macro. The OBEX_HandleInput() calls inside the loop should * result in request_done() getting called eventually. request_done() sets * the clientdone flag which releases the function from its loop */ int handle_response(obex_t * handle, char *service) { int err = 0; client_context_t *gt = OBEX_GetUserData(handle); gt->clientdone = 0; while (!gt->clientdone) { if ((err = OBEX_HandleInput(handle, 1)) < 0) { BTERROR("Error while doing OBEX_HandleInput()\n"); break; } err = (gt->rsp == EOBEX_OK) ? 0 : gt->rsp; } return err; } void obex_free(client_context_t *gt) { cobex_close(gt->private); free(gt); } /* * This function comes from affix/profiles/obex/obex_client.c ... I just * trimmed out handling of other transport styles.. that stuff was using some * globals and I didn't want to pull them in. */ int obex_disconnect(obex_t * handle) { int err; obex_object_t *oo; client_context_t *gt = OBEX_GetUserData(handle); oo = OBEX_ObjectNew(handle, OBEX_CMD_DISCONNECT); err = OBEX_Request(handle, oo); if (err) return err; handle_response(handle, BT_SERVICE); obex_free(gt); return 0; } /* * This function came from the affix/profiles/obex/obex_client.c file. * Initially it did some checks to see what type of link it was working over, * supporting a few different transports it looked like. But the logic around * choosing what to do relied on a couple of global variables, so I just pulled * the decision paths I didn't want and left the ones I did. */ obex_t *__obex_connect(int devid, void *addr, int timeout, int *err) { obex_t *handle; obex_object_t *oo; client_context_t *gt; obex_ctrans_t custfunc; gt = malloc(sizeof(client_context_t)); if (gt == NULL) return NULL; BTDEBUG("__obex_connect: client_context_t = %p\n", gt); memset(gt, 0, sizeof(client_context_t)); gt->private = cobex_open(devid, addr, timeout); if (gt->private == NULL) { BTERROR("cobex_open() failed\n"); free(gt); *err = -1; return NULL; } if (!(handle = OBEX_Init(OBEX_TRANS_CUST, obex_event, 0))) { BTERROR("OBEX_Init failed: %s\n", strerror(errno)); obex_free(gt); *err = -1; return NULL; } memset(&custfunc, 0, sizeof(custfunc)); custfunc.customdata = gt->private; custfunc.connect = cobex_connect; custfunc.disconnect = cobex_disconnect; custfunc.write = cobex_write; custfunc.handleinput = cobex_handle_input; custfunc.listen = cobex_listen; if (OBEX_RegisterCTransport(handle, &custfunc) < 0) { BTERROR("Custom transport callback-registration failed\n"); obex_free(gt); *err = -1; return NULL; } BTDEBUG("Registered transport\n"); OBEX_SetUserData(handle, gt); BTDEBUG("Set user data\n"); /* create new object */ oo = OBEX_ObjectNew(handle, OBEX_CMD_CONNECT); BTDEBUG("Created new objext\n"); *err = OBEX_Request(handle, oo); BTDEBUG("Started a new request\n"); if (*err || gt->rsp) { *err = *err ? *err: gt->rsp; obex_free(gt); goto exit; } *err = handle_response(handle, BT_SERVICE); BTDEBUG("Connection return code: %d, id: %d\n", *err, gt->con_id); if (*err || gt->rsp) { *err = *err ? *err: gt->rsp; goto exit_conn; } printf("Connection established\n"); return handle; exit_conn: obex_disconnect(handle); exit: BTERROR("__obex_connect: error=%d\n", *err); return NULL; } /* * These next two functions come from affix/profiles/obex/obex_client.c * All they do are set a few flags in the structs here or disconnect on error. * The obex_event() function is called by the obex library when it has an event * to deliver to us.. as simple as this is this means just setting that * clientdone flag in the user data struct. Yea... really, that's it. */ void request_done(obex_t * handle, obex_object_t * object, int obex_cmd, int obex_rsp) { client_context_t *gt = OBEX_GetUserData(handle); BTDEBUG("Command (%02x) has now finished, rsp: %02x\n", obex_cmd, obex_rsp); switch (obex_cmd) { case OBEX_CMD_DISCONNECT: BTDEBUG("Disconnect done!\n"); OBEX_TransportDisconnect(handle); gt->clientdone = 1; break; case OBEX_CMD_CONNECT: BTDEBUG("Connected!\n"); /* connect_client(handle, object, obex_rsp); */ gt->clientdone = 1; break; case OBEX_CMD_GET: BTDEBUG("\n\n*** Warning, getclient commented out\n"); /* get_client(handle, object, obex_rsp); */ gt->clientdone = 1; break; case OBEX_CMD_PUT: /* put_client(handle, object, obex_rsp); */ gt->clientdone = 1; break; case OBEX_CMD_SETPATH: BTDEBUG("\n\n*** Warning, setpath_cleitn commented out\n"); /* setpath_client(handle, object, obex_rsp); */ gt->clientdone = 1; break; default: BTDEBUG("Command (%02x) has now finished\n", obex_cmd); break; } } void obex_event(obex_t * handle, obex_object_t * object, int mode, int event, int obex_cmd, int obex_rsp) { client_context_t *gt; gt = OBEX_GetUserData(handle); BTDEBUG("obex_event: client_context_t = %p\n", gt); switch (event) { case OBEX_EV_PROGRESS: BTDEBUG("Made some progress...\n"); break; case OBEX_EV_ABORT: BTDEBUG("Request aborted!\n"); gt->rsp = -EOBEX_ABORT; break; case OBEX_EV_REQDONE: BTDEBUG("ReqDone\n"); request_done(handle, object, obex_cmd, obex_rsp); /* server_done(handle, object, obex_cmd, obex_rsp); */ break; case OBEX_EV_REQHINT: /* Accept any command. Not rellay good, but this is a test-program : * ) */ /* OBEX_ObjectSetRsp(object, OBEX_RSP_CONTINUE, OBEX_RSP_SUCCESS); */ BTDEBUG("SetResp\n"); break; case OBEX_EV_REQ: /* server_request(handle, object, event, obex_cmd); */ BTDEBUG("Server request\n"); break; case OBEX_EV_LINKERR: OBEX_TransportDisconnect(handle); BTDEBUG("Link broken!\n"); gt->rsp = -EOBEX_HUP; break; case OBEX_EV_PARSEERR: BTDEBUG("Parse error!\n"); gt->rsp = -EOBEX_PARSE; break; default: BTDEBUG("Unknown event %02x!\n", event); break; } } /* * This function also comes directly from affix/profiles/obex/obex_client.c * It calls __obex_connect() to connect to the device, and then uses the * OpenOBEX call interface to form a PUT request to send the file to the * device. Originally this used the basename() of path as the name to put as, * but I added a remote parameter so that I didn't have to rename files before * moving them over. Essentially nothing is different. */ int obex_push(int devid, void *addr, char *path, char *remote, int timeout) { int err; obex_object_t *oo; obex_headerdata_t hv; obex_t *handle; uint8_t *buf; int file_size; char *namebuf; int name_len; char *name, *pathc; client_context_t *gt; pathc = strdup(path); name = remote; name_len = (strlen(name) + 1) << 1; if ((namebuf = malloc(name_len))) { OBEX_CharToUnicode((uint8_t *) namebuf, (uint8_t *) name, name_len); } buf = easy_readfile(path, &file_size); if (buf == NULL) { BTERROR("Can't find file %s\n", name); return -ENOENT; } handle = __obex_connect(devid, addr, timeout, &err); if (handle == NULL) { BTERROR("Unable to connect to the server\n"); free(buf); return err; } BTDEBUG("Connected to server\n"); gt = OBEX_GetUserData(handle); BTDEBUG("obex_push: client_context_t = %p\n", gt); gt->opcode = OBEX_PUSH; BTDEBUG("Sending file: %s, path: %s, size: %d\n", name, path, file_size); oo = OBEX_ObjectNew(handle, OBEX_CMD_PUT); hv.bs = (uint8_t *) namebuf; OBEX_ObjectAddHeader(handle, oo, OBEX_HDR_NAME, hv, name_len, 0); hv.bq4 = file_size; OBEX_ObjectAddHeader(handle, oo, OBEX_HDR_LENGTH, hv, sizeof(uint32_t), 0); hv.bs = buf; OBEX_ObjectAddHeader(handle, oo, OBEX_HDR_BODY, hv, file_size, 0); err = OBEX_Request(handle, oo); if (err) return err; err = handle_response(handle, BT_SERVICE); obex_disconnect(handle); free(buf); free(pathc); return err; } int main(int argc, char **argv) { int i, devid = 0, timeout = 60; for (i = 1; i < argc; i++) { if (strcmp(argv[i], "--dev") == 0) { if (++i < argc) devid = atoi(argv[i]); } else if (strcmp(argv[i], "--timeo") == 0) { if (++i < argc) timeout = atoi(argv[i]); } else if (strcmp(argv[i], "--debug") == 0) { bt_debug = 1; } else break; } if ((argc - i) != 3) { BTERROR("%s\n\n" "Usage: %s [--dev DEVID] [--timeo TIMEO] [--debug] {DEVICE, BTADDR@[BTCHAN]} LFILE RFILE\n\n" "\tDEVICE = RFCOMM TTY device file\n" "\tTIMEO = RFCOMM connect timeout in seconds\n" "\tBTADDR@[BTCHAN] = BlueTooth address/name and OBEX channel. If the OBEX channel\n" "\t is not specified, and SDP quesry is used to retrieve it\n" "\tLFILE = Local file path\n" "\tRFILE = Remote file name\n\n", UPUSH_APPNAME, argv[0]); return 1; } BTDEBUG("pushing file %s\n", argv[i + 1]); if (obex_push(devid, argv[i], argv[i + 1], argv[i + 2], timeout) != 0) { BTERROR("Error\n"); return 2; } BTDEBUG("Pushed!!\n"); return 0; } ussp-push-0.11.orig/src/obex_main.h0000644000175000017500000000303011054344465017076 0ustar hendrikhendrik/* * ussp-push by Davide Libenzi ( OBEX file pusher ) * Copyright (C) 2005 Davide Libenzi * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Davide Libenzi * */ #if !defined(_OBEX_MAIN_H) #define _OBEX_MAIN_H #include #include #define EOBEX_OK 0 #define EOBEX_ABORT 1 #define EOBEX_HUP 2 #define EOBEX_PARSE 3 /* * This struct came from the affix/include/affix/obex.h file, it holds all the * information for a client connection like what operation is currently being * carried out and the openobex connection handle. */ typedef struct client_context { int serverdone; int clientdone; char *get_name; /* Name of last get-request */ int rsp; /* error code */ int opcode; char *arg; /* response storage place */ uint32_t con_id; /* connection ide */ void *private; } client_context_t; #endif ussp-push-0.11.orig/src/obex_sdp.c0000644000175000017500000001076211054344465016745 0ustar hendrikhendrik/* * ussp-push by Davide Libenzi ( OBEX file pusher ) * Copyright (C) 2006 Davide Libenzi * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Davide Libenzi * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "obex_macros.h" #include "obex_main.h" #include "obex_sdp.h" static int bt_fill_channs(sdp_data_t *p, unsigned int *channs, int nchanns); static void bt_find_class(void *value, void *priv); static int bt_sdp_search(bdaddr_t const *iface, bdaddr_t const *bdaddr, uuid_t *uidsearch, unsigned int *channs, int nchanns); static int bt_fill_channs(sdp_data_t *p, unsigned int *channs, int nchanns) { int n, proto = 0; for (n = 0; p; p = p->next) { switch (p->dtd) { case SDP_UUID16: case SDP_UUID32: case SDP_UUID128: proto = sdp_uuid_to_proto(&p->val.uuid); break; case SDP_UINT8: if (proto == RFCOMM_UUID) { if (n < nchanns) { BTDEBUG("Found channel %u\n", (unsigned int) p->val.uint8); channs[n++] = p->val.uint8; } } break; } } return n; } static void bt_find_class(void *value, void *priv) { char uuid_str[MAX_LEN_UUID_STR]; char svc_uuid_str[MAX_LEN_SERVICECLASS_UUID_STR]; uuid_t *uuid = (uuid_t *) value; sdp_uuid2strn(uuid, uuid_str, MAX_LEN_UUID_STR); sdp_svclass_uuid2strn(uuid, svc_uuid_str, MAX_LEN_SERVICECLASS_UUID_STR); BTDEBUG("\tFound \"%s\" (0x%s)\n", svc_uuid_str, uuid_str); if (sdp_uuid_to_proto(uuid) == OBEX_OBJPUSH_SVCLASS_ID) *(int *) priv = 1; } static int bt_sdp_search(bdaddr_t const *iface, bdaddr_t const *bdaddr, uuid_t *uidsearch, unsigned int *channs, int nchanns) { int n, s; uint32_t range = 0x0000ffff; sdp_list_t *attrid, *search, *seq, *next; sdp_session_t *sess; char str[32]; sess = sdp_connect(iface, bdaddr, SDP_RETRY_IF_BUSY); ba2str(bdaddr, str); if (!sess) { fprintf(stderr, "Failed to connect to SDP server on %s: %s\n", str, strerror(errno)); return -1; } attrid = sdp_list_append(0, &range); search = sdp_list_append(0, uidsearch); if (sdp_service_search_attr_req(sess, search, SDP_ATTR_REQ_RANGE, attrid, &seq)) { fprintf(stderr, "Service search failed: %s\n", strerror(errno)); sdp_close(sess); return -1; } sdp_list_free(attrid, 0); sdp_list_free(search, 0); for (n = 0; seq; seq = next) { sdp_record_t *rec = (sdp_record_t *) seq->data; sdp_list_t *proto = NULL, *desc; uuid_t suidsearch; sdp_list_t *classes = NULL; sdp_get_service_classes(rec, &classes); if (classes) { int cfound = 0; sdp_list_foreach(classes, bt_find_class, &cfound); if (cfound) { if (sdp_get_access_protos(rec, &proto) == 0) { for (; proto; proto = proto->next) { desc = (sdp_list_t *) proto->data; for (; desc; desc = desc->next) { s = bt_fill_channs((sdp_data_t *) desc->data, channs + n, nchanns - n); if (s > 0) n += s; } } } if (sdp_get_group_id(rec, &suidsearch) != -1) { if (suidsearch.value.uuid16 != uidsearch->value.uuid16) { s = bt_sdp_search(iface, bdaddr, &suidsearch, channs + n, nchanns - n); if (s > 0) n += s; } } } sdp_list_free(classes, free); } next = seq->next; free(seq); sdp_record_free(rec); } sdp_close(sess); return n; } int bt_service_channel(int devid, bdaddr_t const *bdaddr, unsigned int service, unsigned int *channs, int nchanns) { bdaddr_t iface; uuid_t uidsearch; bacpy(&iface, BDADDR_ANY); if (devid >= 0) hci_devba(devid, &iface); sdp_uuid16_create(&uidsearch, service); return bt_sdp_search(&iface, bdaddr, &uidsearch, channs, nchanns); } ussp-push-0.11.orig/src/obex_sdp.h0000644000175000017500000000204511054344465016745 0ustar hendrikhendrik/* * ussp-push by Davide Libenzi ( OBEX file pusher ) * Copyright (C) 2006 Davide Libenzi * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Davide Libenzi * */ #if !defined(_OBEX_SDP_H) #define _OBEX_SDP_H int bt_service_channel(int devid, bdaddr_t const *bdaddr, unsigned int service, unsigned int *channs, int nchanns); #endif ussp-push-0.11.orig/src/obex_socket.c0000644000175000017500000003203111054344465017440 0ustar hendrikhendrik/********************************************************************* * * Filename: cobex_socket.c * Original author: Pontus Fuchs * * Copyright (c) 1999, 2000 Pontus Fuchs, All Rights Reserved. * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * ********************************************************************/ /* * $Id: obex_socket.c,v 1.6 2002/05/15 13:08:06 kds Exp $ * * OBEX serial port transport functions. * * Adapted for Affix, Fixes: Imre Deak * Adapted for Bluez, Fixes marked [REV]: reverend@unrooted.net * Heavily modified for RFCOMM support: Davide Libenzi * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "obex_macros.h" #include "obex_main.h" #include "obex_socket.h" #include "obex_sdp.h" struct cobex_context { bdaddr_t btaddr; char *addr; int devid, chan; const char *portname; int timeout; int rfd, wfd; char inputbuf[4096]; struct termios oldtio, newtio; }; static void cobex_cleanup(struct cobex_context *gt, int force); static char *bt_sock_cachefile(char *cfname, int len); static int bt_sock_cachefile_lookup(FILE * file, const char *btname, bdaddr_t * btaddr); static int bt_sock_cache_lookup(const char *btname, bdaddr_t * btaddr); static int bt_sock_cache_add(FILE * file, const char *btname, bdaddr_t const *btaddr); static char *bt_sock_addr2str(bdaddr_t const *btaddr, char *straddr); static int bt_sock_str2addr(const char *straddr, bdaddr_t * btaddr); static int bt_sock_name2bth(int devid, const char *btname, bdaddr_t * btaddr); static char *bt_sock_cachefile(char *cfname, int len) { char const *env = getenv("HOME"); if (env) snprintf(cfname, len, "%s/.bt-namecache", env); else snprintf(cfname, len, ".bt-namecache"); return cfname; } static int bt_sock_cachefile_lookup(FILE * file, const char *btname, bdaddr_t * btaddr) { char *name, *addr; char buf[512]; rewind(file); while (fgets(buf, sizeof(buf) - 1, file) != NULL) { buf[strlen(buf) - 1] = 0; name = buf; if ((addr = strrchr(name, '\t')) == NULL) continue; *addr++ = '\0'; if (bt_sock_str2addr(addr, btaddr) < 0) continue; if (strcasecmp(name, btname) == 0) return 0; } return -1; } static int bt_sock_cache_lookup(const char *btname, bdaddr_t * btaddr) { int err; FILE *file; char cfname[256]; bt_sock_cachefile(cfname, sizeof(cfname) - 1); if ((file = fopen(cfname, "rt")) == NULL) return -1; err = bt_sock_cachefile_lookup(file, btname, btaddr); fclose(file); return err; } static int bt_sock_cache_add(FILE * file, const char *btname, bdaddr_t const *btaddr) { bdaddr_t laddr; char addr[128]; if (bt_sock_cachefile_lookup(file, btname, &laddr) < 0) { fseek(file, 0, SEEK_END); fprintf(file, "%s\t%s\n", btname, bt_sock_addr2str(btaddr, addr)); } return 0; } static char *bt_sock_addr2str(bdaddr_t const *btaddr, char *straddr) { int i; for (i = 0; i < 6; i++) { if (i) sprintf(straddr + 2 + (i - 1) * 3, ":%02X", btaddr->b[5 - i]); else sprintf(straddr, "%02X", btaddr->b[5]); } return straddr; } static int bt_sock_str2addr(const char *straddr, bdaddr_t * btaddr) { int i; unsigned int aaddr[6]; if (sscanf(straddr, "%02x:%02x:%02x:%02x:%02x:%02x", &aaddr[0], &aaddr[1], &aaddr[2], &aaddr[3], &aaddr[4], &aaddr[5]) != 6) return -1; for (i = 0; i < 6; i++) btaddr->b[5 - i] = (unsigned char) (aaddr[i] & 0xff); return 0; } static int bt_sock_name2bth(int devid, const char *btname, bdaddr_t * btaddr) { int i, niinf, dd, err = -1; inquiry_info *piinf = NULL; FILE *file; char cfname[256]; if (bt_sock_cache_lookup(btname, btaddr) == 0) return 0; bt_sock_cachefile(cfname, sizeof(cfname) - 1); if ((file = fopen(cfname, "r+t")) == NULL && (file = fopen(cfname, "w+t")) == NULL) return -1; fprintf(stderr, "Resolving name '%s' ...\n", btname); if ((niinf = hci_inquiry(devid, 32, -1, NULL, &piinf, 0)) < 0) { fprintf(stderr, "hci_inquiry error\n"); fclose(file); return -1; } if ((dd = hci_open_dev(devid)) < 0) { fprintf(stderr, "Unable to open HCI device hci%d\n", devid); free(piinf); fclose(file); return -1; } for (i = 0; i < niinf; i++) { char devname[128]; if (hci_remote_name(dd, &piinf[i].bdaddr, sizeof(devname) - 1, devname, 100000) >= 0) { if (strcasecmp(devname, btname) == 0) { *btaddr = piinf[i].bdaddr; err = 0; } bt_sock_cache_add(file, devname, &piinf[i].bdaddr); } } hci_close_dev(dd); free(piinf); fclose(file); return err; } int bt_sockndelay(int sfd, int on) { return on ? fcntl(sfd, F_SETFL, fcntl(sfd, F_GETFL, 0) | O_NONBLOCK): fcntl(sfd, F_SETFL, fcntl(sfd, F_GETFL, 0) & ~O_NONBLOCK); } int bt_sock_open(int devid, bdaddr_t const *btaddr, int channel, int timeout) { int sock; struct sockaddr_rc laddr, raddr; struct hci_dev_info di; fd_set wfds; struct timeval tv; char straddr[64], rstraddr[64]; if (hci_devinfo(devid, &di) < 0) { perror("hci_devinfo"); return -1; } laddr.rc_family = AF_BLUETOOTH; laddr.rc_bdaddr = di.bdaddr; laddr.rc_channel = 0; raddr.rc_family = AF_BLUETOOTH; raddr.rc_bdaddr = *btaddr; raddr.rc_channel = channel; if ((sock = socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM)) < 0) { perror("socket"); return -1; } if (bind(sock, (struct sockaddr *) &laddr, sizeof(laddr)) < 0) { perror("bind"); close(sock); return -1; } printf("Local device %s\n", bt_sock_addr2str(&di.bdaddr, straddr)); printf("Remote device %s (%d)\n", bt_sock_addr2str(btaddr, rstraddr), channel); bt_sockndelay(sock, 1); if (connect(sock, (struct sockaddr *) &raddr, sizeof(raddr)) < 0) { if (errno != EINPROGRESS && errno != EWOULDBLOCK) { perror("connect"); close(sock); return -1; } FD_ZERO(&wfds); FD_SET(sock, &wfds); tv.tv_sec = timeout; tv.tv_usec = 0; if (select(sock + 1, (fd_set *) 0, &wfds, (fd_set *) 0, &tv) == -1) { perror("select"); close(sock); return -1; } if (!FD_ISSET(sock, &wfds)) { printf("connect timeout\n"); close(sock); return -1; } } bt_sockndelay(sock, 0); return sock; } static int cobex_init(struct cobex_context *gt) { if (gt->rfd == -1) { if (gt->addr != NULL) { if ((gt->rfd = bt_sock_open(gt->devid, >->btaddr, gt->chan, gt->timeout)) < 0) { return -1; } gt->wfd = gt->rfd; } else if (gt->portname != NULL) { if ((gt->rfd = open(gt->portname, O_RDWR | O_NONBLOCK | O_NOCTTY, 0)) < 0) { perror("Can' t open tty"); return -1; } gt->wfd = gt->rfd; tcgetattr(gt->rfd, >->oldtio); bzero(>->newtio, sizeof(struct termios)); gt->newtio.c_cflag = B115200 | CS8 | CREAD; gt->newtio.c_iflag = IGNPAR; gt->newtio.c_oflag = 0; tcflush(gt->rfd, TCIFLUSH); tcsetattr(gt->rfd, TCSANOW, >->newtio); } else { gt->rfd = 0; gt->wfd = 1; } } return 1; } static void cobex_cleanup(struct cobex_context *gt, int force) { if (gt->portname != NULL) { if (force && gt->rfd != -1) { /* Send a break to get out of OBEX-mode */ if (ioctl(gt->rfd, TCSBRKP, 0) < 0) BTERROR("Unable to send break!\n"); } } if (gt->rfd != -1) close(gt->rfd); if (gt->wfd != -1 && gt->wfd != gt->rfd) close(gt->wfd); gt->rfd = gt->wfd = -1; } struct cobex_context *cobex_open(int devid, const char *port, int timeout) { int n; struct cobex_context *gt; const char *chan; unsigned int channs[4]; gt = malloc(sizeof(struct cobex_context)); if (gt == NULL) return NULL; memset(gt, 0, sizeof(*gt)); gt->rfd = gt->wfd = -1; gt->portname = port; gt->addr = NULL; gt->chan = -1; gt->timeout = timeout; gt->devid = devid; if ((chan = strchr((const char *) port, '@')) != NULL) { gt->addr = strdup((const char *) port); gt->addr[chan - (const char *) port] = 0; if (bt_sock_str2addr(gt->addr, >->btaddr) < 0 && bt_sock_name2bth(devid, gt->addr, >->btaddr) < 0) { fprintf(stderr, "Unable to resolve '%s'\n", gt->addr); cobex_cleanup(gt, 0); return NULL; } if (strlen(chan + 1) > 0) gt->chan = atoi(chan + 1); else { if ((n = bt_service_channel(devid, >->btaddr, OBEX_UUID, channs, sizeof(channs) / sizeof(channs[0]))) <= 0) { fprintf(stderr, "Unable to find OBEX service in '%s'\n", gt->addr); cobex_cleanup(gt, 0); return NULL; } gt->chan = (int) channs[0]; BTDEBUG("Remote OBEX channel: %d\n", gt->chan); } } return gt; } struct cobex_context *cobex_setsocket(const int fd) { struct cobex_context *gt; gt = malloc(sizeof(struct cobex_context)); if (gt == NULL) return NULL; gt->rfd = gt->wfd = fd; gt->portname = NULL; return gt; } int cobex_getsocket(struct cobex_context *gt) { return gt->rfd; } void cobex_close(struct cobex_context *gt) { BTDEBUG("cobex_close\n"); free(gt->addr); free(gt); } int cobex_listen(obex_t * handle, void *userdata) { struct cobex_context *gt; BTDEBUG("cobex_listen\n"); gt = userdata; if (gt->rfd >= 0) { BTDEBUG("fd already exist. Using it\n"); return 1; } if (cobex_init(gt) < 0) return 0; return 1; } int cobex_connect(obex_t * handle, void *userdata) { struct cobex_context *gt; BTDEBUG("cobex_connect\n"); gt = userdata; if (gt->rfd >= 0) { BTDEBUG("fd already exist. Using it\n"); return 1; } if (cobex_init(gt) < 0) return 0; return 1; } int cobex_disconnect(obex_t * handle, void *userdata) { struct cobex_context *gt; BTDEBUG("cobex_disconnect\n"); gt = userdata; cobex_cleanup(gt, 0); return 1; } int cobex_write(obex_t * handle, void *userdata, uint8_t * buffer, int length) { struct cobex_context *gt; int err, actual = 0, pos = 0; BTDEBUG("cobex_write\n"); gt = userdata; /* * [REV] * For some reason the init function wasn't getting called before this call * to write. Probably my own fault, something I ripped out must have in * the initial cobex_connect() callback from OpenOBEX. Fortunately for me * it works fine if I just call the init from the first write. The init * sets the wfd field so that this call gets skipped on all writes after * the first. */ if (gt->wfd < 0) { if ((err = cobex_init(gt)) < 0) { BTDEBUG("cobex_init returned %d\n", err); return 0; } } while (actual < length) { int frag; frag = write(gt->wfd, &buffer[pos], length - pos); if (frag < 0) { if (errno == EAGAIN) { frag = 0; BTDEBUG("Temp. no resource avail.\n"); } else { BTERROR("Write error: %s\n", strerror(errno)); return frag; } } actual += frag; pos += frag; BTDEBUG("Wrote %d fragment\n", frag); } BTDEBUG("Wrote %d bytes (expected %d)\n", actual, length); return actual; } int cobex_handle_input(obex_t * handle, void *userdata, int timeout) { int actual; struct cobex_context *gt; struct timeval time; fd_set fdset; int ret; int16_t expectlen; BTDEBUG("cobex_handle_input\n"); gt = userdata; /* Return if no fd */ if (gt->rfd < 0) return -1; time.tv_sec = timeout; time.tv_usec = 0; FD_ZERO(&fdset); FD_SET(gt->rfd, &fdset); actual = 0; expectlen = 0; do { int len; fd_set fdset1 = fdset; ret = select(gt->rfd + 1, &fdset1, NULL, NULL, &time); /* Check if this is a timeout (0) or error (-1) */ if (ret < 0) { BTERROR("Error (%d)\n", ret); return -1; } if (ret == 0) len = 0; else { len = read(gt->rfd, >->inputbuf[actual], sizeof(gt->inputbuf) - actual); if (len < 0) { if (errno == -EAGAIN) { BTDEBUG("Temp. no resource available.\n"); len = 0; } else { BTDEBUG("read error (%d)\n", len); return len; } } else if (len == 0) { BTDEBUG("Connection terminated.\n"); return -1; } } actual += len; if ((expectlen == 0) && (actual >= 3)) { memcpy(&expectlen, gt->inputbuf + 1, 2); expectlen = ntohs(expectlen); BTDEBUG("expect %d bytes\n", expectlen); if (expectlen > sizeof(gt->inputbuf)) { BTDEBUG("cobex_context buffer size is too small!!!\n"); exit(1); } } } while ((actual < expectlen) || (expectlen == 0)); BTDEBUG("Read %d bytes\n", actual); OBEX_CustomDataFeed(handle, (uint8_t *) gt->inputbuf, actual); return actual; } ussp-push-0.11.orig/src/obex_socket.h0000644000175000017500000000136011054344465017446 0ustar hendrikhendrik/* * UNrooted.net example code * * Prototypes for the functions in obex_socket.c * */ #ifndef OBEX_SOCKET_H_INCLUDED #define OBEX_SOCKET_H_INCLUDED #include struct cobex_context *cobex_open(int devid, const char * port, int timeout); struct cobex_context *cobex_setsocket(const int fd); int cobex_getsocket(struct cobex_context *gt); void cobex_close(struct cobex_context *gt); int cobex_listen(obex_t * handle, void *userdata); int cobex_connect(obex_t * handle, void *userdata); int cobex_disconnect(obex_t * handle, void *userdata); int cobex_write(obex_t * handle, void *userdata, uint8_t * buffer, int length); int cobex_handle_input(obex_t * handle, void *userdata, int timeout); #endif /* OBEX_SOCKET_H_INCLUDED */ ussp-push-0.11.orig/src/Makefile.am0000644000175000017500000000045211054344465017025 0ustar hendrikhendrikbin_PROGRAMS = ussp-push # set the include path found by configure AM_CFLAGS = $(OPENOBEX_CFLAGS) $(BLUETOOTH_CFLAGS) # the library search path. LIBS = $(OPENOBEX_LIBS) $(BLUETOOTH_LIBS) ussp_push_SOURCES = obex_main.c obex_sdp.c obex_socket.c obex_macros.h obex_main.h obex_sdp.h obex_socket.h ussp-push-0.11.orig/src/Makefile.in0000644000175000017500000003430611054344465017043 0ustar hendrikhendrik# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ bin_PROGRAMS = ussp-push$(EXEEXT) subdir = src DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = am__installdirs = "$(DESTDIR)$(bindir)" binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) PROGRAMS = $(bin_PROGRAMS) am_ussp_push_OBJECTS = obex_main.$(OBJEXT) obex_sdp.$(OBJEXT) \ obex_socket.$(OBJEXT) ussp_push_OBJECTS = $(am_ussp_push_OBJECTS) ussp_push_LDADD = $(LDADD) DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(ussp_push_SOURCES) DIST_SOURCES = $(ussp_push_SOURCES) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BLUETOOTH_CFLAGS = @BLUETOOTH_CFLAGS@ BLUETOOTH_LIBS = @BLUETOOTH_LIBS@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DSYMUTIL = @DSYMUTIL@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ F77 = @F77@ FFLAGS = @FFLAGS@ GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ # the library search path. LIBS = $(OPENOBEX_LIBS) $(BLUETOOTH_LIBS) LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ NMEDIT = @NMEDIT@ OBJEXT = @OBJEXT@ OPENOBEX_CFLAGS = @OPENOBEX_CFLAGS@ OPENOBEX_LIBS = @OPENOBEX_LIBS@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ # set the include path found by configure AM_CFLAGS = $(OPENOBEX_CFLAGS) $(BLUETOOTH_CFLAGS) ussp_push_SOURCES = obex_main.c obex_sdp.c obex_socket.c obex_macros.h obex_main.h obex_sdp.h obex_socket.h all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu src/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" @list='$(bin_PROGRAMS)'; for p in $$list; do \ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ if test -f $$p \ || test -f $$p1 \ ; then \ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ else :; fi; \ done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(bin_PROGRAMS)'; for p in $$list; do \ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ rm -f "$(DESTDIR)$(bindir)/$$f"; \ done clean-binPROGRAMS: @list='$(bin_PROGRAMS)'; for p in $$list; do \ f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ echo " rm -f $$p $$f"; \ rm -f $$p $$f ; \ done ussp-push$(EXEEXT): $(ussp_push_OBJECTS) $(ussp_push_DEPENDENCIES) @rm -f ussp-push$(EXEEXT) $(LINK) $(ussp_push_LDFLAGS) $(ussp_push_OBJECTS) $(ussp_push_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/obex_main.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/obex_sdp.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/obex_socket.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(PROGRAMS) installdirs: for dir in "$(DESTDIR)$(bindir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-libtool distclean-tags dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-exec-am: install-binPROGRAMS install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-binPROGRAMS uninstall-info-am .PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ clean-generic clean-libtool ctags distclean distclean-compile \ distclean-generic distclean-libtool distclean-tags distdir dvi \ dvi-am html html-am info info-am install install-am \ install-binPROGRAMS install-data install-data-am install-exec \ install-exec-am install-info install-info-am install-man \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ pdf pdf-am ps ps-am tags uninstall uninstall-am \ uninstall-binPROGRAMS uninstall-info-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: ussp-push-0.11.orig/COPYING0000644000175000017500000004313111054344465015236 0ustar hendrikhendrik GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. , 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License. ussp-push-0.11.orig/configure.ac0000644000175000017500000000227711054344465016477 0ustar hendrikhendrik# -*- Autoconf -*- # Process this file with autoconf to produce a configure script. AC_PREREQ(2.61) AC_INIT([ussp-push],[0.11.1],[Davide Libenzi ]) AC_CONFIG_SRCDIR([src/obex_socket.h]) AC_CONFIG_HEADER([config.h]) AM_INIT_AUTOMAKE # Checks for programs. AC_PROG_CC AC_PROG_INSTALL AC_PROG_LIBTOOL # Checks for libraries. ## BLUETOOTH PKG_CHECK_MODULES(BLUETOOTH, bluez) AC_SUBST(BLUETOOTH_CFLAGS) AC_SUBST(BLUETOOTH_LIBS) ## OPENOBEX PKG_CHECK_MODULES(OPENOBEX, openobex) AC_SUBST(OPENOBEX_CFLAGS) AC_SUBST(OPENOBEX_LIBS) # Checks for header files. AC_HEADER_STDC AC_CHECK_HEADERS([arpa/inet.h fcntl.h netinet/in.h stdint.h stdlib.h string.h sys/ioctl.h sys/socket.h sys/time.h termios.h unistd.h]) # Checks for typedefs, structures, and compiler characteristics. AC_C_CONST AC_TYPE_INT16_T AC_HEADER_TIME AC_TYPE_UINT16_T AC_TYPE_UINT32_T AC_TYPE_UINT8_T # Checks for library functions. AC_PROG_GCC_TRADITIONAL AC_FUNC_MALLOC AC_FUNC_SELECT_ARGTYPES AC_FUNC_STAT AC_CHECK_FUNCS([bzero memset select socket strcasecmp strchr strdup strerror strrchr]) AC_CONFIG_FILES([Makefile src/Makefile doc/Makefile]) AC_OUTPUT ussp-push-0.11.orig/AUTHORS0000644000175000017500000000005111054344465015245 0ustar hendrikhendrikDavide Libenzi ussp-push-0.11.orig/NEWS0000644000175000017500000000000011054344465014666 0ustar hendrikhendrikussp-push-0.11.orig/README0000644000175000017500000000272111054344465015063 0ustar hendrikhendrik# # UNrooted.net example hack # To use this you need : - OpenOBEX >= 1.1(http://sourceforge.net/projects/openobex/) - BlueZ (http://bluez.sourceforge.net/download/download.html) Once you have the utility built you need to use rfcomm to bind a serial port device to an RFCOMM channel which accept OBEX Push data, then you should be able to push a file using: ./ussp-push /dev/ttyU1 ./localimage.gif Picture.gif Where '/dev/ttyU1' is the is the serial port device the RFCOMM channel is bound to, './localimage.gif' is a file on the local system, and 'Picture.gif' is the name to push the file as. There are notes about this hack, and some general intro to BlueZ, available on my site: http://www.unrooted.net/hacking/bluez-rfcomm-obex.html Enjoy, Rev (reverend@unrooted.net) -------------------------------------------------------------------------- * Tue, Sep 27 2005 - Davide Libenzi Version 0.5 supports a new --dev parameter to set the HCI device ID (numeric) to be used by ussp-push, in case more BT devices are available on the system. * Sun, Mar 06 2005 - Davide Libenzi The new version of ussp-push supports direct BT connections without RFCOMM channel binding. So, if in the example above /dev/ttyU1 was linked to the BT device name "Mooz" and the OBEX listening channel on "Mooz" is 10, we can now use: ./ussp-push Mooz@10 ./localimage.gif Picture.gif - Davide ussp-push-0.11.orig/ChangeLog0000644000175000017500000000023411054344465015752 0ustar hendrikhendrik* Wed, 02 Apr 2008 - Davide Libenzi Used the autconf build environment created by Atanas Tsonkov . ussp-push-0.11.orig/aclocal.m40000644000175000017500000102774211054344465016056 0ustar hendrikhendrik# generated automatically by aclocal 1.9.6 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- # serial 52 Debian 1.5.26-4 AC_PROG_LIBTOOL # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) # ----------------------------------------------------------- # If this macro is not defined by Autoconf, define it here. m4_ifdef([AC_PROVIDE_IFELSE], [], [m4_define([AC_PROVIDE_IFELSE], [m4_ifdef([AC_PROVIDE_$1], [$2], [$3])])]) # AC_PROG_LIBTOOL # --------------- AC_DEFUN([AC_PROG_LIBTOOL], [AC_REQUIRE([_AC_PROG_LIBTOOL])dnl dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. AC_PROVIDE_IFELSE([AC_PROG_CXX], [AC_LIBTOOL_CXX], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX ])]) dnl And a similar setup for Fortran 77 support AC_PROVIDE_IFELSE([AC_PROG_F77], [AC_LIBTOOL_F77], [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 ])]) dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. AC_PROVIDE_IFELSE([AC_PROG_GCJ], [AC_LIBTOOL_GCJ], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], [AC_LIBTOOL_GCJ], [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], [AC_LIBTOOL_GCJ], [ifdef([AC_PROG_GCJ], [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) ifdef([A][M_PROG_GCJ], [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) ifdef([LT_AC_PROG_GCJ], [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) ])])# AC_PROG_LIBTOOL # _AC_PROG_LIBTOOL # ---------------- AC_DEFUN([_AC_PROG_LIBTOOL], [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl # Prevent multiple expansion define([AC_PROG_LIBTOOL], []) ])# _AC_PROG_LIBTOOL # AC_LIBTOOL_SETUP # ---------------- AC_DEFUN([AC_LIBTOOL_SETUP], [AC_PREREQ(2.50)dnl AC_REQUIRE([AC_ENABLE_SHARED])dnl AC_REQUIRE([AC_ENABLE_STATIC])dnl AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_LD])dnl AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl AC_REQUIRE([AC_PROG_NM])dnl AC_REQUIRE([AC_PROG_LN_S])dnl AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! AC_REQUIRE([AC_OBJEXT])dnl AC_REQUIRE([AC_EXEEXT])dnl dnl AC_LIBTOOL_SYS_MAX_CMD_LEN AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE AC_LIBTOOL_OBJDIR AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl _LT_AC_PROG_ECHO_BACKSLASH case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='sed -e 1s/^X//' [sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] # Same as above, but do not quote variable references. [double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' # Constants: rm="rm -f" # Global variables: default_ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a ltmain="$ac_aux_dir/ltmain.sh" ofile="$default_ofile" with_gnu_ld="$lt_cv_prog_gnu_ld" AC_CHECK_TOOL(AR, ar, false) AC_CHECK_TOOL(RANLIB, ranlib, :) AC_CHECK_TOOL(STRIP, strip, :) old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$AR" && AR=ar test -z "$AR_FLAGS" && AR_FLAGS=cru test -z "$AS" && AS=as test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$DLLTOOL" && DLLTOOL=dlltool test -z "$LD" && LD=ld test -z "$LN_S" && LN_S="ln -s" test -z "$MAGIC_CMD" && MAGIC_CMD=file test -z "$NM" && NM=nm test -z "$SED" && SED=sed test -z "$OBJDUMP" && OBJDUMP=objdump test -z "$RANLIB" && RANLIB=: test -z "$STRIP" && STRIP=: test -z "$ac_objext" && ac_objext=o # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi _LT_CC_BASENAME([$compiler]) # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then AC_PATH_MAGIC fi ;; esac _LT_REQUIRED_DARWIN_CHECKS AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], enable_win32_dll=yes, enable_win32_dll=no) AC_ARG_ENABLE([libtool-lock], [AC_HELP_STRING([--disable-libtool-lock], [avoid locking (might break parallel builds)])]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes AC_ARG_WITH([pic], [AC_HELP_STRING([--with-pic], [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], [pic_mode="$withval"], [pic_mode=default]) test -z "$pic_mode" && pic_mode=default # Use C for the default configuration in the libtool script tagname= AC_LIBTOOL_LANG_C_CONFIG _LT_AC_TAGCONFIG ])# AC_LIBTOOL_SETUP # _LT_AC_SYS_COMPILER # ------------------- AC_DEFUN([_LT_AC_SYS_COMPILER], [AC_REQUIRE([AC_PROG_CC])dnl # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC ])# _LT_AC_SYS_COMPILER # _LT_CC_BASENAME(CC) # ------------------- # Calculate cc_basename. Skip known compiler wrappers and cross-prefix. AC_DEFUN([_LT_CC_BASENAME], [for cc_temp in $1""; do case $cc_temp in compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ]) # _LT_COMPILER_BOILERPLATE # ------------------------ # Check for compiler boilerplate output or warnings with # the simple compiler test code. AC_DEFUN([_LT_COMPILER_BOILERPLATE], [AC_REQUIRE([LT_AC_PROG_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $rm conftest* ])# _LT_COMPILER_BOILERPLATE # _LT_LINKER_BOILERPLATE # ---------------------- # Check for linker boilerplate output or warnings with # the simple link test code. AC_DEFUN([_LT_LINKER_BOILERPLATE], [AC_REQUIRE([LT_AC_PROG_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $rm -r conftest* ])# _LT_LINKER_BOILERPLATE # _LT_REQUIRED_DARWIN_CHECKS # -------------------------- # Check for some things on darwin AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[ case $host_os in rhapsody* | darwin*) AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], [lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. echo "int foo(void){return 1;}" > conftest.c $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib ${wl}-single_module conftest.c if test -f libconftest.dylib; then lt_cv_apple_cc_single_mod=yes rm -rf libconftest.dylib* fi rm conftest.c fi]) AC_CACHE_CHECK([for -exported_symbols_list linker flag], [lt_cv_ld_exported_symbols_list], [lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [lt_cv_ld_exported_symbols_list=yes], [lt_cv_ld_exported_symbols_list=no]) LDFLAGS="$save_LDFLAGS" ]) case $host_os in rhapsody* | darwin1.[[0123]]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[[012]]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}" fi if test "$DSYMUTIL" != ":"; then _lt_dsymutil="~$DSYMUTIL \$lib || :" else _lt_dsymutil= fi ;; esac ]) # _LT_AC_SYS_LIBPATH_AIX # ---------------------- # Links a minimal program and checks the executable # for the system default hardcoded library path. In most cases, # this is /usr/lib:/lib, but when the MPI compilers are used # the location of the communication and MPI libs are included too. # If we don't find anything, use the default library path according # to the aix ld manual. AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], [AC_REQUIRE([LT_AC_PROG_SED])dnl AC_LINK_IFELSE(AC_LANG_PROGRAM,[ lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi],[]) if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ])# _LT_AC_SYS_LIBPATH_AIX # _LT_AC_SHELL_INIT(ARG) # ---------------------- AC_DEFUN([_LT_AC_SHELL_INIT], [ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], [AC_DIVERT_PUSH(NOTICE)]) $1 AC_DIVERT_POP ])# _LT_AC_SHELL_INIT # _LT_AC_PROG_ECHO_BACKSLASH # -------------------------- # Add some code to the start of the generated configure script which # will find an echo command which doesn't interpret backslashes. AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], [_LT_AC_SHELL_INIT([ # Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} case X$ECHO in X*--fallback-echo) # Remove one level of quotation (which was required for Make). ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` ;; esac echo=${ECHO-echo} if test "X[$]1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X[$]1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then # Yippee, $echo works! : else # Restart under the correct shell. exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} fi if test "X[$]1" = X--fallback-echo; then # used as fallback echo shift cat </dev/null 2>&1 && unset CDPATH if test -z "$ECHO"; then if test "X${echo_test_string+set}" != Xset; then # find a string as large as possible, as long as the shell can cope with it for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... if (echo_test_string=`eval $cmd`) 2>/dev/null && echo_test_string=`eval $cmd` && (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null then break fi done fi if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then : else # The Solaris, AIX, and Digital Unix default echo programs unquote # backslashes. This makes it impossible to quote backslashes using # echo "$something" | sed 's/\\/\\\\/g' # # So, first we look for a working echo in the user's PATH. lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for dir in $PATH /usr/ucb; do IFS="$lt_save_ifs" if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$dir/echo" break fi done IFS="$lt_save_ifs" if test "X$echo" = Xecho; then # We didn't find a better echo, so look for alternatives. if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # This shell has a builtin print -r that does the trick. echo='print -r' elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && test "X$CONFIG_SHELL" != X/bin/ksh; then # If we have ksh, try running configure again with it. ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} export ORIGINAL_CONFIG_SHELL CONFIG_SHELL=/bin/ksh export CONFIG_SHELL exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} else # Try using printf. echo='printf %s\n' if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # Cool, printf works : elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL export CONFIG_SHELL SHELL="$CONFIG_SHELL" export SHELL echo="$CONFIG_SHELL [$]0 --fallback-echo" elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$CONFIG_SHELL [$]0 --fallback-echo" else # maybe with a smaller string... prev=: for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null then break fi prev="$cmd" done if test "$prev" != 'sed 50q "[$]0"'; then echo_test_string=`eval $prev` export echo_test_string exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} else # Oops. We lost completely, so just stick with echo. echo=echo fi fi fi fi fi fi # Copy echo and quote the copy suitably for passing to libtool from # the Makefile, instead of quoting the original, which is used later. ECHO=$echo if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" fi AC_SUBST(ECHO) ])])# _LT_AC_PROG_ECHO_BACKSLASH # _LT_AC_LOCK # ----------- AC_DEFUN([_LT_AC_LOCK], [AC_ARG_ENABLE([libtool-lock], [AC_HELP_STRING([--disable-libtool-lock], [avoid locking (might break parallel builds)])]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ s390*-*linux*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_i386" ;; ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; ppc*-*linux*|powerpc*-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_PUSH(C) AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_POP]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; sparc*-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) LD="${LD-ld} -m elf64_sparc" ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], [*-*-cygwin* | *-*-mingw* | *-*-pw32*) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) ;; ]) esac need_locks="$enable_libtool_lock" ])# _LT_AC_LOCK # AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------------------- # Check whether the given compiler option works AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [AC_REQUIRE([LT_AC_PROG_SED]) AC_CACHE_CHECK([$1], [$2], [$2=no ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$3" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi fi $rm conftest* ]) if test x"[$]$2" = xyes; then ifelse([$5], , :, [$5]) else ifelse([$6], , :, [$6]) fi ])# AC_LIBTOOL_COMPILER_OPTION # AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [ACTION-SUCCESS], [ACTION-FAILURE]) # ------------------------------------------------------------ # Check whether the given compiler option works AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [AC_REQUIRE([LT_AC_PROG_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $3" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi else $2=yes fi fi $rm -r conftest* LDFLAGS="$save_LDFLAGS" ]) if test x"[$]$2" = xyes; then ifelse([$4], , :, [$4]) else ifelse([$5], , :, [$5]) fi ])# AC_LIBTOOL_LINKER_OPTION # AC_LIBTOOL_SYS_MAX_CMD_LEN # -------------------------- AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [# find the maximum length of command line arguments AC_MSG_CHECKING([the maximum length of command line arguments]) AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ = "XX$teststring") >/dev/null 2>&1 && new_result=`expr "X$teststring" : ".*" 2>&1` && lt_cv_sys_max_cmd_len=$new_result && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done teststring= # Add a significant safety factor because C++ compilers can tack on massive # amounts of additional arguments before passing them to the linker. # It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac ]) if test -n $lt_cv_sys_max_cmd_len ; then AC_MSG_RESULT($lt_cv_sys_max_cmd_len) else AC_MSG_RESULT(none) fi ])# AC_LIBTOOL_SYS_MAX_CMD_LEN # _LT_AC_CHECK_DLFCN # ------------------ AC_DEFUN([_LT_AC_CHECK_DLFCN], [AC_CHECK_HEADERS(dlfcn.h)dnl ])# _LT_AC_CHECK_DLFCN # _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) # --------------------------------------------------------------------- AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl if test "$cross_compiling" = yes; then : [$4] else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif #ifdef __cplusplus extern "C" void exit (int); #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else puts (dlerror ()); exit (status); }] EOF if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) $1 ;; x$lt_dlneed_uscore) $2 ;; x$lt_dlunknown|x*) $3 ;; esac else : # compilation failed $3 fi fi rm -fr conftest* ])# _LT_AC_TRY_DLOPEN_SELF # AC_LIBTOOL_DLOPEN_SELF # ---------------------- AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ]) ;; *) AC_CHECK_FUNC([shl_load], [lt_cv_dlopen="shl_load"], [AC_CHECK_LIB([dld], [shl_load], [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], [AC_CHECK_FUNC([dlopen], [lt_cv_dlopen="dlopen"], [AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [AC_CHECK_LIB([svld], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], [AC_CHECK_LIB([dld], [dld_link], [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) ]) ]) ]) ]) ]) ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" AC_CACHE_CHECK([whether a program can dlopen itself], lt_cv_dlopen_self, [dnl _LT_AC_TRY_DLOPEN_SELF( lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ]) if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" AC_CACHE_CHECK([whether a statically linked program can dlopen itself], lt_cv_dlopen_self_static, [dnl _LT_AC_TRY_DLOPEN_SELF( lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ]) fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi ])# AC_LIBTOOL_DLOPEN_SELF # AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) # --------------------------------- # Check to see if options -c and -o are simultaneously supported by compiler AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], [AC_REQUIRE([LT_AC_PROG_SED])dnl AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no $rm -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes fi fi chmod u+w . 2>&AS_MESSAGE_LOG_FD $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files $rm out/* && rmdir out cd .. rmdir conftest $rm conftest* ]) ])# AC_LIBTOOL_PROG_CC_C_O # AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) # ----------------------------------------- # Check to see if we can do hard links to lock some files if needed AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_REQUIRE([_LT_AC_LOCK])dnl hard_links="nottested" if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user AC_MSG_CHECKING([if we can lock with hard links]) hard_links=yes $rm conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no AC_MSG_RESULT([$hard_links]) if test "$hard_links" = no; then AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) need_locks=warn fi else need_locks=no fi ])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS # AC_LIBTOOL_OBJDIR # ----------------- AC_DEFUN([AC_LIBTOOL_OBJDIR], [AC_CACHE_CHECK([for objdir], [lt_cv_objdir], [rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null]) objdir=$lt_cv_objdir ])# AC_LIBTOOL_OBJDIR # AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) # ---------------------------------------------- # Check hardcoding attributes. AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_MSG_CHECKING([how to hardcode library paths into programs]) _LT_AC_TAGVAR(hardcode_action, $1)= if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then # We can hardcode non-existant directories. if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then # Linking always hardcodes the temporary library directory. _LT_AC_TAGVAR(hardcode_action, $1)=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. _LT_AC_TAGVAR(hardcode_action, $1)=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. _LT_AC_TAGVAR(hardcode_action, $1)=unsupported fi AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi ])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH # AC_LIBTOOL_SYS_LIB_STRIP # ------------------------ AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], [striplib= old_striplib= AC_MSG_CHECKING([whether stripping libraries is possible]) if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" AC_MSG_RESULT([yes]) else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) fi ;; *) AC_MSG_RESULT([no]) ;; esac fi ])# AC_LIBTOOL_SYS_LIB_STRIP # AC_LIBTOOL_SYS_DYNAMIC_LINKER # ----------------------------- # PORTME Fill in your ld.so characteristics AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_REQUIRE([LT_AC_PROG_SED])dnl AC_MSG_CHECKING([dynamic linker characteristics]) library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" m4_if($1,[],[ if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'` else lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[[lt_foo]]++; } if (lt_freq[[lt_foo]] == 1) { print lt_foo; } }'` sys_lib_search_path_spec=`echo $lt_search_path_spec` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi]) need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[[4-9]]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[[01]] | aix4.[[01]].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[[45]]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin* | yes,mingw* | yes,pw32*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then # It is most probably a Windows format PATH printed by # mingw gcc, but we are running on Cygwin. Gcc prints its search # path with ; separators, and with drive letters. We can handle the # drive letters (cygwin fileutils understands them), so leave them, # especially as we might pass files found there to a mingw objdump, # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; esac ;; *) library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[[123]]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[[01]]* | freebsdelf3.[[01]]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; interix[[3-9]]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; nto-qnx*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[[89]] | openbsd2.[[89]].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no export_dynamic_flag_spec='${wl}-Blargedynsym' runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' shlibpath_overrides_runpath=no else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' shlibpath_overrides_runpath=yes case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac AC_MSG_RESULT([$dynamic_linker]) test "$dynamic_linker" = no && can_build_shared=no AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec], [lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"]) sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec], [lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"]) sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi ])# AC_LIBTOOL_SYS_DYNAMIC_LINKER # _LT_AC_TAGCONFIG # ---------------- AC_DEFUN([_LT_AC_TAGCONFIG], [AC_REQUIRE([LT_AC_PROG_SED])dnl AC_ARG_WITH([tags], [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], [include additional configurations @<:@automatic@:>@])], [tagnames="$withval"]) if test -f "$ltmain" && test -n "$tagnames"; then if test ! -f "${ofile}"; then AC_MSG_WARN([output file `$ofile' does not exist]) fi if test -z "$LTCC"; then eval "`$SHELL ${ofile} --config | grep '^LTCC='`" if test -z "$LTCC"; then AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) else AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) fi fi if test -z "$LTCFLAGS"; then eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" fi # Extract list of available tagged configurations in $ofile. # Note that this assumes the entire list is on one line. available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for tagname in $tagnames; do IFS="$lt_save_ifs" # Check whether tagname contains only valid characters case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in "") ;; *) AC_MSG_ERROR([invalid tag name: $tagname]) ;; esac if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null then AC_MSG_ERROR([tag name \"$tagname\" already exists]) fi # Update the list of available tags. if test -n "$tagname"; then echo appending configuration tag \"$tagname\" to $ofile case $tagname in CXX) if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then AC_LIBTOOL_LANG_CXX_CONFIG else tagname="" fi ;; F77) if test -n "$F77" && test "X$F77" != "Xno"; then AC_LIBTOOL_LANG_F77_CONFIG else tagname="" fi ;; GCJ) if test -n "$GCJ" && test "X$GCJ" != "Xno"; then AC_LIBTOOL_LANG_GCJ_CONFIG else tagname="" fi ;; RC) AC_LIBTOOL_LANG_RC_CONFIG ;; *) AC_MSG_ERROR([Unsupported tag name: $tagname]) ;; esac # Append the new tag name to the list of available tags. if test -n "$tagname" ; then available_tags="$available_tags $tagname" fi fi done IFS="$lt_save_ifs" # Now substitute the updated list of available tags. if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then mv "${ofile}T" "$ofile" chmod +x "$ofile" else rm -f "${ofile}T" AC_MSG_ERROR([unable to update list of available tagged configurations.]) fi fi ])# _LT_AC_TAGCONFIG # AC_LIBTOOL_DLOPEN # ----------------- # enable checks for dlopen support AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) ])# AC_LIBTOOL_DLOPEN # AC_LIBTOOL_WIN32_DLL # -------------------- # declare package support for building win32 DLLs AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) ])# AC_LIBTOOL_WIN32_DLL # AC_ENABLE_SHARED([DEFAULT]) # --------------------------- # implement the --enable-shared flag # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. AC_DEFUN([AC_ENABLE_SHARED], [define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE([shared], [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_shared=]AC_ENABLE_SHARED_DEFAULT) ])# AC_ENABLE_SHARED # AC_DISABLE_SHARED # ----------------- # set the default shared flag to --disable-shared AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_SHARED(no) ])# AC_DISABLE_SHARED # AC_ENABLE_STATIC([DEFAULT]) # --------------------------- # implement the --enable-static flag # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. AC_DEFUN([AC_ENABLE_STATIC], [define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE([static], [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_static=]AC_ENABLE_STATIC_DEFAULT) ])# AC_ENABLE_STATIC # AC_DISABLE_STATIC # ----------------- # set the default static flag to --disable-static AC_DEFUN([AC_DISABLE_STATIC], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_STATIC(no) ])# AC_DISABLE_STATIC # AC_ENABLE_FAST_INSTALL([DEFAULT]) # --------------------------------- # implement the --enable-fast-install flag # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. AC_DEFUN([AC_ENABLE_FAST_INSTALL], [define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE([fast-install], [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) ])# AC_ENABLE_FAST_INSTALL # AC_DISABLE_FAST_INSTALL # ----------------------- # set the default to --disable-fast-install AC_DEFUN([AC_DISABLE_FAST_INSTALL], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_FAST_INSTALL(no) ])# AC_DISABLE_FAST_INSTALL # AC_LIBTOOL_PICMODE([MODE]) # -------------------------- # implement the --with-pic flag # MODE is either `yes' or `no'. If omitted, it defaults to `both'. AC_DEFUN([AC_LIBTOOL_PICMODE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl pic_mode=ifelse($#,1,$1,default) ])# AC_LIBTOOL_PICMODE # AC_PROG_EGREP # ------------- # This is predefined starting with Autoconf 2.54, so this conditional # definition can be removed once we require Autoconf 2.54 or later. m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], [AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 then ac_cv_prog_egrep='grep -E' else ac_cv_prog_egrep='egrep' fi]) EGREP=$ac_cv_prog_egrep AC_SUBST([EGREP]) ])]) # AC_PATH_TOOL_PREFIX # ------------------- # find a file program which can recognize shared library AC_DEFUN([AC_PATH_TOOL_PREFIX], [AC_REQUIRE([AC_PROG_EGREP])dnl AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in [[\\/*] | ?:[\\/]*]) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="ifelse([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$1; then lt_cv_path_MAGIC_CMD="$ac_dir/$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac]) MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else AC_MSG_RESULT(no) fi ])# AC_PATH_TOOL_PREFIX # AC_PATH_MAGIC # ------------- # find a file program which can recognize a shared library AC_DEFUN([AC_PATH_MAGIC], [AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) else MAGIC_CMD=: fi fi ])# AC_PATH_MAGIC # AC_PROG_LD # ---------- # find the pathname to the GNU or non-GNU linker AC_DEFUN([AC_PROG_LD], [AC_ARG_WITH([gnu-ld], [AC_HELP_STRING([--with-gnu-ld], [assume the C compiler uses GNU ld @<:@default=no@:>@])], [test "$withval" = no || with_gnu_ld=yes], [with_gnu_ld=no]) AC_REQUIRE([LT_AC_PROG_SED])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by $CC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]]* | ?:[[\\/]]*) re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the pathname of ld ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[[3-9]]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux* | k*bsd*-gnu) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; nto-qnx*) lt_cv_deplibs_check_method=unknown ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; esac ]) file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown ])# AC_DEPLIBS_CHECK_METHOD # AC_PROG_NM # ---------- # find the pathname to a BSD-compatible name lister AC_DEFUN([AC_PROG_NM], [AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi]) NM="$lt_cv_path_NM" ])# AC_PROG_NM # AC_CHECK_LIBM # ------------- # check for math library AC_DEFUN([AC_CHECK_LIBM], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in *-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) # These system don't have libm, or don't need it ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, cos, LIBM="-lm") ;; esac ])# AC_CHECK_LIBM # AC_LIBLTDL_CONVENIENCE([DIRECTORY]) # ----------------------------------- # sets LIBLTDL to the link flags for the libltdl convenience library and # LTDLINCL to the include flags for the libltdl header and adds # --enable-ltdl-convenience to the configure arguments. Note that # AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, # it is assumed to be `libltdl'. LIBLTDL will be prefixed with # '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' # (note the single quotes!). If your package is not flat and you're not # using automake, define top_builddir and top_srcdir appropriately in # the Makefiles. AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl case $enable_ltdl_convenience in no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; "") enable_ltdl_convenience=yes ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; esac LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) # For backwards non-gettext consistent compatibility... INCLTDL="$LTDLINCL" ])# AC_LIBLTDL_CONVENIENCE # AC_LIBLTDL_INSTALLABLE([DIRECTORY]) # ----------------------------------- # sets LIBLTDL to the link flags for the libltdl installable library and # LTDLINCL to the include flags for the libltdl header and adds # --enable-ltdl-install to the configure arguments. Note that # AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, # and an installed libltdl is not found, it is assumed to be `libltdl'. # LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with # '${top_srcdir}/' (note the single quotes!). If your package is not # flat and you're not using automake, define top_builddir and top_srcdir # appropriately in the Makefiles. # In the future, this macro may have to be called after AC_PROG_LIBTOOL. AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_CHECK_LIB(ltdl, lt_dlinit, [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], [if test x"$enable_ltdl_install" = xno; then AC_MSG_WARN([libltdl not installed, but installation disabled]) else enable_ltdl_install=yes fi ]) if test x"$enable_ltdl_install" = x"yes"; then ac_configure_args="$ac_configure_args --enable-ltdl-install" LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) else ac_configure_args="$ac_configure_args --enable-ltdl-install=no" LIBLTDL="-lltdl" LTDLINCL= fi # For backwards non-gettext consistent compatibility... INCLTDL="$LTDLINCL" ])# AC_LIBLTDL_INSTALLABLE # AC_LIBTOOL_CXX # -------------- # enable support for C++ libraries AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_LT_AC_LANG_CXX]) ])# AC_LIBTOOL_CXX # _LT_AC_LANG_CXX # --------------- AC_DEFUN([_LT_AC_LANG_CXX], [AC_REQUIRE([AC_PROG_CXX]) AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) ])# _LT_AC_LANG_CXX # _LT_AC_PROG_CXXCPP # ------------------ AC_DEFUN([_LT_AC_PROG_CXXCPP], [ AC_REQUIRE([AC_PROG_CXX]) if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then AC_PROG_CXXCPP fi ])# _LT_AC_PROG_CXXCPP # AC_LIBTOOL_F77 # -------------- # enable support for Fortran 77 libraries AC_DEFUN([AC_LIBTOOL_F77], [AC_REQUIRE([_LT_AC_LANG_F77]) ])# AC_LIBTOOL_F77 # _LT_AC_LANG_F77 # --------------- AC_DEFUN([_LT_AC_LANG_F77], [AC_REQUIRE([AC_PROG_F77]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) ])# _LT_AC_LANG_F77 # AC_LIBTOOL_GCJ # -------------- # enable support for GCJ libraries AC_DEFUN([AC_LIBTOOL_GCJ], [AC_REQUIRE([_LT_AC_LANG_GCJ]) ])# AC_LIBTOOL_GCJ # _LT_AC_LANG_GCJ # --------------- AC_DEFUN([_LT_AC_LANG_GCJ], [AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) ])# _LT_AC_LANG_GCJ # AC_LIBTOOL_RC # ------------- # enable support for Windows resource files AC_DEFUN([AC_LIBTOOL_RC], [AC_REQUIRE([LT_AC_PROG_RC]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) ])# AC_LIBTOOL_RC # AC_LIBTOOL_LANG_C_CONFIG # ------------------------ # Ensure that the configuration vars for the C compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) AC_DEFUN([_LT_AC_LANG_C_CONFIG], [lt_save_CC="$CC" AC_LANG_PUSH(C) # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o _LT_AC_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' _LT_AC_SYS_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) AC_LIBTOOL_PROG_COMPILER_PIC($1) AC_LIBTOOL_PROG_CC_C_O($1) AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) AC_LIBTOOL_PROG_LD_SHLIBS($1) AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) AC_LIBTOOL_SYS_LIB_STRIP AC_LIBTOOL_DLOPEN_SELF # Report which library types will actually be built AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) AC_LIBTOOL_CONFIG($1) AC_LANG_POP CC="$lt_save_CC" ])# AC_LIBTOOL_LANG_C_CONFIG # AC_LIBTOOL_LANG_CXX_CONFIG # -------------------------- # Ensure that the configuration vars for the C compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], [AC_LANG_PUSH(C++) AC_REQUIRE([AC_PROG_CXX]) AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(archive_expsym_cmds, $1)= _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= _LT_AC_TAGVAR(hardcode_minus_L, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_AC_TAGVAR(hardcode_automatic, $1)=no _LT_AC_TAGVAR(module_cmds, $1)= _LT_AC_TAGVAR(module_expsym_cmds, $1)= _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown _LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_AC_TAGVAR(no_undefined_flag, $1)= _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Dependencies to place before and after the object being linked: _LT_AC_TAGVAR(predep_objects, $1)= _LT_AC_TAGVAR(postdep_objects, $1)= _LT_AC_TAGVAR(predeps, $1)= _LT_AC_TAGVAR(postdeps, $1)= _LT_AC_TAGVAR(compiler_lib_search_path, $1)= _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)= # Source file extension for C++ test sources. ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o _LT_AC_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) # We don't want -fno-exception wen compiling C++ code, so set the # no_builtin_flag separately if test "$GXX" = yes; then _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' else _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= fi if test "$GXX" = yes; then # Set up default GNU C++ configuration AC_PROG_LD # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ grep 'no-whole-archive' > /dev/null; then _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) _LT_AC_TAGVAR(ld_shlibs, $1)=yes case $host_os in aix3*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; aix[[4-9]]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_AC_TAGVAR(archive_cmds, $1)='' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes if test "$GXX" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_AC_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared libraries. _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; beos*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; cygwin* | mingw* | pw32*) # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; darwin* | rhapsody*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_automatic, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" if test "$GXX" = yes ; then output_verbose_link_cmd='echo' _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" if test "$lt_cv_apple_cc_single_mod" != "yes"; then _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" fi else case $cc_basename in xlc*) output_verbose_link_cmd='echo' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ;; *) _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac fi ;; dgux*) case $cc_basename in ec++*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; freebsd[[12]]*) # C++ shared libraries reported to be fairly broken before switch to ELF _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; freebsd-elf*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions _LT_AC_TAGVAR(ld_shlibs, $1)=yes ;; gnu*) ;; hpux9*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; aCC*) _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) ;; *) _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; esac fi case $host_cpu in hppa*64*|ia64*) _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; aCC*) case $host_cpu in hppa*64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then case $host_cpu in hppa*64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; interix[[3-9]]*) _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' fi fi _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; esac _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ;; linux* | k*bsd*-gnu) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc*) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; esac _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; esac ;; esac ;; lynxos*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; m88k*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; mvs*) case $cc_basename in cxx*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; openbsd2*) # C++ shared libraries are fairly broken _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi output_verbose_link_cmd='echo' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; osf3*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; cxx*) _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; osf4* | osf5*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using # the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; cxx*) _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ $rm $lib.exp' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; lcc*) # Lucid # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; solaris*) case $cc_basename in CC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; esac _LT_AC_TAGVAR(link_all_deplibs, $1)=yes output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; gcx*) # Green Hills C++ Compiler _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' if $CC --version | grep -v '^2\.7' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac fi ;; esac ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. # So that behaviour is only enabled if SCOABSPATH is set to a # non-empty value in the environment. Most likely only useful for # creating official distributions of packages. # This is a hack until libtool officially supports absolute path # names for shared libraries. _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no _LT_AC_TAGVAR(GCC, $1)="$GXX" _LT_AC_TAGVAR(LD, $1)="$LD" AC_LIBTOOL_POSTDEP_PREDEP($1) AC_LIBTOOL_PROG_COMPILER_PIC($1) AC_LIBTOOL_PROG_CC_C_O($1) AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) AC_LIBTOOL_PROG_LD_SHLIBS($1) AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) AC_LIBTOOL_CONFIG($1) AC_LANG_POP CC=$lt_save_CC LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ldcxx=$with_gnu_ld with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld ])# AC_LIBTOOL_LANG_CXX_CONFIG # AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) # ------------------------------------ # Figure out "hidden" library dependencies from verbose # compiler output when linking a shared library. # Parse the compiler output and extract the necessary # objects, libraries and library flags. AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP], [AC_REQUIRE([LT_AC_PROG_SED])dnl dnl we can't use the lt_simple_compile_test_code here, dnl because it contains code intended for an executable, dnl not a library. It's possible we should let each dnl tag define a new lt_????_link_test_code variable, dnl but it's only used here... ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext <&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 # # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac if test "$solaris_use_stlport4" != yes; then _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; solaris*) case $cc_basename in CC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac # Adding this requires a known-good setup of shared libraries for # Sun compiler versions before 5.6, else PIC objects from an old # archive will be linked into the output, leading to subtle bugs. if test "$solaris_use_stlport4" != yes; then _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; esac ]) case " $_LT_AC_TAGVAR(postdeps, $1) " in *" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; esac ])# AC_LIBTOOL_POSTDEP_PREDEP # AC_LIBTOOL_LANG_F77_CONFIG # -------------------------- # Ensure that the configuration vars for the C compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)]) AC_DEFUN([_LT_AC_LANG_F77_CONFIG], [AC_REQUIRE([AC_PROG_F77]) AC_LANG_PUSH(Fortran 77) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(archive_expsym_cmds, $1)= _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= _LT_AC_TAGVAR(hardcode_minus_L, $1)=no _LT_AC_TAGVAR(hardcode_automatic, $1)=no _LT_AC_TAGVAR(module_cmds, $1)= _LT_AC_TAGVAR(module_expsym_cmds, $1)= _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown _LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_AC_TAGVAR(no_undefined_flag, $1)= _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for f77 test sources. ac_ext=f # Object file extension for compiled f77 test sources. objext=o _LT_AC_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${F77-"f77"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_AC_TAGVAR(GCC, $1)="$G77" _LT_AC_TAGVAR(LD, $1)="$LD" AC_LIBTOOL_PROG_COMPILER_PIC($1) AC_LIBTOOL_PROG_CC_C_O($1) AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) AC_LIBTOOL_PROG_LD_SHLIBS($1) AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) AC_LIBTOOL_CONFIG($1) AC_LANG_POP CC="$lt_save_CC" ])# AC_LIBTOOL_LANG_F77_CONFIG # AC_LIBTOOL_LANG_GCJ_CONFIG # -------------------------- # Ensure that the configuration vars for the C compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)]) AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG], [AC_LANG_SAVE # Source file extension for Java test sources. ac_ext=java # Object file extension for compiled Java test sources. objext=o _LT_AC_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="class foo {}" # Code to be used in simple link tests lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${GCJ-"gcj"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) # GCJ did not exist at the time GCC didn't implicitly link libc in. _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) AC_LIBTOOL_PROG_COMPILER_PIC($1) AC_LIBTOOL_PROG_CC_C_O($1) AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) AC_LIBTOOL_PROG_LD_SHLIBS($1) AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) AC_LIBTOOL_CONFIG($1) AC_LANG_RESTORE CC="$lt_save_CC" ])# AC_LIBTOOL_LANG_GCJ_CONFIG # AC_LIBTOOL_LANG_RC_CONFIG # ------------------------- # Ensure that the configuration vars for the Windows resource compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)]) AC_DEFUN([_LT_AC_LANG_RC_CONFIG], [AC_LANG_SAVE # Source file extension for RC test sources. ac_ext=rc # Object file extension for compiled RC test sources. objext=o _LT_AC_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' # Code to be used in simple link tests lt_simple_link_test_code="$lt_simple_compile_test_code" # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${RC-"windres"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes AC_LIBTOOL_CONFIG($1) AC_LANG_RESTORE CC="$lt_save_CC" ])# AC_LIBTOOL_LANG_RC_CONFIG # AC_LIBTOOL_CONFIG([TAGNAME]) # ---------------------------- # If TAGNAME is not passed, then create an initial libtool script # with a default configuration from the untagged config vars. Otherwise # add code to config.status for appending the configuration named by # TAGNAME from the matching tagged config vars. AC_DEFUN([AC_LIBTOOL_CONFIG], [# The else clause should only fire when bootstrapping the # libtool distribution, otherwise you forgot to ship ltmain.sh # with your package, and you will get complaints that there are # no rules to generate ltmain.sh. if test -f "$ltmain"; then # See if we are running on zsh, and set the options which allow our commands through # without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ deplibs_check_method reload_flag reload_cmds need_locks \ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ old_postinstall_cmds old_postuninstall_cmds \ _LT_AC_TAGVAR(compiler, $1) \ _LT_AC_TAGVAR(CC, $1) \ _LT_AC_TAGVAR(LD, $1) \ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \ _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \ _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \ _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \ _LT_AC_TAGVAR(old_archive_cmds, $1) \ _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \ _LT_AC_TAGVAR(predep_objects, $1) \ _LT_AC_TAGVAR(postdep_objects, $1) \ _LT_AC_TAGVAR(predeps, $1) \ _LT_AC_TAGVAR(postdeps, $1) \ _LT_AC_TAGVAR(compiler_lib_search_path, $1) \ _LT_AC_TAGVAR(compiler_lib_search_dirs, $1) \ _LT_AC_TAGVAR(archive_cmds, $1) \ _LT_AC_TAGVAR(archive_expsym_cmds, $1) \ _LT_AC_TAGVAR(postinstall_cmds, $1) \ _LT_AC_TAGVAR(postuninstall_cmds, $1) \ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \ _LT_AC_TAGVAR(allow_undefined_flag, $1) \ _LT_AC_TAGVAR(no_undefined_flag, $1) \ _LT_AC_TAGVAR(export_symbols_cmds, $1) \ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \ _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \ _LT_AC_TAGVAR(hardcode_automatic, $1) \ _LT_AC_TAGVAR(module_cmds, $1) \ _LT_AC_TAGVAR(module_expsym_cmds, $1) \ _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \ _LT_AC_TAGVAR(fix_srcfile_path, $1) \ _LT_AC_TAGVAR(exclude_expsyms, $1) \ _LT_AC_TAGVAR(include_expsyms, $1); do case $var in _LT_AC_TAGVAR(old_archive_cmds, $1) | \ _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \ _LT_AC_TAGVAR(archive_cmds, $1) | \ _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \ _LT_AC_TAGVAR(module_cmds, $1) | \ _LT_AC_TAGVAR(module_expsym_cmds, $1) | \ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \ _LT_AC_TAGVAR(export_symbols_cmds, $1) | \ extract_expsyms_cmds | reload_cmds | finish_cmds | \ postinstall_cmds | postuninstall_cmds | \ old_postinstall_cmds | old_postuninstall_cmds | \ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) # Double-quote double-evaled strings. eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ;; *) eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ;; esac done case $lt_echo in *'\[$]0 --fallback-echo"') lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'` ;; esac ifelse([$1], [], [cfgfile="${ofile}T" trap "$rm \"$cfgfile\"; exit 1" 1 2 15 $rm -f "$cfgfile" AC_MSG_NOTICE([creating $ofile])], [cfgfile="$ofile"]) cat <<__EOF__ >> "$cfgfile" ifelse([$1], [], [#! $SHELL # `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 # Free Software Foundation, Inc. # # This file is part of GNU Libtool: # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # A sed program that does not truncate output. SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="$SED -e 1s/^X//" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # The names of the tagged configurations supported by this script. available_tags= # ### BEGIN LIBTOOL CONFIG], [# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) # Whether or not to disallow shared libs when runtime libs are static allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # A C compiler. LTCC=$lt_LTCC # LTCC compiler flags. LTCFLAGS=$lt_LTCFLAGS # A language-specific compiler. CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) # Is the compiler the GNU C compiler? with_gcc=$_LT_AC_TAGVAR(GCC, $1) # An ERE matcher. EGREP=$lt_EGREP # The linker used to build libraries. LD=$lt_[]_LT_AC_TAGVAR(LD, $1) # Whether we need hard or soft links. LN_S=$lt_LN_S # A BSD-compatible nm program. NM=$lt_NM # A symbol stripping program STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD # Used on cygwin: DLL creation program. DLLTOOL="$DLLTOOL" # Used on cygwin: object dumper. OBJDUMP="$OBJDUMP" # Used on cygwin: assembler. AS="$AS" # The name of the directory that contains temporary libtool files. objdir=$objdir # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) # Object file suffix (normally "o"). objext="$ac_objext" # Old archive suffix (normally "a"). libext="$libext" # Shared library suffix (normally ".so"). shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) pic_mode=$pic_mode # What is the maximum length of a command? max_cmd_len=$lt_cv_sys_max_cmd_len # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) # Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) # Compiler flag to generate thread-safe objects. thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) # Library versioning type. version_type=$version_type # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Commands used to build and install an old-style archive. RANLIB=$lt_RANLIB old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) # Commands used to build and install a shared archive. archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) postinstall_cmds=$lt_postinstall_cmds postuninstall_cmds=$lt_postuninstall_cmds # Commands used to build a loadable module (assumed same as above if empty) module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # Dependencies to place before the objects being linked to create a # shared library. predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) # Dependencies to place after the objects being linked to create a # shared library. postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) # Dependencies to place before the objects being linked to create a # shared library. predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) # Dependencies to place after the objects being linked to create a # shared library. postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) # The directories searched by this compiler when creating a shared # library compiler_lib_search_dirs=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_dirs, $1) # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == file_magic. file_magic_cmd=$lt_file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) # Flag that forces no undefined symbols. no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # Same as above, but a single script fragment to be evaled but not shown. finish_eval=$lt_finish_eval # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. runpath_var=$runpath_var # This is the shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) # Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the # resulting binary. hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) # Set to yes if building a shared library automatically hardcodes DIR into the library # and all subsequent libraries and executables linked against it. hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path=$lt_fix_srcfile_path # Set to yes if exported symbols are required. always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) # The commands to list exported symbols. export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) # Symbols that must always be exported. include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) ifelse([$1],[], [# ### END LIBTOOL CONFIG], [# ### END LIBTOOL TAG CONFIG: $tagname]) __EOF__ ifelse([$1],[], [ case $host_os in aix3*) cat <<\EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi EOF ;; esac # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) mv -f "$cfgfile" "$ofile" || \ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ]) else # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` if test -f "$ltmain_in"; then test -f Makefile && make "$ltmain" fi fi ])# AC_LIBTOOL_CONFIG # AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) # ------------------------------------------- AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= if test "$GCC" = yes; then _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], lt_cv_prog_compiler_rtti_exceptions, [-fno-rtti -fno-exceptions], [], [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) fi ])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE # --------------------------------- AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_REQUIRE([AC_CANONICAL_HOST]) AC_REQUIRE([LT_AC_PROG_SED]) AC_REQUIRE([AC_PROG_NM]) AC_REQUIRE([AC_OBJEXT]) # Check for command to grab the raw symbol name followed by C symbol from nm. AC_MSG_CHECKING([command to parse $NM output from $compiler object]) AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [ # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[[BCDEGRST]]' # Regexp to match symbols that can be accessed directly from C. sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' # Transform an extracted symbol line into a proper C declaration lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" # Define system-specific variables. case $host_os in aix*) symcode='[[BCDT]]' ;; cygwin* | mingw* | pw32*) symcode='[[ABCDGISTW]]' ;; hpux*) # Its linker distinguishes data from code symbols if test "$host_cpu" = ia64; then symcode='[[ABCDEGRST]]' fi lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; linux* | k*bsd*-gnu) if test "$host_cpu" = ia64; then symcode='[[ABCDGIRSTW]]' lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" fi ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; osf*) symcode='[[BCDEGQRST]]' ;; solaris*) symcode='[[BDRT]]' ;; sco3.2v5*) symcode='[[DT]]' ;; sysv4.2uw2*) symcode='[[DT]]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[[ABDT]]' ;; sysv4) symcode='[[DFNSTU]]' ;; esac # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[[ABCDGIRSTW]]' ;; esac # Try without a prefix undercore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if grep ' nm_test_var$' "$nlist" >/dev/null; then if grep ' nm_test_func$' "$nlist" >/dev/null; then cat < conftest.$ac_ext #ifdef __cplusplus extern "C" { #endif EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' cat <> conftest.$ac_ext #if defined (__STDC__) && __STDC__ # define lt_ptr_t void * #else # define lt_ptr_t char * # define const #endif /* The mapping between symbol names and symbols. */ const struct { const char *name; lt_ptr_t address; } lt_preloaded_symbols[[]] = { EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext cat <<\EOF >> conftest.$ac_ext {0, (lt_ptr_t) 0} }; #ifdef __cplusplus } #endif EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_save_LIBS="$LIBS" lt_save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS="$lt_save_LIBS" CFLAGS="$lt_save_CFLAGS" else echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD fi else echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done ]) if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then AC_MSG_RESULT(failed) else AC_MSG_RESULT(ok) fi ]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE # AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) # --------------------------------------- AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], [_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_static, $1)= AC_MSG_CHECKING([for $compiler option to produce PIC]) ifelse([$1],[CXX],[ # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | os2* | pw32*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; sysv4*MP*) if test -d /usr/nec; then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else case $host_os in aix[[4-9]]*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; darwin*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files case $cc_basename in xlc*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; esac ;; dgux*) case $cc_basename in ec++*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; ghcx*) # Green Hills C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' fi ;; aCC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac ;; *) ;; esac ;; interix*) # This is c89, which is MS Visual C++ (no shared libs) # Anyone wants to do a port? ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux* | k*bsd*-gnu) case $cc_basename in KCC*) # KAI C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; icpc* | ecpc*) # Intel C++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; pgCC* | pgcpp*) # Portland Group C++ compiler. _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; esac ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ;; *) ;; esac ;; netbsd* | netbsdelf*-gnu) ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; cxx*) # Digital/Compaq C++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) ;; esac ;; psos*) ;; solaris*) case $cc_basename in CC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; lcc*) # Lucid _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; *) ;; esac ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) case $cc_basename in CC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; vxworks*) ;; *) _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ], [ if test "$GCC" = yes; then _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no enable_shared=no ;; sysv4*MP*) if test -d /usr/nec; then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; darwin*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files case $cc_basename in xlc*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; esac ;; mingw* | cygwin* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; hpux9* | hpux10* | hpux11*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC (with -KPIC) is the default. _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; newsos6) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; linux* | k*bsd*-gnu) case $cc_basename in icc* | ecc*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; ccc*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All Alpha code is PIC. _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; *Sun\ F*) # Sun Fortran 8.3 passes all unrecognized flags to the linker _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='' ;; esac ;; esac ;; osf3* | osf4* | osf5*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All OSF/1 code is PIC. _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; rdos*) _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; solaris*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' case $cc_basename in f77* | f90* | f95*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; *) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; esac ;; sunos4*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; unicos*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; uts4*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *) _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ]) AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) # # Check to make sure the PIC flag actually works. # if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1), [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in "" | " "*) ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; esac], [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" ;; esac # # Check to make sure the static flag actually works. # wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\" AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1), $lt_tmp_static_flag, [], [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) ]) # AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) # ------------------------------------ # See if the linker supports building shared libraries. AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_REQUIRE([LT_AC_PROG_SED])dnl AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) ifelse([$1],[CXX],[ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' case $host_os in aix[[4-9]]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | grep 'GNU' > /dev/null; then _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' else _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ;; cygwin* | mingw*) _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' ;; linux* | k*bsd*-gnu) _LT_AC_TAGVAR(link_all_deplibs, $1)=no ;; *) _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] ],[ runpath_var= _LT_AC_TAGVAR(allow_undefined_flag, $1)= _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no _LT_AC_TAGVAR(archive_cmds, $1)= _LT_AC_TAGVAR(archive_expsym_cmds, $1)= _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_minus_L, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown _LT_AC_TAGVAR(hardcode_automatic, $1)=no _LT_AC_TAGVAR(module_cmds, $1)= _LT_AC_TAGVAR(module_expsym_cmds, $1)= _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list _LT_AC_TAGVAR(include_expsyms, $1)= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. dnl Note also adjust exclude_expsyms for C++ above. extract_expsyms_cmds= # Just being paranoid about ensuring that cc_basename is set. _LT_CC_BASENAME([$compiler]) case $host_os in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; esac _LT_AC_TAGVAR(ld_shlibs, $1)=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= fi supports_anon_versioning=no case `$LD -v 2>/dev/null` in *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[[3-9]]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then _LT_AC_TAGVAR(ld_shlibs, $1)=no cat <&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. EOF fi ;; amigaos*) _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we can't use # them. _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; beos*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; cygwin* | mingw* | pw32*) # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; interix[[3-9]]*) _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | k*bsd*-gnu) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then tmp_addflag= case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; *) tmp_sharedflag='-shared' ;; esac _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test $supports_anon_versioning = yes; then _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ $echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi _LT_AC_TAGVAR(link_all_deplibs, $1)=no else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then _LT_AC_TAGVAR(ld_shlibs, $1)=no cat <&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. EOF elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) _LT_AC_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; sunos4*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then runpath_var= _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(always_export_symbols, $1)=yes _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported fi ;; aix[[4-9]]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | grep 'GNU' > /dev/null; then _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' else _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_AC_TAGVAR(archive_cmds, $1)='' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes if test "$GCC" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_AC_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared libraries. _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # see comment about different semantics on the GNU ld section _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; bsdi[[45]]*) _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; cygwin* | mingw* | pw32*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' # FIXME: Should let the user specify the lib program. _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; darwin* | rhapsody*) case $host_os in rhapsody* | darwin1.[[012]]) _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' ;; *) # Darwin 1.3 on if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' else case ${MACOSX_DEPLOYMENT_TARGET} in 10.[[012]]) _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' ;; esac fi ;; esac _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_automatic, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes if test "$GCC" = yes ; then output_verbose_link_cmd='echo' _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" else case $cc_basename in xlc*) output_verbose_link_cmd='echo' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ;; *) _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac fi ;; dgux*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; freebsd1*) _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; hpux9*) if test "$GCC" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(hardcode_direct, $1)=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; hpux10*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes fi ;; hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi if test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; newsos6) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' else case $host_os in openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ;; esac fi else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; os2*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' else _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' # Both c and cxx compiler support -rpath directly _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' fi _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ;; solaris*) _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' if test "$GCC" = yes; then wlarc='${wl}' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else wlarc='' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' fi ;; esac _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4) case $host_vendor in sni) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' _LT_AC_TAGVAR(hardcode_direct, $1)=no ;; motorola) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4.3*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes _LT_AC_TAGVAR(ld_shlibs, $1)=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac fi ]) AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no # # Do we need to explicitly link libc? # case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in x|xyes) # Assume -lc should be added _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $_LT_AC_TAGVAR(archive_cmds, $1) in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. AC_MSG_CHECKING([whether -lc should be explicitly linked in]) $rm conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if AC_TRY_EVAL(ac_compile) 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) _LT_AC_TAGVAR(allow_undefined_flag, $1)= if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) then _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no else _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes fi _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $rm conftest* AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) ;; esac fi ;; esac ])# AC_LIBTOOL_PROG_LD_SHLIBS # _LT_AC_FILE_LTDLL_C # ------------------- # Be careful that the start marker always follows a newline. AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ # /* ltdll.c starts here */ # #define WIN32_LEAN_AND_MEAN # #include # #undef WIN32_LEAN_AND_MEAN # #include # # #ifndef __CYGWIN__ # # ifdef __CYGWIN32__ # # define __CYGWIN__ __CYGWIN32__ # # endif # #endif # # #ifdef __cplusplus # extern "C" { # #endif # BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); # #ifdef __cplusplus # } # #endif # # #ifdef __CYGWIN__ # #include # DECLARE_CYGWIN_DLL( DllMain ); # #endif # HINSTANCE __hDllInstance_base; # # BOOL APIENTRY # DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) # { # __hDllInstance_base = hInst; # return TRUE; # } # /* ltdll.c ends here */ ])# _LT_AC_FILE_LTDLL_C # _LT_AC_TAGVAR(VARNAME, [TAGNAME]) # --------------------------------- AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) # old names AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) # This is just to silence aclocal about the macro not being used ifelse([AC_DISABLE_FAST_INSTALL]) AC_DEFUN([LT_AC_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj, no) test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" AC_SUBST(GCJFLAGS) ]) AC_DEFUN([LT_AC_PROG_RC], [AC_CHECK_TOOL(RC, windres, no) ]) # Cheap backport of AS_EXECUTABLE_P and required macros # from Autoconf 2.59; we should not use $as_executable_p directly. # _AS_TEST_PREPARE # ---------------- m4_ifndef([_AS_TEST_PREPARE], [m4_defun([_AS_TEST_PREPARE], [if test -x / >/dev/null 2>&1; then as_executable_p='test -x' else as_executable_p='test -f' fi ])])# _AS_TEST_PREPARE # AS_EXECUTABLE_P # --------------- # Check whether a file is executable. m4_ifndef([AS_EXECUTABLE_P], [m4_defun([AS_EXECUTABLE_P], [AS_REQUIRE([_AS_TEST_PREPARE])dnl $as_executable_p $1[]dnl ])])# AS_EXECUTABLE_P # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_SED. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # # LT_AC_PROG_SED # -------------- # Check for a fully-functional sed program, that truncates # as few characters as possible. Prefer GNU sed if found. AC_DEFUN([LT_AC_PROG_SED], [AC_MSG_CHECKING([for a sed that does not truncate output]) AC_CACHE_VAL(lt_cv_path_SED, [# Loop through the user's path and test for sed and gsed. # Then use that list of sed's as ones to test for truncation. as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for lt_ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" fi done done done IFS=$as_save_IFS lt_ac_max=0 lt_ac_count=0 # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do test ! -f $lt_ac_sed && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in # Check for GNU sed and select it if it is found. if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then lt_cv_path_SED=$lt_ac_sed break fi while true; do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo >>conftest.nl $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break cmp -s conftest.out conftest.nl || break # 10000 chars as input seems more than enough test $lt_ac_count -gt 10 && break lt_ac_count=`expr $lt_ac_count + 1` if test $lt_ac_count -gt $lt_ac_max; then lt_ac_max=$lt_ac_count lt_cv_path_SED=$lt_ac_sed fi done done ]) SED=$lt_cv_path_SED AC_SUBST([SED]) AC_MSG_RESULT([$SED]) ]) # pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- # # Copyright © 2004 Scott James Remnant . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # PKG_PROG_PKG_CONFIG([MIN-VERSION]) # ---------------------------------- AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) fi if test -n "$PKG_CONFIG"; then _pkg_min_version=m4_default([$1], [0.9.0]) AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) PKG_CONFIG="" fi fi[]dnl ])# PKG_PROG_PKG_CONFIG # PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) # # Check to see whether a particular set of modules exists. Similar # to PKG_CHECK_MODULES(), but does not set variables or print errors. # # # Similar to PKG_CHECK_MODULES, make sure that the first instance of # this or PKG_CHECK_MODULES is called, or make sure to call # PKG_CHECK_EXISTS manually # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl if test -n "$PKG_CONFIG" && \ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then m4_ifval([$2], [$2], [:]) m4_ifvaln([$3], [else $3])dnl fi]) # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) # --------------------------------------------- m4_define([_PKG_CONFIG], [if test -n "$PKG_CONFIG"; then if test -n "$$1"; then pkg_cv_[]$1="$$1" else PKG_CHECK_EXISTS([$3], [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], [pkg_failed=yes]) fi else pkg_failed=untried fi[]dnl ])# _PKG_CONFIG # _PKG_SHORT_ERRORS_SUPPORTED # ----------------------------- AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi[]dnl ])# _PKG_SHORT_ERRORS_SUPPORTED # PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], # [ACTION-IF-NOT-FOUND]) # # # Note that if there is a possibility the first call to # PKG_CHECK_MODULES might not happen, you should be sure to include an # explicit call to PKG_PROG_PKG_CONFIG in your configure.ac # # # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl pkg_failed=no AC_MSG_CHECKING([for $1]) _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) _PKG_CONFIG([$1][_LIBS], [libs], [$2]) m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS and $1[]_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.]) if test $pkg_failed = yes; then _PKG_SHORT_ERRORS_SUPPORTED if test $_pkg_short_errors_supported = yes; then $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` else $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` fi # Put the nasty error message in config.log where it belongs echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD ifelse([$4], , [AC_MSG_ERROR(dnl [Package requirements ($2) were not met: $$1_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. _PKG_TEXT ])], [AC_MSG_RESULT([no]) $4]) elif test $pkg_failed = untried; then ifelse([$4], , [AC_MSG_FAILURE(dnl [The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. _PKG_TEXT To get pkg-config, see .])], [$4]) else $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS $1[]_LIBS=$pkg_cv_[]$1[]_LIBS AC_MSG_RESULT([yes]) ifelse([$3], , :, [$3]) fi[]dnl ])# PKG_CHECK_MODULES # Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.9.6])]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to # `$srcdir', `$srcdir/..', or `$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is `.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 7 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE]) AC_SUBST([$1_FALSE]) if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 8 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "GCJ", or "OBJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, [ --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH]) ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. #serial 3 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # So let's grep whole file. if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each `.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 12 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.58])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl # test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], [define([AC_PROG_CC], defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES(CXX)], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ]) ]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $1 | $1:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl install_sh=${install_sh-"$am_aux_dir/install-sh"} AC_SUBST(install_sh)]) # Copyright (C) 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 3 # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo done .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # We grep out `Entering directory' and `Leaving directory' # messages which can occur if `w' ends up in MAKEFLAGS. # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU fi # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then am__include=.include am__quote="\"" _am_result=BSD fi fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it supports --run. # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= AC_MSG_WARN([`missing' script is too old or missing]) fi ]) # Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_MKDIR_P # --------------- # Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. # # Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories # created by `make install' are always world readable, even if the # installer happens to have an overly restrictive umask (e.g. 077). # This was a mistake. There are at least two reasons why we must not # use `-m 0755': # - it causes special bits like SGID to be ignored, # - it may be too restrictive (some setups expect 775 directories). # # Do not use -m 0755 and let people choose whatever they expect by # setting umask. # # We cannot accept any implementation of `mkdir' that recognizes `-p'. # Some implementations (such as Solaris 8's) are not thread-safe: if a # parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' # concurrently, both version can detect that a/ is missing, but only # one can create it and the other will error out. Consequently we # restrict ourselves to GNU make (using the --version option ensures # this.) AC_DEFUN([AM_PROG_MKDIR_P], [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then # We used to keeping the `.' as first argument, in order to # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) # where $(somedir) is conditionally defined. However this is wrong # for two reasons: # 1. if the package is installed by a user who cannot write `.' # make install will fail, # 2. the above comment should most certainly read # $(mkdir_p) $(DESTDIR)$(somedir) # so it does not work when $(somedir) is undefined and # $(DESTDIR) is not. # To support the latter case, we have to write # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), # so the `.' trick is pointless. mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as # directories to create, and then abort because `.' already # exists. for d in ./-p ./--version; do test -d $d && rmdir $d done # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. if test -f "$ac_aux_dir/mkinstalldirs"; then mkdir_p='$(mkinstalldirs)' else mkdir_p='$(install_sh) -d' fi fi AC_SUBST([mkdir_p])]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 3 # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # ------------------------------ # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) # _AM_SET_OPTIONS(OPTIONS) # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor `install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in `make install-strip', and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be `maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of `v7', `ustar', or `pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. AM_MISSING_PROG([AMTAR], [tar]) m4_if([$1], [v7], [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], [m4_case([$1], [ustar],, [pax],, [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' _am_tools=${am_cv_prog_tar_$1-$_am_tools} # Do not fold the above two line into one, because Tru64 sh and # Solaris sh will not grok spaces in the rhs of `-'. for _am_tool in $_am_tools do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR ussp-push-0.11.orig/config.guess0000755000175000017500000012753411054344465016535 0ustar hendrikhendrik#! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 # Free Software Foundation, Inc. timestamp='2008-01-23' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA # 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Per Bothner . # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # # The plan is that this can be called by configure scripts if you # don't specify an explicit build system type. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system \`$me' is run on. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi trap 'exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; dummy=$tmp/dummy ; tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; case $CC_FOR_BUILD,$HOST_CC,$CC in ,,) echo "int x;" > $dummy.c ; for c in cc gcc c89 c99 ; do if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac ; set_cc_for_build= ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ /usr/sbin/$sysctl 2>/dev/null || echo unknown)` case "${UNAME_MACHINE_ARCH}" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; sh5el) machine=sh5le-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently, or will in the future. case "${UNAME_MACHINE_ARCH}" in arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep __ELF__ >/dev/null then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need # kernel version information, so it can be replaced with a # suitable tag, in the style of linux-gnu. case "${UNAME_VERSION}" in Debian*) release='-gnu' ;; *) release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit ;; *:OpenBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} exit ;; *:ekkoBSD:*:*) echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} exit ;; *:SolidBSD:*:*) echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} exit ;; macppc:MirBSD:*:*) echo powerpc-unknown-mirbsd${UNAME_RELEASE} exit ;; *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} exit ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ;; *5.*) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ;; esac # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU # types through head -n 1, so we only detect the type of CPU 0. ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case "$ALPHA_CPU_TYPE" in "EV4 (21064)") UNAME_MACHINE="alpha" ;; "EV4.5 (21064)") UNAME_MACHINE="alpha" ;; "LCA4 (21066/21068)") UNAME_MACHINE="alpha" ;; "EV5 (21164)") UNAME_MACHINE="alphaev5" ;; "EV5.6 (21164A)") UNAME_MACHINE="alphaev56" ;; "EV5.6 (21164PC)") UNAME_MACHINE="alphapca56" ;; "EV5.7 (21164PC)") UNAME_MACHINE="alphapca57" ;; "EV6 (21264)") UNAME_MACHINE="alphaev6" ;; "EV6.7 (21264A)") UNAME_MACHINE="alphaev67" ;; "EV6.8CB (21264C)") UNAME_MACHINE="alphaev68" ;; "EV6.8AL (21264B)") UNAME_MACHINE="alphaev68" ;; "EV6.8CX (21264D)") UNAME_MACHINE="alphaev68" ;; "EV6.9A (21264/EV69A)") UNAME_MACHINE="alphaev69" ;; "EV7 (21364)") UNAME_MACHINE="alphaev7" ;; "EV7.9 (21364A)") UNAME_MACHINE="alphaev79" ;; esac # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` exit ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix exit ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 exit ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit ;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos exit ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos exit ;; *:OS/390:*:*) echo i370-ibm-openedition exit ;; *:z/VM:*:*) echo s390-ibm-zvmoe exit ;; *:OS400:*:*) echo powerpc-ibm-os400 exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit ;; arm:riscos:*:*|arm:RISCOS:*:*) echo arm-unknown-riscos exit ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit ;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 exit ;; DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) case `/usr/bin/uname -p` in sparc) echo sparc-icl-nx7; exit ;; esac ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` exit ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos${UNAME_RELEASE} ;; sun4) echo sparc-sun-sunos${UNAME_RELEASE} ;; esac exit ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} exit ;; m68k:machten:*:*) echo m68k-apple-machten${UNAME_RELEASE} exit ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} exit ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} exit ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && SYSTEM_NAME=`$dummy $dummyarg` && { echo "$SYSTEM_NAME"; exit; } echo mips-mips-riscos${UNAME_RELEASE} exit ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax exit ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax exit ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ [ ${TARGET_BINARY_INTERFACE}x = x ] then echo m88k-dg-dgux${UNAME_RELEASE} else echo m88k-dg-dguxbcs${UNAME_RELEASE} fi else echo i586-dg-dgux${UNAME_RELEASE} fi exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` exit ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix exit ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} exit ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` then echo "$SYSTEM_NAME" else echo rs6000-ibm-aix3.2.5 fi elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit ;; *:AIX:*:[456]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit ;; *:AIX:*:*) echo rs6000-ibm-aix exit ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "${sc_kernel_bits}" in 32) HP_ARCH="hppa2.0n" ;; 64) HP_ARCH="hppa2.0w" ;; '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 esac ;; esac fi if [ "${HP_ARCH}" = "" ]; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac if [ ${HP_ARCH} = "hppa2.0w" ] then eval $set_cc_for_build # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler # generating 64-bit code. GNU and HP use different nomenclature: # # $ CC_FOR_BUILD=cc ./config.guess # => hppa2.0w-hp-hpux11.23 # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess # => hppa64-hp-hpux11.23 if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | grep __LP64__ >/dev/null then HP_ARCH="hppa2.0w" else HP_ARCH="hppa64" fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} exit ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } echo unknown-hitachi-hiuxwe2 exit ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd exit ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi exit ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; *:UNICOS/mp:*:*) echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; 5000:UNIX_System_V:4.*:*) FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} exit ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit ;; *:FreeBSD:*:*) case ${UNAME_MACHINE} in pc98) echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; amd64) echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; *) echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; esac exit ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit ;; *:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; i*:windows32*:*) # uname -m includes "-pc" on this system. echo ${UNAME_MACHINE}-mingw32 exit ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; *:Interix*:[3456]*) case ${UNAME_MACHINE} in x86) echo i586-pc-interix${UNAME_RELEASE} exit ;; EM64T | authenticamd) echo x86_64-unknown-interix${UNAME_RELEASE} exit ;; IA64) echo ia64-unknown-interix${UNAME_RELEASE} exit ;; esac ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i586-pc-interix exit ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit ;; amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) echo x86_64-unknown-cygwin exit ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin exit ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; *:GNU:*:*) # the GNU system echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit ;; *:GNU/*:*:*) # other systems with GNU libc and userland echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu exit ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit ;; arm*:Linux:*:*) eval $set_cc_for_build if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_EABI__ then echo ${UNAME_MACHINE}-unknown-linux-gnu else echo ${UNAME_MACHINE}-unknown-linux-gnueabi fi exit ;; avr32*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; cris:Linux:*:*) echo cris-axis-linux-gnu exit ;; crisv32:Linux:*:*) echo crisv32-axis-linux-gnu exit ;; frv:Linux:*:*) echo frv-unknown-linux-gnu exit ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m32r*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; mips:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef mips #undef mipsel #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=mipsel #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=mips #else CPU= #endif #endif EOF eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' /^CPU/{ s: ::g p }'`" test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; mips64:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef mips64 #undef mips64el #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=mips64el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=mips64 #else CPU= #endif #endif EOF eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' /^CPU/{ s: ::g p }'`" test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; or32:Linux:*:*) echo or32-unknown-linux-gnu exit ;; ppc:Linux:*:*) echo powerpc-unknown-linux-gnu exit ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-gnu exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) echo hppa1.1-unknown-linux-gnu ;; PA8*) echo hppa2.0-unknown-linux-gnu ;; *) echo hppa-unknown-linux-gnu ;; esac exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-gnu exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux exit ;; sh64*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; vax:Linux:*:*) echo ${UNAME_MACHINE}-dec-linux-gnu exit ;; x86_64:Linux:*:*) echo x86_64-unknown-linux-gnu exit ;; xtensa*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; i*86:Linux:*:*) # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent # problems with other programs or directories called `ld' in the path. # Set LC_ALL=C to ensure ld outputs messages in English. ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ | sed -ne '/supported targets:/!d s/[ ][ ]*/ /g s/.*supported targets: *// s/ .*// p'` case "$ld_supported_targets" in elf32-i386) TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" ;; a.out-i386-linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" exit ;; coff-i386) echo "${UNAME_MACHINE}-pc-linux-gnucoff" exit ;; "") # Either a pre-BFD a.out linker (linux-gnuoldld) or # one that does not give us useful --help. echo "${UNAME_MACHINE}-pc-linux-gnuoldld" exit ;; esac # Determine whether the default compiler is a.out or elf eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include #ifdef __ELF__ # ifdef __GLIBC__ # if __GLIBC__ >= 2 LIBC=gnu # else LIBC=gnulibc1 # endif # else LIBC=gnulibc1 # endif #else #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) LIBC=gnu #else LIBC=gnuaout #endif #endif #ifdef __dietlibc__ LIBC=dietlibc #endif EOF eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' /^LIBC/{ s: ::g p }'`" test x"${LIBC}" != x && { echo "${UNAME_MACHINE}-pc-linux-${LIBC}" exit } test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 exit ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx exit ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop exit ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos exit ;; i*86:syllable:*:*) echo ${UNAME_MACHINE}-pc-syllable exit ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp exit ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi exit ;; i*86:*:5:[678]*) # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} exit ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i386. echo i386-pc-msdosdjgpp exit ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit ;; paragon:*:*:*) echo i860-intel-osf1 exit ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi exit ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv exit ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix exit ;; M68*:*:R3V[5678]*:*) test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 exit ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo ${UNAME_MACHINE}-sni-sysv4 else echo ns32k-sni-sysv fi exit ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 exit ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit ;; i*86:VOS:*:*) # From Paul.Green@stratus.com. echo ${UNAME_MACHINE}-stratus-vos exit ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos exit ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos exit ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} exit ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit ;; SX-7:SUPER-UX:*:*) echo sx7-nec-superux${UNAME_RELEASE} exit ;; SX-8:SUPER-UX:*:*) echo sx8-nec-superux${UNAME_RELEASE} exit ;; SX-8R:SUPER-UX:*:*) echo sx8r-nec-superux${UNAME_RELEASE} exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit ;; *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown case $UNAME_PROCESSOR in unknown) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = "x86"; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} exit ;; *:QNX:*:4*) echo i386-pc-qnx exit ;; NSE-?:NONSTOP_KERNEL:*:*) echo nse-tandem-nsk${UNAME_RELEASE} exit ;; NSR-?:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} exit ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux exit ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv exit ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} exit ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "$cputype" = "386"; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 exit ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit ;; *:TENEX:*:*) echo pdp10-unknown-tenex exit ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 exit ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 exit ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 exit ;; *:ITS:*:*) echo pdp10-unknown-its exit ;; SEI:*:*:SEIUX) echo mips-sei-seiux${UNAME_RELEASE} exit ;; *:DragonFly:*:*) echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit ;; *:*VMS:*:*) UNAME_MACHINE=`(uname -p) 2>/dev/null` case "${UNAME_MACHINE}" in A*) echo alpha-dec-vms ; exit ;; I*) echo ia64-dec-vms ; exit ;; V*) echo vax-dec-vms ; exit ;; esac ;; *:XENIX:*:SysV) echo i386-pc-xenix exit ;; i*86:skyos:*:*) echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' exit ;; i*86:rdos:*:*) echo ${UNAME_MACHINE}-pc-rdos exit ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 eval $set_cc_for_build cat >$dummy.c < # include #endif main () { #if defined (sony) #if defined (MIPSEB) /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, I don't know.... */ printf ("mips-sony-bsd\n"); exit (0); #else #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 "4" #else "" #endif ); exit (0); #endif #endif #if defined (__arm) && defined (__acorn) && defined (__unix) printf ("arm-acorn-riscix\n"); exit (0); #endif #if defined (hp300) && !defined (hpux) printf ("m68k-hp-bsd\n"); exit (0); #endif #if defined (NeXT) #if !defined (__ARCHITECTURE__) #define __ARCHITECTURE__ "m68k" #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; if (version < 4) printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); else printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); exit (0); #endif #if defined (MULTIMAX) || defined (n16) #if defined (UMAXV) printf ("ns32k-encore-sysv\n"); exit (0); #else #if defined (CMU) printf ("ns32k-encore-mach\n"); exit (0); #else printf ("ns32k-encore-bsd\n"); exit (0); #endif #endif #endif #if defined (__386BSD__) printf ("i386-pc-bsd\n"); exit (0); #endif #if defined (sequent) #if defined (i386) printf ("i386-sequent-dynix\n"); exit (0); #endif #if defined (ns32000) printf ("ns32k-sequent-dynix\n"); exit (0); #endif #endif #if defined (_SEQUENT_) struct utsname un; uname(&un); if (strncmp(un.version, "V2", 2) == 0) { printf ("i386-sequent-ptx2\n"); exit (0); } if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ printf ("i386-sequent-ptx1\n"); exit (0); } printf ("i386-sequent-ptx\n"); exit (0); #endif #if defined (vax) # if !defined (ultrix) # include # if defined (BSD) # if BSD == 43 printf ("vax-dec-bsd4.3\n"); exit (0); # else # if BSD == 199006 printf ("vax-dec-bsd4.3reno\n"); exit (0); # else printf ("vax-dec-bsd\n"); exit (0); # endif # endif # else printf ("vax-dec-bsd\n"); exit (0); # endif # else printf ("vax-dec-ultrix\n"); exit (0); # endif #endif #if defined (alliant) && defined (i860) printf ("i860-alliant-bsd\n"); exit (0); #endif exit (1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } # Apollos put the system type in the environment. test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } # Convex versions that predate uname can use getsysinfo(1) if [ -x /usr/convex/getsysinfo ] then case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd exit ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; c34*) echo c34-convex-bsd exit ;; c38*) echo c38-convex-bsd exit ;; c4*) echo c4-convex-bsd exit ;; esac fi cat >&2 < in order to provide the needed information to handle your system. config.guess timestamp = $timestamp uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = ${UNAME_MACHINE} UNAME_RELEASE = ${UNAME_RELEASE} UNAME_SYSTEM = ${UNAME_SYSTEM} UNAME_VERSION = ${UNAME_VERSION} EOF exit 1 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: ussp-push-0.11.orig/config.sub0000755000175000017500000010115311054344465016165 0ustar hendrikhendrik#! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 # Free Software Foundation, Inc. timestamp='2008-01-16' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software # can handle that machine. It does not imply ALL GNU software can. # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA # 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS $0 [OPTION] ALIAS Canonicalize a configuration name. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" exit 1 ;; *local*) # First pass through any local machine types. echo $1 exit ;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; *) basic_machine=`echo $1 | sed 's/-[^-]*$//'` if [ $basic_machine != $1 ] then os=`echo $1 | sed 's/.*-/-/'` else os=; fi ;; esac ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -apple | -axis | -knuth | -cray) os= basic_machine=$1 ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 ;; -scout) ;; -wrs) os=-vxworks basic_machine=$1 ;; -chorusos*) os=-chorusos basic_machine=$1 ;; -chorusrdb) os=-chorusrdb basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco6) os=-sco5v6 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5) os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5v6*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -udk*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ;; -windowsnt*) os=`echo $os | sed -e 's/windowsnt/winnt/'` ;; -psos*) os=-psos ;; -mint | -mint[0-9]*) basic_machine=m68k-atari os=-mint ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. 1750a | 580 \ | a29k \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ | bfin \ | c4x | clipper \ | d10v | d30v | dlx | dsp16xx \ | fido | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ | m32c | m32r | m32rle | m68000 | m68k | m88k \ | maxq | mb | microblaze | mcore | mep \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ | mips64vr | mips64vrel \ | mips64orion | mips64orionel \ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ | mips64vr5900 | mips64vr5900el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa64 | mipsisa64el \ | mipsisa64r2 | mipsisa64r2el \ | mipsisa64sb1 | mipsisa64sb1el \ | mipsisa64sr71k | mipsisa64sr71kel \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ | mt \ | msp430 \ | nios | nios2 \ | ns16k | ns32k \ | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ | score \ | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ | spu | strongarm \ | tahoe | thumb | tic4x | tic80 | tron \ | v850 | v850e \ | we32k \ | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ | z8k) basic_machine=$basic_machine-unknown ;; m6811 | m68hc11 | m6812 | m68hc12) # Motorola 68HC11/12. basic_machine=$basic_machine-unknown os=-none ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ;; ms1) basic_machine=mt-unknown ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. 580-* \ | a29k-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* | avr32-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ | ip2k-* | iq2000-* \ | m32c-* | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | maxq-* | mcore-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ | mips64vr-* | mips64vrel-* \ | mips64orion-* | mips64orionel-* \ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ | mips64vr5900-* | mips64vr5900el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa64-* | mipsisa64el-* \ | mipsisa64r2-* | mipsisa64r2el-* \ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipstx39-* | mipstx39el-* \ | mmix-* \ | mt-* \ | msp430-* \ | nios-* | nios2-* \ | none-* | np1-* | ns16k-* | ns32k-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ | romp-* | rs6000-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ | tahoe-* | thumb-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tron-* \ | v850-* | v850e-* | vax-* \ | we32k-* \ | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ | xstormy16-* | xtensa*-* \ | ymp-* \ | z8k-*) ;; # Recognize the basic CPU types without company name, with glob match. xtensa*) basic_machine=$basic_machine-unknown ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) basic_machine=i386-unknown os=-bsd ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; a29khif) basic_machine=a29k-amd os=-udi ;; abacus) basic_machine=abacus-unknown ;; adobe68k) basic_machine=m68010-adobe os=-scout ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amd64) basic_machine=x86_64-pc ;; amd64-*) basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-unknown ;; amigaos | amigados) basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) basic_machine=m68k-unknown os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; apollo68bsd) basic_machine=m68k-apollo os=-bsd ;; aux) basic_machine=m68k-apple os=-aux ;; balance) basic_machine=ns32k-sequent os=-dynix ;; blackfin) basic_machine=bfin-unknown os=-linux ;; blackfin-*) basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; c90) basic_machine=c90-cray os=-unicos ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | j90) basic_machine=j90-cray os=-unicos ;; craynv) basic_machine=craynv-cray os=-unicosmp ;; cr16) basic_machine=cr16-unknown os=-elf ;; crds | unos) basic_machine=m68k-crds ;; crisv32 | crisv32-* | etraxfs*) basic_machine=crisv32-axis ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; crx) basic_machine=crx-unknown os=-elf ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; decsystem10* | dec10*) basic_machine=pdp10-dec os=-tops10 ;; decsystem20* | dec20*) basic_machine=pdp10-dec os=-tops20 ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; djgpp) basic_machine=i586-pc os=-msdosdjgpp ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2* | dpx2*-bull) basic_machine=m68k-bull os=-sysv3 ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson os=-ose ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; go32) basic_machine=i386-pc os=-go32 ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; h8300xray) basic_machine=h8300-hitachi os=-xray ;; h8500hms) basic_machine=h8500-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) basic_machine=hppa1.1-hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; hppa-next) os=-nextstep3 ;; hppaosf) basic_machine=hppa1.1-hp os=-osf ;; hppro) basic_machine=hppa1.1-hp os=-proelf ;; i370-ibm* | ibm*) basic_machine=i370-ibm ;; # I'm not sure what "Sysv32" means. Should this be sysv3.2? i*86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i*86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i*86v) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv ;; i*86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; i386mach) basic_machine=i386-mach os=-mach ;; i386-vsta | vsta) basic_machine=i386-unknown os=-vsta ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; m68knommu) basic_machine=m68k-unknown os=-linux ;; m68knommu-*) basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; m88k-omron*) basic_machine=m88k-omron ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; mingw32) basic_machine=i386-pc os=-mingw32 ;; mingw32ce) basic_machine=arm-unknown os=-mingw32ce ;; miniframe) basic_machine=m68000-convergent ;; *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) basic_machine=m68k-atari os=-mint ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; monitor) basic_machine=m68k-rom68k os=-coff ;; morphos) basic_machine=powerpc-unknown os=-morphos ;; msdos) basic_machine=i386-pc os=-msdos ;; ms1-*) basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` ;; mvs) basic_machine=i370-ibm os=-mvs ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; netbsd386) basic_machine=i386-unknown os=-netbsd ;; netwinder) basic_machine=armv4l-rebel os=-linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; necv70) basic_machine=v70-nec os=-sysv ;; next | m*-next ) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; mon960) basic_machine=i960-intel os=-mon960 ;; nonstopux) basic_machine=mips-compaq os=-nonstopux ;; np1) basic_machine=np1-gould ;; nsr-tandem) basic_machine=nsr-tandem ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf ;; openrisc | openrisc-*) basic_machine=or32-unknown ;; os400) basic_machine=powerpc-ibm os=-os400 ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose ;; os68k) basic_machine=m68k-none os=-os68k ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; parisc) basic_machine=hppa-unknown os=-linux ;; parisc-*) basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pc98) basic_machine=i386-pc ;; pc98-*) basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; pentiumpro | p6 | 6x86 | athlon | athlon_*) basic_machine=i686-pc ;; pentiumii | pentium2 | pentiumiii | pentium3) basic_machine=i686-pc ;; pentium4) basic_machine=i786-pc ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium4-*) basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc) basic_machine=powerpc-unknown ;; ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little | ppc64-le | powerpc64-little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; pw32) basic_machine=i586-unknown os=-pw32 ;; rdos) basic_machine=i386-pc os=-rdos ;; rom68k) basic_machine=m68k-rom68k os=-coff ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; s390 | s390-*) basic_machine=s390-ibm ;; s390x | s390x-*) basic_machine=s390x-ibm ;; sa29200) basic_machine=a29k-amd os=-udi ;; sb1) basic_machine=mipsisa64sb1-unknown ;; sb1el) basic_machine=mipsisa64sb1el-unknown ;; sde) basic_machine=mipsisa32-sde os=-elf ;; sei) basic_machine=mips-sei os=-seiux ;; sequent) basic_machine=i386-sequent ;; sh) basic_machine=sh-hitachi os=-hms ;; sh5el) basic_machine=sh5le-unknown ;; sh64) basic_machine=sh64-unknown ;; sparclite-wrs | simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; st2000) basic_machine=m68k-tandem ;; stratus) basic_machine=i860-stratus os=-sysv4 ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; sv1) basic_machine=sv1-cray os=-unicos ;; symmetry) basic_machine=i386-sequent os=-dynix ;; t3e) basic_machine=alphaev5-cray os=-unicos ;; t90) basic_machine=t90-cray os=-unicos ;; tic54x | c54x*) basic_machine=tic54x-unknown os=-coff ;; tic55x | c55x*) basic_machine=tic55x-unknown os=-coff ;; tic6x | c6x*) basic_machine=tic6x-unknown os=-coff ;; tile*) basic_machine=tile-unknown os=-linux-gnu ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; toad1) basic_machine=pdp10-xkl os=-tops20 ;; tower | tower-32) basic_machine=m68k-ncr ;; tpf) basic_machine=s390x-ibm os=-tpf ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; v810 | necv810) basic_machine=v810-nec os=-none ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vpp*|vx|vx-*) basic_machine=f301-fujitsu ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; w65*) basic_machine=w65-wdc os=-none ;; w89k-*) basic_machine=hppa1.1-winbond os=-proelf ;; xbox) basic_machine=i686-pc os=-mingw32 ;; xps | xps100) basic_machine=xps100-honeywell ;; ymp) basic_machine=ymp-cray os=-unicos ;; z8k-*-coff) basic_machine=z8k-unknown os=-sim ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) basic_machine=hppa1.1-winbond ;; op50n) basic_machine=hppa1.1-oki ;; op60c) basic_machine=hppa1.1-oki ;; romp) basic_machine=romp-ibm ;; mmix) basic_machine=mmix-knuth ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp10) # there are many clones, so DEC is not a safe bet basic_machine=pdp10-unknown ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) basic_machine=sparc-sun ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; mac | mpw | mac-mpw) basic_machine=m68k-apple ;; pmac | pmac-mpw) basic_machine=powerpc-apple ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -svr4*) os=-sysv4 ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; # First accept the basic system types. # The portable systems comes first. # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ | -openbsd* | -solidbsd* \ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ | -skyos* | -haiku* | -rdos* | -toppers* | -drops*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) case $basic_machine in x86-* | i*86-*) ;; *) os=-nto$os ;; esac ;; -nto-qnx*) ;; -nto*) os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo $os | sed -e 's|mac|macos|'` ;; -linux-dietlibc) os=-linux-dietlibc ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) os=`echo $os | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; -opened*) os=-openedition ;; -os400*) os=-os400 ;; -wince*) os=-wince ;; -osfrose*) os=-osfrose ;; -osf*) os=-osf ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -atheos*) os=-atheos ;; -syllable*) os=-syllable ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; -nova*) os=-rtmk-nova ;; -ns2 ) os=-nextstep2 ;; -nsk*) os=-nsk ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -tpf*) os=-tpf ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -ose*) os=-ose ;; -es1800*) os=-ose ;; -xenix) os=-xenix ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; -aros*) os=-aros ;; -kaos*) os=-kaos ;; -zvmoe) os=-zvmoe ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in score-*) os=-elf ;; spu-*) os=-elf ;; *-acorn) os=-riscix1.2 ;; arm*-rebel) os=-linux ;; arm*-semi) os=-aout ;; c4x-* | tic4x-*) os=-coff ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 # This also exists in the configure program, but was not the # default. # os=-sunos4 ;; m68*-cisco) os=-aout ;; mep-*) os=-elf ;; mips*-cisco) os=-elf ;; mips*-*) os=-elf ;; or32-*) os=-coff ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; *-be) os=-beos ;; *-haiku) os=-haiku ;; *-ibm) os=-aix ;; *-knuth) os=-mmixware ;; *-wec) os=-proelf ;; *-winbond) os=-proelf ;; *-oki) os=-proelf ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigaos ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-next ) os=-nextstep ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-next) os=-nextstep3 ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; *-rom68k) os=-coff ;; *-*bug) os=-coff ;; *-apple) os=-macos ;; *-atari*) os=-mint ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -aix*) vendor=ibm ;; -beos*) vendor=be ;; -hpux*) vendor=hp ;; -mpeix*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs* | -opened*) vendor=ibm ;; -os400*) vendor=ibm ;; -ptx*) vendor=sequent ;; -tpf*) vendor=ibm ;; -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; -aux*) vendor=apple ;; -hms*) vendor=hitachi ;; -mpw* | -macos*) vendor=apple ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; -vos*) vendor=stratus ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; esac echo $basic_machine$os exit # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: ussp-push-0.11.orig/ltmain.sh0000644000175000017500000060646011054344465016035 0ustar hendrikhendrik# ltmain.sh - Provide generalized library-building support services. # NOTE: Changing this file will not affect anything until you rerun configure. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, # 2007, 2008 Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. basename="s,^.*/,,g" # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh # is ksh but when the shell is invoked as "sh" and the current value of # the _XPG environment variable is not equal to 1 (one), the special # positional parameter $0, within a function call, is the name of the # function. progpath="$0" # The name of this program: progname=`echo "$progpath" | $SED $basename` modename="$progname" # Global variables: EXIT_SUCCESS=0 EXIT_FAILURE=1 PROGRAM=ltmain.sh PACKAGE=libtool VERSION="1.5.26 Debian 1.5.26-1" TIMESTAMP=" (1.1220.2.493 2008/02/01 16:58:18)" # Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # Check that we have a working $echo. if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X$1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then # Yippee, $echo works! : else # Restart under the correct shell, and then maybe $echo will work. exec $SHELL "$progpath" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then # used as fallback echo shift cat <&2 $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 exit $EXIT_FAILURE fi # Global variables. mode=$default_mode nonopt= prev= prevopt= run= show="$echo" show_help= execute_dlfiles= duplicate_deps=no preserve_args= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" extracted_archives= extracted_serial=0 ##################################### # Shell function definitions: # This seems to be the best place for them # func_mktempdir [string] # Make a temporary directory that won't clash with other running # libtool processes, and avoids race conditions if possible. If # given, STRING is the basename for that directory. func_mktempdir () { my_template="${TMPDIR-/tmp}/${1-$progname}" if test "$run" = ":"; then # Return a directory name, but don't create it in dry-run mode my_tmpdir="${my_template}-$$" else # If mktemp works, use that first and foremost my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` if test ! -d "$my_tmpdir"; then # Failing that, at least try and use $RANDOM to avoid a race my_tmpdir="${my_template}-${RANDOM-0}$$" save_mktempdir_umask=`umask` umask 0077 $mkdir "$my_tmpdir" umask $save_mktempdir_umask fi # If we're not in dry-run mode, bomb out on failure test -d "$my_tmpdir" || { $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2 exit $EXIT_FAILURE } fi $echo "X$my_tmpdir" | $Xsed } # func_win32_libid arg # return the library type of file 'arg' # # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. func_win32_libid () { win32_libid_type="unknown" win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in *ar\ archive\ import\ library*) # definitely import win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then win32_nmres=`eval $NM -f posix -A $1 | \ $SED -n -e '1,100{ / I /{ s,.*,import, p q } }'` case $win32_nmres in import*) win32_libid_type="x86 archive import";; *) win32_libid_type="x86 archive static";; esac fi ;; *DLL*) win32_libid_type="x86 DLL" ;; *executable*) # but shell scripts are "executable" too... case $win32_fileres in *MS\ Windows\ PE\ Intel*) win32_libid_type="x86 DLL" ;; esac ;; esac $echo $win32_libid_type } # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. # Only attempt this if the compiler in the base compile # command doesn't match the default compiler. # arg is usually of the form 'gcc ...' func_infer_tag () { if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac CC_quoted="$CC_quoted $arg" done case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) for z in $available_tags; do if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac CC_quoted="$CC_quoted $arg" done case "$@ " in " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. tagname=$z break ;; esac fi done # If $tagname still isn't set, then no tagged configuration # was found and let the user know that the "--tag" command # line option must be used. if test -z "$tagname"; then $echo "$modename: unable to infer tagged configuration" $echo "$modename: specify a tag with \`--tag'" 1>&2 exit $EXIT_FAILURE # else # $echo "$modename: using $tagname tagged configuration" fi ;; esac fi } # func_extract_an_archive dir oldlib func_extract_an_archive () { f_ex_an_ar_dir="$1"; shift f_ex_an_ar_oldlib="$1" $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 exit $EXIT_FAILURE fi } # func_extract_archives gentop oldlib ... func_extract_archives () { my_gentop="$1"; shift my_oldlibs=${1+"$@"} my_oldobjs="" my_xlib="" my_xabs="" my_xdir="" my_status="" $show "${rm}r $my_gentop" $run ${rm}r "$my_gentop" $show "$mkdir $my_gentop" $run $mkdir "$my_gentop" my_status=$? if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then exit $my_status fi for my_xlib in $my_oldlibs; do # Extract the objects. case $my_xlib in [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; *) my_xabs=`pwd`"/$my_xlib" ;; esac my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` my_xlib_u=$my_xlib while :; do case " $extracted_archives " in *" $my_xlib_u "*) extracted_serial=`expr $extracted_serial + 1` my_xlib_u=lt$extracted_serial-$my_xlib ;; *) break ;; esac done extracted_archives="$extracted_archives $my_xlib_u" my_xdir="$my_gentop/$my_xlib_u" $show "${rm}r $my_xdir" $run ${rm}r "$my_xdir" $show "$mkdir $my_xdir" $run $mkdir "$my_xdir" exit_status=$? if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then exit $exit_status fi case $host in *-darwin*) $show "Extracting $my_xabs" # Do not bother doing anything if just a dry run if test -z "$run"; then darwin_orig_dir=`pwd` cd $my_xdir || exit $? darwin_archive=$my_xabs darwin_curdir=`pwd` darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` if test -n "$darwin_arches"; then darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` darwin_arch= $show "$darwin_base_archive has multiple architectures $darwin_arches" for darwin_arch in $darwin_arches ; do mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" func_extract_an_archive "`pwd`" "${darwin_base_archive}" cd "$darwin_curdir" $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" done # $darwin_arches ## Okay now we have a bunch of thin objects, gotta fatten them up :) darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` darwin_file= darwin_files= for darwin_file in $darwin_filelist; do darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` lipo -create -output "$darwin_file" $darwin_files done # $darwin_filelist ${rm}r unfat-$$ cd "$darwin_orig_dir" else cd "$darwin_orig_dir" func_extract_an_archive "$my_xdir" "$my_xabs" fi # $darwin_arches fi # $run ;; *) func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` done func_extract_archives_result="$my_oldobjs" } # End of Shell function definitions ##################################### # Darwin sucks eval std_shrext=\"$shrext_cmds\" disable_libs=no # Parse our command line options once, thoroughly. while test "$#" -gt 0 do arg="$1" shift case $arg in -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; *) optarg= ;; esac # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in execute_dlfiles) execute_dlfiles="$execute_dlfiles $arg" ;; tag) tagname="$arg" preserve_args="${preserve_args}=$arg" # Check whether tagname contains only valid characters case $tagname in *[!-_A-Za-z0-9,/]*) $echo "$progname: invalid tag name: $tagname" 1>&2 exit $EXIT_FAILURE ;; esac case $tagname in CC) # Don't test for the "default" C tag, as we know, it's there, but # not specially marked. ;; *) if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then taglist="$taglist $tagname" # Evaluate the configuration. eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" else $echo "$progname: ignoring unknown tag $tagname" 1>&2 fi ;; esac ;; *) eval "$prev=\$arg" ;; esac prev= prevopt= continue fi # Have we seen a non-optional argument yet? case $arg in --help) show_help=yes ;; --version) echo "\ $PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP Copyright (C) 2008 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." exit $? ;; --config) ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath # Now print the configurations for the tags. for tagname in $taglist; do ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" done exit $? ;; --debug) $echo "$progname: enabling shell trace mode" set -x preserve_args="$preserve_args $arg" ;; --dry-run | -n) run=: ;; --features) $echo "host: $host" if test "$build_libtool_libs" = yes; then $echo "enable shared libraries" else $echo "disable shared libraries" fi if test "$build_old_libs" = yes; then $echo "enable static libraries" else $echo "disable static libraries" fi exit $? ;; --finish) mode="finish" ;; --mode) prevopt="--mode" prev=mode ;; --mode=*) mode="$optarg" ;; --preserve-dup-deps) duplicate_deps="yes" ;; --quiet | --silent) show=: preserve_args="$preserve_args $arg" ;; --tag) prevopt="--tag" prev=tag preserve_args="$preserve_args --tag" ;; --tag=*) set tag "$optarg" ${1+"$@"} shift prev=tag preserve_args="$preserve_args --tag" ;; -dlopen) prevopt="-dlopen" prev=execute_dlfiles ;; -*) $echo "$modename: unrecognized option \`$arg'" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE ;; *) nonopt="$arg" break ;; esac done if test -n "$prevopt"; then $echo "$modename: option \`$prevopt' requires an argument" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi case $disable_libs in no) ;; shared) build_libtool_libs=no build_old_libs=yes ;; static) build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` ;; esac # If this variable is set in any of the actions, the command in it # will be execed at the end. This prevents here-documents from being # left over by shells. exec_cmd= if test -z "$show_help"; then # Infer the operation mode. if test -z "$mode"; then $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 case $nonopt in *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) mode=link for arg do case $arg in -c) mode=compile break ;; esac done ;; *db | *dbx | *strace | *truss) mode=execute ;; *install*|cp|mv) mode=install ;; *rm) mode=uninstall ;; *) # If we have no mode, but dlfiles were specified, then do execute mode. test -n "$execute_dlfiles" && mode=execute # Just use the default operation mode. if test -z "$mode"; then if test -n "$nonopt"; then $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 else $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 fi fi ;; esac fi # Only execute mode is allowed to have -dlopen flags. if test -n "$execute_dlfiles" && test "$mode" != execute; then $echo "$modename: unrecognized option \`-dlopen'" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. generic_help="$help" help="Try \`$modename --help --mode=$mode' for more information." # These modes are in order of execution frequency so that they run quickly. case $mode in # libtool compile mode compile) modename="$modename: compile" # Get the compilation command and the source file. base_compile= srcfile="$nonopt" # always keep a non-empty value in "srcfile" suppress_opt=yes suppress_output= arg_mode=normal libobj= later= for arg do case $arg_mode in arg ) # do not "continue". Instead, add this to base_compile lastarg="$arg" arg_mode=normal ;; target ) libobj="$arg" arg_mode=normal continue ;; normal ) # Accept any command-line options. case $arg in -o) if test -n "$libobj" ; then $echo "$modename: you cannot specify \`-o' more than once" 1>&2 exit $EXIT_FAILURE fi arg_mode=target continue ;; -static | -prefer-pic | -prefer-non-pic) later="$later $arg" continue ;; -no-suppress) suppress_opt=no continue ;; -Xcompiler) arg_mode=arg # the next one goes into the "base_compile" arg list continue # The current "srcfile" will either be retained or ;; # replaced later. I would guess that would be a bug. -Wc,*) args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` lastarg= save_ifs="$IFS"; IFS=',' for arg in $args; do IFS="$save_ifs" # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac lastarg="$lastarg $arg" done IFS="$save_ifs" lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` # Add the arguments to base_compile. base_compile="$base_compile $lastarg" continue ;; * ) # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # lastarg="$srcfile" srcfile="$arg" ;; esac # case $arg ;; esac # case $arg_mode # Aesthetically quote the previous argument. lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` case $lastarg in # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly # in scan sets, and some SunOS ksh mistreat backslash-escaping # in scan sets (worked around with variable expansion), # and furthermore cannot handle '|' '&' '(' ')' in scan sets # at all, so we specify them separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") lastarg="\"$lastarg\"" ;; esac base_compile="$base_compile $lastarg" done # for arg case $arg_mode in arg) $echo "$modename: you must specify an argument for -Xcompile" exit $EXIT_FAILURE ;; target) $echo "$modename: you must specify a target with \`-o'" 1>&2 exit $EXIT_FAILURE ;; *) # Get the name of the library object. [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo xform='[cCFSifmso]' case $libobj in *.ada) xform=ada ;; *.adb) xform=adb ;; *.ads) xform=ads ;; *.asm) xform=asm ;; *.c++) xform=c++ ;; *.cc) xform=cc ;; *.ii) xform=ii ;; *.class) xform=class ;; *.cpp) xform=cpp ;; *.cxx) xform=cxx ;; *.[fF][09]?) xform=[fF][09]. ;; *.for) xform=for ;; *.java) xform=java ;; *.obj) xform=obj ;; *.sx) xform=sx ;; esac libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` case $libobj in *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; *) $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 exit $EXIT_FAILURE ;; esac func_infer_tag $base_compile for arg in $later; do case $arg in -static) build_old_libs=yes continue ;; -prefer-pic) pic_mode=yes continue ;; -prefer-non-pic) pic_mode=no continue ;; esac done qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` case $qlibobj in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") qlibobj="\"$qlibobj\"" ;; esac test "X$libobj" != "X$qlibobj" \ && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$obj"; then xdir= else xdir=$xdir/ fi lobj=${xdir}$objdir/$objname if test -z "$base_compile"; then $echo "$modename: you must specify a compilation command" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi # Delete any leftover library objects. if test "$build_old_libs" = yes; then removelist="$obj $lobj $libobj ${libobj}T" else removelist="$lobj $libobj ${libobj}T" fi $run $rm $removelist trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in cygwin* | mingw* | pw32* | os2*) pic_mode=default ;; esac if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" removelist="$removelist $output_obj $lockfile" trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 else output_obj= need_locks=no lockfile= fi # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then until $run ln "$progpath" "$lockfile" 2>/dev/null; do $show "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then $echo "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $run $rm $removelist exit $EXIT_FAILURE fi $echo "$srcfile" > "$lockfile" fi if test -n "$fix_srcfile_path"; then eval srcfile=\"$fix_srcfile_path\" fi qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` case $qsrcfile in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") qsrcfile="\"$qsrcfile\"" ;; esac $run $rm "$libobj" "${libobj}T" # Create a libtool object file (analogous to a ".la" file), # but don't create it if we're doing a dry run. test -z "$run" && cat > ${libobj}T </dev/null`" != "X$srcfile"; then $echo "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $run $rm $removelist exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then $show "$mv $output_obj $lobj" if $run $mv $output_obj $lobj; then : else error=$? $run $rm $removelist exit $error fi fi # Append the name of the PIC object to the libtool object file. test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null`" != "X$srcfile"; then $echo "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $run $rm $removelist exit $EXIT_FAILURE fi # Just move the object if needed if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then $show "$mv $output_obj $obj" if $run $mv $output_obj $obj; then : else error=$? $run $rm $removelist exit $error fi fi # Append the name of the non-PIC object the libtool object file. # Only append if the libtool object file exists. test -z "$run" && cat >> ${libobj}T <> ${libobj}T <&2 fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; -static) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=built ;; -static-libtool-libs) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; esac build_libtool_libs=no build_old_libs=yes break ;; esac done # See if our shared archives depend on static archives. test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. while test "$#" -gt 0; do arg="$1" shift case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test ;; *) qarg=$arg ;; esac libtool_args="$libtool_args $qarg" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) compile_command="$compile_command @OUTPUT@" finalize_command="$finalize_command @OUTPUT@" ;; esac case $prev in dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. compile_command="$compile_command @SYMFILE@" finalize_command="$finalize_command @SYMFILE@" preload=yes fi case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test "$dlself" = no; then dlself=needless export_dynamic=yes fi prev= continue ;; self) if test "$prev" = dlprefiles; then dlself=yes elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then dlself=yes else dlself=needless export_dynamic=yes fi prev= continue ;; *) if test "$prev" = dlfiles; then dlfiles="$dlfiles $arg" else dlprefiles="$dlprefiles $arg" fi prev= continue ;; esac ;; expsyms) export_symbols="$arg" if test ! -f "$arg"; then $echo "$modename: symbol file \`$arg' does not exist" exit $EXIT_FAILURE fi prev= continue ;; expsyms_regex) export_symbols_regex="$arg" prev= continue ;; inst_prefix) inst_prefix_dir="$arg" prev= continue ;; precious_regex) precious_files_regex="$arg" prev= continue ;; release) release="-$arg" prev= continue ;; objectlist) if test -f "$arg"; then save_arg=$arg moreargs= for fil in `cat $save_arg` do # moreargs="$moreargs $fil" arg=$fil # A libtool-controlled object. # Check to see that this really is a libtool object. if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then pic_object= non_pic_object= # Read the .lo file # If there is no directory component, then add one. case $arg in */* | *\\*) . $arg ;; *) . ./$arg ;; esac if test -z "$pic_object" || \ test -z "$non_pic_object" || test "$pic_object" = none && \ test "$non_pic_object" = none; then $echo "$modename: cannot find name of object for \`$arg'" 1>&2 exit $EXIT_FAILURE fi # Extract subdirectory from the argument. xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$arg"; then xdir= else xdir="$xdir/" fi if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then dlfiles="$dlfiles $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. dlprefiles="$dlprefiles $pic_object" prev= fi # A PIC object. libobjs="$libobjs $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object non_pic_objects="$non_pic_objects $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" non_pic_objects="$non_pic_objects $non_pic_object" fi else # Only an error if not doing a dry-run. if test -z "$run"; then $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 exit $EXIT_FAILURE else # Dry-run case. # Extract subdirectory from the argument. xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$arg"; then xdir= else xdir="$xdir/" fi pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` libobjs="$libobjs $pic_object" non_pic_objects="$non_pic_objects $non_pic_object" fi fi done else $echo "$modename: link input file \`$save_arg' does not exist" exit $EXIT_FAILURE fi arg=$save_arg prev= continue ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 exit $EXIT_FAILURE ;; esac if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; *) rpath="$rpath $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; *) xrpath="$xrpath $arg" ;; esac fi prev= continue ;; xcompiler) compiler_flags="$compiler_flags $qarg" prev= compile_command="$compile_command $qarg" finalize_command="$finalize_command $qarg" continue ;; xlinker) linker_flags="$linker_flags $qarg" compiler_flags="$compiler_flags $wl$qarg" prev= compile_command="$compile_command $wl$qarg" finalize_command="$finalize_command $wl$qarg" continue ;; xcclinker) linker_flags="$linker_flags $qarg" compiler_flags="$compiler_flags $qarg" prev= compile_command="$compile_command $qarg" finalize_command="$finalize_command $qarg" continue ;; shrext) shrext_cmds="$arg" prev= continue ;; darwin_framework|darwin_framework_skip) test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg" compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" prev= continue ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac fi # test -n "$prev" prevarg="$arg" case $arg in -all-static) if test -n "$link_static_flag"; then compile_command="$compile_command $link_static_flag" finalize_command="$finalize_command $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 continue ;; -avoid-version) avoid_version=yes continue ;; -dlopen) prev=dlfiles continue ;; -dlpreopen) prev=dlprefiles continue ;; -export-dynamic) export_dynamic=yes continue ;; -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then $echo "$modename: more than one -exported-symbols argument is not allowed" exit $EXIT_FAILURE fi if test "X$arg" = "X-export-symbols"; then prev=expsyms else prev=expsyms_regex fi continue ;; -framework|-arch|-isysroot) case " $CC " in *" ${arg} ${1} "* | *" ${arg} ${1} "*) prev=darwin_framework_skip ;; *) compiler_flags="$compiler_flags $arg" prev=darwin_framework ;; esac compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" continue ;; -inst-prefix-dir) prev=inst_prefix continue ;; # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix* | /*-*-irix*) compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" ;; esac continue ;; -L*) dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 absdir="$dir" notinst_path="$notinst_path $dir" fi dir="$absdir" ;; esac case "$deplibs " in *" -L$dir "*) ;; *) deplibs="$deplibs -L$dir" lib_search_path="$lib_search_path $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; *) dllsearchpath="$dllsearchpath:$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; *) dllsearchpath="$dllsearchpath:$testbindir";; esac ;; esac continue ;; -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) # These systems don't actually have a C or math library (as such) continue ;; *-*-os2*) # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework deplibs="$deplibs -framework System" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype test "X$arg" = "X-lc" && continue ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work test "X$arg" = "X-lc" && continue ;; esac elif test "X$arg" = "X-lc_r"; then case $host in *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc_r directly, use -pthread flag. continue ;; esac fi deplibs="$deplibs $arg" continue ;; # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. -model) compile_command="$compile_command $arg" compiler_flags="$compiler_flags $arg" finalize_command="$finalize_command $arg" prev=xcompiler continue ;; -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) compiler_flags="$compiler_flags $arg" compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" continue ;; -multi_module) single_module="${wl}-multi_module" continue ;; -module) module=yes continue ;; # -64, -mips[0-9] enable 64-bit mode on the SGI compiler # -r[0-9][0-9]* specifies the processor on the SGI compiler # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler # +DA*, +DD* enable 64-bit mode on the HP compiler # -q* pass through compiler args for the IBM compiler # -m* pass through architecture-specific compiler args for GCC # -m*, -t[45]*, -txscale* pass through architecture-specific # compiler args for GCC # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC # -F/path gives path to uninstalled frameworks, gcc on darwin # @file GCC response files -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" compiler_flags="$compiler_flags $arg" continue ;; -shrext) prev=shrext continue ;; -no-fast-install) fast_install=no continue ;; -no-install) case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*) # The PATH hackery in wrapper scripts is required on Windows # and Darwin in order for the loader to find any dlls it needs. $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 fast_install=no ;; *) no_install=yes ;; esac continue ;; -no-undefined) allow_undefined=no continue ;; -objectlist) prev=objectlist continue ;; -o) prev=output ;; -precious-files-regex) prev=precious_regex continue ;; -release) prev=release continue ;; -rpath) prev=rpath continue ;; -R) prev=xrpath continue ;; -R*) dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 exit $EXIT_FAILURE ;; esac case "$xrpath " in *" $dir "*) ;; *) xrpath="$xrpath $dir" ;; esac continue ;; -static | -static-libtool-libs) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects # would be equivalent was wrong. It would break on at least # Digital Unix and AIX. continue ;; -thread-safe) thread_safe=yes continue ;; -version-info) prev=vinfo continue ;; -version-number) prev=vinfo vinfo_number=yes continue ;; -Wc,*) args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" case $flag in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") flag="\"$flag\"" ;; esac arg="$arg $wl$flag" compiler_flags="$compiler_flags $flag" done IFS="$save_ifs" arg=`$echo "X$arg" | $Xsed -e "s/^ //"` ;; -Wl,*) args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" case $flag in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") flag="\"$flag\"" ;; esac arg="$arg $wl$flag" compiler_flags="$compiler_flags $wl$flag" linker_flags="$linker_flags $flag" done IFS="$save_ifs" arg=`$echo "X$arg" | $Xsed -e "s/^ //"` ;; -Xcompiler) prev=xcompiler continue ;; -Xlinker) prev=xlinker continue ;; -XCClinker) prev=xcclinker continue ;; # Some other compiler flag. -* | +*) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac ;; *.$objext) # A standard object. objs="$objs $arg" ;; *.lo) # A libtool-controlled object. # Check to see that this really is a libtool object. if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then pic_object= non_pic_object= # Read the .lo file # If there is no directory component, then add one. case $arg in */* | *\\*) . $arg ;; *) . ./$arg ;; esac if test -z "$pic_object" || \ test -z "$non_pic_object" || test "$pic_object" = none && \ test "$non_pic_object" = none; then $echo "$modename: cannot find name of object for \`$arg'" 1>&2 exit $EXIT_FAILURE fi # Extract subdirectory from the argument. xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$arg"; then xdir= else xdir="$xdir/" fi if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then dlfiles="$dlfiles $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. dlprefiles="$dlprefiles $pic_object" prev= fi # A PIC object. libobjs="$libobjs $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object non_pic_objects="$non_pic_objects $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" non_pic_objects="$non_pic_objects $non_pic_object" fi else # Only an error if not doing a dry-run. if test -z "$run"; then $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 exit $EXIT_FAILURE else # Dry-run case. # Extract subdirectory from the argument. xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$arg"; then xdir= else xdir="$xdir/" fi pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` libobjs="$libobjs $pic_object" non_pic_objects="$non_pic_objects $non_pic_object" fi fi ;; *.$libext) # An archive. deplibs="$deplibs $arg" old_deplibs="$old_deplibs $arg" continue ;; *.la) # A libtool-controlled library. if test "$prev" = dlfiles; then # This library was specified with -dlopen. dlfiles="$dlfiles $arg" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. dlprefiles="$dlprefiles $arg" prev= else deplibs="$deplibs $arg" fi continue ;; # Some other compiler argument. *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" fi done # argument parsing loop if test -n "$prev"; then $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" fi oldlibs= # calculate the name of the file, without its directory outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` libobjs_save="$libobjs" if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` if test "X$output_objdir" = "X$output"; then output_objdir="$objdir" else output_objdir="$output_objdir/$objdir" fi # Create the object directory. if test ! -d "$output_objdir"; then $show "$mkdir $output_objdir" $run $mkdir $output_objdir exit_status=$? if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then exit $exit_status fi fi # Determine the type of output case $output in "") $echo "$modename: you must specify an output file" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; *.la) linkmode=lib ;; *) linkmode=prog ;; # Anything else should be a program. esac case $host in *cygwin* | *mingw* | *pw32*) # don't eliminate duplications in $postdeps and $predeps duplicate_compiler_generated_deps=yes ;; *) duplicate_compiler_generated_deps=$duplicate_deps ;; esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do if test "X$duplicate_deps" = "Xyes" ; then case "$libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi libs="$libs $deplib" done if test "$linkmode" = lib; then libs="$predeps $libs $compiler_lib_search_path $postdeps" # Compute libraries that are listed more than once in $predeps # $postdeps and mark them as special (i.e., whose duplicates are # not to be eliminated). pre_post_deps= if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; esac pre_post_deps="$pre_post_deps $pre_post_dep" done fi pre_post_deps= fi deplibs= newdependency_libs= newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries case $linkmode in lib) passes="conv link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 exit $EXIT_FAILURE ;; esac done ;; prog) compile_deplibs= finalize_deplibs= alldeplibs=no newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" ;; *) passes="conv" ;; esac for pass in $passes; do if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan"; then libs="$deplibs" deplibs= fi if test "$linkmode" = prog; then case $pass in dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; link) libs="$deplibs %DEPLIBS%" test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ;; esac fi if test "$pass" = dlopen; then # Collect dlpreopened libraries save_deplibs="$deplibs" deplibs= fi for deplib in $libs; do lib= found=no case $deplib in -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else compiler_flags="$compiler_flags $deplib" fi continue ;; -l*) if test "$linkmode" != lib && test "$linkmode" != prog; then $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 continue fi name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` if test "$linkmode" = lib; then searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" else searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" fi for searchdir in $searchdirs; do for search_ext in .la $std_shrext .so .a; do # Search the libtool library lib="$searchdir/lib${name}${search_ext}" if test -f "$lib"; then if test "$search_ext" = ".la"; then found=yes else found=no fi break 2 fi done done if test "$found" != yes; then # deplib doesn't seem to be a libtool library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue else # deplib is a libtool library # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, # We need to do some special things here, and not later. if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $deplib "*) if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then library_names= old_library= case $lib in */* | *\\*) . $lib ;; *) . ./$lib ;; esac for l in $old_library $library_names; do ll="$l" done if test "X$ll" = "X$old_library" ; then # only static version available found=no ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` test "X$ladir" = "X$lib" && ladir="." lib=$ladir/$old_library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue fi fi ;; *) ;; esac fi fi ;; # -l -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` ;; prog) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi if test "$pass" = scan; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` ;; *) $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 ;; esac # linkmode continue ;; # -L -R*) if test "$pass" = link; then dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; *) xrpath="$xrpath $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; *.la) lib="$deplib" ;; *.$libext) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi case $linkmode in lib) valid_a_lib=no case $deplibs_check_method in match_pattern*) set dummy $deplibs_check_method match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` if eval $echo \"$deplib\" 2>/dev/null \ | $SED 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then valid_a_lib=yes fi ;; pass_all) valid_a_lib=yes ;; esac if test "$valid_a_lib" != yes; then $echo $echo "*** Warning: Trying to link with static lib archive $deplib." $echo "*** I have the capability to make that library automatically link in when" $echo "*** you link to this library. But I can only do this if you have a" $echo "*** shared version of the library, which you do not appear to have" $echo "*** because the file extensions .$libext of this argument makes me believe" $echo "*** that it is just a static archive that I should not used here." else $echo $echo "*** Warning: Linking the shared library $output against the" $echo "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" fi continue ;; prog) if test "$pass" != link; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi continue ;; esac # linkmode ;; # *.$libext *.lo | *.$objext) if test "$pass" = conv; then deplibs="$deplib $deplibs" elif test "$linkmode" = prog; then if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. newdlprefiles="$newdlprefiles $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else newdlfiles="$newdlfiles $deplib" fi fi continue ;; %DEPLIBS%) alldeplibs=yes continue ;; esac # case $deplib if test "$found" = yes || test -f "$lib"; then : else $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2 exit $EXIT_FAILURE fi # Check to see that this really is a libtool archive. if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE fi ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` test "X$ladir" = "X$lib" && ladir="." dlname= dlopen= dlpreopen= libdir= library_names= old_library= # If the library was installed with an old release of libtool, # it will not redefine variables installed, or shouldnotlink installed=yes shouldnotlink=no avoidtemprpath= # Read the .la file case $lib in */* | *\\*) . $lib ;; *) . ./$lib ;; esac if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" != prog && test "$linkmode" != lib; }; then test -n "$dlopen" && dlfiles="$dlfiles $dlopen" test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" fi if test "$pass" = conv; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 exit $EXIT_FAILURE fi # It is a libtool convenience library, so add in its objects. convenience="$convenience $ladir/$objdir/$old_library" old_convenience="$old_convenience $ladir/$objdir/$old_library" tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" if test "X$duplicate_deps" = "Xyes" ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi tmp_libs="$tmp_libs $deplib" done elif test "$linkmode" != prog && test "$linkmode" != lib; then $echo "$modename: \`$lib' is not a convenience library" 1>&2 exit $EXIT_FAILURE fi continue fi # $pass = conv # Get the name of the library we link against. linklib= for l in $old_library $library_names; do linklib="$l" done if test -z "$linklib"; then $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 exit $EXIT_FAILURE fi # This library was specified with -dlopen. if test "$pass" = dlopen; then if test -z "$libdir"; then $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 exit $EXIT_FAILURE fi if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. dlprefiles="$dlprefiles $lib $dependency_libs" else newdlfiles="$newdlfiles $lib" fi continue fi # $pass = dlopen # We need an absolute path. case $ladir in [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 abs_ladir="$ladir" fi ;; esac laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` # Find the relevant object directory and library name. if test "X$installed" = Xyes; then if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then $echo "$modename: warning: library \`$lib' was moved." 1>&2 dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else dir="$libdir" absdir="$libdir" fi test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then dir="$ladir" absdir="$abs_ladir" # Remove this search path later notinst_path="$notinst_path $abs_ladir" else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later notinst_path="$notinst_path $abs_ladir" fi fi # $installed = yes name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` # This library was specified with -dlpreopen. if test "$pass" = dlpreopen; then if test -z "$libdir"; then $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 exit $EXIT_FAILURE fi # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then newdlprefiles="$newdlprefiles $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then newdlprefiles="$newdlprefiles $dir/$dlname" else newdlprefiles="$newdlprefiles $dir/$linklib" fi fi # $pass = dlpreopen if test -z "$libdir"; then # Link the convenience library if test "$linkmode" = lib; then deplibs="$dir/$old_library $deplibs" elif test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else deplibs="$lib $deplibs" # used for prog,scan pass fi continue fi if test "$linkmode" = prog && test "$pass" != link; then newlib_search_path="$newlib_search_path $ladir" deplibs="$lib $deplibs" linkalldeplibs=no if test "$link_all_deplibs" != no || test -z "$library_names" || test "$build_libtool_libs" = no; then linkalldeplibs=yes fi tmp_libs= for deplib in $dependency_libs; do case $deplib in -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test esac # Need to link against all dependency_libs? if test "$linkalldeplibs" = yes; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi if test "X$duplicate_deps" = "Xyes" ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi tmp_libs="$tmp_libs $deplib" done # for deplib continue fi # $linkmode = prog... if test "$linkmode,$pass" = "prog,link"; then if test -n "$library_names" && { { test "$prefer_static_libs" = no || test "$prefer_static_libs,$installed" = "built,yes"; } || test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then # Make sure the rpath contains only unique directories. case "$temp_rpath " in *" $dir "*) ;; *" $absdir "*) ;; *) temp_rpath="$temp_rpath $absdir" ;; esac fi # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) compile_rpath="$compile_rpath $absdir" esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac fi # $linkmode,$pass = prog,link... if test "$alldeplibs" = yes && { test "$deplibs_check_method" = pass_all || { test "$build_libtool_libs" = yes && test -n "$library_names"; }; }; then # We only need to search for static libraries continue fi fi link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs if test "$use_static_libs" = built && test "$installed" = yes ; then use_static_libs=no fi if test -n "$library_names" && { test "$use_static_libs" = no || test -z "$old_library"; }; then if test "$installed" = no; then notinst_deplibs="$notinst_deplibs $lib" need_relink=yes fi # This is a shared library # Warn about portability, can't link against -module's on # some systems (darwin) if test "$shouldnotlink" = yes && test "$pass" = link ; then $echo if test "$linkmode" = prog; then $echo "*** Warning: Linking the executable $output against the loadable module" else $echo "*** Warning: Linking the shared library $output against the loadable module" fi $echo "*** $linklib is not portable!" fi if test "$linkmode" = lib && test "$hardcode_into_libs" = yes; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) compile_rpath="$compile_rpath $absdir" esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names realname="$2" shift; shift libname=`eval \\$echo \"$libname_spec\"` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname="$dlname" elif test -n "$soname_spec"; then # bleh windows case $host in *cygwin* | mingw*) major=`expr $current - $age` versuffix="-$major" ;; esac eval soname=\"$soname_spec\" else soname="$realname" fi # Make a new name for the extract_expsyms_cmds to use soroot="$soname" soname=`$echo $soroot | ${SED} -e 's/^.*\///'` newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else $show "extracting exported symbol list from \`$soname'" save_ifs="$IFS"; IFS='~' cmds=$extract_expsyms_cmds for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else $show "generating import library for \`$soname'" save_ifs="$IFS"; IFS='~' cmds=$old_archive_from_expsyms_cmds for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" fi # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" if test "$linkmode" = prog || test "$mode" != relink; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) if test "$hardcode_direct" = no; then add="$dir/$linklib" case $host in *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; *-*-sysv4*uw2*) add_dir="-L$dir" ;; *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ *-*-unixware7*) add_dir="-L$dir" ;; *-*-darwin* ) # if the lib is a module then we can not link against # it, someone is ignoring the new warnings I added if /usr/bin/file -L $add 2> /dev/null | $EGREP ": [^:]* bundle" >/dev/null ; then $echo "** Warning, lib $linklib is a module, not a shared library" if test -z "$old_library" ; then $echo $echo "** And there doesn't seem to be a static archive available" $echo "** The link will probably fail, sorry" else add="$dir/$old_library" fi fi esac elif test "$hardcode_minus_L" = no; then case $host in *-*-sunos*) add_shlibpath="$dir" ;; esac add_dir="-L$dir" add="-l$name" elif test "$hardcode_shlibpath_var" = no; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; relink) if test "$hardcode_direct" = yes; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$dir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; *) lib_linked=no ;; esac if test "$lib_linked" != yes; then $echo "$modename: configuration error: unsupported hardcode properties" exit $EXIT_FAILURE fi if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; esac fi if test "$linkmode" = prog; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" if test "$hardcode_direct" != yes && \ test "$hardcode_minus_L" != yes && \ test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac fi fi fi if test "$linkmode" = prog || test "$mode" = relink; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. if test "$hardcode_direct" = yes; then add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$libdir" add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac add="-l$name" elif test "$hardcode_automatic" = yes; then if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then add="$inst_prefix_dir$libdir/$linklib" else add="$libdir/$linklib" fi else # We cannot seem to hardcode it, guess we'll fake it. add_dir="-L$libdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" fi if test "$linkmode" = prog; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" fi fi elif test "$linkmode" = prog; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. if test "$hardcode_direct" != unsupported; then test -n "$old_library" && linklib="$old_library" compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi elif test "$build_libtool_libs" = yes; then # Not a shared library if test "$deplibs_check_method" != pass_all; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. $echo $echo "*** Warning: This system can not link to static lib archive $lib." $echo "*** I have the capability to make that library automatically link in when" $echo "*** you link to this library. But I can only do this if you have a" $echo "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then $echo "*** But as you try to build a module library, libtool will still create " $echo "*** a static module, that should work as long as the dlopening application" $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then $echo $echo "*** However, this would only work if libtool was able to extract symbol" $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" $echo "*** not find such a program. So, this module is probably useless." $echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi else deplibs="$dir/$old_library $deplibs" link_static=yes fi fi # link shared/static library? if test "$linkmode" = lib; then if test -n "$dependency_libs" && { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || test "$link_static" = yes; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do case $libdir in -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` case " $xrpath " in *" $temp_xrpath "*) ;; *) xrpath="$xrpath $temp_xrpath";; esac;; *) temp_deplibs="$temp_deplibs $libdir";; esac done dependency_libs="$temp_deplibs" fi newlib_search_path="$newlib_search_path $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" if test "X$duplicate_deps" = "Xyes" ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi tmp_libs="$tmp_libs $deplib" done if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do case $deplib in -L*) path="$deplib" ;; *.la) dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$deplib" && dir="." # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 absdir="$dir" fi ;; esac if grep "^installed=no" $deplib > /dev/null; then path="$absdir/$objdir" else eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE fi if test "$absdir" != "$libdir"; then $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 fi path="$absdir" fi depdepl= case $host in *-*-darwin*) # we do not want to link against static libs, # but need to link against shared eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` eval deplibdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -n "$deplibrary_names" ; then for tmp in $deplibrary_names ; do depdepl=$tmp done if test -f "$deplibdir/$depdepl" ; then depdepl="$deplibdir/$depdepl" elif test -f "$path/$depdepl" ; then depdepl="$path/$depdepl" else # Can't find it, oh well... depdepl= fi # do not add paths which are already there case " $newlib_search_path " in *" $path "*) ;; *) newlib_search_path="$newlib_search_path $path";; esac fi path="" ;; *) path="-L$path" ;; esac ;; -l*) case $host in *-*-darwin*) # Again, we only want to link against shared libraries eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` for tmp in $newlib_search_path ; do if test -f "$tmp/lib$tmp_libs.dylib" ; then eval depdepl="$tmp/lib$tmp_libs.dylib" break fi done path="" ;; *) continue ;; esac ;; *) continue ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$path $deplibs" ;; esac case " $deplibs " in *" $depdepl "*) ;; *) deplibs="$depdepl $deplibs" ;; esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs dependency_libs="$newdependency_libs" if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi if test "$pass" != dlopen; then if test "$pass" != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; *) lib_search_path="$lib_search_path $dir" ;; esac done newlib_search_path= fi if test "$linkmode,$pass" != "prog,link"; then vars="deplibs" else vars="compile_deplibs finalize_deplibs" fi for var in $vars dependency_libs; do # Add libraries to $var in reverse order eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do # FIXME: Pedantically, this is the right thing to do, so # that some nasty dependency loop isn't accidentally # broken: #new_libs="$deplib $new_libs" # Pragmatically, this seems to cause very few problems in # practice: case $deplib in -L*) new_libs="$deplib $new_libs" ;; -R*) ;; *) # And here is the reason: when a library appears more # than once as an explicit dependence of a library, or # is implicitly linked in more than once by the # compiler, it is considered special, and multiple # occurrences thereof are not removed. Compare this # with having the same library being listed as a # dependency of multiple other libraries: in this case, # we know (pedantically, we assume) the library does not # need to be listed more than once, so we keep only the # last copy. This is not always right, but it is rare # enough that we require users that really mean to play # such unportable linking tricks to link the library # using -Wl,-lname, so that libtool does not consider it # for duplicate removal. case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$deplib $new_libs" ;; esac ;; esac ;; esac done tmp_libs= for deplib in $new_libs; do case $deplib in -L*) case " $tmp_libs " in *" $deplib "*) ;; *) tmp_libs="$tmp_libs $deplib" ;; esac ;; *) tmp_libs="$tmp_libs $deplib" ;; esac done eval $var=\"$tmp_libs\" done # for var fi # Last step: remove runtime libs from dependency_libs # (they stay in deplibs) tmp_libs= for i in $dependency_libs ; do case " $predeps $postdeps $compiler_lib_search_path " in *" $i "*) i="" ;; esac if test -n "$i" ; then tmp_libs="$tmp_libs $i" fi done dependency_libs=$tmp_libs done # for pass if test "$linkmode" = prog; then dlfiles="$newdlfiles" dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) case " $deplibs" in *\ -l* | *\ -L*) $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 ;; esac if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 fi if test -n "$rpath"; then $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 fi if test -n "$xrpath"; then $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 fi if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 fi if test -n "$export_symbols" || test -n "$export_symbols_regex"; then $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 fi # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" objs="$objs$old_deplibs" ;; lib) # Make sure we only generate libraries of the form `libNAME.la'. case $outputname in lib*) name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) if test "$module" = no; then $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` fi ;; esac if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 exit $EXIT_FAILURE else $echo $echo "*** Warning: Linking the shared library $output against the non-libtool" $echo "*** objects $objs is not portable!" libobjs="$libobjs $objs" fi fi if test "$dlself" != no; then $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 fi set dummy $rpath if test "$#" -gt 2; then $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 fi install_libdir="$2" oldlibs= if test -z "$rpath"; then if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. # Some compilers have problems with a `.al' extension so # convenience libraries should have the same extension an # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 fi else # Parse the version information argument. save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 IFS="$save_ifs" if test -n "$8"; then $echo "$modename: too many parameters to \`-version-info'" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts # to make the code below a bit more comprehensible case $vinfo_number in yes) number_major="$2" number_minor="$3" number_revision="$4" # # There are really only two kinds -- those that # use the current revision as the major version # and those that subtract age and use age as # a minor version. But, then there is irix # which has an extra 1 added just for fun # case $version_type in darwin|linux|osf|windows|none) current=`expr $number_major + $number_minor` age="$number_minor" revision="$number_revision" ;; freebsd-aout|freebsd-elf|sunos) current="$number_major" revision="$number_minor" age="0" ;; irix|nonstopux) current=`expr $number_major + $number_minor` age="$number_minor" revision="$number_minor" lt_irix_increment=no ;; *) $echo "$modename: unknown library version type \`$version_type'" 1>&2 $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 exit $EXIT_FAILURE ;; esac ;; no) current="$2" revision="$3" age="$4" ;; esac # Check that each of the things are valid numbers. case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit $EXIT_FAILURE ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit $EXIT_FAILURE ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit $EXIT_FAILURE ;; esac if test "$age" -gt "$current"; then $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit $EXIT_FAILURE fi # Calculate the version variables. major= versuffix= verstring= case $version_type in none) ;; darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header major=.`expr $current - $age` versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... minor_current=`expr $current + 1` xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; freebsd-aout) major=".$current" versuffix=".$current.$revision"; ;; freebsd-elf) major=".$current" versuffix=".$current"; ;; irix | nonstopux) if test "X$lt_irix_increment" = "Xno"; then major=`expr $current - $age` else major=`expr $current - $age + 1` fi case $version_type in nonstopux) verstring_prefix=nonstopux ;; *) verstring_prefix=sgi ;; esac verstring="$verstring_prefix$major.$revision" # Add in all the interfaces that we are compatible with. loop=$revision while test "$loop" -ne 0; do iface=`expr $revision - $loop` loop=`expr $loop - 1` verstring="$verstring_prefix$major.$iface:$verstring" done # Before this point, $major must not contain `.'. major=.$major versuffix="$major.$revision" ;; linux) major=.`expr $current - $age` versuffix="$major.$age.$revision" ;; osf) major=.`expr $current - $age` versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" # Add in all the interfaces that we are compatible with. loop=$age while test "$loop" -ne 0; do iface=`expr $current - $loop` loop=`expr $loop - 1` verstring="$verstring:${iface}.0" done # Make executables depend on our current version. verstring="$verstring:${current}.0" ;; sunos) major=".$current" versuffix=".$current.$revision" ;; windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 filesystems. major=`expr $current - $age` versuffix="-$major" ;; *) $echo "$modename: unknown library version type \`$version_type'" 1>&2 $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 exit $EXIT_FAILURE ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely verstring= ;; *) verstring="0.0" ;; esac if test "$need_version" = no; then versuffix= else versuffix=".0.0" fi fi # Remove version info from name if versioning should be avoided if test "$avoid_version" = yes && test "$need_version" = no; then major= versuffix= verstring="" fi # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 build_libtool_libs=no build_old_libs=yes fi else # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi fi if test "$mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= tempremovelist=`$echo "$output_objdir/*"` for p in $tempremovelist; do case $p in *.$objext) ;; $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) if test "X$precious_files_regex" != "X"; then if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 then continue fi fi removelist="$removelist $p" ;; *) ;; esac done if test -n "$removelist"; then $show "${rm}r $removelist" $run ${rm}r $removelist fi fi # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then oldlibs="$oldlibs $output_objdir/$libname.$libext" # Transform .lo files to .o files. oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` fi # Eliminate all temporary directories. #for path in $notinst_path; do # lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` # deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` # dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do temp_xrpath="$temp_xrpath -R$libdir" case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; esac done if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened old_dlfiles="$dlfiles" dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; *) dlfiles="$dlfiles $lib" ;; esac done # Make sure dlprefiles contains only unique files old_dlprefiles="$dlprefiles" dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; *) dlprefiles="$dlprefiles $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework deplibs="$deplibs -framework System" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work ;; *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then deplibs="$deplibs -lc" fi ;; esac fi # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname release_save=$release versuffix_save=$versuffix major_save=$major # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? release="" versuffix="" major="" newdeplibs= droppeddeps=no case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just # implementing what was already the behavior. newdeplibs=$deplibs ;; test_compile) # This code stresses the "libraries are programs" paradigm to its # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. $rm conftest.c cat > conftest.c </dev/null` for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null \ | grep " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ | ${SED} 10q \ | $EGREP "$file_magic_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes $echo $echo "*** Warning: linker path does not have real file for library $a_deplib." $echo "*** I have the capability to make that library automatically link in when" $echo "*** you link to this library. But I can only do this if you have a" $echo "*** shared version of the library, which you do not appear to have" $echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $echo "*** with $libname but no candidates were found. (...for file magic test)" else $echo "*** with $libname and none of the candidates passed a file format test" $echo "*** using a file magic. Last file checked: $potlib" fi fi else # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" fi done # Gone through all deplibs. ;; match_pattern*) set dummy $deplibs_check_method match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` for a_deplib in $deplibs; do name=`expr $a_deplib : '-l\(.*\)'` # If $name is empty we are operating on a -L argument. if test -n "$name" && test "$name" != "0"; then if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) newdeplibs="$newdeplibs $a_deplib" a_deplib="" ;; esac fi if test -n "$a_deplib" ; then libname=`eval \\$echo \"$libname_spec\"` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test if eval $echo \"$potent_lib\" 2>/dev/null \ | ${SED} 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes $echo $echo "*** Warning: linker path does not have real file for library $a_deplib." $echo "*** I have the capability to make that library automatically link in when" $echo "*** you link to this library. But I can only do this if you have a" $echo "*** shared version of the library, which you do not appear to have" $echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $echo "*** with $libname but no candidates were found. (...for regex pattern test)" else $echo "*** with $libname and none of the candidates passed a file format test" $echo "*** using a regex pattern. Last file checked: $potlib" fi fi else # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" fi done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ -e 's/ -[LR][^ ]*//g'` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` done fi if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ | grep . >/dev/null; then $echo if test "X$deplibs_check_method" = "Xnone"; then $echo "*** Warning: inter-library dependencies are not supported in this platform." else $echo "*** Warning: inter-library dependencies are not known to be supported." fi $echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes fi ;; esac versuffix=$versuffix_save major=$major_save release=$release_save libname=$libname_save name=$name_save case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then $echo $echo "*** Warning: libtool could not satisfy all declared inter-library" $echo "*** dependencies of module $libname. Therefore, libtool will create" $echo "*** a static module, that should work as long as the dlopening" $echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then $echo $echo "*** However, this would only work if libtool was able to extract symbol" $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" $echo "*** not find such a program. So, this module is probably useless." $echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi else $echo "*** The inter-library dependencies that have been dropped here will be" $echo "*** automatically added whenever a program is linked with this library" $echo "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then $echo $echo "*** Since this library must not contain undefined symbols," $echo "*** because either the platform does not support them or" $echo "*** it was explicitly requested with -no-undefined," $echo "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi fi fi # Done checking deplibs! deplibs=$newdeplibs fi # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $deplibs " in *" -L$path/$objdir "*) new_libs="$new_libs -L$path/$objdir" ;; esac ;; esac done for deplib in $deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$new_libs $deplib" ;; esac ;; *) new_libs="$new_libs $deplib" ;; esac done deplibs="$new_libs" # All the library-specific variables (install_libdir is set above). library_names= old_library= dlname= # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then if test "$hardcode_into_libs" = yes; then # Hardcode the library paths hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" test "$mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" dep_rpath="$dep_rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) perm_rpath="$perm_rpath $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" if test -n "$hardcode_libdir_flag_spec_ld"; then case $archive_cmds in *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;; *) eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;; esac else eval dep_rpath=\"$hardcode_libdir_flag_spec\" fi fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do rpath="$rpath$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi shlibpath="$finalize_shlibpath" test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi # Get the real and link names of the library. eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names realname="$2" shift; shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else soname="$realname" fi if test -z "$dlname"; then dlname=$soname fi lib="$output_objdir/$realname" linknames= for link do linknames="$linknames $link" done # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` # Prepare the list of exported symbols if test -z "$export_symbols"; then if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then $show "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $run $rm $export_symbols cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" if len=`expr "X$cmd" : ".*"` && test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then $show "$cmd" $run eval "$cmd" || exit $? skipped_export=false else # The command line is too long to execute in one step. $show "using reloadable object file for export list..." skipped_export=: # Break out early, otherwise skipped_export may be # set to false by a later but shorter cmd. break fi done IFS="$save_ifs" if test -n "$export_symbols_regex"; then $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' $show "$mv \"${export_symbols}T\" \"$export_symbols\"" $run eval '$mv "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' fi tmp_deplibs= for test_deplib in $deplibs; do case " $convenience " in *" $test_deplib "*) ;; *) tmp_deplibs="$tmp_deplibs $test_deplib" ;; esac done deplibs="$tmp_deplibs" if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" else gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_extract_archives $gentop $convenience libobjs="$libobjs $func_extract_archives_result" fi fi if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" linker_flags="$linker_flags $flag" fi # Make a backup of the uninstalled library when relinking if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? fi # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then eval test_cmds=\"$module_expsym_cmds\" cmds=$module_expsym_cmds else eval test_cmds=\"$module_cmds\" cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then eval test_cmds=\"$archive_expsym_cmds\" cmds=$archive_expsym_cmds else eval test_cmds=\"$archive_cmds\" cmds=$archive_cmds fi fi if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*" 2>/dev/null` && test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else # The command line is too long to link in one step, link piecewise. $echo "creating reloadable object files..." # Save the value of $output and $libobjs because we want to # use them later. If we have whole_archive_flag_spec, we # want to use save_libobjs as it was before # whole_archive_flag_spec was expanded, because we can't # assume the linker understands whole_archive_flag_spec. # This may have to be revisited, in case too many # convenience libraries get linked in and end up exceeding # the spec. if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then save_libobjs=$libobjs fi save_output=$output output_la=`$echo "X$output" | $Xsed -e "$basename"` # Clear the reloadable object creation command queue and # initialize k to one. test_cmds= concat_cmds= objlist= delfiles= last_robj= k=1 output=$output_objdir/$output_la-${k}.$objext # Loop over the list of objects to be linked. for obj in $save_libobjs do eval test_cmds=\"$reload_cmds $objlist $last_robj\" if test "X$objlist" = X || { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && test "$len" -le "$max_cmd_len"; }; then objlist="$objlist $obj" else # The command $test_cmds is almost too long, add a # command to the queue. if test "$k" -eq 1 ; then # The first file doesn't have a previous command to add. eval concat_cmds=\"$reload_cmds $objlist $last_robj\" else # All subsequent reloadable object files will link in # the last one created. eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" fi last_robj=$output_objdir/$output_la-${k}.$objext k=`expr $k + 1` output=$output_objdir/$output_la-${k}.$objext objlist=$obj len=1 fi done # Handle the remaining objects by creating one last # reloadable object file. All subsequent reloadable object # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" if ${skipped_export-false}; then $show "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $run $rm $export_symbols libobjs=$output # Append the command to create the export file. eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" fi # Set up a command to remove the reloadable object files # after they are used. i=0 while test "$i" -lt "$k" do i=`expr $i + 1` delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" done $echo "creating a temporary reloadable object file: $output" # Loop through the commands generated above and execute them. save_ifs="$IFS"; IFS='~' for cmd in $concat_cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" libobjs=$output # Restore the value of output. output=$save_output if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" fi # Expand the library linking commands again to reset the # value of $libobjs for piecewise linking. # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then cmds=$module_expsym_cmds else cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then cmds=$archive_expsym_cmds else cmds=$archive_cmds fi fi # Append the command to remove the reloadable object files # to the just-reset $cmds. eval cmds=\"\$cmds~\$rm $delfiles\" fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' fi exit $lt_exit } done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? if test -n "$convenience"; then if test -z "$whole_archive_flag_spec"; then $show "${rm}r $gentop" $run ${rm}r "$gentop" fi fi exit $EXIT_SUCCESS fi # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? fi done # If -module or -export-dynamic was specified, set the dlname. if test "$module" = yes || test "$export_dynamic" = yes; then # On all known operating systems, these are identical. dlname="$soname" fi fi ;; obj) case " $deplibs" in *\ -l* | *\ -L*) $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 ;; esac if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 fi if test -n "$rpath"; then $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 fi if test -n "$xrpath"; then $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 fi if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 fi case $output in *.lo) if test -n "$objs$old_deplibs"; then $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 exit $EXIT_FAILURE fi libobj="$output" obj=`$echo "X$output" | $Xsed -e "$lo2o"` ;; *) libobj= obj="$output" ;; esac # Delete the old objects. $run $rm $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create # different ones for PIC/non-PIC, this we'll have to duplicate # the extraction. reload_conv_objs= gentop= # reload_cmds runs $LD directly, so let us get rid of # -Wl from whole_archive_flag_spec and hope we can get by with # turning comma into space.. wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` else gentop="$output_objdir/${obj}x" generated="$generated $gentop" func_extract_archives $gentop $convenience reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi # Create the old-style object. reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" cmds=$reload_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then $show "${rm}r $gentop" $run ${rm}r $gentop fi exit $EXIT_SUCCESS fi if test "$build_libtool_libs" != yes; then if test -n "$gentop"; then $show "${rm}r $gentop" $run ${rm}r $gentop fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. # $show "echo timestamp > $libobj" # $run eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS fi if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" cmds=$reload_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" fi if test -n "$gentop"; then $show "${rm}r $gentop" $run ${rm}r $gentop fi exit $EXIT_SUCCESS ;; prog) case $host in *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; esac if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 fi if test "$preload" = yes; then if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && test "$dlopen_self_static" = unknown; then $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." fi fi case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` ;; esac case $host in *darwin*) # Don't allow lazy linking, it breaks C++ global constructors if test "$tagname" = CXX ; then compile_command="$compile_command ${wl}-bind_at_load" finalize_command="$finalize_command ${wl}-bind_at_load" fi ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $compile_deplibs " in *" -L$path/$objdir "*) new_libs="$new_libs -L$path/$objdir" ;; esac ;; esac done for deplib in $compile_deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$new_libs $deplib" ;; esac ;; *) new_libs="$new_libs $deplib" ;; esac done compile_deplibs="$new_libs" compile_command="$compile_command $compile_deplibs" finalize_command="$finalize_command $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; esac done fi # Now hardcode the library paths rpath= hardcode_libdirs= for libdir in $compile_rpath $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) perm_rpath="$perm_rpath $libdir" ;; esac fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; *) dllsearchpath="$dllsearchpath:$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; *) dllsearchpath="$dllsearchpath:$testbindir";; esac ;; esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi compile_rpath="$rpath" rpath= hardcode_libdirs= for libdir in $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi finalize_rpath="$rpath" if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` fi dlsyms= if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then if test -n "$NM" && test -n "$global_symbol_pipe"; then dlsyms="${outputname}S.c" else $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 fi fi if test -n "$dlsyms"; then case $dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. nlist="$output_objdir/${outputname}.nm" $show "$rm $nlist ${nlist}S ${nlist}T" $run $rm "$nlist" "${nlist}S" "${nlist}T" # Parse the name list into a source file. $show "creating $output_objdir/$dlsyms" test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ /* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ /* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ #ifdef __cplusplus extern \"C\" { #endif /* Prevent the only kind of declaration conflicts we can make. */ #define lt_preloaded_symbols some_other_symbol /* External symbol declarations for the compiler. */\ " if test "$dlself" = yes; then $show "generating symbol list for \`$output'" test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` for arg in $progfiles; do $show "extracting global C symbols from \`$arg'" $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi if test -n "$export_symbols_regex"; then $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi # Prepare the list of exported symbols if test -z "$export_symbols"; then export_symbols="$output_objdir/$outputname.exp" $run $rm $export_symbols $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in *cygwin* | *mingw* ) $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ;; esac else $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' $run eval 'mv "$nlist"T "$nlist"' case $host in *cygwin* | *mingw* ) $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; esac fi fi for arg in $dlprefiles; do $show "extracting global C symbols from \`$arg'" name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` $run eval '$echo ": $name " >> "$nlist"' $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" done if test -z "$run"; then # Make sure we have at least an empty file. test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $mv "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. if grep -v "^: " < "$nlist" | if sort -k 3 /dev/null 2>&1; then sort -k 3 else sort +2 fi | uniq > "$nlist"S; then : else grep -v "^: " < "$nlist" > "$nlist"S fi if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' else $echo '/* NONE */' >> "$output_objdir/$dlsyms" fi $echo >> "$output_objdir/$dlsyms" "\ #undef lt_preloaded_symbols #if defined (__STDC__) && __STDC__ # define lt_ptr void * #else # define lt_ptr char * # define const #endif /* The mapping between symbol names and symbols. */ " case $host in *cygwin* | *mingw* ) $echo >> "$output_objdir/$dlsyms" "\ /* DATA imports from DLLs on WIN32 can't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs */ struct { " ;; * ) $echo >> "$output_objdir/$dlsyms" "\ const struct { " ;; esac $echo >> "$output_objdir/$dlsyms" "\ const char *name; lt_ptr address; } lt_preloaded_symbols[] = {\ " eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" $echo >> "$output_objdir/$dlsyms" "\ {0, (lt_ptr) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt_preloaded_symbols; } #endif #ifdef __cplusplus } #endif\ " fi pic_flag_for_symtable= case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) case "$compile_command " in *" -static "*) ;; *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; esac;; *-*-hpux*) case "$compile_command " in *" -static "*) ;; *) pic_flag_for_symtable=" $pic_flag";; esac esac # Now compile the dynamic symbol file. $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? # Clean up the generated files. $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" # Transform the symbol file into the correct name. case $host in *cygwin* | *mingw* ) if test -f "$output_objdir/${outputname}.def" ; then compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` else compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` fi ;; * ) compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` ;; esac ;; *) $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 exit $EXIT_FAILURE ;; esac else # We keep going just in case the user didn't refer to # lt_preloaded_symbols. The linker will fail if global_symbol_pipe # really was required. # Nullify the symbol file. compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` fi if test "$need_relink" = no || test "$build_libtool_libs" != yes; then # Replace the output file specification. compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. $show "$link_command" $run eval "$link_command" exit_status=$? # Delete the generated files. if test -n "$dlsyms"; then $show "$rm $output_objdir/${outputname}S.${objext}" $run $rm "$output_objdir/${outputname}S.${objext}" fi exit $exit_status fi if test -n "$shlibpath_var"; then # We should set the shlibpath_var rpath= for dir in $temp_rpath; do case $dir in [\\/]* | [A-Za-z]:[\\/]*) # Absolute path. rpath="$rpath$dir:" ;; *) # Relative path: add a thisdir entry. rpath="$rpath\$thisdir/$dir:" ;; esac done temp_rpath="$rpath" fi if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi if test -n "$finalize_shlibpath"; then finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" fi compile_var= finalize_var= if test -n "$runpath_var"; then if test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do rpath="$rpath$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi if test -n "$finalize_perm_rpath"; then # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do rpath="$rpath$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi fi if test "$no_install" = yes; then # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $run $rm $output # Link the executable and exit $show "$link_command" $run eval "$link_command" || exit $? exit $EXIT_SUCCESS fi if test "$hardcode_action" = relink; then # Fast installation is not supported link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 $echo "$modename: \`$output' will be relinked during installation" 1>&2 else if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP` else # fast_install is set to needless relink_command= fi else link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" fi fi # Replace the output file specification. link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname $show "$link_command" $run eval "$link_command" || exit $? # Now create the wrapper script. $show "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` relink_command="$var=\"$var_value\"; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` fi # Quote $echo for shipping. if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then case $progpath in [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; esac qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` else qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` fi # Only actually do things if our run command is non-null. if test -z "$run"; then # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; *) exeext= ;; esac case $host in *cygwin* | *mingw* ) output_name=`basename $output` output_path=`dirname $output` cwrappersource="$output_path/$objdir/lt-$output_name.c" cwrapper="$output_path/$output_name.exe" $rm $cwrappersource $cwrapper trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 cat > $cwrappersource <> $cwrappersource<<"EOF" #include #include #include #include #include #include #include #include #include #if defined(PATH_MAX) # define LT_PATHMAX PATH_MAX #elif defined(MAXPATHLEN) # define LT_PATHMAX MAXPATHLEN #else # define LT_PATHMAX 1024 #endif #ifndef DIR_SEPARATOR # define DIR_SEPARATOR '/' # define PATH_SEPARATOR ':' #endif #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ defined (__OS2__) # define HAVE_DOS_BASED_FILE_SYSTEM # ifndef DIR_SEPARATOR_2 # define DIR_SEPARATOR_2 '\\' # endif # ifndef PATH_SEPARATOR_2 # define PATH_SEPARATOR_2 ';' # endif #endif #ifndef DIR_SEPARATOR_2 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) #else /* DIR_SEPARATOR_2 */ # define IS_DIR_SEPARATOR(ch) \ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) #endif /* DIR_SEPARATOR_2 */ #ifndef PATH_SEPARATOR_2 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) #else /* PATH_SEPARATOR_2 */ # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) #endif /* PATH_SEPARATOR_2 */ #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) #define XFREE(stale) do { \ if (stale) { free ((void *) stale); stale = 0; } \ } while (0) /* -DDEBUG is fairly common in CFLAGS. */ #undef DEBUG #if defined DEBUGWRAPPER # define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) #else # define DEBUG(format, ...) #endif const char *program_name = NULL; void * xmalloc (size_t num); char * xstrdup (const char *string); const char * base_name (const char *name); char * find_executable(const char *wrapper); int check_executable(const char *path); char * strendzap(char *str, const char *pat); void lt_fatal (const char *message, ...); int main (int argc, char *argv[]) { char **newargz; int i; program_name = (char *) xstrdup (base_name (argv[0])); DEBUG("(main) argv[0] : %s\n",argv[0]); DEBUG("(main) program_name : %s\n",program_name); newargz = XMALLOC(char *, argc+2); EOF cat >> $cwrappersource <> $cwrappersource <<"EOF" newargz[1] = find_executable(argv[0]); if (newargz[1] == NULL) lt_fatal("Couldn't find %s", argv[0]); DEBUG("(main) found exe at : %s\n",newargz[1]); /* we know the script has the same name, without the .exe */ /* so make sure newargz[1] doesn't end in .exe */ strendzap(newargz[1],".exe"); for (i = 1; i < argc; i++) newargz[i+1] = xstrdup(argv[i]); newargz[argc+1] = NULL; for (i=0; i> $cwrappersource <> $cwrappersource <> $cwrappersource <<"EOF" return 127; } void * xmalloc (size_t num) { void * p = (void *) malloc (num); if (!p) lt_fatal ("Memory exhausted"); return p; } char * xstrdup (const char *string) { return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL ; } const char * base_name (const char *name) { const char *base; #if defined (HAVE_DOS_BASED_FILE_SYSTEM) /* Skip over the disk name in MSDOS pathnames. */ if (isalpha ((unsigned char)name[0]) && name[1] == ':') name += 2; #endif for (base = name; *name; name++) if (IS_DIR_SEPARATOR (*name)) base = name + 1; return base; } int check_executable(const char * path) { struct stat st; DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); if ((!path) || (!*path)) return 0; if ((stat (path, &st) >= 0) && ( /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ #if defined (S_IXOTH) ((st.st_mode & S_IXOTH) == S_IXOTH) || #endif #if defined (S_IXGRP) ((st.st_mode & S_IXGRP) == S_IXGRP) || #endif ((st.st_mode & S_IXUSR) == S_IXUSR)) ) return 1; else return 0; } /* Searches for the full path of the wrapper. Returns newly allocated full path name if found, NULL otherwise */ char * find_executable (const char* wrapper) { int has_slash = 0; const char* p; const char* p_next; /* static buffer for getcwd */ char tmp[LT_PATHMAX + 1]; int tmp_len; char* concat_name; DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); if ((wrapper == NULL) || (*wrapper == '\0')) return NULL; /* Absolute path? */ #if defined (HAVE_DOS_BASED_FILE_SYSTEM) if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') { concat_name = xstrdup (wrapper); if (check_executable(concat_name)) return concat_name; XFREE(concat_name); } else { #endif if (IS_DIR_SEPARATOR (wrapper[0])) { concat_name = xstrdup (wrapper); if (check_executable(concat_name)) return concat_name; XFREE(concat_name); } #if defined (HAVE_DOS_BASED_FILE_SYSTEM) } #endif for (p = wrapper; *p; p++) if (*p == '/') { has_slash = 1; break; } if (!has_slash) { /* no slashes; search PATH */ const char* path = getenv ("PATH"); if (path != NULL) { for (p = path; *p; p = p_next) { const char* q; size_t p_len; for (q = p; *q; q++) if (IS_PATH_SEPARATOR(*q)) break; p_len = q - p; p_next = (*q == '\0' ? q : q + 1); if (p_len == 0) { /* empty path: current directory */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal ("getcwd failed"); tmp_len = strlen(tmp); concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); } else { concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); memcpy (concat_name, p, p_len); concat_name[p_len] = '/'; strcpy (concat_name + p_len + 1, wrapper); } if (check_executable(concat_name)) return concat_name; XFREE(concat_name); } } /* not found in PATH; assume curdir */ } /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal ("getcwd failed"); tmp_len = strlen(tmp); concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); if (check_executable(concat_name)) return concat_name; XFREE(concat_name); return NULL; } char * strendzap(char *str, const char *pat) { size_t len, patlen; assert(str != NULL); assert(pat != NULL); len = strlen(str); patlen = strlen(pat); if (patlen <= len) { str += len - patlen; if (strcmp(str, pat) == 0) *str = '\0'; } return str; } static void lt_error_core (int exit_status, const char * mode, const char * message, va_list ap) { fprintf (stderr, "%s: %s: ", program_name, mode); vfprintf (stderr, message, ap); fprintf (stderr, ".\n"); if (exit_status >= 0) exit (exit_status); } void lt_fatal (const char *message, ...) { va_list ap; va_start (ap, message); lt_error_core (EXIT_FAILURE, "FATAL", message, ap); va_end (ap); } EOF # we should really use a build-platform specific compiler # here, but OTOH, the wrappers (shell script and this C one) # are only useful if you want to execute the "real" binary. # Since the "real" binary is built for $host, then this # wrapper might as well be built for $host, too. $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource ;; esac $rm $output trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 $echo > $output "\ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. # # This wrapper script should never be moved out of the build directory. # If it is, it will not operate correctly. # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='${SED} -e 1s/^X//' sed_quote_subst='$sed_quote_subst' # Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variable: notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$echo are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then echo=\"$qecho\" file=\"\$0\" # Make sure echo works. if test \"X\$1\" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then # Yippee, \$echo works! : else # Restart under the correct shell, and then maybe \$echo will work. exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} fi fi\ " $echo >> $output "\ # Find the directory that this script lives in. thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` done # Try to get the absolute directory name. absdir=\`cd \"\$thisdir\" && pwd\` test -n \"\$absdir\" && thisdir=\"\$absdir\" " if test "$fast_install" = yes; then $echo >> $output "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || \\ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" if test ! -d \"\$progdir\"; then $mkdir \"\$progdir\" else $rm \"\$progdir/\$file\" fi" $echo >> $output "\ # relink executable if necessary if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else $echo \"\$relink_command_output\" >&2 $rm \"\$progdir/\$file\" exit $EXIT_FAILURE fi fi $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || { $rm \"\$progdir/\$program\"; $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } $rm \"\$progdir/\$file\" fi" else $echo >> $output "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi $echo >> $output "\ if test -f \"\$progdir/\$program\"; then" # Export our shlibpath_var if we have one. if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $echo >> $output "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` export $shlibpath_var " fi # fixup the dll searchpath if we need to. if test -n "$dllsearchpath"; then $echo >> $output "\ # Add the dll search path components to the executable PATH PATH=$dllsearchpath:\$PATH " fi $echo >> $output "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. " case $host in # Backslashes separate directories on plain windows *-*-mingw | *-*-os2*) $echo >> $output "\ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} " ;; *) $echo >> $output "\ exec \"\$progdir/\$program\" \${1+\"\$@\"} " ;; esac $echo >> $output "\ \$echo \"\$0: cannot exec \$program \$*\" exit $EXIT_FAILURE fi else # The program doesn't exist. \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 \$echo \"This script is just a wrapper for \$program.\" 1>&2 $echo \"See the $PACKAGE documentation for more information.\" 1>&2 exit $EXIT_FAILURE fi fi\ " chmod +x $output fi exit $EXIT_SUCCESS ;; esac # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do if test "$build_libtool_libs" = convenience; then oldobjs="$libobjs_save" addlibs="$convenience" build_libtool_libs=no else if test "$build_libtool_libs" = module; then oldobjs="$libobjs_save" build_libtool_libs=no else oldobjs="$old_deplibs $non_pic_objects" fi addlibs="$old_convenience" fi if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_extract_archives $gentop $addlibs oldobjs="$oldobjs $func_extract_archives_result" fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then cmds=$old_archive_from_new_cmds else # POSIX demands no paths to be encoded in archives. We have # to avoid creating archives with duplicate basenames if we # might have to extract them afterwards, e.g., when creating a # static archive out of a convenience library, or when linking # the entirety of a libtool archive into another (currently # not supported by libtool). if (for obj in $oldobjs do $echo "X$obj" | $Xsed -e 's%^.*/%%' done | sort | sort -uc >/dev/null 2>&1); then : else $echo "copying selected object files to avoid basename conflicts..." if test -z "$gentop"; then gentop="$output_objdir/${outputname}x" generated="$generated $gentop" $show "${rm}r $gentop" $run ${rm}r "$gentop" $show "$mkdir $gentop" $run $mkdir "$gentop" exit_status=$? if test "$exit_status" -ne 0 && test ! -d "$gentop"; then exit $exit_status fi fi save_oldobjs=$oldobjs oldobjs= counter=1 for obj in $save_oldobjs do objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) while :; do # Make sure we don't pick an alternate name that also # overlaps. newobj=lt$counter-$objbase counter=`expr $counter + 1` case " $oldobjs " in *[\ /]"$newobj "*) ;; *) if test ! -f "$gentop/$newobj"; then break; fi ;; esac done $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" $run ln "$obj" "$gentop/$newobj" || $run cp "$obj" "$gentop/$newobj" oldobjs="$oldobjs $gentop/$newobj" ;; *) oldobjs="$oldobjs $obj" ;; esac done fi eval cmds=\"$old_archive_cmds\" if len=`expr "X$cmds" : ".*"` && test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts $echo "using piecewise archive linking..." save_RANLIB=$RANLIB RANLIB=: objlist= concat_cmds= save_oldobjs=$oldobjs # Is there a better way of finding the last object in the list? for obj in $save_oldobjs do last_oldobj=$obj done for obj in $save_oldobjs do oldobjs="$objlist $obj" objlist="$objlist $obj" eval test_cmds=\"$old_archive_cmds\" if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && test "$len" -le "$max_cmd_len"; then : else # the above command should be used before it gets too long oldobjs=$objlist if test "$obj" = "$last_oldobj" ; then RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" objlist= fi done RANLIB=$save_RANLIB oldobjs=$objlist if test "X$oldobjs" = "X" ; then eval cmds=\"\$concat_cmds\" else eval cmds=\"\$concat_cmds~\$old_archive_cmds\" fi fi fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do eval cmd=\"$cmd\" IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" done if test -n "$generated"; then $show "${rm}r$generated" $run ${rm}r$generated fi # Now create the libtool archive. case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" $show "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` relink_command="$var=\"$var_value\"; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` if test "$hardcode_automatic" = yes ; then relink_command= fi # Only create the output if not a dry run. if test -z "$run"; then for installed in no yes; do if test "$installed" = yes; then if test -z "$install_libdir"; then break fi output="$output_objdir/$outputname"i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE fi newdependency_libs="$newdependency_libs $libdir/$name" ;; *) newdependency_libs="$newdependency_libs $deplib" ;; esac done dependency_libs="$newdependency_libs" newdlfiles= for lib in $dlfiles; do name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE fi newdlfiles="$newdlfiles $libdir/$name" done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE fi newdlprefiles="$newdlprefiles $libdir/$name" done dlprefiles="$newdlprefiles" else newdlfiles= for lib in $dlfiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac newdlfiles="$newdlfiles $abs" done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac newdlprefiles="$newdlprefiles $abs" done dlprefiles="$newdlprefiles" fi $rm $output # place dlname in correct position for cygwin tdlname=$dlname case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; esac $echo > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='$tdlname' # Names of this library. library_names='$library_names' # The name of the static archive. old_library='$old_library' # Libraries that this one depends upon. dependency_libs='$dependency_libs' # Version information for $libname. current=$current age=$age revision=$revision # Is this an already installed library? installed=$installed # Should we warn about portability when linking against -modules? shouldnotlink=$module # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test "$installed" = no && test "$need_relink" = yes; then $echo >> $output "\ relink_command=\"$relink_command\"" fi done fi # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? ;; esac exit $EXIT_SUCCESS ;; # libtool install mode install) modename="$modename: install" # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. $echo "X$nonopt" | grep shtool > /dev/null; then # Aesthetically quote it. arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac install_prog="$arg " arg="$1" shift else install_prog= arg=$nonopt fi # The real first argument should be the name of the installation program. # Aesthetically quote it. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac install_prog="$install_prog$arg" # We need to accept at least all the BSD install flags. dest= files= opts= prev= install_type= isdir=no stripme= for arg do if test -n "$dest"; then files="$files $dest" dest=$arg continue fi case $arg in -d) isdir=yes ;; -f) case " $install_prog " in *[\\\ /]cp\ *) ;; *) prev=$arg ;; esac ;; -g | -m | -o) prev=$arg ;; -s) stripme=" -s" continue ;; -*) ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then prev= else dest=$arg continue fi ;; esac # Aesthetically quote the argument. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac install_prog="$install_prog $arg" done if test -z "$install_prog"; then $echo "$modename: you must specify an install program" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi if test -n "$prev"; then $echo "$modename: the \`$prev' option requires an argument" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi if test -z "$files"; then if test -z "$dest"; then $echo "$modename: no file or destination specified" 1>&2 else $echo "$modename: you must specify a destination" 1>&2 fi $echo "$help" 1>&2 exit $EXIT_FAILURE fi # Strip any trailing slash from the destination. dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` # Check to see that the destination is a directory. test -d "$dest" && isdir=yes if test "$isdir" = yes; then destdir="$dest" destname= else destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` test "X$destdir" = "X$dest" && destdir=. destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` # Not a directory, so check to see that there is only one file specified. set dummy $files if test "$#" -gt 2; then $echo "$modename: \`$dest' is not a directory" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do case $file in *.lo) ;; *) $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE ;; esac done ;; esac # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" staticlibs= future_libdirs= current_libdirs= for file in $files; do # Do each installation. case $file in *.$libext) # Do the static libraries later. staticlibs="$staticlibs $file" ;; *.la) # Check to see that this really is a libtool archive. if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi library_names= old_library= relink_command= # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Add the libdir to current_libdirs if it is the destination. if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; *) current_libdirs="$current_libdirs $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; *) future_libdirs="$future_libdirs $libdir" ;; esac fi dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ test "X$dir" = "X$file/" && dir= dir="$dir$objdir" if test -n "$relink_command"; then # Determine the prefix the user has applied to our future dir. inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that # are installed to the same prefix. # At present, this check doesn't affect windows .dll's that # are installed into $libdir/../bin (currently, that works fine) # but it's something to keep an eye on. if test "$inst_prefix_dir" = "$destdir"; then $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 exit $EXIT_FAILURE fi if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP` else relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP` fi $echo "$modename: warning: relinking \`$file'" 1>&2 $show "$relink_command" if $run eval "$relink_command"; then : else $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 exit $EXIT_FAILURE fi fi # See the names of the shared library. set dummy $library_names if test -n "$2"; then realname="$2" shift shift srcname="$realname" test -n "$relink_command" && srcname="$realname"T # Install the shared library and build the symlinks. $show "$install_prog $dir/$srcname $destdir/$realname" $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? if test -n "$stripme" && test -n "$striplib"; then $show "$striplib $destdir/$realname" $run eval "$striplib $destdir/$realname" || exit $? fi if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. # Try `ln -sf' first, because the `ln' binary might depend on # the symlink we replace! Solaris /bin/ln does not understand -f, # so we also need to try rm && ln -s. for linkname do if test "$linkname" != "$realname"; then $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" fi done fi # Do each command in the postinstall commands. lib="$destdir/$realname" cmds=$postinstall_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' fi exit $lt_exit } done IFS="$save_ifs" fi # Install the pseudo-library for information purposes. name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` instname="$dir/$name"i $show "$install_prog $instname $destdir/$name" $run eval "$install_prog $instname $destdir/$name" || exit $? # Maybe install the static library, too. test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" ;; *.lo) # Install (i.e. copy) a libtool object. # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` destfile="$destdir/$destfile" fi # Deduce the name of the destination old-style object file. case $destfile in *.lo) staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` ;; *.$objext) staticdest="$destfile" destfile= ;; *) $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE ;; esac # Install the libtool object if requested. if test -n "$destfile"; then $show "$install_prog $file $destfile" $run eval "$install_prog $file $destfile" || exit $? fi # Install the old object if enabled. if test "$build_old_libs" = yes; then # Deduce the name of the old-style object file. staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` $show "$install_prog $staticobj $staticdest" $run eval "$install_prog \$staticobj \$staticdest" || exit $? fi exit $EXIT_SUCCESS ;; *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` destfile="$destdir/$destfile" fi # If the file is missing, and there is a .exe on the end, strip it # because it is most likely a libtool script we actually want to # install stripped_ext="" case $file in *.exe) if test ! -f "$file"; then file=`$echo $file|${SED} 's,.exe$,,'` stripped_ext=".exe" fi ;; esac # Do a test to see if this is really a libtool program. case $host in *cygwin*|*mingw*) wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` ;; *) wrapper=$file ;; esac if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then notinst_deplibs= relink_command= # Note that it is not necessary on cygwin/mingw to append a dot to # foo even if both foo and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing # `FILE.' does not work on cygwin managed mounts. # # If there is no directory component, then add one. case $wrapper in */* | *\\*) . ${wrapper} ;; *) . ./${wrapper} ;; esac # Check the variables that should have been set. if test -z "$notinst_deplibs"; then $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 exit $EXIT_FAILURE fi finalize=yes for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then # If there is no directory component, then add one. case $lib in */* | *\\*) . $lib ;; *) . ./$lib ;; esac fi libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 finalize=no fi done relink_command= # Note that it is not necessary on cygwin/mingw to append a dot to # foo even if both foo and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing # `FILE.' does not work on cygwin managed mounts. # # If there is no directory component, then add one. case $wrapper in */* | *\\*) . ${wrapper} ;; *) . ./${wrapper} ;; esac outputname= if test "$fast_install" = no && test -n "$relink_command"; then if test "$finalize" = yes && test -z "$run"; then tmpdir=`func_mktempdir` file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP` $show "$relink_command" if $run eval "$relink_command"; then : else $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 ${rm}r "$tmpdir" continue fi file="$outputname" else $echo "$modename: warning: cannot relink \`$file'" 1>&2 fi else # Install the binary that we compiled earlier. file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another # one anyway case $install_prog,$host in */usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok ;; *.exe:*) destfile=$destfile.exe ;; *:*.exe) destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` ;; esac ;; esac $show "$install_prog$stripme $file $destfile" $run eval "$install_prog\$stripme \$file \$destfile" || exit $? test -n "$outputname" && ${rm}r "$tmpdir" ;; esac done for file in $staticlibs; do name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` # Set up the ranlib parameters. oldlib="$destdir/$name" $show "$install_prog $file $oldlib" $run eval "$install_prog \$file \$oldlib" || exit $? if test -n "$stripme" && test -n "$old_striplib"; then $show "$old_striplib $oldlib" $run eval "$old_striplib $oldlib" || exit $? fi # Do each command in the postinstall commands. cmds=$old_postinstall_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" done if test -n "$future_libdirs"; then $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 fi if test -n "$current_libdirs"; then # Maybe just do a dry run. test -n "$run" && current_libdirs=" -n$current_libdirs" exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' else exit $EXIT_SUCCESS fi ;; # libtool finish mode finish) modename="$modename: finish" libdirs="$nonopt" admincmds= if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for dir do libdirs="$libdirs $dir" done for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. cmds=$finish_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || admincmds="$admincmds $cmd" done IFS="$save_ifs" fi if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" $run eval "$cmds" || admincmds="$admincmds $cmds" fi done fi # Exit here if they wanted silent mode. test "$show" = : && exit $EXIT_SUCCESS $echo "X----------------------------------------------------------------------" | $Xsed $echo "Libraries have been installed in:" for libdir in $libdirs; do $echo " $libdir" done $echo $echo "If you ever happen to want to link against installed libraries" $echo "in a given directory, LIBDIR, you must either use libtool, and" $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" $echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" $echo " during execution" fi if test -n "$runpath_var"; then $echo " - add LIBDIR to the \`$runpath_var' environment variable" $echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" $echo " - use the \`$flag' linker flag" fi if test -n "$admincmds"; then $echo " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi $echo $echo "See any operating system documentation about shared libraries for" $echo "more information, such as the ld(1) and ld.so(8) manual pages." $echo "X----------------------------------------------------------------------" | $Xsed exit $EXIT_SUCCESS ;; # libtool execute mode execute) modename="$modename: execute" # The first argument is the command name. cmd="$nonopt" if test -z "$cmd"; then $echo "$modename: you must specify a COMMAND" 1>&2 $echo "$help" exit $EXIT_FAILURE fi # Handle -dlopen flags immediately. for file in $execute_dlfiles; do if test ! -f "$file"; then $echo "$modename: \`$file' is not a file" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi dir= case $file in *.la) # Check to see that this really is a libtool archive. if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi # Read the libtool library. dlname= library_names= # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Skip this library if it cannot be dlopened. if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" continue fi dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$file" && dir=. if test -f "$dir/$objdir/$dlname"; then dir="$dir/$objdir" else if test ! -f "$dir/$dlname"; then $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 exit $EXIT_FAILURE fi fi ;; *.lo) # Just add the directory containing the .lo file. dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$file" && dir=. ;; *) $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` test -n "$absdir" && dir="$absdir" # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then eval "$shlibpath_var=\"\$dir\"" else eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi done # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. libtool_execute_magic="$magic" # Check if any of the arguments is a wrapper script. args= for file do case $file in -*) ;; *) # Do a test to see if this is really a libtool program. if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Transform arg to wrapped name. file="$progdir/$program" fi ;; esac # Quote arguments (to preserve shell metacharacters). file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` args="$args \"$file\"" done if test -z "$run"; then if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" fi # Restore saved environment variables for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${save_$lt_var+set}\" = set; then $lt_var=\$save_$lt_var; export $lt_var fi" done # Now prepare to actually exec the command. exec_cmd="\$cmd$args" else # Display what would be done. if test -n "$shlibpath_var"; then eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" $echo "export $shlibpath_var" fi $echo "$cmd$args" exit $EXIT_SUCCESS fi ;; # libtool clean and uninstall mode clean | uninstall) modename="$modename: $mode" rm="$nonopt" files= rmforce= exit_status=0 # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" for arg do case $arg in -f) rm="$rm $arg"; rmforce=yes ;; -*) rm="$rm $arg" ;; *) files="$files $arg" ;; esac done if test -z "$rm"; then $echo "$modename: you must specify an RM program" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi rmdirs= origobjdir="$objdir" for file in $files; do dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` if test "X$dir" = "X$file"; then dir=. objdir="$origobjdir" else objdir="$dir/$origobjdir" fi name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` test "$mode" = uninstall && objdir="$dir" # Remember objdir for removal later, being careful to avoid duplicates if test "$mode" = clean; then case " $rmdirs " in *" $objdir "*) ;; *) rmdirs="$rmdirs $objdir" ;; esac fi # Don't error if the file doesn't exist and rm -f was used. if (test -L "$file") >/dev/null 2>&1 \ || (test -h "$file") >/dev/null 2>&1 \ || test -f "$file"; then : elif test -d "$file"; then exit_status=1 continue elif test "$rmforce" = yes; then continue fi rmfiles="$file" case $name in *.la) # Possibly a libtool archive, so verify it. if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then . $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do rmfiles="$rmfiles $objdir/$n" done test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" case "$mode" in clean) case " $library_names " in # " " in the beginning catches empty $dlname *" $dlname "*) ;; *) rmfiles="$rmfiles $objdir/$dlname" ;; esac test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ;; uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. cmds=$postuninstall_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" if test "$?" -ne 0 && test "$rmforce" != yes; then exit_status=1 fi done IFS="$save_ifs" fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. cmds=$old_postuninstall_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" if test "$?" -ne 0 && test "$rmforce" != yes; then exit_status=1 fi done IFS="$save_ifs" fi # FIXME: should reinstall the best remaining shared library. ;; esac fi ;; *.lo) # Possibly a libtool object, so verify it. if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then # Read the .lo file . $dir/$name # Add PIC object to the list of files to remove. if test -n "$pic_object" \ && test "$pic_object" != none; then rmfiles="$rmfiles $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. if test -n "$non_pic_object" \ && test "$non_pic_object" != none; then rmfiles="$rmfiles $dir/$non_pic_object" fi fi ;; *) if test "$mode" = clean ; then noexename=$name case $file in *.exe) file=`$echo $file|${SED} 's,.exe$,,'` noexename=`$echo $name|${SED} 's,.exe$,,'` # $file with .exe has already been added to rmfiles, # add $file without .exe rmfiles="$rmfiles $file" ;; esac # Do a test to see if this is a libtool program. if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then relink_command= . $dir/$noexename # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then rmfiles="$rmfiles $objdir/lt-$name" fi if test "X$noexename" != "X$name" ; then rmfiles="$rmfiles $objdir/lt-${noexename}.c" fi fi fi ;; esac $show "$rm $rmfiles" $run $rm $rmfiles || exit_status=1 done objdir="$origobjdir" # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then $show "rmdir $dir" $run rmdir $dir >/dev/null 2>&1 fi done exit $exit_status ;; "") $echo "$modename: you must specify a MODE" 1>&2 $echo "$generic_help" 1>&2 exit $EXIT_FAILURE ;; esac if test -z "$exec_cmd"; then $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$generic_help" 1>&2 exit $EXIT_FAILURE fi fi # test -z "$show_help" if test -n "$exec_cmd"; then eval exec $exec_cmd exit $EXIT_FAILURE fi # We need to display help for each of the modes. case $mode in "") $echo \ "Usage: $modename [OPTION]... [MODE-ARG]... Provide generalized library-building support services. --config show all configuration variables --debug enable verbose shell tracing -n, --dry-run display commands without modifying any files --features display basic configuration information and exit --finish same as \`--mode=finish' --help display this help message and exit --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] --quiet same as \`--silent' --silent don't print informational messages --tag=TAG use configuration variables from tag TAG --version print version information MODE must be one of the following: clean remove files from the build directory compile compile a source file into a libtool object execute automatically set library path, then run a program finish complete the installation of libtool libraries install install libraries or executables link create a library or an executable uninstall remove libraries from an installed directory MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for a more detailed description of MODE. Report bugs to ." exit $EXIT_SUCCESS ;; clean) $echo \ "Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; compile) $echo \ "Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -prefer-pic try to building PIC objects only -prefer-non-pic try to building non-PIC objects only -static always build a \`.o' file suitable for static linking COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from SOURCEFILE, then substituting the C source code suffix \`.c' with the library object suffix, \`.lo'." ;; execute) $echo \ "Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... Automatically set library path, then run a program. This mode accepts the following additional options: -dlopen FILE add the directory containing FILE to the library path This mode sets the library path environment variable according to \`-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated into their corresponding uninstalled binary, and any of their required library directories are added to the library path. Then, COMMAND is executed, with ARGS as arguments." ;; finish) $echo \ "Usage: $modename [OPTION]... --mode=finish [LIBDIR]... Complete the installation of libtool libraries. Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use the \`--dry-run' option if you just want to see what would be executed." ;; install) $echo \ "Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be either the \`install' or \`cp' program. The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." ;; link) $echo \ "Usage: $modename [OPTION]... --mode=link LINK-COMMAND... Link object files or libraries together to form another library, or to create an executable program. LINK-COMMAND is a command using the C compiler that you would use to create a program from several object files. The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened -no-fast-install disable the fast-install mode -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -objectlist FILE Use a list of object files found in FILE to specify objects -precious-files-regex REGEX don't remove output files matching REGEX -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -static do not do any dynamic linking of uninstalled libtool libraries -static-libtool-libs do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] All other options (arguments beginning with \`-') are ignored. Every other argument is treated as a filename. Files ending in \`.la' are treated as uninstalled libtool libraries, other files are standard or library object files. If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only library objects (\`.lo' files) may be specified, and \`-rpath' is required, except when creating a convenience library. If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created using \`ar' and \`ranlib', or on Windows using \`lib'. If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file is created, otherwise an executable program is created." ;; uninstall) $echo \ "Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; *) $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE ;; esac $echo $echo "Try \`$modename --help' for more information about other modes." exit $? # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting # choices, we go for a static library, that is the most portable, # since we can't tell whether shared libraries were disabled because # the user asked for that or because the platform doesn't support # them. This is particularly important on AIX, because we don't # support having both static and shared libraries enabled at the same # time on that platform, so we default to a shared-only configuration. # If a disable-shared tag is given, we'll fallback to a static-only # configuration. But we'll never go from static-only to shared-only. # ### BEGIN LIBTOOL TAG CONFIG: disable-shared disable_libs=shared # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static disable_libs=static # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: ussp-push-0.11.orig/config.h.in0000644000175000017500000001123011054344465016221 0ustar hendrikhendrik/* config.h.in. Generated from configure.ac by autoheader. */ /* Define to 1 if you have the header file. */ #undef HAVE_ARPA_INET_H /* Define to 1 if you have the `bzero' function. */ #undef HAVE_BZERO /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Define to 1 if your system has a GNU libc compatible `malloc' function, and to 0 otherwise. */ #undef HAVE_MALLOC /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the `memset' function. */ #undef HAVE_MEMSET /* Define to 1 if you have the header file. */ #undef HAVE_NETINET_IN_H /* Define to 1 if you have the `select' function. */ #undef HAVE_SELECT /* Define to 1 if you have the `socket' function. */ #undef HAVE_SOCKET /* Define to 1 if `stat' has the bug that it succeeds when given the zero-length file name argument. */ #undef HAVE_STAT_EMPTY_STRING_BUG /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the `strcasecmp' function. */ #undef HAVE_STRCASECMP /* Define to 1 if you have the `strchr' function. */ #undef HAVE_STRCHR /* Define to 1 if you have the `strdup' function. */ #undef HAVE_STRDUP /* Define to 1 if you have the `strerror' function. */ #undef HAVE_STRERROR /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the `strrchr' function. */ #undef HAVE_STRRCHR /* Define to 1 if you have the header file. */ #undef HAVE_SYS_IOCTL_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_SELECT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_SOCKET_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TIME_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_TERMIOS_H /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Define to 1 if `lstat' dereferences a symlink specified with a trailing slash. */ #undef LSTAT_FOLLOWS_SLASHED_SYMLINK /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define to the type of arg 1 for `select'. */ #undef SELECT_TYPE_ARG1 /* Define to the type of args 2, 3 and 4 for `select'. */ #undef SELECT_TYPE_ARG234 /* Define to the type of arg 5 for `select'. */ #undef SELECT_TYPE_ARG5 /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Define to 1 if you can safely include both and . */ #undef TIME_WITH_SYS_TIME /* Version number of package */ #undef VERSION /* Define for Solaris 2.5.1 so the uint32_t typedef from , , or is not used. If the typedef was allowed, the #define below would cause a syntax error. */ #undef _UINT32_T /* Define for Solaris 2.5.1 so the uint8_t typedef from , , or is not used. If the typedef was allowed, the #define below would cause a syntax error. */ #undef _UINT8_T /* Define to empty if `const' does not conform to ANSI C. */ #undef const /* Define to the type of a signed integer type of width exactly 16 bits if such a type exists and the standard includes do not define it. */ #undef int16_t /* Define to rpl_malloc if the replacement function should be used. */ #undef malloc /* Define to the type of an unsigned integer type of width exactly 16 bits if such a type exists and the standard includes do not define it. */ #undef uint16_t /* Define to the type of an unsigned integer type of width exactly 32 bits if such a type exists and the standard includes do not define it. */ #undef uint32_t /* Define to the type of an unsigned integer type of width exactly 8 bits if such a type exists and the standard includes do not define it. */ #undef uint8_t ussp-push-0.11.orig/configure0000755000175000017500000265735711054344465016141 0ustar hendrikhendrik#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.61 for ussp-push 0.11.1. # # Report bugs to >. # # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, # 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi # PATH needs CR # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) as_nl=' ' IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 { (exit 1); exit 1; } fi # Work around bugs in pre-3.0 UWIN ksh. for as_var in ENV MAIL MAILPATH do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. for as_var in \ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ LC_TELEPHONE LC_TIME do if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var fi done # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # CDPATH. $as_unset CDPATH if test "x$CONFIG_SHELL" = x; then if (eval ":") 2>/dev/null; then as_have_required=yes else as_have_required=no fi if test $as_have_required = yes && (eval ": (as_func_return () { (exit \$1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = \"\$1\" ); then : else exitcode=1 echo positional parameters were not saved. fi test \$exitcode = 0) || { (exit 1); exit 1; } ( as_lineno_1=\$LINENO as_lineno_2=\$LINENO test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } ") 2> /dev/null; then : else as_candidate_shells= as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. case $as_dir in /*) for as_base in sh bash ksh sh5; do as_candidate_shells="$as_candidate_shells $as_dir/$as_base" done;; esac done IFS=$as_save_IFS for as_shell in $as_candidate_shells $SHELL; do # Try only shells that exist, to save several forks. if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { ("$as_shell") 2> /dev/null <<\_ASEOF if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi : _ASEOF }; then CONFIG_SHELL=$as_shell as_have_required=yes if { "$as_shell" 2> /dev/null <<\_ASEOF if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi : (as_func_return () { (exit $1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = "$1" ); then : else exitcode=1 echo positional parameters were not saved. fi test $exitcode = 0) || { (exit 1); exit 1; } ( as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } _ASEOF }; then break fi fi done if test "x$CONFIG_SHELL" != x; then for as_var in BASH_ENV ENV do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done export CONFIG_SHELL exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} fi if test $as_have_required = no; then echo This script requires a shell more modern than all the echo shells that I found on your system. Please install a echo modern shell, or manually run the script under such a echo shell if you do have one. { (exit 1); exit 1; } fi fi fi (eval "as_func_return () { (exit \$1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = \"\$1\" ); then : else exitcode=1 echo positional parameters were not saved. fi test \$exitcode = 0") || { echo No shell found that supports shell functions. echo Please tell autoconf@gnu.org about your system, echo including any error possibly output before this echo message } as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line after each line using $LINENO; the second 'sed' # does the real work. The second script uses 'N' to pair each # line-number line with the line containing $LINENO, and appends # trailing '-' during substitution so that $LINENO is not a special # case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # scripts with optimization help from Paolo Bonzini. Blame Lee # E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in -n*) case `echo 'x\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. *) ECHO_C='\c';; esac;; *) ECHO_N='-n';; esac if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir fi echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" # Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} case X$ECHO in X*--fallback-echo) # Remove one level of quotation (which was required for Make). ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` ;; esac echo=${ECHO-echo} if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X$1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then # Yippee, $echo works! : else # Restart under the correct shell. exec $SHELL "$0" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then # used as fallback echo shift cat </dev/null 2>&1 && unset CDPATH if test -z "$ECHO"; then if test "X${echo_test_string+set}" != Xset; then # find a string as large as possible, as long as the shell can cope with it for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... if (echo_test_string=`eval $cmd`) 2>/dev/null && echo_test_string=`eval $cmd` && (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null then break fi done fi if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then : else # The Solaris, AIX, and Digital Unix default echo programs unquote # backslashes. This makes it impossible to quote backslashes using # echo "$something" | sed 's/\\/\\\\/g' # # So, first we look for a working echo in the user's PATH. lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for dir in $PATH /usr/ucb; do IFS="$lt_save_ifs" if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$dir/echo" break fi done IFS="$lt_save_ifs" if test "X$echo" = Xecho; then # We didn't find a better echo, so look for alternatives. if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # This shell has a builtin print -r that does the trick. echo='print -r' elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && test "X$CONFIG_SHELL" != X/bin/ksh; then # If we have ksh, try running configure again with it. ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} export ORIGINAL_CONFIG_SHELL CONFIG_SHELL=/bin/ksh export CONFIG_SHELL exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} else # Try using printf. echo='printf %s\n' if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # Cool, printf works : elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL export CONFIG_SHELL SHELL="$CONFIG_SHELL" export SHELL echo="$CONFIG_SHELL $0 --fallback-echo" elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$CONFIG_SHELL $0 --fallback-echo" else # maybe with a smaller string... prev=: for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null then break fi prev="$cmd" done if test "$prev" != 'sed 50q "$0"'; then echo_test_string=`eval $prev` export echo_test_string exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} else # Oops. We lost completely, so just stick with echo. echo=echo fi fi fi fi fi fi # Copy echo and quote the copy suitably for passing to libtool from # the Makefile, instead of quoting the original, which is used later. ECHO=$echo if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" fi tagnames=${tagnames+${tagnames},}CXX tagnames=${tagnames+${tagnames},}F77 exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='ussp-push' PACKAGE_TARNAME='ussp-push' PACKAGE_VERSION='0.11.1' PACKAGE_STRING='ussp-push 0.11.1' PACKAGE_BUGREPORT='Davide Libenzi ' ac_unique_file="src/obex_socket.h" # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datarootdir datadir sysconfdir sharedstatedir localstatedir includedir oldincludedir docdir infodir htmldir dvidir pdfdir psdir libdir localedir mandir DEFS ECHO_C ECHO_N ECHO_T LIBS build_alias host_alias target_alias INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os SED GREP EGREP LN_S ECHO AR RANLIB DSYMUTIL NMEDIT CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL PKG_CONFIG BLUETOOTH_CFLAGS BLUETOOTH_LIBS OPENOBEX_CFLAGS OPENOBEX_LIBS LIBOBJS LTLIBOBJS' ac_subst_files='' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS CPP CXX CXXFLAGS CCC CXXCPP F77 FFLAGS PKG_CONFIG BLUETOOTH_CFLAGS BLUETOOTH_LIBS OPENOBEX_CFLAGS OPENOBEX_LIBS' # Initialize some variables set by options. ac_init_help= ac_init_version=false # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` eval enable_$ac_feature=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` eval enable_$ac_feature=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } ac_package=`echo $ac_package | sed 's/[-.]/_/g'` eval with_$ac_package=\$ac_optarg ;; -without-* | --without-*) ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } ac_package=`echo $ac_package | sed 's/[-.]/_/g'` eval with_$ac_package=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) { echo "$as_me: error: unrecognized option: $ac_option Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 { (exit 1); exit 1; }; } eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` { echo "$as_me: error: missing argument to $ac_option" >&2 { (exit 1); exit 1; }; } fi # Be sure to have absolute directory names. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; } done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || { echo "$as_me: error: Working directory cannot be determined" >&2 { (exit 1); exit 1; }; } test "X$ac_ls_di" = "X$ac_pwd_ls_di" || { echo "$as_me: error: pwd does not report name of working directory" >&2 { (exit 1); exit 1; }; } # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$0" || $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$0" : 'X\(//\)[^/]' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || echo X"$0" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 { (exit 1); exit 1; }; } fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 { (exit 1); exit 1; }; } pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures ussp-push 0.11.1 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/ussp-push] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of ussp-push 0.11.1:";; esac cat <<\_ACEOF Optional Features: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors --enable-shared[=PKGS] build shared libraries [default=yes] --enable-static[=PKGS] build static libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-pic try to use only PIC/non-PIC objects [default=use both] --with-tags[=TAGS] include additional configurations [automatic] Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor CXX C++ compiler command CXXFLAGS C++ compiler flags CXXCPP C++ preprocessor F77 Fortran 77 compiler command FFLAGS Fortran 77 compiler flags PKG_CONFIG path to pkg-config utility BLUETOOTH_CFLAGS C compiler flags for BLUETOOTH, overriding pkg-config BLUETOOTH_LIBS linker flags for BLUETOOTH, overriding pkg-config OPENOBEX_CFLAGS C compiler flags for OPENOBEX, overriding pkg-config OPENOBEX_LIBS linker flags for OPENOBEX, overriding pkg-config Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to >. _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF ussp-push configure 0.11.1 generated by GNU Autoconf 2.61 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by ussp-push $as_me 0.11.1, which was generated by GNU Autoconf 2.61. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; 2) ac_configure_args1="$ac_configure_args1 '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac done done $as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## ## ---------------- ## _ASBOX echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( *) $as_unset $ac_var ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo cat <<\_ASBOX ## ----------------- ## ## Output variables. ## ## ----------------- ## _ASBOX echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then cat <<\_ASBOX ## ------------------- ## ## File substitutions. ## ## ------------------- ## _ASBOX echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## ## confdefs.h. ## ## ----------- ## _ASBOX echo cat confdefs.h echo fi test "$ac_signal" != 0 && echo "$as_me: caught signal $ac_signal" echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer explicitly selected file to automatically selected ones. if test -n "$CONFIG_SITE"; then set x "$CONFIG_SITE" elif test "x$prefix" != xNONE; then set x "$prefix/share/config.site" "$prefix/etc/config.site" else set x "$ac_default_prefix/share/config.site" \ "$ac_default_prefix/etc/config.site" fi shift for ac_site_file do if test -r "$ac_site_file"; then { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special # files actually), so we avoid doing that. if test -f "$cache_file"; then { echo "$as_me:$LINENO: loading cache $cache_file" >&5 echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { echo "$as_me:$LINENO: creating cache $cache_file" >&5 echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 echo "$as_me: former value: $ac_old_val" >&2;} { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 echo "$as_me: current value: $ac_new_val" >&2;} ac_cache_corrupted=: fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 echo "$as_me: error: changes in the environment can compromise the build" >&2;} { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_config_headers="$ac_config_headers config.h" am__api_version="1.9" ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} { (exit 1); exit 1; }; } fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. { echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi done done ;; esac done IFS=$as_save_IFS fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { echo "$as_me:$LINENO: result: $INSTALL" >&5 echo "${ECHO_T}$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { echo "$as_me:$LINENO: checking whether build environment is sane" >&5 echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&5 echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&2;} { (exit 1); exit 1; }; } fi test "$2" = conftest.file ) then # Ok. : else { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! Check your system clock" >&5 echo "$as_me: error: newly created file is older than distributed files! Check your system clock" >&2;} { (exit 1); exit 1; }; } fi { echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6; } test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. echo might interpret backslashes. # By default was `s,x,x', remove it if useless. cat <<\_ACEOF >conftest.sed s/[\\$]/&&/g;s/;s,x,x,$// _ACEOF program_transform_name=`echo $program_transform_name | sed -f conftest.sed` rm -f conftest.sed # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then # We used to keeping the `.' as first argument, in order to # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) # where $(somedir) is conditionally defined. However this is wrong # for two reasons: # 1. if the package is installed by a user who cannot write `.' # make install will fail, # 2. the above comment should most certainly read # $(mkdir_p) $(DESTDIR)$(somedir) # so it does not work when $(somedir) is undefined and # $(DESTDIR) is not. # To support the latter case, we have to write # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), # so the `.' trick is pointless. mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as # directories to create, and then abort because `.' already # exists. for d in ./-p ./--version; do test -d $d && rmdir $d done # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. if test -f "$ac_aux_dir/mkinstalldirs"; then mkdir_p='$(mkinstalldirs)' else mkdir_p='$(install_sh) -d' fi fi for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_AWK+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { echo "$as_me:$LINENO: result: $AWK" >&5 echo "${ECHO_T}$AWK" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -n "$AWK" && break done { echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6; } SET_MAKE= else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null # test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; } fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE='ussp-push' VERSION='0.11.1' cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} install_sh=${install_sh-"$am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { echo "$as_me:$LINENO: result: $STRIP" >&5 echo "${ECHO_T}$STRIP" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 echo "${ECHO_T}$ac_ct_STRIP" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. AMTAR=${AMTAR-"${am_missing_run}tar"} am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' # Checks for programs. ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&5 echo "$as_me: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. echo "$as_me:$LINENO: checking for C compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (ac_try="$ac_compiler --version >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -v >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler -v >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -V >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler -V >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # # List of possible output files, starting from the most likely. # The algorithm is not robust to junk in `.', hence go to wildcards (a.*) # only as a last resort. b.out is created by i960 compilers. ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' # # The IRIX 6 linker writes into existing files which may not be # executable, retaining their permissions. Remove them first so a # subsequent execution test works. ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { (ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link_default") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi { echo "$as_me:$LINENO: result: $ac_file" >&5 echo "${ECHO_T}$ac_file" >&6; } if test -z "$ac_file"; then echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { echo "$as_me:$LINENO: error: C compiler cannot create executables See \`config.log' for more details." >&5 echo "$as_me: error: C compiler cannot create executables See \`config.log' for more details." >&2;} { (exit 77); exit 77; }; } fi ac_exeext=$ac_cv_exeext # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { echo "$as_me:$LINENO: checking whether the C compiler works" >&5 echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 # If not cross compiling, check that we can run a simple program. if test "$cross_compiling" != yes; then if { ac_try='./$ac_file' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { echo "$as_me:$LINENO: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&5 echo "$as_me: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi fi fi { echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6; } rm -f a.out a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } { echo "$as_me:$LINENO: result: $cross_compiling" >&5 echo "${ECHO_T}$cross_compiling" >&6; } { echo "$as_me:$LINENO: checking for suffix of executables" >&5 echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&5 echo "$as_me: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi rm -f conftest$ac_cv_exeext { echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 echo "${ECHO_T}$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT { echo "$as_me:$LINENO: checking for suffix of object files" >&5 echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } if test "${ac_cv_objext+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&5 echo "$as_me: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 echo "${ECHO_T}$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } GCC=`test $ac_compiler_gnu = yes && echo yes` ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 CFLAGS="" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } if test "${ac_cv_prog_cc_c89+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_c89=$ac_arg else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { echo "$as_me:$LINENO: result: none needed" >&5 echo "${ECHO_T}none needed" >&6; } ;; xno) { echo "$as_me:$LINENO: result: unsupported" >&5 echo "${ECHO_T}unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; esac ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo done .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # We grep out `Entering directory' and `Leaving directory' # messages which can occur if `w' ends up in MAKEFLAGS. # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU fi # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then am__include=.include am__quote="\"" _am_result=BSD fi fi { echo "$as_me:$LINENO: result: $_am_result" >&5 echo "${ECHO_T}$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi depcc="$CC" am_compiler_list= { echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. { echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi done done ;; esac done IFS=$as_save_IFS fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { echo "$as_me:$LINENO: result: $INSTALL" >&5 echo "${ECHO_T}$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' # Check whether --enable-shared was given. if test "${enable_shared+set}" = set; then enableval=$enable_shared; p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac else enable_shared=yes fi # Check whether --enable-static was given. if test "${enable_static+set}" = set; then enableval=$enable_static; p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac else enable_static=yes fi # Check whether --enable-fast-install was given. if test "${enable_fast_install+set}" = set; then enableval=$enable_fast_install; p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac else enable_fast_install=yes fi # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} { (exit 1); exit 1; }; } { echo "$as_me:$LINENO: checking build system type" >&5 echo $ECHO_N "checking build system type... $ECHO_C" >&6; } if test "${ac_cv_build+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 echo "$as_me: error: cannot guess build type; you must specify one" >&2;} { (exit 1); exit 1; }; } ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} { (exit 1); exit 1; }; } fi { echo "$as_me:$LINENO: result: $ac_cv_build" >&5 echo "${ECHO_T}$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; *) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 echo "$as_me: error: invalid value of canonical build" >&2;} { (exit 1); exit 1; }; };; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' set x $ac_cv_build shift build_cpu=$1 build_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: build_os=$* IFS=$ac_save_IFS case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac { echo "$as_me:$LINENO: checking host system type" >&5 echo $ECHO_N "checking host system type... $ECHO_C" >&6; } if test "${ac_cv_host+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} { (exit 1); exit 1; }; } fi fi { echo "$as_me:$LINENO: result: $ac_cv_host" >&5 echo "${ECHO_T}$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; *) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 echo "$as_me: error: invalid value of canonical host" >&2;} { (exit 1); exit 1; }; };; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' set x $ac_cv_host shift host_cpu=$1 host_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: host_os=$* IFS=$ac_save_IFS case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac { echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; } if test "${lt_cv_path_SED+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # Loop through the user's path and test for sed and gsed. # Then use that list of sed's as ones to test for truncation. as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for lt_ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" fi done done done IFS=$as_save_IFS lt_ac_max=0 lt_ac_count=0 # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do test ! -f $lt_ac_sed && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in # Check for GNU sed and select it if it is found. if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then lt_cv_path_SED=$lt_ac_sed break fi while true; do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo >>conftest.nl $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break cmp -s conftest.out conftest.nl || break # 10000 chars as input seems more than enough test $lt_ac_count -gt 10 && break lt_ac_count=`expr $lt_ac_count + 1` if test $lt_ac_count -gt $lt_ac_max; then lt_ac_max=$lt_ac_count lt_cv_path_SED=$lt_ac_sed fi done done fi SED=$lt_cv_path_SED { echo "$as_me:$LINENO: result: $SED" >&5 echo "${ECHO_T}$SED" >&6; } { echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } if test "${ac_cv_path_GREP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # Extract the first word of "grep ggrep" to use in msg output if test -z "$GREP"; then set dummy grep ggrep; ac_prog_name=$2 if test "${ac_cv_path_GREP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS fi GREP="$ac_cv_path_GREP" if test -z "$GREP"; then { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} { (exit 1); exit 1; }; } fi else ac_cv_path_GREP=$GREP fi fi { echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 echo "${ECHO_T}$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { echo "$as_me:$LINENO: checking for egrep" >&5 echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } if test "${ac_cv_path_EGREP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else # Extract the first word of "egrep" to use in msg output if test -z "$EGREP"; then set dummy egrep; ac_prog_name=$2 if test "${ac_cv_path_EGREP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS fi EGREP="$ac_cv_path_EGREP" if test -z "$EGREP"; then { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} { (exit 1); exit 1; }; } fi else ac_cv_path_EGREP=$EGREP fi fi fi { echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { echo "$as_me:$LINENO: checking for GNU ld" >&5 echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } else { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } fi if test "${lt_cv_path_LD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 echo "${ECHO_T}$LD" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} { (exit 1); exit 1; }; } { echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } if test "${lt_cv_prog_gnu_ld+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld { echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } if test "${lt_cv_ld_reload_flag+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_ld_reload_flag='-r' fi { echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } reload_flag=$lt_cv_ld_reload_flag case $reload_flag in "" | " "*) ;; *) reload_flag=" $reload_flag" ;; esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in darwin*) if test "$GCC" = yes; then reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' else reload_cmds='$LD$reload_flag -o $output$reload_objs' fi ;; esac { echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; } if test "${lt_cv_path_NM+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi fi { echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 echo "${ECHO_T}$lt_cv_path_NM" >&6; } NM="$lt_cv_path_NM" { echo "$as_me:$LINENO: checking whether ln -s works" >&5 echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then { echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6; } else { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 echo "${ECHO_T}no, using $LN_S" >&6; } fi { echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; } if test "${lt_cv_deplibs_check_method+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given extended regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix[4-9]*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi[45]*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin*) # func_win32_libid is a shell function defined in ltmain.sh lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' ;; mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. if ( file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[3-9]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux* | k*bsd*-gnu) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; nto-qnx*) lt_cv_deplibs_check_method=unknown ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; esac fi { echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then enableval=$enable_libtool_lock; fi test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '#line 4403 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ s390*-*linux*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_i386" ;; ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; ppc*-*linux*|powerpc*-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } if test "${lt_cv_cc_needs_belf+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then lt_cv_cc_needs_belf=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 lt_cv_cc_needs_belf=no fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu fi { echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; sparc*-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) LD="${LD-ld} -m elf64_sparc" ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks="$enable_libtool_lock" ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if test "${ac_cv_prog_CPP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then # Broken: success on invalid input. continue else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { echo "$as_me:$LINENO: result: $CPP" >&5 echo "${ECHO_T}$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then # Broken: success on invalid input. continue else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." >&5 echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { echo "$as_me:$LINENO: checking for ANSI C header files" >&5 echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } if test "${ac_cv_header_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi { echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 echo "${ECHO_T}$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF #define STDC_HEADERS 1 _ACEOF fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` { echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi ac_res=`eval echo '${'$as_ac_Header'}'` { echo "$as_me:$LINENO: result: $ac_res" >&5 echo "${ECHO_T}$ac_res" >&6; } if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in dlfcn.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi ac_res=`eval echo '${'$as_ac_Header'}'` { echo "$as_me:$LINENO: result: $ac_res" >&5 echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? { echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? { echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------------------- ## ## Report this to Davide Libenzi ## ## ------------------------------------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval echo '${'$as_ac_Header'}'` { echo "$as_me:$LINENO: result: $ac_res" >&5 echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu if test -z "$CXX"; then if test -n "$CCC"; then CXX=$CCC else if test -n "$ac_tool_prefix"; then for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CXX+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CXX"; then ac_cv_prog_CXX="$CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CXX=$ac_cv_prog_CXX if test -n "$CXX"; then { echo "$as_me:$LINENO: result: $CXX" >&5 echo "${ECHO_T}$CXX" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -n "$CXX" && break done fi if test -z "$CXX"; then ac_ct_CXX=$CXX for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CXX"; then ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CXX="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CXX=$ac_cv_prog_ac_ct_CXX if test -n "$ac_ct_CXX"; then { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 echo "${ECHO_T}$ac_ct_CXX" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -n "$ac_ct_CXX" && break done if test "x$ac_ct_CXX" = x; then CXX="g++" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac CXX=$ac_ct_CXX fi fi fi fi # Provide some information about the compiler. echo "$as_me:$LINENO: checking for C++ compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (ac_try="$ac_compiler --version >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -v >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler -v >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -V >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler -V >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; } if test "${ac_cv_cxx_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_cxx_compiler_gnu=$ac_compiler_gnu fi { echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; } GXX=`test $ac_compiler_gnu = yes && echo yes` ac_test_CXXFLAGS=${CXXFLAGS+set} ac_save_CXXFLAGS=$CXXFLAGS { echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; } if test "${ac_cv_prog_cxx_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_save_cxx_werror_flag=$ac_cxx_werror_flag ac_cxx_werror_flag=yes ac_cv_prog_cxx_g=no CXXFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cxx_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 CXXFLAGS="" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cxx_werror_flag=$ac_save_cxx_werror_flag CXXFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cxx_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cxx_werror_flag=$ac_save_cxx_werror_flag fi { echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; } if test "$ac_test_CXXFLAGS" = set; then CXXFLAGS=$ac_save_CXXFLAGS elif test $ac_cv_prog_cxx_g = yes; then if test "$GXX" = yes; then CXXFLAGS="-g -O2" else CXXFLAGS="-g" fi else if test "$GXX" = yes; then CXXFLAGS="-O2" else CXXFLAGS= fi fi ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu depcc="$CXX" am_compiler_list= { echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CXX_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CXX_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CXX_dependencies_compiler_type=none fi fi { echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; } CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then am__fastdepCXX_TRUE= am__fastdepCXX_FALSE='#' else am__fastdepCXX_TRUE='#' am__fastdepCXX_FALSE= fi if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu { echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; } if test -z "$CXXCPP"; then if test "${ac_cv_prog_CXXCPP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # Double quotes because CXXCPP needs to be expanded for CXXCPP in "$CXX -E" "/lib/cpp" do ac_preproc_ok=false for ac_cxx_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then # Broken: success on invalid input. continue else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then break fi done ac_cv_prog_CXXCPP=$CXXCPP fi CXXCPP=$ac_cv_prog_CXXCPP else ac_cv_prog_CXXCPP=$CXXCPP fi { echo "$as_me:$LINENO: result: $CXXCPP" >&5 echo "${ECHO_T}$CXXCPP" >&6; } ac_preproc_ok=false for ac_cxx_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then # Broken: success on invalid input. continue else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check See \`config.log' for more details." >&5 echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu fi ac_ext=f ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_f77_compiler_gnu if test -n "$ac_tool_prefix"; then for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_F77+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$F77"; then ac_cv_prog_F77="$F77" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_F77="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi F77=$ac_cv_prog_F77 if test -n "$F77"; then { echo "$as_me:$LINENO: result: $F77" >&5 echo "${ECHO_T}$F77" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -n "$F77" && break done fi if test -z "$F77"; then ac_ct_F77=$F77 for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_F77+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_F77"; then ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_F77="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_F77=$ac_cv_prog_ac_ct_F77 if test -n "$ac_ct_F77"; then { echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 echo "${ECHO_T}$ac_ct_F77" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -n "$ac_ct_F77" && break done if test "x$ac_ct_F77" = x; then F77="" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac F77=$ac_ct_F77 fi fi # Provide some information about the compiler. echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (ac_try="$ac_compiler --version >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -v >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler -v >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -V >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler -V >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } rm -f a.out # If we don't use `.F' as extension, the preprocessor is not run on the # input file. (Note that this only needs to work for GNU compilers.) ac_save_ext=$ac_ext ac_ext=F { echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6; } if test "${ac_cv_f77_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF program main #ifndef __GNUC__ choke me #endif end _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_f77_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_f77_compiler_gnu=$ac_compiler_gnu fi { echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6; } ac_ext=$ac_save_ext ac_test_FFLAGS=${FFLAGS+set} ac_save_FFLAGS=$FFLAGS FFLAGS= { echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6; } if test "${ac_cv_prog_f77_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else FFLAGS=-g cat >conftest.$ac_ext <<_ACEOF program main end _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_f77_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_f77_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_prog_f77_g=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 echo "${ECHO_T}$ac_cv_prog_f77_g" >&6; } if test "$ac_test_FFLAGS" = set; then FFLAGS=$ac_save_FFLAGS elif test $ac_cv_prog_f77_g = yes; then if test "x$ac_cv_f77_compiler_gnu" = xyes; then FFLAGS="-g -O2" else FFLAGS="-g" fi else if test "x$ac_cv_f77_compiler_gnu" = xyes; then FFLAGS="-O2" else FFLAGS= fi fi G77=`test $ac_compiler_gnu = yes && echo yes` ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! # find the maximum length of command line arguments { echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } if test "${lt_cv_sys_max_cmd_len+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ = "XX$teststring") >/dev/null 2>&1 && new_result=`expr "X$teststring" : ".*" 2>&1` && lt_cv_sys_max_cmd_len=$new_result && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done teststring= # Add a significant safety factor because C++ compilers can tack on massive # amounts of additional arguments before passing them to the linker. # It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac fi if test -n $lt_cv_sys_max_cmd_len ; then { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } else { echo "$as_me:$LINENO: result: none" >&5 echo "${ECHO_T}none" >&6; } fi # Check for command to grab the raw symbol name followed by C symbol from nm. { echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[BCDEGRST]' # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' # Transform an extracted symbol line into a proper C declaration lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" # Define system-specific variables. case $host_os in aix*) symcode='[BCDT]' ;; cygwin* | mingw* | pw32*) symcode='[ABCDGISTW]' ;; hpux*) # Its linker distinguishes data from code symbols if test "$host_cpu" = ia64; then symcode='[ABCDEGRST]' fi lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; linux* | k*bsd*-gnu) if test "$host_cpu" = ia64; then symcode='[ABCDGIRSTW]' lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" fi ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; osf*) symcode='[BCDEGQRST]' ;; solaris*) symcode='[BDRT]' ;; sco3.2v5*) symcode='[DT]' ;; sysv4.2uw2*) symcode='[DT]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[ABDT]' ;; sysv4) symcode='[DFNSTU]' ;; esac # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[ABCDGIRSTW]' ;; esac # Try without a prefix undercore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Now try to grab the symbols. nlist=conftest.nm if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if grep ' nm_test_var$' "$nlist" >/dev/null; then if grep ' nm_test_func$' "$nlist" >/dev/null; then cat < conftest.$ac_ext #ifdef __cplusplus extern "C" { #endif EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' cat <> conftest.$ac_ext #if defined (__STDC__) && __STDC__ # define lt_ptr_t void * #else # define lt_ptr_t char * # define const #endif /* The mapping between symbol names and symbols. */ const struct { const char *name; lt_ptr_t address; } lt_preloaded_symbols[] = { EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext cat <<\EOF >> conftest.$ac_ext {0, (lt_ptr_t) 0} }; #ifdef __cplusplus } #endif EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_save_LIBS="$LIBS" lt_save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS="$lt_save_LIBS" CFLAGS="$lt_save_CFLAGS" else echo "cannot find nm_test_func in $nlist" >&5 fi else echo "cannot find nm_test_var in $nlist" >&5 fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 fi else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done fi if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then { echo "$as_me:$LINENO: result: failed" >&5 echo "${ECHO_T}failed" >&6; } else { echo "$as_me:$LINENO: result: ok" >&5 echo "${ECHO_T}ok" >&6; } fi { echo "$as_me:$LINENO: checking for objdir" >&5 echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } if test "${lt_cv_objdir+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null fi { echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 echo "${ECHO_T}$lt_cv_objdir" >&6; } objdir=$lt_cv_objdir case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='sed -e 1s/^X//' sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' # Constants: rm="rm -f" # Global variables: default_ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a ltmain="$ac_aux_dir/ltmain.sh" ofile="$default_ofile" with_gnu_ld="$lt_cv_prog_gnu_ld" if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. set dummy ${ac_tool_prefix}ar; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_AR+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$AR"; then ac_cv_prog_AR="$AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AR="${ac_tool_prefix}ar" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then { echo "$as_me:$LINENO: result: $AR" >&5 echo "${ECHO_T}$AR" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$ac_cv_prog_AR"; then ac_ct_AR=$AR # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_AR+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_AR"; then ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_AR="ar" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 echo "${ECHO_T}$ac_ct_AR" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "x$ac_ct_AR" = x; then AR="false" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac AR=$ac_ct_AR fi else AR="$ac_cv_prog_AR" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then { echo "$as_me:$LINENO: result: $RANLIB" >&5 echo "${ECHO_T}$RANLIB" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_RANLIB="ranlib" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 echo "${ECHO_T}$ac_ct_RANLIB" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "x$ac_ct_RANLIB" = x; then RANLIB=":" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac RANLIB=$ac_ct_RANLIB fi else RANLIB="$ac_cv_prog_RANLIB" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { echo "$as_me:$LINENO: result: $STRIP" >&5 echo "${ECHO_T}$STRIP" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 echo "${ECHO_T}$ac_ct_STRIP" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$AR" && AR=ar test -z "$AR_FLAGS" && AR_FLAGS=cru test -z "$AS" && AS=as test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$DLLTOOL" && DLLTOOL=dlltool test -z "$LD" && LD=ld test -z "$LN_S" && LN_S="ln -s" test -z "$MAGIC_CMD" && MAGIC_CMD=file test -z "$NM" && NM=nm test -z "$SED" && SED=sed test -z "$OBJDUMP" && OBJDUMP=objdump test -z "$RANLIB" && RANLIB=: test -z "$STRIP" && STRIP=: test -z "$ac_objext" && ac_objext=o # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } if test "${lt_cv_path_MAGIC_CMD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/${ac_tool_prefix}file; then lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 echo "${ECHO_T}$MAGIC_CMD" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then { echo "$as_me:$LINENO: checking for file" >&5 echo $ECHO_N "checking for file... $ECHO_C" >&6; } if test "${lt_cv_path_MAGIC_CMD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/file; then lt_cv_path_MAGIC_CMD="$ac_dir/file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 echo "${ECHO_T}$MAGIC_CMD" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi else MAGIC_CMD=: fi fi fi ;; esac case $host_os in rhapsody* | darwin*) if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_DSYMUTIL+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$DSYMUTIL"; then ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DSYMUTIL=$ac_cv_prog_DSYMUTIL if test -n "$DSYMUTIL"; then { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 echo "${ECHO_T}$DSYMUTIL" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$ac_cv_prog_DSYMUTIL"; then ac_ct_DSYMUTIL=$DSYMUTIL # Extract the first word of "dsymutil", so it can be a program name with args. set dummy dsymutil; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_DSYMUTIL"; then ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL if test -n "$ac_ct_DSYMUTIL"; then { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "x$ac_ct_DSYMUTIL" = x; then DSYMUTIL=":" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac DSYMUTIL=$ac_ct_DSYMUTIL fi else DSYMUTIL="$ac_cv_prog_DSYMUTIL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. set dummy ${ac_tool_prefix}nmedit; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_NMEDIT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$NMEDIT"; then ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi NMEDIT=$ac_cv_prog_NMEDIT if test -n "$NMEDIT"; then { echo "$as_me:$LINENO: result: $NMEDIT" >&5 echo "${ECHO_T}$NMEDIT" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$ac_cv_prog_NMEDIT"; then ac_ct_NMEDIT=$NMEDIT # Extract the first word of "nmedit", so it can be a program name with args. set dummy nmedit; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_NMEDIT"; then ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_NMEDIT="nmedit" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT if test -n "$ac_ct_NMEDIT"; then { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 echo "${ECHO_T}$ac_ct_NMEDIT" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "x$ac_ct_NMEDIT" = x; then NMEDIT=":" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac NMEDIT=$ac_ct_NMEDIT fi else NMEDIT="$ac_cv_prog_NMEDIT" fi { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; } if test "${lt_cv_apple_cc_single_mod+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. echo "int foo(void){return 1;}" > conftest.c $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib ${wl}-single_module conftest.c if test -f libconftest.dylib; then lt_cv_apple_cc_single_mod=yes rm -rf libconftest.dylib* fi rm conftest.c fi fi { echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; } { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; } if test "${lt_cv_ld_exported_symbols_list+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then lt_cv_ld_exported_symbols_list=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 lt_cv_ld_exported_symbols_list=no fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi { echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; } case $host_os in rhapsody* | darwin1.[0123]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[91]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[012]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}" fi if test "$DSYMUTIL" != ":"; then _lt_dsymutil="~$DSYMUTIL \$lib || :" else _lt_dsymutil= fi ;; esac enable_dlopen=no enable_win32_dll=no # Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then enableval=$enable_libtool_lock; fi test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Check whether --with-pic was given. if test "${with_pic+set}" = set; then withval=$with_pic; pic_mode="$withval" else pic_mode=default fi test -z "$pic_mode" && pic_mode=default # Use C for the default configuration in the libtool script tagname= lt_save_CC="$CC" ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o objext=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $rm conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $rm -r conftest* lt_prog_compiler_no_builtin_flag= if test "$GCC" = yes; then lt_prog_compiler_no_builtin_flag=' -fno-builtin' { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_rtti_exceptions=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-fno-rtti -fno-exceptions" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:7461: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:7465: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes fi fi $rm conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" else : fi fi lt_prog_compiler_wl= lt_prog_compiler_pic= lt_prog_compiler_static= { echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } if test "$GCC" = yes; then lt_prog_compiler_wl='-Wl,' lt_prog_compiler_static='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' fi ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic='-fno-common' ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. lt_prog_compiler_can_build_shared=no enable_shared=no ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic=-Kconform_pic fi ;; hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic='-fPIC' ;; esac ;; *) lt_prog_compiler_pic='-fPIC' ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) lt_prog_compiler_wl='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' else lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' fi ;; darwin*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files case $cc_basename in xlc*) lt_prog_compiler_pic='-qnocommon' lt_prog_compiler_wl='-Wl,' ;; esac ;; mingw* | cygwin* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic='-DDLL_EXPORT' ;; hpux9* | hpux10* | hpux11*) lt_prog_compiler_wl='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? lt_prog_compiler_static='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) lt_prog_compiler_wl='-Wl,' # PIC (with -KPIC) is the default. lt_prog_compiler_static='-non_shared' ;; newsos6) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; linux* | k*bsd*-gnu) case $cc_basename in icc* | ecc*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-static' ;; pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' ;; ccc*) lt_prog_compiler_wl='-Wl,' # All Alpha code is PIC. lt_prog_compiler_static='-non_shared' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Wl,' ;; *Sun\ F*) # Sun Fortran 8.3 passes all unrecognized flags to the linker lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='' ;; esac ;; esac ;; osf3* | osf4* | osf5*) lt_prog_compiler_wl='-Wl,' # All OSF/1 code is PIC. lt_prog_compiler_static='-non_shared' ;; rdos*) lt_prog_compiler_static='-non_shared' ;; solaris*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' case $cc_basename in f77* | f90* | f95*) lt_prog_compiler_wl='-Qoption ld ';; *) lt_prog_compiler_wl='-Wl,';; esac ;; sunos4*) lt_prog_compiler_wl='-Qoption ld ' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then lt_prog_compiler_pic='-Kconform_pic' lt_prog_compiler_static='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; unicos*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_can_build_shared=no ;; uts4*) lt_prog_compiler_pic='-pic' lt_prog_compiler_static='-Bstatic' ;; *) lt_prog_compiler_can_build_shared=no ;; esac fi { echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic"; then { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_pic_works+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_pic_works=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic -DPIC" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:7751: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:7755: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works=yes fi fi $rm conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; } if test x"$lt_cv_prog_compiler_pic_works" = xyes; then case $lt_prog_compiler_pic in "" | " "*) ;; *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; esac else lt_prog_compiler_pic= lt_prog_compiler_can_build_shared=no fi fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic= ;; *) lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ;; esac # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" { echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_static_works+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_static_works=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works=yes fi else lt_cv_prog_compiler_static_works=yes fi fi $rm -r conftest* LDFLAGS="$save_LDFLAGS" fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; } if test x"$lt_cv_prog_compiler_static_works" = xyes; then : else lt_prog_compiler_static= fi { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_c_o+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_c_o=no $rm -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:7855: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:7859: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files $rm out/* && rmdir out cd .. rmdir conftest $rm conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } hard_links=yes $rm conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { echo "$as_me:$LINENO: result: $hard_links" >&5 echo "${ECHO_T}$hard_links" >&6; } if test "$hard_links" = no; then { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } runpath_var= allow_undefined_flag= enable_shared_with_static_runtimes=no archive_cmds= archive_expsym_cmds= old_archive_From_new_cmds= old_archive_from_expsyms_cmds= export_dynamic_flag_spec= whole_archive_flag_spec= thread_safe_flag_spec= hardcode_libdir_flag_spec= hardcode_libdir_flag_spec_ld= hardcode_libdir_separator= hardcode_direct=no hardcode_minus_L=no hardcode_shlibpath_var=unsupported link_all_deplibs=unknown hardcode_automatic=no module_cmds= module_expsym_cmds= always_export_symbols=no export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. extract_expsyms_cmds= # Just being paranoid about ensuring that cc_basename is set. for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` case $host_os in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; esac ld_shlibs=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec= fi supports_anon_versioning=no case `$LD -v 2>/dev/null` in *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs=no cat <&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. EOF fi ;; amigaos*) archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we can't use # them. ld_shlibs=no ;; beos*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs=no fi ;; cygwin* | mingw* | pw32*) # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs=no fi ;; interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | k*bsd*-gnu) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then tmp_addflag= case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; *) tmp_sharedflag='-shared' ;; esac archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test $supports_anon_versioning = yes; then archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ $echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi link_all_deplibs=no else ld_shlibs=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ld_shlibs=no cat <&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. EOF elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' else ld_shlibs=no fi ;; esac ;; sunos4*) archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct=yes hardcode_shlibpath_var=no ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = no; then runpath_var= hardcode_libdir_flag_spec= export_dynamic_flag_spec= whole_archive_flag_spec= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag=unsupported always_export_symbols=yes archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | grep 'GNU' > /dev/null; then export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds='' hardcode_direct=yes hardcode_libdir_separator=':' link_all_deplibs=yes if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag=' ${wl}-bernotok' allow_undefined_flag=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec='$convenience' archive_cmds_need_lc=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # see comment about different semantics on the GNU ld section ld_shlibs=no ;; bsdi[45]*) export_dynamic_flag_spec=-rdynamic ;; cygwin* | mingw* | pw32*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_From_new_cmds='true' # FIXME: Should let the user specify the lib program. old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' fix_srcfile_path='`cygpath -w "$srcfile"`' enable_shared_with_static_runtimes=yes ;; darwin* | rhapsody*) case $host_os in rhapsody* | darwin1.[012]) allow_undefined_flag='${wl}-undefined ${wl}suppress' ;; *) # Darwin 1.3 on if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' else case ${MACOSX_DEPLOYMENT_TARGET} in 10.[012]) allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup' ;; esac fi ;; esac archive_cmds_need_lc=no hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported whole_archive_flag_spec='' link_all_deplibs=yes if test "$GCC" = yes ; then output_verbose_link_cmd='echo' archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" else case $cc_basename in xlc*) output_verbose_link_cmd='echo' archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ;; *) ld_shlibs=no ;; esac fi ;; dgux*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; freebsd1*) ld_shlibs=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; hpux9*) if test "$GCC" = yes; then archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes export_dynamic_flag_spec='${wl}-E' ;; hpux10*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes fi ;; hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: case $host_cpu in hppa*64*|ia64*) hardcode_libdir_flag_spec_ld='+b $libdir' hardcode_direct=no hardcode_shlibpath_var=no ;; *) hardcode_direct=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_ld='-rpath $libdir' fi hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: link_all_deplibs=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes hardcode_shlibpath_var=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' else case $host_os in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-R$libdir' ;; *) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac fi else ld_shlibs=no fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' fi hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi hardcode_libdir_separator=: ;; solaris*) no_undefined_flag=' -z text' if test "$GCC" = yes; then wlarc='${wl}' archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else wlarc='' archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' fi hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else whole_archive_flag_spec='-z allextract$convenience -z defaultextract' fi ;; esac link_all_deplibs=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; sysv4) case $host_vendor in sni) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' reload_cmds='$CC -r -o $output$reload_objs' hardcode_direct=no ;; motorola) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; sysv4.3*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no export_dynamic_flag_spec='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag='${wl}-z,text' archive_cmds_need_lc=no hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag='${wl}-z,text' allow_undefined_flag='${wl}-z,nodefs' archive_cmds_need_lc=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' hardcode_libdir_separator=':' link_all_deplibs=yes export_dynamic_flag_spec='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; *) ld_shlibs=no ;; esac fi { echo "$as_me:$LINENO: result: $ld_shlibs" >&5 echo "${ECHO_T}$ld_shlibs" >&6; } test "$ld_shlibs" = no && can_build_shared=no # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc" in x|xyes) # Assume -lc should be added archive_cmds_need_lc=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } $rm conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl pic_flag=$lt_prog_compiler_pic compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag allow_undefined_flag= if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } then archive_cmds_need_lc=no else archive_cmds_need_lc=yes fi allow_undefined_flag=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $rm conftest* { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 echo "${ECHO_T}$archive_cmds_need_lc" >&6; } ;; esac fi ;; esac { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'` else lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[lt_foo]++; } if (lt_freq[lt_foo] == 1) { print lt_foo; } }'` sys_lib_search_path_spec=`echo $lt_search_path_spec` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin* | yes,mingw* | yes,pw32*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH printed by # mingw gcc, but we are running on Cygwin. Gcc prints its search # path with ; separators, and with drive letters. We can handle the # drive letters (cygwin fileutils understands them), so leave them, # especially as we might pass files found there to a mingw objdump, # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac ;; *) library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[123]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; interix[3-9]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; nto-qnx*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no export_dynamic_flag_spec='${wl}-Blargedynsym' runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' shlibpath_overrides_runpath=no else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' shlibpath_overrides_runpath=yes case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { echo "$as_me:$LINENO: result: $dynamic_linker" >&5 echo "${ECHO_T}$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" fi sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" fi sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } hardcode_action= if test -n "$hardcode_libdir_flag_spec" || \ test -n "$runpath_var" || \ test "X$hardcode_automatic" = "Xyes" ; then # We can hardcode non-existant directories. if test "$hardcode_direct" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no && test "$hardcode_minus_L" != no; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action=unsupported fi { echo "$as_me:$LINENO: result: $hardcode_action" >&5 echo "${ECHO_T}$hardcode_action" >&6; } if test "$hardcode_action" = relink; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi striplib= old_striplib= { echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" { echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6; } else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" { echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi ;; *) { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } ;; esac fi if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } if test "${ac_cv_lib_dl_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then ac_cv_lib_dl_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } if test $ac_cv_lib_dl_dlopen = yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes fi ;; *) { echo "$as_me:$LINENO: checking for shl_load" >&5 echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } if test "${ac_cv_func_shl_load+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define shl_load to an innocuous variant, in case declares shl_load. For example, HP-UX 11i declares gettimeofday. */ #define shl_load innocuous_shl_load /* System header to define __stub macros and hopefully few prototypes, which can conflict with char shl_load (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef shl_load /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char shl_load (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_shl_load || defined __stub___shl_load choke me #endif int main () { return shl_load (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then ac_cv_func_shl_load=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_func_shl_load=no fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } if test $ac_cv_func_shl_load = yes; then lt_cv_dlopen="shl_load" else { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } if test "${ac_cv_lib_dld_shl_load+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char shl_load (); int main () { return shl_load (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then ac_cv_lib_dld_shl_load=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_dld_shl_load=no fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } if test $ac_cv_lib_dld_shl_load = yes; then lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" else { echo "$as_me:$LINENO: checking for dlopen" >&5 echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } if test "${ac_cv_func_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define dlopen to an innocuous variant, in case declares dlopen. For example, HP-UX 11i declares gettimeofday. */ #define dlopen innocuous_dlopen /* System header to define __stub macros and hopefully few prototypes, which can conflict with char dlopen (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef dlopen /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_dlopen || defined __stub___dlopen choke me #endif int main () { return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then ac_cv_func_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_func_dlopen=no fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } if test $ac_cv_func_dlopen = yes; then lt_cv_dlopen="dlopen" else { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } if test "${ac_cv_lib_dl_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then ac_cv_lib_dl_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } if test $ac_cv_lib_dl_dlopen = yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } if test "${ac_cv_lib_svld_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then ac_cv_lib_svld_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_svld_dlopen=no fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } if test $ac_cv_lib_svld_dlopen = yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } if test "${ac_cv_lib_dld_dld_link+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dld_link (); int main () { return dld_link (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then ac_cv_lib_dld_dld_link=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_dld_dld_link=no fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } if test $ac_cv_lib_dld_dld_link = yes; then lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" fi fi fi fi fi fi ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } if test "${lt_cv_dlopen_self+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif #ifdef __cplusplus extern "C" void exit (int); #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else puts (dlerror ()); exit (status); } EOF if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; esac else : # compilation failed lt_cv_dlopen_self=no fi fi rm -fr conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } if test "${lt_cv_dlopen_self_static+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif #ifdef __cplusplus extern "C" void exit (int); #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else puts (dlerror ()); exit (status); } EOF if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; esac else : # compilation failed lt_cv_dlopen_self_static=no fi fi rm -fr conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi # Report which library types will actually be built { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } { echo "$as_me:$LINENO: result: $can_build_shared" >&5 echo "${ECHO_T}$can_build_shared" >&6; } { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[4-9]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac { echo "$as_me:$LINENO: result: $enable_shared" >&5 echo "${ECHO_T}$enable_shared" >&6; } { echo "$as_me:$LINENO: checking whether to build static libraries" >&5 echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes { echo "$as_me:$LINENO: result: $enable_static" >&5 echo "${ECHO_T}$enable_static" >&6; } # The else clause should only fire when bootstrapping the # libtool distribution, otherwise you forgot to ship ltmain.sh # with your package, and you will get complaints that there are # no rules to generate ltmain.sh. if test -f "$ltmain"; then # See if we are running on zsh, and set the options which allow our commands through # without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ deplibs_check_method reload_flag reload_cmds need_locks \ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ old_postinstall_cmds old_postuninstall_cmds \ compiler \ CC \ LD \ lt_prog_compiler_wl \ lt_prog_compiler_pic \ lt_prog_compiler_static \ lt_prog_compiler_no_builtin_flag \ export_dynamic_flag_spec \ thread_safe_flag_spec \ whole_archive_flag_spec \ enable_shared_with_static_runtimes \ old_archive_cmds \ old_archive_from_new_cmds \ predep_objects \ postdep_objects \ predeps \ postdeps \ compiler_lib_search_path \ compiler_lib_search_dirs \ archive_cmds \ archive_expsym_cmds \ postinstall_cmds \ postuninstall_cmds \ old_archive_from_expsyms_cmds \ allow_undefined_flag \ no_undefined_flag \ export_symbols_cmds \ hardcode_libdir_flag_spec \ hardcode_libdir_flag_spec_ld \ hardcode_libdir_separator \ hardcode_automatic \ module_cmds \ module_expsym_cmds \ lt_cv_prog_compiler_c_o \ fix_srcfile_path \ exclude_expsyms \ include_expsyms; do case $var in old_archive_cmds | \ old_archive_from_new_cmds | \ archive_cmds | \ archive_expsym_cmds | \ module_cmds | \ module_expsym_cmds | \ old_archive_from_expsyms_cmds | \ export_symbols_cmds | \ extract_expsyms_cmds | reload_cmds | finish_cmds | \ postinstall_cmds | postuninstall_cmds | \ old_postinstall_cmds | old_postuninstall_cmds | \ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) # Double-quote double-evaled strings. eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ;; *) eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ;; esac done case $lt_echo in *'\$0 --fallback-echo"') lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ;; esac cfgfile="${ofile}T" trap "$rm \"$cfgfile\"; exit 1" 1 2 15 $rm -f "$cfgfile" { echo "$as_me:$LINENO: creating $ofile" >&5 echo "$as_me: creating $ofile" >&6;} cat <<__EOF__ >> "$cfgfile" #! $SHELL # `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 # Free Software Foundation, Inc. # # This file is part of GNU Libtool: # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # A sed program that does not truncate output. SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="$SED -e 1s/^X//" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # The names of the tagged configurations supported by this script. available_tags= # ### BEGIN LIBTOOL CONFIG # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc # Whether or not to disallow shared libs when runtime libs are static allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # A C compiler. LTCC=$lt_LTCC # LTCC compiler flags. LTCFLAGS=$lt_LTCFLAGS # A language-specific compiler. CC=$lt_compiler # Is the compiler the GNU C compiler? with_gcc=$GCC # An ERE matcher. EGREP=$lt_EGREP # The linker used to build libraries. LD=$lt_LD # Whether we need hard or soft links. LN_S=$lt_LN_S # A BSD-compatible nm program. NM=$lt_NM # A symbol stripping program STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD # Used on cygwin: DLL creation program. DLLTOOL="$DLLTOOL" # Used on cygwin: object dumper. OBJDUMP="$OBJDUMP" # Used on cygwin: assembler. AS="$AS" # The name of the directory that contains temporary libtool files. objdir=$objdir # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl # Object file suffix (normally "o"). objext="$ac_objext" # Old archive suffix (normally "a"). libext="$libext" # Shared library suffix (normally ".so"). shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic pic_mode=$pic_mode # What is the maximum length of a command? max_cmd_len=$lt_cv_sys_max_cmd_len # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o # Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec # Compiler flag to generate thread-safe objects. thread_safe_flag_spec=$lt_thread_safe_flag_spec # Library versioning type. version_type=$version_type # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Commands used to build and install an old-style archive. RANLIB=$lt_RANLIB old_archive_cmds=$lt_old_archive_cmds old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds # Commands used to build and install a shared archive. archive_cmds=$lt_archive_cmds archive_expsym_cmds=$lt_archive_expsym_cmds postinstall_cmds=$lt_postinstall_cmds postuninstall_cmds=$lt_postuninstall_cmds # Commands used to build a loadable module (assumed same as above if empty) module_cmds=$lt_module_cmds module_expsym_cmds=$lt_module_expsym_cmds # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # Dependencies to place before the objects being linked to create a # shared library. predep_objects=$lt_predep_objects # Dependencies to place after the objects being linked to create a # shared library. postdep_objects=$lt_postdep_objects # Dependencies to place before the objects being linked to create a # shared library. predeps=$lt_predeps # Dependencies to place after the objects being linked to create a # shared library. postdeps=$lt_postdeps # The directories searched by this compiler when creating a shared # library compiler_lib_search_dirs=$lt_compiler_lib_search_dirs # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_compiler_lib_search_path # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == file_magic. file_magic_cmd=$lt_file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag # Flag that forces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # Same as above, but a single script fragment to be evaled but not shown. finish_eval=$lt_finish_eval # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. runpath_var=$runpath_var # This is the shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator # Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the # resulting binary. hardcode_direct=$hardcode_direct # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=$hardcode_minus_L # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var # Set to yes if building a shared library automatically hardcodes DIR into the library # and all subsequent libraries and executables linked against it. hardcode_automatic=$hardcode_automatic # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path=$lt_fix_srcfile_path # Set to yes if exported symbols are required. always_export_symbols=$always_export_symbols # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms # Symbols that must always be exported. include_expsyms=$lt_include_expsyms # ### END LIBTOOL CONFIG __EOF__ case $host_os in aix3*) cat <<\EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi EOF ;; esac # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) mv -f "$cfgfile" "$ofile" || \ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" else # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` if test -f "$ltmain_in"; then test -f Makefile && make "$ltmain" fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC="$lt_save_CC" # Check whether --with-tags was given. if test "${with_tags+set}" = set; then withval=$with_tags; tagnames="$withval" fi if test -f "$ltmain" && test -n "$tagnames"; then if test ! -f "${ofile}"; then { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5 echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;} fi if test -z "$LTCC"; then eval "`$SHELL ${ofile} --config | grep '^LTCC='`" if test -z "$LTCC"; then { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5 echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;} else { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5 echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} fi fi if test -z "$LTCFLAGS"; then eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" fi # Extract list of available tagged configurations in $ofile. # Note that this assumes the entire list is on one line. available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for tagname in $tagnames; do IFS="$lt_save_ifs" # Check whether tagname contains only valid characters case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in "") ;; *) { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5 echo "$as_me: error: invalid tag name: $tagname" >&2;} { (exit 1); exit 1; }; } ;; esac if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null then { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5 echo "$as_me: error: tag name \"$tagname\" already exists" >&2;} { (exit 1); exit 1; }; } fi # Update the list of available tags. if test -n "$tagname"; then echo appending configuration tag \"$tagname\" to $ofile case $tagname in CXX) if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu archive_cmds_need_lc_CXX=no allow_undefined_flag_CXX= always_export_symbols_CXX=no archive_expsym_cmds_CXX= export_dynamic_flag_spec_CXX= hardcode_direct_CXX=no hardcode_libdir_flag_spec_CXX= hardcode_libdir_flag_spec_ld_CXX= hardcode_libdir_separator_CXX= hardcode_minus_L_CXX=no hardcode_shlibpath_var_CXX=unsupported hardcode_automatic_CXX=no module_cmds_CXX= module_expsym_cmds_CXX= link_all_deplibs_CXX=unknown old_archive_cmds_CXX=$old_archive_cmds no_undefined_flag_CXX= whole_archive_flag_spec_CXX= enable_shared_with_static_runtimes_CXX=no # Dependencies to place before and after the object being linked: predep_objects_CXX= postdep_objects_CXX= predeps_CXX= postdeps_CXX= compiler_lib_search_path_CXX= compiler_lib_search_dirs_CXX= # Source file extension for C++ test sources. ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o objext_CXX=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $rm conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $rm -r conftest* # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} compiler=$CC compiler_CXX=$CC for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` # We don't want -fno-exception wen compiling C++ code, so set the # no_builtin_flag separately if test "$GXX" = yes; then lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' else lt_prog_compiler_no_builtin_flag_CXX= fi if test "$GXX" = yes; then # Set up default GNU C++ configuration # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { echo "$as_me:$LINENO: checking for GNU ld" >&5 echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } else { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } fi if test "${lt_cv_path_LD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 echo "${ECHO_T}$LD" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} { (exit 1); exit 1; }; } { echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } if test "${lt_cv_prog_gnu_ld+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ grep 'no-whole-archive' > /dev/null; then whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec_CXX= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } ld_shlibs_CXX=yes case $host_os in aix3*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds_CXX='' hardcode_direct_CXX=yes hardcode_libdir_separator_CXX=':' link_all_deplibs_CXX=yes if test "$GXX" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct_CXX=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L_CXX=yes hardcode_libdir_flag_spec_CXX='-L$libdir' hardcode_libdir_separator_CXX= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols_CXX=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag_CXX='-berok' # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag_CXX="-z nodefs" archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag_CXX=' ${wl}-bernotok' allow_undefined_flag_CXX=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec_CXX='$convenience' archive_cmds_need_lc_CXX=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; beos*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then allow_undefined_flag_CXX=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs_CXX=no fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; cygwin* | mingw* | pw32*) # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec_CXX='-L$libdir' allow_undefined_flag_CXX=unsupported always_export_symbols_CXX=no enable_shared_with_static_runtimes_CXX=yes if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs_CXX=no fi ;; darwin* | rhapsody*) archive_cmds_need_lc_CXX=no hardcode_direct_CXX=no hardcode_automatic_CXX=yes hardcode_shlibpath_var_CXX=unsupported whole_archive_flag_spec_CXX='' link_all_deplibs_CXX=yes allow_undefined_flag_CXX="$_lt_dar_allow_undefined" if test "$GXX" = yes ; then output_verbose_link_cmd='echo' archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" if test "$lt_cv_apple_cc_single_mod" != "yes"; then archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" fi else case $cc_basename in xlc*) output_verbose_link_cmd='echo' archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ;; *) ld_shlibs_CXX=no ;; esac fi ;; dgux*) case $cc_basename in ec++*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; freebsd[12]*) # C++ shared libraries reported to be fairly broken before switch to ELF ld_shlibs_CXX=no ;; freebsd-elf*) archive_cmds_need_lc_CXX=no ;; freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions ld_shlibs_CXX=yes ;; gnu*) ;; hpux9*) hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' hardcode_libdir_separator_CXX=: export_dynamic_flag_spec_CXX='${wl}-E' hardcode_direct_CXX=yes hardcode_minus_L_CXX=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aCC*) archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes; then archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' hardcode_libdir_separator_CXX=: case $host_cpu in hppa*64*|ia64*) ;; *) export_dynamic_flag_spec_CXX='${wl}-E' ;; esac fi case $host_cpu in hppa*64*|ia64*) hardcode_direct_CXX=no hardcode_shlibpath_var_CXX=no ;; *) hardcode_direct_CXX=yes hardcode_minus_L_CXX=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aCC*) case $host_cpu in hppa*64*) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then case $host_cpu in hppa*64*) archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; interix[3-9]*) hardcode_direct_CXX=no hardcode_shlibpath_var_CXX=no hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' fi fi link_all_deplibs_CXX=yes ;; esac hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: ;; linux* | k*bsd*-gnu) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc*) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; esac archive_cmds_need_lc_CXX=no hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec_CXX='-rpath $libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 no_undefined_flag_CXX=' -zdefs' archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' hardcode_libdir_flag_spec_CXX='-R$libdir' whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ;; esac ;; esac ;; lynxos*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; m88k*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; mvs*) case $cc_basename in cxx*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= hardcode_libdir_flag_spec_CXX='-R$libdir' hardcode_direct_CXX=yes hardcode_shlibpath_var_CXX=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; openbsd2*) # C++ shared libraries are fairly broken ld_shlibs_CXX=no ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct_CXX=yes hardcode_shlibpath_var_CXX=no archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' export_dynamic_flag_spec_CXX='${wl}-E' whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi output_verbose_link_cmd='echo' else ld_shlibs_CXX=no fi ;; osf3*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' hardcode_libdir_separator_CXX=: # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; cxx*) allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; osf4* | osf5*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' hardcode_libdir_separator_CXX=: # Archives containing C++ object files must be created using # the KAI C++ compiler. old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; cxx*) allow_undefined_flag_CXX=' -expect_unresolved \*' archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ $rm $lib.exp' hardcode_libdir_flag_spec_CXX='-rpath $libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; lcc*) # Lucid # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; solaris*) case $cc_basename in CC*) # Sun C++ 4.2, 5.x and Centerline C++ archive_cmds_need_lc_CXX=yes no_undefined_flag_CXX=' -zdefs' archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' hardcode_libdir_flag_spec_CXX='-R$libdir' hardcode_shlibpath_var_CXX=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' ;; esac link_all_deplibs_CXX=yes output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ;; gcx*) # Green Hills C++ Compiler archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$GXX" = yes && test "$with_gnu_ld" = no; then no_undefined_flag_CXX=' ${wl}-z ${wl}defs' if $CC --version | grep -v '^2\.7' > /dev/null; then archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" fi hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac fi ;; esac ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag_CXX='${wl}-z,text' archive_cmds_need_lc_CXX=no hardcode_shlibpath_var_CXX=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. # So that behaviour is only enabled if SCOABSPATH is set to a # non-empty value in the environment. Most likely only useful for # creating official distributions of packages. # This is a hack until libtool officially supports absolute path # names for shared libraries. no_undefined_flag_CXX='${wl}-z,text' allow_undefined_flag_CXX='${wl}-z,nodefs' archive_cmds_need_lc_CXX=no hardcode_shlibpath_var_CXX=no hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' hardcode_libdir_separator_CXX=':' link_all_deplibs_CXX=yes export_dynamic_flag_spec_CXX='${wl}-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac { echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 echo "${ECHO_T}$ld_shlibs_CXX" >&6; } test "$ld_shlibs_CXX" = no && can_build_shared=no GCC_CXX="$GXX" LD_CXX="$LD" cat > conftest.$ac_ext <&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Parse the compiler output and extract the necessary # objects, libraries and library flags. # Sentinel used to keep track of whether or not we are before # the conftest object file. pre_test_object_deps_done=no # The `*' in the case matches for architectures that use `case' in # $output_verbose_cmd can trigger glob expansion during the loop # eval without this substitution. output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` for p in `eval $output_verbose_link_cmd`; do case $p in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. if test $p = "-L" \ || test $p = "-R"; then prev=$p continue else prev= fi if test "$pre_test_object_deps_done" = no; then case $p in -L* | -R*) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$compiler_lib_search_path_CXX"; then compiler_lib_search_path_CXX="${prev}${p}" else compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" fi ;; # The "-l" case would never come before the object being # linked, so don't bother handling this case. esac else if test -z "$postdeps_CXX"; then postdeps_CXX="${prev}${p}" else postdeps_CXX="${postdeps_CXX} ${prev}${p}" fi fi ;; *.$objext) # This assumes that the test object file only shows up # once in the compiler output. if test "$p" = "conftest.$objext"; then pre_test_object_deps_done=yes continue fi if test "$pre_test_object_deps_done" = no; then if test -z "$predep_objects_CXX"; then predep_objects_CXX="$p" else predep_objects_CXX="$predep_objects_CXX $p" fi else if test -z "$postdep_objects_CXX"; then postdep_objects_CXX="$p" else postdep_objects_CXX="$postdep_objects_CXX $p" fi fi ;; *) ;; # Ignore the rest. esac done # Clean up. rm -f a.out a.exe else echo "libtool.m4: error: problem compiling CXX test program" fi $rm -f confest.$objext compiler_lib_search_dirs_CXX= if test -n "$compiler_lib_search_path_CXX"; then compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` fi # PORTME: override above test on systems where it is broken case $host_os in interix[3-9]*) # Interix 3.5 installs completely hosed .la files for C++, so rather than # hack all around it, let's just trust "g++" to DTRT. predep_objects_CXX= postdep_objects_CXX= postdeps_CXX= ;; linux*) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 # # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac if test "$solaris_use_stlport4" != yes; then postdeps_CXX='-library=Cstd -library=Crun' fi ;; esac ;; solaris*) case $cc_basename in CC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac # Adding this requires a known-good setup of shared libraries for # Sun compiler versions before 5.6, else PIC objects from an old # archive will be linked into the output, leading to subtle bugs. if test "$solaris_use_stlport4" != yes; then postdeps_CXX='-library=Cstd -library=Crun' fi ;; esac ;; esac case " $postdeps_CXX " in *" -lc "*) archive_cmds_need_lc_CXX=no ;; esac lt_prog_compiler_wl_CXX= lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX= { echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_CXX='-Bstatic' fi ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | os2* | pw32*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic_CXX='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic_CXX='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all lt_prog_compiler_pic_CXX= ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic_CXX=-Kconform_pic fi ;; hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) ;; *) lt_prog_compiler_pic_CXX='-fPIC' ;; esac ;; *) lt_prog_compiler_pic_CXX='-fPIC' ;; esac else case $host_os in aix[4-9]*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_CXX='-Bstatic' else lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; darwin*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files case $cc_basename in xlc*) lt_prog_compiler_pic_CXX='-qnocommon' lt_prog_compiler_wl_CXX='-Wl,' ;; esac ;; dgux*) case $cc_basename in ec++*) lt_prog_compiler_pic_CXX='-KPIC' ;; ghcx*) # Green Hills C++ Compiler lt_prog_compiler_pic_CXX='-pic' ;; *) ;; esac ;; freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then lt_prog_compiler_pic_CXX='+Z' fi ;; aCC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic_CXX='+Z' ;; esac ;; *) ;; esac ;; interix*) # This is c89, which is MS Visual C++ (no shared libs) # Anyone wants to do a port? ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux* | k*bsd*-gnu) case $cc_basename in KCC*) # KAI C++ Compiler lt_prog_compiler_wl_CXX='--backend -Wl,' lt_prog_compiler_pic_CXX='-fPIC' ;; icpc* | ecpc*) # Intel C++ lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-static' ;; pgCC* | pgcpp*) # Portland Group C++ compiler. lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-fpic' lt_prog_compiler_static_CXX='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX='-non_shared' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' lt_prog_compiler_wl_CXX='-Qoption ld ' ;; esac ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx*) lt_prog_compiler_pic_CXX='-W c,exportall' ;; *) ;; esac ;; netbsd* | netbsdelf*-gnu) ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) lt_prog_compiler_wl_CXX='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 lt_prog_compiler_pic_CXX='-pic' ;; cxx*) # Digital/Compaq C++ lt_prog_compiler_wl_CXX='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX='-non_shared' ;; *) ;; esac ;; psos*) ;; solaris*) case $cc_basename in CC*) # Sun C++ 4.2, 5.x and Centerline C++ lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' lt_prog_compiler_wl_CXX='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler lt_prog_compiler_pic_CXX='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x lt_prog_compiler_pic_CXX='-pic' lt_prog_compiler_static_CXX='-Bstatic' ;; lcc*) # Lucid lt_prog_compiler_pic_CXX='-pic' ;; *) ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 lt_prog_compiler_pic_CXX='-KPIC' ;; *) ;; esac ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' ;; esac ;; vxworks*) ;; *) lt_prog_compiler_can_build_shared_CXX=no ;; esac fi { echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6; } # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic_CXX"; then { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_pic_works_CXX=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:12733: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:12737: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works_CXX=yes fi fi $rm conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_CXX" >&6; } if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then case $lt_prog_compiler_pic_CXX in "" | " "*) ;; *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; esac else lt_prog_compiler_pic_CXX= lt_prog_compiler_can_build_shared_CXX=no fi fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_CXX= ;; *) lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" ;; esac # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" { echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_static_works_CXX=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works_CXX=yes fi else lt_cv_prog_compiler_static_works_CXX=yes fi fi $rm -r conftest* LDFLAGS="$save_LDFLAGS" fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_static_works_CXX" >&6; } if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then : else lt_prog_compiler_static_CXX= fi { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_c_o_CXX=no $rm -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:12837: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:12841: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_CXX=yes fi fi chmod u+w . 2>&5 $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files $rm out/* && rmdir out cd .. rmdir conftest $rm conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } hard_links=yes $rm conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { echo "$as_me:$LINENO: result: $hard_links" >&5 echo "${ECHO_T}$hard_links" >&6; } if test "$hard_links" = no; then { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' case $host_os in aix[4-9]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | grep 'GNU' > /dev/null; then export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) export_symbols_cmds_CXX="$ltdll_cmds" ;; cygwin* | mingw*) export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ;; linux* | k*bsd*-gnu) link_all_deplibs_CXX=no ;; *) export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' { echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 echo "${ECHO_T}$ld_shlibs_CXX" >&6; } test "$ld_shlibs_CXX" = no && can_build_shared=no # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc_CXX" in x|xyes) # Assume -lc should be added archive_cmds_need_lc_CXX=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds_CXX in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } $rm conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl_CXX pic_flag=$lt_prog_compiler_pic_CXX compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag_CXX allow_undefined_flag_CXX= if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } then archive_cmds_need_lc_CXX=no else archive_cmds_need_lc_CXX=yes fi allow_undefined_flag_CXX=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $rm conftest* { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; } ;; esac fi ;; esac { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin* | yes,mingw* | yes,pw32*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH printed by # mingw gcc, but we are running on Cygwin. Gcc prints its search # path with ; separators, and with drive letters. We can handle the # drive letters (cygwin fileutils understands them), so leave them, # especially as we might pass files found there to a mingw objdump, # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac ;; *) library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[123]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; interix[3-9]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; nto-qnx*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no export_dynamic_flag_spec='${wl}-Blargedynsym' runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' shlibpath_overrides_runpath=no else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' shlibpath_overrides_runpath=yes case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { echo "$as_me:$LINENO: result: $dynamic_linker" >&5 echo "${ECHO_T}$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" fi sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" fi sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } hardcode_action_CXX= if test -n "$hardcode_libdir_flag_spec_CXX" || \ test -n "$runpath_var_CXX" || \ test "X$hardcode_automatic_CXX" = "Xyes" ; then # We can hardcode non-existant directories. if test "$hardcode_direct_CXX" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no && test "$hardcode_minus_L_CXX" != no; then # Linking always hardcodes the temporary library directory. hardcode_action_CXX=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action_CXX=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action_CXX=unsupported fi { echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 echo "${ECHO_T}$hardcode_action_CXX" >&6; } if test "$hardcode_action_CXX" = relink; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi # The else clause should only fire when bootstrapping the # libtool distribution, otherwise you forgot to ship ltmain.sh # with your package, and you will get complaints that there are # no rules to generate ltmain.sh. if test -f "$ltmain"; then # See if we are running on zsh, and set the options which allow our commands through # without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ deplibs_check_method reload_flag reload_cmds need_locks \ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ old_postinstall_cmds old_postuninstall_cmds \ compiler_CXX \ CC_CXX \ LD_CXX \ lt_prog_compiler_wl_CXX \ lt_prog_compiler_pic_CXX \ lt_prog_compiler_static_CXX \ lt_prog_compiler_no_builtin_flag_CXX \ export_dynamic_flag_spec_CXX \ thread_safe_flag_spec_CXX \ whole_archive_flag_spec_CXX \ enable_shared_with_static_runtimes_CXX \ old_archive_cmds_CXX \ old_archive_from_new_cmds_CXX \ predep_objects_CXX \ postdep_objects_CXX \ predeps_CXX \ postdeps_CXX \ compiler_lib_search_path_CXX \ compiler_lib_search_dirs_CXX \ archive_cmds_CXX \ archive_expsym_cmds_CXX \ postinstall_cmds_CXX \ postuninstall_cmds_CXX \ old_archive_from_expsyms_cmds_CXX \ allow_undefined_flag_CXX \ no_undefined_flag_CXX \ export_symbols_cmds_CXX \ hardcode_libdir_flag_spec_CXX \ hardcode_libdir_flag_spec_ld_CXX \ hardcode_libdir_separator_CXX \ hardcode_automatic_CXX \ module_cmds_CXX \ module_expsym_cmds_CXX \ lt_cv_prog_compiler_c_o_CXX \ fix_srcfile_path_CXX \ exclude_expsyms_CXX \ include_expsyms_CXX; do case $var in old_archive_cmds_CXX | \ old_archive_from_new_cmds_CXX | \ archive_cmds_CXX | \ archive_expsym_cmds_CXX | \ module_cmds_CXX | \ module_expsym_cmds_CXX | \ old_archive_from_expsyms_cmds_CXX | \ export_symbols_cmds_CXX | \ extract_expsyms_cmds | reload_cmds | finish_cmds | \ postinstall_cmds | postuninstall_cmds | \ old_postinstall_cmds | old_postuninstall_cmds | \ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) # Double-quote double-evaled strings. eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ;; *) eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ;; esac done case $lt_echo in *'\$0 --fallback-echo"') lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ;; esac cfgfile="$ofile" cat <<__EOF__ >> "$cfgfile" # ### BEGIN LIBTOOL TAG CONFIG: $tagname # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc_CXX # Whether or not to disallow shared libs when runtime libs are static allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # A C compiler. LTCC=$lt_LTCC # LTCC compiler flags. LTCFLAGS=$lt_LTCFLAGS # A language-specific compiler. CC=$lt_compiler_CXX # Is the compiler the GNU C compiler? with_gcc=$GCC_CXX # An ERE matcher. EGREP=$lt_EGREP # The linker used to build libraries. LD=$lt_LD_CXX # Whether we need hard or soft links. LN_S=$lt_LN_S # A BSD-compatible nm program. NM=$lt_NM # A symbol stripping program STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD # Used on cygwin: DLL creation program. DLLTOOL="$DLLTOOL" # Used on cygwin: object dumper. OBJDUMP="$OBJDUMP" # Used on cygwin: assembler. AS="$AS" # The name of the directory that contains temporary libtool files. objdir=$objdir # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl_CXX # Object file suffix (normally "o"). objext="$ac_objext" # Old archive suffix (normally "a"). libext="$libext" # Shared library suffix (normally ".so"). shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic_CXX pic_mode=$pic_mode # What is the maximum length of a command? max_cmd_len=$lt_cv_sys_max_cmd_len # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX # Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static_CXX # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX # Compiler flag to generate thread-safe objects. thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX # Library versioning type. version_type=$version_type # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Commands used to build and install an old-style archive. RANLIB=$lt_RANLIB old_archive_cmds=$lt_old_archive_cmds_CXX old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX # Commands used to build and install a shared archive. archive_cmds=$lt_archive_cmds_CXX archive_expsym_cmds=$lt_archive_expsym_cmds_CXX postinstall_cmds=$lt_postinstall_cmds postuninstall_cmds=$lt_postuninstall_cmds # Commands used to build a loadable module (assumed same as above if empty) module_cmds=$lt_module_cmds_CXX module_expsym_cmds=$lt_module_expsym_cmds_CXX # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # Dependencies to place before the objects being linked to create a # shared library. predep_objects=$lt_predep_objects_CXX # Dependencies to place after the objects being linked to create a # shared library. postdep_objects=$lt_postdep_objects_CXX # Dependencies to place before the objects being linked to create a # shared library. predeps=$lt_predeps_CXX # Dependencies to place after the objects being linked to create a # shared library. postdeps=$lt_postdeps_CXX # The directories searched by this compiler when creating a shared # library compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_compiler_lib_search_path_CXX # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == file_magic. file_magic_cmd=$lt_file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag_CXX # Flag that forces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag_CXX # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # Same as above, but a single script fragment to be evaled but not shown. finish_eval=$lt_finish_eval # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. runpath_var=$runpath_var # This is the shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action_CXX # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX # Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the # resulting binary. hardcode_direct=$hardcode_direct_CXX # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=$hardcode_minus_L_CXX # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX # Set to yes if building a shared library automatically hardcodes DIR into the library # and all subsequent libraries and executables linked against it. hardcode_automatic=$hardcode_automatic_CXX # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs_CXX # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path=$lt_fix_srcfile_path # Set to yes if exported symbols are required. always_export_symbols=$always_export_symbols_CXX # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds_CXX # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms_CXX # Symbols that must always be exported. include_expsyms=$lt_include_expsyms_CXX # ### END LIBTOOL TAG CONFIG: $tagname __EOF__ else # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` if test -f "$ltmain_in"; then test -f Makefile && make "$ltmain" fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC=$lt_save_CC LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ldcxx=$with_gnu_ld with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld else tagname="" fi ;; F77) if test -n "$F77" && test "X$F77" != "Xno"; then ac_ext=f ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_f77_compiler_gnu archive_cmds_need_lc_F77=no allow_undefined_flag_F77= always_export_symbols_F77=no archive_expsym_cmds_F77= export_dynamic_flag_spec_F77= hardcode_direct_F77=no hardcode_libdir_flag_spec_F77= hardcode_libdir_flag_spec_ld_F77= hardcode_libdir_separator_F77= hardcode_minus_L_F77=no hardcode_automatic_F77=no module_cmds_F77= module_expsym_cmds_F77= link_all_deplibs_F77=unknown old_archive_cmds_F77=$old_archive_cmds no_undefined_flag_F77= whole_archive_flag_spec_F77= enable_shared_with_static_runtimes_F77=no # Source file extension for f77 test sources. ac_ext=f # Object file extension for compiled f77 test sources. objext=o objext_F77=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $rm conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $rm -r conftest* # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${F77-"f77"} compiler=$CC compiler_F77=$CC for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } { echo "$as_me:$LINENO: result: $can_build_shared" >&5 echo "${ECHO_T}$can_build_shared" >&6; } { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[4-9]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac { echo "$as_me:$LINENO: result: $enable_shared" >&5 echo "${ECHO_T}$enable_shared" >&6; } { echo "$as_me:$LINENO: checking whether to build static libraries" >&5 echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes { echo "$as_me:$LINENO: result: $enable_static" >&5 echo "${ECHO_T}$enable_static" >&6; } GCC_F77="$G77" LD_F77="$LD" lt_prog_compiler_wl_F77= lt_prog_compiler_pic_F77= lt_prog_compiler_static_F77= { echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } if test "$GCC" = yes; then lt_prog_compiler_wl_F77='-Wl,' lt_prog_compiler_static_F77='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_F77='-Bstatic' fi ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic_F77='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic_F77='-fno-common' ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. lt_prog_compiler_can_build_shared_F77=no enable_shared=no ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic_F77=-Kconform_pic fi ;; hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic_F77='-fPIC' ;; esac ;; *) lt_prog_compiler_pic_F77='-fPIC' ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) lt_prog_compiler_wl_F77='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_F77='-Bstatic' else lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp' fi ;; darwin*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files case $cc_basename in xlc*) lt_prog_compiler_pic_F77='-qnocommon' lt_prog_compiler_wl_F77='-Wl,' ;; esac ;; mingw* | cygwin* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic_F77='-DDLL_EXPORT' ;; hpux9* | hpux10* | hpux11*) lt_prog_compiler_wl_F77='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic_F77='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? lt_prog_compiler_static_F77='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) lt_prog_compiler_wl_F77='-Wl,' # PIC (with -KPIC) is the default. lt_prog_compiler_static_F77='-non_shared' ;; newsos6) lt_prog_compiler_pic_F77='-KPIC' lt_prog_compiler_static_F77='-Bstatic' ;; linux* | k*bsd*-gnu) case $cc_basename in icc* | ecc*) lt_prog_compiler_wl_F77='-Wl,' lt_prog_compiler_pic_F77='-KPIC' lt_prog_compiler_static_F77='-static' ;; pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl_F77='-Wl,' lt_prog_compiler_pic_F77='-fpic' lt_prog_compiler_static_F77='-Bstatic' ;; ccc*) lt_prog_compiler_wl_F77='-Wl,' # All Alpha code is PIC. lt_prog_compiler_static_F77='-non_shared' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic_F77='-KPIC' lt_prog_compiler_static_F77='-Bstatic' lt_prog_compiler_wl_F77='-Wl,' ;; *Sun\ F*) # Sun Fortran 8.3 passes all unrecognized flags to the linker lt_prog_compiler_pic_F77='-KPIC' lt_prog_compiler_static_F77='-Bstatic' lt_prog_compiler_wl_F77='' ;; esac ;; esac ;; osf3* | osf4* | osf5*) lt_prog_compiler_wl_F77='-Wl,' # All OSF/1 code is PIC. lt_prog_compiler_static_F77='-non_shared' ;; rdos*) lt_prog_compiler_static_F77='-non_shared' ;; solaris*) lt_prog_compiler_pic_F77='-KPIC' lt_prog_compiler_static_F77='-Bstatic' case $cc_basename in f77* | f90* | f95*) lt_prog_compiler_wl_F77='-Qoption ld ';; *) lt_prog_compiler_wl_F77='-Wl,';; esac ;; sunos4*) lt_prog_compiler_wl_F77='-Qoption ld ' lt_prog_compiler_pic_F77='-PIC' lt_prog_compiler_static_F77='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) lt_prog_compiler_wl_F77='-Wl,' lt_prog_compiler_pic_F77='-KPIC' lt_prog_compiler_static_F77='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then lt_prog_compiler_pic_F77='-Kconform_pic' lt_prog_compiler_static_F77='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) lt_prog_compiler_wl_F77='-Wl,' lt_prog_compiler_pic_F77='-KPIC' lt_prog_compiler_static_F77='-Bstatic' ;; unicos*) lt_prog_compiler_wl_F77='-Wl,' lt_prog_compiler_can_build_shared_F77=no ;; uts4*) lt_prog_compiler_pic_F77='-pic' lt_prog_compiler_static_F77='-Bstatic' ;; *) lt_prog_compiler_can_build_shared_F77=no ;; esac fi { echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6; } # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic_F77"; then { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_pic_works_F77+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_pic_works_F77=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic_F77" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:14435: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:14439: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works_F77=yes fi fi $rm conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_F77" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_F77" >&6; } if test x"$lt_cv_prog_compiler_pic_works_F77" = xyes; then case $lt_prog_compiler_pic_F77 in "" | " "*) ;; *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;; esac else lt_prog_compiler_pic_F77= lt_prog_compiler_can_build_shared_F77=no fi fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_F77= ;; *) lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77" ;; esac # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\" { echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_static_works_F77+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_static_works_F77=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works_F77=yes fi else lt_cv_prog_compiler_static_works_F77=yes fi fi $rm -r conftest* LDFLAGS="$save_LDFLAGS" fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_F77" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_static_works_F77" >&6; } if test x"$lt_cv_prog_compiler_static_works_F77" = xyes; then : else lt_prog_compiler_static_F77= fi { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_c_o_F77=no $rm -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:14539: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:14543: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_F77=yes fi fi chmod u+w . 2>&5 $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files $rm out/* && rmdir out cd .. rmdir conftest $rm conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } hard_links=yes $rm conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { echo "$as_me:$LINENO: result: $hard_links" >&5 echo "${ECHO_T}$hard_links" >&6; } if test "$hard_links" = no; then { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } runpath_var= allow_undefined_flag_F77= enable_shared_with_static_runtimes_F77=no archive_cmds_F77= archive_expsym_cmds_F77= old_archive_From_new_cmds_F77= old_archive_from_expsyms_cmds_F77= export_dynamic_flag_spec_F77= whole_archive_flag_spec_F77= thread_safe_flag_spec_F77= hardcode_libdir_flag_spec_F77= hardcode_libdir_flag_spec_ld_F77= hardcode_libdir_separator_F77= hardcode_direct_F77=no hardcode_minus_L_F77=no hardcode_shlibpath_var_F77=unsupported link_all_deplibs_F77=unknown hardcode_automatic_F77=no module_cmds_F77= module_expsym_cmds_F77= always_export_symbols_F77=no export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms_F77= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. exclude_expsyms_F77='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. extract_expsyms_cmds= # Just being paranoid about ensuring that cc_basename is set. for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` case $host_os in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; esac ld_shlibs_F77=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec_F77='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec_F77= fi supports_anon_versioning=no case `$LD -v 2>/dev/null` in *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs_F77=no cat <&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. EOF fi ;; amigaos*) archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec_F77='-L$libdir' hardcode_minus_L_F77=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we can't use # them. ld_shlibs_F77=no ;; beos*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then allow_undefined_flag_F77=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs_F77=no fi ;; cygwin* | mingw* | pw32*) # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec_F77='-L$libdir' allow_undefined_flag_F77=unsupported always_export_symbols_F77=no enable_shared_with_static_runtimes_F77=yes export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs_F77=no fi ;; interix[3-9]*) hardcode_direct_F77=no hardcode_shlibpath_var_F77=no hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' export_dynamic_flag_spec_F77='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | k*bsd*-gnu) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then tmp_addflag= case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; *) tmp_sharedflag='-shared' ;; esac archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test $supports_anon_versioning = yes; then archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ $echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi link_all_deplibs_F77=no else ld_shlibs_F77=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ld_shlibs_F77=no cat <&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. EOF elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs_F77=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ld_shlibs_F77=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' else ld_shlibs_F77=no fi ;; esac ;; sunos4*) archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct_F77=yes hardcode_shlibpath_var_F77=no ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs_F77=no fi ;; esac if test "$ld_shlibs_F77" = no; then runpath_var= hardcode_libdir_flag_spec_F77= export_dynamic_flag_spec_F77= whole_archive_flag_spec_F77= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag_F77=unsupported always_export_symbols_F77=yes archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L_F77=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct_F77=unsupported fi ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | grep 'GNU' > /dev/null; then export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds_F77='' hardcode_direct_F77=yes hardcode_libdir_separator_F77=':' link_all_deplibs_F77=yes if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct_F77=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L_F77=yes hardcode_libdir_flag_spec_F77='-L$libdir' hardcode_libdir_separator_F77= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols_F77=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag_F77='-berok' # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF program main end _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_f77_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag_F77="-z nodefs" archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF program main end _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_f77_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag_F77=' ${wl}-bernotok' allow_undefined_flag_F77=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec_F77='$convenience' archive_cmds_need_lc_F77=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec_F77='-L$libdir' hardcode_minus_L_F77=yes # see comment about different semantics on the GNU ld section ld_shlibs_F77=no ;; bsdi[45]*) export_dynamic_flag_spec_F77=-rdynamic ;; cygwin* | mingw* | pw32*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec_F77=' ' allow_undefined_flag_F77=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_From_new_cmds_F77='true' # FIXME: Should let the user specify the lib program. old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs' fix_srcfile_path_F77='`cygpath -w "$srcfile"`' enable_shared_with_static_runtimes_F77=yes ;; darwin* | rhapsody*) case $host_os in rhapsody* | darwin1.[012]) allow_undefined_flag_F77='${wl}-undefined ${wl}suppress' ;; *) # Darwin 1.3 on if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' else case ${MACOSX_DEPLOYMENT_TARGET} in 10.[012]) allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup' ;; esac fi ;; esac archive_cmds_need_lc_F77=no hardcode_direct_F77=no hardcode_automatic_F77=yes hardcode_shlibpath_var_F77=unsupported whole_archive_flag_spec_F77='' link_all_deplibs_F77=yes if test "$GCC" = yes ; then output_verbose_link_cmd='echo' archive_cmds_F77="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds_F77="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds_F77="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds_F77="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" else case $cc_basename in xlc*) output_verbose_link_cmd='echo' archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ;; *) ld_shlibs_F77=no ;; esac fi ;; dgux*) archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec_F77='-L$libdir' hardcode_shlibpath_var_F77=no ;; freebsd1*) ld_shlibs_F77=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec_F77='-R$libdir' hardcode_direct_F77=yes hardcode_shlibpath_var_F77=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct_F77=yes hardcode_minus_L_F77=yes hardcode_shlibpath_var_F77=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec_F77='-R$libdir' hardcode_direct_F77=yes hardcode_shlibpath_var_F77=no ;; hpux9*) if test "$GCC" = yes; then archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' hardcode_libdir_separator_F77=: hardcode_direct_F77=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L_F77=yes export_dynamic_flag_spec_F77='${wl}-E' ;; hpux10*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' hardcode_libdir_separator_F77=: hardcode_direct_F77=yes export_dynamic_flag_spec_F77='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L_F77=yes fi ;; hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' hardcode_libdir_separator_F77=: case $host_cpu in hppa*64*|ia64*) hardcode_libdir_flag_spec_ld_F77='+b $libdir' hardcode_direct_F77=no hardcode_shlibpath_var_F77=no ;; *) hardcode_direct_F77=yes export_dynamic_flag_spec_F77='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L_F77=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_ld_F77='-rpath $libdir' fi hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_F77=: link_all_deplibs_F77=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec_F77='-R$libdir' hardcode_direct_F77=yes hardcode_shlibpath_var_F77=no ;; newsos6) archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct_F77=yes hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_F77=: hardcode_shlibpath_var_F77=no ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct_F77=yes hardcode_shlibpath_var_F77=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' export_dynamic_flag_spec_F77='${wl}-E' else case $host_os in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec_F77='-R$libdir' ;; *) archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' ;; esac fi else ld_shlibs_F77=no fi ;; os2*) hardcode_libdir_flag_spec_F77='-L$libdir' hardcode_minus_L_F77=yes allow_undefined_flag_F77=unsupported archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag_F77=' -expect_unresolved \*' archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' fi hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_F77=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' else allow_undefined_flag_F77=' -expect_unresolved \*' archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec_F77='-rpath $libdir' fi hardcode_libdir_separator_F77=: ;; solaris*) no_undefined_flag_F77=' -z text' if test "$GCC" = yes; then wlarc='${wl}' archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else wlarc='' archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' fi hardcode_libdir_flag_spec_F77='-R$libdir' hardcode_shlibpath_var_F77=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' fi ;; esac link_all_deplibs_F77=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec_F77='-L$libdir' hardcode_direct_F77=yes hardcode_minus_L_F77=yes hardcode_shlibpath_var_F77=no ;; sysv4) case $host_vendor in sni) archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct_F77=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' reload_cmds_F77='$CC -r -o $output$reload_objs' hardcode_direct_F77=no ;; motorola) archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' hardcode_shlibpath_var_F77=no ;; sysv4.3*) archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var_F77=no export_dynamic_flag_spec_F77='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var_F77=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs_F77=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag_F77='${wl}-z,text' archive_cmds_need_lc_F77=no hardcode_shlibpath_var_F77=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag_F77='${wl}-z,text' allow_undefined_flag_F77='${wl}-z,nodefs' archive_cmds_need_lc_F77=no hardcode_shlibpath_var_F77=no hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' hardcode_libdir_separator_F77=':' link_all_deplibs_F77=yes export_dynamic_flag_spec_F77='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec_F77='-L$libdir' hardcode_shlibpath_var_F77=no ;; *) ld_shlibs_F77=no ;; esac fi { echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 echo "${ECHO_T}$ld_shlibs_F77" >&6; } test "$ld_shlibs_F77" = no && can_build_shared=no # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc_F77" in x|xyes) # Assume -lc should be added archive_cmds_need_lc_F77=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds_F77 in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } $rm conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl_F77 pic_flag=$lt_prog_compiler_pic_F77 compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag_F77 allow_undefined_flag_F77= if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } then archive_cmds_need_lc_F77=no else archive_cmds_need_lc_F77=yes fi allow_undefined_flag_F77=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $rm conftest* { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6; } ;; esac fi ;; esac { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin* | yes,mingw* | yes,pw32*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH printed by # mingw gcc, but we are running on Cygwin. Gcc prints its search # path with ; separators, and with drive letters. We can handle the # drive letters (cygwin fileutils understands them), so leave them, # especially as we might pass files found there to a mingw objdump, # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac ;; *) library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[123]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; interix[3-9]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; nto-qnx*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no export_dynamic_flag_spec='${wl}-Blargedynsym' runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' shlibpath_overrides_runpath=no else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' shlibpath_overrides_runpath=yes case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { echo "$as_me:$LINENO: result: $dynamic_linker" >&5 echo "${ECHO_T}$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" fi sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" fi sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } hardcode_action_F77= if test -n "$hardcode_libdir_flag_spec_F77" || \ test -n "$runpath_var_F77" || \ test "X$hardcode_automatic_F77" = "Xyes" ; then # We can hardcode non-existant directories. if test "$hardcode_direct_F77" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no && test "$hardcode_minus_L_F77" != no; then # Linking always hardcodes the temporary library directory. hardcode_action_F77=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action_F77=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action_F77=unsupported fi { echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 echo "${ECHO_T}$hardcode_action_F77" >&6; } if test "$hardcode_action_F77" = relink; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi # The else clause should only fire when bootstrapping the # libtool distribution, otherwise you forgot to ship ltmain.sh # with your package, and you will get complaints that there are # no rules to generate ltmain.sh. if test -f "$ltmain"; then # See if we are running on zsh, and set the options which allow our commands through # without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ deplibs_check_method reload_flag reload_cmds need_locks \ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ old_postinstall_cmds old_postuninstall_cmds \ compiler_F77 \ CC_F77 \ LD_F77 \ lt_prog_compiler_wl_F77 \ lt_prog_compiler_pic_F77 \ lt_prog_compiler_static_F77 \ lt_prog_compiler_no_builtin_flag_F77 \ export_dynamic_flag_spec_F77 \ thread_safe_flag_spec_F77 \ whole_archive_flag_spec_F77 \ enable_shared_with_static_runtimes_F77 \ old_archive_cmds_F77 \ old_archive_from_new_cmds_F77 \ predep_objects_F77 \ postdep_objects_F77 \ predeps_F77 \ postdeps_F77 \ compiler_lib_search_path_F77 \ compiler_lib_search_dirs_F77 \ archive_cmds_F77 \ archive_expsym_cmds_F77 \ postinstall_cmds_F77 \ postuninstall_cmds_F77 \ old_archive_from_expsyms_cmds_F77 \ allow_undefined_flag_F77 \ no_undefined_flag_F77 \ export_symbols_cmds_F77 \ hardcode_libdir_flag_spec_F77 \ hardcode_libdir_flag_spec_ld_F77 \ hardcode_libdir_separator_F77 \ hardcode_automatic_F77 \ module_cmds_F77 \ module_expsym_cmds_F77 \ lt_cv_prog_compiler_c_o_F77 \ fix_srcfile_path_F77 \ exclude_expsyms_F77 \ include_expsyms_F77; do case $var in old_archive_cmds_F77 | \ old_archive_from_new_cmds_F77 | \ archive_cmds_F77 | \ archive_expsym_cmds_F77 | \ module_cmds_F77 | \ module_expsym_cmds_F77 | \ old_archive_from_expsyms_cmds_F77 | \ export_symbols_cmds_F77 | \ extract_expsyms_cmds | reload_cmds | finish_cmds | \ postinstall_cmds | postuninstall_cmds | \ old_postinstall_cmds | old_postuninstall_cmds | \ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) # Double-quote double-evaled strings. eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ;; *) eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ;; esac done case $lt_echo in *'\$0 --fallback-echo"') lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ;; esac cfgfile="$ofile" cat <<__EOF__ >> "$cfgfile" # ### BEGIN LIBTOOL TAG CONFIG: $tagname # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc_F77 # Whether or not to disallow shared libs when runtime libs are static allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77 # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # A C compiler. LTCC=$lt_LTCC # LTCC compiler flags. LTCFLAGS=$lt_LTCFLAGS # A language-specific compiler. CC=$lt_compiler_F77 # Is the compiler the GNU C compiler? with_gcc=$GCC_F77 # An ERE matcher. EGREP=$lt_EGREP # The linker used to build libraries. LD=$lt_LD_F77 # Whether we need hard or soft links. LN_S=$lt_LN_S # A BSD-compatible nm program. NM=$lt_NM # A symbol stripping program STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD # Used on cygwin: DLL creation program. DLLTOOL="$DLLTOOL" # Used on cygwin: object dumper. OBJDUMP="$OBJDUMP" # Used on cygwin: assembler. AS="$AS" # The name of the directory that contains temporary libtool files. objdir=$objdir # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl_F77 # Object file suffix (normally "o"). objext="$ac_objext" # Old archive suffix (normally "a"). libext="$libext" # Shared library suffix (normally ".so"). shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic_F77 pic_mode=$pic_mode # What is the maximum length of a command? max_cmd_len=$lt_cv_sys_max_cmd_len # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77 # Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static_F77 # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77 # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77 # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77 # Compiler flag to generate thread-safe objects. thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77 # Library versioning type. version_type=$version_type # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Commands used to build and install an old-style archive. RANLIB=$lt_RANLIB old_archive_cmds=$lt_old_archive_cmds_F77 old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77 # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77 # Commands used to build and install a shared archive. archive_cmds=$lt_archive_cmds_F77 archive_expsym_cmds=$lt_archive_expsym_cmds_F77 postinstall_cmds=$lt_postinstall_cmds postuninstall_cmds=$lt_postuninstall_cmds # Commands used to build a loadable module (assumed same as above if empty) module_cmds=$lt_module_cmds_F77 module_expsym_cmds=$lt_module_expsym_cmds_F77 # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # Dependencies to place before the objects being linked to create a # shared library. predep_objects=$lt_predep_objects_F77 # Dependencies to place after the objects being linked to create a # shared library. postdep_objects=$lt_postdep_objects_F77 # Dependencies to place before the objects being linked to create a # shared library. predeps=$lt_predeps_F77 # Dependencies to place after the objects being linked to create a # shared library. postdeps=$lt_postdeps_F77 # The directories searched by this compiler when creating a shared # library compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_F77 # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_compiler_lib_search_path_F77 # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == file_magic. file_magic_cmd=$lt_file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag_F77 # Flag that forces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag_F77 # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # Same as above, but a single script fragment to be evaled but not shown. finish_eval=$lt_finish_eval # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. runpath_var=$runpath_var # This is the shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action_F77 # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 # Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the # resulting binary. hardcode_direct=$hardcode_direct_F77 # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=$hardcode_minus_L_F77 # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var_F77 # Set to yes if building a shared library automatically hardcodes DIR into the library # and all subsequent libraries and executables linked against it. hardcode_automatic=$hardcode_automatic_F77 # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs_F77 # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path=$lt_fix_srcfile_path # Set to yes if exported symbols are required. always_export_symbols=$always_export_symbols_F77 # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds_F77 # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms_F77 # Symbols that must always be exported. include_expsyms=$lt_include_expsyms_F77 # ### END LIBTOOL TAG CONFIG: $tagname __EOF__ else # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` if test -f "$ltmain_in"; then test -f Makefile && make "$ltmain" fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC="$lt_save_CC" else tagname="" fi ;; GCJ) if test -n "$GCJ" && test "X$GCJ" != "Xno"; then # Source file extension for Java test sources. ac_ext=java # Object file extension for compiled Java test sources. objext=o objext_GCJ=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="class foo {}" # Code to be used in simple link tests lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $rm conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $rm -r conftest* # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${GCJ-"gcj"} compiler=$CC compiler_GCJ=$CC for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` # GCJ did not exist at the time GCC didn't implicitly link libc in. archive_cmds_need_lc_GCJ=no old_archive_cmds_GCJ=$old_archive_cmds lt_prog_compiler_no_builtin_flag_GCJ= if test "$GCC" = yes; then lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_rtti_exceptions=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-fno-rtti -fno-exceptions" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:16759: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:16763: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes fi fi $rm conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" else : fi fi lt_prog_compiler_wl_GCJ= lt_prog_compiler_pic_GCJ= lt_prog_compiler_static_GCJ= { echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } if test "$GCC" = yes; then lt_prog_compiler_wl_GCJ='-Wl,' lt_prog_compiler_static_GCJ='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_GCJ='-Bstatic' fi ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic_GCJ='-fno-common' ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. lt_prog_compiler_can_build_shared_GCJ=no enable_shared=no ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic_GCJ=-Kconform_pic fi ;; hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic_GCJ='-fPIC' ;; esac ;; *) lt_prog_compiler_pic_GCJ='-fPIC' ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) lt_prog_compiler_wl_GCJ='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_GCJ='-Bstatic' else lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp' fi ;; darwin*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files case $cc_basename in xlc*) lt_prog_compiler_pic_GCJ='-qnocommon' lt_prog_compiler_wl_GCJ='-Wl,' ;; esac ;; mingw* | cygwin* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). ;; hpux9* | hpux10* | hpux11*) lt_prog_compiler_wl_GCJ='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic_GCJ='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) lt_prog_compiler_wl_GCJ='-Wl,' # PIC (with -KPIC) is the default. lt_prog_compiler_static_GCJ='-non_shared' ;; newsos6) lt_prog_compiler_pic_GCJ='-KPIC' lt_prog_compiler_static_GCJ='-Bstatic' ;; linux* | k*bsd*-gnu) case $cc_basename in icc* | ecc*) lt_prog_compiler_wl_GCJ='-Wl,' lt_prog_compiler_pic_GCJ='-KPIC' lt_prog_compiler_static_GCJ='-static' ;; pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl_GCJ='-Wl,' lt_prog_compiler_pic_GCJ='-fpic' lt_prog_compiler_static_GCJ='-Bstatic' ;; ccc*) lt_prog_compiler_wl_GCJ='-Wl,' # All Alpha code is PIC. lt_prog_compiler_static_GCJ='-non_shared' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic_GCJ='-KPIC' lt_prog_compiler_static_GCJ='-Bstatic' lt_prog_compiler_wl_GCJ='-Wl,' ;; *Sun\ F*) # Sun Fortran 8.3 passes all unrecognized flags to the linker lt_prog_compiler_pic_GCJ='-KPIC' lt_prog_compiler_static_GCJ='-Bstatic' lt_prog_compiler_wl_GCJ='' ;; esac ;; esac ;; osf3* | osf4* | osf5*) lt_prog_compiler_wl_GCJ='-Wl,' # All OSF/1 code is PIC. lt_prog_compiler_static_GCJ='-non_shared' ;; rdos*) lt_prog_compiler_static_GCJ='-non_shared' ;; solaris*) lt_prog_compiler_pic_GCJ='-KPIC' lt_prog_compiler_static_GCJ='-Bstatic' case $cc_basename in f77* | f90* | f95*) lt_prog_compiler_wl_GCJ='-Qoption ld ';; *) lt_prog_compiler_wl_GCJ='-Wl,';; esac ;; sunos4*) lt_prog_compiler_wl_GCJ='-Qoption ld ' lt_prog_compiler_pic_GCJ='-PIC' lt_prog_compiler_static_GCJ='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) lt_prog_compiler_wl_GCJ='-Wl,' lt_prog_compiler_pic_GCJ='-KPIC' lt_prog_compiler_static_GCJ='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then lt_prog_compiler_pic_GCJ='-Kconform_pic' lt_prog_compiler_static_GCJ='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) lt_prog_compiler_wl_GCJ='-Wl,' lt_prog_compiler_pic_GCJ='-KPIC' lt_prog_compiler_static_GCJ='-Bstatic' ;; unicos*) lt_prog_compiler_wl_GCJ='-Wl,' lt_prog_compiler_can_build_shared_GCJ=no ;; uts4*) lt_prog_compiler_pic_GCJ='-pic' lt_prog_compiler_static_GCJ='-Bstatic' ;; *) lt_prog_compiler_can_build_shared_GCJ=no ;; esac fi { echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6; } # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic_GCJ"; then { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_pic_works_GCJ+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_pic_works_GCJ=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic_GCJ" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:17049: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:17053: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works_GCJ=yes fi fi $rm conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_GCJ" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_GCJ" >&6; } if test x"$lt_cv_prog_compiler_pic_works_GCJ" = xyes; then case $lt_prog_compiler_pic_GCJ in "" | " "*) ;; *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;; esac else lt_prog_compiler_pic_GCJ= lt_prog_compiler_can_build_shared_GCJ=no fi fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_GCJ= ;; *) lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ" ;; esac # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\" { echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_static_works_GCJ+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_static_works_GCJ=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works_GCJ=yes fi else lt_cv_prog_compiler_static_works_GCJ=yes fi fi $rm -r conftest* LDFLAGS="$save_LDFLAGS" fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_GCJ" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_static_works_GCJ" >&6; } if test x"$lt_cv_prog_compiler_static_works_GCJ" = xyes; then : else lt_prog_compiler_static_GCJ= fi { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_c_o_GCJ=no $rm -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:17153: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:17157: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_GCJ=yes fi fi chmod u+w . 2>&5 $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files $rm out/* && rmdir out cd .. rmdir conftest $rm conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } hard_links=yes $rm conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { echo "$as_me:$LINENO: result: $hard_links" >&5 echo "${ECHO_T}$hard_links" >&6; } if test "$hard_links" = no; then { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } runpath_var= allow_undefined_flag_GCJ= enable_shared_with_static_runtimes_GCJ=no archive_cmds_GCJ= archive_expsym_cmds_GCJ= old_archive_From_new_cmds_GCJ= old_archive_from_expsyms_cmds_GCJ= export_dynamic_flag_spec_GCJ= whole_archive_flag_spec_GCJ= thread_safe_flag_spec_GCJ= hardcode_libdir_flag_spec_GCJ= hardcode_libdir_flag_spec_ld_GCJ= hardcode_libdir_separator_GCJ= hardcode_direct_GCJ=no hardcode_minus_L_GCJ=no hardcode_shlibpath_var_GCJ=unsupported link_all_deplibs_GCJ=unknown hardcode_automatic_GCJ=no module_cmds_GCJ= module_expsym_cmds_GCJ= always_export_symbols_GCJ=no export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms_GCJ= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. exclude_expsyms_GCJ='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. extract_expsyms_cmds= # Just being paranoid about ensuring that cc_basename is set. for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` case $host_os in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; esac ld_shlibs_GCJ=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec_GCJ= fi supports_anon_versioning=no case `$LD -v 2>/dev/null` in *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs_GCJ=no cat <&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. EOF fi ;; amigaos*) archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec_GCJ='-L$libdir' hardcode_minus_L_GCJ=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we can't use # them. ld_shlibs_GCJ=no ;; beos*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then allow_undefined_flag_GCJ=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs_GCJ=no fi ;; cygwin* | mingw* | pw32*) # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec_GCJ='-L$libdir' allow_undefined_flag_GCJ=unsupported always_export_symbols_GCJ=no enable_shared_with_static_runtimes_GCJ=yes export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs_GCJ=no fi ;; interix[3-9]*) hardcode_direct_GCJ=no hardcode_shlibpath_var_GCJ=no hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' export_dynamic_flag_spec_GCJ='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | k*bsd*-gnu) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then tmp_addflag= case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; *) tmp_sharedflag='-shared' ;; esac archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test $supports_anon_versioning = yes; then archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ $echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi link_all_deplibs_GCJ=no else ld_shlibs_GCJ=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ld_shlibs_GCJ=no cat <&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. EOF elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs_GCJ=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ld_shlibs_GCJ=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' else ld_shlibs_GCJ=no fi ;; esac ;; sunos4*) archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct_GCJ=yes hardcode_shlibpath_var_GCJ=no ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs_GCJ=no fi ;; esac if test "$ld_shlibs_GCJ" = no; then runpath_var= hardcode_libdir_flag_spec_GCJ= export_dynamic_flag_spec_GCJ= whole_archive_flag_spec_GCJ= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag_GCJ=unsupported always_export_symbols_GCJ=yes archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L_GCJ=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct_GCJ=unsupported fi ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | grep 'GNU' > /dev/null; then export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds_GCJ='' hardcode_direct_GCJ=yes hardcode_libdir_separator_GCJ=':' link_all_deplibs_GCJ=yes if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct_GCJ=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L_GCJ=yes hardcode_libdir_flag_spec_GCJ='-L$libdir' hardcode_libdir_separator_GCJ= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols_GCJ=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag_GCJ='-berok' # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag_GCJ="-z nodefs" archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag_GCJ=' ${wl}-bernotok' allow_undefined_flag_GCJ=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec_GCJ='$convenience' archive_cmds_need_lc_GCJ=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec_GCJ='-L$libdir' hardcode_minus_L_GCJ=yes # see comment about different semantics on the GNU ld section ld_shlibs_GCJ=no ;; bsdi[45]*) export_dynamic_flag_spec_GCJ=-rdynamic ;; cygwin* | mingw* | pw32*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec_GCJ=' ' allow_undefined_flag_GCJ=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_From_new_cmds_GCJ='true' # FIXME: Should let the user specify the lib program. old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs' fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`' enable_shared_with_static_runtimes_GCJ=yes ;; darwin* | rhapsody*) case $host_os in rhapsody* | darwin1.[012]) allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress' ;; *) # Darwin 1.3 on if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' else case ${MACOSX_DEPLOYMENT_TARGET} in 10.[012]) allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup' ;; esac fi ;; esac archive_cmds_need_lc_GCJ=no hardcode_direct_GCJ=no hardcode_automatic_GCJ=yes hardcode_shlibpath_var_GCJ=unsupported whole_archive_flag_spec_GCJ='' link_all_deplibs_GCJ=yes if test "$GCC" = yes ; then output_verbose_link_cmd='echo' archive_cmds_GCJ="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds_GCJ="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds_GCJ="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds_GCJ="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" else case $cc_basename in xlc*) output_verbose_link_cmd='echo' archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ;; *) ld_shlibs_GCJ=no ;; esac fi ;; dgux*) archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec_GCJ='-L$libdir' hardcode_shlibpath_var_GCJ=no ;; freebsd1*) ld_shlibs_GCJ=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec_GCJ='-R$libdir' hardcode_direct_GCJ=yes hardcode_shlibpath_var_GCJ=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct_GCJ=yes hardcode_minus_L_GCJ=yes hardcode_shlibpath_var_GCJ=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec_GCJ='-R$libdir' hardcode_direct_GCJ=yes hardcode_shlibpath_var_GCJ=no ;; hpux9*) if test "$GCC" = yes; then archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' hardcode_libdir_separator_GCJ=: hardcode_direct_GCJ=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L_GCJ=yes export_dynamic_flag_spec_GCJ='${wl}-E' ;; hpux10*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' hardcode_libdir_separator_GCJ=: hardcode_direct_GCJ=yes export_dynamic_flag_spec_GCJ='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L_GCJ=yes fi ;; hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' hardcode_libdir_separator_GCJ=: case $host_cpu in hppa*64*|ia64*) hardcode_libdir_flag_spec_ld_GCJ='+b $libdir' hardcode_direct_GCJ=no hardcode_shlibpath_var_GCJ=no ;; *) hardcode_direct_GCJ=yes export_dynamic_flag_spec_GCJ='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L_GCJ=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir' fi hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_GCJ=: link_all_deplibs_GCJ=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec_GCJ='-R$libdir' hardcode_direct_GCJ=yes hardcode_shlibpath_var_GCJ=no ;; newsos6) archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct_GCJ=yes hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_GCJ=: hardcode_shlibpath_var_GCJ=no ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct_GCJ=yes hardcode_shlibpath_var_GCJ=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' export_dynamic_flag_spec_GCJ='${wl}-E' else case $host_os in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec_GCJ='-R$libdir' ;; *) archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' ;; esac fi else ld_shlibs_GCJ=no fi ;; os2*) hardcode_libdir_flag_spec_GCJ='-L$libdir' hardcode_minus_L_GCJ=yes allow_undefined_flag_GCJ=unsupported archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag_GCJ=' -expect_unresolved \*' archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' fi hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_GCJ=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' else allow_undefined_flag_GCJ=' -expect_unresolved \*' archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec_GCJ='-rpath $libdir' fi hardcode_libdir_separator_GCJ=: ;; solaris*) no_undefined_flag_GCJ=' -z text' if test "$GCC" = yes; then wlarc='${wl}' archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else wlarc='' archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' fi hardcode_libdir_flag_spec_GCJ='-R$libdir' hardcode_shlibpath_var_GCJ=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' fi ;; esac link_all_deplibs_GCJ=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec_GCJ='-L$libdir' hardcode_direct_GCJ=yes hardcode_minus_L_GCJ=yes hardcode_shlibpath_var_GCJ=no ;; sysv4) case $host_vendor in sni) archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct_GCJ=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' reload_cmds_GCJ='$CC -r -o $output$reload_objs' hardcode_direct_GCJ=no ;; motorola) archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' hardcode_shlibpath_var_GCJ=no ;; sysv4.3*) archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var_GCJ=no export_dynamic_flag_spec_GCJ='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var_GCJ=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs_GCJ=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag_GCJ='${wl}-z,text' archive_cmds_need_lc_GCJ=no hardcode_shlibpath_var_GCJ=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag_GCJ='${wl}-z,text' allow_undefined_flag_GCJ='${wl}-z,nodefs' archive_cmds_need_lc_GCJ=no hardcode_shlibpath_var_GCJ=no hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' hardcode_libdir_separator_GCJ=':' link_all_deplibs_GCJ=yes export_dynamic_flag_spec_GCJ='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec_GCJ='-L$libdir' hardcode_shlibpath_var_GCJ=no ;; *) ld_shlibs_GCJ=no ;; esac fi { echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 echo "${ECHO_T}$ld_shlibs_GCJ" >&6; } test "$ld_shlibs_GCJ" = no && can_build_shared=no # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc_GCJ" in x|xyes) # Assume -lc should be added archive_cmds_need_lc_GCJ=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds_GCJ in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } $rm conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl_GCJ pic_flag=$lt_prog_compiler_pic_GCJ compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ allow_undefined_flag_GCJ= if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } then archive_cmds_need_lc_GCJ=no else archive_cmds_need_lc_GCJ=yes fi allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $rm conftest* { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6; } ;; esac fi ;; esac { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin* | yes,mingw* | yes,pw32*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH printed by # mingw gcc, but we are running on Cygwin. Gcc prints its search # path with ; separators, and with drive letters. We can handle the # drive letters (cygwin fileutils understands them), so leave them, # especially as we might pass files found there to a mingw objdump, # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac ;; *) library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[123]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; interix[3-9]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; nto-qnx*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no export_dynamic_flag_spec='${wl}-Blargedynsym' runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' shlibpath_overrides_runpath=no else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' shlibpath_overrides_runpath=yes case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { echo "$as_me:$LINENO: result: $dynamic_linker" >&5 echo "${ECHO_T}$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" fi sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" fi sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } hardcode_action_GCJ= if test -n "$hardcode_libdir_flag_spec_GCJ" || \ test -n "$runpath_var_GCJ" || \ test "X$hardcode_automatic_GCJ" = "Xyes" ; then # We can hardcode non-existant directories. if test "$hardcode_direct_GCJ" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && test "$hardcode_minus_L_GCJ" != no; then # Linking always hardcodes the temporary library directory. hardcode_action_GCJ=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action_GCJ=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action_GCJ=unsupported fi { echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 echo "${ECHO_T}$hardcode_action_GCJ" >&6; } if test "$hardcode_action_GCJ" = relink; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi # The else clause should only fire when bootstrapping the # libtool distribution, otherwise you forgot to ship ltmain.sh # with your package, and you will get complaints that there are # no rules to generate ltmain.sh. if test -f "$ltmain"; then # See if we are running on zsh, and set the options which allow our commands through # without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ deplibs_check_method reload_flag reload_cmds need_locks \ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ old_postinstall_cmds old_postuninstall_cmds \ compiler_GCJ \ CC_GCJ \ LD_GCJ \ lt_prog_compiler_wl_GCJ \ lt_prog_compiler_pic_GCJ \ lt_prog_compiler_static_GCJ \ lt_prog_compiler_no_builtin_flag_GCJ \ export_dynamic_flag_spec_GCJ \ thread_safe_flag_spec_GCJ \ whole_archive_flag_spec_GCJ \ enable_shared_with_static_runtimes_GCJ \ old_archive_cmds_GCJ \ old_archive_from_new_cmds_GCJ \ predep_objects_GCJ \ postdep_objects_GCJ \ predeps_GCJ \ postdeps_GCJ \ compiler_lib_search_path_GCJ \ compiler_lib_search_dirs_GCJ \ archive_cmds_GCJ \ archive_expsym_cmds_GCJ \ postinstall_cmds_GCJ \ postuninstall_cmds_GCJ \ old_archive_from_expsyms_cmds_GCJ \ allow_undefined_flag_GCJ \ no_undefined_flag_GCJ \ export_symbols_cmds_GCJ \ hardcode_libdir_flag_spec_GCJ \ hardcode_libdir_flag_spec_ld_GCJ \ hardcode_libdir_separator_GCJ \ hardcode_automatic_GCJ \ module_cmds_GCJ \ module_expsym_cmds_GCJ \ lt_cv_prog_compiler_c_o_GCJ \ fix_srcfile_path_GCJ \ exclude_expsyms_GCJ \ include_expsyms_GCJ; do case $var in old_archive_cmds_GCJ | \ old_archive_from_new_cmds_GCJ | \ archive_cmds_GCJ | \ archive_expsym_cmds_GCJ | \ module_cmds_GCJ | \ module_expsym_cmds_GCJ | \ old_archive_from_expsyms_cmds_GCJ | \ export_symbols_cmds_GCJ | \ extract_expsyms_cmds | reload_cmds | finish_cmds | \ postinstall_cmds | postuninstall_cmds | \ old_postinstall_cmds | old_postuninstall_cmds | \ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) # Double-quote double-evaled strings. eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ;; *) eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ;; esac done case $lt_echo in *'\$0 --fallback-echo"') lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ;; esac cfgfile="$ofile" cat <<__EOF__ >> "$cfgfile" # ### BEGIN LIBTOOL TAG CONFIG: $tagname # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc_GCJ # Whether or not to disallow shared libs when runtime libs are static allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # A C compiler. LTCC=$lt_LTCC # LTCC compiler flags. LTCFLAGS=$lt_LTCFLAGS # A language-specific compiler. CC=$lt_compiler_GCJ # Is the compiler the GNU C compiler? with_gcc=$GCC_GCJ # An ERE matcher. EGREP=$lt_EGREP # The linker used to build libraries. LD=$lt_LD_GCJ # Whether we need hard or soft links. LN_S=$lt_LN_S # A BSD-compatible nm program. NM=$lt_NM # A symbol stripping program STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD # Used on cygwin: DLL creation program. DLLTOOL="$DLLTOOL" # Used on cygwin: object dumper. OBJDUMP="$OBJDUMP" # Used on cygwin: assembler. AS="$AS" # The name of the directory that contains temporary libtool files. objdir=$objdir # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl_GCJ # Object file suffix (normally "o"). objext="$ac_objext" # Old archive suffix (normally "a"). libext="$libext" # Shared library suffix (normally ".so"). shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic_GCJ pic_mode=$pic_mode # What is the maximum length of a command? max_cmd_len=$lt_cv_sys_max_cmd_len # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ # Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static_GCJ # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ # Compiler flag to generate thread-safe objects. thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ # Library versioning type. version_type=$version_type # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Commands used to build and install an old-style archive. RANLIB=$lt_RANLIB old_archive_cmds=$lt_old_archive_cmds_GCJ old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ # Commands used to build and install a shared archive. archive_cmds=$lt_archive_cmds_GCJ archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ postinstall_cmds=$lt_postinstall_cmds postuninstall_cmds=$lt_postuninstall_cmds # Commands used to build a loadable module (assumed same as above if empty) module_cmds=$lt_module_cmds_GCJ module_expsym_cmds=$lt_module_expsym_cmds_GCJ # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # Dependencies to place before the objects being linked to create a # shared library. predep_objects=$lt_predep_objects_GCJ # Dependencies to place after the objects being linked to create a # shared library. postdep_objects=$lt_postdep_objects_GCJ # Dependencies to place before the objects being linked to create a # shared library. predeps=$lt_predeps_GCJ # Dependencies to place after the objects being linked to create a # shared library. postdeps=$lt_postdeps_GCJ # The directories searched by this compiler when creating a shared # library compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_GCJ # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == file_magic. file_magic_cmd=$lt_file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag_GCJ # Flag that forces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag_GCJ # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # Same as above, but a single script fragment to be evaled but not shown. finish_eval=$lt_finish_eval # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. runpath_var=$runpath_var # This is the shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action_GCJ # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ # Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the # resulting binary. hardcode_direct=$hardcode_direct_GCJ # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=$hardcode_minus_L_GCJ # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ # Set to yes if building a shared library automatically hardcodes DIR into the library # and all subsequent libraries and executables linked against it. hardcode_automatic=$hardcode_automatic_GCJ # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs_GCJ # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path=$lt_fix_srcfile_path # Set to yes if exported symbols are required. always_export_symbols=$always_export_symbols_GCJ # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds_GCJ # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms_GCJ # Symbols that must always be exported. include_expsyms=$lt_include_expsyms_GCJ # ### END LIBTOOL TAG CONFIG: $tagname __EOF__ else # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` if test -f "$ltmain_in"; then test -f Makefile && make "$ltmain" fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC="$lt_save_CC" else tagname="" fi ;; RC) # Source file extension for RC test sources. ac_ext=rc # Object file extension for compiled RC test sources. objext=o objext_RC=$objext # Code to be used in simple compile tests lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' # Code to be used in simple link tests lt_simple_link_test_code="$lt_simple_compile_test_code" # ltmain only uses $CC for tagged configurations so make sure $CC is set. # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $rm conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $rm -r conftest* # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${RC-"windres"} compiler=$CC compiler_RC=$CC for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` lt_cv_prog_compiler_c_o_RC=yes # The else clause should only fire when bootstrapping the # libtool distribution, otherwise you forgot to ship ltmain.sh # with your package, and you will get complaints that there are # no rules to generate ltmain.sh. if test -f "$ltmain"; then # See if we are running on zsh, and set the options which allow our commands through # without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ deplibs_check_method reload_flag reload_cmds need_locks \ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ old_postinstall_cmds old_postuninstall_cmds \ compiler_RC \ CC_RC \ LD_RC \ lt_prog_compiler_wl_RC \ lt_prog_compiler_pic_RC \ lt_prog_compiler_static_RC \ lt_prog_compiler_no_builtin_flag_RC \ export_dynamic_flag_spec_RC \ thread_safe_flag_spec_RC \ whole_archive_flag_spec_RC \ enable_shared_with_static_runtimes_RC \ old_archive_cmds_RC \ old_archive_from_new_cmds_RC \ predep_objects_RC \ postdep_objects_RC \ predeps_RC \ postdeps_RC \ compiler_lib_search_path_RC \ compiler_lib_search_dirs_RC \ archive_cmds_RC \ archive_expsym_cmds_RC \ postinstall_cmds_RC \ postuninstall_cmds_RC \ old_archive_from_expsyms_cmds_RC \ allow_undefined_flag_RC \ no_undefined_flag_RC \ export_symbols_cmds_RC \ hardcode_libdir_flag_spec_RC \ hardcode_libdir_flag_spec_ld_RC \ hardcode_libdir_separator_RC \ hardcode_automatic_RC \ module_cmds_RC \ module_expsym_cmds_RC \ lt_cv_prog_compiler_c_o_RC \ fix_srcfile_path_RC \ exclude_expsyms_RC \ include_expsyms_RC; do case $var in old_archive_cmds_RC | \ old_archive_from_new_cmds_RC | \ archive_cmds_RC | \ archive_expsym_cmds_RC | \ module_cmds_RC | \ module_expsym_cmds_RC | \ old_archive_from_expsyms_cmds_RC | \ export_symbols_cmds_RC | \ extract_expsyms_cmds | reload_cmds | finish_cmds | \ postinstall_cmds | postuninstall_cmds | \ old_postinstall_cmds | old_postuninstall_cmds | \ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) # Double-quote double-evaled strings. eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ;; *) eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ;; esac done case $lt_echo in *'\$0 --fallback-echo"') lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ;; esac cfgfile="$ofile" cat <<__EOF__ >> "$cfgfile" # ### BEGIN LIBTOOL TAG CONFIG: $tagname # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc_RC # Whether or not to disallow shared libs when runtime libs are static allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # A C compiler. LTCC=$lt_LTCC # LTCC compiler flags. LTCFLAGS=$lt_LTCFLAGS # A language-specific compiler. CC=$lt_compiler_RC # Is the compiler the GNU C compiler? with_gcc=$GCC_RC # An ERE matcher. EGREP=$lt_EGREP # The linker used to build libraries. LD=$lt_LD_RC # Whether we need hard or soft links. LN_S=$lt_LN_S # A BSD-compatible nm program. NM=$lt_NM # A symbol stripping program STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD # Used on cygwin: DLL creation program. DLLTOOL="$DLLTOOL" # Used on cygwin: object dumper. OBJDUMP="$OBJDUMP" # Used on cygwin: assembler. AS="$AS" # The name of the directory that contains temporary libtool files. objdir=$objdir # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl_RC # Object file suffix (normally "o"). objext="$ac_objext" # Old archive suffix (normally "a"). libext="$libext" # Shared library suffix (normally ".so"). shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic_RC pic_mode=$pic_mode # What is the maximum length of a command? max_cmd_len=$lt_cv_sys_max_cmd_len # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC # Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static_RC # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC # Compiler flag to generate thread-safe objects. thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC # Library versioning type. version_type=$version_type # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Commands used to build and install an old-style archive. RANLIB=$lt_RANLIB old_archive_cmds=$lt_old_archive_cmds_RC old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC # Commands used to build and install a shared archive. archive_cmds=$lt_archive_cmds_RC archive_expsym_cmds=$lt_archive_expsym_cmds_RC postinstall_cmds=$lt_postinstall_cmds postuninstall_cmds=$lt_postuninstall_cmds # Commands used to build a loadable module (assumed same as above if empty) module_cmds=$lt_module_cmds_RC module_expsym_cmds=$lt_module_expsym_cmds_RC # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # Dependencies to place before the objects being linked to create a # shared library. predep_objects=$lt_predep_objects_RC # Dependencies to place after the objects being linked to create a # shared library. postdep_objects=$lt_postdep_objects_RC # Dependencies to place before the objects being linked to create a # shared library. predeps=$lt_predeps_RC # Dependencies to place after the objects being linked to create a # shared library. postdeps=$lt_postdeps_RC # The directories searched by this compiler when creating a shared # library compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_RC # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_compiler_lib_search_path_RC # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == file_magic. file_magic_cmd=$lt_file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag_RC # Flag that forces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag_RC # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # Same as above, but a single script fragment to be evaled but not shown. finish_eval=$lt_finish_eval # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. runpath_var=$runpath_var # This is the shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action_RC # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC # Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the # resulting binary. hardcode_direct=$hardcode_direct_RC # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=$hardcode_minus_L_RC # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var_RC # Set to yes if building a shared library automatically hardcodes DIR into the library # and all subsequent libraries and executables linked against it. hardcode_automatic=$hardcode_automatic_RC # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs_RC # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path=$lt_fix_srcfile_path # Set to yes if exported symbols are required. always_export_symbols=$always_export_symbols_RC # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds_RC # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms_RC # Symbols that must always be exported. include_expsyms=$lt_include_expsyms_RC # ### END LIBTOOL TAG CONFIG: $tagname __EOF__ else # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` if test -f "$ltmain_in"; then test -f Makefile && make "$ltmain" fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC="$lt_save_CC" ;; *) { { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5 echo "$as_me: error: Unsupported tag name: $tagname" >&2;} { (exit 1); exit 1; }; } ;; esac # Append the new tag name to the list of available tags. if test -n "$tagname" ; then available_tags="$available_tags $tagname" fi fi done IFS="$lt_save_ifs" # Now substitute the updated list of available tags. if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then mv "${ofile}T" "$ofile" chmod +x "$ofile" else rm -f "${ofile}T" { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5 echo "$as_me: error: unable to update list of available tagged configurations." >&2;} { (exit 1); exit 1; }; } fi fi # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' # Prevent multiple expansion # Checks for libraries. ## BLUETOOTH if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_path_PKG_CONFIG+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi PKG_CONFIG=$ac_cv_path_PKG_CONFIG if test -n "$PKG_CONFIG"; then { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 echo "${ECHO_T}$PKG_CONFIG" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$ac_cv_path_PKG_CONFIG"; then ac_pt_PKG_CONFIG=$PKG_CONFIG # Extract the first word of "pkg-config", so it can be a program name with args. set dummy pkg-config; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $ac_pt_PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG if test -n "$ac_pt_PKG_CONFIG"; then { echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5 echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "x$ac_pt_PKG_CONFIG" = x; then PKG_CONFIG="" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac PKG_CONFIG=$ac_pt_PKG_CONFIG fi else PKG_CONFIG="$ac_cv_path_PKG_CONFIG" fi fi if test -n "$PKG_CONFIG"; then _pkg_min_version=0.9.0 { echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5 echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then { echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } PKG_CONFIG="" fi fi pkg_failed=no { echo "$as_me:$LINENO: checking for BLUETOOTH" >&5 echo $ECHO_N "checking for BLUETOOTH... $ECHO_C" >&6; } if test -n "$PKG_CONFIG"; then if test -n "$BLUETOOTH_CFLAGS"; then pkg_cv_BLUETOOTH_CFLAGS="$BLUETOOTH_CFLAGS" else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"bluez\"") >&5 ($PKG_CONFIG --exists --print-errors "bluez") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then pkg_cv_BLUETOOTH_CFLAGS=`$PKG_CONFIG --cflags "bluez" 2>/dev/null` else pkg_failed=yes fi fi else pkg_failed=untried fi if test -n "$PKG_CONFIG"; then if test -n "$BLUETOOTH_LIBS"; then pkg_cv_BLUETOOTH_LIBS="$BLUETOOTH_LIBS" else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"bluez\"") >&5 ($PKG_CONFIG --exists --print-errors "bluez") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then pkg_cv_BLUETOOTH_LIBS=`$PKG_CONFIG --libs "bluez" 2>/dev/null` else pkg_failed=yes fi fi else pkg_failed=untried fi if test $pkg_failed = yes; then if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then BLUETOOTH_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "bluez"` else BLUETOOTH_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "bluez"` fi # Put the nasty error message in config.log where it belongs echo "$BLUETOOTH_PKG_ERRORS" >&5 { { echo "$as_me:$LINENO: error: Package requirements (bluez) were not met: $BLUETOOTH_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables BLUETOOTH_CFLAGS and BLUETOOTH_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. " >&5 echo "$as_me: error: Package requirements (bluez) were not met: $BLUETOOTH_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables BLUETOOTH_CFLAGS and BLUETOOTH_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. " >&2;} { (exit 1); exit 1; }; } elif test $pkg_failed = untried; then { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables BLUETOOTH_CFLAGS and BLUETOOTH_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details." >&5 echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables BLUETOOTH_CFLAGS and BLUETOOTH_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } else BLUETOOTH_CFLAGS=$pkg_cv_BLUETOOTH_CFLAGS BLUETOOTH_LIBS=$pkg_cv_BLUETOOTH_LIBS { echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6; } : fi ## OPENOBEX pkg_failed=no { echo "$as_me:$LINENO: checking for OPENOBEX" >&5 echo $ECHO_N "checking for OPENOBEX... $ECHO_C" >&6; } if test -n "$PKG_CONFIG"; then if test -n "$OPENOBEX_CFLAGS"; then pkg_cv_OPENOBEX_CFLAGS="$OPENOBEX_CFLAGS" else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"openobex\"") >&5 ($PKG_CONFIG --exists --print-errors "openobex") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then pkg_cv_OPENOBEX_CFLAGS=`$PKG_CONFIG --cflags "openobex" 2>/dev/null` else pkg_failed=yes fi fi else pkg_failed=untried fi if test -n "$PKG_CONFIG"; then if test -n "$OPENOBEX_LIBS"; then pkg_cv_OPENOBEX_LIBS="$OPENOBEX_LIBS" else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"openobex\"") >&5 ($PKG_CONFIG --exists --print-errors "openobex") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then pkg_cv_OPENOBEX_LIBS=`$PKG_CONFIG --libs "openobex" 2>/dev/null` else pkg_failed=yes fi fi else pkg_failed=untried fi if test $pkg_failed = yes; then if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then OPENOBEX_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "openobex"` else OPENOBEX_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "openobex"` fi # Put the nasty error message in config.log where it belongs echo "$OPENOBEX_PKG_ERRORS" >&5 { { echo "$as_me:$LINENO: error: Package requirements (openobex) were not met: $OPENOBEX_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables OPENOBEX_CFLAGS and OPENOBEX_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. " >&5 echo "$as_me: error: Package requirements (openobex) were not met: $OPENOBEX_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables OPENOBEX_CFLAGS and OPENOBEX_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. " >&2;} { (exit 1); exit 1; }; } elif test $pkg_failed = untried; then { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables OPENOBEX_CFLAGS and OPENOBEX_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details." >&5 echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables OPENOBEX_CFLAGS and OPENOBEX_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } else OPENOBEX_CFLAGS=$pkg_cv_OPENOBEX_CFLAGS OPENOBEX_LIBS=$pkg_cv_OPENOBEX_LIBS { echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6; } : fi # Checks for header files. { echo "$as_me:$LINENO: checking for ANSI C header files" >&5 echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } if test "${ac_cv_header_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi { echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 echo "${ECHO_T}$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF #define STDC_HEADERS 1 _ACEOF fi for ac_header in arpa/inet.h fcntl.h netinet/in.h stdint.h stdlib.h string.h sys/ioctl.h sys/socket.h sys/time.h termios.h unistd.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi ac_res=`eval echo '${'$as_ac_Header'}'` { echo "$as_me:$LINENO: result: $ac_res" >&5 echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? { echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? { echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------------------- ## ## Report this to Davide Libenzi ## ## ------------------------------------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval echo '${'$as_ac_Header'}'` { echo "$as_me:$LINENO: result: $ac_res" >&5 echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done # Checks for typedefs, structures, and compiler characteristics. { echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6; } if test "${ac_cv_c_const+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { /* FIXME: Include the comments suggested by Paul. */ #ifndef __cplusplus /* Ultrix mips cc rejects this. */ typedef int charset[2]; const charset cs; /* SunOS 4.1.1 cc rejects this. */ char const *const *pcpcc; char **ppc; /* NEC SVR4.0.2 mips cc rejects this. */ struct point {int x, y;}; static struct point const zero = {0,0}; /* AIX XL C 1.02.0.0 rejects this. It does not let you subtract one const X* pointer from another in an arm of an if-expression whose if-part is not a constant expression */ const char *g = "string"; pcpcc = &g + (g ? g-g : 0); /* HPUX 7.0 cc rejects these. */ ++pcpcc; ppc = (char**) pcpcc; pcpcc = (char const *const *) ppc; { /* SCO 3.2v4 cc rejects this. */ char *t; char const *s = 0 ? (char *) 0 : (char const *) 0; *t++ = 0; if (s) return 0; } { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ int x[] = {25, 17}; const int *foo = &x[0]; ++foo; } { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ typedef const int *iptr; iptr p = 0; ++p; } { /* AIX XL C 1.02.0.0 rejects this saying "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ struct s { int j; const int *ap[3]; }; struct s *b; b->j = 5; } { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ const int foo = 10; if (!foo) return 0; } return !cs[0] && !zero.x; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_c_const=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_c_const=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 echo "${ECHO_T}$ac_cv_c_const" >&6; } if test $ac_cv_c_const = no; then cat >>confdefs.h <<\_ACEOF #define const _ACEOF fi { echo "$as_me:$LINENO: checking for int16_t" >&5 echo $ECHO_N "checking for int16_t... $ECHO_C" >&6; } if test "${ac_cv_c_int16_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_c_int16_t=no for ac_type in 'int16_t' 'int' 'long int' \ 'long long int' 'short int' 'signed char'; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { static int test_array [1 - 2 * !(0 < ($ac_type) (((($ac_type) 1 << (16 - 2)) - 1) * 2 + 1))]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { static int test_array [1 - 2 * !(($ac_type) (((($ac_type) 1 << (16 - 2)) - 1) * 2 + 1) < ($ac_type) (((($ac_type) 1 << (16 - 2)) - 1) * 2 + 2))]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 case $ac_type in int16_t) ac_cv_c_int16_t=yes ;; *) ac_cv_c_int16_t=$ac_type ;; esac fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext test "$ac_cv_c_int16_t" != no && break done fi { echo "$as_me:$LINENO: result: $ac_cv_c_int16_t" >&5 echo "${ECHO_T}$ac_cv_c_int16_t" >&6; } case $ac_cv_c_int16_t in #( no|yes) ;; #( *) cat >>confdefs.h <<_ACEOF #define int16_t $ac_cv_c_int16_t _ACEOF ;; esac { echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5 echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6; } if test "${ac_cv_header_time+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include int main () { if ((struct tm *) 0) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_header_time=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_header_time=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5 echo "${ECHO_T}$ac_cv_header_time" >&6; } if test $ac_cv_header_time = yes; then cat >>confdefs.h <<\_ACEOF #define TIME_WITH_SYS_TIME 1 _ACEOF fi { echo "$as_me:$LINENO: checking for uint16_t" >&5 echo $ECHO_N "checking for uint16_t... $ECHO_C" >&6; } if test "${ac_cv_c_uint16_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_c_uint16_t=no for ac_type in 'uint16_t' 'unsigned int' 'unsigned long int' \ 'unsigned long long int' 'unsigned short int' 'unsigned char'; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { static int test_array [1 - 2 * !(($ac_type) -1 >> (16 - 1) == 1)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then case $ac_type in uint16_t) ac_cv_c_uint16_t=yes ;; *) ac_cv_c_uint16_t=$ac_type ;; esac else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext test "$ac_cv_c_uint16_t" != no && break done fi { echo "$as_me:$LINENO: result: $ac_cv_c_uint16_t" >&5 echo "${ECHO_T}$ac_cv_c_uint16_t" >&6; } case $ac_cv_c_uint16_t in #( no|yes) ;; #( *) cat >>confdefs.h <<_ACEOF #define uint16_t $ac_cv_c_uint16_t _ACEOF ;; esac { echo "$as_me:$LINENO: checking for uint32_t" >&5 echo $ECHO_N "checking for uint32_t... $ECHO_C" >&6; } if test "${ac_cv_c_uint32_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_c_uint32_t=no for ac_type in 'uint32_t' 'unsigned int' 'unsigned long int' \ 'unsigned long long int' 'unsigned short int' 'unsigned char'; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { static int test_array [1 - 2 * !(($ac_type) -1 >> (32 - 1) == 1)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then case $ac_type in uint32_t) ac_cv_c_uint32_t=yes ;; *) ac_cv_c_uint32_t=$ac_type ;; esac else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext test "$ac_cv_c_uint32_t" != no && break done fi { echo "$as_me:$LINENO: result: $ac_cv_c_uint32_t" >&5 echo "${ECHO_T}$ac_cv_c_uint32_t" >&6; } case $ac_cv_c_uint32_t in #( no|yes) ;; #( *) cat >>confdefs.h <<\_ACEOF #define _UINT32_T 1 _ACEOF cat >>confdefs.h <<_ACEOF #define uint32_t $ac_cv_c_uint32_t _ACEOF ;; esac { echo "$as_me:$LINENO: checking for uint8_t" >&5 echo $ECHO_N "checking for uint8_t... $ECHO_C" >&6; } if test "${ac_cv_c_uint8_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_c_uint8_t=no for ac_type in 'uint8_t' 'unsigned int' 'unsigned long int' \ 'unsigned long long int' 'unsigned short int' 'unsigned char'; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { static int test_array [1 - 2 * !(($ac_type) -1 >> (8 - 1) == 1)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then case $ac_type in uint8_t) ac_cv_c_uint8_t=yes ;; *) ac_cv_c_uint8_t=$ac_type ;; esac else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext test "$ac_cv_c_uint8_t" != no && break done fi { echo "$as_me:$LINENO: result: $ac_cv_c_uint8_t" >&5 echo "${ECHO_T}$ac_cv_c_uint8_t" >&6; } case $ac_cv_c_uint8_t in #( no|yes) ;; #( *) cat >>confdefs.h <<\_ACEOF #define _UINT8_T 1 _ACEOF cat >>confdefs.h <<_ACEOF #define uint8_t $ac_cv_c_uint8_t _ACEOF ;; esac # Checks for library functions. if test $ac_cv_c_compiler_gnu = yes; then { echo "$as_me:$LINENO: checking whether $CC needs -traditional" >&5 echo $ECHO_N "checking whether $CC needs -traditional... $ECHO_C" >&6; } if test "${ac_cv_prog_gcc_traditional+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_pattern="Autoconf.*'x'" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include Autoconf TIOCGETP _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "$ac_pattern" >/dev/null 2>&1; then ac_cv_prog_gcc_traditional=yes else ac_cv_prog_gcc_traditional=no fi rm -f conftest* if test $ac_cv_prog_gcc_traditional = no; then cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include Autoconf TCGETA _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "$ac_pattern" >/dev/null 2>&1; then ac_cv_prog_gcc_traditional=yes fi rm -f conftest* fi fi { echo "$as_me:$LINENO: result: $ac_cv_prog_gcc_traditional" >&5 echo "${ECHO_T}$ac_cv_prog_gcc_traditional" >&6; } if test $ac_cv_prog_gcc_traditional = yes; then CC="$CC -traditional" fi fi for ac_header in stdlib.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi ac_res=`eval echo '${'$as_ac_Header'}'` { echo "$as_me:$LINENO: result: $ac_res" >&5 echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? { echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? { echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------------------- ## ## Report this to Davide Libenzi ## ## ------------------------------------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval echo '${'$as_ac_Header'}'` { echo "$as_me:$LINENO: result: $ac_res" >&5 echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done { echo "$as_me:$LINENO: checking for GNU libc compatible malloc" >&5 echo $ECHO_N "checking for GNU libc compatible malloc... $ECHO_C" >&6; } if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$cross_compiling" = yes; then ac_cv_func_malloc_0_nonnull=no else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #if defined STDC_HEADERS || defined HAVE_STDLIB_H # include #else char *malloc (); #endif int main () { return ! malloc (0); ; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_malloc_0_nonnull=yes else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_malloc_0_nonnull=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi { echo "$as_me:$LINENO: result: $ac_cv_func_malloc_0_nonnull" >&5 echo "${ECHO_T}$ac_cv_func_malloc_0_nonnull" >&6; } if test $ac_cv_func_malloc_0_nonnull = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_MALLOC 1 _ACEOF else cat >>confdefs.h <<\_ACEOF #define HAVE_MALLOC 0 _ACEOF case " $LIBOBJS " in *" malloc.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS malloc.$ac_objext" ;; esac cat >>confdefs.h <<\_ACEOF #define malloc rpl_malloc _ACEOF fi for ac_header in sys/select.h sys/socket.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi ac_res=`eval echo '${'$as_ac_Header'}'` { echo "$as_me:$LINENO: result: $ac_res" >&5 echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? { echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? { echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------------------- ## ## Report this to Davide Libenzi ## ## ------------------------------------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval echo '${'$as_ac_Header'}'` { echo "$as_me:$LINENO: result: $ac_res" >&5 echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done { echo "$as_me:$LINENO: checking types of arguments for select" >&5 echo $ECHO_N "checking types of arguments for select... $ECHO_C" >&6; } if test "${ac_cv_func_select_args+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else for ac_arg234 in 'fd_set *' 'int *' 'void *'; do for ac_arg1 in 'int' 'size_t' 'unsigned long int' 'unsigned int'; do for ac_arg5 in 'struct timeval *' 'const struct timeval *'; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #ifdef HAVE_SYS_SELECT_H # include #endif #ifdef HAVE_SYS_SOCKET_H # include #endif int main () { extern int select ($ac_arg1, $ac_arg234, $ac_arg234, $ac_arg234, $ac_arg5); ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_func_select_args="$ac_arg1,$ac_arg234,$ac_arg5"; break 3 else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext done done done # Provide a safe default value. : ${ac_cv_func_select_args='int,int *,struct timeval *'} fi { echo "$as_me:$LINENO: result: $ac_cv_func_select_args" >&5 echo "${ECHO_T}$ac_cv_func_select_args" >&6; } ac_save_IFS=$IFS; IFS=',' set dummy `echo "$ac_cv_func_select_args" | sed 's/\*/\*/g'` IFS=$ac_save_IFS shift cat >>confdefs.h <<_ACEOF #define SELECT_TYPE_ARG1 $1 _ACEOF cat >>confdefs.h <<_ACEOF #define SELECT_TYPE_ARG234 ($2) _ACEOF cat >>confdefs.h <<_ACEOF #define SELECT_TYPE_ARG5 ($3) _ACEOF rm -f conftest* { echo "$as_me:$LINENO: checking whether lstat dereferences a symlink specified with a trailing slash" >&5 echo $ECHO_N "checking whether lstat dereferences a symlink specified with a trailing slash... $ECHO_C" >&6; } if test "${ac_cv_func_lstat_dereferences_slashed_symlink+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else rm -f conftest.sym conftest.file echo >conftest.file if test "$as_ln_s" = "ln -s" && ln -s conftest.file conftest.sym; then if test "$cross_compiling" = yes; then ac_cv_func_lstat_dereferences_slashed_symlink=no else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { struct stat sbuf; /* Linux will dereference the symlink and fail. That is better in the sense that it means we will not have to compile and use the lstat wrapper. */ return lstat ("conftest.sym/", &sbuf) == 0; ; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_lstat_dereferences_slashed_symlink=yes else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_lstat_dereferences_slashed_symlink=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi else # If the `ln -s' command failed, then we probably don't even # have an lstat function. ac_cv_func_lstat_dereferences_slashed_symlink=no fi rm -f conftest.sym conftest.file fi { echo "$as_me:$LINENO: result: $ac_cv_func_lstat_dereferences_slashed_symlink" >&5 echo "${ECHO_T}$ac_cv_func_lstat_dereferences_slashed_symlink" >&6; } test $ac_cv_func_lstat_dereferences_slashed_symlink = yes && cat >>confdefs.h <<_ACEOF #define LSTAT_FOLLOWS_SLASHED_SYMLINK 1 _ACEOF if test $ac_cv_func_lstat_dereferences_slashed_symlink = no; then case " $LIBOBJS " in *" lstat.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS lstat.$ac_objext" ;; esac fi { echo "$as_me:$LINENO: checking whether stat accepts an empty string" >&5 echo $ECHO_N "checking whether stat accepts an empty string... $ECHO_C" >&6; } if test "${ac_cv_func_stat_empty_string_bug+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$cross_compiling" = yes; then ac_cv_func_stat_empty_string_bug=yes else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { struct stat sbuf; return stat ("", &sbuf) == 0; ; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_stat_empty_string_bug=no else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_stat_empty_string_bug=yes fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi { echo "$as_me:$LINENO: result: $ac_cv_func_stat_empty_string_bug" >&5 echo "${ECHO_T}$ac_cv_func_stat_empty_string_bug" >&6; } if test $ac_cv_func_stat_empty_string_bug = yes; then case " $LIBOBJS " in *" stat.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS stat.$ac_objext" ;; esac cat >>confdefs.h <<_ACEOF #define HAVE_STAT_EMPTY_STRING_BUG 1 _ACEOF fi for ac_func in bzero memset select socket strcasecmp strchr strdup strerror strrchr do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` { echo "$as_me:$LINENO: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval echo '${'$as_ac_var'}'` { echo "$as_me:$LINENO: result: $ac_res" >&5 echo "${ECHO_T}$ac_res" >&6; } if test `eval echo '${'$as_ac_var'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done ac_config_files="$ac_config_files Makefile src/Makefile doc/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( *) $as_unset $ac_var ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then test "x$cache_file" != "x/dev/null" && { echo "$as_me:$LINENO: updating cache $cache_file" >&5 echo "$as_me: updating cache $cache_file" >&6;} cat confcache >$cache_file else { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi : ${CONFIG_STATUS=./config.status} ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 echo "$as_me: creating $CONFIG_STATUS" >&6;} cat >$CONFIG_STATUS <<_ACEOF #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi # PATH needs CR # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) as_nl=' ' IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 { (exit 1); exit 1; } fi # Work around bugs in pre-3.0 UWIN ksh. for as_var in ENV MAIL MAILPATH do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. for as_var in \ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ LC_TELEPHONE LC_TIME do if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var fi done # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # CDPATH. $as_unset CDPATH as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line after each line using $LINENO; the second 'sed' # does the real work. The second script uses 'N' to pair each # line-number line with the line containing $LINENO, and appends # trailing '-' during substitution so that $LINENO is not a special # case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # scripts with optimization help from Paolo Bonzini. Blame Lee # E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in -n*) case `echo 'x\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. *) ECHO_C='\c';; esac;; *) ECHO_N='-n';; esac if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir fi echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 # Save the log message, to keep $[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by ussp-push $as_me 0.11.1, which was generated by GNU Autoconf 2.61. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF cat >>$CONFIG_STATUS <<_ACEOF # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF ac_cs_usage="\ \`$as_me' instantiates files from templates according to the current configuration. Usage: $0 [OPTIONS] [FILE]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ ussp-push config.status 0.11.1 configured by $0, generated by GNU Autoconf 2.61, with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" Copyright (C) 2006 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # If no file are specified by the user, then we need to provide default # value. By we need to know if files were specified by the user. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) echo "$ac_cs_version"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift CONFIG_FILES="$CONFIG_FILES $ac_optarg" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header { echo "$as_me: error: ambiguous option: $1 Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; };; --help | --hel | -h ) echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) { echo "$as_me: error: unrecognized option: $1 Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; *) ac_config_targets="$ac_config_targets $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF if \$ac_cs_recheck; then echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 CONFIG_SHELL=$SHELL export CONFIG_SHELL exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF # # INIT-COMMANDS # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= trap 'exit_status=$? { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ' 0 trap '{ (exit 1); exit 1; }' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || { echo "$me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } # # Set up the sed scripts for CONFIG_FILES section. # # No need to generate the scripts if there are no CONFIG_FILES. # This happens for instance when ./config.status config.h if test -n "$CONFIG_FILES"; then _ACEOF ac_delim='%!_!# ' for ac_last_try in false false false false false :; do cat >conf$$subs.sed <<_ACEOF SHELL!$SHELL$ac_delim PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim PACKAGE_NAME!$PACKAGE_NAME$ac_delim PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim PACKAGE_STRING!$PACKAGE_STRING$ac_delim PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim exec_prefix!$exec_prefix$ac_delim prefix!$prefix$ac_delim program_transform_name!$program_transform_name$ac_delim bindir!$bindir$ac_delim sbindir!$sbindir$ac_delim libexecdir!$libexecdir$ac_delim datarootdir!$datarootdir$ac_delim datadir!$datadir$ac_delim sysconfdir!$sysconfdir$ac_delim sharedstatedir!$sharedstatedir$ac_delim localstatedir!$localstatedir$ac_delim includedir!$includedir$ac_delim oldincludedir!$oldincludedir$ac_delim docdir!$docdir$ac_delim infodir!$infodir$ac_delim htmldir!$htmldir$ac_delim dvidir!$dvidir$ac_delim pdfdir!$pdfdir$ac_delim psdir!$psdir$ac_delim libdir!$libdir$ac_delim localedir!$localedir$ac_delim mandir!$mandir$ac_delim DEFS!$DEFS$ac_delim ECHO_C!$ECHO_C$ac_delim ECHO_N!$ECHO_N$ac_delim ECHO_T!$ECHO_T$ac_delim LIBS!$LIBS$ac_delim build_alias!$build_alias$ac_delim host_alias!$host_alias$ac_delim target_alias!$target_alias$ac_delim INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim INSTALL_DATA!$INSTALL_DATA$ac_delim CYGPATH_W!$CYGPATH_W$ac_delim PACKAGE!$PACKAGE$ac_delim VERSION!$VERSION$ac_delim ACLOCAL!$ACLOCAL$ac_delim AUTOCONF!$AUTOCONF$ac_delim AUTOMAKE!$AUTOMAKE$ac_delim AUTOHEADER!$AUTOHEADER$ac_delim MAKEINFO!$MAKEINFO$ac_delim install_sh!$install_sh$ac_delim STRIP!$STRIP$ac_delim INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim mkdir_p!$mkdir_p$ac_delim AWK!$AWK$ac_delim SET_MAKE!$SET_MAKE$ac_delim am__leading_dot!$am__leading_dot$ac_delim AMTAR!$AMTAR$ac_delim am__tar!$am__tar$ac_delim am__untar!$am__untar$ac_delim CC!$CC$ac_delim CFLAGS!$CFLAGS$ac_delim LDFLAGS!$LDFLAGS$ac_delim CPPFLAGS!$CPPFLAGS$ac_delim ac_ct_CC!$ac_ct_CC$ac_delim EXEEXT!$EXEEXT$ac_delim OBJEXT!$OBJEXT$ac_delim DEPDIR!$DEPDIR$ac_delim am__include!$am__include$ac_delim am__quote!$am__quote$ac_delim AMDEP_TRUE!$AMDEP_TRUE$ac_delim AMDEP_FALSE!$AMDEP_FALSE$ac_delim AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim CCDEPMODE!$CCDEPMODE$ac_delim am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim build!$build$ac_delim build_cpu!$build_cpu$ac_delim build_vendor!$build_vendor$ac_delim build_os!$build_os$ac_delim host!$host$ac_delim host_cpu!$host_cpu$ac_delim host_vendor!$host_vendor$ac_delim host_os!$host_os$ac_delim SED!$SED$ac_delim GREP!$GREP$ac_delim EGREP!$EGREP$ac_delim LN_S!$LN_S$ac_delim ECHO!$ECHO$ac_delim AR!$AR$ac_delim RANLIB!$RANLIB$ac_delim DSYMUTIL!$DSYMUTIL$ac_delim NMEDIT!$NMEDIT$ac_delim CPP!$CPP$ac_delim CXX!$CXX$ac_delim CXXFLAGS!$CXXFLAGS$ac_delim ac_ct_CXX!$ac_ct_CXX$ac_delim CXXDEPMODE!$CXXDEPMODE$ac_delim am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim _ACEOF if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then break elif $ac_last_try; then { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` if test -n "$ac_eof"; then ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ac_eof=`expr $ac_eof + 1` fi cat >>$CONFIG_STATUS <<_ACEOF cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof /@[a-zA-Z_][a-zA-Z_0-9]*@/!b _ACEOF sed ' s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g s/^/s,@/; s/!/@,|#_!!_#|/ :n t n s/'"$ac_delim"'$/,g/; t s/$/\\/; p N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF CEOF$ac_eof _ACEOF ac_delim='%!_!# ' for ac_last_try in false false false false false :; do cat >conf$$subs.sed <<_ACEOF am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim CXXCPP!$CXXCPP$ac_delim F77!$F77$ac_delim FFLAGS!$FFLAGS$ac_delim ac_ct_F77!$ac_ct_F77$ac_delim LIBTOOL!$LIBTOOL$ac_delim PKG_CONFIG!$PKG_CONFIG$ac_delim BLUETOOTH_CFLAGS!$BLUETOOTH_CFLAGS$ac_delim BLUETOOTH_LIBS!$BLUETOOTH_LIBS$ac_delim OPENOBEX_CFLAGS!$OPENOBEX_CFLAGS$ac_delim OPENOBEX_LIBS!$OPENOBEX_LIBS$ac_delim LIBOBJS!$LIBOBJS$ac_delim LTLIBOBJS!$LTLIBOBJS$ac_delim _ACEOF if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 13; then break elif $ac_last_try; then { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` if test -n "$ac_eof"; then ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ac_eof=`expr $ac_eof + 1` fi cat >>$CONFIG_STATUS <<_ACEOF cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof /@[a-zA-Z_][a-zA-Z_0-9]*@/!b end _ACEOF sed ' s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g s/^/s,@/; s/!/@,|#_!!_#|/ :n t n s/'"$ac_delim"'$/,g/; t s/$/\\/; p N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF :end s/|#_!!_#|//g CEOF$ac_eof _ACEOF # VPATH may cause trouble with some makes, so we remove $(srcdir), # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/ s/:*\${srcdir}:*/:/ s/:*@srcdir@:*/:/ s/^\([^=]*=[ ]*\):*/\1/ s/:*$// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF fi # test -n "$CONFIG_FILES" for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 echo "$as_me: error: Invalid tag $ac_tag." >&2;} { (exit 1); exit 1; }; };; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 echo "$as_me: error: cannot find input file: $ac_f" >&2;} { (exit 1); exit 1; }; };; esac ac_file_inputs="$ac_file_inputs $ac_f" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input="Generated from "`IFS=: echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { echo "$as_me:$LINENO: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} fi case $ac_tag in *:-:* | *:-) cat >"$tmp/stdin";; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` { as_dir="$ac_dir" case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= case `sed -n '/datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p ' $ac_file_inputs` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF sed "$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s&@configure_input@&$configure_input&;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t $ac_datarootdir_hack " $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&5 echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&2;} rm -f "$tmp/stdin" case $ac_file in -) cat "$tmp/out"; rm -f "$tmp/out";; *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; esac ;; :H) # # CONFIG_HEADER # _ACEOF # Transform confdefs.h into a sed script `conftest.defines', that # substitutes the proper values into config.h.in to produce config.h. rm -f conftest.defines conftest.tail # First, append a space to every undef/define line, to ease matching. echo 's/$/ /' >conftest.defines # Then, protect against being on the right side of a sed subst, or in # an unquoted here document, in config.status. If some macros were # called several times there might be several #defines for the same # symbol, which is useless. But do not sort them, since the last # AC_DEFINE must be honored. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* # These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where # NAME is the cpp macro being defined, VALUE is the value it is being given. # PARAMS is the parameter list in the macro definition--in most cases, it's # just an empty string. ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*' ac_dB='\\)[ (].*,\\1define\\2' ac_dC=' ' ac_dD=' ,' uniq confdefs.h | sed -n ' t rset :rset s/^[ ]*#[ ]*define[ ][ ]*// t ok d :ok s/[\\&,]/\\&/g s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p ' >>conftest.defines # Remove the space that was appended to ease matching. # Then replace #undef with comments. This is necessary, for # example, in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. # (The regexp can be short, since the line contains either #define or #undef.) echo 's/ $// s,^[ #]*u.*,/* & */,' >>conftest.defines # Break up conftest.defines: ac_max_sed_lines=50 # First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1" # Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2" # Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1" # et cetera. ac_in='$ac_file_inputs' ac_out='"$tmp/out1"' ac_nxt='"$tmp/out2"' while : do # Write a here document: cat >>$CONFIG_STATUS <<_ACEOF # First, check the format of the line: cat >"\$tmp/defines.sed" <<\\CEOF /^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def /^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def b :def _ACEOF sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS echo 'CEOF sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail grep . conftest.tail >/dev/null || break rm -f conftest.defines mv conftest.tail conftest.defines done rm -f conftest.defines conftest.tail echo "ac_result=$ac_in" >>$CONFIG_STATUS cat >>$CONFIG_STATUS <<\_ACEOF if test x"$ac_file" != x-; then echo "/* $configure_input */" >"$tmp/config.h" cat "$ac_result" >>"$tmp/config.h" if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 echo "$as_me: $ac_file is unchanged" >&6;} else rm -f $ac_file mv "$tmp/config.h" $ac_file fi else echo "/* $configure_input */" cat "$ac_result" fi rm -f "$tmp/out12" # Compute $ac_file's index in $config_headers. _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $ac_file | $ac_file:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $ac_file" >`$as_dirname -- $ac_file || $as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X$ac_file : 'X\(//\)[^/]' \| \ X$ac_file : 'X\(//\)$' \| \ X$ac_file : 'X\(/\)' \| . 2>/dev/null || echo X$ac_file | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # So let's grep whole file. if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` { as_dir=$dirpart/$fdir case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ;; esac done # for ac_tag { (exit 0); exit 0; } _ACEOF chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || { (exit 1); exit 1; } fi ussp-push-0.11.orig/install-sh0000755000175000017500000002202111054344465016202 0ustar hendrikhendrik#!/bin/sh # install - install a program, script, or datafile scriptversion=2005-05-14.22 # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. It can only install one file at a time, a restriction # shared with many OS's install programs. # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" cpprog="${CPPROG-cp}" chmodprog="${CHMODPROG-chmod}" chownprog="${CHOWNPROG-chown}" chgrpprog="${CHGRPPROG-chgrp}" stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" chmodcmd="$chmodprog 0755" chowncmd= chgrpcmd= stripcmd= rmcmd="$rmprog -f" mvcmd="$mvprog" src= dst= dir_arg= dstarg= no_target_directory= usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... In the 1st form, copy SRCFILE to DSTFILE. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: -c (ignored) -d create directories instead of installing files. -g GROUP $chgrpprog installed files to GROUP. -m MODE $chmodprog installed files to MODE. -o USER $chownprog installed files to USER. -s $stripprog installed files. -t DIRECTORY install into DIRECTORY. -T report an error if DSTFILE is a directory. --help display this help and exit. --version display version info and exit. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " while test -n "$1"; do case $1 in -c) shift continue;; -d) dir_arg=true shift continue;; -g) chgrpcmd="$chgrpprog $2" shift shift continue;; --help) echo "$usage"; exit $?;; -m) chmodcmd="$chmodprog $2" shift shift continue;; -o) chowncmd="$chownprog $2" shift shift continue;; -s) stripcmd=$stripprog shift continue;; -t) dstarg=$2 shift shift continue;; -T) no_target_directory=true shift continue;; --version) echo "$0 $scriptversion"; exit $?;; *) # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. test -n "$dir_arg$dstarg" && break # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dstarg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dstarg" shift # fnord fi shift # arg dstarg=$arg done break;; esac done if test -z "$1"; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call `install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi for src do # Protect names starting with `-'. case $src in -*) src=./$src ;; esac if test -n "$dir_arg"; then dst=$src src= if test -d "$dst"; then mkdircmd=: chmodcmd= else mkdircmd=$mkdirprog fi else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dstarg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dstarg # Protect names starting with `-'. case $dst in -*) dst=./$dst ;; esac # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test -n "$no_target_directory"; then echo "$0: $dstarg: Is a directory" >&2 exit 1 fi dst=$dst/`basename "$src"` fi fi # This sed command emulates the dirname command. dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'` # Make sure that the destination directory exists. # Skip lots of stat calls in the usual case. if test ! -d "$dstdir"; then defaultIFS=' ' IFS="${IFS-$defaultIFS}" oIFS=$IFS # Some sh's can't handle IFS=/ for some reason. IFS='%' set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` shift IFS=$oIFS pathcomp= while test $# -ne 0 ; do pathcomp=$pathcomp$1 shift if test ! -d "$pathcomp"; then $mkdirprog "$pathcomp" # mkdir can fail with a `File exist' error in case several # install-sh are creating the directory concurrently. This # is OK. test -d "$pathcomp" || exit fi pathcomp=$pathcomp/ done fi if test -n "$dir_arg"; then $doit $mkdircmd "$dst" \ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } else dstfile=`basename "$dst"` # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 trap '(exit $?); exit' 1 2 13 15 # Copy the file name to the temp name. $doit $cpprog "$src" "$dsttmp" && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && # Now rename the file to the real destination. { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ || { # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { if test -f "$dstdir/$dstfile"; then $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ || { echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 (exit 1); exit 1 } else : fi } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" } } fi || { (exit 1); exit 1; } done # The final little trick to "correctly" pass the exit status to the exit trap. { (exit 0); exit 0 } # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: ussp-push-0.11.orig/missing0000755000175000017500000002540611054344465015607 0ustar hendrikhendrik#! /bin/sh # Common stub for a few missing GNU programs while installing. scriptversion=2005-06-08.21 # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA # 02110-1301, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi run=: # In the cases where this matters, `missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi msg="missing on your system" case "$1" in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 # Exit code 63 means version mismatch. This often happens # when the user try to use an ancient version of a tool on # a file that requires a minimum version. In this case we # we should proceed has if the program had been absent, or # if --run hadn't been passed. if test $? = 63; then run=: msg="probably too old" fi ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch] Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; esac # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect # the program). case "$1" in lex|yacc) # Not GNU programs, they don't have --version. ;; tar) if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then exit 1 fi ;; *) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then # Could not run --version or --help. This is probably someone # running `$TOOL --version' or `$TOOL --help' to check whether # $TOOL exists and not knowing $TOOL uses missing. exit 1 fi ;; esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. case "$1" in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do case "$f" in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; esac done touch $touch_files ;; automake*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; autom4te) echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the proper tools for further handling them. You can get \`$1' as part of \`Autoconf' from any GNU archive site." file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo "#! /bin/sh" echo "# Created by GNU Automake missing as a replacement of" echo "# $ $@" echo "exit 0" chmod +x $file exit 1 fi ;; bison|yacc) echo 1>&2 "\ WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.h fi ;; esac fi if [ ! -f y.tab.h ]; then echo >y.tab.h fi if [ ! -f y.tab.c ]; then echo 'main() { return 0; }' >y.tab.c fi ;; lex|flex) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if [ ! -f lex.yy.c ]; then echo 'main() { return 0; }' >lex.yy.c fi ;; help2man) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` fi if [ -f "$file" ]; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" exit 1 fi ;; makeinfo) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then # ... or it is the one specified with @setfilename ... infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` # ... or it is derived from the source name (dir/f.texi becomes f.info) test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi # If the file does not exist, the user really needs makeinfo; # let's fail without touching anything. test -f $file || exit 1 touch $file ;; tar) shift # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error # messages. if (gnutar --version > /dev/null 2>&1); then gnutar "$@" && exit 0 fi if (gtar --version > /dev/null 2>&1); then gtar "$@" && exit 0 fi firstarg="$1" if shift; then case "$firstarg" in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac case "$firstarg" in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 ;; esac fi echo 1>&2 "\ WARNING: I can't seem to be able to run \`tar' with the given arguments. You may want to install GNU tar or Free paxutils, or check the command line arguments." exit 1 ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and is $msg. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: ussp-push-0.11.orig/INSTALL0000644000175000017500000002243211054344465015235 0ustar hendrikhendrikInstallation Instructions ************************* Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free Software Foundation, Inc. This file is free documentation; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. Basic Installation ================== These are generic installation instructions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). It can also use an optional file (typically called `config.cache' and enabled with `--cache-file=config.cache' or simply `-C') that saves the results of its tests to speed up reconfiguring. (Caching is disabled by default to prevent problems with accidental use of stale cache files.) If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can be considered for the next release. If you are using the cache, and at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.ac' (or `configure.in') is used to create `configure' by a program called `autoconf'. You only need `configure.ac' if you want to change it or regenerate `configure' using a newer version of `autoconf'. The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. If you're using `csh' on an old version of System V, you might need to type `sh ./configure' instead to prevent `csh' from trying to execute `configure' itself. Running `configure' takes awhile. While running, it prints some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with the package. 4. Type `make install' to install the programs and any data files and documentation. 5. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is also a `make maintainer-clean' target, but that is intended mainly for the package's developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution. Compilers and Options ===================== Some systems require unusual options for compilation or linking that the `configure' script does not know about. Run `./configure --help' for details on some of the pertinent environment variables. You can give `configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here is an example: ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix *Note Defining Variables::, for more details. Compiling For Multiple Architectures ==================================== You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. If you have to use a `make' that does not support the `VPATH' variable, you have to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. Installation Names ================== By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the option `--prefix=PREFIX'. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you pass the option `--exec-prefix=PREFIX' to `configure', the package uses PREFIX as the prefix for installing programs and libraries. Documentation and other data files still use the regular prefix. In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Optional Features ================= Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The `README' should mention any `--enable-' and `--with-' options that the package recognizes. For packages that use the X Window System, `configure' can usually find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. Specifying the System Type ========================== There may be some features `configure' cannot figure out automatically, but needs to determine by the type of machine the package will run on. Usually, assuming the package is built to be run on the _same_ architectures, `configure' can figure that out, but if it prints a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: CPU-COMPANY-SYSTEM where SYSTEM can have one of these forms: OS KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the machine type. If you are _building_ compiler tools for cross-compiling, you should use the option `--target=TYPE' to select the type of system they will produce code for. If you want to _use_ a cross compiler, that generates code for a platform different from the build platform, you should specify the "host" platform (i.e., that on which the generated programs will eventually be run) with `--host=TYPE'. Sharing Defaults ================ If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. Defining Variables ================== Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set them in the `configure' command line, using `VAR=value'. For example: ./configure CC=/usr/local2/bin/gcc causes the specified `gcc' to be used as the C compiler (unless it is overridden in the site shell script). Here is a another example: /bin/bash ./configure CONFIG_SHELL=/bin/bash Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent configuration-related scripts to be executed by `/bin/bash'. `configure' Invocation ====================== `configure' recognizes the following options to control how it operates. `--help' `-h' Print a summary of the options to `configure', and exit. `--version' `-V' Print the version of Autoconf used to generate the `configure' script, and exit. `--cache-file=FILE' Enable the cache: use and save the results of the tests in FILE, traditionally `config.cache'. FILE defaults to `/dev/null' to disable caching. `--config-cache' `-C' Alias for `--cache-file=config.cache'. `--quiet' `--silent' `-q' Do not print messages saying which checks are being made. To suppress all normal output, redirect it to `/dev/null' (any error messages will still be shown). `--srcdir=DIR' Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. `configure' also accepts some other, not widely useful, options. Run `configure --help' for more details. ussp-push-0.11.orig/Makefile.in0000644000175000017500000004531211054344465016253 0ustar hendrikhendrik# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ config.guess config.sub depcomp install-sh ltmain.sh missing subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BLUETOOTH_CFLAGS = @BLUETOOTH_CFLAGS@ BLUETOOTH_LIBS = @BLUETOOTH_LIBS@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DSYMUTIL = @DSYMUTIL@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ F77 = @F77@ FFLAGS = @FFLAGS@ GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ NMEDIT = @NMEDIT@ OBJEXT = @OBJEXT@ OPENOBEX_CFLAGS = @OPENOBEX_CFLAGS@ OPENOBEX_LIBS = @OPENOBEX_LIBS@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ SUBDIRS = src doc all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ cd $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) cd $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(am__configure_deps) cd $(top_srcdir) && $(AUTOHEADER) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) mkdir $(distdir) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ done -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile config.h installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-exec-am: install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-info-am uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ check-am clean clean-generic clean-libtool clean-recursive \ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ dist-shar dist-tarZ dist-zip distcheck distclean \ distclean-generic distclean-hdr distclean-libtool \ distclean-recursive distclean-tags distcleancheck distdir \ distuninstallcheck dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-exec \ install-exec-am install-info install-info-am install-man \ install-strip installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ maintainer-clean-recursive mostlyclean mostlyclean-generic \ mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am uninstall-info-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: ussp-push-0.11.orig/depcomp0000755000175000017500000003710011054344465015557 0ustar hendrikhendrik#! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2005-07-09.11 # Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA # 02110-1301, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try \`$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by `PROGRAMS ARGS'. object Object file output by `PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputing dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit $? ;; -v | --v*) echo "depcomp $scriptversion" exit $? ;; esac if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the `deleted header file' problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. tr ' ' ' ' < "$tmpdepfile" | ## Some versions of gcc put a space before the `:'. On the theory ## that the space means something, we add a space to the output as ## well. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like `#:fec' to the end of the # dependency line. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' ' ' ' >> $depfile echo >> $depfile # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> $depfile else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts `$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` tmpdepfile="$stripped.u" if test "$libtool" = yes; then "$@" -Wc,-M else "$@" -M fi stat=$? if test -f "$tmpdepfile"; then : else stripped=`echo "$stripped" | sed 's,^.*/,,'` tmpdepfile="$stripped.u" fi if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi if test -f "$tmpdepfile"; then outname="$stripped.o" # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; icc) # Intel's C compiler understands `-MD -MF file'. However on # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c # ICC 7.0 will fill foo.d with something like # foo.o: sub/foo.c # foo.o: sub/foo.h # which is wrong. We want: # sub/foo.o: sub/foo.c # sub/foo.o: sub/foo.h # sub/foo.c: # sub/foo.h: # ICC 7.1 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using \ : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in `foo.d' instead, so we check for that too. # Subdirectories are respected. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then # With Tru64 cc, shared objects can also be used to make a # static library. This mecanism is used in libtool 1.4 series to # handle both shared and static libraries in a single compilation. # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. # # With libtool 1.5 this exception was removed, and libtool now # generates 2 separate objects for the 2 libraries. These two # compilations output dependencies in in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 tmpdepfile2=$dir$base.o.d # libtool 1.5 tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.o.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d tmpdepfile4=$dir$base.d "$@" -MD fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for `:' # in the target name. This is to cope with DOS-style filenames: # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. "$@" $dashmflag | sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tr ' ' ' ' < "$tmpdepfile" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # X makedepend shift cleared=no for arg in "$@"; do case $cleared in no) set ""; shift cleared=yes ;; esac case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix="`echo $object | sed 's/^.*\././'`" touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" sed '1,2d' "$tmpdepfile" | tr ' ' ' ' | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o, # because we must use -o when running libtool. "$@" || exit $? IFS=" " for arg do case "$arg" in "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: